Ferroelectricity in Ethylammonium Bismuth-Based Organic-Inorganic Hybrid: (C2H5NH3)2[BiBr5]

Pressure-induced shape and color changes and mechanical-stimulation-driven reverse transition in a one-dimensional hybrid halide

Dynamic crystals with directional deformations in response to external stimuli through molecular reconfiguration, are observed predominantly in certain organic crystals and metal complexes. Low-dimensional hybrid halides, resemble these materials due to the presence of strong hydrogen bonds between bulky organic moieties and inorganic units, whereas their dynamic behavior remains largely unexplored. Here we show that a one-dimensional hybrid halide (MV)BiBr5 (MV = methylviologen) undergoes an isosymmetric phase transition at hydrostatic pressure of 0.20 GPa, accompanied by a remarkable length expansion of 20-30% and red to dark yellow color change. Unexpectedly, the backward transition can be fully reversed by mechanical stimulation rather than decompression. In the high-pressure phase, the coexistence of strong Bi3+ lone pair stereochemical activity and large reorientations of the planar MV2+ cations, together with the newly formed CH···Br hydrogen interactions, are the structural features that facilitate microscopic changes and stabilize the metastable high-pressure phase at ambient conditions.

Ferroelectric Organic-Inorganic Hybrid Ammonium Halogenobismuthate(III) for Piezoelectric Energy Harvesting

Halogenobismuthate(III) compounds are of recent interest because of their low toxicity and distinct electrical properties. The utility of these materials as ferroelectrics for piezoelectric energy harvesters is still in its early stages. Herein, we report a hybrid ammonium halogenobismuthate(III) [BPBrDMA]2·[BiBr5], crystallizing in a ferroelectrically active polar noncentrosymmetric Pna21 space group. Its noncentrosymmetric structure was confirmed by the detection of the second harmonic generation response. The ferroelectric P-E hysteresis loop measurements on the thin film sample of [BPBrDMA]2·[BiBr5] gave a saturation polarization (Ps) of 5.72 μC cm-2. The piezoresponse force microscopy analysis confirmed its ferroelectric and piezoelectric nature, showing characteristic domain structures and signature hysteresis and butterfly loops. The piezoelectric energy harvesting attributes of [BPBrDMA]2·[BiBr5] were further probed on its polylactic acid (PLA) composites. The 15 wt % [BPBrDMA]2·[BiBr5]-PLA polymer composite resulted in a high output voltage of 26.2 V and power density of 15.47 μW cm-2. The energy harvested from this device was further utilized for charging a 10 μF capacitor within 3 min.

Spectroscopic Evidence of Localized Small Polarons in Low-Dimensional Ionic Liquid Lead-Free Hybrid Perovskites

Rational design is an important approach to consider in the development of low-dimensional hybrid organic-inorganic perovskites (HOIPs). In this study, 1-butyl-1-methyl pyrrolidinium (BMP), 1-(3-aminopropyl)imidazole (API), and 1-butyl-3-methyl imidazolium (BMI) serve as prototypical ionic liquid components in bismuth-based HOIPs. Element-sensitive X-ray absorption spectroscopy measurements of BMPBiBr4 and APIBiBr5 reveal distinct resonant excitation profiles across the N K-edges, where contrasting peak shifts are observed. These 1D-HOIPs exhibit a large Stokes shift due to the small polaron contribution, as probed by photoluminescence spectroscopy at room temperature. Interestingly, the incorporation of a small fraction of tin (Sn) into the APIBiBr5 (Sn/Bi mole ratio of 1:3) structure demonstrates a strong spectral weight transfer accompanied by a fast decay lifetime (2.6 ns). These phenomena are the direct result of Sn-substitution in APIBiBr5, decreasing the small polaron effect. By changing the active ionic liquid, the electronic interactions and optical responses can be moderately tuned by alteration of their intermolecular interaction between the semiconducting inorganic layers and organic moieties.

Unusual isostructural Br/I substitution effect on the crystal structure and optical properties of hybrid halobismuthates

The gradual change of the optical properties of solid solutions by variation of the halogen composition is shown.

Ferroelectric hybrid organic-inorganic perovskites and their structural and functional diversity

Molecular ferroelectrics have gradually aroused great interest in both fundamental scientific research and technological applications because of their easy processing, light weight and mechanical flexibility. Hybrid organic-inorganic perovskite ferroelectrics (HOIPFs), as a class of molecule-based ferroelectrics, have diverse functionalities owing to their unique structure and have become a hot spot in molecular ferroelectrics research. Therefore, they are extremely attractive in the field of ferroelectrics. However, there seems to be a lack of systematic review of their design, performance and potential applications. Herein, we review the recent development of HOIPFs from lead-based, lead-free and metal-free perovskites, and outline the versatility of these ferroelectrics, including piezoelectricity for mechanical energy-harvesting and optoelectronic properties for photovoltaics and light detection. Furthermore, a perspective view of the challenges and future directions of HOIPFs is also highlighted.

Recent advances on structural, thermal, vibrational, optical, phase transitions, and catalysis properties of alkylenediammonium halogenometallate materials (Metal: Bi, Sb, Halogen: Cl, Br, I)

This paper aims to review recent advances on synthesis, crystal structures, thermal, spectroscopic, phase transitions, optical, dielectric, and catalysis properties of hydrate and anhydrous alkylenediammonium halogenometallates materials (Metal: Bi, Sb, Halogen: Cl, Br, I). These hybrid materials present rich structural diversities based on octahedra forming infinite zero dimensional, 1-dimensional chains, 2-dimensional layers, discrete bioctahedra, and discrete tetramer units. The effect, contribution and importance of hydrogen bonding N–H … X (X: Cl, Br, I) are reviewed in terms of solid state relationship. Particularly, a comparative study is made on hydrate and anyhdrous aliphatic chlorobismuthates with alkylenediammonium +NH3(CH2) n NH3 + based on structural data and V/Z variation with (CH2) n chains (n = 2–8, 12), and variation of BiCl6 3− Raman frequencies modes versus (CH2) n chains (n = 3–8). Hydrate salts with (n = 3, 12) consist of isolated BiCl6 3− anions and two water molecules, against others ones with isolated anionic chains [BiCl5 2−] n or Bi2Cl10 4− dimers, formed by distorted octahedra BiCl6 3− sharing corners, vices or edges. The reviewed optical and electronic band gaps suggested interesting compounds with band gaps (1.85–2.4 eV), as suitable materials in optoelectronic properties, photoactive layer in solution-processed photovoltaics, and bio-imaging or photovoltaic applications. It was concluded that iodobismuthate salts have generally the lowest bands gap, compared to that of bromo and chlorobismuthate slats. Catalysis proprieties are reviewed n fast (RhB) degradation under dark conditions for (C4N2H7)4Bi2Cl10, (C5H9N2)BiI4, and {(H-BPA)4·[(BiI6)I13]·2I3} n , and in organic salts synthesis under solvent-free conditions. Herein NH3(CH2) n NH3BiCl5 (n = 5–7) salts were used as highly efficient catalysts, which is a novel tendency in chlorobismuthate researchs in the green chemistry field.

Efficient Piezoelectric Energy Harvesting from a Discrete Hybrid Bismuth Bromide Ferroelectric Templated by Phosphonium Cation

Bismuth containing hybrid molecular ferroelectrics are receiving tremendous attention in recent years owing to their stable and non-toxic composition. However, these perovskite-like structures are primarily limited to ammonium cations. Herein, we report a new phosphonium based discrete perovskite-like hybrid ferroelectric with a formula [Me(Ph)₃ P]₃ [Bi₂ Br₉ ] (MTPBB) and its mechanical energy harvesting capability. The Polarization-Electric field (P-E) measurements resulted in a well-defined ferroelectric hysteresis loop with a remnant polarization value of 2.1 μC cm^-2 . Piezoresponse force microscopy experiments enabled visualization of the ferroelectric domain structure and evaluation of the piezoelectric strain coefficient (d₃₃ ) for an MTPBB single crystal and thin film sample. Furthermore, flexible devices incorporating MTPBB in polydimethylsiloxane (PDMS) matrix at various concentrations were fabricated and explored for their mechanical energy harvesting properties. The champion device with 20 wt % of MTPBB in PDMS rendered a maximum peak-to-peak open-circuit voltage of 22.9 V and a maximum power density of 7 μW cm^-2 at an optimal load of 4 MΩ. Moreover, the potential of MTPBB-based devices in low power electronics was demonstrated by storing the harvested energy in various electrolytic capacitors.

Dichlorine-containing chlorobismuthate(iii) supramolecular hybrid: structure and experimental studies of stability

The chlorine-rich complex (Me4N)3{[Bi2Cl9](Cl2)} (1) features dichlorine units incorporated into a chlorometalate matrix via halogen bonding.

Centimeter-Sized Single Crystal of a One-Dimensional Lead-Free Mixed-Cation Perovskite Ferroelectric for Highly Polarization Sensitive Photodetection

Linear dichroic anisotropic photonic materials are highly attractive due to their great potentials in many applications, which in combination with the ferroelectric properties could broaden their research and applications. However, to date, the linear dichroism conversion phenomenon has not been observed in one-dimensional (1D) large-size single-crystal materials: in particular, lead-free perovskite ferroelectric crystals. Here, we propose a new ferroelectric design strategy: namely, partial organic cation substitution for precisely designing 1D polarization-sensitive perovskite ferroelectrics. As an example, the 1D mixed-cation perovskite ferroelectric (n-propylammonium)(methylammonium)SbBr₅ was synthesized, which exhibits a fascinating ferroelectricity with a notable reversible polarization of 2.9 μC/cm² and a large ferroelectricity-driven polarization ratio of 6.9. Importantly, the single-crystalline photodetectors also exhibit superior optoelectronic anisotropic performances at the paraelectric phase, having a large photoelectric anisotropy ratio (∼35), an excellent polarization-sensitive dichroism ratio (∼1.31), highly sensitive detectivity up to ∼10⁹ Jones, and a fast response rate (∼45/68 μs). This finding provides a significant and effective pathway for the targeted design of new functional lead-free linear dichroic anisotropic photonic ferroelectrics.

Towards ferroelectricity-inducing chains of halogenoantimonates(iii) and halogenobismuthates(iii)

In halogenoantimonate(iii) and halogenobismuthate(iii) organic–inorganic hybrids, chains of trans-connected octahedra, trans-[MX₅]_∞, are considered attractive anionic structures for inducing ferroelectricity. The latter is realized by displacing the bridging halogen atoms along the chain direction – the process that changes the polarity of the whole unit. Advances in the identification of such materials have been hindered, however, by substantial difficulty in obtaining such structures. Here we investigate structural and dielectric properties of three families of compounds based on 2-mercaptopyrimidinium, 2-aminopyrimidinium, and 2-amino-4-methylpyrimidinium cations in which 8 out of 12 compounds show trans-[MX₅]_∞ chains in their crystal structures. Two of the compounds adopt a polar P2₁ space group and are potentially ferroelectric. We perform a detailed structural analysis of all compounds with trans-[MX₅]_∞ chains discovered by far to understand the factors that lead to the chains' formation. We reveal that the size of a cation predominantly defines the accessibility of structures with this anionic form and we provide rules for designing hybrids with trans-[MX₅]_∞ chains to help guide future efforts to engineer materials with interesting non-linear electrical properties.

A discovered abundance of structures with rare and highly-desired anionic chains is examined to identify structural factors leading to the chains' formation.

Molecular motion of halogenated ethylammonium/[18]crown-6 supramolecular ions in nickel dithiolate magnetic crystals

Supramolecular cations, consisting of ethylammonium derivatives (X–CH₂CH₂–NH₃⁺) complexed with [18]crown-6, were incorporated into [Ni(dmit)₂]⁻ crystals in order to promote molecular motion.

(C2H5NH3)3[InBr6]: an indium(iii) organic–inorganic hybrid phase transition compound exhibiting a switchable dielectric response

The organic–inorganic hybrid compound (C2H5NH3)3[InBr6] undergoes a phase transition at 248/253 K, and exhibits a switchable dielectric response. The phase transition is associated with the order–disorder changes of ethylammonium cations.

Efficient Lone-Pair-Driven Luminescence: Structure-Property Relationships in Emissive 5s2 Metal Halides

Low-dimensional metal halides have been the focus of intense investigations in recent years following the success of hybrid lead halide perovskites as optoelectronic materials. In particular, the light emission of low-dimensional halides based on the 5s2 cations Sn2+ and Sb3+ has found utility in a variety of applications complementary to those of the three-dimensional halide perovskites because of its unusual properties such as broadband character and highly temperature-dependent lifetime. These properties derive from the exceptional chemistry of the 5s2 lone pair, but the terminology and explanations given for such emission vary widely, hampering efforts to build a cohesive understanding of these materials that would lead to the development of efficient optoelectronic devices. In this Perspective, we provide a structural overview of these materials with a focus on the dynamics driven by the stereoactivity of the 5s2 lone pair to identify the structural features that enable strong emission. We unite the different theoretical models that have been able to explain the success of these bright 5s2 emission centers into a cohesive framework, which is then applied to the array of compounds recently developed by our group and other researchers, demonstrating its utility and generating a holistic picture of the field from the point of view of a materials chemist. We highlight those state-of-the-art materials and applications that demonstrate the unique capabilities of these versatile emissive centers and identify promising future directions in the field of low-dimensional 5s2 metal halides.

Correlation between crystal structures and polar (ferroelectric) properties of hybrids of haloantimonates(iii) and halobismuthates(iii)

Halogenoantimonates(iii) and halogenobismuthates(iii) are a highly versatile class of organic–inorganic hybrid materials, applicable in optoelectronics and switchable dielectric devices.