3-Sulfanyl-4-methylpentan-1-ol in Dry-Hopped Beers: First Evidence of Glutathione S-Conjugates in Hop (Humulus lupulus L.)

Overlooked and misunderstood: can glutathione conjugates be clues to understanding plant glutathione transferases?

Plant glutathione transferases (GSTs) constitute a large and diverse family of enzymes that are involved in plant stress response, metabolism and defence, yet their physiological functions remain largely elusive. Consistent with the traditional view on GSTs across organisms as detoxification enzymes, in vitro most plant GSTs catalyse glutathionylation, conjugation of the tripeptide glutathione (GSH; γ-Glu-Cys-Gly) onto reactive molecules. However, when it comes to elucidating GST functions, it remains a key challenge that the endogenous plant glutathione conjugates (GS-conjugates) that would result from such glutathionylation reactions are rarely reported. Furthermore, GSTs often display high substrate promiscuity, and their proposed substrates are prone to spontaneous chemical reactions with GSH; hence, single-gene knockouts rarely provide clear chemotypes or phenotypes. In a few cases, GS-conjugates are demonstrated to be biosynthetic intermediates that are rapidly further metabolized towards a pathway end product, explaining their low abundance and rare detection. In this review, we summarize the current knowledge of plant GST functions and how and possibly why evolution has resulted in a broad and extensive expansion of the plant GST family. Finally, we demonstrate that endogenous GS-conjugates are more prevalent in plants than assumed and suggest they are overlooked as clues towards the identification of plant GST functions. This article is part of the theme issue 'The evolution of plant metabolism'.

Current strategies for the management of valuable compounds from hops waste for a circular economy

World beer production generates large volumes of waste discharged with every brew. Recently, new methods of reducing and reusing hops waste: hot trub (HT), and brewer-spent hops (BSH) are being exploited to improve the circular economy processes. This review outlines the current achievements in the management of hops waste. Following an in-depth review of various scientific publications, current strategies are discussed as a sustainable alternative to food waste exploitation and an inexpensive source of valuable compounds. Moreover, key aspects concerning the nutritional value of hops waste and the potential to enhance the functional properties of food and beverages are highlighted. Due to their nutritional composition, hops residues may be used as prospective sources of added-value co-products or additives for food enrichment, especially for products rich in fat, or as a new source of vegetable protein.

Effects of Dry-Hopping on Beer Chemistry and Sensory Properties-A Review

Dry-hopping is the addition of hops to the wort on the cold side of the brewing process. Unlike standard hop additions, its main purpose is not to produce a characteristic bitterness but to extract as much of the hop essential oils as possible, which are largely lost in the standard hopping process. When dry-hopped, it is possible to obtain a beer with an aroma that is difficult to achieve when hops are used on the hot side of the brewing process. As a result, this process has become very popular in recent years, particularly in beers that belong to the 'craft beer revolution' trend. In addition, the usefulness of this process is increasing with the development of new hop varieties with unique aromas. This article presents the main components of hops, focusing on those extracted during the process. Changes in the composition of beer bittering compounds and essential oils resulting from this process are discussed. This paper presents the current state of the knowledge on the factors affecting the degree of extraction, such as hop dosage, the time, and temperature of the process. Issues such as process-related physicochemical changes, hop creep, low flavor stability, haze formation, and green flavor are also discussed.

Evidence of Enzymatic and Chemical Interconversions of Barley Malt 3-Sulfanylhexanol Conjugates during Mashing

Recent studies have highlighted in malt the occurrence of the glutathionylated precursor of 3-sulfanylhexanol (G-3SHol) at concentrations reaching hundreds of μg/kg. Here, SIDA-LC-MS/MS was used to investigate the potential conversion of G-3SHol to its dipeptide and cysteinyl analogues during mashing. At 45 and 55 °C, malt γGT and carboxypeptidase activities quickly degrade G-3SHol (up to 90% loss), first to the cysteinylglycine conjugate and then to the cysteine conjugate (up to 205% increase). No γ-glutamylcysteine S-conjugate formation is observed. At 80 °C, despite enzyme inactivation, the G-3SHol level decreases steadily because of suspected imine formation with wort aldehydes at pH 5.5. More surprisingly, CysGly-3SHol is still generated at 80 °C. This indicates the presence in the wort of as yet unidentified precursors.

Examining How the Fermentation Medium Influences Thiol Expression and Its Perceived Aroma in Commercial Brewing Yeast Strains

In Saccharomyces, the IRC7 gene encodes for a cysteine S-conjugate β-lyase enzyme which can release polyfunctional thiols from their cysteinylated precursor forms, thereby promoting thiol aroma in beer. This study examined the thiol production of 10 commercial yeast strains in two different media, a hopped yeast extract-peptone-dextrose (YPD) medium and a 100% barley malt wort to explore how differences in yeast strain and medium conditions influence the release of polyfunctional thiols. 3-Sulfanylhexan-1-ol was most affected by medium conditions, and its concentrations were highest in wort fermentations. The higher nitrogen content and pH of the YPD medium relative to the wort fermentations were notable differences, and significant correlations between these variables and the extent of free thiol production were observed. A strong association existed between polyfunctional thiol concentrations and the fermentation-derived, malt, and hop-derived compounds 2-phenylethanol, β-damascenone, and β-ionone. The sensory impressions of thiol character in beer were influenced by the presence of other aromatic compounds such as esters and terpene alcohols, and aroma attributes such as "tropical" were not the most suitable for describing beers brewed with yeasts that fully express homozygous IRC7^F. Sensory attributes "sweaty", "vegetal", and "overripe fruit" were more strongly associated with these strains.

Presence of Disulfide-Bonded Thiols in Malt and Hops as the Precursors of Thiols in Beer

Disulfide-bonded thiols in malt and hops were first identified as possible precursors of thiols in beer. The presence of disulfide-bonded 3-mercaptohexan-1-ol (3MH) was confirmed in malt and hops by observing an 8.9-9.9 times increase in the 3MH concentration in hopped water and unhopped wort after the reduction using tris(2-carboxyethyl)phosphine (TCEP), a reducing agent specific for disulfide bonds. The presence of disulfide-bonded 4-mercapto-4-methylpentan-2-one (4MMP) was confirmed in hops by observing 2.1 and 5.1 times increase in the 4MMP concentration after reduction in hopped water. Proteins, peptides, and amino acids having sulfhydryl groups or other thiol substances were assumed to form disulfide bonds with polyfunctional thiols in malt and hops. The release of thiols by the reduction of disulfide-bonded thiols during fermentation was first identified. A 65-82% of disulfide-bonded 3MH were reduced during fermentation, and as a result, concentrations of 3MH in hopped water and unhopped wort increased by 9.5-14.2 times during fermentation.

Development of a flavor hop (Humulus lupulus L.) cultivar, 'Furano Magical', with cones rich in 4-methyl-4-sulfunylpentan-2-one

BACKGROUND

Flavor hops (Humulus lupulus L.) are recognized as key raw materials that impart unique flavors to beer, especially in the emerging craft-beer industry. In this study the sensory evaluation of hop cone aromas using hop water extract by boiling (HWEB) was applied to develop new flavor hop cultivars in a screening from tens of varieties and breeding lines.

RESULTS

The sensory scores of HWEB showed a significant correlation with polyfunctional thiol content in hop cones, including substances such as 4-methyl-4-sulfunylpentan-2-one (4MSP) and 3-sulfunyl-4-methylpentan-1-ol (3S4MP), which are known to be difficult to analyze mechanically. As a result of the sensory evaluation of HWEB, a breeding line, 'K906901060' was found to have a strong fruity note. Subsequent chemical analyses revealed that this cultivar had 80-136 μg kg^-1 of 4MSP in its cones, which is similar to the concentration present in current leading flavor hop cultivars, such as Citra (37-114 μg kg^-1 ) and Simcoe (2-112 μg kg^-1 ). Beer late-hopped with K906901060 provoked a greater tropical flavor impression than beer hopped using Nelson Sauvin hops.

CONCLUSION

The sensory evaluation of HWEB was indicated to be useful to search for hops containing polyfunctional thiols. The plant was registered, as 'Furano K906901060 Go' in Japan, in the EU, and in the USA, and the cultivar was given the commercial name 'Furano Magical'. This cultivar was derived from a cross performed in 1989 and had been kept as a mid-mother plant from 1997, until being selected in 2014, as described here. © 2022 Society of Chemical Industry.

Malt and Hop as Sources of Thiol S-Conjugates: Thiol-Releasing Property of Lager Yeast during Fermentation

The contribution of polyfunctional thiols (PFTs) to the overall flavor of a lager beer has been well documented, but their origin remains unclear. In comparison with Saccharomyces cerevisiae strains previously investigated (same conditions: 7 days at 24 °C, 3 days at 4 °C), we examined how Saccharomyces pastorianus yeasts are able to produce these PFTs from cysteinylated (Cys-) and glutathionylated (G-) conjugates. Up to 0.35% release was observed from G-conjugates against less than 0.08% for all yeasts studied so far. Lowering the wort nitrogen level and the fermentation temperature (12 °C) strongly increased the release efficiency and the ester/alcohol ratio from Cys-conjugates. However, it did not improve the release from G-conjugates and even prevented the yeast from producing any acetate. Although poor in free PFTs and their Cys-precursors, both Saaz hop and pale malt (classical ingredients for premium lager beers) confirmed to be significant sources of G-conjugates (especially those of 3-sulfanylhexanol and 3-sulfanyl-4-methylpentanol).

Effect of "Late Harvest" of Hops (Humulus lupulus L.) on the Contents of Volatile Thiols in Furano Beauty, Furano Magical, and Cascade Varieties

In recent years, many hop varieties with unique aromas, so-called "flavor hops", have been bred and grown. Here, we investigated the effect of late-harvested hops using three flavor hop varieties; Furano Beauty, Furano Magical, and Cascade. The sample hops were harvested at different days after flowering (DAF): DAF 45 (normal harvest), DAF 65, DAF 75, and DAF 85. We measured the volatile thiols in sample cones. The results indicated that 4-methyl-4-sulfanylpentane-2-one contents showed almost no change or a slightly decrease with a delay in harvest, whereas 3-sulfanyl-4-methylpentan-1-ol (3S4MP) content in late-harvested samples increased several fold in comparison with normal-harvested samples. Additionally, 3S4MP contents in the beers brewed with DAF 65 samples were several times higher than those using DAF 45 ones. From these results, we propose a new method to control 3S4MP content in hop cones by changing its harvest date.

Modulation of the Sulfanylalkyl Acetate/Alcohol Ratio and Free Thiol Release from Cysteinylated and/or Glutathionylated Sulfanylalkyl Alcohols in Beer under Different Fermentation Conditions

The occurrence of a substantial pool of cysteinylated and glutathionylated forms of polyfunctional thiols has been evidenced for several dual-purpose hop varieties, and so is the ability of Saccharomyces cerevisiae yeast to release free thiols from these forms through fermentation. The present work aimed to investigate the effect of temperature, wort density, maturation time, and strain on the efficiency of free thiol release by S. cerevisiae yeasts. Model media at 12, 15, or 17°P were spiked with three cysteinylated (Cys-) or three glutathionylated (G-) sulfanylalkyl alcohols (Cys- or G-3-sulfanylpentan-1-ol, 3-sulfanyl-4-methylpentan-1-ol, and 3-sulfanylhexan-1-ol), fermented for 7 days at 18, 24, and 28 °C, and kept at 4 °C for varying number of days. The released sulfanylalkyl alcohols and their corresponding acetates were extracted with a Ag-ion SPE cartridge and analyzed by gas chromatography-pulsed-flame photometric detection. The wort density and yeast strain greatly affected the acetate/alcohol ratio. This ratio varied from 1 to 80% according to the yeast strain and was at its highest at 17°P and 24 °C. Maturation appeared as the crucial step for free thiol excretion from yeast cells (no thiol was recovered in the fermented worts without maturation). Among the five yeasts tested, the yeast strain SafAle K-97 released the highest level of sulfanylalkyl alcohols into the medium (up to 0.45% of the added cysteinylated adducts and 0.08% of the glutathionylated adducts), whereas S-33 or S-04 should be preferred when release of esters is sought out (release efficiencies up to 0.35% from cysteinylated adducts and 0.02% from glutathionylated adducts are observed if both the alcohol and its acetate are considered).

Occurrence of Ehrlich-Derived and Varietal Polyfunctional Thiols in Belgian White Wines Made from Chardonnay and Solaris Grapes

Although almost disappeared at the end of the 20th century, Belgian wine production reached a million liters in 2017. The aim of the present work was to identify aroma markers for two white cultivars widespread in Belgium: Chardonnay (the most commercially grown cultivar worldwide) and Solaris (an interspecific fungus-resistant variety). Specific p-hydroxymercuribenzoic acid extraction followed by gas chromatography with a pulsed flame photometric detector was applied to single-varietal wine samples from 2015 to 2018 harvests. Among the Ehrlich-derived thiols, all found below their sensory thresholds, 3-sulfanylpropyl acetate usually outranged 3-sulfanylpropan-1-ol, while 2-sulfanylethan-1-ol concentrations always exceeded 2-sulfanylethyl acetate levels. The data confirm the occurrence, in both Chardonnay and Solaris wines, of 3-sulfanylhexan-1-ol and phenylmethanethiol (grapefruit and gunflint aroma, respectively), at concentrations far above their thresholds. This work also revealed, for the first time, the presence of 3-sulfanylheptan-1-ol, the branched alcohols 2-methyl-3-sulfanyl propan-1-ol, 2-methyl-3-sulfanylbutan-1-ol, and 3-sulfanyl-3-methylbutan-1-ol, and the carbonyls 3-sulfanylbutan-2-one (not in sparkling wines) and 3-sulfanylpentanal.

Spotlight on release mechanisms of volatile thiols in beverages

Volatile thiols are very strong-smelling molecules that can impact the aroma of numerous beverages. Several thiols and thiol precursors have been reported previously in different plants used as raw material for beverages, some of which are fermented. We focused on thiols in beverages and their release mechanisms from precursors during processing. Volatile thiols in beverages can be classified aslow molecular weight volatile thiols (e.g. H₂S, methanethiol) which impact the smell negatively, and volatile thiols with higher boiling points that contribute positively to the aroma profile. The first part of this review is devoted to volatile thiols, without considering small malodorous molecules. The second part deals with thiol precursors and the different release mechanisms induced by processing (e.g. extraction, roasting or fermentation) and by the growing methods (e.g. viticulture), which can impact on amounts of thiols and their precursors.

Impact of Copper Fungicide Use in Hop Production on the Total Metal Content and Stability of Wort and Dry-Hopped Beer

Transition metals, including copper, iron, and manganese, are known to catalyze the generation of reactive oxygen species (ROS) in beer leading to reduced product stability. Metals in beer are generally derived from raw ingredients. The present study aims to evaluate the impact of brewing and dry-hopping using hops treated with copper-based fungicides (CBFs) on the final transition metal content of model buffer solutions and pilot-scale systems of wort and beer. Copper levels in model wort and beer solutions were elevated (105.6% and 230.4% increase, respectively) when CBF-treated hops were used. In laboratory-prepared wort, elevated copper concentrations were not observed when CBF-treated hops were used for boiling. Dry hopping of beer using CBF-treated hops led to significant increases in total copper content (ca. 75 µg/kg vs. ca. 40–50 µg/kg in the control-hopped beer) when yeast was absent from the treated beer, but not when yeast was present. It was observed that manganese levels were significantly elevated in all hopped beers (ca. 495–550 µg/kg vs. 90–125 µg/kg in the unhopped control), regardless of hop treatment. A hop varietal thiol, 4-Mercapto-4-methylpentan-2-one, was spiked into treated beers, and the rate of oxidative loss was monitored during aging. Rates of thiol loss in treated beer samples did not differ across CBF treatments but were significantly lower in unhopped controls in the absence of yeast (p < 0.0001) and correlated significantly with total manganese content of the beers (R2 = 0.4228, p = 0.0006). The rate of staling in hopped beers as measured by the rate of 1-hydroxyethyl radical generation did not differ among hop treatments, suggesting that excess copper content contributed from the hops does not negatively impact the oxidative stability of the beers. These findings suggest that brewers can use CBF-treated hops without any negative implications for the shelf stability of their beers and do not contraindicate the use of CBF in hops production when necessary.

Why Craft Brewers Should Be Advised to Use Bottle Refermentation to Improve Late-Hopped Beer Stability

The aromatic complexity of craft beers, together with some particular practices (use of small vessels, dry hopping, etc.), can cause more oxidation associated with pre-maturated colloidal instability, Madeira off-flavors, bitterness decrease, and aroma loss. As bottle refermentation is widely used in Belgian craft beers, the aim of the present work is to assess how this practice might impact their flavor. In fresh beers, key flavors were evidenced by four complementary techniques: short-chain fatty acids determination, esters analysis, XAD-2 extract olfactometry, and overall sensory analysis. In almost all of the fresh beers, isovaleric acid was the sole fatty acid found above its sensory threshold. Selected samples were further analyzed through natural aging at 20 °C. The presence of yeast in the bottle minimized the trans-2-nonenal released from Schiff bases and proved less deleterious than suggested by previous studies with regard to fatty acid release and ester decrease through aging. Furthermore, according to the yeast species selected, some interesting terpenols and phenols were produced from glucosides during storage.

The molecular biology of fruity and floral aromas in beer and other alcoholic beverages

Aroma compounds provide attractiveness and variety to alcoholic beverages. We discuss the molecular biology of a major subset of beer aroma volatiles, fruity and floral compounds, originating from raw materials (malt and hops), or formed by yeast during fermentation. We introduce aroma perception, describe the most aroma-active, fruity and floral compounds in fruits and their presence and origin in beer. They are classified into categories based on their functional groups and biosynthesis pathways: (1) higher alcohols and esters, (2) polyfunctional thiols, (3) lactones and furanones, and (4) terpenoids. Yeast and hops are the main sources of fruity and flowery aroma compounds in beer. For yeast, the focus is on higher alcohols and esters, and particularly the complex regulation of the alcohol acetyl transferase ATF1 gene. We discuss the release of polyfunctional thiols and monoterpenoids from cysteine- and glutathione-S-conjugated compounds and glucosides, respectively, the primary biological functions of the yeast enzymes involved, their mode of action and mechanisms of regulation that control aroma compound production. Furthermore, we discuss biochemistry and genetics of terpenoid production and formation of non-volatile precursors in Humulus lupulus (hops). Insight in these pathways provides a toolbox for creating innovative products with a diversity of pleasant aromas.

First Evidence of the Cysteine and Glutathione Conjugates of 3-Sulfanylpentan-1-ol in Hop ( Humulus lupulus L.)

After evidence of the cysteinylated precursors of 3-sulfanyl-4-methylpentan-1-ol (Cys-26) and 3-sulfanylhexan-1-ol (Cys-23) in hop, S-glutathione precursors (G-23 and G-26) were recently discovered in different dual-purpose hop varieties. Because free 3-sulfanylpentan-1-ol (21) has also been detected in hop, the present work aimed to identify its potential precursors. The compounds S-3-(1-hydroxylpentyl)cysteine (Cys-21) and S-3-(1-hydroxylpentyl)glutathione (G-21) were first synthesized and characterized by nuclear magnetic resonance and high-resolution mass spectrometry. High-performance liquid chromatography-positive electrospray ionization-tandem mass spectrometry evidenced both for the first time in hop. Both S conjugates were further quantitated in six hop samples: the well-known Saaz, Amarillo, Citra, Hallertau Blanc, Nelson Sauvin, and Polaris. Similar to G-23, G-21 appeared ubiquitous to all varieties. Of all of the samples investigated here, Citra (harvest 2017) emerged as the richest in G-21, with 18 mg/kg of dry matter. Cys-21 was found in all samples at a much lower concentration (up to 0.2 mg/kg of dry matter in Polaris, harvest 2017). Model media spiked with Cys-21 or G-21 allowed for the confirmation that brewing yeast is able to release free compound 21 from them.

Hop Compounds: Extraction Techniques, Chemical Analyses, Antioxidative, Antimicrobial, and Anticarcinogenic Effects

Hop plants comprise a variety of natural compounds greatly differing in their structure and properties. A wide range of methods have been developed for their isolation and chemical analysis, as well as for determining their antioxidative, antimicrobial, and antigenotoxic potentials. This contribution provides an overview of extraction and fractionation techniques of the most important hop compounds known for their health-promoting features. Although hops remain the principal ingredient for providing the taste, stability, and antimicrobial protection of beer, they have found applications in the pharmaceutical and other food industries as well. This review focuses on numerous health-promoting effects of hops raging from antioxidative, sedative, and anti-inflammatory potentials, over anticarcinogenic features to estrogenic activity. Therefore, hops should be exploited for the prevention and even healing of several prevalent diseases like cardiovascular disorders and various cancer types. New ideas for future studies on hops are finally presented: computational investigations of chemical reactivities of hop compounds, nanoencapsulation, and synergistic effects leading to a higher bioavailability of biologically active substances as well as the application of waste hop biomass from breweries for the production of high-added-value products in accordance with the biorefinery concept.

Modeling of α-acids and xanthohumol extraction in dry-hopped beers

The practice of dry-hopping has been used by the brewing industry to obtain beers with increased contents of flavor and bitterness compounds. Notwithstanding this, other compounds such as α-acids (AA) and xhanthohumol (XN) are co-extracted influencing the final characteristics of the beer, particularly its beneficial bioactivity. In this context a model for the understanding of AA and XN extraction by dry-hopping is proposed. The varieties Chinook (CHI), East Kent Goldings (EKG) and Tettnanger (TET) were assayed and robust statistical approaches were applied for data interpretation. Concentration of AA in beers post-maturation reached values higher than 20 mg/L using 2.8 g/L of CHI hops and 10 days of maturation. For XN, a similar behavior was verified. The maximum efficiency of AA and XN extraction (transfer rate) were reached at 13.5 days with dose rates of 147 and 13.9 mg/L, respectively.

The role of metals in mammalian olfaction of low molecular weight organosulfur compounds

Covering: up to the end of 2017While suggestions concerning the possible role of metals in olfaction and taste date back 50 years, only recently has it been possible to confirm these proposals with experiments involving individual olfactory receptors (ORs). A detailed discussion of recent experimental results demonstrating the key role of metals in enhancing the response of human and other vertebrate ORs to specific odorants is presented against the backdrop of our knowledge of how the sense of smell functions both at the molecular and whole animal levels. This review emphasizes the role of metals in the detection of low molecular weight thiols, sulfides, and other organosulfur compounds, including those found in strong-smelling animal excretions and plant volatiles, and those used in gas odorization. Alternative theories of olfaction are described, with evidence favoring the modified "shape" theory. The use of quantum mechanical/molecular modeling (QM/MM), site-directed mutagenesis and saturation-transfer-difference (STD) NMR is discussed, providing support for biological studies of mouse and human receptors, MOR244-3 and OR OR2T11, respectively. Copper is bound at the active site of MOR244-3 by cysteine and histidine, while cysteine, histidine and methionine are involved with OR2T11. The binding pockets of these two receptors are found in different locations in the three-dimensional seven transmembrane models. Another recently deorphaned human olfactory receptor, OR2M3, highly selective for a thiol from onions, and a broadly-tuned thiol receptor, OR1A1, are also discussed. Other topics covered include the effects of nanoparticles and heavy metal toxicants on vertebrate and fish ORs, intranasal zinc products and the loss of smell (anosmia).