Amorphous Salts Solid Dispersions of Celecoxib: Enhanced Biopharmaceutical Performance and Physical Stability

Nucleotides as new co-formers in co-amorphous systems: Enhanced dissolution rate, water solubility and physical stability

Developing co-amorphous systems is an attractive strategy to improve the dissolution rate of poorly water-soluble drugs. Various co-formers have been investigated. However, previous studies revealed that it is a challenge to develop satisfied acidic co-formers, e.g., acidic amino acids showed much poorer co-former properties than neutral and basic amino acids. Only a few acidic co-formers have been reported, such as aspartic acid, glutamic acid, and some other organic acids. Thus, this study aims to explore the possibility of adenosine monophosphate and adenosine diphosphate used as acidic co-formers. Mebendazole, celecoxib and tadalafil were used as the model drugs. The drug-co-former co-amorphous systems were prepared via ball milling and confirmed using XRPD. The dissolution study suggested that the solubility and dissolution rate of the drug-co-formers systems were increased significantly compared to the corresponding crystalline and amorphous drugs. The stability study revealed that using the two nucleotides as co-formers enhanced the physical stability of pure amorphous drugs. Molecular interactions were observed in MEB-co-former and TAD-co-former systems and positively affected the pharmaceutical performance of the investigated co-amorphous systems. In conclusion, the two nucleotides could be promising potential acidic co-formers for co-amorphous systems.

Generality of Enhancing the Dissolution Rates of Free Acid Amorphous Solid Dispersions by the Incorporation of Sodium Hydroxide

The incorporation of a counterion into an amorphous solid dispersion (ASD) has been proven to be an attractive strategy to improve the drug dissolution rate. In this work, the generality of enhancing the dissolution rates of free acid ASDs by incorporating sodium hydroxide (NaOH) was studied by surface-area-normalized dissolution. A set of diverse drug molecules, two common polymer carriers (copovidone or PVPVA and hydroxypropyl methylcellulose acetate succinate or HPMCAS), and two sample preparation methods (rotary evaporation and spray drying) were investigated. When PVPVA was used as the polymer carrier for the drugs in this study, enhancements of dissolution rates from 7 to 78 times were observed by the incorporation of NaOH into the ASDs at a 1:1 molar ratio with respect to the drug. The drugs having lower amorphous solubilities showed greater enhancement ratios, providing a promising path to improve the drug release performance from their ASDs. Samples generated by rotary evaporation and spray drying demonstrated comparable dissolution rates and enhancements when NaOH was added, establishing a theoretical foundation to bridge the ASD dissolution performance for samples prepared by different solvent-removal processes. In the comparison of polymer carriers, when HPMCAS was applied in the selected system (indomethacin ASD), a dissolution rate enhancement of 2.7 times by the incorporated NaOH was observed, significantly lower than the enhancement of 53 times from the PVPVA-based ASD. This was attributed to the combination of a lower dissolution rate of HPMCAS and the competition for NaOH between IMC and HPMCAS. By studying the generality of enhancing ASD dissolution rates by the incorporation of counterions, this study provides valuable insights into further improving drug release from ASD formulations of poorly water-soluble drugs.

Synergistic effect of polymers in stabilizing amorphous pretomanid through high drug loaded amorphous solid dispersion

Pretomanid (PTM), an oral antibiotic used in the treatment of adults with pulmonary extensively drug-resistant, nonresponsive multidrug-resistant tuberculosis (MDR-TB). It is a poor glass former, that shows high recrystallization tendency from the amorphous and supersaturated state, resulting in low aqueous solubility and suboptimal absorption through the gastrointestinal tract. The present investigation aimed to develop high drug loaded ternary amorphous solid dispersions (ASDs) of PTM with improved stability and enhanced biopharmaceutical performance by utilizing a combination of polymers. The polymers were comprehensively screened based on drug-polymer miscibility and saturation solubility analysis. A combination of Hydroxypropyl Methylcellulose Acetate Succinate (HPMCAS-HF) and Polyvinylpyrrolidone K-30 (PVP K-30) showed synergism in drug-polymer miscibility as evidenced through pronounced depression in the melting endotherm of PTM. The Powder X-ray Diffraction (P-XRD) diffractograms of 30% w/w PTM loaded ternary ASDs displayed the halo pattern, contrary to the binary ASDs. Drug-polymer interactions (hydrophobic forces) involved between PTM and polymers were detected through Fourier Transform Infrared Spectroscopy (FT-IR) and Nuclear Magnetic Resonance Spectroscopy (13C-NMR) which contributed to the synergistic enhancement in solubility and dissolution of ternary ASDs with sustained release over 12 h. Ternary ASDs demonstrated better in-vivo performance compared to the binary ASDs, showing a 4.63-fold increase in maximum plasma concentration. All ASDs remained stable and resisted phase separation during short-term stability studies for 3 months at ambient conditions. It was concluded that the hydrophobic and hydrophilic polymeric combination (HPMCAS-HF and PVP K-30, respectively) effectively prevented the crystallization and ensured sustained drug release with improved in-vivo absorption of PTM.

Trends in amorphous solid dispersion drug products approved by the U.S. Food and Drug Administration between 2012 and 2023

Forty-eight (48) drug products (DPs) containing amorphous solid dispersions (ASDs) have been approved by the U.S. Food and Drug Administration in the 12-year period between 2012 and 2023. These DPs comprise 36 unique amorphous drugs. Ten (10) therapeutic categories are represented, with most DPs containing antiviral and antineoplastic agents. The most common ASD polymers are copovidone (49%) and hypromellose acetate succinate (30%), while spray drying (54%) and hot melt extrusion (35%) are the most utilized manufacturing processes to prepare the ASD drug product intermediate (DPI). Tablet dosage forms are the most common, with several capsule products available. Line extensions of several DPs based on flexible oral solids and powders for oral suspension have been approved which provide patient-centric dosing to pediatric and other patient populations. The trends in the use of common excipients and film coating types are discussed. Eighteen (18) DPs are fixed-dose combinations, and some contain a mixture of amorphous and crystalline drugs. The DPs have dose/unit of amorphous drug ranging from <5 mg up to 300 mg, with the majority being ≤100 mg/unit. This review details several aspects of DPI and DP formulation and manufacturing of ASDs, as well as trends related to therapeutic category, dose, and patient-centricity.

Third Generation Solid Dispersion-Based Formulation of Novel Anti-Tubercular Agent Exhibited Improvement in Solubility, Dissolution and Biological Activity

The long treatment period and development of drug resistance in tuberculosis (TB) necessitates the discovery of new anti-tubercular agents. The drug discovery program of the institute leads to the development of an anti-tubercular lead (IIIM-019), which is an analogue of nitrodihydroimidazooxazole and exhibited promising anti-tubercular action. However, IIIM-019 displays poor aqueous solubility (1.2 µg/mL), which demands suitable dosage form for its efficient oral administration. In the present study, third generation solid dispersion-based formulation was developed to increase the solubility and dissolution of IIIM-019. The solubility profile of IIIM-019 using various polymeric carriers was determined and subsequently, PVP K-30 and P-407 were selected for preparation of binary and ternary solid dispersion. The third-generation ternary solid dispersion comprising PVP K-30 and P-407 revealed a remarkable enhancement in the aqueous solubility of IIIM-019. Physicochemical characterization of the developed formulations was done by employing FTIR spectroscopy, scanning electron microscopy, X-ray diffraction analysis, differential scanning calorimetry, and dynamic light scattering analysis. The dissolution study indicated an impressive release profile with the optimized formulation. The optimized formulation was further examined for cytotoxicity, cellular uptake, and hemolytic activity. The results indicated that the formulation had no apparent cytotoxicity on Caco-2 cells and was non-hemolytic in nature. Moreover, the optimized formulation showed significantly improved anti-tubercular activity compared to the native molecule. These findings showed that the developed third generation ternary solid dispersion could be a promising option for the oral delivery of investigated anti-tubercular molecule.

Evaluation of microstructure, dissolution rate, and oral bioavailability of paclitaxel poloxamer 188 solid dispersion

Poor solubility is a major challenge for enhancing the oral bioavailability and clinical application of many drugs, including the broad-spectrum chemotherapy drug paclitaxel (PTX). A practical approach to improving the solubility of insoluble drugs is through the use of solid dispersion (SD). This study aimed to investigate the potential of the triblock copolymer, poloxamer 188 (P188), as a carrier for preparing solid dispersion of paclitaxel using spray drying technology. We systematically studied its microstructure, dissolution behavior in vitro, and pharmacokinetics. Our findings demonstrate that PTX exists in an amorphous state in copolymer composed of polyoxyethylene-polyoxypropylene-polyoxyethylene (PEO-PPO-PEO) P188, with stronger miscibility with hydrophobic PPO segments. All three in vitro dissolution models revealed that the release rate of drugs in SD was significantly higher compared to that of physical mixtures (PM) as well as raw drugs. Furthermore, our pharmacokinetic results showed that the area under the curve(AUC) of PTX in SD was 6 times higher than that of active pharmaceutical ingredient(API), 4.5 times higher than PM, and the highest blood drug concentration (Cmax) reached 357.51 ± 125.54 (ng/mL), approximately 20 times higher than API. Overall, our findings demonstrate that the dissolution rate of amorphous PTX in SD significantly improves, effectively enhancing the oral bioavailability of PTX.

Influence of Intermolecular Interactions on Crystallite Size in Crystalline Solid Dispersions

Crystalline solid dispersions (CSDs) represent a thermodynamically stable system capable of effectively reducing the crystallite size of drugs, thereby enhancing their solubility and bioavailability. This study uses flavonoid drugs with the same core structures but varying numbers of hydroxyl groups as model drugs and poloxamer 188 as a carrier to explore the intrinsic relationships between drug-polymer interactions, crystallite size, and in vitro dissolution behavior in CSDs. Initially, we investigate the interactions between flavonoid drugs and P188 by calculating Hansen solubility parameters, determination of Flory-Huggins interaction parameters, and other methods. Subsequently, we explore the crystallization kinetics of flavonoid drugs and P188 in CSD systems using polarized optical microscopy and powder X-ray diffraction. We monitor the domain size and crystallite size of flavonoids in CSDs through powder X-ray diffraction and a laser-particle-size analyzer. Finally, we validate the relationship between crystallite size and in vitro dissolution behavior through powder dissolution. The results demonstrate that, as the number of hydroxyl groups increases, the interactions between drugs and polymers become stronger, making drug crystallization in the CSD system less likely. Consequently, reductions in crystalline domain size and crystallite size become more pronounced, leading to a more significant enhancement in drug dissolution.

Comparative analysis of drug-salt-polymer interactions by experiment and molecular simulation improves biopharmaceutical performance

The propensity of poorly water-soluble drugs to aggregate at supersaturation impedes their bioavailability. Supersaturated amorphous drug-salt-polymer systems provide an emergent approach to this problem. However, the effects of polymers on drug-drug interactions in aqueous phase are largely unexplored and it is unclear how to choose an optimal salt-polymer combination for a particular drug. Here, we describe a comparative experimental and computational characterization of amorphous solid dispersions containing the drug celecoxib, and a polymer, polyvinylpyrrolidone vinyl acetate (PVP-VA) or hydroxypropyl methylcellulose acetate succinate, with or without Na+/K+ salts. Classical models for drug-polymer interactions fail to identify the best drug-salt-polymer combination. In contrast, more stable drug-polymer interaction energies computed from molecular dynamics simulations correlate with prolonged stability of supersaturated amorphous drug-salt-polymer systems, along with better dissolution and pharmacokinetic profiles. The celecoxib-salt-PVP-VA formulations exhibit excellent biopharmaceutical performance, offering the prospect of a low-dosage regimen for this widely used anti-inflammatory, thereby increasing cost-effectiveness, and reducing side-effects.

Effect of Deep Eutectic System (DES) on Oral Bioavailability of Celecoxib: In Silico, In Vitro, and In Vivo Study

Different deep eutectic systems (DES) of choline chloride (CC)-urea (UA) (1:2), CC-glycerol (GLY) (1:2), CC-malonic acid (MA) (1:1), and CC-ascorbic acid (AA) (2:1) were generated and characterized by polarized light microscope (PLM) and Fourier transform infrared spectroscope (FTIR). The equilibrium solubility of celecoxib (CLX) in DES was compared to that in deionized water. The CC-MA (1:1) system provided ~10,000 times improvement in the solubility of CLX (13,114.75 µg/g) and was used for the generation of the CLX-DES system. The latter was characterized by PLM and FTIR to study the microstructure and intermolecular interaction between the CLX and CC-MA (1:1) DES. FTIR demonstrated the retention of the chemical structure of CLX. In vitro drug release studies in FaSSIF initially demonstrated high supersaturation, which decreased by ~2 fold after 2 h. Density functional theory (DFT)-based calculations provided a molecular-level understanding of enhanced solubility. Gibbs free energy calculations established the role of the strongest binding of CLX with CC and MA. A phase solubility study highlighted the role of hydrotropy-induced solubilization of the CLX-DES system. Animal pharmacokinetic studies established 2.76 times improvement in Cmax, 1.52 times reduction in tmax, and 1.81 times improvement in AUC0-∞. The overall results demonstrated the potential of developing a DES-based supersaturating drug-delivery system for pharmaceutical loading of drugs having solubility and dissolution rate-limited oral bioavailability.

Effects of Additives on the Physical Stability and Dissolution of Polymeric Amorphous Solid Dispersions: a Review

Polymeric amorphous solid dispersion (ASD) is a popular approach for enhancing the solubility of poorly water-soluble drugs. However, achieving both physical stability and dissolution performance in an ASD prepared with a single polymer can be challenging. Therefore, a secondary excipient can be added. In this paper, we review three classes of additives that can be added internally to ASDs: (i) a second polymer, to form a ternary drug-polymer-polymer ASD, (ii) counterions, to facilitate in situ salt formation, and (iii) surfactants. In an ASD prepared with a combination of polymers, each polymer exerts a unique function, such as a stabilizer in the solid state and a crystallization inhibitor during dissolution. In situ salt formation in ASD usually leads to substantial increases in the glass transition temperature, contributing to improved physical stability. Surfactants can enhance the wettability of ASD particles, thereby promoting rapid drug release. However, their potential adverse effects on physical stability and dissolution, resulting from enhanced molecular mobility and competitive molecular interaction with the polymer, respectively, warrant careful consideration. Finally, we discuss the impact of magnesium stearate and inorganic salts, excipients added externally upon downstream processing, on the solid-state stability as well as the dissolution of ASD tablets.

Exploring the Solubility and Bioavailability of Sodium Salt and Its Free Acid Solid Dispersions of Dolutegravir

Amorphous salt solid dispersion (ASSD) of Dolutegravir amorphous salt (DSSD) was generated using quench cooling and compared to its Dolutegravir free acid solid dispersion (DFSD) to improve the solubility and bioavailability. Soluplus (SLP) was used as a polymeric carrier in both solid dispersions. The prepared DSSD and DFSD, physical mixtures, and individual compounds were characterized by employing DSC, XRPD, and FTIR to assess the formation of the single homogenous amorphous phase and the existence of intermolecular interactions. Partial crystallinity was observed for DSSD, unlike DFSD, which is completely amorphous. No intermolecular interactions were observed between the Dolutegravir sodium (DS)/Dolutegravir free acid (DF) and SLP from the FTIR spectra of DSSD and DFSD. Both DSSD and DFSD improved the solubility of Dolutegravir (DTG) to 5.7 and 4.54 folds compared to the pure forms. Similarly, drug release from DSSD and DFSD was 2 and 1.5 folds higher than that in the pure form, owing to the rapid dissolution of the drug from the formulations. The permeability of DSSD and DFSD was estimated using the dialysis membrane, which enhanced the DTG permeability. The improvement in in vitro studies was translated into in vivo pharmacokinetic profiles of DSSD and DFSD, where 4.0 and 5.6 folds, respectively, improved the C_max of DTG.

Fabrication of Celecoxib PVP Microparticles Stabilized by Gelucire 48/16 via Electrospraying for Enhanced Anti-Inflammatory Action

Electrospraying (ES) technology is considered an efficient micro/nanoparticle fabrication technique with controlled dimensions and diverse morphology. Gelurice® 48/16 (GLR) has been employed to stabilize the aqueous dispersion of Celecoxib (CXB) for enhancing its solubility and oral bioavailability. Our formula is composed of CXB loaded in polyvinylpyllodine (PVP) stabilized with GLR to formulate microparticles (MPs) (CXB-GLR-PVP MPs). CXB-GLR-PVP MPs display excellent in vitro properties regarding particle size (548 ± 10.23 nm), zeta potential (−20.21 ± 2.45 mV), and drug loading (DL, 1.98 ± 0.059 mg per 10 mg MPs). CXB-GLR-PVP MPs showed a significant (p < 0.05) higher % cumulative release after ten minutes (50.31 ± 4.36) compared to free CXB (10.63 ± 2.89). CXB exhibited good dispersibility, proved by X-ray diffractometry (XRD), adequate compatibility of all components, confirmed by Fourier-Transform Infrared Spectroscopy (FTIR), and spherical geometry as revealed in scanning electron microscopy (SEM). Concerning our anti-inflammatory study, there was a significant decrease in the scores of the inflammatory markers’ immunostaining in the CXB-GLR-PVP MPs treated group. Also, the amounts of the oxidative stress biomarkers, as well as mRNA expression of interleukins (IL-1β and IL-6), considerably declined (p < 0.05) in CXB-GLR-PVP MPs treated group alongside an enhancement in the histological features was revealed. CXB-GLR-PVP MPs is an up-and-coming delivery system that could be elucidated in future clinical investigations.

Selecting Counterions to Improve Ionized Hydrophilic Drug Encapsulation in Polymeric Nanoparticles

Hydrophobic ion pairing (HIP) can successfully increase the drug loading and control the release kinetics of ionizable hydrophilic drugs, addressing challenges that prevent these molecules from reaching the clinic. Nevertheless, polymeric nanoparticle (PNP) formulation development requires trial-and-error experimentation to meet the target product profile, which is laborious and costly. Herein, we design a preformulation framework (solid-state screening, computational approach, and solubility in PNP-forming emulsion) to understand counterion-drug-polymer interactions and accelerate the PNP formulation development for HIP systems. The HIP interactions between a small hydrophilic molecule, AZD2811, and counterions with different molecular structures were investigated. Cyclic counterions formed amorphous ion pairs with AZD2811; the 0.7 pamoic acid/1.0 AZD2811 complex had the highest glass transition temperature (T_g; 162 °C) and the greatest drug loading (22%) and remained as phase-separated amorphous nanosized domains inside the polymer matrix. Palmitic acid (linear counterion) showed negligible interactions with AZD2811 (crystalline-free drug/counterion forms), leading to a significantly lower drug loading despite having similar log P and pK_a with pamoic acid. Computational calculations illustrated that cyclic counterions interact more strongly with AZD2811 than linear counterions through dispersive interactions (offset π-π interactions). Solubility data indicated that the pamoic acid/AZD2811 complex has a lower organic phase solubility than AZD2811-free base; hence, it may be expected to precipitate more rapidly in the nanodroplets, thus increasing drug loading. Our work provides a generalizable preformulation framework, complementing traditional performance-indicating parameters, to identify optimal counterions rapidly and accelerate the development of hydrophilic drug PNP formulations while achieving high drug loading without laborious trial-and-error experimentation.

Molecular interactions of niclosamide with hydroxyethyl cellulose in binary and ternary amorphous solid dispersions for synergistic enhancement of water solubility and oral pharmacokinetics in rats

The cellulose-based polymers are extensively employed in oral formulations for addressing ADMET issues of API. Herein, we report the synergistic effect of hydroxyethyl cellulose in solubility/dissolution enhancement of BCS class II, anthelmintic drug niclosamide. The low solubility and poor oral bioavailability are the primary reasons for its high daily dose. The amorphous solid dispersions (ASDs) developed herein demonstrated reproducible solubility and dissolution enhancement in smaller-to-pilot batches. The significant boost in niclosamide solubility in HEC-based binary SD was rationalized as a result of intermolecular H-bonding as indicated by in-silico studies and further supported by characterization data. HEC is plausibly inhibiting the precipitation of drug and thereby enabling high dissolution and permeation across the membrane. The comparative oral pharmacokinetics in Wistar rats at 25 mg/kg provided 4.4-fold higher plasma exposure of niclosamide in SD formulation SB-ASD-N2 over the plain drug. The results presented herein warrant validation of this ASD under clinical settings. Teaser Amorphous solid dispersions of niclosamide.

Hydrochloride Salt of the GABAkine KRM-II-81

Imidazodiazepine (5-(8-ethynyl-6-(pyridin-2-yl)-4H-benzo[f]imidazole[1,5-α][1,4]diazepin-3-yl) oxazole or KRM-II-81) is a potentiator of GABAA receptors (a GABAkine) undergoing preparation for clinical development. KRM-II-81 is active against many seizure and pain models in rodents, where it exhibits improved pharmacological properties over standard-of-care agents. Since salts can be utilized to create opportunities for increased solubility, enhanced absorption, and distribution, as well as for efficient methods of bulk synthesis, a hydrochloride salt of KRM-II-81 was prepared. KRM-II-81·HCl was produced from the free base with anhydrous hydrochloric acid. The formation of the monohydrochloride salt was confirmed by X-ray crystallography, as well as 1H NMR and 13C NMR analyses. High water solubility and a lower partition coefficient (octanol/water) were exhibited by KRM-II-81·HCl as compared to the free base. Oral administration of either KRM-II-81·HCl or the free base resulted in high concentrations in the brain and plasma of rats. Oral dosing in mice significantly increased the latency to both clonic and tonic convulsions and decreased pentylenetetrazol-induced lethality. The increased water solubility of the HCl salt enables intravenous dosing and the potential for higher concentration formulations compared with the free base without impacting anticonvulsant potency. Thus, KRM-II-81·HCl adds an important new compound to facilitate the development of these imidazodiazepines for clinical evaluation.