1,3,5-Triazine-Based Microporous Polymers with Tunable Porosities for CO2 Capture and Fluorescent Sensing

Room temperature sensing of CO2 using C3-symmetry pyridinium-based porous ionic polymers with triazine or benzene cores

A new class of ionic polymers tethering triazine (benzene) core hybrids with three dipyridinium as cationic counterparts combined with bromide and/or chloride anions PPyBz-OBr and PPyTri-OCl were successfully prepared via the alkylation of 4,4'-dipyridyl derivatives 4,4'-bp-O with 1,3,5-tris(bromomethyl)benzene BB and/or cyanuric chloride CC. The precursor, 4,4'-bp-O,was synthesized through the condensation of 4-pyridine carboxaldehyde and 4,4'-oxydianiline. The resulting ionic polymers, PPyBz-OBr and PPyTri-OCl, underwent metathetical anion exchange, forming new ionic polymers bearing LiTFSI and KPF6 as anions. Characterization of the synthesized hybrid molecules was performed through FTIR, 1H NMR, and 13C NMR analyses. PXRD and SEM showed semi-crystalline structures and a homogenous distribution of micro-/or nanoparticles. TGA and DTA displayed high thermal stability of the synthesized polymer. The sensing activity of the modified ionic polymers was examined using a quartz crystal nanobalance (QCN) for CO2 detection. The resulting sensor demonstrated the ability to provide precise, selective, and reproducible CO2 measurements.

A microporous polymer based on nonconjugated hindered biphenyls that emits blue light

Microporous organic polymers that have three-dimensional connectivity stemming from monomers with tetrahedral or tetrahedron-like geometry can have high surface areas and strong fluorescence. There are however few examples of such polymers based on hindered biaryls, and their fluorescence has not been studied. Hypothesizing that the contortion in a hindered biphenyl moiety would modulate the optical properties of a polymer built from it, we synthesized a meta-enchained polyphenylene from a 2,2',6,6'-tetramethylbiphenyl-based monomer, in which the two phenyl rings are nearly mutually perpendicular. The polymer was microporous with SBET = 495 m2 g-1. The polymer absorbed near-UV light and emitted blue fluorescence despite the meta-enchainment that would have been expected to break the conjugation. A related copolymer, synthesized from 2,2',6,6'-tetramethylbiphenyl-based and unsubstituted biphenyl-based monomers, was microporous but not fluorescent.

Triazine and Fused Thiophene-Based Donor-Acceptor Type Semiconducting Conjugated Polymer for Enhanced Visible-Light-Induced H2 Production

Conjugated polymers have attracted significant attention in the field of photocatalysis due to their exceptional properties, including versatile optimization, cost-effectiveness, and structure stability. Herein, two conjugated porous polymers, PhIN-CPP and ThIN-CPP, based on triazines, were meticulously designed and successfully synthesized using benzene and thiophene as building blocks. Based on UV diffuse reflection spectra, the photonic band gaps of PhIN-CPP and ThIN-CPP were calculated as 2.05 eV and 1.79 eV. The PhIN-CPP exhibited a high hydrogen evolution rate (HER) of 5359.92 μmol·g-1·h-1, which is 10 times higher than that of Thin-CPP (538.49 μmol·g-1·h-1). The remarkable disparity in the photocatalytic performance can be primarily ascribed to alterations in the band structure of the polymers, which includes its more stable benzene units, fluffier structure, larger specific surface area, most pronounced absorption occurring in the visible region and highly extended conjugation with a high density of electrons. The ΔEST values for PhIN-CPP and ThIN-CPP were calculated as 0.79 eV and 0.80 eV, respectively, based on DFT and TD-DFT calculations, which revealed that the incorporation of triazine units in the as-prepared CMPs could enhance the charge transfer via S1 ↔ T1 and was beneficial to the photocatalytic decomposition of H2O. This study presents a novel concept for developing a hybrid system for preparation of H2 by photocatalysis with effectiveness, sustainability, and economy.

Transient-State Self-Bipolarized Organic Frameworks of Single Aromatic Units for Natural Sunlight-Driven Photosynthesis of H2O2

Constructing π-conjugated polymer structures through covalent bonds dominates the design of organic framework photocatalysts, which significantly depends on the selection of multiple donor-acceptor building blocks to narrow the optical gap and increase the lifetimes of charge carriers. In this work, self-bipolarized organic frameworks of single aromatic units are demonstrated as novel broad-spectrum-responsive photocatalysts for H2O2 production. The preparation of such photocatalysts is only to fix the aromatic units (such as 1,3,5-triphenylbenzene) with alkane linkers in 3D space. Self-bipolarized aromatic units can drive the H2O2 production from H2O and O2 under natural sunlight, wide pH ranges (3.0-10.0) and natural water sources. Moreover, it can be extended to catalyze the oxidative coupling of amines. Experimental and theoretical investigation demonstrate that such a strategy obeys the mechanism of through-space π-conjugation, where the closely face-to-face overlapped aromatic rings permit the electron and energy transfer through the large-area delocalization of the electron cloud under visible light irradiation. This work introduces a novel design concept for the development of organic photocatalysts, which will break the restriction of conventional through-band π-conjugation structure and will open a new way in the synthesis of organic photocatalysts.

Dibromomethane Knitted Highly Porous Hyper-Cross-Linked Polymers for Efficient High-Pressure Methane Storage

Hyper-cross-linked polymers (HCPs) with ultra-high porosity, superior physicochemical stability, and excellent cost-effectiveness are attractive candidates for methane storage. However, the construction of HCPs with BET surface areas exceeding 3000 m2 g-1 remains extremely challenging. In this work, a newly developed DBM-knitting method with a slow-knitting rate is employed to increase the cross-linking degree, in which dichloromethane (DCM) is replaced by dibromomethane (DBM) as both solvent and electrophilic cross-linker, resulting in highly porous and physicochemically stable HCPs. The BET surface areas of DBM-knitted SHCPs-Br are 44%-120% higher than that of DCM-knitted SHCPs-Cl using the same building blocks. Remarkably, SHCP-3-Br exhibits an unprecedentedly high porosity (SBET = 3120 m2 g-1) among reported HCPs, and shows a competitive volumetric 5-100 bar working methane capacity of 191 cm3 (STP) cm-3 at 273 K calculated by using real packing density, which outperforms sate-of-art metal-organic framework (MOFs) at comparable conditions. This facile and versatile low-knitting-rate strategy enables effective improvement in the porosity of HCPs for porosity-desired applications.

The preparation of hexaphenylsilole-based conjugated microporous polymer for fluorescence sensing o-nitrophenol

A first hexaphenylsilole-based conjugated microporous polymer, termed THPS, was prepared by a Friedel-Crafts arylation reaction of 1,1,2,3,4,5-hexabenylthirole with 2,4,6-trichloro-1,3,5-triazine catalyzed by anhydrous aluminium trichloride (AlCl3) in 1,2-dichloroethane. Its Brunauer-Emmett-Teller and Langmuir surface area reached up to 1579 and 2081 m2 g-1, and total pore volume and micropore pore volume were severally 0.8325 and 0.7322 cm3 g-1. THPS could fluorescence-sense o-nitrophenol with high sensitivity and selectivity. Its fluorescence quenching constant (KSV) and limits of detection (LODs) were severally 8.32 × 103 L mol-1 and 3.61 × 10-10 mol L-1. The fluorescence quenching of THPS by o-nitrophenol was originated from the combined action of both photo-induced electron transfer mechanism and resonance energy transfer mechanism.

Synthesis of Chiral Triazine Frameworks for Enantiodiscrimination

Manipulation of the structure of covalent organic frameworks at the molecular level is an efficient strategy to shift their biological, physicochemical, optical, and electrical properties in the desired windows. In this work, we report on a new method to construct chiral triazine frameworks using metal-driven polymerization for enantiodiscrimination. The nucleophilic substitution reaction between melamine and cyanuric chloride was performed in the presence of PdCl2, ZnCl2, and CuCl2 as chirality-directing agents. Palladium, with the ability of planar complex formation, was able to assemble monomers in two-dimensions and drive the reaction in two directions, leading to a two-dimensional triazine network with several micrometers lateral size. Nonplanar arrangements of monomers in the presence of ZnCl2 and CuCl2, however, resulted in calix and bouquet structures, respectively. While 2D and bouquet structures showed strong negative and positive bands in the CD spectra, respectively, their calix counterparts displayed long-range weak negative bands. In spite of the ability of both calix and bouquet networks to load l-histidine 35 and 50% more than d-histidine from pure enantiomers, respectively, only calix counterparts were able to take up this enantiomer (78%) from the racemic mixture. The two-dimensional polytriazine network did not show any specific interactions with pure enantiomers or their racemic mixtures.

Synthesis of aromatic polynitroso compounds: Towards functional azodioxy-linked porous polymers

The polymerization property of aromatic polynitroso compounds could be used to create azodioxy porous networks with possible application for the adsorption of CO2, the main greenhouse gas. Herein, we report the synthesis and characterization of new aromatic polynitroso compounds, with para-nitroso groups attached to the triphenylbenzene, triphenylpyridine, triphenyltriazine and triphenylamine moiety. The synthesis of the pyridine-based trinitroso compound was performed by reduction of the corresponding trinitro derivative to N-arylhydroxylamine followed by oxidation to the trinitroso product. For the synthesis of the benzene- and triazine-based trinitroso compounds, a novel synthetic strategy was implemented, which included cyclotrimerization of the 4-nitrosoacetophenone and 4-nitrosobenzonitrile, respectively. Reduction of the trinitro compound with triphenylamine unit produced the dinitroso product. In a solid state, all synthesized compounds form E-azodioxy oligomers or polymers. While azodioxy polymer with triphenylbenzene moiety is an amorphous solid, other azodioxy oligomers and polymers displayed sharp diffraction peaks pointing to their crystalline nature. A computational study indicated that eclipsed AA configurations are preferred over staggered AB and inclined AA' configurations. The serrated layers may be the most likely outcome when/if 2D layers form an organized polymer network of azodioxy linked triphenyltriazine-based building blocks.

Building Porous Ni(Salen)-Based Catalysts from Waste Styrofoam via Autocatalytic Coupling Chemistry for Heterogeneous Oxidation with Molecular Oxygen

The development of robust and industrially viable catalysts from plastic waste is of great significance, and the facile construction of high performance heterogeneous catalyst systems for phenol-quinone conversions remains a grand challenge. Herein, a feasible strategy is demonstrated to reclaim Styrofoam into hierarchically porous nickel-salen-loaded hypercrosslinked polystyrene (PS@Ni-salen) catalysts with high activities through an unusual autocatalytic coupling route. The salen is immobilized onto PS chain by Friedel-Crafts alkylation of benzyl chloride derivatives, and the generated hydrogen chloride coordinately promotes the simultaneous crosslinking and bridge formation between aromatic rings via a Scholl coupling route, leading to hierarchically porous networks. After the metallization with Ni, the resultant networks exhibit high catalytic activity for the oxidation of 2,3,6-trimethylphenol to 2,3,5-trimethyl-1,4-benzoquinone under mild conditions (303 K, 1 bar of O2 ). This catalyst also demonstrates attractive recycling performance without an obvious loss of catalytic efficiency over five consecutive cycles. This methodology might provide a potential sustainable alternative to construct environmentally benign and cost-effective catalysts for specific organic transformation.

Porous organic polymers (POPs) for environmental remediation

Modern global industrialization along with the ever-increasing growth of the population has resulted in continuous enhancement in the discharge and accumulation of various toxic and hazardous chemicals in the environment. These harmful pollutants, including toxic gases, inorganic heavy metal ions, anthropogenic waste, persistent organic pollutants, toxic dyes, pharmaceuticals, volatile organic compounds, etc., are destroying the ecological balance of the environment. Therefore, systematic monitoring and effective remediation of these toxic pollutants either by adsorptive removal or by catalytic degradation are of great significance. From this viewpoint, porous organic polymers (POPs), being two- or three-dimensional polymeric materials, constructed from small organic molecules connected with rigid covalent bonds have come forth as a promising platform toward various leading applications, especially for efficient environmental remediation. Their unique chemical and structural features including high stability, tunable pore functionalization, and large surface area have boosted the transformation of POPs into various macro-physical forms such as thick and thin-film membranes, which led to a new direction in advanced level pollutant removal, separation and catalytic degradation. In this review, our focus is to highlight the recent progress and achievements in the strategic design, synthesis, architectural-engineering and applications of POPs and their composite materials toward environmental remediation. Several strategies to improve the adsorption efficiency and catalytic degradation performance along with the in-depth interaction mechanism of POP-based materials have been systematically summarized. In addition, evolution of POPs from regular powder form application to rapid and more efficient size and chemo-selective, "real-time" applicable membrane-based application has been further highlighted. Finally, we put forward our perspective on the challenges and opportunities of these materials toward real-world implementation and future prospects in next generation remediation technology.

Synthesis and Characterization of Benzene- and Triazine-Based Azo-Bridged Porous Organic Polymers

Porous organic polymers incorporating nitrogen-rich functionalities have recently emerged as promising materials for efficient and highly selective CO₂ capture and separation. Herein, we report synthesis and characterization of new two-dimensional (2D) benzene- and triazine-based azo-bridged porous organic polymers. Different synthetic approaches towards the porous azo-bridged polymers were tested, including reductive homocoupling of aromatic nitro monomers, oxidative homocoupling of aromatic amino monomers and heterocoupling of aromatic nitro monomers and a series of aromatic diamines of different lengths and rigidity. IR spectroscopy, ¹³C CP/MAS NMR spectroscopy, powder X-ray diffraction, elemental analysis, thermogravimetric analysis, nitrogen adsorption-desorption experiments and computational study were used to characterize structures and properties of the resulting polymers. The synthesized azo-bridged polymers are all amorphous solids of good thermal stability, exhibiting various surface areas (up to 351 m² g^-1). The obtained results indicated that the synthetic methods and building units have a pronounced effect on the porosity of the final materials. Reductive and oxidative homocoupling of aromatic nitro and amino building units, respectively, lead to 2D azo-bridged polymers of substantially higher porosity when compared to those produced by heterocoupling reactions. Periodic DFT calculations and Grand-canonical Monte Carlo (GCMC) simulations suggested that, within the used approximations, linear linkers of different lengths do not significantly affect CO₂ adsorption properties of model azo-bridged polymers.

Triazine-based two dimensional porous materials for visible light-mediated oxidation of sulfides to sulfoxides with O2

Recently, triazine-based two dimensional (2D) porous materials have received increasing attention in photocatalysis. Herein, CTF-1, a covalent triazine framework, was adopted as the blueprint for designing a 2D bespoke photocatalyst. The thiazolo[5,4-d]thiazole (TzTz) linkage was inserted into the framework of CTF-1, affording TzTz-TA, which belongs to conjugated microporous polymers (CMPs). Rather than the direct insertion via the challenging CH activation, TzTz-TA was assembled from 2,4,6-tris(4-formylphenyl)-1,3,5-triazine and dithiooxamide, in which TzTz was formed in situ by a process of catalyst-free solvothermal condensation. Both CTF-1 and TzTz-TA had similar energy gaps (E_g), photocurrents, and charge carrier lifetimes, in line with the similar molecular underpinnings. However, the reduction potential of TzTz-TA is less negative than that of CTF-1 due to the insertion of TzTz linkage, in a more appropriate position for activating O₂ to superoxide (O₂^•-). In return, blue light-mediated oxidation of sulfides to sulfoxides with O₂ over TzTz-TA was accomplished with significantly superior conversions to those over CTF-1. Intriguingly, extensive sulfides could be oxidized to corresponding sulfoxides with outstanding recycling stability of TzTz-TA. Notably, attendance of an induction period was observed during TzTz-TA photocatalysis. This work highlights the vast potential of designing triazine-based porous materials to meet the tailor-made demands, such as the oxidative transformation of organic molecules with O₂.

Porous organic polymers as a platform for sensing applications

Sensing analysis is significantly important for human health and environmental safety, and has gained increasing concern. As a promising material, porous organic polymers (POPs) have drawn widespread attention due to the availability of plentiful building blocks and their tunable structures, porosity and functions. Moreover, the permanent porous nature could provide a micro-environment to interact with guest molecules, rendering POPs attractive for application in the sensing field. In this review, we give a comprehensive overview of POPs as a platform for sensing applications. POP-based sensors are mainly divided into five categories, including fluorescence turn-on sensors, fluorescence turn-off sensors, ratiometric fluorescent sensors, colorimetric sensors and chemiresistive sensors, and their various sensing applications in detecting explosives, metal ions, anions, small molecules, biological molecules, pH changes, enantiomers, latent fingerprints and thermosensation are summarized. The different structure-based POPs and their corresponding synthetic strategies as well as the related sensing mechanisms mainly including energy transfer, donor-acceptor electron transfer, absorption competition quenching and inner filter effect are also involved in the discussion. Finally, the future outlook and perspective are addressed briefly.

Acetylene/Vinylene-Bridged π-Conjugated Covalent Triazine Polymers for Photocatalytic Aerobic Oxidation Reactions under Visible Light Irradiation

Solar-driven photocatalytic chemical transformation provides a sustainable strategy to produce valuable feedstock, but designing photocatalysts with high efficiency remains challenging. Herein, two acetylene- or vinylene-bridged π-conjugated covalent triazine polymers, A-CTP-DPA and V-CTP-DPE, were successfully fabricated toward metal-free photocatalytic oxidation under visible light irradiation. Compared to the one without acetylene or vinylene bridge, both resulting polymers exhibited superior activity in photocatalytic selective oxidation of sulfides and oxidative coupling of amines; in particular, A-CTP-DPA delivered an optimal photocatalytic performance. The superior activity was attributed to the broadened spectral response range, effective separation, rapid transportation of photogenerated charge carriers, and abundant active sites for photogenerated electrons due to the existence of the acetylene bridge in the framework. This work highlights the potential of acetylene and vinylene bridges in tuning catalytic efficiency of organic semiconductors, providing a guideline for the design of efficient photocatalysts.

Pyridine-based conjugated microporous polymers as adsorbents for CO2 uptake via weak supramolecular interaction

Two pyridine-based conjugated microporous polymers with high micro-porosity exhibited a high CO2 capture value via weak supramolecular interaction.

Covalent triazine frameworks for the dynamic adsorption/separation of benzene/cyclohexane mixtures

High adsorption selectivities for benzene and cyclohexane of three covalent triazine frameworks have been prepared via Friedel–Crafts reactions.

Covalent Organic Polymers and Frameworks for Fluorescence-Based Sensors

Following the advancements and diversification in synthetic strategies for porous covalent materials in the literature, the materials science community started to investigate the performance of covalent organic polymers (COPs) and covalent organic frameworks (COFs) in applications that require large surface areas for interaction with other molecules, chemical stability, and insolubility. Sensorics is an area where COPs and COFs have demonstrated immense potential and achieved high levels of sensitivity and selectivity on account of their tunable structures. In this review, we focus on those covalent polymeric systems that use fluorescence spectroscopy as a method of detection. After briefly reviewing the physical basis of fluorescence-based sensors, we delve into various kinds of analytes that have been explored with COPs and COFs, namely, heavy metal ions, explosives, biological molecules, amines, pH, volatile organic compounds and solvents, iodine, enantiomers, gases, and anions. Throughout this work, we discuss the mechanisms involved in each sensing application and aim to quantify the potency of the discussed sensors by providing limits of detection and quenching constants when available. This review concludes with a summary of the surveyed literature and raises a few concerns that should be addressed in the future development of COP and COF fluorescence-based sensors.

[Advances in construction of triazine-based porous organic polymers and their applications in solid phase microextraction]

The large surface area, adjustable pore structure, good thermal and chemical stabilities, and abundant π-electron systems make triazine-based porous organic polymers (TPOPs) as promising porous materials for gas storage, catalysis, energy conversion and adsorption. Recently, TPOPs have aroused ever-increasing interest and are considered as one of the research highlights in solid phase microextraction (SPME) and other sample pretreatment techniques. This minireview summarizes the recent advancements in the synthesis of TPOPs and their applications in SPME. The application prospects of the TPOPs in SPME and other sample pretreatment techniques are also presented.

Meso/Microporous Carbons from Conjugated Hyper-Crosslinked Polymers Based on Tetraphenylethene for High-Performance CO2 Capture and Supercapacitor

In this study, we successfully synthesized two types of meso/microporous carbon materials through the carbonization and potassium hydroxide (KOH) activation for two different kinds of hyper-crosslinked polymers of TPE-CPOP1 and TPE-CPOP2, which were synthesized by using Friedel–Crafts reaction of tetraphenylethene (TPE) monomer with or without cyanuric chloride in the presence of AlCl₃ as a catalyst. The resultant porous carbon materials exhibited the high specific area (up to 1100 m² g⁻¹), total pore volume, good thermal stability, and amorphous character based on thermogravimetric (TGA), N₂ adsoprtion/desorption, and powder X-ray diffraction (PXRD) analyses. The as-prepared TPE-CPOP1 after thermal treatment at 800 °C (TPE-CPOP1-800) displayed excellent CO₂ uptake performance (1.74 mmol g⁻¹ at 298 K and 3.19 mmol g⁻¹ at 273 K). Furthermore, this material possesses a high specific capacitance of 453 F g⁻¹ at 5 mV s⁻¹ comparable to others porous carbon materials with excellent columbic efficiencies for 10,000 cycle at 20 A g⁻¹.

Tetrathienoanthracene-functionalized conjugated microporous polymers as an efficient, metal-free visible-light solid organocatalyst for heterogeneous photocatalysis

Constructing tetrathienoanthracene-based CMPs as an efficient porous organo-photocatalyst for heterogeneous photocatalysis.

A spirobifluorene-based water-soluble imidazolium polymer for luminescence sensing

A water-soluble luminescent sensor based on a spirobifluorene-based imidazolium polymer is developed for the selective sensing of Fe³⁺ and Cr₂O₇²⁻.

Covalent Triazine Framework Nanoparticles via Size-Controllable Confinement Synthesis for Enhanced Visible-Light Photoredox Catalysis

For metal-free, organic conjugated polymer-based photocatalysts, synthesis of defined nanostructures is still highly challenging. Here, we report the formation of covalent triazine framework (CTF) nanoparticles via a size-controllable confined polymerization strategy. The uniform CTF nanoparticles exhibited significantly enhanced activity in the photocatalytic formation of dibenzofurans compared to the irregular bulk material. The optoelectronic properties of the nanometer-sized CTFs could be easily tuned by copolymerizing small amounts of benzothiadiazole into the conjugated molecular network. This optimization of electronic properties led to a further increase in observed photocatalytic efficiency, resulting in total an 18-fold enhancement compared to the bulk material. Full recyclability of the heterogeneous photocatalysts as well as catalytic activity in dehalogenation, hydroxylation and benzoimidazole formation reactions demonstrated the utility of the designed materials.

A dual-functional urea-linked conjugated porous polymer anchoring silver nanoparticles for highly efficient CO2 conversion under mild conditions

A dual-functional urea-linked conjugated porous polymer (UCPP) assembled by enol-imine with ordered unit arrays that act as potential anchoring sites in the networks was fabricated, and was further applied as a support for Ag nanoparticles by the coordinate interaction between them. The UCPP not only can well confine the Ag particle size and facilitate high dispersion, but also can afford special CO₂-philic moieties to enhance the adsorption properties. The resulting Ag@UCPP as a heterogeneous catalyst exhibited excellent activity for the carboxylative cyclization of propargyl alcohols with CO₂ under mild conditions, together with good recyclability, which is probably attributed to the synergistic effect of the UCPP on the adsorption and activation of CO₂ and the immobilization of Ag nanoparticles. This work affords possible opportunities for the design and synthesis of a heterogeneous catalyst toward CO₂ conversion.

Thiophene-embedded conjugated microporous polymers for photocatalysis

“Bottom-up” embedding of thiophene derivatives into CMPs for highly efficient heterogeneous photocatalysis is reported.

Synthesis of 1,6-disubstituted pyrene-based conjugated microporous polymers for reversible adsorption and fluorescence sensing of iodine

Four 1,6-disubstituted pyrene-based fluorescent conjugated microporous polymers were synthesized by Sonogashira–Hagihara reaction, trimerization reaction of –CN, and Friedel–Crafts reaction, respectively, which can efficient capture and sense I₂.

Preparation of a Magnetic Nanoporous Polymer for the Fast and Efficient Extraction of 5-Nitroimidazoles in Milk

A magnetic nanoporous organic polymer (M-NOP) was prepared as a new adsorbent with excellent extraction capacity and rapid adsorption kinetics for 5-nitroimidazoles (5-NDZs). Hence, a rapid and effective method was proposed for determination of 5-NDZs in milk by combining M-NOP-based magnetic solid-phase extraction with high-performance liquid chromatography. Main extraction conditions were investigated. Under optimal conditions, good linear response was achieved in a range of 2.4-100 ng mL^-1 with a lower detection limit of 0.8-1.0 ng mL^-1. High accuracy with a recovery of 80.0-116.0% for the fortified samples, good repeatability with relative standard deviation below 10%, and a high enrichment factor of 97-111 were obtained. The rapid adsorption of 5-NDZs on M-NOP is mainly driven by H-bonding, π-stacking, and polar interactions. Finally, the M-NOP-based method was successfully used to determine 5-NDZs in milk samples. The M-NOP is expected to present promising application in the extraction and quantitative analysis of other compounds.

Nitrogen-Rich Porous Organic Polyamines for Stabilization of Highly Dispersed Metal Nanoparticles and Catalytic Application

Nitrogen-rich triazine-based porous organic polyamines (POPa) synthesized via a one-step polycondensation of melamine and 4,4',4''-(1,3,5-triazine-2,4,6-triyl)tribenzaldehyde is employed to synthesize Au and Pd nanoparticles well-dispersed on POPa. The as-prepared POPa-supported Au NPs and Pd NPs (AuNPs@POPa, PdNPs@POPa) with a narrow size distribution show remarkable catalytic activity for the reduction of nitrobenzene compounds and organic dyes and the Suzuki-Miyaura coupling reaction, respectively. Benefitting from POPa the AuNPs@POPa and PdNPs@POPa catalysts can be readily recovered and reused almost without loss of activity. The nitrogen-rich porous organic polyamines provide great opportunities to prepare functional metal nanocatalysts with potential in the heterogeneous catalysis field.

The Counterion Effect of Imidazolium-Type Poly(ionic liquid) Brushes on Carbon Dioxide Adsorption

Imidazolium-based poly(ionic liquid) brushes were attached to spherical silica nanoparticles bearing various functionalities by using a surface-initiated atom transfer radical polymerization ("grafting from" technique). A temperature-programmed desorption process was applied to evaluate and analyze the carbon dioxide adsorption performance of the synthesized polymer brushes. The confined structure of the surface-attached polymer chains facilitates gas transport and adsorption, leading to an enhanced adsorption capacity of carbon dioxide molecules compared with pure polymer powders. Temperature-programmed desorption profiles of the synthesized polymer brushes after carbon dioxide adsorption reveal that the substituent groups on the nitrogen atom at the 3-position of the imidazole ring, as well as the associated anions significantly affect the adsorption capacity of functionalized poly(ionic liquid) brushes. Of the tested samples, amine-functionalized poly(ionic liquid) brushes associated with hexafluorophosphate ions exhibit the highest carbon dioxide adsorption capacity of 2.56 mmol g^-1 (112.64 mg g^-1 ) at 25 °C under a carbon dioxide partial pressure of 0.2 bar.

Cost-effective preparation of microporous polymers from formamide derivatives and adsorption of CO2 under dry and humid conditions

Nitrogen-rich microporous polymers are prepared via a catalyst-free polymerization reaction using formamide derivatives as monomers, which exhibit outstandingly high CO₂/N₂ selectivity up to 151 and 173 at 273 K under dry and humid conditions, respectively.

Building metal-functionalized porous carbons from microporous organic polymers for CO2 capture and conversion under ambient conditions

Metal-functionalized porous carbons derived from microporous organic polymers remain highly desired for their intriguing physical and chemical properties.

Fluorescent porous organic polymers

Porous organic polymers (POPs), which are built from pure organic building blocks through strong covalent bonds, are intriguing platforms with multiple functionalities.

Synthesis and Morphology Evolution of Ultrahigh Content Nitrogen-Doped, Micropore-Dominated Carbon Materials as High-Performance Supercapacitors

Nitrogen-doped carbon-based materials including nanocarbons, graphene, and conductive polymers are impressive as supercapacitor electrodes. However, ultrahigh nitrogen contents, micropore dominated, and morphology evolving carbonaceous electrodes have not achieved until now which are crucial for supercapacitor. Herein, we prepare a novel fumaronitrile (FUM) derived covalent triazine framework (FUM-CTF) and activated it by using KOH at different temperatures to obtain the corresponding carbon materials, which were used as supercapacitor electrode materials. Specially, the FUM-700 (sample activated at 700 °C) possesses an excellent specific capacitance of 400 F g^-1 at a current density of 1 A g^-1 and considerable energy density over 18 Wh kg^-1 in KOH (6 m) aqueous electrolyte. In addition, this electrode shows 260 F g^-1 at a current density of 20 A g^-1 for charge/discharge operation. Furthermore, the FUM-700 electrode demonstrates extraordinary electrochemical stability with 97 % retention after 10 000 cycles at 10 A g^-1 . Ultrahigh nitrogen contents, the microporous structure, and the inner nanoparticle morphology work in concert to contribute to the superior electrochemical performance of FUM-700. Our work might give some hints to help design other high-performance nitrogen-containing supercapacitor electrode materials.

Functionalized Covalent Triazine Frameworks for Effective CO2 and SO2 Removal

Building novel frameworks as sorbents remains a highly significant target for key environmental issues such as CO₂ or SO₂ emissions from coal-fired power plants. Here, we report the construction and tunable pore structure as well as gas adsorption properties of hierarchically porous covalent triazine-based frameworks (CTF-CSUs) functionalized by appended carboxylic acid/sodium carboxylate groups. The densely integrated functionalities on the pore walls bestow strong affinity to the as-made networks toward guest acid gases, in spite of their moderate Brunauer-Emmett-Teller surface areas. With abundant microporosity and integrated carboxylic acid groups, our frameworks deliver strong affinity toward CO₂ with considerably high enthalpy (up to 44.6 kJ/mol) at low loadings. Moreover, the sodium carboxylate-anchored framework (termed as CTF-CSU41) shows an exceptionally high uptake of SO₂ up to 6.7 mmol g^-1 (42.9 wt %) even under a low SO₂ partial pressure of 0.15 bar (298 K), representing the highest value for a scrubbing material reported to date. Significantly, such pore engineering could pave the way to broad applications of porous organic polymers.