Direct Patterning of Colloidal Quantum-Dot Thin Films for Enhanced and Spectrally Selective Out-Coupling of Emission

Low-threshold anisotropic polychromatic emission from monodisperse quantum dots

Colloidal quantum dots (QDs) are solution-processable semiconductor nanocrystals with favorable optoelectronic characteristics, one of which is their multi-excitonic behavior that enables broadband polychromatic light generation and amplification from monodisperse QDs. However, the practicality of this has been limited by the difficulty in achieving spatial separation and patterning of different colors as well as the high pumping intensity required to excite the multi-excitonic states. Here, we have addressed these issues by integrating monodisperse QDs in multi-excitonic states into a specially designed cavity, in which the QDs exhibit an anisotropic polychromatic emission (APE) characteristic that allows for tuning the emission from green to red by shifting the observation direction from perpendicular to lateral. Subsequently, the APE threshold under 300-ps pulsed excitation has been reduced from 32 to 21 μJ cm-2 by optimizing the cavity structure. Based on the manipulation of multi-excitonic emission and angle-dependent wavelength selectivity of the developed cavity, we have fabricated a full-color micro-pixel array with a pixel size as small as 23 μm by combining cavity-integrated monodisperse QDs and blue backlight. Furthermore, the threshold of APE under quasi-continuous-wave pumping was as low as 5 W cm-2, indicating its compatibility with commercial LEDs and/or laser diodes. Since APE arises from the multi-excitonic behavior of QDs that supports optical gain, its unprecedentedly low threshold suggests the feasibility of the diode-pumped colloidal QD laser. This work demonstrates a novel method of manipulating the QDs' optical properties beyond controlling their size, composition or structure, and reveals great potential for achieving full-color emission using monodisperse QDs.

Metasurface-Based Phosphor-Converted Micro-LED Architecture for Displays─Creating Guided Modes for Enhanced Directionality

Phosphor-converted micro-light emitting diodes (micro-LEDs) are a crucial technology for display applications but face significant challenges in light extraction because of the high refractive index of the blue pump die chip. In this study, we design and experimentally demonstrate a nanophotonic approach that overcomes this issue, achieving up to a 3-fold increase in light extraction efficiency. Our approach involves engineering the local density of optical states (LDOS) to generate quasi-guided modes within the phosphor layer by strategically inserting a thin low-index spacer in combination with a metasurface for mode extraction. We demonstrate the trade-offs between blue light pumping, LDOS enhancement at the converted emission wavelength, and radiation pattern control using a stratified system solver for dipole emission. Experimentally, the integration of plasmonic antennas and a silica spacer resulted in a 3-fold overall brightness enhancement, with nearly a 4-fold increase in forward emission. This nanophotonic metasurface waveguide design is a critical advancement for producing bright, directional micro-LEDs, particularly in augmented/virtual reality (AR/VR) devices and smartwatch displays, without the need for bulky secondary optics or reflectors.

Highly Efficient and Linearly Polarized Light Emission of Micro-LED Integrated with Double-Functional Meta-Grating

Linearly polarized micro light-emitting diodes (LP-Micro-LEDs) exhibit exceptional potential across diverse fields. The existing methods to introduce polarization to initially unpolarized Micro-LEDs and to further enhance the degree of polarization are, however, at the expense of low luminous efficiency. We fabricated a GaN-based blue Micro-LED integrated with a Al nanograting and a specially designed Ag/GaN meta-grating, which overcomes the dilemma between the luminous efficiency and polarization degree by simultaneously introducing the effects of mode selection and energy recycling. The fabricated LP-Micro-LED achieves an average polarization extinction ratio (ER) of 21.92 dB within ±60°, showing a 2.04-fold increase in efficiency and a 1.32-fold increase in ER compared to the Ag reflector design. This approach opens the way toward the next generation of high-efficiency and low-cost optoelectronic devices in encryption, displays, optical communication, and medicine.

Low-threshold surface-emitting colloidal quantum-dot circular Bragg laser array

Colloidal quantum dots (CQDs) are attractive gain media due to their wavelength-tunability and low optical gain threshold. Consequently, CQD lasers, especially the surface-emitting ones, are promising candidates for display, sensing and communication. However, it remains challenging to achieve a low-threshold surface-emitting CQD laser array with high stability and integration density. For this purpose, it is necessary to combine the improvement of CQD material and laser cavity. Here, we have developed high-quality CQD material with core/interlayer/graded shell structure to achieve a low gain threshold and high stability. Subsequently, surface-emitting lasers based on CQD-integrated circular Bragg resonator (CBR) have been achieved, wherein the near-unity mode confinement factor (Γ of 89%) and high Purcell factor of 22.7 attributed to the strong field confinement of CBR enable a low lasing threshold of 17 μJ cm-2, which is 70% lower than that (56 μJ cm-2) of CQD vertical-cavity surface-emitting laser. Benefiting from the high quality of CQD material and laser cavity, the CQD CBR laser is capable of continuous stable operation for 1000 hours (corresponding to 3.63 × 108 pulses) at room temperature. This performance is the best among solution-processed lasers composed of nanocrystals. Moreover, the miniaturized mode volume in CBR allows the integration of CQD lasers with an unprecedentedly high density above 2100 pixels per inch. Overall, the proposed low-threshold, stable and compactly integrated CQD CBR laser array would advance the development of CQD laser for practical applications.

Strongly polarized color conversion of isotropic colloidal quantum dots coupled to fano resonances

Colloidal quantum dots (QDs) offer high color purity essential to high-quality liquid crystal displays (LCDs), which enables unprecedented levels of color enrichment in LCD-TVs today. However, for LCDs requiring polarized backplane illumination in operation, highly polarized light generation using inherently isotropic QDs remains a fundamental challenge. Here, we show strongly polarized color conversion of isotropic QDs coupled to Fano resonances of v-grooved surfaces compatible with surface-normal LED illumination for next-generation QD-TVs. This architecture overcomes the critically oblique excitation of surface plasmon coupled emission by using v-shapes imprinted on the backlight unit (BLU). With isotropic QDs coated on the proposed v-BLU surface, we experimentally measured a far-field polarization contrast ratio of ∼10. Full electromagnetic solution shows Fano line-shape transmission in transverse magnetic polarization allowing for high transmission as an indication for forward-scattering configuration. Of these QDs coupled to the surface plasmon-polariton modes, we observed strong modifications in their emission kinetics revealed by time-resolved photoluminescence spectroscopy and via dipole orientations identified by back focal plane imaging. This collection of findings indicates conclusively that these isotropic QDs are forced to radiate in a linearly polarized state from the patterned planar surface under surface-normal excitation. For next-generation QD-TVs, the proposed polarized color-converting isotropic QDs on such v-BLUs can be deployed in bendable electronic displays.

22% Record Efficiency in Nanorod Light-Emitting Diodes Achieved by Gradient Shells

The external quantum efficiency (EQE) in light-emitting diodes (LEDs) based on isotropic quantum dots has approached the theoretical limit of close to 20%. Anisotropic nanorods can break this limit by taking advantage of their directional emission. However, the progress towards higher EQE by using CdSe/CdS nanorods (NRs) faces several challenges, primarily involving the low quantum yield and unbalanced charge injection in devices. Herein, the seeded growth method is modified and anisotropic nanorods are obtained with photoluminescence quantum yield up to 98% by coating a gradient alloyed CdZnSe shell around conventional spherical CdSe seeds. This intermediate alloyed CdZnSe shell combined with a subsequent rod-shaped CdZnS/ZnS shell can effectively suppress the electron delocalization in the typical CdSe/CdS nanorods due to their small conduction bandgap offset. Additionally, this alloyed shell can reduce the hole-injection barrier and create a larger barrier for electron injection, both effects promoting a balanced injection of electrons and holes in LEDs. Hence, LEDs are reached with high brightness (160341 cd m-2) and high efficiency (EQE = 22%, current efficiency = 23.19 cd A-1), which are the highest values to date for nanorod LEDs.

Enhanced Photocurrent and Electrically Pumped Quantum Dot Emission from Single Plasmonic Nanoantennas

Integrating cavity-enhanced colloidal quantum dots (QDs) into photonic chip devices would be transformative for advancing room-temperature optoelectronic and quantum photonic technologies. However, issues with efficiency, stability, and cost remain formidable challenges to reach the single antenna limit. Here, we present a bottom-up approach that delivers single QD-plasmonic nanoantennas with electrical addressability. These QD nanojunctions exhibit robust photoresponse characteristics, with plasmonically enhanced photocurrent spectra matching the QD solution absorption. We demonstrate electroluminescence from individual plasmonic nanoantennas, extending the device lifetime beyond 40 min by utilizing a 3 nm electron-blocking polymer layer. In addition, we reveal a giant voltage-dependent redshift of up to 62 meV due to the quantum-confined Stark effect and determine the exciton polarizability of the CdSe QD monolayer to be 4 × 10-5 meV/(kV/cm)2. These developments provide a foundation for accessing scalable quantum light sources and high-speed, tunable optoelectronic systems operating under ambient conditions.

Development of periodically concentric rings within microcavity upon femtosecond laser irradiation

Understanding the formation mechanisms of the nanostructures and their designs has important implications for both the fundamental science and application prospects. In this study, we proposed a strategy for femtosecond laser-induced high regularity concentric rings within silicon microcavity. The morphology of the concentric rings can be flexibly modulated by the pre-fabricated structures and the laser parameters. The physics involved is deeply explored by the Finite-Difference-Time-Domain simulations, which reveals that the formation mechanism can be attributed to the near-field interference of the incident laser and the scattering light from the pre-fabricated structures. Our results provide a new method for creating the designable periodic surface structures.

Controlling light emission by a thermalized ensemble of colloidal quantum dots with a metasurface

We report an experimental and theoretical study of light emission by a patterned ensemble of colloidal quantum dots (cQDs). This system modifies drastically the emission spectrum and polarization as compared to a planar layer of cQDs. It exhibits bright, directional and polarized emission including a degree of circular polarization in some directions. We introduce a model of light emission based on a local Kirchhoff law which reproduces accurately all the features of the experiment. The model provides a figure of merit to assess quantitatively the emitted power. This work paves the way to the systematic design of efficient ultrathin light emitting metasurfaces with controlled polarization, spectrum and directivity.

Facet Engineering for Amplified Spontaneous Emission in Metal Halide Perovskite Nanocrystals

Auger recombination and thermalization time are detrimental in reducing the gain threshold of optically pumped semiconductor nanocrystal (NC) lasers for future on-chip nanophotonic devices. Here, we report the design strategy of facet engineering to reduce the gain threshold of amplified spontaneous emission by manyfold in NCs of the same concentration and edge length. We achieved this hallmark result by controlling the Auger recombination rates dominated by processes involving NC volume and thermalization time to the emitting states by optimizing the number of facets from 6 (cube) to 12 (rhombic dodecahedron) and 26 (rhombicuboctahedrons) in CsPbBr₃ NCs. For instance, we demonstrate a 2-fold reduction in Auger recombination rates and thermalization time with increased number of facets. The gain threshold can be further reduced ∼50% by decreasing the sample temperature to 4 K. Our systematic studies offer a new method to reduce the gain threshold that ultimately forms the basis of nanolasers.

Ligand-Free Direct Optical Lithography of Bare Colloidal Nanocrystals via Photo-Oxidation of Surface Ions with Porosity Control

Microscale patterning of colloidal nanocrystal (NC) films is important for their integration in devices. Here, we introduce the direct optical patterning of all-inorganic NCs without the use of additional photosensitive ligands or additives. We determined that photoexposure of ligand-stripped, "bare" NCs in air significantly reduces their solubility in polar solvents due to photo-oxidation of surface ions. Doses as low as 20 mJ/cm² could be used; the only obvious criterion for material selection is that the NCs need to have significant absorption at the irradiation wavelength. However, transparent NCs can still be patterned by mixing them with suitably absorbing NCs. This approach enabled the patterning of bare ZnSe, CdSe, ZnS, InP, CeO₂, CdSe/CdS, and CdSe/ZnS NCs as well as mixtures of ZrO₂ or HfO₂ NCs with ZnSe NCs. Optical, X-ray photoelectron, and infrared spectroscopies show that solubility loss results from desorption of bound solvent due to photo-oxidation of surface ions. We also demonstrate two approaches, compatible with our patterning method, for modulating the porosity and refractive index of NC films. Block copolymer templating decreases the film density, and thus the refractive index, by introducing mesoporosity. Alternatively, hot isostatic pressing increases the packing density and refractive index of NC layers. For example, the packing fraction of a ZnS NC film can be increased from 0.51 to 0.87 upon hot isostatic pressing at 450 °C and 15 000 psi. Our findings demonstrate that direct lithography by photo-oxidation of bare NC surfaces is an accessible patterning method for facilitating the exploration of more complex NC device architectures while eliminating the influence of bulky or insulating surfactants.

Nondestructive Photopatterning of Heavy-Metal-Free Quantum Dots

Electroluminescence from quantum dots (QDs) is a suitable photon source for futuristic displays offering hyper-realistic images with free-form factors. Accordingly, a nondestructive and scalable process capable of rendering multicolored QD patterns on a scale of several micrometers needs to be established. Here, nondestructive direct photopatterning for heavy-metal-free QDs is reported using branched light-driven ligand crosslinkers (LiXers) containing multiple azide units. The branched LiXers effectively interlock QD films via photo-crosslinking native aliphatic QD surface ligands without compromising the intrinsic optoelectronic properties of QDs. Using branched LiXers with six sterically engineered azide units, RGB QD patterns are achieved on the micrometer scale. The photo-crosslinking process does not affect the photoluminescence and electroluminescence characteristics of QDs and extends the device lifetime. This nondestructive method can be readily adapted to industrial processes and make an immediate impact on display technologies, as it uses widely available photolithography facilities and high-quality heavy-metal-free QDs with aliphatic ligands.

Polarization-based colour tuning of mixed colloidal quantum-dot thin films using direct patterning

Colloidal quantum-dots (cQDs) are finding increasingly widespread application in photonics and optoelectronics, providing high brightness and record-wide colour gamuts. However, the external quantum efficiencies in thin-film device architectures are still limited due to losses into waveguide modes and different strategies are being explored to promote the outcoupling of emission. Here we use a template-stripping-based direct-patterning strategy to fabricate linear gratings at the surface of cQD thin films. The linear gratings enhance optical outcoupling through Bragg scattering, yielding bright emission with a strong degree of linear polarization. By patterning linear gratings with different periodicities and orientations onto a film of mixed-colour cQDs, we demonstrate polarization-based active colour tuning of the thin-film emission.

Direct Patterning of CsPbBr3 Nanocrystals via Electron-Beam Lithography

Lead-halide perovskite (LHP) nanocrystals have proven themselves as an interesting material platform due to their easy synthesis and compositional versatility, allowing for a tunable band gap, strong absorption, and high photoluminescence quantum yield (PLQY). This tunability and performance make LHP nanocrystals interesting for optoelectronic applications. Patterning active materials like these is a useful way to expand their tunability and applicability as it may allow more intricate designs that can improve efficiencies or increase functionality. Based on a technique for II-VI quantum dots, here we pattern colloidal LHP nanocrystals using electron-beam lithography (EBL). We create patterns of LHP nanocrystals on the order of 100s of nanometers to several microns and use these patterns to form intricate designs. The patterning mechanism is induced by ligand cross-linking, which binds adjacent nanocrystals together. We find that the luminescent properties are somewhat diminished after exposure, but that the structures are nonetheless still emissive. We believe that this is an interesting step toward patterning LHP nanocrystals at the nanoscale for device fabrication.

Directional quantum dot emission by soft-stamping on silicon Mie resonators

We present a soft-stamping method to selectively print a homogenous layer of CdSeTe/ZnS core-shell quantum dots (QDs) on top of an array of Si nanocylinders with Mie-type resonant modes. Using this new method, we gain accurate control of the quantum dot's angular emission through engineered coupling of the QDs to these resonant modes. Using numerical simulations we show that the emission into or away from the Si substrate can be precisely controlled by the QD position on the nanocylinder. QDs centered on a 400 nm diameter nanocylinder surface show 98% emission directionality into the Si substrate. Alternatively, for homogenous ensembles placed over the nanocylinder top-surface, the upward emission is enhanced 10-fold for 150 nm diameter cylinders. Experimental PL intensity measurements corroborate the simulated trends with cylinder diameter. PL lifetime measurements reflect well the variations of the local density of states at the QD position due to coupling to the resonant cylinders. These results demonstrate that the soft imprint technique provides a unique manner to directly integrate optical emitters with a wide range of nanophotonic geometries, with potential applications in LEDs, luminescent solar concentrators, and up- and down-conversion schemes for improved photovoltaics.

Nanoscale self-assembly: concepts, applications and challenges

Self-assembly offers unique possibilities for fabricating nanostructures, with different morphologies and properties, typically from vapour or liquid phase precursors. Molecular units, nanoparticles, biological molecules and other discrete elements can spontaneously organise or form via interactions at the nanoscale. Currently, nanoscale self-assembly finds applications in a wide variety of areas including carbon nanomaterials and semiconductor nanowires, semiconductor heterojunctions and superlattices, the deposition of quantum dots, drug delivery, such as mRNA-based vaccines, and modern integrated circuits and nanoelectronics, to name a few. Recent advancements in drug delivery, silicon nanoelectronics, lasers and nanotechnology in general, owing to nanoscale self-assembly, coupled with its versatility, simplicity and scalability, have highlighted its importance and potential for fabricating more complex nanostructures with advanced functionalities in the future. This review aims to provide readers with concise information about the basic concepts of nanoscale self-assembly, its applications to date, and future outlook. First, an overview of various self-assembly techniques such as vapour deposition, colloidal growth, molecular self-assembly and directed self-assembly/hybrid approaches are discussed. Applications in diverse fields involving specific examples of nanoscale self-assembly then highlight the state of the art and finally, the future outlook for nanoscale self-assembly and potential for more complex nanomaterial assemblies in the future as technological functionality increases.

Single-Pulse Measurement of Orbital Angular Momentum Generated by Microring Lasers

Optical beams with helical phase fronts carry orbital angular momentum (OAM). To exploit this property in integrated photonics, micrometer-scale devices that generate beams with well-defined OAM are needed. Consequently, lasers based on microring resonators decorated with azimuthal grating elements have been investigated. However, future development of such devices requires better methods to determine their OAM, as current approaches are challenging to implement and interpret. If a simple and more sensitive technique were available, OAM microring lasers could be better understood and further improved. In particular, despite most devices being pulsed, their OAM output has been assumed to be constant. OAM fluctuations, which are detrimental for applications, need to be quantified. Here, we fabricate quantum-dot microring lasers and demonstrate a simple measurement method that can straightforwardly determine the magnitude and sign of the OAM down to the level of individual laser pulses. We exploit a Fourier microscope with a cylindrical lens and then investigate three types of microring lasers: with circular symmetry, with "blazed" grating elements, and with unidirectional rotational modes. Our results confirm that previous measurement techniques obscured key details about the OAM generation. For example, while time-averaged OAM from our unidirectional laser is very similar to our blazed grating device, single-pulse measurements show that detrimental effects of mode competition are almost entirely suppressed in the former. Nevertheless, even in this case, the OAM output exhibits shot-to-shot fluctuations. Thus, our approach reveals important details in the underlying device operation that can aid in the improvement of micrometer-scale sources with pure OAM output.

Integration of Colloidal Quantum Dots with Photonic Structures for Optoelectronic and Optical Devices

Colloidal quantum dot (QD), a solution-processable nanoscale optoelectronic building block with well-controlled light absorption and emission properties, has emerged as a promising material system capable of interacting with various photonic structures. Integrated QD/photonic structures have been successfully realized in many optical and optoelectronic devices, enabling enhanced performance and/or new functionalities. In this review, the recent advances in this research area are summarized. In particular, the use of four typical photonic structures, namely, diffraction gratings, resonance cavities, plasmonic structures, and photonic crystals, in modulating the light absorption (e.g., for solar cells and photodetectors) or light emission (e.g., for color converters, lasers, and light emitting diodes) properties of QD-based devices is discussed. A brief overview of QD-based passive devices for on-chip photonic circuit integration is also presented to provide a holistic view on future opportunities for QD/photonic structure-integrated optoelectronic systems.

Self-Resonant Microlasers of Colloidal Quantum Wells Constructed by Direct Deep Patterning

Here, the first account of self-resonant fully colloidal μ-lasers made from colloidal quantum well (CQW) solution is reported. A deep patterning technique is developed to fabricate well-defined high aspect-ratio on-chip CQW resonators made of grating waveguides and in-plane reflectors. The fabricated waveguide-coupled laser, enabling tight optical confinement, assures in-plane lasing. CQWs of the patterned layers are closed-packed with sharp edges and residual-free lifted-off surfaces. Additionally, the method is successfully applied to various nanoparticles including colloidal quantum dots and metal nanoparticles. It is observed that the patterning process does not affect the nanocrystals (NCs) immobilized in the attained patterns and the different physical and chemical properties of the NCs remain pristine. Thanks to the deep patterning capability of the proposed method, patterns of NCs with subwavelength lateral feature sizes and micron-scale heights can possibly be fabricated in high aspect ratios.

Single-Mode Lasing in Polymer Circular Gratings

In recent years, conjugated polymers have become the materials of choice to fabricate optoelectronic devices, owing to their properties of high absorbance, high quantum efficiency, and wide luminescence tuning ranges. The efficient feedback mechanism in the concentric ring resonator and its circularly symmetric periodic geometry combined with the broadband photoluminescence spectrum of the conjugated polymer can generate a highly coherent output beam. Here, the detailed design of the ultralow-threshold single-mode circular distributed feedback polymer laser is presented with combined fabrication processes such as electron beam lithography and the spin-coating technique. We observe from the extinction spectra of the circular gratings that the transverse electric mode shows no change with the increase of incident beam angle. The strong enhancement of the conjugated polymer photoluminescence spectra with the circular periodic resonator can reduce the lasing threshold about 19 µJ/cm2. A very thin polymer film of about 110 nm is achieved with the spin-coating technique. The thickness of the gain medium can support only the zero-order transverse electric lasing mode. We expect that such a low threshold lasing device can find application in optoelectronic devices.

Quantitative Electrochemical Control over Optical Gain in Quantum-Dot Solids

Solution-processed quantum dot (QD) lasers are one of the holy grails of nanoscience. They are not yet commercialized because the lasing threshold is too high: one needs >1 exciton per QD, which is difficult to achieve because of fast nonradiative Auger recombination. The threshold can, however, be reduced by electronic doping of the QDs, which decreases the absorption near the band-edge, such that the stimulated emission (SE) can easily outcompete absorption. Here, we show that by electrochemically doping films of CdSe/CdS/ZnS QDs, we achieve quantitative control over the gain threshold. We obtain stable and reversible doping of more than two electrons per QD. We quantify the gain threshold and the charge carrier dynamics using ultrafast spectroelectrochemistry and achieve quantitative agreement between experiments and theory, including a vanishingly low gain threshold for doubly doped QDs. Over a range of wavelengths with appreciable gain coefficients, the gain thresholds reach record-low values of ∼1 × 10-5 excitons per QD. These results demonstrate a high level of control over the gain threshold in doped QD solids, opening a new route for the creation of cheap, solution-processable, low-threshold QD lasers.

Radiation properties of quantum emitters via a plasmonic waveguide integrated with a V-shaped traveling wave antenna

We experimentally study the radiation direction and relaxation rate of quantum emitters (QEs) coupled with a plasmonic waveguide integrated with a V-shaped traveling wave antenna. The plasmonic waveguide couples the excitation energy of the nearby QEs into surface plasmons and the connected V-shaped traveling wave antenna converts them into highly directional radiation. The directivity of the radiation depends on the shape of the antenna. The half-power beam widths of the radiation with respect to the azimuthal and polar angles are as small as 15.1° and 13.1°, respectively, when the antenna has a 144° intersection angle. The relaxation rates of the QEs are enhanced up to 33.04 times relative to the intrinsic emission rate. The method to control the fluorescence of QEs is of great significance for optical devices, nanoscale light sources, and integrated optics.

Experimental demonstration of nanophotonic devices and circuits with colloidal quantum dot waveguides

Colloidal quantum dots (CQDs) have been widely used as absorption or emission materials due to their large-absorption and high-gain properties. However, they are seldom used as low-loss materials in passive nanophotonic devices. Moreover, combinations of two or more properties of CQDs are difficult owing to miscibility of different CQDs. Here, low-loss CQD waveguides are experimentally achieved at wavelengths longer than their fluorescence wavelengths. By using the low-loss and uniform CQD waveguides, various passive nanophotonic devices and a nanophotonic circuit are successfully demonstrated. Furthermore, by employing both of a pattern-assisted stacking and a transfer-printing approach, the miscible problem of different CQDs is addressed, and a low-loss CQD waveguide and a high-gain CQD laser are experimentally integrated on a single chip.

Template Stripping of Perovskite Thin Films for Dry Interfacing and Surface Structuring

Combining excellent optoelectronic properties with the benefits of solution processability, metal-halide perovskites are promising materials for photovoltaic and light-emitting technologies. To facilitate the integration of perovskite thin films into optoelectronic devices, a need exists for simple and efficient fabrication methods. Here, we present a template-stripping technique to produce ultraflat and flexible perovskite thin films. We apply a one-step spin-coating procedure to produce high-quality CH₃NH₃PbBr₃ perovskite thin films on top of ultraflat silicon templates. These films can be mechanically cleaved from the template using a polymer adhesive to reveal the ultraflat perovskite surfaces. We demonstrate how the flatness and flexibility of the template-stripped films enable new processing strategies based on dry interfacing, by interfacing them with plasmonic hole arrays. Moreover, we show that by using prepatterned silicon templates, structured perovskite surfaces can be produced with feature sizes down to a micrometer.

Universal direct patterning of colloidal quantum dots by (extreme) ultraviolet and electron beam lithography

Colloidal quantum dots have found many applications and patterning them on micro- and nanoscale would open a new dimension of tunability for the creation of smaller scale (flexible) electronics or nanophotonic structures. Here we present a simple, general, one-step top-down patterning technique for colloidal quantum dots by means of direct optical or electron beam lithography. We find that both photons and electrons can induce a solubility switch of both PbS and CdSe quantum dot films. The solubility switch can be ascribed to cross-linking of the organic ligands, which we observe from exposure with deep-UV photons (5.5 eV) to extreme-UV photons (91.9 eV), and low-energy (3-70 eV) as well as highly energetic electrons (50 keV). The required doses for patterning are relatively low and feature sizes can be as small as tens of nanometers. The luminescence properties as well as carrier lifetimes remain similar after patterning.

Photolithographic Patterning of Perovskite Thin Films for Multicolor Display Applications

Metal halide perovskites are emerging as attractive materials for light-emitting diode (LED) applications. The external quantum efficiency (EQE) has experienced a rapid progress and reached over 21%, comparable to the state of the art organic and quantum dot LEDs. For metal halide perovskites, their simple solution-processing preparation, facile band gap tunability, and narrow emission line width provide another attractive route to harness their superior optoelectronic properties for multicolor display applications. In this work, we demonstrate a high-resolution, large-scale photolithographic method to pattern multicolor perovskite films. This approach is based on a dry lift-off process which involves the use of parylene as an intermediary and the easy mechanical peeling-off of parylene films on various substrates. Using this approach, we successfully fabricated multicolor patterns with red and green perovskite pixels on a single substrate, which could be further applied in liquid crystal displays (LCDs) with blue backlight. Besides, a prototype green perovskite micro-LED display under current driving has been demonstrated.

Distributed feedback organic lasing in photonic crystals

Considerable research efforts have been devoted to the investigation of distributed feedback (DFB) organic lasing in photonic crystals in recent decades. It is still a big challenge to realize DFB lasing in complex photonic crystals. This review discusses the recent progress on the DFB organic laser based on one-, two-, and three-dimensional photonic crystals. The photophysics of gain materials and the fabrication of laser cavities are also introduced. At last, future development trends of the lasers are prospected.

Direct Imprinting of Quasi-3D Nanophotonic Structures into Colloidal Quantum-Dot Devices

Three-dimensional (3D) subwavelength nanostructures have emerged and triggered tremendous excitement because of their advantages over the two-dimensional (2D) counterparts in fields of plasmonics, photonic crystals, and metamaterials. However, the fabrication and integration of 3D nanophotonic structures with colloidal quantum dots (CQDs) faces several technological obstacles, as conventional lithographic and etching techniques may affect the surface chemistry of colloidal nanomaterials. Here, the direct fabrication of functional quasi-3D nanophotonic structures into CQD films is demonstrated by one-step imprinting with well-controlled precision in both vertical and lateral directions. To showcase the potential of this technique, diffraction gratings, bilayer wire-grid polarizers, and resonant metal mesh long-pass filters are imprinted on CQD films without degrading the optical and electrical properties of CQD. Furthermore, a dual-diode CQD detector into an unprecedented mid-wave infrared two-channel polarization detector is functionalized by embedding an imprinted bilayer wire-grid polarizer within the CQDs. The results show that this approach offers a feasible pathway to combine quasi-3D nanostructures with colloidal materials-based optoelectronics and access a new level of light manipulation.

Micro-to-nanometer patterning of solution-based materials for electronics and optoelectronics

Technologies for micro-to-nanometer patterns of solution-based materials (SBMs) contribute to a wide range of practical applications in the fields of electronics and optoelectronics. Here, state-of-the-art micro-to-nanometer scale patterning technologies of SBMs are disseminated. The utilisation of patterning for a wide-range of SBMs leads to a high level of control over conventional solution-based film fabrication processes that are not easily accessible for the control and fabrication of ordered micro-to-nanometer patterns. In this review, various patterning procedures of SBMs, including modified photolithography, direct-contact patterning, and inkjet printing, are briefly introduced with several strategies for reducing their pattern size to enhance the electronic and optoelectronic properties of SBMs explained. We then conclude with comments on future research directions in the field.

Defect-Tolerant Plasmonic Elliptical Resonators for Long-Range Energy Transfer

Energy transfer allows energy to be moved from one quantum emitter to another. If this process follows the Förster mechanism, efficient transfer requires the emitters to be extremely close (<10 nm). To increase the transfer range, nanophotonic structures have been explored for photon- or plasmon-mediated energy transfer. Here, we fabricate high-quality silver plasmonic resonators to examine long-distance plasmon-mediated energy transfer. Specifically, we design elliptical resonators that allow energy transfer between the foci, which are separated by up to 10 μm. The geometry of the ellipse guarantees that all plasmons emitted from one focus are collected and channeled through different paths to the other focus. Thus, energy can be transferred even if a micrometer-sized defect obstructs the direct path between the focal points. We characterize the spectral and spatial profiles of the resonator modes and show that these can be used to transfer energy between green- and red-emitting colloidal quantum dots printed with subwavelength accuracy using electrohydrodynamic nanodripping. Rate-equation modeling of the time-resolved fluorescence from the quantum dots further confirms the long-distance energy transfer.

Pattern-assisted stacking colloidal quantum dots for photonic integrated circuits

In photonic integrated circuits (PICs), on-chip light sources and other photonic devices are usually made of different materials. The complexity and compatibility brought about by different materials and various structures in a single chip considerably increase the fabrication and integration difficulties. Here, we propose to stack the same nanoscale building blocks [colloidal quantum dots (CQDs) with both large gains and high refractive indices] in predefined trench patterns to address the fabrication and integration problems of PICs. By employing this simple approach of using the same material (CdSe/ZnS CQDs), the on-chip integration of more than 10 CQD-based photonic components (including the laser, low-noise amplifier, bending waveguide, Y-splitter, Mach-Zehnder interferometer, and grating) is experimentally demonstrated. In particular, the integrated low-noise amplifier (net gain coefficient >600 cm^-1) addresses the absorption loss problem brought about by the utilization of the same material. Moreover, the little influence of the CQD layer on the CQD nanophotonic components facilitates the fabrication and is beneficial for large-scale integration. This simple fabrication approach with a flexible integration strategy may provide a possible platform to construct functional PICs.

Enhancement of the Monolayer Tungsten Disulfide Exciton Photoluminescence with a Two-Dimensional Material/Air/Gallium Phosphide In-Plane Microcavity

Light-matter interactions with two-dimensional materials gained significant attention in recent years, leading to the reporting of weak and strong coupling regimes and effective nanolaser operation with various structures. Particularly, future applications involving monolayer materials in waveguide-coupled on-chip-integrated circuitry and valleytronic nanophotonics require controlling, directing, and optimizing photoluminescence. In this context, photoluminescence enhancement from monolayer transition-metal dichalcogenides on patterned semiconducting substrates becomes attractive. It is demonstrated in our work using focused-ion-beam-etched GaP and monolayer WS₂ suspended on hexagonal boron nitride buffer sheets. We present an optical microcavity approach capable of efficient in-plane and out-of-plane confinement of light, which results in a WS₂ photoluminescence enhancement by a factor of 10 compared to that of the unstructured substrate at room temperature. The key concept is the combination of interference effects in both the horizontal direction using a bull's-eye-shaped circular Bragg grating and in the vertical direction by means of a multiple-reflection model with optimized etch depth of circular air-GaP structures for maximum constructive interference effects of the applied pump and expected emission light.

Nanoscale Patterning of Colloidal Nanocrystal Films for Nanophotonic Applications Using Direct Write Electron Beam Lithography

The small size of colloidal nanocrystal quantum dots (QDs) leads to a variety of unique optical properties that are well-suited to nanophotonics, including bright, tunable photoluminescence (PL). However, exploring the properties of solid QD assemblies at the nanoscale has proven challenging because of the limitations in the nanoscale QD patterning methods. Generally, the precise placement of QD solids is difficult to achieve, especially for tall structures with multiple QD layers, and when it is achieved the patterns often cannot withstand the further processing steps required for final device construction. Direct electron beam lithography of QDs has emerged as a straightforward patterning process that does not require ligand exchange and results in structures that retain bright PL. Here, we demonstrate that direct patterning QD films on substrates treated with a self-assembled monolayer of octadecyltrichlorosilane allows us to create feature sizes as thin as 30 nm with heights of multiple layers and characterize the pattern resolution, robustness, and placement accuracy. These structures withstand sonication in a variety of solvents, and the structures are placed within 20 nm of their intended location nearly 100% of the time. We further show how this patterning method can be applied to nanophotonics by measuring the complex refractive index of the QD materials to model the absorption and scattering cross sections of QD structures of various sizes and shapes. These simulations reveal that edge effects arising from the finite shape of the QD nanostructure lead to substantial absorption enhancement when compared to an equivalent volume region taken from a continuous QD film. Finally, we explore more complex structures by patterning QD arrays, multilayer QD structures, and QD disks inside plasmonic resonators.

Room-Temperature Strong Coupling of CdSe Nanoplatelets and Plasmonic Hole Arrays

Exciton polaritons are hybrid light-matter quasiparticles that can serve as coherent light sources. Motivated by applications, room-temperature realization of polaritons requires narrow, excitonic transitions with large transition dipoles. Such transitions must then be strongly coupled to an electromagnetic mode confined in a small volume. While much work has explored polaritons in organic materials, semiconductor nanocrystals present an alternative excitonic system with enhanced photostability and spectral tunability. In particular, quasi-two-dimensional nanocrystals known as nanoplatelets (NPLs) exhibit intense, spectrally narrow excitonic transitions useful for polariton formation. Here, we place CdSe NPLs on silver hole arrays to demonstrate exciton-plasmon polaritons at room temperature. Angle-resolved reflection spectra reveal Rabi splittings up to 149 meV for the polariton states. We observe bright, polarized emission arising from the lowest polariton state. Furthermore, we assess the dependence of the Rabi splitting on the hole-array pitch and the number N of NPLs. While the pitch determines the in-plane momentum for which strong coupling is observed, it does not affect the size of the splitting. The Rabi splitting first increases with NPL film thickness before eventually saturating. Instead of the commonly used [Formula: see text] dependence, we develop an analytical expression that includes the transverse confinement of the plasmon modes to describe the measured Rabi splitting as a function of NPL film thickness.

Tunable colloidal quantum dot distributed feedback lasers integrated on a continuously chirped surface grating

We report a colloidal quantum dot (CQD) distributed feedback (DFB) laser structure containing a chirped grating. The device exhibits single-mode DFB lasing, of which the wavelength is spatially dispersed in a single chip. A period-chirped surface grating is fabricated using a modified Lloyd-type laser interference lithography setup, where a flat Lloyd's mirror is replaced with a concave one. A dense red-emitting CdSe/CdS/ZnS CQD film is prepared on a temporary substrate by spin-coating, which is subsequently released and wet-transferred onto a period-chirped quartz surface grating. Upon optical excitation, the fabricated DFB laser device lases in a single mode at a laser threshold of ∼400 μJ cm-2, with its lasing wavelength shifted linearly (in proportion to the grating pitch) along the chirp direction from 613.4 nm to 623.2 nm over a distance of ∼5.6 mm.

Soft-Lithographic Patterning of Luminescent Carbon Nanodots Derived from Collagen Waste

Luminescent carbon dots (Cdots) synthesized using inexpensive precursors have inspired tremendous research interest because of their superior properties and applicability in various fields. In this work, we report a simple, economical, green route for the synthesis of multifunctional fluorescent Cdots prepared from a natural, low-cost source: collagen extracted from animal skin wastes. The as-synthesized metal-free Cdots were found to be in the size range of ∼1.2-9 nm, emitting bright blue photoluminescence with a calculated Cdot yield of ∼63%. Importantly, the soft-lithographic method used was inexpensive and yielded a variety of Cdot patterns with different geometrical structures and significant cellular biocompatibility. This novel approach to Cdot production highlights innovative ways of transforming industrial biowastes into advanced multifunctional materials which offer exciting potential for applications in nanophotonics and nanobiotechnology using a simple and scalable technique.

3D Nanofabrication via Chemo-Mechanical Transformation of Nanocrystal/Bulk Heterostructures

Planar nanocrystal/bulk heterostructures are transformed into 3D architectures by taking advantage of the different chemical and mechanical properties of nanocrystal and bulk thin films. Nanocrystal/bulk heterostructures are fabricated via bottom-up assembly and top-down fabrication. The nanocrystals are capped by long ligands introduced in their synthesis, and therefore their surfaces are chemically addressable, and their assemblies are mechanically "soft," in contrast to the bulk films. Chemical modification of the nanocrystal surface, exchanging the long ligands for more compact chemistries, triggers large volume shrinkage of the nanocrystal layer and drives bending of the nanocrystal/bulk heterostructures. Exploiting the differential chemo-mechanical properties of nanocrystal and bulk materials, the scalable fabrication of designed 3D, cell-sized nanocrystal/bulk superstructures is demonstrated, which possess unique functions derived from nanocrystal building blocks.

Colloidal-Quantum-Dot Ring Lasers with Active Color Control

To improve the photophysical performance of colloidal quantum dots for laser applications, sophisticated core/shell geometries have been developed. Typically, a wider bandgap semiconductor is added as a shell to enhance the gain from the quantum-dot core. This shell is designed to electronically isolate the core, funnel excitons to it, and reduce nonradiative Auger recombination. However, the shell could also potentially provide a secondary source of gain, leading to further versatility in these materials. Here we develop high-quality quantum-dot ring lasers that not only exhibit lasing from both the core and the shell but also the ability to switch between them. We fabricate ring resonators (with quality factors up to ∼2500) consisting only of CdSe/CdS/ZnS core/shell/shell quantum dots using a simple template-stripping process. We then examine lasing as a function of the optical excitation power and ring radius. In resonators with quality factors >1000, excitons in the CdSe cores lead to red lasing with thresholds at ∼25 μJ/cm2. With increasing power, green lasing from the CdS shell emerges (>100 μJ/cm2) and then the red lasing begins to disappear (>250 μJ/cm2). We present a rate-equation model that can explain this color switching as a competition between exciton localization into the core and stimulated emission from excitons in the shell. Moreover, by lowering the quality factor of the cavity we can engineer the device to exhibit only green lasing. The mechanism demonstrated here provides a potential route toward color-switchable quantum-dot lasers.

Dewetting-Induced Photoluminescent Enhancement of Poly(lauryl methacrylate)/Quantum Dot Thin Films

A new method for enhancing photoluminescence from quantum dot (QD)/polymer nanocomposite films is proposed. Poly(lauryl methacrylate) (PLMA) thin films containing embedded QDs are intentionally allowed to undergo dewetting on substrates by exposure to a nonsolvent vapor. After controlled dewetting, films exhibited typical dewetting morphologies with increased amounts of scattering that served to outcouple photoluminescence from the film and reduce internal light propagation within the film. Up to a 5-fold enhancement of the film emission was achieved depending on material factors such as the initial film thickness and QD concentration within the film. An increase in initial film thickness was shown to increase the dewetted maximum feature size and its characteristic length until a critical thickness was reached where dewetting became inhibited. A unique light exposure-based photopatterning method is also presented for the creation of high contrast emissive patterns as guided by spatially controlled dewetting.