Spatial-Temporal Characteristics of Confined Polymer Motion Determine Proton Conduction of Polyoxometalate-Poly(ethylene glycol) Hybrid Nanocomposites

Synthesis of {AlMo14O44}-Based Supramolecular Structures with High Proton Conductivity

Polyoxometalates (POMs) are esteemed for their remarkable stability and exceptionally high proton conductivity, rendering them ripe for extensive exploration owing to their research significance. Herein, we synthesized two bimolybdenum-capped {AlMoVI8MoV6O44} cluster-based coordination polymers through a solvothermal method. Single-crystal X-ray diffraction analysis elucidates that H[(H2bimb)3(AlMoVI8MoV6O44)] [bimb = 1,4-bis(imidazole-1-ylmethyl)benzene, compound 1] is the POMs-organic supramolecular structure. The introduction of zinc ions into the reaction environment facilitated the connection of initially dispersed ligands, which yielded the well-ordered structure H3[Zn2(bimb)4(AlMoVI8MoV6O44)]·4H2O (compound 2) with a layer distance of 11.8 Å. The proton conductivities (σ) of two compounds were measured under conditions of 85 °C and 98% relative humidity (RH), resulting in values of 3.89 × 10-2 and 4.76 × 10-2 S·cm-1, respectively. This study presents a novel approach to fabricating POMs as proton conductors through structural design and manufacturing adjustments.

Backscattering silicon spectrometer (BASIS): sixteen years in advanced materials characterization

Quasielastic neutron scattering (QENS) is an experimental technique that can measure parameters of mobility, such as diffusion jump rate and jump length, as well as localized relaxations of chemical species (molecules, ions, and segments) at atomic and nanometer length scales. Due to the high penetrative power of neutrons and their sensitivity to neutron scattering cross-section of chemical species, QENS can effectively probe mobility inside most bulk materials. This review focuses on QENS experiments performed using a neutron backscattering silicon spectrometer (BASIS) to explore the dynamics in various materials and understand their structure-property relationship. BASIS is a time-of-flight near-backscattering inverted geometry spectrometer with very high energy resolution (approximately 0.0035 meV of full width at half maximum), allowing measurements of dynamics on nano to picosecond timescales. The science areas studied with BASIS are diverse, with a focus on soft matter topics, including traditional biological and polymer science experiments, as well as measurements of fluids ranging from simple hydrocarbons and aqueous solutions to relatively complex room-temperature ionic liquids and deep-eutectic solvents, either in the bulk state or confined. Additionally, hydrogen confined in various materials is routinely measured on BASIS. Other topics successfully investigated at BASIS include quantum fluids, spin glasses, and magnetism. BASIS has been in the user program since 2007 at the Spallation Neutron Source of the Oak Ridge National Laboratory, an Office of Science User Facility supported by the U.S. Department of Energy. Over the past sixteen years, BASIS has contributed to various scientific disciplines, exploring the structure and dynamics of many chemical species and their fabrication for practical applications. A comprehensive review of BASIS contributions and capabilities would be an asset to the materials science community, providing insights into employing the neutron backscattering technique for advanced materials characterization.

Tuning Proton Conduction by Staggered Arrays of Polar Preyssler-Type Oxoclusters

Polyoxometalates (POMs), anionic nanosized oxoclusters that can be considered as fragments of metal oxides, have been extensively studied for their diverse composition and structure, showing promise in various fields such as catalysis and electronics. Proton conduction, relevant to catalysis and electronics, has attracted interest in materials chemistry, and POM anions are advantageous in terms of their proton carrier density and mobility. Recently, polar POMs have attracted attention for their unique ferroelectric behaviors, yet they have been little studied with regard to proton conduction, as their polarity has generally been believed to have a negative impact. Here, we propose that polar POMs can be used to align polar proton carriers, such as H2O and polymers, to construct efficient proton-conducting pathways. In this study, we present ionic crystals composed of polar Preyssler-type POMs ([Xn+(H2O)P5W30O110](15-n)-, Xn+ = Ca2+, Eu3+) and K+ exhibiting ultrahigh proton conductivity surpassing 10-2 S cm-1, which is required for practical applications. In contrast, ionic crystals with nonpolar Preyssler-type POMs show an order of magnitude lower proton conductivity. Structural and spectroscopic studies combined with theoretical calculations reveal that proton carriers align with the aid of staggered arrays of polar POMs, forming a hydrogen-bonding network favorable for proton conduction. This study integrates molecular chemistry by the design of POMs and solid-state chemistry by exploring long-range proton conduction mechanisms, offering novel insights for future materials design.

The Hybridization of Polymers with Metal Oxide Clusters for the Design of Non-Fluorinated Proton Exchange Membranes

As the key component of various energy storage and conversion devices, proton exchange membranes (PEMs) have been attracting significant interest. However, their further development is limited by the high cost of perfluorosulfonic acid polymers and the poor stability of acid-dopped non-fluorinated polymers. Recently, a new group of PEMs has been developed by hybridizing polyoxometalates (POMs), a group of super acidic sub-nanoscale metal oxide clusters, with polymers. POMs can serve simultaneously as both proton sponges and stabilizing agents, and their complexation with polymers can further improve polymers' mechanical performance and processability. Enormous efforts have been focused on studying supramolecular complexation or covalent grafting of POMs with various polymers to optimize PEMs in terms of cost, mechanical properties and stabilities. This concept summarizes recent advances in this emerging field and outlines the design strategies and application perspectives employed for using POM-polymer hybrid materials as PEMs.

The coupling of rotational and translational dynamics for rapid diffusion of nanorods in macromolecular networks

The rod-like viruses show anomalously rapid diffusion in bio-tissue networks originated from the rotation-facilitated transportation; however, the experimental investigation of the correlation of the rotational and translational dynamics is still in blank. Herein, typical rod-like and spherical gold nanoparticles (NPs) are dispersed in the classical Tetra-PEG gels, respectively, as model systems for light scattering studies. The contributions from translational and rotational diffusive dynamics, and network fluctuation dynamics can be well-resolved and the stretch exponent of rotational dynamics at 0.25 is proven to be the fingerprint for the coupled rotational and translational dynamics of nanorods. The rotation facilitated re-orientation finally leads to the fast transportation of nanorods. The discoveries are confirmed to be valid for rod-like biomacromolecule systems by studying the diffusive dynamics of Tobacco mosaic virus in gels. The work can be inspiring for the development of protocols to prevent infection of microorganism and regulate the transportation of nano-medicines.

Polyoxometalate-based reticular materials for proton conduction: from rigid frameworks to flexible networks

Proton conductors play a crucial role in energy and electronic technologies, thus attracting extensive research interest. Recently, reticular chemistry has propelled the development of reticular materials with framework or network structures, which can offer tunable proton transport pathways to achieve optimal conducting performance. Polyoxometalates (POMs), as a class of highly proton-conducting units, have been integrated into these reticular materials using various linkers. This leads to the creation of hybrid proton conductors with structures varying from rigid crystalline frameworks to flexible networks, showing adjustable proton transport behaviors and mechanical properties. This Frontier article highlights the advancements in POM-based reticular materials for proton conduction and provides insights for designing advanced proton conductors for practical applications.

Spatiotemporal Studies of Soluble Inorganic Nanostructures with X-rays and Neutrons

This Review addresses the use of X-ray and neutron scattering as well as X-ray absorption to describe how inorganic nanostructured materials assemble, evolve, and function in solution. We first provide an overview of techniques and instrumentation (both large user facilities and benchtop). We review recent studies of soluble inorganic nanostructure assembly, covering the disciplines of materials synthesis, processes in nature, nuclear materials, and the widely applicable fundamental processes of hydrophobic interactions and ion pairing. Reviewed studies cover size regimes and length scales ranging from sub-Ångström (coordination chemistry and ion pairing) to several nanometers (molecular clusters, i.e. polyoxometalates, polyoxocations, and metal-organic polyhedra), to the mesoscale (supramolecular assembly processes). Reviewed studies predominantly exploit 1) SAXS/WAXS/SANS (small- and wide-angle X-ray or neutron scattering), 2) PDF (pair-distribution function analysis of X-ray total scattering), and 3) XANES and EXAFS (X-ray absorption near-edge structure and extended X-ray absorption fine structure, respectively). While the scattering techniques provide structural information, X-ray absorption yields the oxidation state in addition to the local coordination. Our goal for this Review is to provide information and inspiration for the inorganic/materials science communities that may benefit from elucidating the role of solution speciation in natural and synthetic processes.

Apparent symmetry rising induced by crystallization inhibition in ternary co-crystallization-driven self-assembly

The concept of apparent symmetry rising, opposite to symmetry breaking, was proposed to illustrate the unusual phenomenon that the symmetry of the apparent morphology of the multiply twinned particle is higher than that of its crystal structure. We developed a unique strategy of co-crystallization-driven self-assembly of amphiphilic block copolymers PEO-b-PS and the inorganic cluster silicotungstic acid to achieve apparent symmetry rising of nanoparticles under mild conditions. The triangular nanoplates triply twinned by orthogonal crystals (low symmetry) have an additional triple symmetry (high symmetry). The appropriate crystallization inhibition of short solvophilic segments of the block copolymers favors the oriented attachment of homogeneous domains of hybrid nanoribbons, and consequently forms kinetic-controlled triangular nanoplates with twin grain boundaries.

Functional Molecular Granular Materials: Advances and Perspectives

Molecular granular materials (MGMs) are constructed with sub-nanoscale molecular clusters (MCs) as the building units and they have recently been observed to possess enriched functionalities distinct from granular materials of colloid nanoparticles. Herein, the birth and recent research advances in MGMs are summarized with the topics covering the precise synthesis of MC assemblies with target topologies, the hierarchical relaxation dynamics and tuneable viscoelasticity, impact-resistant capacity, and proton conductivity performance. The extremely small size of MC renders them two features: bulk diffusive dynamics with energy scale close to thermal fluctuation energy and the dominant volume fraction of surface structures. This finally leads to the hierarchical relaxation dynamics and broadly tuneable viscoelasticity of MGMs although the structural units are with small sizes and low M_w . Therefore, MGMs have been applied as impact resistant materials and proton conductors for the highly tuneable relaxation dynamics.

The Counterion-Mediated Controllable Coacervation of Nano-Ions with Polyelectrolytes

Nano-ions can complex with polyelectrolytes for coacervates with hierarchical structures; however, the rational design of functional coacervations is still rare due to the poor understanding of their structure-property relationship from their complex interaction. Herein, 1 nm anionic metal oxide clusters, PW₁₂O₄₀^3-, with well-defined, mono-disperse structures are applied to complex with cationic polyelectrolyte and the system shows tunable coacervation via the alternation of counterions (H⁺ and Na⁺) of PW₁₂O₄₀^3-. Suggested from Fourier transform infrared spectroscopy (FT-IR) and isothermal titration studies, the interaction between PW₁₂O₄₀^3- and cationic polyelectrolytes can be modulated by the bridging effect of counterions via hydrogen bonding or ion-dipole interaction to carbonyl groups of polyelectrolytes. The condensed structures of the complexed coacervates are explored by small angle X-ray and neutron scattering techniques, respectively. The coacervate with H⁺ as counterions shows both crystallized and discrete PW₁₂O₄₀^3- clusters, with a loose polymer-cluster network in comparison to the system of Na⁺ which shows a dense packing structure with aggregated nano-ions filling the meshes of polyelectrolyte networks. The bridging effect of counterions helps understand the super-chaotropic effect observed in nano-ion system and provides avenues for the design of metal oxide cluster-based functional coacervates.

Decoupling Segmental Dynamics and Ionic Transport for Superionic Anhydrous Proton Conductors of Polyoxometalate-poly(ethylene glycol) Nanocomposites

Superionic anhydrous proton conductors can be obtained from the complexation of nanoscale polyoxometalates (POMs) and poly(ethylene glycol) (PEG) in the "polymer in salt" regime. The reduced energy barrier of H⁺ hopping is facilitated from the increased H⁺ concentration and shortened inter-POM distances. POMs with identical structure/size (≈1 nm) but different charge densities are complexed with PEG, respectively, with concentrations ranging from 10 to 60 % wt. Increasing trends of viscosities can be observed with the rising charge densities of POMs due to the increasing confinement strength on PEG substrate from POMs. Fractional Walden rule is further applied to analyze the viscosity and proton conductivity correlations, and microscopic mechanisms of proton conduction for PEG-POM nanocomposites are revealed: 1) ion transport is highly associated with polymer chain dynamic for POMs concentrations ranging from 10 to 30 % wt.; 2) ionic conduction is largely decoupled from chain dynamic of polymer matrix for concentrations ranging from 40 to 60 % wt. with Walden plots shifted to the superionic regime. The decoupling of proton transport from polymer segment dynamics allows the simultaneous enhancements of the nanocomposites' mechanical properties and proton conductions, providing guidelines for the rational design of anhydrous proton conductors with integrated functionalities.

MOF/POM hybrids as catalysts for organic transformations

Insertion of molecular metal oxides, e.g. polyoxometalates (POMs), into metal-organic frameworks (MOFs) opens up new research opportunities in various fields, particularly in catalysis. POM/MOF composites have strong acidity, oxygen-rich surface, and redox capacity due to typical characteristics of POMs and the large surface area, highly organized structures, tunable pore size, and shape are due to MOFs. Such hybrid materials have gained a lot of attention due to astonishing structural features, and hence have potential applications in organic catalysis, sorption and separation, proton conduction, magnetism, lithium-ion batteries, supercapacitors, electrochemistry, medicine, bio-fuel, and so on. The exceptional chemical and physical characteristics of POMOFs make them useful as catalysts in simple organic transformations with high capacity and selectivity. Here, the thorough catalytic study starts with a brief introduction related to POMs and MOFs, and is followed by the synthetic strategies and applications of these materials in several catalytic organic transformations. Furthermore, catalytic conversions like oxidation, condensation, esterification, and some other types of catalytic reactions including photocatalytic reactions are discussed in length with their plausible catalytic mechanisms. The disadvantages of the POMOFs and difficulties faced in the field have also been explored briefly from our perspectives.

Efficient Oxygen Evolution Reaction on Polyethylene Glycol-Modified BiVO4 Photoanode by Speeding up Proton Transfer

The rate-determining step of the oxygen evolution reaction based on a semiconductor photoanode is the formation of the OO bond. Herein, polyethylene glycol (PEG)-modified BiVO₄ photoanodes are reported, in which protons can be transferred quickly due to the high proton conductivity of PEG, resulting in the acceleration of the OO bond formation rate. These are fully demonstrated by different kinetic isotope effect values. Moreover, the open-circuit voltage (U_oc ) further illustrates that PEG passivates the surface states and surface charge recombination is reduced. The composite photoanode can achieve a maximum photocurrent density of 3.64 mA cm^-2 at 1.23 V compared to 1.04 mA cm^-2 for pure BiVO₄ , and an onset potential of 170 mV, which is a 230 mV negative shift compared to pure BiVO₄ . This work provides a new strategy to accelerate water oxidation kinetics for photoanodes by speeding up the transfer of the proton and the OO bond formation rate.

Integrating molecular design and crystal engineering approaches in non-humidified intermediate-temperature proton conductors based on a Dawson-type polyoxometalate and poly(ethylene glycol) derivatives

Anionic metal-oxygen clusters known as polyoxometalates (POMs) have been widely researched as components of proton conductors. While proton conduction under non-humidified intermediate-temperature (100-250 °C) conditions is advantageous from the viewpoint of kinetics, few solid-state materials, not to mention POM-based crystals, show truly effective proton conduction without the aid of water vapor. In this context, non-volatile proton-conductive polymers have been confined into POM-based frameworks, while fast proton conduction was infeasible. Herein, we demonstrate a new strategy to synthesize POM-polymer composites exhibiting fast proton conduction under non-humidified intermediate-temperature conditions. Specifically, a molecular design approach utilizing poly(ethylene glycol)s (PEGs) of different terminal groups or chain lengths controls the proton carrier density, and a crystal engineering approach using a large Dawson-type POM ([α-P₂W₁₈O₆₂]^6-) with an anisotropic molecular shape and alkali metal ions as counter cations fine-tunes the mobility of the confined PEGs as proton carriers. By integrating these approaches, proton conductivity over 10^-4 S cm^-1 at 150 °C, comparable to the well-known highly proton-conductive solid-state materials, is achieved. The proton conduction mechanism is discussed with alternative current impedance spectroscopy jointly with specific heat capacity measurements and solid-state NMR spectroscopy.

Ultrahigh Proton Conduction via Extended Hydrogen-Bonding Network in a Preyssler-Type Polyoxometalate-Based Framework Functionalized with a Lanthanide Ion

The exploration of composition-structure-function relationship in proton-conducting solids remains a challenge in materials chemistry. Polyoxometalate-based compounds have been long considered as candidates for proton conductors; however, their low structural stability and a large decrease in conductivity under reduced relative humidity (RH) have limited their applications. To overcome such limitations, the hybridization of polyoxometalates with proton-conducting polymers has emerged as a promising method. Besides, 4f lanthanide ions possess a high coordination number, which can be utilized to attract water molecules and to build robust frameworks. Herein, a Preyssler-type polyoxometalate functionalized with a 9-coordinate Eu³⁺ (Eu[P₅W₃₀O₁₁₀K]^11-) is newly synthesized and combined with poly(allylamine) with amine moieties as protonation sites. The resulting robust crystalline composite exhibits an ultrahigh proton conductivity >10^-2 S cm^-1 at 368 K and 90% RH, which is still >10^-3 S cm^-1 at 50% RH, due to the strengthened and extended hydrogen-bonding network.

A High-Capacity Negative Electrode for Asymmetric Supercapacitors Based on a PMo12 Coordination Polymer with Novel Water-Assisted Proton Channels

The development of a negative electrode for supercapacitors is a critical challenge for the next-generation of energy-storage devices. Herein, two new electrodes formed by the coordination polymers [Ni(itmb)₄ (HPMo₁₂ O₄₀ )]·2H₂ O (1) and [Zn(itmb)₃ (H₂ O)(HPMo₁₂ O₄₀ )]·4H₂ O (2) (itmb = 1-(imidazo-1-ly)-4-(1,2,4-triazol-1-ylmethyl)benzene), synthesized by a simple hydrothermal method, are described. Compounds 1 and 2 show high capacitances of 477.9 and 890.2 F g^-1 , respectively. An asymmetric supercapacitor device assembled using 2 which has novel water-assisted proton channels as negative electrode and active carbon as positive electrode shows ultrahigh energy density and power density of 23.4 W h kg^-1 and 3864.4 W kg^-1 , respectively. Moreover, the ability to feed a red light emitting diode (LED) also demonstrates the feasibility for practical use. The results allow a better elucidation of the storage mechanism in polyoxometalate-based coordination polymers and provide a promising direction for exploring novel negative materials for new-generation high-performance supercapacitors.

Polyoxometalate-Polymer Hybrid Materials as Proton Exchange Membranes for Fuel Cell Applications

As one of the most efficient pathways to provide clean energy, fuel cells have attracted great attention in both academic and industrial communities. Proton exchange membranes (PEMs) or proton-conducting electrolytes are the key components in fuel cell devices, which require the characteristics of high proton conductivity as well as high mechanical, chemical and thermal stabilities. Organic-inorganic hybrid PEMs can provide a fantastic platform to combine both advantages of two components to meet these demands. Due to their extremely high proton conductivity, good thermal stability and chemical adjustability, polyoxometalates (POMs) are regarded as promising building blocks for hybrid PEMs. In this review, we summarize a number of research works on the progress of POM-polymer hybrid materials and related applications in PEMs. Firstly, a brief background of POMs and their proton-conducting properties are introduced; then, the hybridization strategies of POMs with polymer moieties are discussed from the aspects of both noncovalent and covalent concepts; and finally, we focus on the performance of these hybrid materials in PEMs, especially the advances in the last five years. This review will provide a better understanding of the challenges and perspectives of POM-polymer hybrid PEMs for future fuel cell applications.

Poly(ethylene glycol) nanocomposites of sub-nanometer metal oxide clusters for dynamic semi-solid proton conductive electrolytes

PEG–POM nanocomposites are ideal candidates for semi-solid proton conductors with high proton conductivities and devisable mechanical performances.

Sub-nm-scale metal oxide clusters (PW₁₂O₄₀^3–) show high solubility in the melt of poly(ethylene glycol) (PEG) and the obtained semi-solid nanocomposites show promising proton conductivities under ambient conditions. Suggested from scattering studies, the clusters are homogeneously dispersed in the PEG melt at the molecular scale with high loading amounts (70 wt%) and the formed real solutions can be stable for months with no aggregation or phase separation. The conductivities of the nanocomposites which are governed by the concentrations of H₃PW₁₂O₄₀ can reach as high as 1.01 × 10^–2 S cm^–1 at the highest concentration. Due to the dynamic cross-linking hydrogen bonding between clusters and PEG, the nanocomposites behave like solids with negligible flow at high concentrations of clusters. Upon the application of high-speed shear forces (>32 s^–1), the composites can flow with continuously decreasing viscosities. The shear thinning properties of the nanocomposites enable their convenient processing into required morphologies and the wettability of electrolytes to electrodes under typical high shear rate processing conditions and the safety of the produced devices can be ensured by their solid-like properties in the static state.