Metal-Enhanced Fluorescence by Bifunctional Au Nanoparticles for Highly Sensitive and Simple Detection of Proteolytic Enzyme

Proteases, a powerful biochemical tool in the service of medicine, clinical and pharmaceutical

Proteases, enzymes that hydrolyze peptide bonds, have various applications in medicine, clinical applications, and pharmaceutical development. They are used in cancer treatment, wound debridement, contact lens cleaning, prion degradation, biofilm removal, and fibrinolytic agents. Proteases are also crucial in cardiovascular disease treatment, emphasizing the need for safe, affordable, and effective fibrinolytic drugs. Proteolytic enzymes and protease biosensors are increasingly used in diagnostic and therapeutic applications. Advanced technologies, such as nanomaterials-based sensors, are being developed to enhance the sensitivity, specificity, and versatility of protease biosensors. These biosensors are becoming effective tools for disease detection due to their precision and rapidity. They can detect extracellular and intracellular proteases, as well as fluorescence-based methods for real-time and label-free detection of virus-related proteases. The active utilization of proteolytic enzymatic biosensors is expected to expand significantly in biomedical research, in-vitro model systems, and drug development. We focused on journal articles and books published in English between 1982 and 2024 for this study.

Acidity-activated aggregation and accumulation of self-complementary zwitterionic peptide-decorated gold nanoparticles for photothermal biofilm eradication

Drug-resistant biofilm infection is an extremely serious clinical problem, that easily leads to failure of antibiotic treatment. Although gold nanoparticles (AuNPs) as photothermal agents have been widely used in biofilm eradication, there are still challenges to be addressed, such as insignificantly redshifted absorption and slow assembly process of aggregated AuNPs. Herein, we developed an acidity-activated dispersion-to-aggregation transition to enhance the accumulation of self-complementary zwitterionic peptide-decorated AuNPs for photothermal eradication of drug-resistant biofilm infections. AuNPs were decorated with self-complementary zwitterionic peptides (ZP1 and ZP2) coupled with pH-sensitive anhydride (DMA) and pH-insensitive anhydride (SA), respectively. ZP2-decorated AuNPs with DMA modification (AuNP@ZP2(DMA)) exhibited prolonged blood circulation and enhanced accumulation in acidic biofilm microenvironment. Moreover, the electrostatic attraction between self-complementary ligands drove AuNPs to form closely packed aggregates with strong near-infrared absorption, leading to in vivo photoacoustic imaging ability and photothermal effect against drug-resistant bacteria and fungus, as well as microbial biofilms. AuNP@ZP2(DMA) with longer charge domains and a polyethylene glycol oligomer spacer showed greater photothermal antimicrobial and biofilm resistance in vitro and in vivo. This study develops an innovative acidity-activated AuNP photothermal agent, which provides an effective approach for treatment of biofilm infections.

Temperature-sensitive metal-enhanced fluorescence and plasmon resonance energy transfer

Experimental decoupling of the effects of plasmon resonance energy transfer (PRET) and metal-enhanced fluorescence (MEF) within the same nanometal-fluorophore pair is fascinating but challenging. In this study, we presented a possible solution for this by coating plasmonic Au nanoparticles (AuNPs) with temperature-sensitive poly(N-isopropylacrylamide) (pNIPAM) shells and R6G hybrids, termed the Au@p-R nanoplatform, which could reversibly adjust the separation between dyes and the AuNP surface, enabling an ON/OFF switch between MEF and PRET. In our optimization process, we discovered that 20 kDa of pNIPAM causes an MEF effect owing to an appropriate shrinking distance of 6.86 ± 0.85 nm. This dual-model nanoplatform exhibits great potential for tracking temperature-dependent transitions.

Insulator-on-Conductor Fouling Amplifies Aqueous Electrolysis Rates

The chemical industry is a major consumer of fossil fuels. Several chemical reactions of practical value proceed with the gain or loss of electrons, opening a path to integrate renewable electricity into chemical manufacturing. However, most organic molecules have low aqueous solubility, causing green and cheap electricity-driven reactions to suffer from intrinsically low reaction rates in industry's solvent of choice: water. Here, we show that a strategic, partial electrode fouling with hydrophobic insulators (oils and plastics) offsets kinetic limitations caused by poor reactant solubility, opening a new path for the direct integration of renewable electricity into the production of commodity chemicals. Through electrochemiluminescence microscopy, we reveal for the oxidation of organic reactants up to 6-fold reaction rate increase at the "fouled" oil-electrolyte-electrode interface relative to clean electrolyte-electrode areas. Analogously, electrodes partially masked (fouled) with plastic patterns, deposited either photolithographically (photoresists) or manually (inexpensive household glues and sealants), outperform clean electrodes. The effect is not limited to reactants of limited water solubility, and, for example, net gold electrodeposition rates are up to 22% larger at fouled than clean electrodes. In a system involving a surface-active reactant, rate augmentation is driven by the synergy between insulator-confined reactant enrichment and insulator-induced current crowding, whereas only the latter and possibly localized decrease in iR drop near the insulator are relevant in a system composed of non-surface-active species. Our counterintuitive electrode design enhances electrolysis rates despite the diminished area of intimate electrolyte-electrode contact and introduces a new path for upscaling aqueous electrochemical processes.

Metal-enhanced fluorescence biosensor integrated in capillary flow-driven microfluidic cartridge for highly sensitive immunoassays

Point-of-care testing (POCT) for low-concentration protein biomarkers remains challenging due to limitations in biosensor sensitivity and platform integration. This study addresses this gap by presenting a novel approach that integrates a metal-enhanced fluorescence (MEF) biosensor within a capillary flow-driven microfluidic cartridge (CFMC) for the ultrasensitive detection of the Parkinson's disease biomarker, aminoacyl-tRNA synthetase complex interacting multi-functional protein 2 (AIMP-2). Crucial point to this approach is the orientation-controlled immobilization of capture antibody on a nanodimple-structured MEF substrate within the CFMC. This strategy significantly enhances fluorescence signals without quenching, enabling accurate quantification of low-concentration AIMP-2 using a simple digital fluorescence microscope with a light-emitting diode excitation source and a digital camera. The resulting platform exhibits exceptional sensitivity, achieving a limit of detection in the pg/mL range for AIMP-2 in human serum. Additionally, the CFMC design incorporates a capillary-driven passive sample transport mechanism, eliminating the need for external pumps and further simplifying the detection process. Overall, this work demonstrates the successful integration of MEF biosensing with capillary microfluidics for point-of-care applications.

Ratiometric fluorescent biosensor for detection and real-time imaging of nitric oxide in mitochondria of living cells

Nitric oxide (NO), a ubiquitous gaseous messenger, plays critical roles in various pathological and physiological progresses. The abnormal levels of NO in organisms are closely related to a large number of maladies. Mitochondria are the main area that produce NO in mammalian cells. Thus, detecting and real-time imaging of NO in mitochondria is of great significance for exploring the biological functions of NO. Herein, a ratiometric fluorescent biosensor (Mito-GNP-pNO520) is developed for sensitive and selective detection and real-time imaging of NO in mitochondria of living cells. The detection is achieved through the fluorescence off-on response of Mito-GNP-pNO520 toward NO. This biosensor shows excellent characteristics, such as high sensitivity toward NO with a low detection limit of 0.25 nM, exclusive selectivity to NO without interference from other substances, good biological stability and low cytotoxicity. More importantly, the biosensor is specifically located in mitochondria, enabling the detection and real-time imaging of endogenous and exogenous NO in mitochondria of living cells. Therefore, our biosensor offers a new approach for dynamic detecting and real-time imaging of NO in subcellular organelles, providing an opportunity to explore new biological effects of NO.

A novel dual-mode aptasensor based on a multiple amplification system for ultrasensitive detection of lead ions using fluorescence and surface-enhanced Raman spectroscopy

In this work, we develop a dual recycling amplification aptasensor for sensitive and rapid detection of lead ions (Pb2+) using fluorescence and surface-enhanced Raman scattering (FL-SERS). The aptasensor allows targeted cleavage of substrates through specifically binding with the Pb2+-dependent aptamer (M-PS2.M). Ultrasensitive detection of trace Pb2+ has been achieved using an enzyme-free nonlinear hybridization chain reaction (HCR) and the FL-SERS technique. The lower limit of detection (LOD = 3σ/k) is 0.115 pM in FL mode and 1.261 fM in SERS mode. The aptasensor is characterized by high reliability and specificity, among other things, to distinguish Pb2+ from other metal ions. In addition, the aptasensor can detect Pb2+ in actual water with good recovery. Compared with the single-mode aptasensor, the dual-mode aptasensor is characterized by high reliability, an extensive detection range, and high specificity.

Simultaneous detection and removal of mercury (II) using multifunctional fluorescent materials

Environmental problems caused by mercury ions are increasing due to growing industrialization, poor enforcement, and inefficient pollutant treatment. Therefore, detecting and removing mercury from the ecological chain is of utmost significance. Currently, a wide range of small molecules and nanomaterials have made remarkable progress in the detection, detoxification, adsorption, and removal of mercury. In this review, we summarized the recent advances in the design and construction of multifunctional materials, detailed their sensing and removing mechanisms, and discussed with emphasis the advantages and disadvantages of different types of sensors. Finally, we elucidated the problems and challenges of current multifunctional materials and further pointed out the direction for the future development of related materials. This review is expected to provide a guideline for researchers to establish a robust strategy for the detection and removal of mercury ionsin the environment.

Application of nanotechnology in bladder cancer diagnosis and therapeutic drug delivery

Bladder cancer (BC) is one of the most common malignant tumors in the urinary system, and its high recurrence rate is a great economic burden to patients. Traditional diagnosis and treatment methods have the disadvantages of insufficient targeting, obvious side effects and low sensitivity, which seriously limit the accurate diagnosis and efficient treatment of BC. Due to their small size, easy surface modification, optical properties such as plasmon resonance, and surface enhanced Raman scattering, good electrical conductivity and photothermal conversion properties, nanomaterials have great potential application value in the realization of specific diagnosis and targeted therapy of BC. At present, the application of nanomaterials in the diagnosis and treatment of BC is attracting great attention and achieving rich research results. Therefore, this paper summarizes the recent research on nanomaterials in the diagnosis and treatment of BC, clarifies the existing advantages and disadvantages, and provides theoretical guidance for promoting the accurate diagnosis and efficient treatment of BC.

Plasmon-enhanced fluorescence for ellagic acid detection based on surface structure of gold nanoparticles

Ellagic acid (EA), as a natural polyphenolic acid, is considered a naturally occurring inhibitor of carcinogenesis. Herein, we developed a plasmon-enhanced fluorescence (PEF) probe for EA detection based on silica-coated gold nanoparticles (Au NPs). A silica shell was designed to control the distance between silica quantum dots (Si QDs) and Au NPs. The experimental results indicated that an 8.8-fold fluorescence enhancement was obtained compared with the original Si QDs. Three-dimensional finite-difference time-domain (3D-FDTD) simulations further demonstrated that the local electric field enhancement around Au NPs led to the fluorescence enhancement. In addition, the fluorescent sensor was applied for the sensitive detection of EA with a detection limit of 0.14 μM. It can be used to detect EA in pomegranate rind with a recovery rate of 100.26-107.93%. It can also be applied to the analysis of other substances by changing the identification substances. These experimental results indicated that the probe provides a good option for clinical analysis and food safety.

Ps-Pt nanozyme-based synergistic signal amplification biosensor for highly sensitive colorimetric detection of protein

Immunosorbent assay is one of the most popular immunological screening techniques which has been widely used for the clinical diagnosis of alpha-fetoprotein (AFP). While traditional immunosorbent assay (ELISA) suffers from low detection sensitivity due to its low intensity of colorimetric signal. To improve the sensitivity of AFP detection, we developed a new and sensitive immunocolorimetric biosensor by combining Ps-Pt nanozyme with terminal deoxynucleotidyl transferase (TdT)-mediated polymerization reaction. The determination of AFP was achieved by measuring the visual color intensity produced by the catalytic oxidation reaction of the 3,3',5,5'-tetramethylbenzidine (TMB) solution with Ps-Pt and horseradish peroxidase (HRP). Owing to the synergistic catalysis of Ps-Pt and horseradish peroxidase HRP enriched in polymerized amplification products, this biosensor exhibited a significant color change within 25 s in the presence of 10-500 pg/mL AFP. This proposed method allowed for the specific detection of AFP with a detection limit of 4.30 pg/mL and even 10 pg/mL target protein could be distinguished clearly by visual observation. Furthermore, this biosensor could be applied to analysis of AFP in the complex sample and could be easily extended to the detection of other proteins.

Enzymatic Electrochemical/Fluorescent Nanobiosensor for Detection of Small Chemicals

The detection of small molecules has attracted enormous interest in various fields, including the chemical, biological, and healthcare fields. In order to achieve such detection with high accuracy, up to now, various types of biosensors have been developed. Among those biosensors, enzymatic biosensors have shown excellent sensing performances via their highly specific enzymatic reactions with small chemical molecules. As techniques used to implement the sensing function of such enzymatic biosensors, electrochemical and fluorescence techniques have been mostly used for the detection of small molecules because of their advantages. In addition, through the incorporation of nanotechnologies, the detection property of each technique-based enzymatic nanobiosensors can be improved to measure harmful or important small molecules accurately. This review provides interdisciplinary information related to developing enzymatic nanobiosensors for small molecule detection, such as widely used enzymes, target small molecules, and electrochemical/fluorescence techniques. We expect that this review will provide a broad perspective and well-organized roadmap to develop novel electrochemical and fluorescent enzymatic nanobiosensors.

Recent Advances in Biomolecular Detection Based on Aptamers and Nanoparticles

The fast, accurate detection of biomolecules, ranging from nucleic acids and small molecules to proteins and cellular secretions, plays an essential role in various biomedical applications. These include disease diagnostics and prognostics, environmental monitoring, public health, and food safety. Aptamer recognition (DNA or RNA) has gained extensive attention for biomolecular detection due to its high selectivity, affinity, reproducibility, and robustness. Concurrently, biosensing with nanoparticles has been widely used for its high carrier capacity, stability and feasibility of incorporating optical and catalytic activity, and enhanced diffusivity. Biosensors based on aptamers and nanoparticles utilize the combination of their advantages and have become a promising technology for detecting of a wide variety of biomolecules with high sensitivity, reliability, specificity, and detection speed. Via various sensing mechanisms, target biomolecules have been quantified in terms of optical (e.g., colorimetric and fluorometric), magnetic, and electrical signals. In this review, we summarize the recent advances in and compare different aptamer-nanoparticle-based biosensors by nanoparticle types and detection mechanisms. We also share our views on the highlights and challenges of the different nanoparticle-aptamer-based biosensors.

Synthesis and luminescence monitoring of iridium(III) complex-functionalized gold nanoparticles and their application for determination of gold(III) ions

A new method is presented for the one-step synthesis and real-time monitoring of iridium(III) complex-functionalized AuNPs from the precursor gold(III) chloride (AuCl₃). The functionalized AuNPs with an average size of 8 - 20 nm were obtained by the reduction of Au³⁺ ions by the alkyne group of iridium(III) complexes, which was accompanied by the anchoring iridium(III) complexes on the surface of the nanoparticles. Meanwhile, the luminescence of the iridium(III) complexes was effectively quenched due to distance-dependent fluorescence quenching by AuNPs, thereby enabling luminescence monitoring of the formation process of the functionalized AuNPs and obtaining scattering information and spectral information in real time. Moreover, this method was applied to the determination of Au³⁺ ions in buffer with a limit of detection of 0.38 μM at 700 nm in luminescence mode, while the detection limit for absorbance was 10.04 μM. Importantly, the multimodal detection strategy alleviates interference from other metal ions. Furthermore, the iridium(III) alkyne complexes were capable of imaging mitochondrial Au³⁺ ions in living cells. Taken together, this work opens a new avenue for convenient synthesis and monitoring formation of functionalized AuNPs, and also provides a tool for selective determination of Au³⁺ ions in solution and in cellulo.

Fluorophore-Decorated Mie Resonant Silicon Nanosphere for Scattering/Fluorescence Dual-Mode Imaging

Inorganic nanoparticles with multiple functions have been attracting attention as multimodal nanoprobes in bioimaging, biomolecule detection, and medical diagnosis and treatment. A drawback of conventional metallic nanoparticle-based nanoprobes is the Ohmic losses that lead to fluorescence quenching of attached molecules and local heating under light irradiation. Here, metal-free nanoprobes capable of scattering/fluorescence dual-mode imaging are developed. The nanoprobes are composed of a silicon nanosphere core having efficient Mie scattering in the visible to near infrared range and a fluorophore doped silica shell. The dark-field scattering and photoluminescence images/spectra for nanoprobes made from different size silicon nanospheres and different kinds of fluorophores are studied by single particle spectroscopy. The fluorescence spectra are strongly modified by the Mie modes of a silicon nanosphere core. By comparing scattering and fluorescence spectra and calculated Purcell factors, the fluorescence enhancement factor is quantitatively discussed. In vitro scattering/fluorescence imaging studies on human cancer cells demonstrate that the developed nanoparticles work as scattering/fluorescence dual-mode imaging nanoprobes.

Single-Molecule Evaluation of the SARS-CoV-2 Nucleocapsid Protein Using Gold Particle-in-a-Frame Nanostructures Enhanced Fluorescent Assay

Ultrasensitive evaluation of low-abundance analytes, particularly with limits approaching a single molecule, is a key challenge in the design of an assay for profiling severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) antigen. Herein, we report an aptamer claw strategy for directly evaluating the SARS-CoV-2 antigen based on gold particle-in-a-frame nanostructures (Au PIAFs). Au PIAF was used as a metal-enhanced fluorescence material. The assay integrated with a microplate reader achieved a sensitivity of 44 fg·mL-1 in under 3 min and accurately detected the SARS-CoV-2 nucleocapsid protein (N protein) in human saliva samples. When our assay is combined with a single-molecule counting platform, the limit of detection can be as low as 0.84 ag·mL-1. This rapid and ultrasensitive assay holds promise as a tool for screening SARS-CoV-2 and other contagious viruses.

Recent advances in plasmon-enhanced luminescence for biosensing and bioimaging

Plasmon-enhanced luminescence (PEL) is a unique photophysical phenomenon in which the interaction between luminescent moieties and metal nanostructures results in a marked luminescence enhancement. PEL offers several advantages and has been extensively used to design robust biosensing platforms for luminescence-based detection and diagnostics applications, as well as for the development of many efficient bioimaging platforms, enabling high-contrast non-invasive real-time optical imaging of biological tissues, cells, and organelles with high spatial and temporal resolution. This review summarizes recent progress in the development of various PEL-based biosensors and bioimaging platforms for diverse biological and biomedical applications. Specifically, we comprehensively assessed rationally designed PEL-based biosensors that can efficiently detect biomarkers (proteins and nucleic acids) in point-of-care tests, highlighting significant improvements in the sensing performance upon the integration of PEL. In addition to discussing the merits and demerits of recently developed PEL-based biosensors on substrates or in solutions, we include a brief discussion on integrating PEL-based biosensing platforms into microfluidic devices as a promising multi-responsive detection method. The review also presents comprehensive details about the recent advances in the development of various PEL-based multi-functional (passive targeting, active targeting, and stimuli-responsive) bioimaging probes, highlighting the scope of future improvements in devising robust PEL-based nanosystems to achieve more effective diagnostic and therapeutic insights by enabling imaging-guided therapy.

A fluorescent sensor based on the cascade signal amplification strategy for ultra-sensitive detection of Cu2

Copper is an essential element in the human body, participating in various physiological activities in the bodies of organisms. However, an excessive load of Cu²⁺ is associated with several neurodegenerative diseases and prion diseases, also identified as a symptom of Wilson's disease (WD). A straightforward, rapid, sensitive, and specific copper sensor is highly required but remains a challenge. In this study, guided by the simulation, we developed a chemical sensor using a cascade signal amplification strategy based on the Cu-catalyzed click reaction, combined with a fluorescence-enhanced substrate with gold nanorods coupled with silver nanoislands. The sensor can selectively detect Cu²⁺ as low as 3.87 nM within 10 min. We have demonstrated that this method can be directly employed for WD diagnosis in urine samples. In addition, using antibiotic susceptibility testing (AST) as an example, we verify whether this assay can be adapted to other targets where Cu is designed as an indirect indicator.

Proteolytic Biosensors with Functional Nanomaterials: Current Approaches and Future Challenges

Proteolytic enzymes are one of the important biomarkers that enable the early diagnosis of several diseases, such as cancers. A specific proteolytic enzyme selectively degrades a certain sequence of a polypeptide. Therefore, a particular proteolytic enzyme can be selectively quantified by changing detectable signals causing degradation of the peptide chain. In addition, by combining polypeptides with various functional nanomaterials, proteolytic enzymes can be measured more sensitively and rapidly. In this paper, proteolytic enzymes that can be measured using a polypeptide degradation method are reviewed and recently studied functional nanomaterials-based proteolytic biosensors are discussed. We anticipate that the proteolytic nanobiosensors addressed in this review will provide valuable information on physiological changes from a cellular level for individual and early diagnosis.

Novel metal enhanced dual-mode fluorometric and SERS aptasensor incorporating a heterostructure nanoassembly for ultrasensitive T-2 toxin detection

Fluorescent gold (Au) nanostructures have emerged as burgeoning materials to fabricate nanomaterial assemblies which play a vital role in improving the detection sensitivity and specificity for various biomolecules. In this work, a fluorescence labelled (Rhodamine-B-Isothiocyanate) silica shell with Au metal core (AuNPs@PVP@RITC@SiO₂) and a graphene-Au nanostar nanocomposite (rGO-AuNS) are presented as a metal enhanced fluorescence (MEF) material and Raman signal enhancer, respectively. Their composite (AuNPs@PVP@RITC@SiO₂NPs/rGO-AuNS) was employed as a dual-mode fluorescence (FL) and surface-enhanced Raman scattering (SERS) nanoprobe for selective and sensitive detection of T-2 toxin. To comprehend the dual-modality, a core-shell nanostructure, AuNPs@PVP@RITC@SiO₂, was functionalized with an aptamer (donor) and adsorbed on the surface of rGO-AuNS through electrostatic forces and π-π stacking which act as a FL quencher and SERS signal enhancer. When exposed to T-2 toxin, the apt-AuNPs@PVP@RITC@SiO₂NPs move away from the surface of rGO-AuNS, resulting in the restoration of FL and reduction of the SERS signal. There was distinct linearity between the T-2 toxin concentration and the dual FL and SERS signals with lower limits of detection (LOD) of 85 pM and 12 pM, as compared to the previous methods, respectively. The developed FL and SERS aptasensor presented excellent recovery ratio and RSD in wheat and maize, respectively, as compared with the standard ELISA method. The complementary performances of the developed stratagem revealed a high correlation between the FL and SERS sensing modes with exquisite detection properties.

Smart Nanostructured Materials for SARS-CoV-2 and Variants Prevention, Biosensing and Vaccination

The coronavirus disease 2019 (COVID-19) pandemic, caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has raised great concerns about human health globally. At the current stage, prevention and vaccination are still the most efficient ways to slow down the pandemic and to treat SARS-CoV-2 in various aspects. In this review, we summarize current progress and research activities in developing smart nanostructured materials for COVID-19 prevention, sensing, and vaccination. A few established concepts to prevent the spreading of SARS-CoV-2 and the variants of concerns (VOCs) are firstly reviewed, which emphasizes the importance of smart nanostructures in cutting the virus spreading chains. In the second part, we focus our discussion on the development of stimuli-responsive nanostructures for high-performance biosensing and detection of SARS-CoV-2 and VOCs. The use of nanostructures in developing effective and reliable vaccines for SARS-CoV-2 and VOCs will be introduced in the following section. In the conclusion, we summarize the current research focus on smart nanostructured materials for SARS-CoV-2 treatment. Some existing challenges are also provided, which need continuous efforts in creating smart nanostructured materials for coronavirus biosensing, treatment, and vaccination.

Structure Formation and Regulation of Au Nanoparticles in LiTaO3 by Ion Beam and Thermal Annealing Techniques

The size uniformity and spatial dispersion of nanoparticles (NPs) formed by ion implantation must be further improved due to the characteristics of the ion implantation method. Therefore, specific swift heavy ion irradiation and thermal annealing are combined in this work to regulate the size and spatial distributions of embedded Au NPs formed within LiTaO₃ crystals. Experimental results show that small NPs migrate to deeper depths induced by 656 MeV Xe³⁵⁺ ion irradiation. During thermal annealing, the growth of large Au NPs is limited due to the reductions in the number of small Au NPs, and the migrated Au NPs aggregate at deeper depths, resulting in a more uniform size distribution and an increased spatial distribution of Au NPs. The present work presents a novel method to modify the size and spatial distributions of embedded NPs.

Progress of advanced nanomaterials in diagnosis of neurodegenerative diseases

Neurodegenerative diseases (NDDs) encompass a wide range of clinically and pathologically diverse diseases characterized by progressive long-term cognitive decline, memory and function loss in daily life. Due to the lack of effective drugs and therapeutic strategies for preventing or delaying neurodegenerative progression, it is urgent to diagnose NDDs as early and accurately as possible. Nanomaterials, emerged as one of the most promising materials in the 21st century, have been widely applied and play a significant role in diagnosis and treatment of NDDs because of their remarkable properties including stability, prominent biocompatibility, unique structure, novel physical and chemical characteristics. In this review, we outlined general strategies for the application of different types of advanced materials in early and staged diagnosis of NDDs in vivo and in vitro. According to applied technology, in vivo research mainly involves magnetic resonance, fluorescence, and surface enhanced Raman imaging on structures of brain tissues, cerebral vessels and related distributions of biomarkers. In vitro research is focused on the detection of fluid biomarkers in cerebrospinal fluid and peripheral blood based on fluorescence, electrochemical, Raman and surface plasmon resonance techniques. Finally, we discussed the current challenges and future perspectives of biomarker-based NDDs diagnosis as well as potential applications regarding advanced nanomaterials.

Lifetime-Based Responsive Probes: Design and Applications in Biological Analysis

With the development of modern biomedicine, biological analysis and detection are very important in disease diagnosis, detection of curative effect, prognosis and prediction of tumor recurrence. Compared with the currently widely used optical probes based on intensity signals, the lifetime signal does not depend on the influence of conditions such as the concentration of luminophore, tissue penetration depth and measurement method. Therefore, biological detection methods based on lifetime-based responsive probes have attracted great attention from the scientific community. Here, we briefly review the key advances in lifetime-based responsive probes in recent years (2017-2022). The review focuses on the design strategies of lifetime-based responsive probes and the research progress of their applications in the field of bioanalysis, and discusses the challenges they face. We hope it will further promote the development of lifetime-based responsive probes in the field of bioanalysis. With the development of modern biomedicine, biological analysis and detection are very important in disease diagnosis, detection of curative effect, prognosis and prediction of tumor recurrence. Compared with the currently widely used optical probes based on intensity signals, the lifetime signal does not depend on the influence of conditions such as the concentration of luminophore, tissue penetration depth and measurement method. Therefore, biological detection methods based on lifetime-based responsive probes have attracted great attention from the scientific community. Here, we briefly review the key advances in lifetime-based responsive probes in recent years (2017-2022). The review focuses on the design strategies of lifetime-based responsive probes and the research progress of their applications in the field of bioanalysis, and discusses the challenges they face. We hope it will further promote the development of lifetime-based responsive probes in the field of bioanalysis.

Time-Resolved Luminescent Sensing and Imaging for Enzyme Catalytic Activity Based on Responsive Probes

Enzymes, as a kind of biomacromolecules, play an important role in many physiological processes and relate directly to various diseases. Developing an efficient detection method for enzyme activity is important to achieve early diagnosis of enzyme-relevant diseases and high throughput screening of potential enzyme-relevant drugs. Time-resolved luminescence assay provide a high accuracy and signal-to-noise ratios detection methods for enzyme activity, which has been widely used in high throughput screening of enzyme-relevant drugs and diagnosis of enzyme-relevant diseases. Inspired by these advantages, various responsive probes based on metal complexes and metal-free organic compounds have been developed for time-resolved bioimaging and biosensing of enzyme activity owing to their long luminescence lifetimes, high quantum yields and photostability. In this review, we comprehensively reviewed metal complex- and metal-free organic compound-based responsive probes applied to detect enzyme activity through time-resolved imaging, including their design strategies and sensing principles. Current challenges and future prospects in this rapidly growing field are also discussed.

Recent Advances in DNA Nanotechnology for Plasmonic Biosensor Construction

Since 2010, DNA nanotechnology has advanced rapidly, helping overcome limitations in the use of DNA solely as genetic material. DNA nanotechnology has thus helped develop a new method for the construction of biosensors. Among bioprobe materials for biosensors, nucleic acids have shown several advantages. First, it has a complementary sequence for hybridizing the target gene. Second, DNA has various functionalities, such as DNAzymes, DNA junctions or aptamers, because of its unique folded structures with specific sequences. Third, functional groups, such as thiols, amines, or other fluorophores, can easily be introduced into DNA at the 5′ or 3′ end. Finally, DNA can easily be tailored by making junctions or origami structures; these unique structures extend the DNA arm and create a multi-functional bioprobe. Meanwhile, nanomaterials have also been used to advance plasmonic biosensor technologies. Nanomaterials provide various biosensing platforms with high sensitivity and selectivity. Several plasmonic biosensor types have been fabricated, such as surface plasmons, and Raman-based or metal-enhanced biosensors. Introducing DNA nanotechnology to plasmonic biosensors has brought in sight new horizons in the fields of biosensors and nanobiotechnology. This review discusses the recent progress of DNA nanotechnology-based plasmonic biosensors.

In situ ratiometric SERS imaging of intracellular protease activity for subtype discrimination of human breast cancer

Accurate discrimination between different cells at the molecular level is of fundamental importance for disease diagnosis. Endogenous proteases are such molecular candidates for cancer cell subtype study. But in situ probing their activity in live cells remains challenging for surface-enhanced Raman scattering (SERS). Here, we present a sensitive ratio-type SERS nanoprobe for imaging of matrix metalloproteinase-2 (MMP-2) in different cancer cells subtypes. The nanoprobe contained three components: a plasmon-active gold nanoparticle as the SERS enhancing matrix, Raman dye rhodamine B (Rh B)-labelled substrate peptides as the specific MMP-2 recognizer, and 2-naphthalenethiol (2-NT) as the internal standard. MMP-2-responsive cleavage of peptides from the nanoprobe surface results in decrease or even disappearance of SERS emission of Rh B, which was ratioed over the emission of 2-NT for the quantification of MMP-2 activity. Both in-tube assay and in-cell imaging results show that the MMP-responsive nanoprobe can work and serve to differentiate the normal breast cells from the tumorous ones, to differentiate two breast cancer cell subtypes with a different degree of malignancy. We believe that this SERS nanoprobe could find a wide application in the fields of tumor biology and accurate disease diagnosis.

Recent advances of sensing strategies for the detection of β-glucuronidase activity

β-Glucuronidase (β-GLU), a kind of hydrolase, is widely distributed in mammalian tissues, body fluids, and microbiota. Abnormal changes of β-GLU activity are often correlated with the occurrence of diseases and deterioration of water quality. Therefore, detection of β-GLU activity is of great significance in biomedicine and environmental health such as cancer diagnosis and water monitoring. However, the conventional β-GLU activity assay suffers from the limitations of low sensitivity, poor accuracy, and complex procedure. With the development of analytical chemistry, many advances have been made in the detection of β-GLU activity in recent years. The sensors for β-GLU activity detection which have the advantages of rapid and reliable detection have been attracting increased attentions. In this paper, the principles, performances, and limitations of these β-GLU sensors, including colorimetric sensing, fluorescent sensing, electrochemical sensing for the determination of β-GLU activity, have been summarized and discussed. Moreover, the challenges and research trends of β-GLU activity assay are proposed.

Ascorbic acid functionalized anti-aggregated Au nanoparticles for ultrafast MEF and SERS detection of tartrazine: an ultra-wide piecewise linear range study

The enhancement mechanism of MEF and SERS.

Dual-Mode Circularly Polarized Light Emission and Metal-Enhanced Fluorescence Realized by the Luminophore-Chiral Cellulose Nanocrystal Interfaces

Circularly polarized (CP) light has attracted wide attention for its great potential in broad applications. However, it remains a challenge to generate left-handed and right-handed circularly polarized (LCP and RCP) light from cellulose nanocrystal (CNC)-based materials only with an intrinsic left-handed chiral structure, owing to the pattern of CP light emission primarily based on the chirality of materials. Herein, a separation structure of luminophore layers and chiral CNCs was provided to achieve dual-mode CP light emission by building a luminophore-chiral CNC interface. By directly exciting the back and front of two-layer films, LCP and RCP light could be easily emitted without any assisting means and specific setting angles. In addition, owing to the formation of the luminophore-chiral CNC interface, metal-enhanced fluorescence (MEF) was achieved to offset the brightness loss caused by circular polarization. By incorporating gold triangular nanoprisms in CNC chiral layers, the fluorescence enhancement of the ensemble was as high as 6.5-fold. The decisive role of the luminophore-chiral CNC interface in enhancing luminescence and dual-mode CP light emission was carefully investigated by contrasting the systems with and without luminophore-chiral CNC interfaces in this study. We believe that this dual-mode CP light emission film with MEF enables a promising approach to extending the application of CP light materials.

Near-Infrared-Fluorescent Probe for Turn-On Lipopolysaccharide Analysis Based on PEG-Modified Gold Nanorods with Plasmon-Enhanced Fluorescence

Lipopolysaccharide (LPS), as the major component of the outer membrane of Gram-negative bacteria, can trigger a variety of biological effects such as sepsis, septic shock, and even multiorgan failure. Herein, we developed a near-infrared-fluorescent probe for fluorescent turn-on analysis of LPS based on plasmon-enhanced fluorescence (PEF). Gold nanorods (Au NRs) modified polyethylene glycol (PEG) was used as PEF materials. Au NRs were prepared with different longitudinal surface plasmon resonance (LSPR), and their fluorescence enhancement was investigated. Three kinds of molecular weights (1000, 5000, and 10000) of polyethylene glycol (PEG) were employed to control the distance between the Au NRs and the fluorescence substances of cyanine 7 (Cy7). Experimental analysis showed that the enhancement was related to the spectral overlap between the plasmon resonance of Au NRs and the extinction/emission of fluorophore. The three-dimensional finite-difference time-domain (3D-FDTD) simulation further revealed that the enhancement was caused by local electric field enhancement. Furthermore, the probe was used for the ultrasensitive analysis of LPS with a detection limit of 3.85 ng/mL and could quickly distinguish the Gram-negative bacterium-Escherichia coli (E. coli) (with LPS in the membrane) from Gram-positive bacterium-Staphylococcus aureus (S. aureus) (without LPS), as well as quantitative determination of E. coli with a detection limit of 1.0 × 10⁶ cfu/mL. These results suggested that the prepared probe has great potential for biomedical diagnosis and selective detection of LPS from different bacterial strains.

Highly selective and sensitive fluorescence detection of tetracyclines based on novel tungsten oxide quantum dots

Tetracyclines (TCs) residues in animal products have attracted extensive concern due to their potential toxic to human health. Accordingly, it is urgent to develop an efficient method to determine TCs for providing consumers with risk pre-warning. Herein, a novel tungsten oxide quantum dots (W_xO_y QDs) fluorescence probe for tetracycline (TET) detection was constructed through ethanol-thermal method, which exhibited intense blue fluorescence under 365 nm UV light. Interestingly, blue-emitting W_xO_y QDs could be quenched obviously after the addition of TET, which may be attributed to the synergism of inner filter effect (IFE), fluorescence resonance energy transfer (FRET) and photo-induced electron transfer (PET). Thereby, the fluorescence method was established for TET detection based on W_xO_y QDs. Additionally, the presented method was demonstrated by monitoring TET in milk and milk powder with satisfactory recoveries. More importantly, this work offered good demonstration for the detection of food hazard factors.

Fluorescence turn-on immunosensing of HE4 biomarker and ovarian cancer cells based on target-triggered metal-enhanced fluorescence of carbon dots

Rapid and sensitive detection of tumor biomarkers and cancer cells is of crucial importance for the early diagnosis and prognosis prediction of cancer. The present report describes a target-induced fluorescence enhancement immunosensor that utilizes the optical property of carbon dots (CDs) and the metal-enhanced fluorescence effect (MEF) property of silver nanoparticles (AgNPs) for the sensitive detection of the cancer biomarker human epididymis protein 4 (HE4) and ovarian cancer cells. Nitrogen and sulfur co-doped CDs with a quantum yield of 85.6% were prepared and served as the fluorophore in MEF. The HE4 antibody (Ab) specific to the HE4 antigen was linked covalently to the surface of the synthesized CDs as the capture. The HE4 Ab-conjugated AgNPs (AgNPs-Ab) were prepared and utilized as signal amplification elements. In the presence of the target HE4, composite sandwich structures were formed between the labeled CDs-Ab and AgNPs-Ab, which brought the CDs and AgNPs into proximity, resulting in the fluorescence of CDs enhancement owing to MEF. The intensity of fluorescence enhancement was positively correlated with the HE4 concentration in the clinically important range of 0.01-200 nM with a limit detection of 2.3 pM. Moreover, the immunosensor was also successfully applied to specific fluorescence labeling and quantitative determination of HE4-positive ovarian cancer cells. The proposed target-triggered MEF sensor platform demonstrated high sensitivity, excellent anti-interference ability, along with successful validation in complex biological matrices, providing a new approach for HE4 detection in early diagnosis and therapeutic monitoring.

Peptide-Derived Biosensors and Their Applications in Tumor Immunology-Related Detection

Small-molecular targeting peptides possess features of biocompatibility, affinity, and specificity, which is widely applied in molecular recognition and detection. Moreover, peptides can be developed into highly ordered supramolecular assemblies with boosting binding affinities, diverse functions, and enhanced stabilities suitable for biosensors construction. In this Review, we summarize recent progress of peptide-based biosensors for precise detection, especially on tumor-related analysis, as well as further provide a brief overview of the progress in tumor immune-related detection. Also, we are looking forward to the prospective future of peptide-based biosensors.

Self-Assembly of Superquenched Gold Nanoparticle Nanosensors for Lighting up BACE-1 in Live Cells

The β-site amyloid precursor protein-cleaving enzyme 1 (BACE-1) plays a key role in Alzheimer's disease (AD) pathogenesis and is regarded as a valuable biomarker for AD diagnosis and treatment. The reported BACE-1 assay often suffers from laborious procedures, large sample consumption, and unsatisfactory sensitivity with high background signals. Herein, we report the self-assembly of superquenched gold nanoparticle (AuNP) nanosensors for lighting up the BACE-1 in live cells. Through the self-assembly of both fluorophore-labeled peptide probes and quencher-labeled assistant DNAs on the surface of a single AuNP, a superquenched AuNP nanoprobe is obtained with a high quenching efficiency of 98.37% and a near-zero background fluorescence. The presence of target BACE-1 induces a distinct fluorescence signal as a result of the BACE-1-catalyzed cleavage of peptide probe and the subsequent release of abundant fluorophore moieties from the AuNP nanoprobe. The fluorescence signal can be directly visualized by single-molecule imaging and easily quantified by single-molecule counting. This nanosensor involves only a single nanoprobe for the one-step homogeneous detection of the BACE-1 activity without the requirements of any antibodies and separation steps, and it possesses good selectivity and high sensitivity with a low detection limit of 26.48 pM. Moreover, it can be employed to screen BACE-1 inhibitors and analyze kinetic parameters. Especially, this nanoprobe possesses good stability and can be easily transferred into live cells for the real-time imaging of cellular BACE-1 activity, providing a new platform for BACE-1-associated research and early diagnosis of Alzheimer's disease.

Nanomaterial-Based Fluorescence Resonance Energy Transfer (FRET) and Metal-Enhanced Fluorescence (MEF) to Detect Nucleic Acid in Cancer Diagnosis

Nucleic acids, including DNA and RNA, have received prodigious attention as potential biomarkers for precise and early diagnosis of cancers. However, due to their small quantity and instability in body fluids, precise and sensitive detection is highly important. Taking advantage of the ease-to-functionality and plasmonic effect of nanomaterials, fluorescence resonance energy transfer (FRET) and metal-enhanced fluorescence (MEF)-based biosensors have been developed for accurate and sensitive quantitation of cancer-related nucleic acids. This review summarizes the recent strategies and advances in recently developed nanomaterial-based FRET and MEF for biosensors for the detection of nucleic acids in cancer diagnosis. Challenges and opportunities in this field are also discussed. We anticipate that the FRET and MEF-based biosensors discussed in this review will provide valuable information for the sensitive detection of nucleic acids and early diagnosis of cancers.

A Promising NIR-II Fluorescent Sensor for Peptide-Mediated Long-Term Monitoring of Kidney Dysfunction

Kidney disease is usually "silent" at the early stage but can lead to severe kidney failure later on. The development of bioimaging probes with rapid distribution and long-term retention in the kidney is significant for the precise diagnosis of renal diseases. Here, a strategy for the peptide-mediated delivery and long-term accumulation (>48 h) of second near-infrared window (NIR-II) fluorophores into the kidney is demonstrated. It is shown that both the hepatic-cleared organic molecules and fast renal-cleared ultrasmall nanoparticles can be retained in the kidney after conjugation to the peptide with high polarity. Moreover, a ROS-responsive activatable bilateral NIR-II sensor was designed based on the kidney targeting peptide, which enables both in vivo long-term kidney monitoring and in vitro urine analysis. The capability of the peptide-based sensor to detect early kidney injury and report on kidney dysfunctional progression is particularly crucial for chemotherapy regimen optimization and timely renoprotective intervention during medication.

Sizes and ligands tuned gold nanocluster acting as a new type of monoamine oxidase B inhibitor

Monoamine oxidase inhibitors (MAOIs) are a class of drugs that can be used in the treatment of Parkinson's disease, clinical depression, and anxiety by targeting monoamine oxidase B (MAO). However, the side effects of MAOIs drive the requirement of a new framework of enzyme inhibitors development. In this context, a new type of MAOI has been built on the framework of gold nanoclusters (AuNCs), realizing the transformation from no function of small molecules to MAOI function of ligand-modified AuNCs. The MAOI activity of fabricated AuNCs can be achieved by size control and specific ligands modification. In this work, AuNCs modified with cysteamine or 4-aminothiophenol, about 1-3 nm in size, were found to have MAOI activity (MAOI-like AuNCs) and their characterization has been extensively described. Meanwhile, the possible mechanism behind this MAOI activity has been explored and it is believed that the proper size of AuNCs with ligands containing amino groups can bind tightly with the entrance to active sites of MAO, blocking the enzyme interacting with its substrates, thereby realizing the function of MAOI. Last, the antimicrobial activity and the performance of the MAOI-like AuNCs in the human blood sample were explored and suggested that MAOI-like AuNCs do not possess strong antimicrobial activity and have no visualized side effect on blood cells, although the by-product peroxide of MAO reaction may reshape the white blood cells. The research in this work may shed some light on the development of a new type of enzyme inhibitor based on the framework of nanomaterials.

CRISPR-Cas12a-Based Nucleic Acid Amplification-Free DNA Biosensor via Au Nanoparticle-Assisted Metal-Enhanced Fluorescence and Colorimetric Analysis

Cell-free DNA (cfDNA) has attracted significant attention due to its high potential to diagnose diseases, such as cancer. Still, its detection by amplification method has limitations because of false-positive signals and difficulty in designing target-specific primers. CRISPR-Cas-based fluorescent biosensors have been developed but also need the amplification step for the detection. In this study, for the first time CRISPR-Cas12a based nucleic acid amplification-free fluorescent biosensor was developed to detect cfDNA by a metal-enhanced fluorescence (MEF) using DNA-functionalized Au nanoparticle (AuNP). Upon activating the CRISPR-Cas12a complex by the target cfDNA and subsequent single-strand DNA (ssDNA) degradation between AuNP and fluorophore, MEF occurred with color changes from purple to red-purple. Using this system, breast cancer gene-1 (BRCA-1) can be detected with very high sensitivity in 30 min. This rapid and highly selective sensor can be applied to measure other nucleic acid biomarkers such as viral DNA in field-deployable and point-of-care testing (POCT) platform.