Regulating the N Coordination Environment of Co Single-Atom Nanozymes for Highly Efficient Oxidase Mimics

Single-atom nanozymes for antibacterial applications

Bacteria have always been a thorny problem that threatens human health and food safety. Conventional antibiotic treatment often leads to the emergence of drug resistance. Therefore, the development of more effective antibacterial agents is urgently needed. Single-atom nanozymes (SAzymes) can efficiently eliminate bacteria due to their high atomic utilization, abundant active centers, and good natural enzyme mimicry, providing a potential alternative choice for antibiotics in antibacterial applications. Here, the antibacterial applications of SAzymes are reviewed and their catalytic properties are discussed from the aspects of active sites, coordination environment regulation and carrier selection. Then, the antibacterial effect of SAzymes is elaborated in combination with photothermal therapy (PTT) and sonodynamic therapy (SDT). Finally, the problems faced by SAzymes in antibacterial applications and their future development potential are proposed.

Oxygen-functionalized Fe3O4@o-polypyrrole acting as high-efficiency oxidase mimics and their application in glutathione colorimetric sensing

The enzyme-like properties of nanozymes may be considerably affected by the structure and surface groups, which thus need to be optimized. Here, through a simple NaOH chemical corrosion method, the chemical structure similar to N-Methylpyrrolidone (NMP), which possessed intrinsic oxidase-like activity, was introduced into polypyrrole (PPy), and then this nanomaterial became oxygen-functionalized PPy (o-PPy) with excellent oxidase-like activity from PPy without this property. Furthermore, after compounding magnetic Fe3O4, the obtained nanocomposites Fe3O4@o-PPy nanoparticles (Fe3O4@o-PPy NPs) showed superiorities in separation during synthesis and real-time control of enzyme catalysis. Studies have found that the enzymatic activity of Fe3O4@o-PPy NPs depended on the amount of functionalized oxygen and the conjugation extent of o-PPy. Fe3O4@o-PPy NPs had efficient oxidase-like activity under a wide range of pH and temperature. Based on the oxidase-like activity of Fe3O4@o-PPy NPs, a colorimetric sensor for glutathione (GSH), which presented rich color changes and satisfactory colorimetric resolution by adding the amaranth, was realized. We believe that the functional modification and structural regulation of PPy can not only realize its wider application but also promote the discovery of novel and efficient nanozymes.

Discovery of FeP/Carbon Dots Nanozymes for Enhanced Peroxidase-Like Catalytic and Antibacterial Activity

Iron phosphide/carbon (FeP/C) serving as electrocatalysts exhibit excellent activity in oxygen reduction reaction (ORR) process. H2O2 catalyzed by peroxidase (POD) is similar to the formation of new electron transfer channels and the optimization of adsorption of oxygen-containing intermediates or desorption of products in ORR process. However, it is still a challenge to discover FeP/C with enhanced POD-like catalytic activity in the electrocatalytic database for biocatalysis. The discovery of FeP/carbon dots (FeP/CDs) nanozymes driven by electrocatalytic activity for enhanced POD-like ability is demonstrated. FeP/CDs derived from CDs-Fe3+ chelates show enhanced POD-like catalytic and antibacterial activity. FeP/CDs exhibit enhanced POD-like activities with a specific activity of 31.1 U mg-1 that is double higher than that of FeP. The antibacterial ability of FeP/CDs nanozymes with enhanced POD-like activity is 98.1%. The antibacterial rate of FeP/CDs nanozymes (250 µg mL-1) increased by 5%, 15%, and 36% compared with FeP, Fe2O3/CDs, and Cu3P/CDs nanozymes, respectively. FeP/CDs nanozymes will attract more efforts to discover or screen transition metal phosphide/C nanozymes with enhanced POD-like catalytic activity for biocatalysis in the electrocatalytic database.

Development of a Zn-Based Single-Atom Nanozyme for Efficient Hydrolysis of Glycosidic Bonds

Hydrolytic enzymes are essential components in second-generation biofuel technology and food fermentation processes. Nanozymes show promise for large-scale industrial applications as replacements for natural enzymes due to their distinct advantages. However, there remains a research gap concerning glycosidase nanozymes. In this study, a Zn-based single-atom nanozyme (ZnN4-900) is developed for efficient glycosidic bond hydrolysis in an aqueous solution. The planar structure of the class-porphyrin N4 material approximatively mimicked the catalytic centers of natural enzymes, facilitating oxidase-like (OXD-like) activity and promoting glycosidic bond cleavage. Theoretical calculations show that the Zn site can act as Lewis acids, attacking the C─O bond in glycosidic bonds. Additionally, ZnN4-900 has the ability to degrade starch and produce reducing sugars that increased yeast cell biomass by 32.86% and ethanol production by 14.56%. This catalyst held promising potential for enhancing processes in ethanol brewing and starch degradation industries.

Two-dimensional β-MnOOH nanosheets with high oxidase-mimetic activity for smartphone-based colorimetric sensing

Manganese (Mn) is a versatile transition element with diverse oxidation states and significant biological importance. Mn-based nanozymes have emerged as promising catalysts in various applications. However, the direct use of manganese oxides as oxidase mimics remains limited and requires further improvement. In this study, we focus on hydroxylated manganese (MnOOH), specifically the layered form β-MnOOH which exhibits unique electronic and structural characteristics. The two-dimensional β-MnOOH nanosheets were synthesized through a hydrothermal approach and showed remarkable oxidase-like activity. These nanosheets effectively converted the oxidase substrate, 3,3',5,5'-tetramethylbenzidine (TMB), into its oxidized form by initiating the conversion of dissolved oxygen into ·O2-, 1O2 and ·OH. However, in the presence of L-cysteine (L-Cys), the catalytic activity of β-MnOOH was significantly inhibited, enabling highly sensitive detection of L-Cys. This sensing strategy was successfully applied for smartphone-based L-Cys assay, offering potential utility in the diagnosis of Cys-related diseases. The exploration of layered β-MnOOH nanosheets as highly active oxidase mimics opens up new possibilities for catalytic and biomedical applications.

Materials Containing Single-, Di-, Tri-, and Multi-Metal Atoms Bonded to C, N, S, P, B, and O Species as Advanced Catalysts for Energy, Sensor, and Biomedical Applications

Modifying the coordination or local environments of single-, di-, tri-, and multi-metal atom (SMA/DMA/TMA/MMA)-based materials is one of the best strategies for increasing the catalytic activities, selectivity, and long-term durability of these materials. Advanced sheet materials supported by metal atom-based materials have become a critical topic in the fields of renewable energy conversion systems, storage devices, sensors, and biomedicine owing to the maximum atom utilization efficiency, precisely located metal centers, specific electron configurations, unique reactivity, and precise chemical tunability. Several sheet materials offer excellent support for metal atom-based materials and are attractive for applications in energy, sensors, and medical research, such as in oxygen reduction, oxygen production, hydrogen generation, fuel production, selective chemical detection, and enzymatic reactions. The strong metal-metal and metal-carbon with metal-heteroatom (i.e., N, S, P, B, and O) bonds stabilize and optimize the electronic structures of the metal atoms due to strong interfacial interactions, yielding excellent catalytic activities. These materials provide excellent models for understanding the fundamental problems with multistep chemical reactions. This review summarizes the substrate structure-activity relationship of metal atom-based materials with different active sites based on experimental and theoretical data. Additionally, the new synthesis procedures, physicochemical characterizations, and energy and biomedical applications are discussed. Finally, the remaining challenges in developing efficient SMA/DMA/TMA/MMA-based materials are presented.

Bioorthogonal Cu Single-Atom Nanozyme for Synergistic Nanocatalytic Therapy, Photothermal Therapy, Cuproptosis and Immunotherapy

Single-atom nanozymes (SAzymes) with atomically dispersed active sites are potential substitutes for natural enzymes. A systematic study of its multiple functions can in-depth understand SAzymes's nature, which remains elusive. Here, we develop a novel ultrafast synthesis of sputtered SAzymes by in situ bombarding-embedding technique. Using this method, sputtered copper (Cu) SAzymes (CuSA) is developed with unreported unique planar Cu-C3 coordinated configuration. To enhance the tumor-specific targeting, we employ a bioorthogonal approach to engineer CuSA, denoted as CuSACO. CuSACO not only exhibits minimal off-target toxicity but also possesses exceptional ultrahigh catalase-, oxidase-, peroxidase-like multienzyme activities, resulting in reactive oxygen species (ROS) storm generation for effective tumor destruction. Surprisingly, CuSACO can release Cu ions in the presence of glutathione (GSH) to induce cuproptosis, enhancing the tumor treatment efficacy. Notably, CuSACO's remarkable photothermal properties enables precise photothermal therapy (PTT) on tumors. This, combined with nanozyme catalytic activities, cuproptosis and immunotherapy, efficiently inhibiting the growth of orthotopic breast tumors and gliomas, and lung metastasis. Our research highlights the potential of CuSACO as an innovative strategy to utilize multiple mechanism to enhance tumor therapeutic efficacy, broadening the exploration and development of enzyme-like behavior and physiological mechanism of action of SAzymes.

Multifunctional Fe/Cu Dual-Single Atom Nanozymes with Enhanced Peroxidase Activity for Isoniazid Detection and Levofloxacin Degradation

The design of single-atom nanozymes with dual active sites to increase their activity and for the detection and degradation of contaminants is rare and challenging. In this work, a single-atom nanozyme (FeCu-NC) based on a three-dimensional porous Fe/Cu dual active site was developed as a colorimetric sensor for both the quantitative analysis of isoniazid (INH) and the efficient degradation of levofloxacin (LEV). FeCu-NC was synthesized using a salt template and freeze-drying method with a three-dimensional hollow porous structure and dual active sites (Fe-Nx and Cu-Nx). In terms of morphology and structure, FeCu-NC exhibits excellent peroxidase-like activity and catalytic properties. Therefore, a colorimetric sensor was constructed around FeCu-NC for sensitive and rapid quantitative analysis of INH with a linear range of 0.9-10 μM and a detection limit as low as 0.3 μM, and the sensor was successfully applied to the analysis of INH in human urine. In addition, FeCu-NC promoted the efficient degradation of LEV by peroxymonosulfate activation, with a degradation rate of 90.4% for LEV at 30 min. This work sheds new light on the application of single-atom nanozymes to antibiotics for colorimetric sensing and degradation.

Linking atomic to mesoscopic scales in multilevel structural tailoring of single-atom catalysts for peroxide activation

A key challenge in designing single-atom catalysts (SACs) with multiple and synergistic functions is to optimize their structure across different scales, as each scale determines specific material properties. We advance the concept of a comprehensive optimization of SACs across different levels of scale, from atomic, microscopic to mesoscopic scales, based on interfacial kinetics control on the coupled metal-dissolution/polymer-growth process in SAC synthesis. This approach enables us to manipulate the multilevel interior morphologies of SACs, such as highly porous, hollow, and double-shelled structures, as well as the exterior morphologies inherited from the metal oxide precursors. The atomic environment around the metal centers can be flexibly adjusted during the dynamic metal-oxide consumption and metal-polymer formation. We show the versatility of this approach using mono- or bi-metallic oxides to access SACs with rich microporosity, tunable mesoscopic structures and atomic coordinating compositions of oxygen and nitrogen in the first coordination-shell. The structures at each level collectively optimize the electronic and geometric structure of the exposed single-atom sites and lower the surface *O formation barriers for efficient and selective peroxidase-type reaction. The unique spatial geometric configuration of the edge-hosted active centers further improves substrate accessibility and substrate-to-catalyst hydrogen overflow due to tunable structural heterogeneity at mesoscopic scales. This strategy opens up new possibilities for engineering more multilevel structures and offers a unique and comprehensive perspective on the design principles of SACs.

Chiral CuxCoyS-CuzS Nanoflowers with Bioinspired Enantioselective Catalytic Performances

Nanomaterials with biomimetic catalytic abilities have attracted significant attention. However, the stereoselectivity of natural enzymes determined by their unique configurations is difficult to imitate. In this work, a kind of chiral CuxCoyS-CuzS nanoflowers (L/D-Pen-NFs) is developed, using porous CuxCoyS nanoparticles (NPs) as stamens, CuzS sheets as petals, and chiral penicillamine as surface stabilizers. Compared to the natural laccase enzyme, L/D-Pen-NFs exhibit significant advantages in catalytic efficiency, stability against harsh environments, recyclability, and convenience in construction. Most importantly, they display high enantioselectivity toward chiral neurotransmitters, which is proved by L- and D-Pen-NFs' different catalytic efficiencies toward chiral enantiomers. L-Pen-NFs are more efficient in catalyzing the oxidation of L-epinephrine and L-dopamine compared with D-Pen-NFs. However, their catalytic efficiency in oxidizing L-norepinephrine and L-DOPA is lower than that of D-Pen-NFs. The reason for the difference in catalytic efficiency is the distinct binding affinities between CuxCoyS-CuzS nano-enantiomers and chiral molecules. This work can spur the development of chiral nanostructures with biomimetic functions.

Chondroitin sulphate modified MoS2 nanoenzyme with multifunctional activities for treatment of Alzheimer's disease

Nano-MoS2 exhibit oxidoreductase-like activities, and has been shown to effectively eliminate excessive intracellular ROS and inhibit Aβ aggregation, thus demonstrating promising potential for anti-Alzheimer's disease (anti-AD) intervention. However, the low water dispersibility and high toxicity of nano-MoS2 limits its further application. In this study, we developed a chondroitin sulphate (CS)-modified MoS2 nanoenzyme (CS@MoS2) by harnessing the excellent biocompatibility of CS and the exceptional activities of nano-MoS2 to explore its potential in anti-AD research. Promisingly, CS@MoS2 significantly inhibited Aβ1-40 aggregation and prevented toxic injury in SH-SY5Y cells caused by Aβ1-40. In addition, CS@MoS2 protected these cells from oxidative stress damage by regulating ROS production, as well as promoting the activities of SOD and GSH-Px. CS@MoS2 also modulated the intracellular Ca2+ imbalance and downregulated Tau hyperphosphorylation by activating GSK-3β. CS@MoS2 suppressed p-NF-κB (p65) translocation to the nucleus by inhibiting MAPK phosphorylation, and modulated the expression of downstream anti- and proinflammatory cytokines. Owing to its multifunctional activities, CS@MoS2 effectively improved spatial learning, memory, and anxiety in D-gal/AlCl3-induced AD mice. Taken together, these results indicate that CS@MoS2 has significant potential for improving the therapeutic efficacy of the prevention and treatment of AD, while also presenting a novel framework for the application of nanoenzymes.

Cationic regulation of specificity and activity of defective MCo2O4 nanozyme (M=Fe, Co, Ni, Cu) for colorimetric detection of caffeic acid

Spinel oxide has great promise in constructing highly active nanozymes due to its tunable crystal structure. However, it still faces the problems of poor specificity and insufficient enzyme activity, which limits its application in the field of analysis. Herein, a series of transition metal spinel oxides were synthesized by cation regulation strategy, and their enzymatic activity and catalytic mechanism were analyzed. Interestingly, FeCo2O4, Co3O4 and NiCo2O4 had oxidase-like activity and peroxidase-like activity, while CuCo2O4 had specific and high oxidase-like activity. Their oxidase-like activities follow the order of FeCo2O4 < Co3O4 < NiCo2O4 < CuCo2O4, which is consistent with their cation radius. The smaller the cation radius of tetrahedral site, the more beneficial it is to increase the oxidase-like activity. The high oxidase-like activity of CuCo2O4 may be attributed to the production of 1O2, •O2- and •OH. EPR results showed the presence of abundant oxygen vacancies in CuCo2O4. Upon the introduction of EDTA, TMB color reaction fades because of oxygen vacancies elimination by EDTA, indicating that oxygen vacancies played an important role in the reaction. Based on the inhibition effect of caffeic acid on the high oxidase-like activity of CuCo2O4, a simple and sensitive caffeic acid colorimetric sensing platform was developed. The linear range for the detection of caffeic acid is 0.02-15 μM, with a detection limit as low as 13 nM. The constructed sensor enables the detection of caffeic acid in caffeic acid tablets and actual water samples, providing a new strategy for the detection of caffeic acid and drug quality control.

Atomic Engineering of Single-Atom Nanozymes for Biomedical Applications

Single-atom nanozymes (SAzymes) showcase not only uniformly dispersed active sites but also meticulously engineered coordination structures. These intricate architectures bestow upon them an exceptional catalytic prowess, thereby captivating numerous minds and heralding a new era of possibilities in the biomedical landscape. Tuning the microstructure of SAzymes on the atomic scale is a key factor in designing targeted SAzymes with desirable functions. This review first discusses and summarizes three strategies for designing SAzymes and their impact on reactivity in biocatalysis. The effects of choices of carrier, different synthesis methods, coordination modulation of first/second shell, and the type and number of metal active centers on the enzyme-like catalytic activity are unraveled. Next, a first attempt is made to summarize the biological applications of SAzymes in tumor therapy, biosensing, antimicrobial, anti-inflammatory, and other biological applications from different mechanisms. Finally, how SAzymes are designed and regulated for further realization of diverse biological applications is reviewed and prospected. It is envisaged that the comprehensive review presented within this exegesis will furnish novel perspectives and profound revelations regarding the biomedical applications of SAzymes.

A feasible strategy for designing cytochrome P450-mimic sandwich-like single-atom nanozymes toward electrochemical CO2 conversion

Carbon dioxide electroreduction (CO2ER) presents a promising strategy for environmentally friendly CO2 utilization due to its low energy consumption. Single-atom nanozymes (SANs), amalgamating the benefits of single-atom catalysts and nanozymes, have become a hot topic in catalysis. Inspired by the intricate structure of cytochrome P450, we designed 81 sandwich-like SANs using Group-VIII transition metals (TMN4-S-TM'N4) and evaluated their performance in CO2ER using density functional theory (DFT). Our investigation revealed that most SANs display superior catalytic activity and improved specific product selectivity in comparison to the Cu (211) surface. Notably, IrN4-S-TMN4 (TM = Co, Rh, Pd) exhibited selective CO2 reduction to CO with remarkable limiting potentials (UL) of -0.11, -0.07, and -0.09 V, respectively, demonstrating potential as artificial CO dehydrogenases. Furthermore, RuN4-S-RuN4 exhibited formate dehydrogenase-like activity, resulting in selective production of HCOOH at a UL of -0.10 V. Machine learning analysis elucidated that the exceptional activity and selectivity of these SANs stemmed from precise modulation of electron density on sulfur atoms, achieved by varying transition metals in the subsurface. Our research not only identifies exceptional SANs for CO2ER but also provides insights into innovative methods for regulating non-bonding interactions and achieving sustainable CO2 conversion.

Rational Biomimetic Construction of Lignin-based Carbon Nanozyme for Identification of Uric Acid in Human Urine

Nanozymes have made remarkable progress in the field of sensing assays by replacing native enzyme functions. However, it is still a challenge to rationally design active centers from molecular structure to enhance the catalytic performance and develop low-cost nanozymes. In this work, guided by the catalytic site of horseradish peroxidase (HRP), iron source and histidine were coupled to the main chain of aminated sodium lignosulfonate (SL) through the self-assembly biomimetic strategy to construct His-SL-Fe with peroxidase activity. The inherent functional groups and basic framework of aminated SL provide a robust environment and promote the formation of active sites. His-SL-Fe shows excellent robustness over multiple test cycles and has a strong affinity for the substrate compared to HRP. His-SL-Fe had been effectively integrated in the sensing system for catalytic detection of uric acid (UA) to achieve accurate recognition of UA in the range of 0.5-100 μM with the limit of detection as low as 0.18 μM. The recovery of human urine samples is in the range of 96.8%-106.1 % and the error is within 4 %. This work not only provides a new approach for the directed design of high-performance nanozymes, but also demonstrates promising ideas for the refined application of biomass resources.

A non-metal single atom nanozyme for cutting off the energy and reducing power of tumors

Enzymes are considered safe and effective therapeutic tools for various diseases. With the increasing integration of biomedicine and nanotechnology, artificial nanozymes offer advanced controllability and functionality in medical design. However, several notable gaps, such as catalytic diversity, specificity and biosafety, still exist between nanozymes and their native counterparts. Here we report a non-metal single-selenium (Se)-atom nanozyme (SeSAE), which exhibits potent nicotinamide adenine dinucleotide phosphate (NADPH) oxidase-mimetic activity. This novel single atom nanozyme provides a safe alternative to conventional metal-based catalysts and effectively cuts off the cellular energy and reduction equivalents through its distinctive catalytic function in tumors. In this study, we have demonstrated the substantial efficacy of SeSAE as an antitumor nanomedicine across diverse mouse models without discernible systemic adverse effects. The mechanism of the NADPH oxidase-like activity of the non-metal SeSAE was rationalized by density functional theory calculations. Furthermore, comprehensive elucidation of the biological functions, cell death pathways, and metabolic remodeling effects of the nanozyme was conducted, aiming to provide valuable insights into the development of single atom nanozymes with clinical translation potential.

Using Cu-Based Metal-Organic Framework as a Comprehensive and Powerful Antioxidant Nanozyme for Efficient Osteoarthritis Treatment

Developing nanozymes with effective reactive oxygen species (ROS) scavenging ability is a promising approach for osteoarthritis (OA) treatment. Nonetheless, numerous nanozymes lie in their relatively low antioxidant activity. In certain circumstances, some of these nanozymes may even instigate ROS production to cause side effects. To address these challenges, a copper-based metal-organic framework (Cu MOF) nanozyme is designed and applied for OA treatment. Cu MOF exhibits comprehensive and powerful activities (i.e., SOD-like, CAT-like, and •OH scavenging activities) while negligible pro-oxidant activities (POD- and OXD-like activities). Collectively, Cu MOF nanozyme is more effective at scavenging various types of ROS than other Cu-based antioxidants, such as commercial CuO and Cu single-atom nanozyme. Density functional theory calculations also confirm the origin of its outstanding enzyme-like activities. In vitro and in vivo results demonstrate that Cu MOF nanozyme exhibits an excellent ability to decrease intracellular ROS levels and relieve hypoxic microenvironment of synovial macrophages. As a result, Cu MOF nanozyme can modulate the polarization of macrophages from pro-inflammatory M1 to anti-inflammatory M2 subtype, and inhibit the degradation of cartilage matrix for efficient OA treatment. The excellent biocompatibility and protective properties of Cu MOF nanozyme make it a valuable asset in treating ROS-related ailments beyond OA.

Enhanced the intrinsic oxidase-like activity of chiral carbon dots via manganese doping for selective catalytic oxidation

It is highly desirable to design and construct chemical catalysts with high activity and specificity as the alternatives of natural enzymes for industrial application. Chiral carbon dots (CDs), possessing both the intrinsic enzyme-like activity and specific recognition ability, are one of good candidates for enzyme-like catalysts. However, their catalytic activity is far from that of natural enzymes and needs to be enhanced. In this work, the modulation of the chiral structure and catalytic activity of chiral CDs with intrinsic oxidase-like activity was implemented by manganese (Mn) doping. Under the light condition, chiral CDs (l-Ser-CDs and d-Ser-CDs) derived from chiral serine (Ser) show weak catalytic activity and low selectivity toward the oxidation of L type of dopamine (l-DOPA), whereas the Mn functionalized chiral CDs (l-Mn-CDs or d-Mn-CDs) exhibit 6.9 times higher in catalytic activity and 2.9 times in selectivity ratio (SR) than Ser-CDs. Mn-CDs involve two-path catalytic process, in which the photogenerated electrons could reduce O2 to O2- as the active species and the holes would oxidize DOPA directly. Moreover, doping of Mn enables the CDs to generate more O2-. Besides, l-Mn-CDs have higher catalytic activity than that of d-Mn-CDs (+54.2 %), and the chiral Mn-CDs have stronger selective adsorption capacity towards chiral DOPA than Ser-CDs. Our work provides a new method for designing and preparing novel chiral artificial enzymes.

Dipole Effect on Oxygen Evolution Reaction of 2D Janus Single-Atom Catalysts: A Case of Rh Anchored on the P6m2-NP Configurations

Catalytic performance of single-atom catalysts (SACs) relies fundamentally on the electronic nature and local coordination environment of the active site. Here, based on a machine-learning (ML)-aided density functional theory (DFT) method, we reveal that the intrinsic dipole in Janus materials has a significant impact on the catalytic activity of SACs, using 2D γ-phosphorus carbide (γ-PC) as a model system. Specifically, a local dipole around the active site is a key degree to tune the catalytic activity and can be used as an important descriptor with a high feature importance of 17.1% in predicting the difference of adsorption free energy (ΔGO* - ΔGOH*) to assess the activity of the oxygen evolution reaction. As a result, the catalytic performance of SACs can be tuned by an intrinsic dipole, in stark contrast to those external stimuli strategies previously used. These results suggest that dipole engineering and the revolutionary DFT-ML hybrid scheme are novel approaches for designing high-performance catalysts.

Co-, N-doped carbon dot nanozymes based on an untriggered ROS generation approach for anti-biofilm activities and in vivo anti-bacterial treatment

Bacterial infections originating from food, water, and soil are widely recognized as significant global public health concerns. Biofilms are implicated in approximately two-thirds of bacterial infections. In recent times, nanomaterials have emerged as potential agents for combating biofilms and bacteria, with many of them being activated by light and H2O2 to generate reactive oxygen species (ROS). However, this energy-consuming and extrinsic substrate pattern poses many challenges for practical application. Consequently, there is a pressing need to develop methods for the untriggered generation of ROS to effectively address biofilm and bacterial infections. In this study, we investigated the oxidase-like activity of the Co,N-doped carbon dot (CoNCD) nanozyme, which facilitated the oxidation of ambient O2 to generate 1O2 in the absence of light and H2O2 supplementation; this resulted in effective biofilm cleavage and enhanced bactericidal effects. CoNCDs could become a potential candidate for wound healing and treatment of acute peritonitis in vivo, which can be primarily attributed to the spontaneous production of ROS. This study presents a convenient ROS generator that does not necessitate any specific triggering conditions. The nanozyme properties of CoNCDs exhibit significant promise as a potential remedy for diseases, specifically as an anti-biofilm and anti-bacterial agent.

Mineral Phase Reconfiguration Enables the High Enzyme-like Activity of Vermiculite for Antibacterial Application

Phyllosilicates-based nanomaterials, particularly iron-rich vermiculite (VMT), have wide applications in biomedicine. However, the lack of effective methods to activate the functional layer covered by the external inert layer limits their future applications. Herein, we report a mineral phase reconfiguration strategy to prepare novel nanozymes by a molten salt method. The peroxidase-like activity of the VMT reconfiguration nanozyme is 10 times that of VMT, due to the electronic structure change of iron in VMT. Density-functional theory calculations confirmed that the upward shifted d-band center of the VMT reconfiguration nanozyme promoted the adsorption of H2O2 on the active iron sites and significantly elongated the O-O bond lengths. The reconfiguration nanozyme exhibited nearly 100% antibacterial activity toward Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), much higher than that of VMT (E. coli 10%, S. aureus 21%). This work provides new insights for the rational design of efficient bioactive phyllosilicates-based nanozyme.

One-Step Synthesis of Hollow CoS2 Spheres Derived from Polyoxometalate-Based Metal-Organic Frameworks with Peroxidase-like Activity

In this work, hollow CoS2 particles were prepared by a one-step sulfurization strategy using polyoxometalate-based metal-organic frameworks as the precursor. The morphology and structure of CoS2 have been monitored by scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray powder diffraction. The mechanism for the formation of CoS2 is discussed. The reaction time and sulfur content are found to be important factors that affect the morphology and pure phase formation of CoS2, and a hollow semioctahedral morphology of CoS2 with open voids was obtained when the sulfur source was twice as large as the precursor and the reaction time was 24 h. The CoS2 (24 h) particles show an excellent peroxidase-like activity for the oxidation of colorless 3,3',5,5'-tetramethylbenzidine (TMB) to blue oxidized (oxTMB) by hydrogen peroxide. The polyoxometalate used as a precursor helps to stabilize oxTMB during catalytic oxidation, forming a stable curve platform for at least 8 min. Additionally, the colorimetric detection of hydroquinone is developed with a low detection limit of 0.42 μM. This research provides a new strategy to design hollow materials with high peroxidase-mimicking activity.

High performance boron doped peroxidase-like nanozyme Cu/B-NC for detection of epinephrine and catalase

Herein, a novel peroxidase-like (POD-like) nanozyme Cu/B-NC was synthesized. The Cu and B co-doped nanozyme Cu/B-NC has competitive POD-like activity but negligible oxidase-like (OXD-like) activity, which is proved to partly benefit from the doping of boron atom. The catalytic activity of Cu/B-NC is high with great affinity for TMB and H2O2 and high reaction velocity. Cu/B-NC was utilized to catalyze the condensation of phenolic substance epinephrine (EP) and 4-aminoantipyrine (4-AAP) to form colored quinone imine in the presence of H2O2. UV-vis absorbance of quinone imine at 492 nm was used for EP determination. Catalase (CAT) could decompose H2O2, so CAT could also be quantified through absorbance variation. The linear ranges of colorimetric detection for EP and CAT were 2-100 μM and 1-30 U mL-1, respectively. The limits of detection (LODs) for EP and CAT were 0.97 μM and 0.57 U mL-1, respectively. The practicability of this sensing platform was further validated by successful application in actual samples.

Self-carbon-thermal-reduction strategy for boosting the Fenton-like activity of single Fe-N4 sites by carbon-defect engineering

Carbon-defect engineering in metal single-atom catalysts by simple and robust strategy, boosting their catalytic activity, and revealing the carbon defect-catalytic activity relationship are meaningful but challenging. Herein, we report a facile self-carbon-thermal-reduction strategy for carbon-defect engineering of single Fe-N4 sites in ZnO-Carbon nano-reactor, as efficient catalyst in Fenton-like reaction for degradation of phenol. The carbon vacancies are easily constructed adjacent to single Fe-N4 sites during synthesis, facilitating the formation of C-O bonding and lowering the energy barrier of rate-determining-step during degradation of phenol. Consequently, the catalyst Fe-NCv-900 with carbon vacancies exhibits a much improved activity than the Fe-NC-900 without abundant carbon vacancies, with 13.5 times improvement in the first-order rate constant of phenol degradation. The Fe-NCv-900 shows high activity (97% removal ratio of phenol in only 5 min), good recyclability and the wide-ranging pH universality (pH range 3-9). This work not only provides a rational strategy for improving the Fenton-like activity of metal single-atom catalysts, but also deepens the fundamental understanding on how periphery carbon environment affects the property and performance of metal-N4 sites.

One-pot synthesized copper-imidazole-2-carboxaldehyde complex material with oxidase-like activity for the colorimetric detection of glutathione and ascorbic acid

Due to the copper (Cu) active sites, its complexes with oxidase-like activity have superior catalytic properties, which can catalyze a series of specific substrates like 3,3',5,5'-tetramethylbenzidine (TMB), producing colorimetric reactions for the detection of different reducing small-molecule compounds. Attribute to the competitive coordination effects between water molecules and central Cu ions, most of the Cu complexes can hardly be used in the pure aqueous reaction system. In this study, a Cu-based material (Cu-imidazole-2-carboxaldehyde, Cu-ICA) was prepared using copper ions and ICA through a one-step process in the water solution. After the morphology of the material being characterized, the mimetic enzyme behavior of the Cu-ICA was demonstrated through the TMB oxidation. Compared to the other reported oxidase-like mimics, Cu-ICA has better aqueous stability and oxidase-like activity, and shows a higher vmax. Furthermore, basing on the oxidase-like activity of Cu-ICA, a colorimetric method was developed for the ascorbic acid and glutathione detections with linear ranges of 0.5-5 μM and 0.5-4 μM, and limit of detection of 0.1304 μM and 0.097 μM, respectively. Owing to its excellent aqueous stability and oxidase-like activity, Cu-ICA has bright application prospects in the analysis of reducing small-molecule compounds.

Single-atom nanozymes: classification, regulation strategy, and safety concerns

Nanozymes, nanomaterials possessing enzymatic activity, have been studied extensively by researchers. However, their complex composition, low density of active sites, and inadequate substrate selectivity have hindered the maturation and widespread acceptance of nanozymes. Single-atom nanozymes (SAzymes) with atomically dispersed active sites are leading the field of catalysis due to their exceptional performance. The maximum utilization rate of atoms, low cost, well-defined coordination structure, and active sites are the most prominent advantages of SAzymes that researchers favor. This review systematically categorizes SAzymes based on their support type and describes their specific applications. Additionally, we discuss regulation strategies for SAzyme activity and provide a comprehensive summary of biosafety challenges associated with these enzymes.

Burgeoning Single-Atom Nanozymes for Efficient Bacterial Elimination

To fight against antibacterial-resistant bacteria-induced infections, the development of highly efficient antibacterial agents with a low risk of inducing resistance is exceedingly urgent. Nanozymes can rapidly kill bacteria with high efficiency by generating reactive oxygen species via enzyme-mimetic catalytic reactions, making them promising alternatives to antibiotics for antibacterial applications. However, insufficient catalytic activity greatly limits the development of nanozymes to eliminate bacterial infection. By increasing atom utilization to the maximum, single-atom nanozymes (SAzymes) with an atomical dispersion of active metal sites manifest superior enzyme-like activities and have achieved great results in antibacterial applications in recent years. In this review, the latest advances in antibacterial SAzymes are summarized, with specific attention to the action mechanism involved in antibacterial applications covering wound disinfection, osteomyelitis treatment, and marine antibiofouling. The remaining challenges and further perspectives of SAzymes for practical antibacterial applications are also discussed.

Ultrathin porous Pd metallene as highly efficient oxidase mimics for the colorimetric detection of chromium (VI)

Palladium (Pd)-based nanomaterials are the emerging class of catalysts with individual physiochemical properties. Unlike traditional catalysts, metallenes showed abundant active sites, large surface area, and high atomic utilization. Based on these benefits, we demonstrate a highly active 2D graphene-like Pd metallene with abundant accessible active sites serving as a highly efficient oxidase mimic. The structure and morphology of Pd metallenezymes were controlled to enhance the catalytic performance and to efficiently utilize all the Pd atoms. Pd metallenezymes with excellent oxidase-like activity were successfully applied for colorimetric-based chromium (VI) (Cr(VI)) detection in a real environment. 3,3',5,5'-Tetramethylbenzidine (TMB) was used as a typical chromogenic substrate catalyzed by Pd metallene to show that blue oxidized TMB (ox TMB) was significantly reduced to colorless TMB by the reducing agent 8-hydroxyquinoline (8-HQ). The reaction process was impressively reversed by the addition of Cr(VI), which interacted with 8-HQ to restore the blue color of TMB. Based on the above results, a facile and effective colorimetric sensing system for the detection of Cr(VI) with a low detection limit of 2.8 nM was developed and could be successfully applied to the detection of Cr(VI) in a real environment.

Dual enzyme-mimicking carbon dots for enhanced antibacterial activity

Carbon dot (CD)-based nanozymes have great potential in antibacterial applications. In order to achieve enhanced broad-spectrum antibacterial capacity, we synthesized Co-doped drug-based CDs (Co-Lvx-CDs) using levofloxacin and vitamin B12 as precursors by mimicking the catalysis of antibacterial activity of natural enzymes. The Co-Lvx-CDs retained not only the effective functional groups of the traditional antibiotic levofloxacin but also achieved oxidase-like and peroxidase-like activities to generate reactive oxygen species (ROS) through Co doping. Additionally, the Co-Lvx-CDs had superb fluorescence properties and could be applied in information encryption. The CDs were validated to have a broad-spectrum bactericidal effect against Gram-positive and -negative bacteria, compensating for the limitations of levofloxacin while also having enhanced sterilization ability. Importantly, the proposed Co-Lvx-CDs provide a new idea for the design of multifunctional CD-based nanozymes with preconceived outcomes.

Recent advances in the synthesis and applications of single-atom nanozymes in food safety monitoring

Nanozymes are synthetic compounds with enzyme-like tunable catalytic properties. The success of nanozymes for catalytic applications can be attributed to their small dimensions, cost-effective synthesis, appreciable stability, and scalability to molecular dimensions. The emergence of single atom nanozymes (SANzymes) has opened up new possibilities in bioanalytical applications. In this regard, this review outlines enzyme-mimicking features of SANzymes for food safety applications in relation to the key variables controlling their catalytic performance. The discussion is extended further to cover the applications of SANzymes for the monitoring of various compounds/biomaterials of significance with respect to food safety (e.g., pesticides, veterinary drug residues, foodborne pathogenic bacteria, mycotoxins/bacterial endotoxin, antioxidant residues, hydrogen peroxide residues, and heavy metal ions). Furthermore, the performance of SANzymes is evaluated in terms of various performance metrics such as limit of detection (LOD), linear dynamic range, and figure of merit (FoM). The challenges and future road map for the applications of SANzymes are also addressed along with their upscaling in the area of food safety.

Cascade Reaction Regulated Electrochemiluminescence via Dual-Atomic-Site Catalysts

Single-atom catalysts (SACs), a novel kind of electrocatalysts with full metal utilization, have been developed as unique signal amplifiers in several sensing platforms. Herein, based on theoretical prediction of the oxygen reduction reaction (ORR) mechanism on different atom sites, we constructed dual-atomic-site catalysts (DACs), Fe/Mn-N-C, to catalyze luminol-dissolved oxygen electrochemiluminescence (ECL). Computational simulation indicated that the weak adsorption of OH* on a single Fe site was overcome by introducing Mn as the secondary metallic active site, resulting in a synergic dual-site cascade mechanism. The superior catalytic activity of Fe/Mn-N-C DACs for the ORR was proven by the highly efficient cathodic luminol ECL, surpassing the performance of single-site catalysts (SACs), Fe-N-C and Mn-N-C. Furthermore, the ECL system, enhanced by a cascade reaction, exhibited remarkable sensitivity to ascorbic acid, with a detection limit of 0.02 nM. This research opens up opportunities for enhancing both the ECL efficiency and sensing performance by employing a rational atomic-scale design for DACs.

Nanozyme Rich in Oxygen Vacancies Derived from Mn-Based Metal-Organic Gel for the Determination of Alkaline Phosphatase

Vacancy engineering as an effective strategy has been widely employed to regulate the enzyme-mimic activity of nanomaterials by adjusting the surface, electronic structure, and creating more active sites. Herein, we purposed a facile and simple method to acquire transition metal manganese oxide rich in oxygen vacancies (OVs-Mn2O3-400) by pyrolyzing the precursor of the Mn(II)-based metal-organic gel directly. The as-prepared OVs-Mn2O3-400 exhibited superior oxidase-like activity as oxygen vacancies participated in the generation of O2•-. Besides, steady state kinetic constant (Km) and catalytic kinetic constant (Ea) suggested that OVs-Mn2O3-400 had a stronger affinity toward 3,3',5,5'-tetramethylbenzidine and possessed prominent catalytic performance. By taking 2-phospho-l-ascorbic acid as the substrate, which can be converted into reducing substance ascorbic acid in the presence of alkaline phosphatase (ALP), OVs-Mn2O3-400 can be applied as an efficient nanozyme for ALP colorimetric analysis without the help of destructive H2O2. The colorimetric sensor established by OVs-Mn2O3-400 for ALP detection showed a good linearity from 0.1 to 12 U/L and a lower limit of detection of 0.054 U/L. Our work paves the way for designing enhanced enzyme-like activity nanozymes, which is of significance in biosensing.

Colorimetric identification of multiple terpenoids based on bimetallic FeCu/NPCs nanozymes

Nanozymes have been relatively well explored, and bimetal-doped nanozymes have attracted much exploration due to their superior catalytic activity. We developed bimetallic FeCu/NPCs and Cu/NPCs nanozymes, which have good catalytic properties due to the coordination of Fe and Cu with N and P. The nanozymes acted as sensing elements in a cascade reaction system to effectively recognize seven terpenoids, including menthol (Men), paeoniflorin (Pae), camphor (Cam), paclitaxel (Pac), andrographolide (Andro), ginkgolide A (Gin A), and piperone (Pip). Terpenoids act as inhibitors of acetylcholinesterase (AChE) and reduce the hydrolysis of acetylcholine (ATCh), providing insight into establishing a simple and distinct assay for terpenoids. Notably, the sensor array distinguished seven terpenoids with concentrations as low as 10 ng/mL and achieved high-precision detection of mixed samples with different molar ratios and 21 unknown samples. Finally, the sensor array successfully distinguished and identified multiple terpenoids in herbal samples.