High-Performance Magnetorheological Suspensions of Pickering-Emulsion-Polymerized Polystyrene/Fe3O4 Particles with Enhanced Stability

Macroscopic Room-Temperature Magnetoelectricity in Piezoelectric (Core)-Ferrimagnetic (Shell) Nanocomposites

The magnetoelectric (ME) effect, which involves the interaction of magnetic and electric fields within a material, has a significant potential for various applications. Our study addresses the limitations of conventional magnetostriction-based ME materials by demonstrating an alternative approach that achieves substantial ME effects in core-shell-type nanocomposites at room temperature. By synthesizing ferrimagnetic Fe3O4 nanoparticles onto piezoelectric poly(vinylidene fluoride) (PVDF) particles, we identified a distinct ME mechanism. In magnetorheological (MR) fluids, the magnetic-field-induced aggregation of Fe3O4 nanoparticles, combined with the piezoelectricity of PVDF, leads to a pronounced ME effect, significantly enhancing the performance and stability of MR fluids. This research highlights a crucial observation of distinct ME effects, which could suggest potential pathways for advancements in practical applications including microfluidics, vibration dampers, tactile technologies, and biomedical and bioengineering fields.

High-Performance Flexible Sensor with Sensitive Strain/Magnetic Dual-Mode Sensing Characteristics Based on Sodium Alginate and Carboxymethyl Cellulose

Flexible sensors can measure various stimuli owing to their exceptional flexibility, stretchability, and electrical properties. However, the integration of multiple stimuli into a single sensor for measurement is challenging. To address this issue, the sensor developed in this study utilizes the natural biopolymers sodium alginate and carboxymethyl cellulose to construct a dual interpenetrating network, This results in a flexible porous sponge that exhibits a dual-modal response to strain and magnetic stimulation. The dual-mode flexible sensor achieved a maximum tensile strength of 429 kPa and elongation at break of 24.7%. It also exhibited rapid response times and reliable stability under both strain and magnetic stimuli. The porous foam sensor is intended for use as a wearable electronic device for monitoring joint movements of the body. It provides a swift and stable sensing response to mechanical stimuli arising from joint activities, such as stretching, compression, and bending. Furthermore, the sensor generates opposing response signals to strain and magnetic stimulation, enabling real-time decoupling of different stimuli. This study employed a simple and environmentally friendly manufacturing method for the dual-modal flexible sensor. Because of its remarkable performance, it has significant potential for application in smart wearable electronics and artificial electroskins.

Stability and dispersibility of microplastics in experimental exposure medium and their dimensional characterization by SMLS, SAXS, Raman microscopy, and SEM

The plastic production that contributes to the global plastic reservoir presents a major challenge for society in managing plastic waste and mitigating the environmental damage of microplastic (MP) pollution. In the environment, the formation of biomolecular corona around MPs enhance the stability of MP suspensions, influencing the bioavailability and toxicity of MPs. Essential physical properties including MP stability, dispersibility, agglomeration, and dimensional size must be precisely defined and measured in complex media taking into account the formation of a protein corona. Using static multiple light scattering (SMLS), small angle X-ray scattering (SAXS), Raman microscopy, and scanning electron microscopy (SEM), we measured the particle size, density, stability, and agglomeration state of polyethylene and polypropylene MPs stabilized in aqueous suspension by BSA. SEM analysis revealed the formation of nanoplastic debris as MP suspensions aged. Our results suggest that protein adsorption favors the formation of secondary nanoplastics, potentially posing an additional threat to ecosystems. This approach provides analytical methodologies by integrating SEM, SMLS, and SAXS, for characterizing MP suspensions and highlights the effect of the protein corona on size measurements of micro/nanoplastics. Our analysis demonstrates the detectability of secondary nanoplastics by SEM, paving the way for monitoring and controlling human exposure.

Non-Settling Super-Strong Magnetorheological Fluids

A magnetorheological (MR) fluid is generally called a suspension in which magnetic particles are dispersed in a non-magnetic medium. When an external magnetic field is applied, a pseudo-phase transition occurs within a short time to generate yield stress, and when the magnetic field is released, it returns to the suspended state. Due to these unique characteristics, it is classified as a smart material to be widely applied in various industries. High performance MR fluids require high yield stress and stability for long-term use. However, it is very difficult to improve performance and stability simultaneously due to the limited amount of magnetic particles in the suspension and particle sedimentation caused by the density mismatch between the suspending particles and the liquid phase. In this study, an MR slurry is developed that is completely different from the MR suspension, starting from the opposite concept. An innovative non-settling (i.e., permanently stable) magnetorheological slurry is successfully created that exhibits unprecedented ultra-high yield stress. This result is expected to be a turning point for applying MR fluids to more diverse industries. In addition, a simple fitting equation expressing the yield stress as a function of the particle volume fraction is proposed.

A thermosensitive Pickering gel emulsion with a high oil-water ratio for long-term X-ray imaging and permanent embolization of arteries

Iodized oil has an excellent X-ray imaging effect, but it shows poor embolization performance. When used as an embolic agent, it is easily washed off by the blood flow and eliminated from the body. Therefore, it is essential to use iodized oil in combination with solid embolic agents such as gelatin sponge or to perform multiple embolization procedures to achieve the therapeutic effect. In the present study, a poly(N-isopropyl acrylamide)-co-acrylic acid (PNCAA) temperature-sensitive nanogel was synthesized by emulsion polymerization; the nanogel was then emulsified with iodized oil to prepare a thermosensitive iodized oil Pickering gel emulsion (TIPE). The oil-water (O/W) ratio of an O/W emulsion system can reach 4 : 6. When injected into the body, TIPE transforms into a nonflowing coagulated state at physiological temperature; the iodized oil is locked in the emulsion structure, thereby achieving local embolization and continuous imaging effects, which not only retain the X-ray imaging effect of the iodized oil but also improve its embolization effect. Subsequently, we further evaluated renal artery embolization in a normal rabbit renal artery model, and the results showed that TIPE shows a long-term conformal embolization performance and excellent long-term X-ray imaging ability.

The mediated rheological properties of emulsions stabilized by thread-like mesoporous silica nanoparticles in combination with CTAB

The combination of hydrophilic particles and surfactants provides a simple method to stabilize Pickering emulsions. The type and concentration of the particles and surfactants play important roles in the microstructure and rheological properties of the resulting emulsions. Herein, stable n-octane-in-water Pickering emulsions with tunable rheological properties were prepared using thread-like mesoporous silica nanoparticles (TMSNPs) and cetyltrimethylammonium bromide (CTAB) as emulsifiers. The CTAB concentration (C_CTAB) highly affected the properties of emulsions, which were divided into three regions according to the results of large-amplitude oscillatory shear responses. In the low C_CTAB range (0.03 mmol L^-1 ≤ C_CTAB ≤ 0.1 mmol L^-1), the emulsions gelled with a high storage modulus . With C_CTAB increasing, the value of emulsions, measured by the small-amplitude oscillatory shear, decreased from approximately 1000 Pa at 0.03 mmol L^-1 to 100 Pa at 0.3 mmol L^-1 and then to 40 Pa at 3 mmol L^-1. A three-dimensional percolation structure formed by cross-linking of TMSNPs in the emulsion continuous phase was observed via cryo-SEM in the low C_CTAB range but not in the intermediate and high C_CTAB ranges. The mechanisms showing the synergistic stability and rheological properties of these emulsions were investigated. It is attributed to the unique morphology of TMSNPs and the competitive adsorption of CTAB molecules at the oil-water interface and on the nanoparticle surface in different C_CTAB ranges. Moreover, owing to the porosity and hydrogen-bonding interactions between the TMSNPs and the confinement effect of the flocculated oil droplets, the viscoelasticity of the emulsions could be mediated by adding a trace amount of acid/base. This study provides a new strategy to regulate the rheological properties of emulsions. It also expands the Pickering emulsion systems with tunable rheological properties.

Stable Magnetorheological Fluids Containing Bidisperse Fillers with Compact/Mesoporous Silica Coatings

A drawback of magnetorheological fluids is low kinetic stability, which severely limits their practical utilization. This paper describes the suppression of sedimentation through a combination of bidispersal and coating techniques. A magnetic, sub-micro additive was fabricated and sequentially coated with organosilanes. The first layer was represented by compact silica, while the outer layer consisted of mesoporous silica, obtained with the oil–water biphase stratification method. The success of the modification technique was evidenced with transmission electron microscopy, scanning electron microscopy/energy-dispersive X-ray spectroscopy and Fourier-transform infrared spectroscopy. The coating exceptionally increased the specific surface area, from 47 m2/g (neat particles) up to 312 m2/g, which when combined with lower density, resulted in remarkable improvement in the sedimentation profile. At this expense, the compact/mesoporous silica slightly diminished the magnetization of the particles, while the magnetorheological performance remained at an acceptable level, as evaluated with a modified version of the Cross model. Sedimentation curves were, for the first time in magnetorheology, modelled via a novel five-parameter equation (S-model) that showed a robust fitting capability. The sub-micro additive prevented the primary carbonyl iron particles from aggregation, which was projected into the improved sedimentation behavior (up to a six-fold reduction in the sedimentation rate). Detailed focus was also given to analyze the implications of the sub-micro additives and their surface texture on the overall behavior of the bidisperse magnetorheological fluids.

Molecular Dynamics Simulations and Experimental Studies of the Microstructure and Mechanical Properties of a Silicone Oil/Functionalized Ionic Liquid-Based Magnetorheological Fluid

Magnetorheological (MR) fluids are smart materials that show enormous potential in vibration control, mechanical engineering, etc. However, the effects of the solid-liquid interface strength and the interaction strength between carrier liquid molecules on the mechanical properties and sedimentation stability of MR fluids have always been unresolved issues. This work presents a new type of MR fluid that has a novel carrier liquid, i.e., silicone oil (SO) mixed with a hydroxyl-functionalized ionic liquid (IL-OH). An all-atomic Fe/SO/IL-OH interface model for studying the relationship between mechanical properties and interface strength and intermolecular interactions is established. On the basis of simulation results and theoretical analyses, the mechanical properties and sedimentation stability of the SO/IL-OH-based MR fluids are thoroughly investigated by experiments. The results show that functional ionic liquids significantly improve the mechanical properties and sedimentation stability of MR fluids. These results are essentially attributed to the stronger solid-liquid interface strength, van der Waals forces, and hydrogen bonds between the silicone oil and the functional ionic liquid. The explicit results not only help elucidate the numerous phenomena involved in the research process for MR fluids at the atomic scale but also provide insightful information on the fabrication of high-performance MR fluids.

Controlled Synthesis of Polymethyl Methacrylate Latex Particles Armored by Fe3O4 via Pickering Emulsion Polymerization and Its Emulsifying Properties

The fabrication of polymethyl methacrylate (PMMA) latexes armored with modified Fe₃O₄ (IO) nanoparticles by Pickering emulsion polymerization was described. Dynamic light scattering analyzed the IO/PMMA latex particle size. Thermogravimetric analysis evaluated the incorporation efficiency (IE) of IO nanoparticles and the surface coverage (Cov) of latex particles. Scanning electron microscopy confirmed the IO nanoparticles loaded on the latex surface. Both the original and dialyzed IO nanoparticles were used as stabilizers to discuss the influence of electrolytes in IO solution on the process of emulsion polymerization. In order to effectively control the IE, Cov, hydrophobic properties, and magnetization of latex particles, the kinds of monomers, pH, and solid content of dialyzed IO on the polymerization process were investigated. In addition, the conversion of monomers, the size, and the number of latex particles were learned deeply so as to reveal the key mechanism of the PMMA polymerization process in the absence of electrolytes. Moreover, IO/PMMA latex particles showed good magnetic properties and emulsifying ability. In view of these results, a simple and efficient method for preparing magnetic hybrid materials by Pickering emulsion polymerization was proposed.

Synergistic Effects of Nonmagnetic Carbon Nanotubes on the Performance and Stability of Magnetorheological Fluids Containing Carbon Nanotube-Co0.4Fe0.4Ni0.2 Nanocomposite Particles

We investigated the magnetorheological (MR) properties of the carbon nanotube (CNT)-Co_0.4Fe_0.4Ni_0.2 composite suspension to find a high-performance MR fluid with excellent stability. The composites were fabricated by chemical reduction of Co_0.4Fe_0.4Ni_0.2 on the surface of amine-functionalized CNTs. A synergistic effect between the high aspect ratio of the CNTs and the strong magnetic polarization of the Co_0.4Fe_0.4Ni_0.2 led to stronger MR performance of the nanocomposite particle suspension. The MR fluid exhibits an unexpected high yield stress value that is 13 times greater than that of a CNT-Fe₃O₄ suspension at a magnetic field strength of 343 kA/m. Nonmagnetic CNTs form a three-dimensional networklike structure, imparting surprisingly large additional yield stress to the CNT-Co_0.4Fe_0.4Ni_0.2 nanocomposite MR suspension. The low density of the CNTs resulted in much better long-term stability for the CNT-Co_0.4Fe_0.4Ni_0.2 nanocomposite suspension than the MR fluid containing only Co_0.4Fe_0.4Ni_0.2.

Enhancing Effect of Fe3O4/Nanolignocelluloses in Magnetorheological Fluid

Magnetorheological fluid (MRF) is an intelligent material, which can be controlled by an external magnetic field. It is widely used in damping, finishing, mechanical transmission, sealing, and other engineering fields due to its magnetorheological (MR) effect. However, despite decades of research and experimental development, the wide application of MRF is still restricted by its serious settlement problem owing to the density difference between the magnetic particles and carrier liquid. Here, using the coprecipitation method, a kind of Fe₃O₄-modified nanolignocellulose (Fe₃O₄/NLC) composite fiber was characterized by its unique advantages such as low density, soft magnetism property, and high specific surface. These Fe₃O₄/NLCs were used as a kind of reinforcing particle with carbonyl iron powder in the new bidisperse MRF system. The performances of MRF samples were enhanced by these superior properties. We found that all MRF samples with composite fibers exhibited excellent antisettlement and dynamic mechanical characteristics and cooperativity between Fe₃O₄ and NLCs. Furthermore, redispersibility of MRF is qualitatively evaluated by a shearing test in this paper, explaining the high property of antihardening. This composite fiber improves the comprehensive performance of MRF and has the potential to be repeatedly used in engineering applications.

Strong and Stable Magnetorheological Fluids Based on Flaky Sendust-Co0.4Fe0.4Ni0.2 Nanocomposite Particles

The magnetorheological (MR) performance of suspensions based on magnetic (flaky Sendust (FS))-magnetic (Co_0.4Fe_0.4Ni_0.2) nanocomposite particles was investigated by using a vibrating sample magnetometer and a rotational rheometer. Flaky Sendust@Co_0.4Fe_0.4Ni_0.2 nanocomposite particles were fabricated through wet chemical synthesis of Co_0.4Fe_0.4Ni_0.2 on the surface of FS. The density of the resultant FS@Co_0.4Fe_0.4Ni_0.2 was less than that of FS due to the pore/void formation in the composite particles. Because of the high saturation magnetization of Co_0.4Fe_0.4Ni_0.2 (165 emu/g), FS@Co_0.4Fe_0.4Ni_0.2 (145 emu/g) exhibited greater magnetization than bare FS (130 emu/g), which resulted in the good performance of FS@Co_0.4Fe_0.4Ni_0.2-based MR fluids: the suspension exhibited a remarkably high yield stress, almost one order greater than that of MR fluids based on hierarchically structured (HS) Fe₃O₄ particles. In addition, the high drag coefficient of FS@Co_0.4Fe_0.4Ni_0.2 in the liquid medium, in conjunction with its lower density, resulted in a substantially improved long-term stability, better than that of Co_0.4Fe_0.4Ni_0.2- or FS-based suspensions. Although the density of the FS@Co_0.4Fe_0.4Ni_0.2 nanoparticles is higher than that of HS-Fe₃O₄ particles, their stability is much better than the stability of HS-Fe₃O₄ particle's suspension. Manufactured magnetic-magnetic nanocomposite particles provide a feasible MR suspension of high MR performance and long-term stability.

Salt-Resistant Switchable Pickering Emulsions Stabilized by Mesoporous Nanosilica Hydrophobized In Situ by pH-Insensitive Surfactants

Novel oil-in-water (O/W) Pickering emulsions (PEs) were prepared using mesoporous nanosilica in combination with a pH-insensitive cationic surfactant as a stabilizer and show an interesting sensitivity to acids and bases. Adding a suitable amount of NaOH (n_NaOH/n_{cationic surfactant} ≥ 1) led to prompt demulsification within 10 s. Upon further adding HCl solutions (n_HCl/n_NaOH = 1), stable PEs re-formed after homogenization. These emulsions remained stable for over 30 days after 60 cycles, switching from stable to unstable and back to stable states, and showed a high salt tolerance. A mechanism for the switching of the Pickering emulsion (PE) to unstable and back to stable states was derived and involved anionic and neutral forms of hydroxyl groups at the mesopores of the mesoporous silica nanoparticles (MSNPs). This work reveals a switchable PE system involving a pH-insensitive surfactant, in which the species of oils and cationic surfactants can be arbitrarily selected, a feature that greatly expands the applicability of PEs.

Magnetic Polymer Composite Particles: Design and Magnetorheology

As a family of smart functional hybrid materials, magnetic polymer composite particles have attracted considerable attention owing to their outstanding magnetism, dispersion stability, and fine biocompatibility. This review covers their magnetorheological properties, namely, flow curve, yield stress, and viscoelastic behavior, along with their synthesis. Preparation methods and characteristics of different types of magnetic composite particles are presented. Apart from the research progress in magnetic polymer composite synthesis, we also discuss prospects of this promising research field.

Static and dynamic behavior of magnetic particles at fluid interfaces

This perspective work reviews the current status of research on magnetic particles at fluid interfaces. The article gives both a unified overview of recent experimental advances and theoretical studies centered on very different phenomena that share a common characteristic: they involve adsorbed magnetic particles that range in size from a few nanometers to several millimeters. Because of their capability of being remotely piloted through controllable external fields, magnetic particles have proven essential as building blocks in the design of new techniques, smart materials and micromachines, with new tunable properties and prospective applications in engineering and biotechnology. Once adsorbed at a fluid-fluid interfase, in a process that can be facilitated via the application of magnetic field gradients, these particles often result sorely confined to two dimensions (2D). In this configuration, inter-particle forces directed along the perpendicular to the interface are typically very small compared to the surface forces. Hence, the confinement and symmetry breaking introduced by the presence of the surface play an important role on the response of the system to the application of an external field. In monolayers of particles where the magnetic is predominant interaction, the states reached are strongly determined by the mode and orientation of the applied field, which promote different patterns and processes. Furthermore, they can reproduce some of the dynamic assemblies displayed in bulk or form new ones, that take advantage of the interfacial phenomena or of the symmetry breaking introduce by the confining boundary. Magnetic colloids are also widely used for unraveling the guiding principles of 2D dynamic self-assembly, in designs devised for producing interface transport, as tiny probes for assessing interfacial rheological properties, neglecting the bulk and inertia contributions, as well as actuated stabilizing agents in foams and emulsions.

Mechanistic Investigation of Surfactant-Free Emulsion Polymerization Using Magnetite Nanoparticles Modified by Citric Acid as Stabilizers

Fe₃O₄-armored latexes were successfully synthesized by using modified Fe₃O₄ (IO) nanoparticles as stabilizers without a surfactant. The particle size, conversion, and particle number density of latex particles during the formation process were studied in detail. The surface charge density and the particle size evolutions of latexes were studied by dynamic light scattering. The use of scanning electron microscopy confirmed that IO nanoparticles were adsorbed on the polymer particle surface. Furthermore, the efficiency of iron oxide incorporation (IE) was evaluated by thermogravimetric analysis. The effect of pH, solid content, and zeta potential of IO nanoparticles on the results of polymerization was also discussed in detail. Attempts were made to explain the change of latex particle surface charge density by using Guy-Chapman-Stern's electric double layer theory. In addition, the effect of ionic strength of ammonium sulfate on particle number density of latex particles was described using P. John Feeney's equation. Finally, the mechanistic insights were discussed by studying polymerization kinetics.

Shape-Controlled Syntheses of Magnetite Microparticles and Their Magnetorheology

Magnetic microspheres in a concentrated suspension can be self-assembled to form chain structures under a magnetic field, resulting in an enhanced viscosity and elasticity of the suspension (i.e., the magnetorheological (MR) effect). Recently, interest has been raised about the relationship between nonspherical particles, such as octahedral particles and the MR effect. However, experimental studies have not made much progress toward clarifying this issue due to the difficulty associated with synthesizing microparticles with well-defined shapes and sizes. Here, we presented a method for the shape-controlled synthesis of magnetite (Fe₃O₄) microparticles and investigated the MR effects of two suspensions prepared from the two shape-controlled samples of Fe₃O₄ microparticles. Our method, which was based on the polyol method, enabled the preparation of spherical and octahedral Fe₃O₄ microparticles with similar sizes and magnetic properties, through a reduction of α-FeOOH in a mixed solvent of ethylene glycol (a polyol) and water. The water played an important role in both the phase transition (α-FeOOH to Fe₃O₄) and the shape control. No substantial difference in the MR effect was observed between an octahedral-particle-based suspension and a spherical-particle-based one. Therefore, in this study, the shape of the microparticles did not strongly influence the MR effect, i.e., the properties of the chain structures.

Searching for a Stable High-Performance Magnetorheological Suspension

Magnetorheological (MR) fluids are a type of smart material with rheological properties that may be controlled through mesostructural transformations. MR fluids form solid-like fibril structures along the magnetic field direction upon application of a magnetic field due to magnetopolarization of soft-magnetic particles when suspended in an inert medium. A reverse structural transition occurs upon removal of the applied field. The structural changes are very fast on the order of milliseconds. The rheological properties of MR fluids vary with the application of a magnetic field, resulting in non-Newtonian viscoplastic flow behaviors. Recent applications have increased the demand for MR materials with better performance and good long-term stability. A variety of industrial MR materials have been developed and tested in numerous experimental and theoretical studies. Because modeling and analysis are essential to optimize material design, a new macroscale structural model has been developed to distinguish between static yield stress and dynamic yield stress and describe the flow behavior over a wide range of shear rates. Herein, this recent progress in the search for advanced MR fluid materials with good stability is described, along with new approaches to MR flow behavior analysis. Several ways to improve the stability and efficiency of the MR fluids are also summarized.

Reversible Actuation Ability upon Light Stimulation of the Smart Systems with Controllably Grafted Graphene Oxide with Poly (Glycidyl Methacrylate) and PDMS Elastomer: Effect of Compatibility and Graphene Oxide Reduction on the Photo-Actuation Performance

This study is focused on the controllable reduction of the graphene oxide (GO) during the surface-initiated atom transfer radical polymerization technique of glycidyl methacrylate (GMA). The successful modification was confirmed using TGA-FTIR analysis and TEM microscopy observation of the polymer shell. The simultaneous reduction of the GO particles was confirmed indirectly via TGA and directly via Raman spectroscopy and electrical conductivity investigations. Enhanced compatibility of the GO-PGMA particles with a polydimethylsiloxane (PDMS) elastomeric matrix was proven using contact angle measurements. Prepared composites were further investigated through the dielectric spectroscopy to provide information about the polymer chain mobility through the activation energy. Dynamic mechanical properties investigation showed an excellent mechanical response on the dynamic stimulation at a broad temperature range. Thermal conductivity evaluation also confirmed the further photo-actuation capability properties at light stimulation of various intensities and proved that composite material consisting of GO-PGMA particles provide systems with a significantly enhanced capability in comparison with neat GO as well as neat PDMS matrix.