50th Anniversary Perspective: There Is a Great Future in Sustainable Polymers

Dual-Porous ZIF-8 Heterogeneous Catalysts with Increased Reaction Sites for Efficient PET Glycolysis

Poly(ethylene terephthalate) (PET) has been widely used for drink bottles, food packing, films, and fibers, resulting in millions of tons of waste PET. Less than 10% of that waste is recycled, and the rest is discarded or incinerated. Waste PET upcycling employs chemical recycling and particularly glycolysis to create the bis(2-hydroxyethyl) terephthalate (BHET) monomer. Herein, we report a dual-porous zeolitic imidazolate framework-8 nanoparticle (DPZIF-8) heterogeneous catalyst for efficient PET glycolysis. The DPZIF-8 nanoparticles were prepared using a triethylamine modulator, which can control the nucleation and growth mechanisms of the ZIF-8 nanoparticles. The DPZIF-8 nanoparticles include both intrinsic micropores and particle-particle adhesion-induced mesopores that can provide a larger external surface area of the zinc sites in the ZIF-8 architecture. The PET glycolysis catalyzed by DPZIF-8 at 180 °C and 1 atm for 4 h shows a PET conversion of 91.7% and a BHET yield of 76.1%, the latter particularly being much higher than with a traditional heterogeneous ZIF-8 catalyst. This dual-porous structure rational design strategy can be versatile for other metal-organic frameworks (MOFs) to increase the interfacial catalytic reaction sites between the metal-organic framework and the polymer, enhancing the PET depolymerization performance and efficiency.

Closed-loop recyclable polymers: from monomer and polymer design to the polymerization-depolymerization cycle

The extensive utilization of plastic, as a symbol of modern technological society, has consumed enormous amounts of finite and non-renewable fossil resources and produced huge amounts of plastic wastes in the land or ocean, and thus recycling and reuse of the plastic wastes have great ecological and economic benefits. Closed-loop recyclable polymers with inherent recyclability can be readily depolymerized into monomers with high selectivity and purity and repolymerized into polymers with the same performance. They are deemed to be the next generation of recyclable polymers and have captured great and increasing attention from academia and industry. Herein, we provide an overview of readily closed-loop recyclable polymers based on monomer and polymer design and no-other-reactant-involved reversible ring-opening and addition polymerization reactions. The state-of-the-art of circular polymers is separately summarized and discussed based on different monomers, including lactones, thiolactones, cyclic carbonates, hindered olefins, cycloolefins, thermally labile olefin comonomers, cyclic disulfides, cyclic (dithio) acetals, lactams, Diels-Alder addition monomers, Michael addition monomers, anhydride-secondary amide monomers, and cyclic anhydride-aldehyde monomers, and polymers with activatable end groups. The polymerization and depolymerization mechanisms are clearly disclosed, and the evolution of the monomer structure, the polymerization and depolymerization conditions, the corresponding polymerization yield, molecular weight, performance of the polymers, monomer recovery, and depolymerization equipment are also systematically summarized and discussed. Furthermore, the challenges and future prospects are also highlighted.

Aluminium complexes of phenoxy-azo ligands in the catalysis of rac-lactide polymerisation

Fourteen new phenoxy-azo aluminium complexes comprising two series, namely, dimethyl{phenoxy-azo}aluminium complexes 1a-7a and monomethyl{phenoxy-azo}aluminium complexes 1b-7b, were successfully synthesised and characterised. The molecular structure of complex 4a, determined using X-ray diffraction analysis, displayed a distorted tetrahedral geometry. The 1H NMR spectrum of complex 5b revealed fluxional behaviour caused by isomeric transformation that occurs in the solution at room temperature. The activation parameters determined by lineshape analysis of variable-temperature 1H NMR spectra in toluene-d8 are as follows: ΔH‡ = 70.05 ± 1.19 kJ mol-1, ΔS‡ = 21.78 ± 3.58 J mol-1 K-1 and ΔG‡ (298 K) = 63.56 ± 0.11 kJ mol-1. All aluminium complexes are active initiators for the ring-opening polymerisation of rac-lactide, and the polymerisations proceeded in a controlled manner and were living. In comparison, the catalytic activity of the dimethyl{phenoxy-azo}aluminium complexes was insignificantly different from that of the corresponding monomethyl{phenoxy-azo}aluminium complexes. The steric factor of the ortho-phenoxy substituent was observed to exert a decelerating effect on the catalytic rate. Kinetic investigations revealed first-order dependency on both monomer and initiator concentrations. Comparative catalytic investigations conducted on phenoxy-azo aluminium and phenoxy-imine aluminium complexes revealed that the former complexes exhibited lower catalytic activity.

Dilatational-plasticity opens a new mechanistic pathway for macromolecular transport across glassy interfaces

Interdiffusion-based macromolecular transport across glassy interfaces is reportedly achieved at high temperatures in accordance with the classical model of reptation. Here, for the first time, we report a new mechanistic pathway for achieving solid-state glassy joining by triggering rapid macromolecular acceleration through mechanical deformation. Large-scale molecular simulations reveal that active plastic deformation in glassy polymers, at temperatures well below the bulk (and surface) glass transition temperatures T g b (and T g s ), causes segmental translations of macromolecules leading to interfacial interpenetrations, and the formation of new entanglements. The mechanistic basis for this new type of bonding is identified as molecular-scale dilatations and densifications during deformation-induced mobility. The reported insights open promising avenues for achieving quick, strong, and energetically less-intensive joining of polymeric glasses across various sectors.

Leveraging Electron Push-Pull Effect for Catalytic Polymerization and Degradation of a Cyclobutane Monomer System

Ring-opening polymerization (ROP) offers a striking solution to solve problems encountered in step-growth condensation polymerization, including precise control over molecular weight, molecular weight distribution, and topology. This has inspired our interest in ROP of cycloalkanes with an ultimate goal to rethink polyolefins, which clearly poses a number of challenges. Practicality of ROP of cycloalkanes is actually limited by their low polymerizability and elusive mechanisms which arise from significantly varied ring size and non-polar C-C bonds in monomers. In this work, by using Lewis acid/Brønsted base/C(sp3)-H initiator system previously developed in our laboratory, we focus on cyclobutanes and explore the positional and electronic effects of substituents on the ring, namely electron push-pull effect, in promoting controlled polymerization to afford densely functionalized poly(cyclobutanes), as well as catalytic degradation of obtained polymers for upcycling. More importantly, experiments and DFT calculations unveil considerable population of Lewis-acid-induced thermostabilized 1,4-zwitterions, which distinguish cyclobutanes from cyclopropanes and others. All these findings would shed light on catalytic synthesis and degradation of saturated all-carbon main-chain polymers, as well as small molecule transformations of cyclobutanes.

Sustainable Plastics with High Performance and Convenient Processibility

Designing and making sustainable plastics is especially urgent to reduce their ecological and environmental impacts. However, it remains challenging to construct plastics with simultaneous high sustainability and outstanding comprehensive performance. Here, a composite strategy of in situ polymerizing a petroleum-based monomer with the presence of an industrialized bio-derived polymer in a quasi-solvent-free system is introduced, affording the plastic with excellent mechanical robustness, impressive thermal and solvent stability, as well as low energy, consumes during production, processing, and recycling. Particularly, the plastic can be easily processed into diverse shapes through 3D printing, injection molding, etc. during polymerization and further reprocessed into other complex structures via eco-friendly hydrosetting. In addition, the plastic is mechanically robust with Young's modulus of up to 3.7 GPa and tensile breaking strength of up to 150.2 MPa, superior to many commercially available plastics and other sustainable plastics. It is revealed that hierarchical hydrogen bonds in plastic predominate the well-balanced sustainability and performance. This work provides a new path for fabricating high-performance sustainable plastic toward practical applications, contributing to the circular economy.

Michael Addition-Elimination Ring-Opening Polymerization

A cyclic thioenone system capable of controlled ring-opening polymerization (ROP) is presented that leverages a reversible Michael addition-elimination (MAE) mechanism. The cyclic thioenone monomers are easy to access and modify and for the first time incorporate the dynamic reversibility of MAE with chain-growth polymerization. This strategy features mild polymerization conditions, tunable functionalities, controlled molecular weights (Mn), and narrow dispersities. The obtained polythioenones exhibit excellent optical transparency and good mechanical properties and can be depolymerized to recover the original monomers. Density functional theory (DFT) calculations of model reactions offer insights into the role of monomer conformation in the polymerization process, as well as explaining divergent reactivity observed in seven-membered thiepane (TP) and eight-membered thiocane (TC) ring systems. Collectively, these findings demonstrate the feasibility of MAE mechanisms in ring-opening polymerization and provide important guidelines toward future monomer designs.

Polyurethane degradation by extracellular urethanase producing bacterial isolate Moraxella catarrhalis strain BMPPS3

Plastic waste has become a global issue and a threat to the ecosystem. The present study isolated polyurethane (PU) degrading bacterial species from soil dumped with plastic wastes. Four bacterial isolates, RS1, RS6, RS9 and RS13 were obtained and their ability to degrade PU in a synthetic medium with PU as a sole source of carbon was assessed individually. After thirty days of incubation, the highest PU weight loss of 67.36 ± 0.32% was recorded in the medium containing RS13 isolate. The results of FTIR revealed the occurrence of carbonyl peaks. The putative isolate RS13 confirmed with the genus Moraxella according to 16S rRNA gene sequencing and the isolate was specified as Moraxella catarrhalis strain BMPPS3. The restriction analysis of Moraxella catarrhalis strain BMPPS3 revealed that the GCAT content to 51% and 49% correspondingly. Moraxella catarrhalis strain BMPPS3 was able to colonize on PU surface and form a biofilm as revealed by SEM investigation. Fatty acids and alkanes were found to be the degradation products by GC-MS analysis. The presence of these metabolites facilitated the growth of strain RS13 and suggested that ester hydrolysis products had been mineralized into CO2 and H2O. Extracellular biosurfactant synthesis has also been found in Moraxella catarrhalis strain BMPPS13 inoculated with synthetic media and mineral salt media containing PU and glucose as carbon sources, respectively with a significant level of cell-surface hydrophobicity (32%). The production and activity of extracellular esterase showed consistent increase from day 1-15 which peaked (1.029 mM/min/mg) on day 24 significantly at P < 0.001. Crude biosurfactants were lipopeptide-based, according to the characteristic investigation. According to this study findings, Moraxella catarrhalis produces biosurfactants of the esterase, urethanase and lipase (lipopeptide) types when carbon source PU is present.

Hybrid Bonding Bottlebrush Polymers Grafted from a Supramolecular Polymer Backbone

Bottlebrush polymers, macromolecules consisting of dense polymer side chains grafted from a central polymer backbone, have unique properties resulting from this well-defined molecular architecture. With the advent of controlled radical polymerization techniques, access to these architectures has become more readily available. However, synthetic challenges remain, including the need for intermediate purification, the use of toxic solvents, and challenges with achieving long bottlebrush architectures due to backbone entanglements. Herein, we report hybrid bonding bottlebrush polymers (systems integrating covalent and noncovalent bonding of structural units) consisting of poly(sodium 4-styrenesulfonate) (p(NaSS)) brushes grafted from a peptide amphiphile (PA) supramolecular polymer backbone. This was achieved using photoinitiated electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization in water. The structure of the hybrid bonding bottlebrush architecture was characterized using cryogenic transmission electron microscopy, and its properties were probed using rheological measurements. We observed that hybrid bonding bottlebrush polymers were able to organize into block architectures containing domains with high brush grafting density and others with no observable brushes. This finding is possibly a result of dynamic behavior unique to supramolecular polymer backbones, enabling molecular exchange or translational diffusion of monomers along the length of the assemblies. The hybrid bottlebrush polymers exhibited higher solution viscosity at moderate shear, protected supramolecular polymer backbones from disassembly at high shear, and supported self-healing capabilities, depending on grafting densities. Our results demonstrate an opportunity for novel properties in easily synthesized bottlebrush polymer architectures built with supramolecular polymers that might be useful in biomedical applications or for aqueous lubrication.

Dynamic Covalent Chemistry of Enamine-Ones: Exploring Tunable Reactivity in Vitrimeric Polymers and Covalent Organic Frameworks

Dynamic covalent chemistry (DCC) has revolutionized the field of polymer science by offering new opportunities for the synthesis, processability, and recyclability of polymers as well as in the development of new materials with interesting properties such as vitrimers and covalent organic frameworks (COFs). Many DCC linkages have been explored for this purpose, but recently, enamine-ones have proven to be promising dynamic linkages because of their facile reversible transamination reactions under thermodynamic control. Their high stability, stimuli-responsive properties, and tunable kinetics make them promising dynamic cross-linkers in network polymers. Given the rapid developments in the field in recent years, this review provides a critical and up-to-date overview of recent developments in enamine-one chemistry, including factors that control their dynamics. The focus of the review will be on the utility of enamine-ones in designing a variety of processable and self-healable polymers with important applications in vitrimers and recyclable closed-loop polymers. The use of enamine-one linkages in crystalline polymers, known as COFs and their applications are also summarized. Finally, we provide an outlook for future developments in this field.

Thermally Stable and Chemically Recyclable Poly(ketal-ester)s Regulated by Floor Temperature

Chemical recycling to monomers (CRM) offers a promising closed-loop approach to transition from current linear plastic economy toward a more sustainable circular paradigm. Typically, this approach has focused on modulating the ceiling temperature (Tc) of monomers. Despite considerable advancements, polymers with low Tc often face challenges such as inadequate thermal stability, exemplified by poly(γ-butyrolactone) (PGBL) with a decomposition temperature of ∼200 °C. In contrast, floor temperature (Tf)-regulated polymers, particularly those synthesized via the ring-opening polymerization (ROP) of macrolactones, inherently exhibit enhanced thermodynamic stability as the temperature increases. However, the development of those Tf regulated chemically recyclable polymers remains relatively underexplored. In this context, by judicious design and efficient synthesis of a biobased macrocyclic diester monomer (HOD), we developed a type of Tf -regulated closed-loop chemically recyclable poly(ketal-ester) (PHOD). First, the entropy-driven ROP of HOD generated high-molar mass PHOD with exceptional thermal stability with a Td,5% reaching up to 353 °C. Notably, it maintains a high Td,5% of 345 °C even without removing the polymerization catalyst. This contrasts markedly with PGBL, which spontaneously depolymerizes back to the monomer above its Tc in the presence of catalyst. Second, PHOD displays outstanding closed-loop chemical recyclability at room temperature within just 1 min with tBuOK. Finally, copolymerization of pentadecanolide (PDL) with HOD generated high-performance copolymers (PHOD-co-PPDL) with tunable mechanical properties and chemical recyclability of both components.

Impact of Sacrificial Hydrogen Bonds on the Structure and Properties of Rubber Materials: Insights from All-Atom Molecular Dynamics Simulations

The inclusion of sacrificial hydrogen bonds is crucial for advancing high-performance rubber materials. However, the molecular mechanisms governing the impact of these bonds on material properties remain unclear, hindering progress in advanced rubber material research. This study employed all-atom molecular dynamics simulations to thoroughly investigate how hydrogen bonds affect the structure, dynamics, mechanics, and linear viscoelasticity of rubber materials. As the modified repeating unit ratio (β) increased, both interchain and intrachain hydrogen bond content rose, with interchain bonds playing a predominant role. This physical cross-linking network formed through interchain hydrogen bonds restricts molecular chain movement and relaxation and raises the glass transition temperature of rubber. Within a certain content of hydrogen bonds, the mechanical strength increases with increasing β. However, further increasing β leads to a subsequent decrease in the mechanical performance. Optimal mechanical properties were observed at β = 6%. On the other hand, a higher β value yields an elevated stress relaxation modulus and an extended stress relaxation plateau, signifying a more complex hydrogen-bond cross-linking network. Additionally, higher β increases the storage modulus, loss modulus, and complex viscosity while reducing the loss factor. In summary, this study successfully established the relationship between the structure and properties of natural rubber containing hydrogen bonds, providing a scientific foundation for the design of high-performance rubber materials.

Upcycling of Carbon Fiber/Thermoset Composites into High-Performance Elastomers and Repurposed Carbon Fibers

Recycling of carbon fiber-reinforced polymer composites (CFRCs) based on thermosetting plastics is difficult. In the present study, high-performance CFRCs are fabricated through complexation of aromatic pinacol-cross-linked polyurethane (PU-AP) thermosets with carbon fiber (CF) cloths. PU-AP thermosets exhibit a breaking strength of 95.5 MPa and toughness of 473.6 MJ m-3 and contain abundant hydrogen-bonding groups, which can have strong adhesion with CFs. Because of the high interfacial adhesion between CF cloths and PU-AP thermosets and high toughness of PU-AP thermosets, CF/PU-AP composites possess a high tensile strength of >870 MPa. Upon heating in N,N-dimethylacetamide (DMAc) at 100 °C, the aromatic pinacols in the CF/PU-AP composites can be cleaved, generating non-destructive CF cloths and linear polymers that can be converted to high-performance elastomers. The elastomers are mechanically robust, healable, reprocessable, and damage-resistant with an extremely high tensile strength of 74.2 MPa and fracture energy of 149.6 kJ m-2. As a result, dissociation of CF/PU-AP composites enables the recovery of reusable CF cloths and high-performance elastomers, thus realizing the upcycling of CF/PU-AP composites.

Enabling Closed-Loop Circularity of "Non-Polymerizable" α, β-Conjugated Lactone Towards High-Performance Polyester with the Assistance of Cyclopentadiene

Chemical recycling of polymers to monomers presents a promising solution to the escalating crisis associated with plastic waste. Despite considerable progress made in this field, the primary efforts have been focused on redesigning new monomers to produce readily recyclable polymers. In contrast, limited research into the potential of seemingly "non-polymerizable" monomers has been conducted. Herein, we propose a paradigm that leverages a "chaperone"-assisted strategy to establish closed-loop circularity for a "non-polymerizable" α, β-conjugated lactone, 5,6-dihydro-2H-pyran-2-one (DPO). The resulting PDPO, a structural analogue of poly(δ-valerolactone) (PVL), exhibits enhanced thermal properties with a melting point (Tm) of 114 °C and a decomposition temperature (Td,5%) of 305 °C. Notably, owing to the structural similarity between DPO and δ-VL, the copolymerization generates semi-crystalline P(DPO-co-VL)s irrespective of the DPO incorporation ratio. Intriguingly, the inherent C=C bonds in P(DPO-co-VL)s enable their convenient post-functionalization via Michael-addition reaction. Lastly, PDPO was demonstrated to be chemically recyclable via ring-closing metathesis (RCM), representing a significant step towards the pursuit of enabling the closed-loop circularity of "non-polymerizable" lactones without altering the ultimate polymer structure.

Chemically Recyclable, High Molar Mass Polyoxazolidinones via Ring-Opening Metathesis Polymerization

The development of robust methods for the synthesis of chemically recyclable polymers with tunable properties is necessary for the design of next-generation materials. Polyoxazolidinones (POxa), polymers with five-membered urethanes in their backbones, are an attractive target because they are strongly polar and have high thermal stability, but existing step-growth syntheses limit molar masses and methods to chemically recycle POxa to monomer are rare. Herein, we report the synthesis of high molar mass POxa via ring-opening metathesis polymerization of oxazolidinone-fused cyclooctenes. These novel polymers show <5% mass loss up to 382-411 °C and have tunable glass transition temperatures (14-48 °C) controlled by the side chain structure. We demonstrate facile chemical recycling to monomer and repolymerization despite moderately high monomer ring-strain energies, which we hypothesize are facilitated by the conformational restriction introduced by the fused oxazolidinone ring. This method represents the first chain growth synthesis of POxa and provides a versatile platform for the study and application of this emerging subclass of polyurethanes.

Controlled Carbon Dioxide Terpolymerizations to Deliver Toughened yet Recyclable Thermoplastics

Using CO2 polycarbonates as engineering thermoplastics has been limited by their mechanical performances, particularly their brittleness. Poly(cyclohexene carbonate) (PCHC) has a high tensile strength (40 MPa) but is very brittle (elongation at break <3%), which limits both its processing and applications. Here, well-defined, high molar mass CO2 terpolymers are prepared from cyclohexene oxide (CHO), cyclopentene oxide (CPO), and CO2 by using a Zn(II)Mg(II) catalyst. In the catalysis, CHO and CPO show reactivity ratios of 1.53 and 0.08 with CO2, respectively; as such, the terpolymers have gradient structures. The poly(cyclohexene carbonate)-grad-poly(cyclopentene carbonate) (PCHC-grad-PCPC) have high molar masses (86 < Mn < 164 kg mol-1, ĐM < 1.22) and good thermal stability (Td > 250 °C). All the polymers are amorphous with a single, high glass transition temperature (96 < Tg < 108 °C). The polymer entanglement molar masses, determined using dynamic mechanical analyses, range from 4 < Me < 23 kg mol-1 depending on the polymer composition (PCHC:PCPC). These polymers show superior mechanical performance to PCHC; specifically the lead material (PCHC0.28-grad-PCPC0.72) shows 25% greater tensile strength and 160% higher tensile toughness. These new plastics are recycled, using cycles of reprocessing by compression molding (150 °C, 1.2 ton m-2, 60 min), four times without any loss in mechanical properties. They are also efficiently chemically recycled to selectively yield the two epoxide monomers, CHO and CPO, as well as carbon dioxide, with high activity (TOF = 270-1653 h-1, 140 °C, 120 min). The isolated recycled monomers are repolymerized to form thermoplastic showing the same material properties. The findings highlight the benefits of the terpolymer strategy to deliver thermoplastics combining the beneficial low entanglement molar mass, high glass transition temperatures, and tensile strengths; PCHC properties are significantly improved by incorporating small quantities (23 mol %) of cyclopentene carbonate linkages. The general strategy of designing terpolymers to include chain segments of low entanglement molar mass may help to toughen other brittle and renewably sourced plastics.

Bulk Free Radical Terpolymerization of Butyl Acrylate, 2-Methylene-1,3-Dioxepane and Vinyl Acetate: Terpolymer Reactivity Ratio Estimation

This investigation introduces the first estimation of ternary reactivity ratios for a butyl acrylate (BA), 2-methylene-1,3-dioxepane (MDO), and vinyl acetate (VAc) system at 50 °C, with an aim to develop biodegradable pressure-sensitive adhesives (PSAs). In this study, we applied the error-in-variables model (EVM) to estimate reactivity ratios. The ternary reactivity ratios were found to be r12 = 0.417, r21 = 0.071, r13 = 4.459, r31 = 0.198, r23 = 0.260, and r32 = 55.339 (BA/MDO/VAc 1/2/3), contrasting with their binary counterparts, which are significantly different, indicating the critical need for ternary system analysis to accurately model multicomponent polymerization systems. Through the application of a recast Alfrey-Goldfinger model, this investigation predicts the terpolymer's instantaneous and cumulative compositions at various conversion levels, based on the ternary reactivity ratios. These predictions not only provide crucial insights into the incorporation of MDO across different initial feed compositions but also offer estimates of the final terpolymer compositions and distributions, underscoring their potential in designing compostable or degradable polymers.

Do medical devices contribute to sustainability? The role of innovative polymers and device design

Sustainability of a medical device has not yet become a major issue in public discussions compared to other topics with impact to material performance, clinical application, production economy and environmental pollution. Due to their unique properties, polymers (plastics) allow for multiple, flexible applications in medical device technology. Polymers are part of the majority of disposable and single use medical device and contribute with 3% to the worldwide production of plastics. The global medical polymer market size was valued 19.9 billion US-$ in 2022 and its value projection for 2023 is expected to reach 43.03 billion US-$ Here, a wider concept of related sustainability is introduced for medical devices and their polymer components. A close look on medical device specification reveals that additional properties are required to provide sustainability, such as biodegradability, quality by device design (QbD), as well as an inbuild performance service for patients, healthcare professionals and healthcare providers. The increasing global numbers for chronic and non-communicable diseases require a huge demand for single use medical devices. A careful look at polymer specification and its performance properties is needed, including possible chemical modifications and degradation processes during waste disposal. Bioengineers in charge of design and production of medical devices will only be successful when they apply a holistic and interdisciplinary approach to medical device sustainability.

Novel green-based polyglycerol polymeric nanoparticles loaded with ferulic acid: A promising approach for hepatoprotection

In the pursuit of eco-friendly and sustainable materials, polyglycerol diacid polymers hold immense promise for drug delivery compared to those derived from fossil fuels. Harnessing this potential, we aimed to prepare nanoparticles (NPs) derived from sustainable polymers, loaded with ferulic acid (FA), a natural polyphenolic compound known for its shielding effect against liver-damaging agents, including carbon tetrachloride (CCl4). Glycerol was esterified with renewable monomers, such as succinic acid, adipic acid, and/or FA, resulting in the creation of a novel class of polyglycerol diacid polymers. Characterization via Fourier-transform infrared spectroscopy and nuclear magnetic resonance confirmed the successful synthesis of these polymers with <7 % residual monomers. FA-loaded NPs were fabricated using the newly synthesized polymers. To further augment their potential, the NPs were coated with chitosan. The chitosan-coated NPs boasted an optimal PS of 290 ± 5.03 nm, showing superior physical stability, and a commendable EE% of 58.79 ± 0.43%w/v. The cytotoxicity was examined on fibroblast cells using the SRB assay. In-vivo experiments employing a CCl4-induced liver injury model yielded compelling evidence of the heightened hepatoprotective effects conferred by chitosan-coated particles. This demonstrates the benefits of incorporating sustainable polymers into innovative composites for efficient drug delivery, indicating their potential for creating versatile platforms for various therapeutic applications.

High Molar Mass Polycarbonates as Closed-Loop Recyclable Thermoplastics

Using carbon dioxide (CO2) to make recyclable thermoplastics could reduce greenhouse gas emissions associated with polymer manufacturing. CO2/cyclic epoxide ring-opening copolymerization (ROCOP) allows for >30 wt % of the polycarbonate to derive from CO2; so far, the field has largely focused on oligocarbonates. In contrast, efficient catalysts for high molar mass polycarbonates are underinvestigated, and the resulting thermoplastic structure-property relationships, processing, and recycling need to be elucidated. This work describes a new organometallic Mg(II)Co(II) catalyst that combines high productivity, low loading tolerance, and the highest polymerization control to yield polycarbonates with number average molecular weight (Mn) values from 4 to 130 kg mol-1, with narrow, monomodal distributions. It is used in the ROCOP of CO2 with bicyclic epoxides to produce a series of samples, each with Mn > 100 kg mol-1, of poly(cyclohexene carbonate) (PCHC), poly(vinyl-cyclohexene carbonate) (PvCHC), poly(ethyl-cyclohexene carbonate) (PeCHC, by hydrogenation of PvCHC), and poly(cyclopentene carbonate) (PCPC). All these materials are amorphous thermoplastics, with high glass transition temperatures (85 < Tg < 126 °C, by differential scanning calorimetry) and high thermal stability (Td > 260 °C). The cyclic ring substituents mediate the materials' chain entanglements, viscosity, and glass transition temperatures. Specifically, PCPC was found to have 10× lower entanglement molecular weight (Me)n and 100× lower zero-shear viscosity compared to those of PCHC, showing potential as a future thermoplastic. All these high molecular weight polymers are fully recyclable, either by reprocessing or by using the Mg(II)Co(II) catalyst for highly selective depolymerizations to epoxides and CO2. PCPC shows the fastest depolymerization rates, achieving an activity of 2500 h-1 and >99% selectivity for cyclopentene oxide and CO2.

Chemical recycling of bromine-terminated polymers synthesized by ATRP

Chemical recycling of polymers is one of the biggest challenges in materials science. Recently, remarkable achievements have been made by utilizing polymers prepared by controlled radical polymerization to trigger low-temperature depolymerization. However, in the case of atom transfer radical polymerization (ATRP), depolymerization has nearly exclusively focused on chlorine-terminated polymers, even though the overwhelming majority of polymeric materials synthesized with this method possess a bromine end-group. Herein, we report an efficient depolymerization strategy for bromine-terminated polymethacrylates which employs an inexpensive and environmentally friendly iron catalyst (FeBr2/L). The effect of various solvents and the concentration of metal salt and ligand on the depolymerization are judiciously explored and optimized, allowing for a depolymerization efficiency of up to 86% to be achieved in just 3 minutes. Notably, the versatility of this depolymerization is exemplified by its compatibility with chlorinated and non-chlorinated solvents, and both Fe(ii) and Fe(iii) salts. This work significantly expands the scope of ATRP materials compatible with depolymerization and creates many future opportunities in applications where the depolymerization of bromine-terminated polymers is desired.

Depolymerization within a Circular Plastics System

The societal importance of plastics contrasts with the carelessness with which they are disposed. Their superlative properties lead to economic and environmental efficiency, but the linearity of plastics puts the climate, human health, and global ecosystems at risk. Recycling is fundamental to transitioning this linear model into a more sustainable, circular economy. Among recycling technologies, chemical depolymerization offers a route to virgin quality recycled plastics, especially when valorizing complex waste streams poorly served by mechanical methods. However, chemical depolymerization exists in a complex and interlinked system of end-of-life fates, with the complementarity of each approach key to environmental, economic, and societal sustainability. This review explores the recent progress made into the depolymerization of five commercial polymers: poly(ethylene terephthalate), polycarbonates, polyamides, aliphatic polyesters, and polyurethanes. Attention is paid not only to the catalytic technologies used to enhance depolymerization efficiencies but also to the interrelationship with other recycling technologies and to the systemic constraints imposed by a global economy. Novel polymers, designed for chemical depolymerization, are also concisely reviewed in terms of their underlying chemistry and potential for integration with current plastic systems.

Quantitative, Regiospecific, and Stereoselective Radical Ring-Opening Polymerization of Monosaccharide Cyclic Ketene Acetals

Cyclic ketene acetals (CKAs) are among the most well-studied monomers for radical ring-opening polymerization (rROP). However, ring-retaining side reactions and low reactivities in homopolymerization and copolymerization remain significant challenges for the existing CKAs. Here, we report that a class of monosaccharide CKAs can be facilely prepared from a short and scalable synthetic route and can undergo quantitative, regiospecific, and stereoselective rROP. NMR analyses and degradation experiments revealed a reaction mechanism involving a propagating radical at the C2 position of pyranose with different monosaccharides exhibiting distinct stereoselectivity in the radical addition of the monomer. Furthermore, the addition of maleimide was found to improve the incorporation efficiency of monosaccharide CKA in the copolymerization with vinyl monomers and produced unique degradable terpolymers with carbohydrate motifs in the polymer backbone.

Poly(ethylene succinate-co-lactic acid) as a Multifunctional Additive for Modulating the Miscibility, Crystallization, and Mechanical Properties of Poly(lactic acid)

Polymer blending offers an effective and economical approach to overcome the performance limitations of poly(lactic acid) (PLA). In this study, a series of copolymers poly(ethylene succinate-co-lactic acid) (PESL) were synthesized, featuring lactic acid (LA) contents that ranged from 20 to 86 wt %. This synthesis involved a one-pot industrial melt polycondensation process using succinic acid (SA), ethylene glycol (EG), and LA, catalyzed by titanium tetraisopropoxide (TTP). The goal was to produce a fully biobased copolymer expected to exhibit partial miscibility with pure poly(lactic acid) (PLA). To assess the capability of PESL copolymers in toughening PLA, we conducted tensile testing on PLA/PESL blends containing 15 wt % PESL. As a result, an elongation at break for the blends with 15 wt % loading of the copolymer PESL72 was directly enhanced to 250% with an ultimate strength of 35 MPa, compared to brittle PLA with less 10% tensile length. The morphological features of interfacial adhesion before and after tensile failure were measured by scanning electron microscopy (SEM). A significant enhancement in the chain mobility of the PLA/PESL blends was further evidenced by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). These findings hold promise for the development of functional packaging materials based on PLA. The proposed copolymer design, which boasts strong industrial feasibility, can serve as a valuable guide for enhancing the toughness of PLA.

Polyurethane with β-Selenocarbonyl Structure Enabling the Combination of Plastic Degradation and Waste Upcycling

Degradable polymers offer a promising solution to mitigate global plastic pollution, but the degraded products often suffer from diminished value. Upcycling is a more sustainable approach to upgrade polymer waste into value-added products. Herein, we report a β-selenocarbonyl-containing polyurethane (SePU), which can be directly degraded under mild conditions into valuable selenium fertilizers for selenium-rich vegetable cultivation globally, enabling both plastic degradation and waste upcycling. Under oxidation condition, this polymer can be easily and selectively degraded via selenoxide elimination reaction from mixed plastic waste. The degraded product can serve as effective selenium fertilizers to increase selenium content in radish and pak choi. The SePU exhibits excellent mechanical properties. Additionally, we observed the formation of spherulites-like selenium particles within the materials during degradation for the first time. Our research offers a successful application of selenoxide elimination reaction in the field of plastic degradation for the first time, endowing plastics with both degradability and high reusable value. This strategy provides a promising solution to reduce pollution and improve economy and sustainability of plastics.

Designing a circular carbon and plastics economy for a sustainable future

The linear production and consumption of plastics today is unsustainable. It creates large amounts of unnecessary and mismanaged waste, pollution and carbon dioxide emissions, undermining global climate targets and the Sustainable Development Goals. This Perspective provides an integrated technological, economic and legal view on how to deliver a circular carbon and plastics economy that minimizes carbon dioxide emissions. Different pathways that maximize recirculation of carbon (dioxide) between plastics waste and feedstocks are outlined, including mechanical, chemical and biological recycling, and those involving the use of biomass and carbon dioxide. Four future scenarios are described, only one of which achieves sufficient greenhouse gas savings in line with global climate targets. Such a bold system change requires 50% reduction in future plastic demand, complete phase-out of fossil-derived plastics, 95% recycling rates of retrievable plastics and use of renewable energy. It is hard to overstate the challenge of achieving this goal. We therefore present a roadmap outlining the scale and timing of the economic and legal interventions that could possibly support this. Assessing the service lifespan and recoverability of plastic products, along with considerations of sufficiency and smart design, can moreover provide design principles to guide future manufacturing, use and disposal of plastics.

Remarkably enhanced stereocomplex crystallization of high-molar-mass enantiomeric polylactide blends by adding double-grafted copolymers

Stereocomplex (SC) crystallization can prominently improve the physico-chemical properties of poly(l-lactide)/poly(d-lactide) (PLLA/PDLA) blends, yielding a novel polylactide (PLA) material. However, the predominant formation of SC crystals in the melt-processing of high-molar-mass (high-MW, >100 kg/mol) enantiomeric PLA blends remains a huge challenge due to the competition between SC crystallization and homocrystallization. Herein, double-grafted copolymer having both PLLA and PDLA side chain has been designed and synthesized as an efficient crystallization promoter for the harvest of SC crystals in the high-MW PLLA/PDLA blends. The results show that, with the addition of such a copolymer, the blends can preferentially crystallize into SC crystals in both isothermal and non-isothermal conditions. Promisingly, the SC crystals can be exclusively formed by adding only small amounts (e.g., 0.5 wt%) of the copolymer, without the formation of any homocrystals. This interesting observation can be interpreted by the crucial role of the unique copolymer in suppressing the phase separation of the opposite PLA enantiomers upon melting as an efficient compatibilizer and then encouraging the generation of alternatingly arranged PLLA/PDLA chain clusters favored for SC nucleation and crystal growth. These findings provide new inspiration for the development of high-performance PLA with desirable SC crystallizability.

Ring Opening Polymerization of Six- and Eight-Membered Racemic Cyclic Esters for Biodegradable Materials

The low percentage of recyclability of the polymeric materials obtained by olefin transition metal (TM) polymerization catalysis has increased the interest in their substitution with more eco-friendly materials with reliable physical and mechanical properties. Among the variety of known biodegradable polymers, linear aliphatic polyesters produced by ring-opening polymerization (ROP) of cyclic esters occupy a prominent position. The polymer properties are highly dependent on the macromolecule microstructure, and the control of stereoselectivity is necessary for providing materials with precise and finely tuned properties. In this review, we aim to outline the main synthetic routes, the physical properties and also the applications of three commercially available biodegradable materials: Polylactic acid (PLA), Poly(Lactic-co-Glycolic Acid) (PLGA), and Poly(3-hydroxybutyrate) (P3HB), all of three easily accessible via ROP. In this framework, understanding the origin of enantioselectivity and the factors that determine it is then crucial for the development of materials with suitable thermal and mechanical properties.

Bio-based hyperbranched epoxy resins: synthesis and recycling

Epoxy resins (EPs), accounting for about 70% of the thermosetting resin market, have been recognized as the most widely used thermosetting resins in the world. Nowadays, 90% of the world's EPs are obtained from the bisphenol A (BPA)-based epoxide prepolymer. However, certain limitations severely impede further applications of this advanced material, such as limited fossil-based resources, skyrocketing oil prices, nondegradability, and a "seesaw" between toughness and strength. In recent years, more and more research has been devoted to the preparation of novel epoxy materials to overcome the compromise between toughness and strength and solve plastic waste problems. Among them, the development of bio-based hyperbranched epoxy resins (HERs) is unique and attractive. Bio-based HERs synthesized from bio-derived monomers can be used as a matrix resin or a toughener resulting in partially or fully bio-based epoxy thermosets. The introduction of a hyperbranched structure can balance the strength and toughness of epoxy thermosets. Here, we especially focused on the recent progress in the development of bio-based HERs, including the monomer design, synthesis approaches, mechanical properties, degradation, and recycling strategies. In addition, we advance the challenges and perspectives to engineering application of bio-based HERs in the future. Overall, this review presents an up-to-date overview of bio-based HERs and guidance for emerging research on the sustainable development of EPs in versatile high-tech fields.

1,1'- Thiocarbonyldiimidazole Radical Copolymerization for the Preparation of Degradable Vinyl Polymers

1,1'-Thiocarbonyldiimidazole (TCDI) readily undergoes radical copolymerization with tert-butyl acrylate (tBA), N,N-dimethylacrylamide, and styrene. 1H NMR monitoring of the comonomer reactivity revealed a notable compatibility between TCDI and comonomers, resulting in similar consumption rates when TCDI was introduced at a 10% feed ratio. Furthermore, trithiocarbonate-mediated RAFT copolymerization of TCDI with tBA gave polymers that exhibited a linear increase of molar mass (Mnth = 2-10 kg mol-1) with conversion with relatively low dispersities (1.2-1.4). Importantly, this process enabled a successful chain extension of the produced P(TCDI-co-tBA) copolymer with styrene to form a diblock copolymer. The copolymers generated through this method contain TCDI-derived diimidazolyl thioether moieties, as established through 1H NMR spectroscopy. Additionally, degradation experiments using isopropylamine, benzoyl peroxide, sodium methoxide, and bleach have provided further confirmation of the presence of degradable TCDI moieties in the vinyl copolymer backbone.

Selective Transesterification to Control Copolymer Microstructure in the Ring-Opening Copolymerization of Lactide and ε-Caprolactone by Lanthanum Complexes

A series of novel lanthanum amido complexes, supported by ligands designed around the salan framework (salan = N,N'-bis(o-hydroxy, m-di-tert-butylbenzyl)-1,2-diaminoethane) were synthesized and fully characterized in the solid and solution states. The ligands incorporate benzyl or 2-pyridyl substituents at each tertiary amine center. The complexes were investigated as catalysts in the ring-opening homopolymerization of lactide (LA) and ε-caprolactone (ε-CL) and copolymerization of equimolar amounts of LA and ε-CL at ambient temperature. Solvent (THF or toluene) and the number of 2-pyridyl groups in the complex were found to influence the reactivity of the catalysts in copolymerization reactions. In all cases, complete conversion of LA to PLA was observed. The use of THF, a coordinating solvent, suppressed ε-CL polymerization, while the presence of one or more 2-pyridyl groups promoted ε-CL polymerization. Each copolymer gave a monomodal trace in gel permeation chromatography-size-exclusion chromatography (GPC-SEC) experiments, indicative of copolymer formation over homopolymerization. Copolymer microstructure was found to be dependent on catalyst structure and reaction solvent, ranging from blocky to close to alternating. Experiments revealed rapid conversion of LA in the initial stages of the reaction, followed by incorporation of ε-CL into the copolymer by either transesterification or propagation reactions. Significantly, the mode of transesterification (TI or TII) that occurs is determined by the structure of the metal complex and the reaction solvent, leading to the possibility of controlling copolymer microstructure through catalyst design.

Umpolung Isomerization in Radical Copolymerization of Benzyl Vinyl Ether with Pentafluorophenylacrylate Leading to Degradable AAB Periodic Copolymers

This study revealed that benzyl vinyl ether (BnVE) shows a peculiar isomerization propagation in its radical copolymerization with an electron-deficient acrylate carrying a pentafluorophenyl group (PFA). The co-monomer pair inherently exhibits the cross-over propagation feature due to the large difference in the electron density. However, the radical species of PFA was found to undergo a backward isomerization to the penultimate BnVE pendant giving a benzyl radical species prior to propagation with BnVE. The isomerization brings a drastic change in the character of the growing radical species from electrophilic to nucleophilic, and thus the isomerized benzyl radial species propagates with PFA. Consequently, the two monomers were consumed in the order AAB (A: PFA; B: BnVE) and the unique periodic consumption was confirmed by the pseudo-reactivity ratios calculated by the penultimate model: r11 =0.174 and r21 =6600 for PFA (M1 ) with BnVE (M2 ). The pentafluorophenyl ester groups of the resulting copolymers are transformed into ester and amide groups by post-polymerization alcoholysis and aminolysis modifications. The unique isomerization in the AAB sequence allowed the periodic introduction of a benzyl ether structure in the backbone leading to efficient degradation under acid conditions.

Development of an Efficient Thionolactone for Radical Ring-Opening Polymerization by a Combined Theoretical/Experimental Approach

The environmental impact of plastic waste has been a real problem for the past decades. The incorporation of cleavable bonds in the polymer backbone is a solution to making a commodity polymer degradable. When radical polymerization is used, this approach is made possible by radical ring-opening polymerization (rROP) of a cyclic monomer that allows for the introduction of a weak bond into the polymer backbone. Among the various cyclic monomers that could be used in rROP, thionolactones are promising structures due to the efficiency of the C═S bond to act as a radical acceptor. Nevertheless, only a few structures were reported to be efficient. In this work, we used DFT calculations to gain a better understanding of the radical reactivity of thionolactones, and in particular, we focused on the transfer rate constant ktr value and its ratio with the propagation rate constant kp of the vinyl monomer. The closer to 1, the better is the statistical incorporation of the two comonomers into the backbone. These theoretical results were in good agreement with all of the experimental data reported in the literature. We thus used this approach to understand the key parameters to tune the reactivity of thionolactone to prepare random copolymers. We identified and prepared the 7-phenyloxepane-2-thione (POT) thionolactone that led to statistical copolymers with styrene and acrylate derivatives that were efficiently degraded under accelerated conditions (KOH in THF/MeOH, TBD in THF, or mCPBA in THF), confirming the theoretical approach. The compatibility with RAFT polymerization as well as the homopolymerization behavior of POT was established. This theoretical approach paves the way for the in-silico design of new efficient thionolactones for rROP.

C-H Functionalization of Polyolefins to Access Reprocessable Polyolefin Thermosets

Upcycling plastic waste into reprocessable materials with performance-advantaged properties would contribute to the development of a circular plastics economy. Here, we modify branched polyolefins and postconsumer polyethylene through a versatile C-H functionalization approach using thiosulfonates as a privileged radical group transfer functionality. Cross-linking the functionalized polyolefins with polytopic amines provided dynamically cross-linked polyolefin networks enabled by associative bond exchange of diketoenamine functionality. A combination of resonant soft X-ray scattering and grazing incidence X-ray scattering revealed hierarchical phase morphology in which diketoenamine-rich microdomains phase-separate within amorphous regions between polyolefin crystallites. The combination of dynamic covalent cross-links and microphase separation results in useful and improved mechanical properties, including a ∼4.5-fold increase in toughness, a reduction in creep deformation at temperatures relevant to use, and high-temperature structural stability compared to the parent polyolefin. The dynamic nature of diketoenamine cross-links provides stress relaxation at elevated temperatures, which enabled iterative reprocessing of the dynamic covalent polymer network with little cycle-to-cycle property fade. The ability to convert polyolefin waste into a reprocessable thermoformable material with attractive thermomechanical properties provides additional optionality for upcycling to enable future circularity.

Upcycling of Poly(lactic acid) Waste: A Valuable Strategy to Obtain Ionic Liquids

With the aim to investigate new strategies for upcycling of plastic waste, we performed aminolysis of poly(lactic acid) (PLA), using N,N-dimethylethylenediamine (DMEDA), N,N-dimethylpropylenediamine (DMPDA), and 3-aminopropylimidazole (API) as nucleophiles. The N-substituted lactamides obtained were alkylated by using alkyl halides differing in alkyl chain length, obtaining organic salts that in most cases behaved as ionic liquids (ILs). Both aminolysis of PLA and alkylation of amides were carried out taking into consideration the basic principles of the holistic approach to green chemistry, applied at a laboratory scale, and carefully selecting the nature of the reaction solvent, temperature range, and amount of reagents. Organic salts obtained from the alkylation of N-substituted lactamides were investigated to determine their glass or solid-liquid transitions and their thermal stability. Furthermore, cytotoxicity toward normal lung fibroblasts was also assessed. Data collected show that the proposed strategy represents a valuable protocol to upcycle plastic waste, using it as starting material to obtain alternative solvents of potential industrial relevance.

PolyID: Artificial Intelligence for Discovering Performance-Advantaged and Sustainable Polymers

A necessary transformation for a sustainable economy is the transition from fossil-derived plastics to polymers derived from biomass and waste resources. While renewable feedstocks can enhance material performance through unique chemical moieties, probing the vast material design space by experiment alone is not practically feasible. Here, we develop a machine-learning-based tool, PolyID, to reduce the design space of renewable feedstocks to enable efficient discovery of performance-advantaged, biobased polymers. PolyID is a multioutput, graph neural network specifically designed to increase accuracy and to enable quantitative structure-property relationship (QSPR) analysis for polymers. It includes a novel domain-of-validity method that was developed and applied to demonstrate how gaps in training data can be filled to improve accuracy. The model was benchmarked with both a 20% held-out subset of the original training data and 22 experimentally synthesized polymers. A mean absolute error for the glass transition temperatures of 19.8 and 26.4 °C was achieved for the test and experimental data sets, respectively. Predictions were made on polymers composed of monomers from four databases that contain biologically accessible small molecules: MetaCyc, MINEs, KEGG, and BiGG. From 1.4 × 106 accessible biobased polymers, we identified five poly(ethylene terephthalate) (PET) analogues with predicted improvements to thermal and transport performance. Experimental validation for one of the PET analogues demonstrated a glass transition temperature between 85 and 112 °C, which is higher than PET and within the predicted range of the PolyID tool. In addition to accurate predictions, we show how the model's predictions are explainable through analysis of individual bond importance for a biobased nylon. Overall, PolyID can aid the biobased polymer practitioner to navigate the vast number of renewable polymers to discover sustainable materials with enhanced performance.

Closed-Loop Recyclable Poly(imine-acetal)s with Dual-Cleavable Bonds for Primary Building Block Recovery

Chemical recycling offers a promising solution for the end-of-life treatment of synthetic polymers. However, the efficient recovery of well-defined recycled building blocks continues to be a major challenge, especially for crosslinked thermosets. Here, we developed vanillin-based polymer networks functionalized with dual-cleavable imine and acetal bonds that facilitate chemical recycling to primary building blocks and their convenient separation at the molecular level. A library of crosslinked poly(imine-acetal)s was synthesized by combining the in-bulk synthesized liquid di-vanillin acetal monomer (DVA) with commercially available liquid di- and triamines under solvent-free conditions. These thermosets showed tailor-made thermal and mechanical properties along with outstanding chemical recyclability. Under aqueous acidic conditions, poly(imine-acetal)s selectively and completely disintegrate into small molecules. During the polymer design stage, these compounds were carefully selected to enable facile separation without tedious techniques. As a result, the primary building blocks were isolated in high yields and purity and immediately reused to produce fresh polymers with identical thermomechanical properties. Since our "design for recycling" concept aims at obtaining the primary building blocks rather than monomers after depolymerization, a plethora of possibilities are unlocked to utilize these chemical resources, including closed-loop recycling as portrayed.

A cellular platform for production of C4 monomers

Living organisms carry out a wide range of remarkable functions, including the synthesis of thousands of simple and complex chemical structures for cellular growth and maintenance. The manipulation of this reaction network has allowed for the genetic engineering of cells for targeted chemical synthesis, but it remains challenging to alter the program underlying their fundamental chemical behavior. By taking advantage of the unique ability of living systems to use evolution to find solutions to complex problems, we have achieved yields of up to ∼95% for three C4 commodity chemicals, n-butanol, 1,3-butanediol, and 4-hydroxy-2-butanone. Genomic sequencing of the evolved strains identified pcnB and rpoBC as two gene loci that are able to alter carbon flow by remodeling the transcriptional landscape of the cell, highlighting the potential of synthetic pathways as a tool to identify metabolic control points.

Elucidating the Effect of Amine Charge State on Poly(β-amino ester) Degradation Using Permanently Charged Analogs

With synthetic ease and tunable degradation lifetimes, poly(β-amino ester)s (PBAEs) have found use in increasingly diverse applications, from gene therapy to thermosets. Protonatable amines in each repeating unit impart pH-dependent solution behavior and lifetimes, with acidic conditions favoring solubility, yet slowing hydrolysis. Due in part to these interconnected phenomena governing pH-dependent PBAE degradation, predictive degradation models, which would enable user-defined lifetimes, remain elusive. To separate the effects of charge state and solution pH on PBAE degradation, we synthesized poly(β-quaternary ammonium ester)s (PBQAEs), which differ from their parent PBAEs only by an additional methyl group, generating polymers with pH-independent cationic charge. Like PBAEs, PBQAE hydrolysis accelerates with increasing pH, although at a given pH, PBAE degradation outpaces PBQAE degradation. This difference is more pronounced in basic solutions, suggesting that deprotonated PBAE amines accelerate hydrolysis, providing an additional tuning parameter to PBAE lifetime and informing the degradation of PBAEs and other pH-responsive polymers.

High Performance Star Block Aliphatic Polyester Thermoplastic Elastomers Using PDLA-b-PLLA Stereoblock Hard Domains

Star block (ABC)4 terpolymers consisting of a rubbery poly(γ-methyl-ε-caprolactone) (PγMCL) (C) core and hard poly(l-lactide) (PLLA) (B) and poly(d-lactide) (PDLA) (A) end-blocks with varying PDLA to PLLA block ratios were explored as high-performance, sustainable, aliphatic polyester thermoplastic elastomers (APTPEs). The stereocomplexation of the PDLA/PLLA blocks within the hard domains provided the APTPEs with enhanced thermal stability and an increased resistance to permanent deformation compared to nonstereocomplex analogs. Variations in the PDLA:PLLA block ratio yielded tunable mechanical properties likely due to differences in the extent and location of stereocomplex crystallite formation as a result of architectural constraints. This work highlights the improvements in mechanical performance due to stereocomplexation within the hard domains of these APTPEs and the tunable nature of the hard domains to significantly impact material properties, furthering the development of sustainable materials that are competitive with current industry standard materials.

A microbial evolutionary approach for a sustainable future

With the continued population increase, more sustainable use of water, land, air and chemicals is imperative. Microorganisms will need to be called upon to aid in many sustainability efforts. Prokaryotes are the fastest-evolving cellular life, and most manipulatable via synthetic biology. Moreover, their natural diversity in processing organic and inorganic chemicals, and their survivability in extreme niches, make them prime agents to enlist for solving many of society's pressing problems.

Tracking of Protein Adsorption on Poly(l-lactic acid) Film Surfaces: The Role of Molar Mass

Poly(l-lactic acid) (PLLA) has been extensively utilized as a biomaterial for various biomedical applications. The first and one of the most critical steps upon contact with biological fluids is the adsorption of proteins on the material's surface. Understanding the behavior of protein adsorption is vital for guiding the synthesis and preparation of PLLA for biomedical purposes. In this study, total internal reflection fluorescence microscopy was employed to investigate the adsorption of human serum albumin (HSA) on PLLA films with different molar masses. We found that molar mass affects HSA adsorption in such a way that it affects only the adsorption rate constants, but not the desorption rate constants. Additionally, we observed that HSA adsorption is spatially heterogeneous and exhibits many strong binding sites regardless of the molar mass of the PLLA films. We found that the free volume of PLLA plays a crucial role in determining its water uptake capacity and surface hydration, consequently impacting the adsorption of HSA.

Emerging Trends in the Chemistry of End-to-End Depolymerization

Over the past couple of decades, polymers that depolymerize end-to-end upon cleavage of their backbone or activation of a terminal functional group, sometimes referred to as "self-immolative" polymers, have been attracting increasing attention. They are of growing interest in the context of enhancing polymer degradability but also in polymer recycling as they allow monomers to be regenerated in a controlled manner under mild conditions. Furthermore, they are highly promising for applications as smart materials due to their ability to provide an amplified response to a specific signal, as a single sensing event is translated into the generation of many small molecules through a cascade of reactions. From a chemistry perspective, end-to-end depolymerization relies on the principles of self-immolative linkers and polymer ceiling temperature (Tc). In this article, we will introduce the key chemical concepts and foundations of the field and then provide our perspective on recent exciting developments. For example, over the past few years, new depolymerizable backbones, including polyacetals, polydisulfides, polyesters, polythioesters, and polyalkenamers, have been developed, while modern approaches to depolymerize conventional backbones such as polymethacrylates have also been introduced. Progress has also been made on the topological evolution of depolymerizable systems, including the introduction of fully depolymerizable block copolymers, hyperbranched polymers, and polymer networks. Furthermore, precision sequence-defined oligomers have been synthesized and studied for data storage and encryption. Finally, our perspectives on future opportunities and challenges in the field will be discussed.

Electrochemical Wastewater Refining: A Vision for Circular Chemical Manufacturing

Wastewater is an underleveraged resource; it contains pollutants that can be transformed into valuable high-purity products. Innovations in chemistry and chemical engineering will play critical roles in valorizing wastewater to remediate environmental pollution, provide equitable access to chemical resources and services, and secure critical materials from diminishing feedstock availability. This perspective envisions electrochemical wastewater refining─the use of electrochemical processes to tune and recover specific products from wastewaters─as the necessary framework to accelerate wastewater-based electrochemistry to widespread practice. We define and prescribe a use-informed approach that simultaneously serves specific wastewater-pollutant-product triads and uncovers a mechanistic understanding generalizable to broad use cases. We use this approach to evaluate research needs in specific case studies of electrocatalysis, stoichiometric electrochemical conversions, and electrochemical separations. Finally, we provide rationale and guidance for intentionally expanding the electrochemical wastewater refining product portfolio. Wastewater refining will require a coordinated effort from multiple expertise areas to meet the urgent need of extracting maximal value from complex, variable, diverse, and abundant wastewater resources.

Copolymer Brush Particle Hybrid Materials with "Recall-and-Repair" Capability

The effect of sequence structure on the self-healing and shape-memory properties of copolymer-tethered brush particle films was investigated and compared to linear copolymer analogs. Poly(n-butyl acrylate-co-methyl methacrylate), P(BA-co-MMA), and linear and brush analogs with controlled gradient and statistical sequence were synthesized by atom transfer radical polymerization (ATRP). The effect of sequence on self-healing in BA/MMA copolymer brush particle hybrids followed similar trends as for linear analogs. Most rapid restoration of mechanical properties was found for statistical copolymer sequence; an increase of the high Tg (MMA) component provided a path to raise the material's modulus while retaining self-heal ability. Creep testing revealed profound differences between linear and brush systems. While linear copolymers featured substantial viscous deformation when exposed to constant stress in the linear regime, brush analogs displayed minimal permanent deformation and featured shape restoration. The reduction of flow was interpreted to be a consequence of slow cooperative relaxation due to the complex microstructure of brush particle hybrids in which long-range motions are constrained through entanglements and slow-diffusing particle cores. The rubbery-like response imparts BA/MMA copolymer brush material systems concurrent "shape-memory" and "self-heal" capability. This ability to "recall-and-repair" could find application in the design of functional hybrid materials, for example, for soft robotics.

Thiol-Aldehyde Polycondensation for Bio-based Adaptable and Degradable Phenolic Polymers

Designing sustainable materials with tunable mechanical properties, intrinsic degradability, and recyclability from renewable biomass through a mild process has become vital in polymer science. Traditional phenolic resins are generally considered to be not degradable or recyclable. Here we report the design and synthesis of linear and network structured phenolic polymers using facile polycondensation between natural aldehyde-bearing phenolic compounds and polymercaptans. Linear phenolic products are amorphous with Tg between -9 °C and 12 °C. Cross-linked networks from vanillin and its di-aldehyde derivative exhibited excellent mechanical strength between 6-64 MPa. The connecting dithioacetals are associatively adaptable strong bonds and susceptible to degradation in oxidative conditions to regenerate vanillin. These results highlight the potential of biobased sustainable phenolic polymers with recyclability and selective degradation, as a complement to the traditional phenol-formaldehyde resins.

Toughening CO2 -Derived Copolymer Elastomers Through Ionomer Networking

Utilizing carbon dioxide (CO2 ) to make polycarbonates through the ring-opening copolymerization (ROCOP) of CO2 and epoxides valorizes and recycles CO2 and reduces pollution in polymer manufacturing. Recent developments in catalysis provide access to polycarbonates with well-defined structures and allow for copolymerization with biomass-derived monomers; however, the resulting material properties are underinvestigated. Here, new types of CO2 -derived thermoplastic elastomers (TPEs) are described together with a generally applicable method to augment tensile mechanical strength and Young's modulus without requiring material re-design. These TPEs combine high glass transition temperature (Tg ) amorphous blocks comprising CO2 -derived poly(carbonates) (A-block), with low Tg poly(ε-decalactone), from castor oil, (B-block) in ABA structures. The poly(carbonate) blocks are selectively functionalized with metal-carboxylates where the metals are Na(I), Mg(II), Ca(II), Zn(II) and Al(III). The colorless polymers, featuring <1 wt% metal, show tunable thermal (Tg ), and mechanical (elongation at break, elasticity, creep-resistance) properties. The best elastomers show >50-fold higher Young's modulus and 21-times greater tensile strength, without compromise to elastic recovery, compared with the starting block polymers. They have wide operating temperatures (-20 to 200 °C), high creep-resistance and yet remain recyclable. In the future, these materials may substitute high-volume petrochemical elastomers and be utilized in high-growth fields like medicine, robotics, and electronics.

Rising of Dynamic Polyimide Materials: A Versatile Dielectric for Electrical and Electronic Applications

Polyimides (PIs) are widely used in circuit components, electrical insulators, and power systems in modern electronic devices and large electrical appliances. Electrical/mechanical damage of materials are important factors that threaten reliability and service lifetime. Dynamic (self-healable, recyclable and degradable) PIs, a promising class of materials that successfully improve electrical/mechanical properties after damage, are anticipated to solve this issue. The viewpoints and perspectives on the status and future trends of dynamic PI based on a few existing documents are shared. The main damage forms of PI dielectric materials in the application process are first introduced, and initial strategies and schemes to solve these problems are proposed. Fundamentally, the bottleneck issues faced by the development of dynamic PIs are indicated, and the relationship between various damage forms and the universality of the method is evaluated. The potential mechanism of the dynamic PI to deal with electrical damage is highlighted and several feasible prospective schemes to address electrical damage are discussed. This study is concluded by presenting a short outlook and future improvements to systems, challenges, and solutions of dynamic PI in electrical insulation. The summary of theory and practice should encourage policy development favoring energy conservation and environmental protection and promoting sustainability.

UV-Curing Additive Manufacturing of Bio-Based Thermosets: Effect of Diluent Concentration on Printing and Material Properties of Itaconic Acid-Based Materials

In the quest toward sustainable thermosets, research has been conducted on various polymer classes like epoxy, benzoxazines, acryl-/methacrylates, etc. One particular group that can also be utilized as sustainable inks for additive manufacturing is itaconic acid-based unsaturated polyester resins. However, due to increased viscosity of the resins, the use of reactive diluents is required to increase their processability. While research has focused on creating different polymeric structures to expand the possible applications, the required amount of diluent has not received equal attention. In this work, a group of itaconic acid-based polyesters was synthesized to create a series of formulations with different reactive diluent contents. The physicochemical properties of the prepared formulations, along with their reactivity toward UV light, were assessed via photo-differential scanning calorimetry (photo-DSC), real-time attenuated total reflectance (RT-ATR), and photorheology measurements. The same formulations were then used to fabricate test specimens via digital light processing (DLP) three-dimensional (3D) printing, which were examined as to their thermomechanical properties by means of dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) measurements.