Surface Sensitive Photoluminescence of Carbon Nanodots: Coupling between the Carbonyl Group and π-Electron System

The reversible piezochromic luminescence behavior of carbon dots under a cycle of loading/unloading pressure

Carbon dots (CDs) have gained intensive interest owing to their small size, unique structure, excellent photoluminescence (PL) properties and broad applications. In particular, pressure-triggered irreversible piezochromic behavior of fluorescent CDs was previously reported and attributed to the sp2-sp3 transition in the carbon core or aggregation-induced emission under high pressure. Here, we report the reversible piezochromic behavior of microwave-heating synthesized CDs (named M-CDs) using ethylenediamine and aspartic acid as precursors. Under a loading/unloading cycle, the PL intensity of M-CDs decreased continuously with the pressure increasing from 101 kPa up to 20 GPa, and the maximum emission of M-CDs at 101 kPa (λmax = 550 nm) was slightly blue-shifted to 541 nm at 20 GPa, but when the pressure was released from 20 GPa to normal environmental conditions, both the emission wavelength and the PL intensity of M-CDs returned to their initial states at 101 kPa. The control sample was also synthesized using the same precursors but through a hydrothermal method and thus named H-CDs. Both H-CDs and M-CDs have similar particle sizes, morphology and excitation-dependent PL behavior under 101 kPa; however, H-CDs showed a typical piezochromic behavior with the emission blue-shifted from 518 to 491 nm when the pressure was increased from 101 kPa to 0.97 GPa, and then red-shifted from 491 to 530 nm when the pressure was increased up to 10.53 GPa. This irreversible behavior of H-CDs was accompanied by a 2-fold enhancement of their PL intensity after releasing the pressure. The remarkable different behaviors of M-CDs and H-CDs under a loading/unloading cycle are caused by different interior structures of M-CDs and H-CDs due to different synthetic processes, which is worthy of further research.

The Enhanced Photoluminescence Properties of Carbon Dots Derived from Glucose: The Effect of Natural Oxidation

The investigation of the fluorescence mechanism of carbon dots (CDs) has attracted significant attention, particularly the role of the oxygen-containing groups. Dual-CDs exhibiting blue and green emissions are synthesized from glucose via a simple ultrasonic treatment, and the oxidation degree of the CDs is softly modified through a slow natural oxidation approach, which is in stark contrast to that aggressively altering CDs' surface configurations through chemical oxidation methods. It is interesting to find that the intensity of the blue fluorescence gradually increases, eventually becoming the dominant emission after prolonging the oxidation periods, with the quantum yield (QY) of the CDs being enhanced from ~0.61% to ~4.26%. Combining the microstructure characterizations, optical measurements, and ultrafiltration experiments, we hypothesize that the blue emission could be ascribed to the surface states induced by the C-O and C=O groups, while the green luminescence may originate from the deep energy levels associated with the O-C=O groups. The distinct emission states and energy distributions could result in the blue and the green luminescence exhibiting distinct excitation and emission behaviors. Our findings could provide new insights into the fluorescence mechanism of CDs.

Carbon Dots and Their Polymeric Nanocomposites: Insight into Their Synthesis, Photoluminescence Mechanisms, and Recent Trends in Sensing Applications

Carbon dots (CDs), a novel class of carbon-based nanoparticles, have received a lot of interest recently due to their exceptional mechanical, chemical, and fluorescent properties, as well as their excellent photostability and biocompatibility. CDs' emission properties have already found a variety of potential applications, in which bioimaging and sensing are major highlights. It is widely acknowledged that CDs' fluorescence and surface conditions are closely linked. However, due to the structural complexity of CDs, the specific underlying process of their fluorescence is uncertain and yet to be explained. Because of their low toxicity, robust and wide optical absorption, high chemical stability, rapid transfer characteristics, and ease of modification, CDs have been recognized as promising carbon nanomaterials for a variety of sensing applications. Thus, following such outstanding properties of CDs, they have been mixed and imprinted onto different polymeric components to achieve a highly efficient nanocomposite with improved functional groups and properties. Here, in this review, various approaches and techniques for the preparation of polymer/CDs nanocomposites have been elaborated along with the individual characteristics of CDs. CDs/polymer nanocomposites recently have been highly demanded for sensor applications. The insights from this review are detailed sensor applications of polymer/CDs nanocomposites especially for detection of different chemical and biological analytes such as metal ions, small organic molecules, and several contaminants.

Carbon dot enhanced peroxidase-like activity of platinum nanozymes

As one of the most intriguing nanozymes, the platinum (Pt) nanozyme has attracted tremendous research interest due to its various catalytic activities but its application is still limited by its poor colloidal stability and low affinity to substrates. Here, we design a highly stable Pt@carbon dot (Pt@CD) hybrid nanozyme with enhanced peroxidase (POD)-like activity (specific activity of 1877 U mg-1). The Pt@CDs catalyze the decomposition of hydrogen peroxide (H2O2) to produce singlet oxygen and hydroxyl radicals and exhibit high affinity to H2O2 and high specificity to 3,3',5,5'-tetramethyl-benzidine. We reveal that both the hydroxyl and carbonyl groups of CDs could coordinate with Pt2+ and then regulate the charge state of the Pt nanozyme, facilitating the formation of Pt@CDs and improving the POD-like activity of Pt@CDs. Colorimetric detection assays based on Pt@CDs for H2O2, dopamine, and glucose with a satisfactory detection performance are achieved. Moreover, the Pt@CDs show a H2O2-involving antibacterial effect by destroying the cell membrane. Our findings provide new opportunities for designing hybrid nanozymes with desirable stability and catalytic performance by using CDs as nucleating templates and stabilizers.

Carbon Dots: A Bright Future as Anticounterfeiting Encoding Agents

Counterfeit products and data vulnerability present significant challenges in contemporary society. Hence, various methods and technologies are explored for anticounterfeiting encoding, with luminescent tracers, particularly luminescent carbon dots (CDs), emerging as a notable solution. CDs offer promising contributions to product security, environmental sustainability, and the circular economy. This critical review aims to highlight the luminescence responsiveness of CDs to physical and chemical stimuli, achieved through nanoengineering their chemical structure. The discussion will delve into the various tunable luminescence mechanisms and decay times of CDs, investigating preferential excitations such as up-conversion, delayed fluorescence, fluorescence, room temperature phosphorescence, persistent luminescence, energy and charge transfer, as well as photo-chemical interactions. These insights are crucial for advancing anticounterfeiting solutions. Following this exploration, a systematic review will focus on the research of luminescent CDs' smart encoding applications, encompassing anticounterfeiting, product tracing, quality certification, and information encryption. Finally, the review will address key challenges in implementing CDs-based technology, providing specific insights into strategies aimed at maximizing their stability and efficacy in anticounterfeiting encoding applications.

Carbon Dots with Antioxidant Capacity for Detecting Glucose by Fluorescence and Repairing High-Glucose Damaged Glial Cells

Diabetic mellitus management extends beyond blood glucose monitoring to the essential task of mitigating the overexpression of reactive oxygen species (ROS), particularly vital for cellular repair, especially within the nervous system. Herein, antioxidant carbon dots (Arg-CDs) were designed and prepared using anhydrous citric acid, L-arginine, and ethylenediamine as sources through a hydrothermal method. Arg-CDs exhibited excellent scavenging ability to 2,2-Diphenyl-1-picrylhydrazyl (DPPH∙), and fluorescence response to hydroxyl radicals (∙OH), a characteristic representative of reactive oxygen species (ROS). Assisted by glucose oxidase and Fe2+, Arg-CDs showed a sensitive and selective response to glucose. The quenching mechanism of Arg-CDs by formed ∙OH was based on the static quenching effect (SQE). The analytical performance of this method for glucose detection encompassed a wide linear range (0.3-15 μM), a low practical limit of detection (0.1 μM) and practical applicability for blood glucose monitoring. In an in vitro model employing glial cells (BV2 cells), it was observed that high glucose medium led to notable cellular damage ascribed to the excessive ROS production from hyperglycemia. The diminished and apoptotic glial cells were gradually recovered by adding increased contents of Arg-CDs. This work illustrates a promising area that designs effective carbon dots with antioxidant capacity for the dual applications of detection and cell repairing based on the utilization of antioxidant activity.

Carboxyl groups on carbon nanodots as co-reactant sites for anodic electrochemiluminescence of tris(2,2-bipyridine)ruthenium(II)

Carbon nanodots (C-dots) with good biocompatibility have been extensively utilized as co-reactants for electrochemiluminescence (ECL) of the tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)32+) system. However, the ECL intensity of this system is still relatively low and the mechanism of C-dots as co-reactants remains unclear, which greatly limits its further application in bio-analysis. In this work, we revealed that the carboxyl groups on C-dots are co-reactant sites for Ru(bpy)32+ ECL by systematically investigating the contribution of carboxyl, hydroxyl and carbonyl groups on the surface of C-dots to the ECL intensity. Further treatment with hydrogen peroxide to increase the carboxyl-group content on C-dots resulted in a 10-fold increase in ECL intensity over the original Ru(bpy)32+/C-dots system. This work provides new insights for the rational design of ECL systems with C-dots as co-reactants and offers new chances for further applications of C-dots in the field of ECL.

Synthesis of Multicolor Carbon Dots Catalyzed by Inorganic Salts with Tunable Nonlinear Optical Properties

The nonlinear optical properties of carbon dots have been in the spotlight in recent years. In light of the complexity and diversity of factors affecting the nonlinear optical properties of carbon dots, how to reveal the origin and physical mechanism of the nonlinear optical properties of carbon dots accurately has become a problem. In this work, a template-free method was designed to prepare carbon dots via solid-phase reaction with phloroglucinol as a single carbon source and sodium bisulfate as the catalyst. This method is simple, green, safe, and easy to be prepared on a large scale. Three carbon dots with different luminous colors were obtained by simply adjusting the reaction temperature. The rise of reaction temperature affects the surface functional groups, and then hinders the luminescence of surface states, leading to the change of luminescence properties. The nonlinear optical properties of carbon dots were analyzed by the Z-scan technique. Surprisingly, all carbon dots have nonlinear optical responses, but there are differences in performance. Results prove the increase in sp2 domains may contribute to the significant improvement of the nonlinear optical properties of carbon dots, indicating a direction to improve the nonlinear optical properties of carbon dots.

Aggregation enhanced FRET: A simple but efficient strategy for the ratiometric detection of uranyl ion

Uranium is one of the most important radionuclides but could also cause potential health risks to human beings due to its radioactive and chemical toxicity. It is an urgent task to develop a simple but efficient sensing platform for UO₂²⁺, the main existing form of uranium in environment. Herein, a rhodamine-functionalized carbon dots (o-CDs-Rho) was synthesized and applied for UO₂²⁺ sensing through a simple but novel aggregation-enhanced FRET strategy. The weak FRET efficiency (16.2%) of o-CDs-Rho in dispersed solution is significantly enhanced (>77.2%) after UO₂²⁺ triggered aggregation due to the increased number of rhodamine acceptors around each CDs from dispersed 80 to aggregated 2800. This is the first ratiometric fluorescence sensor with an inverse change of fluorescence intensity at dual emission wavelengths under single-wavelength excitation for UO₂²⁺. Under optimized experiment conditions, o-CDs-Rho nanosensor shows a low detection limit of 53 nM and excellent selectivity. Meanwhile, the as-prepared nanosensor also shows high reliability and stability. These excellent properties make it successful in detecting uranium content in real samples.

Specific discrimination of zinc and manganese ions by label free dual emissive carbon dots by ratio-metric mode

Due to the worldwide ecological and environmental issues induced by heavy metal pollution, including zinc and manganese, the ratio-metric discrimination of Zn²⁺ and Mn²⁺ based on CDs is urgently required. In this work, reduced CDs (re-CDs) with the intrinsic dual emissive peaks are obtained, and specific discrimination of Zn²⁺ and Mn²⁺ is realized by re-CDs with ratio-metric mode. With the addition of Zn²⁺, the fluorescent (FL) intensity at 650 nm increases obviously, while that at 680 nm progressively decreases. However, the presence of Mn²⁺ would induce the quenching of FL intensity at 680 nm while that at 650 nm remains constant. Then the Zn²⁺ and Mn²⁺ can be separately determined with the ratio of FL intensity at 650 nm to that at 680 mm (F₆₅₀/F₆₈₀). Under optimal conditions, the limit of detection (LOD) of Zn²⁺ is determined to be 9.09 nmol/L, and that for Mn²⁺ is estimated to be 0.93 nmol/L, which is much lower than previously reported work and standard level of Zn²⁺ and Mn²⁺ permitted in drinking water by WHO. Moreover, the specific recognition of Mn²⁺ and Zn²⁺ can be realized via the addition of different masking agents (ethylenediamine for Zn²⁺ and triethanolamine for Mn²⁺). Furthermore, our results reveal that the structural changes from -NH-CO to -NC-OH induced by Zn²⁺ contribute to the shift of FL peak from 680 to 650 nm while both static and dynamic quenching processes are involved in the detection of Mn²⁺. The ratio-metric probe was successfully applied to Zn²⁺ and Mn²⁺ determination in human serum samples and Sandy Lake water.

One-Step Synthesis of White-Light-Emitting Carbon Dots for White LEDs with a High Color Rendering Index of 97

White-light-emitting carbon dots (WCDs) show innate advantages as phosphors in white light-emitting diodes (WLEDs). For WLEDs, the color rendering index (CRI) is the most important metric to evaluate its performance. Herein, WCDs are prepared by a facile one-step solvothermal reaction of trimellitic acid and o-phenylenediamine. It consists of four CDs identified by column chromatography as blue, green, yellow, red, and thus white light is a superposition of these four types of light. The mixture of the four CDs undergoes Förster resonance energy transfer to induce the generation of white light. The photoluminescence of WCDs originates from the synergistic effect of carbon core and surface states. Thereinto, the carbon core states dominate in RCDs, and the increase of amide contents and degree of conjugation promote the redshift of the emission spectra, which is further confirmed by theoretical calculations. In addition, a high CRI of 97 is achieved when the WCDs are used as phosphors to fabricate WLEDs, which is almost the highest value up to now. The multicolor LEDs can also be fabricated by using the four multicolor CDs as phosphors, respectively. This work provides a novel approach to explore the rapid preparation of low-cost, high-performance WCDs and CDs-based WLEDs.

The Formation Process and Mechanism of Carbon Dots Prepared from Aromatic Compounds as Precursors: A Review

Fluorescent carbon dots are a novel type of nanomaterial. Due to their excellent optical properties, they have extensive application prospects in many fields. Studying the formation process and fluorescence mechanism of CDs will assist scientists in understanding the synthesis of CDs and guide more profound applications. Due to their conjugated structures, aromatic compounds have been continuously used to synthesize CDs, with emissions ranging from blue to NIR. There is a lack of a systematic summary of the formation process and fluorescence mechanism of aromatic precursors to form CDs. In this review, the formation process of CDs is first categorized into three main classes according to the precursor types of aromatic compounds: amines, phenols, and polycyclics. And then, the fluorescence mechanism of CDs synthesized from aromatic compounds is summarized. The challenges and prospects are proposed in the last section.

Deciphering the catalytic mechanism of superoxide dismutase activity of carbon dot nanozyme

Nanozymes with superoxide dismutase (SOD)-like activity have attracted increasing interest due to their ability to scavenge superoxide anion, the origin of most reactive oxygen species in vivo. However, SOD nanozymes reported thus far have yet to approach the activity of natural enzymes. Here, we report a carbon dot (C-dot) SOD nanozyme with a catalytic activity of over 10,000 U/mg, comparable to that of natural enzymes. Through selected chemical modifications and theoretical calculations, we show that the SOD-like activity of C-dots relies on the hydroxyl and carboxyl groups for binding superoxide anions and the carbonyl groups conjugated with the π-system for electron transfer. Moreover, C-dot SOD nanozymes exhibit intrinsic targeting ability to oxidation-damaged cells and effectively protect neuron cells in the ischemic stroke male mice model. Together, our study sheds light on the structure-activity relationship of C-dot SOD nanozymes, and demonstrates their potential for treating of oxidation stress related diseases.

Enhancing the photoluminescence and cellular uptake of fluorescent carbon nanodots via cubosome lipid nanocarriers

Carbon nanodots (C-dots) have attracted much attention for their use in the fields of bioimaging, drug delivery, and sensing due to their excellent fluorescent and photoluminescent properties, photostability, biocompatibility, and amenability to surface modification. Herein, we report a nanocomposite formulation of C-dots (<5 nm) encapsulated in lipid-based lyotropic liquid crystalline nanoparticles (∼250 nm) via either passive diffusion or electrostatic mechanisms. The physicochemical properties of the nanocomposite formulation including particle size, surface charge, internal cubic nanostructures, and pH-dependent fluorescent properties were characterised. Upon loading of C-dots into lipid nanoparticles, the highly ordered inverse bicontinuous cubic mesophase existed in the internal phase of the nanoparticles, demonstrated by synchrotron small angle X-ray scattering, molecular dynamic simulation and cryogenic transmission electron microscopy. The pH-dependent fluorescent property of the C-dots was modified via electrostatic interaction between the C-dots and cationic lipid nanoparticles, which further enhanced the brightness of C-dots through self-quenching prevention. The cytotoxicity and cellular uptake efficiency of the developed nanocomposites were also examined in an epithelial gastric adenocarcinoma cell line (AGS) and a macrophage cell line (stimulated THP-1). Compared to free C-dots, the uptake and cell imaging potential of the C-dot nanocomposites was significantly improved, by several orders of magnitude as demonstrated by cytoplasmic fluorescent intensities using confocal microscopy. Loading C-dots into mesoporous lipid nanocarriers presents a new way of modifying C-dot physicochemical and fluorescent properties, alternative to direct chemical surface modification, and advances the bioimaging potential of C-dots by enhancing cellular uptake efficiency and converging C-dot light emission.

Electrochemical control of emission enhancement in solid-state nitrogen-doped carbon quantum dots

Because of their excellent optical and electrical properties, doped carbon quantum dots (CQDs) are expected to be used in novel film optoelectronic devices such as light-emitting diodes and solar cells. However, these device advancements are currently hindered by the elusive photophysical process of doped CQDs in solid-state films. Here, the optical properties of nitrogen-doped CQD (N-CQD) films are studied using spectro-electrochemical (SEC) methods. A distinctive photoluminescence (PL) enhancement phenomenon is observed, in which the PL intensity of the N-CQD film can be increased in both positive and negative electrochemical potential sweeps. The effect of positive potential on PL enhancement is greater (∼340% at +1.4 V), while that of negative potential is slightly weaker (∼10% at -1.4 V). To the best of our knowledge, no similar brightening process has been reported in all previous SEC studies on a variety of QDs, wherein the emission intensity can only exhibit enhancement under positive or negative potential at most. We propose that the above PL brightening is related to the weakened π-π stacking effect after electrochemical charge injection and nitrogen doping plays a crucial role in it. Finally, a low hysteresis reversible electrochemistry regulation of the PL spectrum can be achieved by increasing electrolyte fluidity with argon gas bubbling to reduce local charge aggregation.

Carbon Nanodots from an In Silico Perspective

Carbon nanodots (CNDs) are the latest and most shining rising stars among photoluminescent (PL) nanomaterials. These carbon-based surface-passivated nanostructures compete with other related PL materials, including traditional semiconductor quantum dots and organic dyes, with a long list of benefits and emerging applications. Advantages of CNDs include tunable inherent optical properties and high photostability, rich possibilities for surface functionalization and doping, dispersibility, low toxicity, and viable synthesis (top-down and bottom-up) from organic materials. CNDs can be applied to biomedicine including imaging and sensing, drug-delivery, photodynamic therapy, photocatalysis but also to energy harvesting in solar cells and as LEDs. More applications are reported continuously, making this already a research field of its own. Understanding of the properties of CNDs requires one to go to the levels of electrons, atoms, molecules, and nanostructures at different scales using modern molecular modeling and to correlate it tightly with experiments. This review highlights different in silico techniques and studies, from quantum chemistry to the mesoscale, with particular reference to carbon nanodots, carbonaceous nanoparticles whose structural and photophysical properties are not fully elucidated. The role of experimental investigation is also presented. Hereby, we hope to encourage the reader to investigate CNDs and to apply virtual chemistry to obtain further insights needed to customize these amazing systems for novel prospective applications.

A smartphone-integrated optical sensing platform based on Lycium ruthenicum derived carbon dots for real-time detection of Ag. THE SCIENCE OF THE TOTAL ENVIRONMENT 2022;825:153913. [PMID: 35189228 DOI: 10.1016/j.scitotenv.2022.153913]

Growing global environmental pollution problems challenge the need for converting biomass into an advantageous product. In this paper, Lycium ruthenicum is successfully turned into beneficial green emissive (527 nm) fluorescent nitrogen doping carbon dots (N-CDs) via the hydrothermal treatment for the first time. The horizontal and vertical dimensions of N-CDs are demonstrated to be about 4.5 and 0.73 nm, respectively. The N-CDs possess an extremely stable green fluorescence and quantum yield up to 21.8%. Meaningfully, N-CDs exhibit a good linear relationship with Ag⁺ in the range of 0.7-36 μM, and its detection limit is determined to be 59 nM. The practicability of the fluorescent probe is further validated in lake water and the satisfactory spiked recoveries of Ag⁺ ranges from 98.99% to 104.19%. Besides, based on the sensitive and selective photoluminescence quenching properties, a smartphone-based laboratory device and RGB analysis software are used to directly capture and analyze fluorescence images with a sensitive detection limit of 83 nM for Ag⁺. This novel sensor based on N-CDs and smartphone provides a reliable way for on-site monitoring of Ag⁺ and expands application prospect in the field of environmental pollution detection.

Electron-phonon coupling-assisted universal red luminescence of o-phenylenediamine-based carbon dots

Due to the complex core-shell structure and variety of surface functional groups, the photoluminescence (PL) mechanism of carbon dots (CDs) remain unclear. o-Phenylenediamine (oPD), as one of the most common precursors for preparing red emissive CDs, has been extensively studied. Interestingly, most of the red emission CDs based on oPD have similar PL emission characteristics. Herein, we prepared six different oPD-based CDs and found that they had almost the same PL emission and absorption spectra after purification. Structural and spectral characterization indicated that they had similar carbon core structures but different surface polymer shells. Furthermore, single-molecule PL spectroscopy confirmed that the multi-modal emission of those CDs originated from the transitions of different vibrational energy levels of the same PL center in the carbon core. In addition, the phenomenon of "spectral splitting" of single-particle CDs was observed at low temperature, which confirmed these oPD-based CDs were unique materials with properties of both organic molecules and quantum dots. Finally, theoretical calculations revealed their potential polymerization mode and carbon core structure. Moreover, we proposed the PL mechanism of red-emitting CDs based on oPD precursors; that is, the carbon core regulates the PL emission, and the polymer shell regulates the PL intensity. Our work resolves the controversy on the PL mechanism of oPD-based red CDs. These findings provide a general guide for the mechanism exploration and structural analysis of other types of CDs.

Pressure-Induced Bifurcation in the Photoluminescence of Red Carbon Quantum Dots: Coexistence of Emissions from Surface Groups and Nitrogen-Doped Cores

Carbon quantum dots (CDs) with favorable fluorescent properties have stimulated considerable effort to modulate their photoluminescence (PL) for bioimaging and sensing. However, the fluorescent mechanisms are still only partially understood due to the diverse physicochemical properties of CDs prepared by various synthesis methods and postpreparation processes. In this report, pressure-induced bifurcation of PL is reported in red carbon quantum dots (R-CDs) for the first time. The splitting of PL into an irreversible blue-shifted peak and a reversible red-shifted peak under pressure suggests the coexistence of multiple fluorescent mechanisms in R-CDs, i.e., emissions from surface groups and nitrogen-doped cores. The concentration and excitation laser energy dependencies of pressure-induced bifurcation, as well as the time-resolved PL, further support the coexistence of multiple emitters. Our results provide a method for distinguishing between the different fluorescent mechanisms related to surface groups and carbon cores in CDs.

Fluorescent Mechanism in Zero-Dimensional Carbon Nanomaterials: A Review

Fluorescent carbon dots (CDs) have acquired growing interest from different areas over decades. Their fascinating property of tunable fluorescence by changing the excitation wavelength has attracted researchers worldwide. Understanding the mechanisms behind fluorescence is of great importance, as they help with the synthesis and applications, significantly when narrowed down to applications with color-tunable mechanisms. But, due to a lack of practical and theoretical information, the fluorescence mechanisms of CDs remain unknown, preventing the production of CDs with desired optical qualities. This review focuses on the PL mechanisms of carbon dots. The quantum confinement effect determined the carbon core, the surface and edge states determined by various surface defects and the connected functional/chemical groups on the surface/edges, the molecular state solely determined the fluorophores in the interior or surface of the CDs, and the Crosslink Enhanced Emission Effect are the currently confirmed PL mechanisms.

Acidic Groups Functionalized Carbon Dots Capping Channels of a Proton Conductive Metal-Organic Framework by Coordination Bonds to Improve the Water-Retention Capacity and Boost Proton Conduction

Crystalline porous materials, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been demonstrated to be versatile material platforms for the development of solid proton conductors. However, most crystalline porous proton conductors suffer from decreasing proton conductivity with increasing temperature due to releasing water molecules, and this disadvantage severely restricts their practical application in electrochemical devices. In this work, for the first time, hydrophilic carbon dots (CDs) were utilized to hybridize with high proton conductivity MOF-802, which is a model of MOF proton conductors, aiming to improve its water-retention capacity and thus enhance proton conduction. The resultant CDs@MOF-802 exhibits impregnable proton conduction with increasing temperature, and the proton conductivity reaches 10^-1 S cm^-1, much superior to that of MOF-802, making CDs@MOF-802 one of the most efficient MOF proton conductors reported so far. This study provides a new strategy to improve the water-retention capacity of porous proton conductors and further realize excellent proton conduction.

Recent Advances in Carbon Nanodots: A Promising Nanomaterial for Biomedical Applications

Carbon nanodots (CNDs) are an emerging class of nanomaterials and have generated much interest in the field of biomedicine by way of unique properties, such as superior biocompatibility, stability, excellent photoluminescence, simple green synthesis, and easy surface modification. CNDs have been featured in a host of applications, including bioimaging, biosensing, and therapy. In this review, we summarize the latest research progress of CNDs and discuss key advances in our comprehension of CNDs and their potential as biomedical tools. We highlighted the recent developments in the understanding of the functional tailoring of CNDs by modifying dopants and surface molecules, which have yielded a deeper understanding of their antioxidant behavior and mechanisms of action. The increasing amount of in vitro research regarding CNDs has also spawned interest in in vivo practices. Chief among them, we discuss the emergence of research analyzing CNDs as useful therapeutic agents in various disease states. Each subject is debated with reflection on future studies that may further our grasp of CNDs.

Insights into photoluminescence mechanisms of carbon dots: advances and perspectives

Carbon dots (CDs) are potentially useful in many areas such as bioimaging, light-emitting diodes, and sensing because of their excellent optical properties, high biocompatibility, and low toxicity. Knowledge of their photoluminescence (PL) mechanisms, which have been widely studied, is of significance in guiding the synthesis and promoting applications of CDs with tunable PL emissions. However, the intrinsic mechanism of PL emission remains unclear, and a unified mechanism has not been found because of differences in particle structures. This review generalizes the categories of CDs, noting their structural diversity. Three types of PL mechanism pertaining to structural differences are outlined: internal factors dominated emission (including the conjugation effect, the surface state, and the synergistic effect), external factors dominated emission (including the molecular state and the environment effect), and crosslink-enhanced emission. Optical applications of CDs are also briefly mentioned. Finally, the prospects for research into PL mechanisms are discussed, noting the remaining challenges and directions for future work.

Quantitatively Switchable pH-Sensitive Photoluminescence of Carbon Nanodots

pH sensing plays a key role in the life sciences as well as the environmental, industrial, and agricultural fields. Carbon nanodots (C-dots) with small size, low toxicity, and excellent stability hold great potential in pH sensing as nanoprobes due to their intrinsic pH-sensitive photoluminescence (PL). Nonetheless, the undesirable sensitivity and response range of C-dot PL toward pH cannot meet the requirements of practical applications, and the unclear pH-sensitive PL mechanism makes it difficult to control their pH sensitivity. Herein, the quantitative correlation of pH-sensitive PL with specific surface structures of C-dots is uncovered for the first time, to our best knowledge. The association of carboxylate and H⁺ increases the ratio of nonradiation to radiation decay of C-dots through excited-state proton transfer, resulting in the decrease of PL intensity. Meanwhile, the dissociation of α-H in β-dicarbonyl forming enolate increases the extent of delocalization of the C-dots conjugated system, which induces the PL broadening to the red region and a decreasing intensity. Based on the understanding of the pH-sensitive PL mechanism, the pH-sensitive PL of C-dots can be switched by quantitative modulation of carboxyl and β-dicarbonyl groups to achieve a desirable pH response range with high sensitivity. This work contributes to a better understanding of the pH-sensitive PL of C-dots and therefore presents an effective strategy for controllably tuning their pH sensitivity, facilitating the rational design of C-dot-based pH sensors.

A Mini Review on pH-Sensitive Photoluminescence in Carbon Nanodots

Carbon nanodots (C-dots) with sp2/sp3 framework and diameter of <10 nm contain abundant functional groups or polymers on their surface. C-dots have attracted immense attention because of their unique optical properties, excellent biocompatibility, facile preparation, and low cost. With these merits, C-dots have been used in a wide range of applications including sensing, bioimaging, catalysis, and light-emitting devices. C-dots exhibit good optical properties, such as tunable emission wavelength, good photostability, nonblinking, up-conversion emission, etc. Of note, C-dots show intrinsic pH-sensitive photoluminescence (PL), indicating their great potential for pH sensing, especially in biotic pH sensing. In this review, we systematically summarize the pH-sensitive PL properties and the pH-sensitive PL mechanism, as well as recent research progress of C-dots in pH sensing. The current challenges of pH-sensitive C-dots and their future research focus are also proposed here. We anticipate this review might be of great significance for understanding the characteristics of pH-sensitive C-dots and the development of photoluminescent nanomaterials with pH-sensitive properties.

Surface chemistry tuning the selectivity of carbon nanodots towards Hg2+ recognition

Fluorescence quenching of carbon nanodots by metal ions has been extensively applied for the determination of oligonucleotides, proteins, small molecules and metal ions. However, the problem of poor selectivity originating from the coordination of surface oxygen-containing groups to many kinds of metal ions has limited the prosperity of carbon nanodots in detection field. Herein, the specific recognition of carbon nanodots to Hg²⁺ is controlled by rational regulation of the surface structure of carbon nanodots. Passivation of the surface carboxyl and hydroxyl groups plays a decisive role in inhibiting the binding of metal ions with carbon nanodots. Upon the attachment of Hg²⁺ specific recognition unit, carbon nanodots exhibited a high selectivity to Hg²⁺. This work facilitates to rationally design the surface structure of carbon nanodots to obtain the desirable selective recognition ability.

Carbon dots-based dual-emission ratiometric fluorescence sensor for dopamine detection

The detection of Dopamine (DA) is significant for disease surveillance and prevention. However, the development of the precise and simple detection techniques is still at a preliminary stage due to their high tester requirements, time-consuming process, and low accuracy. In this work, we present a novel dual-emission ratiometric fluorescence sensing system based on a hybrid of carbon dots (CDs) and 7-amino-4-methylcoumarin (AMC) to quickly monitor the DA concentration. Linked via amide bonds, the CDs and AMC offered dual-emissions with peaks located at 455 and 505 nm, respectively, under a single excitation wavelength of 300 nm. Attributed to the fluorescence of the CDs and AMC in the nanohybrid system can be quenched by DA, the concentration of DA could be quantitatively detected by monitoring the ratiometric ratio change in fluorescent intensity. More importantly, the CDs-AMC-based dual-emission ratiometric fluorescence sensing system demonstrated a remarkable linear relationship in the range of 0-33.6 μM to detection of DA, and a low detection limit of 5.67 nM. Additionally, this sensor successfully applied to the detection of DA in real samples. Therefore, the ratiometric fluorescence sensing system may become promising to find potential applications in biomedical dopamine detection.

Rational Design of Multi-Color-Emissive Carbon Dots in a Single Reaction System by Hydrothermal

As an emerging building unit, carbon dots (CDs) have been igniting the revolutionaries in the fields of optoelectronics, biomedicine, and bioimaging. However, the difficulty of synthesizing CDs in aqueous solution with full-spectrum emission severely hinders further investigation of their emission mechanism and their extensive applications in white light emitting diodes (LEDs). Here, the full-color-emission CDs with a unique structure consisting of sp 3-hybridized carbon cores with small domains of partially sp 2-hybridized carbon atoms are reported. First-principle calculations are initially used to predict that the transformation from sp 3 to sp 2 hybridization redshifts the emission of CDs. Guided by the theoretical predictions, a simple, convenient, and controllable route to hydrothermally prepare CDs in a single reaction system is developed. The prepared CDs have full-spectrum emission with an unprecedented two-photon emission across the whole visible color range. These full-color-emission CDs can be further nurtured by slight modifications of the reaction conditions (e.g., temperature, pH) to generate the emission color from blue to red. Finally a flexible LEDs with full-color emission by using epoxy CDs films is developed, indicating that the strategy affords an industry translational potential over traditional fluorophores.

Excitons in Carbonic Nanostructures

Unexpectedly bright photoluminescence emission can be observed in materials incorporating inorganic carbon when their size is reduced from macro–micro to nano. At present, there is no consensus in its understanding, and many suggested explanations are not consistent with the broad range of experimental data. In this Review, I discuss the possible role of collective excitations (excitons) generated by resonance electronic interactions among the chromophore elements within these nanoparticles. The Förster-type resonance energy transfer (FRET) mechanism of energy migration within nanoparticles operates when the composing fluorophores are the localized electronic systems interacting at a distance. Meanwhile, the resonance interactions among closely located fluorophores may lead to delocalization of the excited states over many molecules resulting in Frenkel excitons. The H-aggregate-type quantum coherence originating from strong coupling among the transition dipoles of adjacent chromophores in a co-facial stacking arrangement and exciton transport to emissive traps are the basis of the presented model. It can explain most of the hitherto known experimental observations and must stimulate the progress towards their versatile applications.