Internal Nanoparticle Structure of Temperature-Responsive Self-Assembled PNIPAM-b-PEG-b-PNIPAM Triblock Copolymers in Aqueous Solutions: NMR, SANS, and Light Scattering Studies

The preparation and dual-mode detection of ascorbic acid based on poly(N-isopropylacrylamide) nanogel with oxidase-like activity

Nanozymes have recently become a research hotspot because of the advantages of good stability, excellent catalytic performance and easy storage in comparison to natural enzymes. Nanozymes with oxidase-like activity get special attention because they needn't the participation of hydrogen peroxide. In this paper, poly(N-isopropylacrylamide) nanogel with oxidase-like activity was synthesized for the first time. The catalytic mechanism was explored by EPR and UV spectroscopy after adding specific trapping agents of ROS, and the results showed that PNIPAM NG can catalyze O2 to 1O2. In the presence of PNIPAM NG, o-phenylenediamine (OPD) and ascorbic acid (AA) can be oxidized to 2,3-diaminophenazine (oxOPD) and dehydroascorbic acid (DHA), and DHA can further react with OPD to produce a fluorescence substance. The colorimetric and fluorescence detection platforms for AA were constructed based on the above principles. Both platforms have satisfactory results in real samples. The fluorescence platform has better sensitivity and selectivity than the colorimetric platform.

Preparation and properties of hydrogel photonic crystals assembled by biodegradable nanogels

Thermally induced physical hydrogels formed through the sol-gel transition of nanogels usually lose structural color above phase transition temperature (Tp). Herein, temperature/pH/redox-responsive nanogels that undergo sol-gel transition still keep structural colors above the Tp have been synthesized and studied. N-isopropylacrylamide (NIPAm) was copolymerized with N-tert-butylacrylamide (TBA) and N-acrylamido-l-phenylalanine (Aphe) to form P(NIPAm/TBA/Aphe) nanogel crosslinked with N,N'-bis(acryloyl)cystine (BISS) (referred to as PNTA-BISS). PNTA-BISS nanogel with a broad range of biodegradable crosslinker BISS content can achieve a reversible sol-gel transition above the Tp, surprisingly, while PNTA nanogels with a comparable content of biodegradable N,N'-Bis(acryloyl)cystam (BAC) crosslinker (referred to as PNTA-BAC) didn't form sol-gel transition. Although BISS and BAC possess same disulfide bonds with redox properties, BISS, unlike BAC, is water-soluble and features two carboxyl groups. The mechanism by which PNTA-BISS nanogels form hydrogel photonic crystals has been deeply explored with temperature-variable NMR. The results showed the introduction of Aphe with both steric hindrance and carboxyl groups greatly slowed down the shrinkage of PNTA-BISS nanogels. Therefore, PNTA-BISS nanogels can form sol-gel transition and further structural color of hydrogel photonic crystals due to carboxyl groups above the Tp. Furthermore, the properties of biodegradable hydrogel photonic crystals above the Tp were investigated for the first time, attributed to the presence of the strong reducing agent 1,4-dithiothreitol (DTT). When loaded with doxorubicin (DOX), PNTA-BISS exhibited favorable degradation properties under the influence of DTT. In summary, the PNTA-BISS nanogel, in addition to its in-situ gelation capabilities, demonstrated degradability, potentially providing a novel nanoplatform for applications in drug delivery, biotechnology, and related fields.

Innovations in Breaking Barriers: Liposomes as Near-Perfect Drug Carriers in Ischemic Stroke Therapy

Liposomes, noted for their tunable particle size, surface customization, and varied drug delivery capacities, are increasingly acknowledged in therapeutic applications. These vesicles exhibit surface flexibility, enabling the incorporation of targeting moieties or peptides to achieve specific targeting and avoid lysosomal entrapment. Internally, their adaptable architecture permits the inclusion of a broad spectrum of drugs, contingent on their solubility characteristics. This study thoroughly reviews liposome fabrication, surface modifications, and drug release mechanisms post-systemic administration, with a particular emphasis on drugs crossing the blood-brain barrier (BBB) to address lesions. Additionally, the review delves into recent developments in the use of liposomes in ischemic stroke models, offering a comparative evaluation with other nanocarriers like exosomes and nano-micelles, thereby facilitating their clinical advancement.

Assembling PNIPAM-Capped Gold Nanoparticles in Aqueous Solutions

Employing small-angle X-ray scattering (SAXS), we explore the conditions under which assembly of gold nanoparticles (AuNPs) grafted with the thermosensitive polymer poly(N-isopropylacrylamide) (PNIPAM) emerges. We find that short-range order assembly emerges by combining the addition of electrolytes or polyelectrolytes with raising the temperature of the suspensions above the lower-critical solution temperature (LCST) of PNIPAM. Our results show that the longer the PNIPAM chain is, the better organization in the assembled clusters. Interestingly, without added electrolytes, there is no evidence of AuNPs assembly as a function of temperature, although untethered PNIPAM is known to undergo a coil-to-globule transition above its LCST. This study demonstrates another approach to assembling potential thermosensitive nanostructures for devices by leveraging the unique properties of PNIPAM.

Remarkable sol-gel transition of PNIPAm-based nanogels via large steric hindrance of side-chains

While the block/graft/branched structures are widely studied to favor the reversible physical gelation, there are no reports regarding the steric hindrance-induced sol-gel transition of PNIPAm-based nanogels above their phase transition temperature (Tp). Generally, the introduction of hydrophobic components into poly (N-isopropylacrylamide) (PNIPAm)-based nanogels only led to collapse and lower viscosity instead of the sol-gel transition upon heating above the Tp. Herein, the results of temperature-variable 1HNMR and FTIR confirm that the introduction of hydrophobic N-tert-butylacrylamide (TBA) with the large steric hindrance of side groups of N-tert-butyl to form NIPAm/TBA copolymer nanogels can dramatically slow down the dehydration of all the hydrophobic alkyl groups, thus resulting in the formation of thermally induced sol-gel transition above the Tp. Furthermore, the N-acrylamido-L-phenylalanine (APhe) monomer composed of a strongly water absorbing carboxyl group and a phenyl group with larger steric hindrance is studied to form P(NIPAm/TBA/APhe) terpolymer nanogels which can self-assemble into colorful colloidal crystals. Surprisingly, owing to the synergistic effect between the water absorbing carboxyl group and the steric hindrance group on the same side group, these colloidal crystals can achieve sol-gel transition above Tp, forming a physically crosslinked colorful hydrogel. This work is expected to greatly advance the design, synthesis, and application of the sol-gel transition of PNIPAm-based nanogel systems.

Reversible Thermo-Optical Response Nanocomposites Based on RAFT Symmetric Triblock Copolymers (ABA) of Acrylamide and N-Isopropylacrylamide and Gold Nanoparticles

The development of composite materials with thermo-optical properties based on smart polymeric systems and nanostructures have been extensively studied. Due to the fact of its ability to self-assemble into a structure that generates a significant change in the refractive index, one of most attractive thermo-responsive polymers is poly(N-isopropylacrylamide) (PNIPAM), as well as its derivatives such as multiblock copolymers. In this work, symmetric triblock copolymers of polyacrylamide (PAM) and PNIPAM (PAM_x-b-PNIPAM_y-b-PAM_x) with different block lengths were prepared by reversible addition-fragmentation chain-transfer polymerization (RAFT). The ABA sequence of these triblock copolymers was obtained in only two steps using a symmetrical trithiocarbonate as a transfer agent. The copolymers were combined with gold nanoparticles (AuNPs) to prepare nanocomposite materials with tunable optical properties. The results show that copolymers behave differently in solution due to the fact of variations in their composition. Therefore, they have a different impact on the nanoparticle formation process. Likewise, as expected, an increase in the length of the PNIPAM block promotes a better thermo-optical response.

Temperature dependent single-chain structure of poly[3-(acrylamidopropyl-dimethyl-ammonium) propyl-1-sulfonate] via small-angle neutron scattering

Responsive polyzwitterionic materials have become important for a range of applications such as environmental remediation and targeted drug delivery. Much is known about the macroscopic phase-behaviors of such materials, but how the smaller scale single-chain structures of polyzwitterions respond to external stimuli is not well understood, especially at temperatures close to their phase boundaries. Such chain conformation responses are important in directing larger-scale associative properties. Here, we study the temperature dependent single-chain structure of a model polysulfobetaine, poly[3-(acrylamidopropyl-dimethyl-ammonium) propyl-1-sulfonate], using small angle neutron scattering. In the absence of salt, we find that temperature has a large effect on solvent quality with a decreasing trend from good solvent conditions at 50 °C to poor solvent at 10 °C (a temperature just above the cloud point of 7.6 °C) and an estimated theta temperature of 39 °C. When 100 mM NaCl is present, the solvent quality is good with weak temperature dependence. Without salt present, the polymer chain appears to have a nearly Gaussian coil conformation and the backbone becomes slightly more rigid as the temperature is lowered to the cloud point as determined by the Debye-local rod model on a Kratky plot. The addition of salt has a notable effect on the intra-chain correlations where an increase in chain dimensions to a swollen coil conformation and an increase in chain rigidity is observed at 100 mM NaCl in D2O, however, with a negligible temperature dependence.

Liquid-liquid phase separated microdomains of an amphiphilic graft copolymer in a surfactant-rich medium

The liquid-liquid phase separation (LLPS) of amphiphilic thermoresponsive copolymers can lead to the formation of micron-sized domains, known as simple coacervates. Due to their potential to confine active principles, these copolymer-rich droplets have gained interest as encapsulating agents. Understanding and controlling the conditions inducing this LLPS is therefore essential for applicative purposes and requires thorough fundamental studies on self-coacervation. In this work, we investigate the LLPS of a comb-like graft copolymer (PEG-g-PVAc) consisting of a poly(ethylene glycol) backbone (6 kDa) with ∼2-3 grafted poly(vinyl acetate) chains, and a PEG/PVAc weight ratio of 40/60. Specifically, we report the effect of various water-soluble additives on its phase separation behavior. Kosmotropes and non-ionic surfactants were found to decrease the phase separation temperature of the copolymer, while chaotropes and, above all, ionic surfactants increased it. We then focus on the phase behavior of PEG-g-PVAc in the presence of sodium citrate and a C_14-15 E₇ non-ionic surfactant (N45-7), defining the compositional range for the generation of LLPS microdomains at room temperature and monitoring their formation with fluorescence confocal microscopy. Finally, we determine the composition of the microdomains through confocal Raman microscopy, demonstrating the presence of PEG-g-PVAc, N45-7, and water. These results expand our knowledge on polymeric self-coacervation, clarifying the optimal conditions and composition needed to obtain LLPS microdomains with encapsulation potential at room temperature in surfactant-rich formulations.

Association Behavior of Amphiphilic ABA Triblock Copolymer Composed of Poly(2-methoxyethyl acrylate) (A) and Poly(ethylene oxide) (B) in Aqueous Solution

Poly(2-methoxyethyl acrylate) (PMEA) and poly(ethylene oxide) (PEO) have protein-antifouling properties and blood compatibility. ABA triblock copolymers (PMEA_l-PEO₁₁₃₄₀-PMEA_m (MEOM_n; n is average value of l and m)) were prepared using single-electron transfer-living radical polymerization (SET-LRP) using a bifunctional PEO macroinitiator. Two types of MEOM_n composed of PMEA blocks with degrees of polymerization (DP = n) of 85 and 777 were prepared using the same PEO macroinitiator. MEOM_n formed flower micelles with a hydrophobic PMEA (A) core and hydrophilic PEO (B) loop shells in diluted water with a similar appearance to petals. The hydrodynamic radii of MEOM₈₅ and MEOM₇₇₇ were 151 and 108 nm, respectively. The PMEA block with a large DP formed a tightly packed core. The aggregation number (N_agg) of the PMEA block in a single flower micelle for MEOM₈₅ and MEOM₇₇₇ was 156 and 164, respectively, which were estimated using a light scattering technique. The critical micelle concentrations (CMCs) for MEOM₈₅ and MEOM₇₇₇ were 0.01 and 0.002 g/L, respectively, as determined by the light scattering intensity and fluorescence probe techniques. The size, N_agg, and CMC for MEOM₈₅ and MEOM₇₇₇ were almost the same independent of hydrophobic DP of the PMEA block.

Oxidative degradation of triblock-copolymer surfactant and its effects on self-assembly

We investigate the degradation behaviour of a triblock-copolymer surfactant made from polyethylene oxide (PEO) and polypropylene oxide (PPO) (PEO-PPO-PEO), highlighting how the aggregation behaviour of this polymer in water alters with ageing. Samples aged at room temperature were compared to samples degraded using accelerated ageing at elevated temperatures. We find that large mass losses occurred to the polymer surfactant which resulted in a change in the aggregation behaviour, with larger, rod-like or planar aggregates forming at longer degradation times. We look at how this change in aggregation behaviour changes the formulation stability of these polymers, specifically, the interaction of the polymer surfactant with poly(N-isopropylacrylamide) microgels. It is known that these species associate and form gels at elevated temperatures. This paper highlights how commonly used polymeric surfactants can degrade over time, resulting in dramatic changes to aggregation behaviour and therefore, formulation properties.

Polymer Architecture Effects on Poly(N,N-Diethyl Acrylamide)-b-Poly(Ethylene Glycol)-b-Poly(N,N-Diethyl Acrylamide) Thermoreversible Gels and Their Evaluation as a Healthcare Material

Thermoreversible gels which transition between liquid-like and solid-like states when warmed have enabled significant novel healthcare technologies. Poly(N,N-diethyl acrylamide) (PDEA) is a thermoresponsive polymer which can be used as a trigger to form thermoreversible gels, however its use in these materials is limited and crucial design principles are unknown. Herein ABA copolymers with the structure PDEA-b-poly(ethylene glycol) (PEG)-b-PDEA are synthesized to give four block copolymers with varied molecular weight of PDEA and PEG blocks. Rheometry on solutions of the block copolymers reveals that high molecular weight PEG blocks are required to form thermoreversible gels with predominantly solid-like behavior. Furthermore, small-angle X-ray scattering elucidates clear differences in the nanostructure of the copolymer library which can be linked to distinct rheological behaviors. A thermoreversible gel formulation based on PDEA (20 kDa)-b-PEG (10 kDa)-b-PDEA (20 kDa) is designed by optimizing the polymer concentration and ionic strength. It is found that the gel is mucoadhesive, stable, and non-toxic, as well as giving controlled release of a hydrophobic drug. Overall, this study provides insight into the effect of polymer architecture on the nanostructure and rheology of PDEA-b-PEG-b-PDEA and presents the development of a highly functional thermoreversible gel with high promise for healthcare applications.

Hybrid Nanoparticles for Haloperidol Encapsulation: Quid Est Optimum?

The choice of drug delivery carrier is of paramount importance for the fate of a drug in a human body. In this study, we have prepared the hybrid nanoparticles composed of FDA-approved Eudragit L100-55 copolymer and polymeric surfactant Brij98 to load haloperidol-an antipsychotic hydrophobic drug used to treat schizophrenia and many other disorders. This platform shows good drug-loading efficiency and stability in comparison to the widely applied platforms of mesoporous silica (MSN) and a metal-organic framework (MOF). ZIF8, a biocompatible MOF, failed to encapsulate haloperidol, whereas MSN only showed limited encapsulation ability. Isothermal titration calorimetry showed that haloperidol has low binding with the surface of ZIF8 and MSN in comparison to Eudragit L100-55/Brij98, thus elucidating the striking difference in haloperidol loading. With further optimization, the haloperidol loading efficiency could reach up to 40% in the hybrid Eudragit L100-55/Brij98 nanoparticles with high stability over several months. Differential scanning calorimetry studies indicate that the encapsulated haloperidol stays in an amorphous state inside the Eudragit L100-55/Brij98 nanoparticles. Using a catalepsy and open field animal tests, we proved the prolongation of haloperidol release in vivo, resulting in later onset of action compared to the free drug.

Core-functionalized nanoaggregates: preparation via polymerization-induced self-assembly and their applications

Core-functionalized nanoaggregates can be prepared by a combination of polymerization-induced self-assembly (PISA) and post-polymerization modification.

Development of aqueous size exclusion chromatography conditions to characterize polyzwitterion-block-N-isopropyl acrylamide copolymers

Block copolymers that exhibit both an upper critical solution temperature and a lower critical solution temperature are difficult to characterize due to inherent solubility difference between the two blocks. For example, accurate determination of both the molar mass and molar mass distribution is challenging for polyzwitterion-block-N-isopropyl acrylamide (NIPAM) copolymers in aqueous solutions due to self-assembly. However, there are a few examples of using size exclusion chromatography (SEC) for characterization, in which hexafluoro isopropanol (HFIP) is used in all cases. Yet, researchers are hesitant to use this solvent due to how expensive and hazardous HFIP is. Therefore, alternatives to HFIP for SEC analysis would be desirable. Here, a systematic methodology featuring aqueous SEC is demonstrated using several solvent conditions to enable the elution of polyzwitterion-block-NIPAM copolymers on Agilent PolarGel^† and Tosoh TSKgel^† column sets. These SEC conditions include 0.2 M KI in water on the PolarGel columns and 0.2 M KI/ 30% DMF in water on the PolarGel and TSKgel columns. These aqueous systems can be utilized for the characterization of similar water-soluble block copolymers that are relevant for drug delivery and other biomedical applications.

Tuneable peptide cross-linked nanogels for enzyme-triggered protein delivery

Many diseases are associated with the dysregulated activity of enzymes, such as matrix metalloproteinases (MMPs). This dysregulation can be leveraged in drug delivery to achieve disease- or site-specific cargo release. Self-assembled polymeric nanoparticles are versatile drug carrier materials due to the accessible diversity of polymer chemistry. However, efficient loading of sensitive cargo, such as proteins, and introducing functional enzyme-responsive behaviour remain challenging. Herein, peptide-crosslinked, temperature-sensitive nanogels for protein delivery were designed to respond to MMP-7, which is overexpressed in many pathologies including cancer and inflammatory diseases. The incorporation of N-cyclopropylacrylamide (NCPAM) into N-isopropylacrylamide (NIPAM)-based copolymers enabled us to tune the polymer lower critical solution temperature from 33 to 44 °C, allowing the encapsulation of protein cargo and nanogel-crosslinking at slightly elevated temperatures. This approach resulted in nanogels that were held together by MMP-sensitive peptides for enzyme-specific protein delivery. We employed a combination of cryogenic transmission electron microscopy (cryo-TEM), dynamic light scattering (DLS), small angle neutron scattering (SANS), and fluorescence correlation spectroscopy (FCS) to precisely decipher the morphology, self-assembly mechanism, enzyme-responsiveness, and model protein loading/release properties of our nanogel platform. Simple variation of the peptide linker sequence and combining multiple different crosslinkers will enable us to adjust our platform to target specific diseases in the future.

Thermoresponsive Diblock Copolymer Films with a Linear Shrinkage Behavior and Its Potential Application in Temperature Sensors

The linear shrinkage behavior in thermoresponsive diblock copolymer films and its potential application in temperature sensors are investigated. The copolymer is composed of two thermoresponsive blocks with different transition temperatures (TTs): di(ethylene glycol) methyl ether methacrylate (MEO₂MA; TT₁ = 25 °C) and poly(ethylene glycol) methyl ether methacrylate (OEGMA₃₀₀; TT₂ = 60 °C) with a molar ratio of 1:1. Aqueous solutions of PMEO₂MA-b-POEGMA₃₀₀ show a three-stage transition upon heating as seen with optical transmittance and small-angle X-ray scattering: dissolution (T < TT₁), self-assembled micelles with core-shell structure (TT₁ < T < TT₂), and aggregation of collapsed micelles (T > TT₂). Due to the restrictions in the polymer chain arrangement introduced by the solid Si substrate, spin-coated PMEO₂MA-b-POEGMA₃₀₀ films exhibit an entirely different internal structure and transition behavior. Neutron reflectivity shows the absence of an ordered structure normal to the Si substrate in as-prepared PMEO₂MA-b-POEGMA₃₀₀ films. After exposure to D₂O vapor for 3 h and then increasing the temperature above its TT₁ and TT₂, the ordered structure is still not observed. Only a D₂O enrichment layer is formed close to the hydrophilic Si substrate. Such PMEO₂MA-b-POEGMA₃₀₀ films show a linear shrinkage between TT₁ and TT₂ in a D₂O vapor atmosphere. This special behavior can be attributed to the synergistic effect between the restrained collapse of the PMEO₂MA blocks by the still swollen POEGMA₃₀₀ blocks and the impedance of chain arrangement by the Si substrate. Based on this unique behavior, spin-coated PMEO₂MA-b-POEGMA₃₀₀ films are further prepared into a temperature sensor by implementing Ag electrodes. Its resistance decreases linearly with temperature between TT₁ and TT₂.

Thermo-responsive polymers: Applications of smart materials in drug delivery and tissue engineering

Synthetic polymers are attracting great attention in the last decades for their use in the biomedical field as nanovectors for controlled drug delivery, hydrogels and scaffolds enabling cell growth. Among them, polymers able to respond to environmental stimuli have been recently under growing consideration to impart a "smart" behavior to the final product, which is highly desirable to provide it with a specific dynamic and an advanced function. In particular, thermo-responsive polymers, materials able to undergo a discontinuous phase transition or morphological change in response to a temperature variation, are among the most studied. The development of the so-called controlled radical polymerization techniques has paved the way to a high degree of engineering for the polymer architecture and properties, which in turn brought to a plethora of sophisticated behaviors for these polymers by simply switching the external temperature. These can be exploited in many different fields, from separation to advanced optics and biosensors. The aim of this review is to critically discuss the latest advances in the development of thermo-responsive materials for biomedical applications, including a highly controlled drug delivery, mediation of cell growth and bioseparation. The focus is on the structural and design aspects that are required to exploit such materials for cutting-edge applications in the biomedical field.

Improving the Colloidal Stability of Temperature-Sensitive Poly(N-isopropylacrylamide) Solutions Using Low Molecular Weight Hydrophobic Additives

Poly(N-isopropylacrylamide) (PNIPAM) is an important polymer with stimuli-responsive properties, making it suitable for various uses. Phase behavior of the temperature-sensitive PNIPAM polymer in the presence of four low-molecular weight additives tert-butylamine (t-BuAM), tert-butyl alcohol (t-BuOH), tert-butyl methyl ether (t-BuME), and tert-butyl methyl ketone (t-BuMK) was studied in water (D₂O) using high-resolution nuclear magnetic resonance (NMR) spectroscopy and dynamic light scattering. Phase separation was thermodynamically modeled as a two-state process which resulted in a simple curve which can be used for fitting of NMR data and obtaining all important thermodynamic parameters using simple formulas presented in this paper. The model is based on a modified van't Hoff equation. Phase separation temperatures T _p and thermodynamic parameters (enthalpy and entropy change) connected with the phase separation of PNIPAM were obtained using this method. It was determined that T _p is dependent on additives in the following order: T _p(t-BuAM) > T _p(t-BuOH) > T _p(t-BuME) > T _p(t-BuMK). Also, either increasing the additive concentration or increasing pK _a of the additive leads to depression of T _p. Time-resolved ¹H NMR spin-spin relaxation experiments (T ₂) performed above the phase separation temperature of PNIPAM revealed high colloidal stability of the phase-separated polymer induced by the additives (relative to the neat PNIPAM/D₂O system). Small quantities of selected suitable additives can be used to optimize the properties of PNIPAM preparations including their phase separation temperatures, colloidal stabilities, and morphologies, thus improving the prospects for the application.

Effect of chain architecture on the swelling and thermal response of star-shaped thermo-responsive (poly(methoxy diethylene glycol acrylate)-block-polystyrene)3 block copolymer films

The effect of chain architecture on the swelling and thermal response of thin films obtained from an amphiphilic three-arm star-shaped thermo-responsive block copolymer poly(methoxy diethylene glycol acrylate)-block-polystyrene ((PMDEGA-b-PS)₃) is investigated by in situ neutron reflectivity (NR) measurements. The PMDEGA and PS blocks are micro-phase separated with randomly distributed PS nanodomains. The (PMDEGA-b-PS)₃ films show a transition temperature (TT) at 33 °C in white light interferometry. The swelling capability of the (PMDEGA-b-PS)₃ films in a D₂O vapor atmosphere is better than that of films from linear PS-b-PMDEGA-b-PS triblock copolymers, which can be attributed to the hydrophilic end groups and limited size of the PS blocks in (PMDEGA-b-PS)₃. However, the swelling kinetics of the as-prepared (PMDEGA-b-PS)₃ films and the response of the swollen film to a temperature change above the TT are significantly slower than that in the PS-b-PMDEGA-b-PS films, which may be related to the conformation restriction by the star-shape. Unlike in the PS-b-PMDEGA-b-PS films, the amount of residual D₂O in the collapsed (PMDEGA-b-PS)₃ films depends on the final temperature. It decreases from (9.7 ± 0.3)% to (7.0 ± 0.3)% or (6.0 ± 0.3)% when the final temperatures are set to 35 °C, 45 °C and 50 °C, respectively. This temperature-dependent reduction of embedded D₂O originates from the hindrance of chain conformation from the star-shaped chain architecture.

Self-assembled polypeptide nanoparticles for intracellular irinotecan delivery

In this research poly(l-lysine)-b-poly(l-leucine) (PLys-b-PLeu) polymersomes were developed. It was shown that the size of nanoparticles depended on pH of self-assembly process and varied from 180 to 650nm. The biodegradation of PLys-b-PLeu nanoparticles was evaluated using in vitro polypeptide hydrolysis in two model enzymatic systems, as well as in human blood plasma. The experiments on the visualization of cellular uptake of rhodamine 6g-loaded and fluorescein-labeled nanoparticles were carried out and the possibility of their penetration into the cells was approved. The cytotoxicity of polymersomes obtained was tested using three cell lines, namely, HEK, NIH-3T3 and A549. It was shown that tested nanoparticles did not demonstrate any cytotoxicity in the concentrations up to 2mg/mL. The encapsulation of specific to colorectal cancer anti-tumor drug irinotecan into developed nanocontainers was performed by means of pH gradient method. The dispersion of drug-loaded polymersomes in PBS was stable at 4°C for a long time (at least 1month) without considerable drug leakage. The kinetics of drug release was thoroughly studied using two model enzymatic systems, human blood serum and PBS solution. The approximation of irinotecan release profiles with different mathematical drug release models was carried out and allowed identification of the release mechanism, as well as the morphological peculiarities of developed particles. The dependence of encapsulation efficiency, as well as maximal loading capacity, on initial drug concentration was studied. The maximal drug loading was found as 320±55μg/mg of polymersomes. In vitro anti-tumoral activity of irinotecan-loaded polymersomes on a colon cancer cell line (Caco-2) was measured and compared to that for free drug.