Catalytic Reduction of 4-Nitrophenol: A Quantitative Assessment of the Role of Dissolved Oxygen in Determining the Induction Time

Catalytic reduction of nitroarenes by palladium nanoparticles decorated silica@poly(chitosan-N-isopropylacrylamide-methacrylic acid) hybrid microgels

Conversion of toxic nitroarenes into less toxic aryl amines, which are the most suitable precursors for different types of compounds, is done with various materials which are costly or take more time for this conversion. In this regards, a silica@poly(chitosan-N-isopropylacrylamide-methacrylic acid) Si@P(CS-NIPAM-MAA) Si@P(CNM) core-shell microgel system was synthesized through free radical precipitation polymerization (FRPP) and then fabricated with palladium nanoparticles (Pd NPs) by in situ-reduction method to form Si@Pd-P(CNM) and characterized with XRD, TEM, FTIR, SEM, and EDX. The catalytic efficiency of Si@Pd-P(CNM) hybrid microgels was studied for reduction of 4-nitroaniline (4NiA) under diverse conditions. Different nitroarenes were successfully transformed into their corresponding aryl amines with high yields using the Si@Pd-P(CNM) system as catalyst and NaBH4 as reductant. The Si@Pd-P(CNM) catalyst exhibited remarkable catalytic efficiency and recyclability as well as maintaining its catalytic effectiveness over multiple cycles.

Hydride-doped coinage metal superatoms and their catalytic applications

Superatomic constructs have been identified as a critical component of future technologies. The isolation of coinage metal superatoms relies on partially reducing metallic frameworks to accommodate the mixed valent state required to generate a superatom. Controlling this reduction requires careful consideration in reducing the agent, temperature, and the ligand that directs the self-assembly process. Hydride-based reducing agents dominate the synthetic wet chemical routes to coinage metal clusters. However, within this category, a unique subset of superatoms that retain a hydride/s within the nanocluster post-reduction have emerged. These stable constructs have only recently been characterized in the solid state and have highly unique structural features and properties. The difficulty in identifying the position of hydrides in electron-rich metallic constructs requires the combination and correlation of several analytical methods, including ESI-MS, NMR, SCXRD, and DFT. This text highlights the importance of NMR in detecting hydride environments in these superatomic systems. Added to the complexity of these systems is the dual nature of the hydride, which can act as metallic hydrogen in some cases, resulting in entirely different physical properties. This review includes all hydride-doped superatomic nanoclusters emphasizing synthesis, structure, and catalytic potential.

Synthesis and Catalytic Activity for 2, 3, and 4-Nitrophenol Reduction of Green Catalysts Based on Cu, Ag and Au Nanoparticles Deposited on Polydopamine-Magnetite Porous Supports

This work reports on the synthesis of nine materials containing Cu, Ag, Au, and Ag/Cu nanoparticles (NPs) deposited on magnetite particles coated with polydopamine (PDA). Ag NPs were deposited on two PDA@Fe3O4 supports differing in the thickness of the PDA film. The film thickness was adjusted to impart a textural porosity to the material. During synthesis, Ag(I) was reduced with ascorbic acid (HA), photochemically, or with NaBH4, whereas Au(III), with HA, with the PDA cathecol groups, or NaBH4. For the material characterization, TGA, XRD, SEM, EDX, TEM, STEM-HAADF, and DLS were used. The catalytic activity towards reduction of 4-, 3- and 2-nitrophenol was tested and correlated with the synthesis method, film thickness, metal particle size and NO2 group position. An evaluation of the recyclability of the materials was carried out. In general, the catalysts prepared by using soft reducing agents and/or thin PDA films were the most active, while the materials reduced with NaBH4 remained unchanged longer in the reactor. The activity varied in the direction Au > Ag > Cu. However, the Ag-based materials showed a higher recyclability than those based on gold. It is worth noting that the Cu-containing catalyst, the most environmentally friendly, was as active as the best Ag-based catalyst.

Urethane functions can reduce metal salts under hydrothermal conditions: synthesis of noble metal nanoparticles on flexible sponges applied in semi-automated organic reduction

We report an additive-free one-pot hydrothermal synthesis of Au, Ag, Pd, and alloy AuPd nanoparticles (NPs) anchored on commercial polyurethane (PU) foams. While unable to reduce the precursor metal salts at room temperature, PU is able to serve as a reducing agent under hydrothermal conditions. The resulting NP@PU sponge materials perform comparably to reported state-of-the-art reduction catalysts, and are additionally very well suited for use in semi-automated synthesis: the NP anchoring is strong enough and the support flexible enough to be used as a 'catalytic sponge' that can be manipulated with a robotic arm, i.e., be repeatedly dipped into and drawn out of solutions, wrung out, and re-soaked.

Generation of sub-5 nm AuNPs in the special space of the loop-cluster corona of a polymer vesicle: preparation and its unique catalytic performance in the reduction of 4-nitrophenol

The hybrid vesicle AuNP@LCCV, in which a large number of AuNPs with an average size of about 2.8 nm were densely and uniformly distributed in an isolated state throughout the corona of the unusual polymer vesicle, was prepared via in situ reduction of Au³⁺ ions, which were encapsulated in advance in the unique polymer vesicle (LCCV) consisting of a hydrophobic membrane of poly(2-phenyl-2-oxazoline) and a hydrophilic loop-cluster corona of polyethyleneimine. The vesicle was formed via self-assembly from a comb-like block copolymer in which a polystyrenic main chain was grafted densely with diblock polyethyleneimine-b-poly(2-phenyl-2-oxazoline) and acted as a reactor for the reduction of Au³⁺. The hybrid vesicle AuNP@LCCV showed powerful catalytic ability in the reduction of nitrophenols (NPs). Interestingly, the reduction reactions of NPs showed a remarkably long induction time, which could be shortened dramatically from 60 min to 1-2 min by greatly increasing the concentration of NaBH₄. It is revealed that the oxygen adsorbed on the AuNPs significantly inhibited the reduction, causing the induction time. Once the oxygen is chemically cleaned from the surface of the AuNPs, the reduction of 4-NP proceeds gradually for a while and then completes suddenly. The reduction mechanism accompanying the oxygen-dependent induction time is proposed from the view of the strong oxygen affinity of the catalyst AuNP@LCCV.

Concave gold nano-arrows (AuCNAs) for efficient catalytic reduction of 4-nitrophenol

Anisotropic gold nanostructures have attracted great attention in different fields including catalysis. Thermodynamically driven selective surface growth offers a reliable and reproducible method for anisotropic gold nanoparticle synthesis with specific morphologies. Herein, monocrystalline concave gold nano-arrows (AuCNAs) are prepared by the over-growth method using Au nanorods (AuNRs) as seeds. The as-prepared AuCNAs consist of a biconical head and four concave structures. Interestingly, silver ions (Ag⁺) concentration significantly affects the product morphology by tuning the peak positions of surface plasmon resonance (SPR), aspect ratio, arrow, and concave morphology of AuCNAs. The position of longitudinal SPR peaks is observed at 810, 805 and 782 nm at [Ag⁺]/[Au³⁺] molar ratios of 1:2, 1:1, and 2:1, respectively. Diameters and lengths of AuCNAs varied from 25 nm to 36 nm; 104 nm, 78 nm, and 120 nm, respectively. Additionally, the AuCNAs are applied for the catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in presence of excess NaBH₄. Compared to gold nanorods (AuNRs), the prepared AuCNAs catalyst shows excellent catalytic activity, demonstrating that concave structures and sharp corners significantly enhance the catalytic activity. The value of pseudo-first-order reaction kinetic constants (k_app) increased from 0.0051 to 0.0195 s^-1 with increasing catalyst valume from 7.5 to 37.5 μL. The highest normalized reaction rate constant (K_nor) and turnover frequency (TOF) reach 5.84 × 10⁴ min^-1 mmol^-1 and 443.47 h^-1, respectively, at [Ag⁺]/[Au³⁺] ratio of 1:1 in AuCNAs catalyst. This study expands catalytic applications of anisotropic gold nanostructures and widens their potential application areas, such as surface plasmon exciton photonics, biomedical photonics, and photocatalysis.

In Situ Implantation of Bi2S3 Nanorods into Porous Quasi-Bi-MOF Architectures: Enabling Synergistic Dissociation of Borohydride for an Efficient and Fast Catalytic Reduction of 4-Nitrophenol

Catalytic hydrogenation reduction based on sodium borohydride (NaBH₄) has gained attention as an appealing "one-stone-two-birds" approach for the simultaneous elimination of nitroaromatic pollutants and the production of high-value aminoaromatics under mild conditions. However, the slow kinetics of NaBH₄ dissociation on the surface of catalysts restrict the catalytic hydrogenation reduction efficiency. Herein, we report an intelligent localized sulfidation strategy for an in situ implantation of Bi₂S₃ nanorods within quasi-Bi-MOF architectures (Bi₂S₃@quasi-Bi-MOF) by fine-tuning the pyrolysis temperature. In this novel Bi₂S₃@quasi-Bi-MOF, the porous quasi-Bi-MOF enables efficient adsorption of BH₄^- and 4-nitrophenol (4-NP), while Bi₂S₃ facilitates the BH₄^- dissociation to form H_ads* species adsorbed on the catalyst surface. Benefiting from the synergistic structure, Bi₂S₃@quasi-Bi-MOF exhibits excellent performance for the catalytic reduction of 4-NP, delivering a high turnover frequency (TOF) of 1.67 × 10^-4 mmol mg^-1 min^-1 and an extremely high normalized rate constant (k_nor) of 435298 s^-1 g^-1. The kinetic analysis and electrochemical tests indicate that this catalytic hydrogenation reduction follows the Langmuir-Hinshelwood mechanism. This study enriches the synthetic strategy of MOF-based derivatives and offers a new catalytic platform for hydrogenation reduction reactions.

Tailored synthesis of ultra-stable Au@Pd nanoflowers with enhanced catalytic properties using cellulose nanocrystals

A green strategy for the synthesis of bimetallic core-shell Au@Pd nanoflowers (NFs) employing banana pseudo-stem-derived TEMPO-oxidized cellulose nanocrystals (TCNC) as both capping and shape-directing agent via seed-mediated method is presented. Flower-like nanostructures of Au@Pd bound to TEMPO-oxidized cellulose nanocrystals (TCNC-Au@Pd) were decorated on amino-functionalized graphene (NH₂-RGO) without losing their unique structure, allowing them to be deployed as an efficient, reusable and a green alternative heterogeneous catalyst. The decisive role of TCNC in the structural metamorphosis of nanoparticle morphology were inferred from the structural and morphology analyses. According to our study, the presence of -OH rich TCNC appears to play a pivotal role in the structured evolution of intricate nanostructure morphology. The feasibility of the bio-supported catalyst has been investigated in two concurrently prevalent model catalytic reactions, namely the oxygen reduction reaction (ORR) and the reduction of 4-nitrophenol, the best model reactions in fuel cell and industrial catalytic applications, respectively.

Nickel on Oxidatively Modified Carbon as a Promising Cost-Efficient Catalyst for Reduction of P-Nitrophenol

The reduction of p-nitrophenol to p-aminophenol has become a benchmark reaction for testing the efficiency of new catalytic systems. In this study, we use oxidatively modified carbon (OMC) as a structural support to develop a new cost-efficient nickel-based catalytic system. The newly developed material comprises single nickel ions, chemically bound to the oxygen functional groups on the OMC surface. The highly oxidized character of OMC ensures the high lateral density of nickel ions on its surface at relatively low nickel content. We demonstrate excellent catalytic properties of the new material by using it as a stationary phase in a prototype of a continuous flow reactor: the reagent fed into the reactor is p-nitrophenol, and the product, exiting the reactor, is the fully converted p-aminophenol. The catalytic properties of the new catalyst are associated with its specific morphology, and with high lateral density of active sites on the surface. The reaction can be considered as an example of single-atom catalysis. The resulting material can be used as an inexpensive but efficient catalyst for industrial wastewater treatment. The study opens the doors for the synthesis of a new series of catalytic systems comprising transition metal atoms on the OMC structural support.

The identification of byproducts from the catalytic reduction reaction of 4-nitrophenol to 4-aminophenol: A systematic spectroscopic study

Acetaminophenol, commonly recognized as paracetamol (considered safer than aspirin) is formed by nitration of phenol (4-nitrophenol (4-NP)) for its conversion to 4-aminophenol (4-AP), followed by the acetylation for the final product. As 4-NP is an intermediate product in acetaminophenol (paracetamol) production from phenol the dynamic analysis of acetylation of amine group is important. This study focuses on the feasibility of spectroscopic studies to monitor the removal of 4-NP using sodium borohydride (NaBH₄) probe reaction in the presence of silver, gold, and bimetallic Ag/Au nanoparticles. UV-visible absorbance and fluorescence spectroscopy measurements reveal the formation of 1,4-benzoquinone (BQ), hydroquinone (HQ), and phenol (Ph) as the final products, in addition to the formation of typically reported 4-AP. The intermediates of NaBH₄ seem to play a significant role in the formation of BQ, which converts to HQ in the basic medium followed by the formation of phenol in an acidic medium. Complete kinetic analysis with respect to spectroscopic studies of the standard compounds is presented. Similar results were obtained with 4-NP spiked river and seawater samples. The present findings may lead to catalytic benchmarking that can differ from most of the current practices and highlight the importance of adopting a holistic approach towards the fundamental understanding of 4-NP catalytic reduction that must take into account the concentration of NaBH₄ and pH interdependencies.

Nickel foam supported porous copper oxide catalysts with noble metal-like activity for aqueous phase reactions

Contiguous metal foams offer a multitude of advantages over conventional powders as supports for nanostructured heterogeneous catalysts; most critically a preformed 3-D porous framework ensuring full directional coverage of supported catalyst, and intrinsic ease of handling and recyclability. Nonetheless, metal foams remain comparatively underused in thermal catalysis compared to more conventional supports such as amorphous carbon, metal oxides, zeolites and more recently MOFs. Herein, we demonstrate a facile preparation of highly-reactive, robust, and easy to handle Ni foam-supported Cu-based metal catalysts. The highly sustainable synthesis requires no specialized equipment, no surfactants or additive redox reagents, uses water as solvent, and CuCl2(H2O)2 as precursor. The resulting material seeds as well-separated micro-crystalline Cu2(OH)3Cl evenly covering the Ni foam. Calcination above 400 °C transforms the Cu2(OH)3Cl to highly porous CuO. All materials display promising activity towards the reduction of 4-nitrophenol and methyl orange. Notably, our leading CuO-based material displays 4-nitrophenol reduction activity comparable with very reactive precious-metal based systems. Recyclability studies highlight the intrinsic ease of handling for the Ni foam support, and our results point to a very robust, highly recyclable catalyst system.

Ligand-free sub-5 nm platinum nanocatalysts on polydopamine supports: size-controlled synthesis and size-dictated reaction pathway selection

Noble metal nanoparticles exhibit intriguing size-dependent catalytic activities toward a plethora of important chemical reactions. A particularly interesting but rarely explored scenario is that some catalytic molecule-transforming processes may even inter-switch among multiple reaction pathways when the dimensions of a metal nanocatalyst are deliberately tuned within specific size windows. Here, we take full advantage of the adhesive surface properties of polydopamine to kinetically maneuver the surface-mediated nucleation and growth of Pt nanocrystals, which enables us to synthesize polydopamine-supported sub-5 nm Pt nanocatalysts with precisely tunable particle sizes, narrow size distributions, ligand-free clean surfaces, and uniform dispersion over the supports. The success in precisely tuning the particle size of ligand-free Pt nanocatalysts within the sub-5 nm size window provides unique opportunities for us to gain detailed, quantitative insights concerning the intrinsic particle size effects on the pathway selection of catalytic molecular transformations. As exemplified by Pt-catalyzed nitrophenol reduction by ammonia borane, catalytic transfer hydrogenation reactions may inter-switch between two fundamentally distinct bimolecular reaction pathways, specifically the Langmuir-Hinshelwood and the Eley-Rideal mechanisms, as the size of the Pt nanocatalysts varies in the sub-5 nm regime.

Mechanochemical Strategies for the Preparation of SiO2-Supported AgAu Nanoalloy Catalysts

Silver-gold nanoalloys were prepared from their metal salts precursors through bottom-up mechanochemical synthesis, using one-pot or galvanic replacement reaction strategies. The nanostructures were prepared over amorphous SiO₂ as an inert supporting material, facilitating their stabilization without the use of any stabilizing agent. The nanomaterials were extensively characterized, confirming the formation of the bimetallic nanostructures. The nanoalloys were tested as catalysts in the hydrogenation of 2-nitroaniline and exhibited up to 4-fold the rate constant and up to 37% increased conversion compared to the respective single metal nanoparticles. Our approach is advantageous to produce nanoparticles with clean surfaces with available catalytic sites, directly in the solid-state and in an environmentally friendly manner.

Solvent effects on the kinetics of 4-nitrophenol reduction by NaBH4 in the presence of Ag and Au nanoparticles

The reduction of 4-nitrophenol (4-NiP) to 4-aminophenol (4-AP) with an excess of sodium borohydride is commonly used as a model reaction to assess the catalytic activity of metallic nanoparticles. This reaction is considered both a potentially important step in industrial water treatment and an attractive, commercially relevant synthetic pathway. Surprisingly, an important factor, the role of the reaction medium on the reduction performance, has so far been overlooked. Here, we report a pronounced effect of the solvent on the reaction kinetics in the presence of silver and gold nanoparticles. We demonstrate that the addition of methanol, ethanol, or isopropanol to the reaction mixture leads to a dramatic decrease in the reaction rate. For typical concentrations of reactants, the reduction is completely suppressed in the presence of 50 vol% alcohols. 4-NiP reduction rate in aqueous alcohol mixtures can, however, be improved noticeably by increasing the borohydride concentration or the reaction temperature. The analysis of various factors responsible for solvent effects reveals that the decrease in the reduction rate in the presence of alcohols is related, amongst others, to a substantially higher oxygen solubility in alcohols compared to water. The results of this work show that the effects of solvent properties on reaction kinetics must be considered for unambiguous comparison and optimization of the catalytic performance of metallic nanoparticles in the liquid phase 4-NiP reduction.

The presence of methanol, ethanol, or isopropanol in the reaction mixture substantially affects the kinetics of 4-nitrophenol reduction in aqueous medium.

Catalytic nanoparticles and magnetic nanocatalysts in organic reactions: A mini review

Nanocatalysts, as a part of nanotechnology, have been seen very useful for various fileds of applications capturing a large contribution of the world market. Indeed, several unsolved issues of catalysts have been reconsidered by employing the new nanocatalysts including single core metal atoms and ions with surrounding holes. Moreover, it was expected that the future of catalytic reactions, especially those organic ones, will deal with the nanocatalyst applications. To this aim, the features of catalytic nanoparticles and magnetic nanocatalysts regarding evaluation of their advantages and applications in organic reactions were investigated in this work. Developments of catalytic nanoparticles and magnetic nanocatalysts were discussed in this work regarding the novel applications of such materials at the nanoscale for approaching advantageous features. Increased availability, activity, and stability are very important for applications of the catalysts in various organic reactions. Therefore, it is a must to discuss features of such nanocatalytic systems to provide more information about their advantages and even disadvantages of their applications.

Reduction of 4-nitrophenol using green-fabricated metal nanoparticles

Noble metal (silver (Ag), gold (Au), platinum (Pt), and palladium (Pd)) nanoparticles have gained increasing attention due to their importance in several research fields such as environmental and medical research. This review focuses on the basic perceptions of the green synthesis of metal nanoparticles and their supported-catalyst-based reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). The mechanisms for the formation of these nanoparticles and the catalytic reduction of 4-NP are discussed. Furthermore, the parameters that need to be considered in the catalytic efficiency calculations and perspectives for future studies are also discussed.

Noble metal (silver (Ag), gold (Au), platinum (Pt), and palladium (Pd)) nanoparticles have gained increasing attention due to their importance in several research fields such as environmental and medical research.

Fabrication of defective graphene oxide for efficient hydrogen production and enhanced 4-nitro-phenol reduction

Hydrogen has been considered as one of the most promising alternative energy source to solve the future energy demands due to its high energy capacity and emission-free character. The generation of hydrogen from non-fossil sources is necessary for the sustainable development of human life on this planet. The hydrolysis of sodium borohydride can quickly produce a large amount of hydrogenin situand on-demand in the presence of the catalyst, which can be used as an alternative energy source. So, it is crucial to fabricate the highly efficient, robust, and economical catalyst for the production of hydrogen via hydrolysis of sodium borohydride. Herein, a facile and efficient approach for the synthesis of metal-functionalized reduced graphene oxide for the production of hydrogen at room temperature was used. Moreover, the synthesized catalyst has also been tested in the field of environmental catalysis for the reduction of toxic 4-nitrophenol to valuable 4-aminophenol in the presence of sodium borohydride. The enhanced activity of prepared metal-functionalized reduced graphene oxide is ascribed to a strong affinity between Fe-N_Xand reduced graphene oxide which facilitates electron transfer as well as synergistic effect. Overall, this work presents a crucial procedure for green chemistry reactions when a carbonaceous material is selected as a catalyst.

Pulsed Laser in Liquids Made Nanomaterials for Catalysis

Catalysis is essential to modern life and has a huge economic impact. The development of new catalysts critically depends on synthetic methods that enable the preparation of tailored nanomaterials. Pulsed laser in liquids synthesis can produce uniform, multicomponent, nonequilibrium nanomaterials with independently and precisely controlled properties, such as size, composition, morphology, defect density, and atomistic structure within the nanoparticle and at its surface. We cover the fundamentals, unique advantages, challenges, and experimental solutions of this powerful technique and review the state-of-the-art of laser-made electrocatalysts for water oxidation, oxygen reduction, hydrogen evolution, nitrogen reduction, carbon dioxide reduction, and organic oxidations, followed by laser-made nanomaterials for light-driven catalytic processes and heterogeneous catalysis of thermochemical processes. We also highlight laser-synthesized nanomaterials for which proposed catalytic applications exist. This review provides a practical guide to how the catalysis community can capitalize on pulsed laser in liquids synthesis to advance catalyst development, by leveraging the synergies of two fields of intensive research.

Flow-Through PolyHIPE Silver-Based Catalytic Reactor

Catalytic reactors performing continuously are an important step towards more efficient and controllable processes compared to the batch operation mode. For this purpose, homogenous high internal phase emulsion polymer materials with an immobilized silver catalyst were prepared and used as a continuous plug flow reactor. Porous material with epoxide groups was functionalized to bear aldehyde groups which were used to reduce silver ions using Tollens reagent. Investigation of various parameters revealed that the mass of deposited silver depends on the aldehyde concentration as well as the composition of Tollens reagent. Nanoparticles formed on the pore surface showed high crystallinity with a cuboctahedra crystal shape and highly uniform surface coverage. The example of the 4-nitrophenol catalytic reduction in a continuous process was studied and demonstrated to be dependent on the mass of deposited silver. Furthermore, productivity increased with the volumetric silver density and flow rate, and it was preserved during prolonged usage and storage.

Ultralow Loading Ruthenium on Alumina Monoliths for Facile, Highly Recyclable Reduction of p-Nitrophenol

The pervasive use of toxic nitroaromatics in industrial processes and their prevalence in industrial effluent has motivated the development of remediation strategies, among which is their catalytic reduction to the less toxic and synthetically useful aniline derivatives. While this area of research has a rich history with innumerable examples of active catalysts, the majority of systems rely on expensive precious metals and are submicron- or even a few-nanometer-sized colloidal particles. Such systems provide invaluable academic insight but are unsuitable for practical application. Herein, we report the fabrication of catalysts based on ultralow loading of the semiprecious metal ruthenium on 2–4 mm diameter spherical alumina monoliths. Ruthenium loading is achieved by atomic layer deposition (ALD) and catalytic activity is benchmarked using the ubiquitous para-nitrophenol, NaBH4 aqueous reduction protocol. Recyclability testing points to a very robust catalyst system with intrinsic ease of handling.

Electric field-induced gas dissolving in aqueous solutions

Gas dissolution or accumulation regulating in an aqueous environment is important but difficult in various fields. Here, we performed all-atom molecular dynamics simulations to study the dissolution/accumulation of gas molecules in aqueous solutions. It was found that the distribution of gas molecules at the solid-water interface is regulated by the direction of the external electric field. Gas molecules attach and accumulate to the interface with an electric field parallel to the interface, while the gas molecules depart and dissolve into the aqueous solutions with a vertical electric field. The above phenomena can be attributed to the redistribution of water molecules as a result of the change of hydrogen bonds of water molecules at the interface as affected by the electric field. This finding reveals a new mechanism of regulating gas accumulation and dissolution in aqueous solutions and can have tremendous applications in the synthesis of drugs, the design of microfluidic device, and the extraction of natural gas.

Studies of simultaneous electrochemical sensing of Hg2+ and Cd2+ ions and catalytic reduction properties of 4-nitrophenol by CuO, Au, and CuO@Au composite nanoparticles synthesised using a graft copolymer as a bio-template

Simultaneous electrochemical detection of Hg2+ and Cd2+ ions and catalytic reduction of 4NP to 4AP using a novel synthesized graft copolymer/CuO@Au NPs composite.

Reaction of Substituted Phenols with Lignin Char: Dual Oxidative and Reductive Pathways Depending on Substituents and Conditions

Biomass chars are known to be intrinsically redox-reactive toward some organic compounds, but the mechanisms are still unclear. To address this, a char made anoxically at 500 °C from dealkaline lignin was reacted either in the fresh state or after 180-day aging in air with p-nitrophenol (NO₂-P), p-hydroxybenzaldehyde (CHO-P), phenol (H-P), or p-methoxyphenol (MeO-P). The reactions were carried out under oxic or anoxic conditions. Degradation occurred in all cases. Both oxidation and reduction products were identified, with yields dependent on the presence or absence of air during reaction or storage. They included oligomers, amines, and ring-hydroxylated compounds, among others. Exposure to air suppressed sorption, annihilated reducing sites, and provided a source of reactive oxygen species that assisted degradation. Sorption suppression was due to the incorporation of hydrophilic groups by chemisorption of oxygen, and possibly blockage of sites by products. Fresh char has comparable electron-donating and accepting capacity, whereas there is a preponderance of electron-accepting over donating capacity in aged char. Under anoxic conditions, both oxidation and reduction occurred. Under oxic conditions or after aging in air, oxidation predominated, and linear free energy relationships were found between the rate constant and the Hammett or Brown substituent electronic parameter or the standard electrode potential of the phenol. The results demonstrate that chars possess heterogeneous redox activities depending on reaction pairs, reaction conditions, and aging.

Influencing the Electron Density of Nanosized Au Colloids via Immobilization on MgO to Stimulate Surface Reaction Activities

Heterogenization of colloidal gold on MgO is demonstrated to facilitate its catalytic surface reactivity. We show that the electron density on Au influenced by its immobilization on MgO along with the ensued metal-support interaction is one of the key parameters to obtain high activity. As elucidated by X-ray absorption spectroscopic (X-ray photoelectron spectroscopy, X-ray absorption near-edge structure, and extended X-ray absorption fine structure) studies, the presence of well-dispersed nanosized Au on MgO is observed to result in an enhancement in the electron density of Au. The consequence of this electron-rich gold on the catalytic activity is then investigated using the nitroarene reduction as a model reaction with a detailed kinetic study. The kinetic study is an attempt to use a true heterogeneous system rather than the usually studied quasi-homogeneous systems. The results obtained reveal that the Au/MgO catalyst has a surface rate constant of ∼1.39 × 10^-3 mol m^-2 s^-1, which is significantly higher than those of the reported catalysts. While it validates the higher catalytic activity with a TOF of 9456 h^-1 observed for Au/MgO, the increased adsorption constant for 4-nitrophenol on Au/MgO further reflects the efficacy of MgO as the support. This not only allows effective heterogenization of the Au nanoparticles keeping the catalyst stable under the reaction conditions and being reused several times but also renders a capability in reduction of other nitro group-containing substrates. Therefore, the results are believed to be of importance in designing heterogeneous catalysts utilizing the distinctive properties of the nanosized colloids and tuning their surface reactivity as well.

Mechanism of visible light enhanced catalysis over curcumin functionalized Ag nanocatalysts

There is little research on the visible light photocatalytic properties of the hybrids of plasmonic metals and organic molecules (OM) with the HOMO-LUMO gap in the visible range. Here, we investigate the mechanism of the visible light enhanced reduction of p-nitrophenol (PNP) by glycerol (a green reductant) at ambient temperature over curcumin functionalized Ag nanoparticles (c-AgNPs). The catalytic activity got significantly boosted under visible light irradiation. Reaction kinetics indicated that the catalytic mechanism followed under visible light and in the dark were different. DFT calculations showed that in the ground state, the HOMO resides on Ag while the LUMO is on the curcumin part of the composite. TD-DFT calculations demonstrated the transfer of charge from Ag to curcumin on photo-excitation. Based on this information, we propose a mechanism for understanding the role of curcumin in this photocatalytic phenomenon.

Using a Nitrophenol Cocktail Screen to Improve Catalyst Down-selection

The catalytic reduction of 4-nitrophenol (4NP) with excess NaBH₄ is the benchmark model for quantifying catalytic activity of nanoparticles. Although broadly useful, the reaction can be very selective. This can lead to false positives and negatives when utilized for catalyst down-selection from a broader materials candidate pool. We report a multi-nitrophenol cocktail screening methodology incorporating 4NP and other amino-nitrophenols, utilizing Ag, Au, Pt, and Pd nanoparticles on carbon support. The reduction of the cocktail proceeds with no deleterious side reactions on the time-scale tested. The resulting kinetic rates provide an improved correlation of relative catalyst activity when compared to performance with other reducible moieties (e. g. azo bonds), or when compared to solely 4NP screening.

Kinetic Analysis of 4-Nitrophenol Reduction by "Water-Soluble" Palladium Nanoparticles

The most important model catalytic reaction to test the catalytic activity of metal nanoparticles is the reduction of 4-nitrophenol to 4-aminophenol by sodium borohydride as it can be precisely monitored by UV–vis spectroscopy with high accuracy. This work presents the catalytic reduction of 4-nitrophenol (4-Nip) to 4-aminophenol (4-Amp) in the presence of Pd nanoparticles and sodium borohydride as reductants in water. We first evaluate the kinetics using classical pseudo first-order kinetics. We report the effects of different initial 4-Nip and NaBH₄ concentrations, reaction temperatures, and mass of Pd nanoparticles used for catalytic reduction. The thermodynamic parameters (activation energy, enthalpy, and entropy) were also determined. Results show that the kinetics are highly dependent on the reactant ratio and that pseudo first-order simplification is not always fit to describe the kinetics of the reaction. Assuming that all steps of this reaction proceed only on the surface of Pd nanoparticles, we applied a Langmuir−Hinshelwood model to describe the kinetics of the reaction. Experimental data of the decay rate of 4-nitrophenol were successfully fitted to the theoretical values obtained from the Langmuir–Hinshelwood model and all thermodynamic parameters, the true rate constant k, as well as the adsorption constants of 4-Nip, and BH₄⁻ (K_4-Nip and K_BH4−) were determined for each temperature.

Highly Active Hydrogenation Catalysts Based on Pd Nanoparticles Dispersed along Hierarchical Porous Silica Covered with Polydopamine as Interfacial Glue

New catalysts based on Pd(0) nanoparticles (Pd NPs) on a bimodal porous silica of the UVM-7/polydopamine (PDA) support have been synthesized following two preparative strategies based on the sequential or joint incorporation of two components of the composite (Pd and PDA). We analyzed the role played by the PDA as ‘interfacial glue’ between the silica scaffold and the Pd NPs. The catalysts were tested for the hydrogenation of 4-nitrophenol using (NEt4)BH4 as the hydrogenating agent. In addition to the palladium content, the characterization of the catalysts at the micro and nanoscale has highlighted the importance of different parameters, such as the size and dispersion of the Pd NPs, as well as their accessibility to the substrate (greater or lesser depending on their entrapment level in the PDA) on the catalytic efficiency. Staged sequential synthesis has led to better catalytic results. The most active Pd(0) centers seem to be Pd NPs of less than 1 nm on the PDA surface. The efficiency of the catalysts obtained is superior to that of similar materials without PDA. A comprehensive comparison has been made with other catalysts based on Pd NPs in a wide variety of supports. The TOF values achieved are among the best described in the literature.

Hematite/M (M = Au, Pd) Catalysts Derived from a Double-Hollow Prussian Blue Microstructure: Simultaneous Catalytic Reduction of o- and p-Nitrophenols

Present study deals with hematite/M (M = Au, Pd) catalysts converted from a double-hollow Prussian blue microstructure (DHPM). The unique Prussian blue (PB) microstructure (MS) is prepared by a template-free solvothermal synthetic route in a single-step reaction. An amine-functionalized silicate sol-gel matrix (SSG) has served as the structure-directing agent cum stabilizer for making DHPM. Synthesized DHPM is having a unique structure: a hollow core and an in situ etched porous surface. Growth mechanism is explored and revealed by analyzing several experimental parameters such as HCl concentration, Fe source, effect of the added EtOH, silane concentration, and role of silanes' amine groups. It is identified that the superstructure consisted of well-aligned PB cubes growing radially from the core of the superstructure. Metal (Au and Pd) nanoparticles (NPs) are deposited on both interior and exterior of the PB MS through galvanic displacement reaction, and thus metal NP-loaded hematite phase iron oxide (α-Fe₂O₃) nanomaterials were derived by annealing them in air. Catalytic activities of the hematite/M(M = Au, Pd) MS are investigated toward simultaneous catalytic reduction of o-nitrophenol and p-nitrophenol. The resultant hematite/Pd MS showed high structural stability and catalytic active sites than the hematite/Au MS, which enhances the catalytic properties for the simultaneous catalytic reduction of both nitrophenols.

An exclusive deposition method of silver nanoparticles on TiO2 particles via low-temperature decomposition of silver-alkyldiamine complexes in aqueous media

The low-temperature decomposition of Ag(i)–dmpda complexes catalytically occurs on TiO₂ surfaces in water.

Role of dissolved oxygen in nitroarene reduction by a heterogeneous silver textile catalyst in water

The effects of dissolved oxygen concentration on the rate constant of the 4-nitrophenol reduction reaction with a silver-coated textile as a ‘dip-catalyst’ were studied.

A Combined Mechanochemical and Calcination Route to Mixed Cobalt Oxides for the Selective Catalytic Reduction of Nitrophenols

Para-, or 4-nitrophenol, and related nitroaromatics are broadly used compounds in industrial processes and as a result are among the most common anthropogenic pollutants in aqueous industrial effluent; this requires development of practical remediation strategies. Their catalytic reduction to the less toxic and synthetically desirable aminophenols is one strategy. However, to date, the majority of work focuses on catalysts based on precisely tailored, and often noble metal-based nanoparticles. The cost of such systems hampers practical, larger scale application. We report a facile route to bulk cobalt oxide-based materials, via a combined mechanochemical and calcination approach. Vibratory ball milling of CoCl2(H2O)6 with KOH, and subsequent calcination afforded three cobalt oxide-based materials with different combinations of CoO(OH), Co(OH)2, and Co3O4 with different crystallite domains/sizes and surface areas; Co@100, Co@350 and Co@600 (Co@###; # = calcination temp). All three prove active for the catalytic reduction of 4-nitrophenol and related aminonitrophenols. In the case of 4-nitrophenol, Co@350 proved to be the most active catalyst, therein its retention of activity over prolonged exposure to air, moisture, and reducing environments, and applicability in flow processes is demonstrated.

Borohydride stabilized gold-silver bimetallic nanocatalysts for highly efficient 4-nitrophenol reduction

Bimetallic Au _x Ag_1-x nanoparticles, prepared using sodium borohydride as the sole reducing and capping agent for various NaBH₄ : metal molar ratios, were investigated as catalysts for 4-nitrophenol reduction. This approach yielded the highest catalytic activities observed for this model reaction to date.

Aqueous Cathodic Exfoliation Strategy toward Solution-Processable and Phase-Preserved MoS2 Nanosheets for Energy Storage and Catalytic Applications

The production of MoS₂ nanosheets by electrochemical exfoliation routes holds great promise as a means to access this two-dimensional material in large quantities for different practical applications. However, the use of electrolytes based on synthetic organic salts and solvents, as well as issues related to the unwanted oxidation and/or phase transformation of the exfoliated nanosheets, constitute significant obstacles that hinder the industrial adoption of the electrochemical approach. Here, we introduce a safe and sustainable method for the cathodic delamination of MoS₂ that makes use of aqueous solutions of very simple and widely available salts, mainly KCl, as the electrolyte. Combined with an appropriate biomolecule-based solvent transfer protocol, such an electrolytic exfoliation route is shown to afford colloidally dispersed, oxide-free, and phase-preserved MoS₂ nanosheets of high structural quality in considerable yields. The mechanisms behind the efficient aqueous delamination of the bulk MoS₂ cathode are also discussed and rationalized on the basis of the penetration of hydrated cations from the electrolyte between its layers and the immediate reduction of the accompanying water molecules. An asymmetric supercapacitor assembled with a cathodic MoS₂ nanosheet-single walled carbon nanotube hybrid as the positive electrode and activated carbon as the negative electrode delivered energy densities (e.g., 26 W h kg^-1 at 750 W kg^-1 in 6 M KOH) that were competitive with those of other MoS₂-based asymmetric devices. When used as a catalyst for the reduction of nitroarenes, the present cathodically exfoliated nanosheets exhibited one of the highest activities reported so far with MoS₂ nanostructures, the origin of which is accounted for as well. Overall, by facilitating access to this two-dimensional material through a particularly simple, efficient, and cost-effective technique, these results should expedite the practical implementation of MoS₂ nanosheets in energy storage, catalysis, and beyond.

Reduction of nitroarenes catalyzed by microgel-stabilized silver nanoparticles

Poly(N-isopropylacrylamide-co-acrylamide) (PNA-BIS-2) microgels were synthesized by free radical precipitation polymerization in aqueous medium. Spherical Ag nanoparticles with diameter of 10-20 nm were fabricated inside the PNA-BIS-2 microgels by in-situ reduction of silver nitrate using sodium borohydride as reducing agent. The Ag nanoparticles- loaded hybrid microgels were characterized by Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Energy dispersive X-ray (EDX), Scanning transmission electron microscopy (STEM), Ultraviolet visible spectroscopy (UV Visible), Thermogravimetric analysis (TGA) and X-ray diffraction (XRD). Ag contents in the hybrid system were determined by inductively coupled plasma - optical emission spectrometry (ICP-OES). Various nitroarenes were successfully converted into their respective aromatic amines with good to excellent yields (ranging from 75% to 97%) under mild reaction conditions. The catalyst has ability to successfully convert substituted nitroarenes into desired products keeping many functionalities intact. The catalyst can be stored for long time without any sign of aggregation and can be used multiple times without any significant loss in its catalytic activity.

Carbon Supported Gold Nanoparticles for the Catalytic Reduction of 4-Nitrophenol

This work is a detailed study on how to optimize gold colloids preparation and their deposition to very different in nature carbon materials. The change of the continuous phase and its dielectric constant is used to assure the good dispersion of the hydrophilic/hydrophobic carbons and the successful transfer of the preformed small size colloids to their surface. The sintering behavior of the particles during the calcination step is also studied and the optimal conditions to reduce to a minimum the particle size increase during the protecting agent removal phase are found. The as prepared catalysts have been tested in a relevant reaction in the field of environmental catalysis such as the reduction of 4-nitrophenol leading to promising results. Overall, this work proposes an important methodology to follow when a carbonaceous material are selected as catalyst supports for green chemistry reactions.

Photocatalysis as an advanced reduction process (ARP): The reduction of 4-nitrophenol using titania nanotubes-ferrite nanocomposites

TiO₂ photocatalysis is an advanced process, employed worldwide for the oxidation of organic compounds, that leads to significant technological applications in the fields of health and environment. The use of the photocatalytic approach in reduction reactions seems very promising and can open new horizons for green chemistry synthesis. For this purpose, titanium dioxide nanotubes (TNTs) were developed in autoclave conditions using TiO₂ P25 as a precursor material. Based on these nanotubular substrates, TiO₂/CoFe₂O₄ (TCF) nanocomposites were further obtained by wet impregnation method. The materials were thoroughly characterized and their structural, textural, vibrational, optoelectronic and magnetic properties were determined. The composite materials combine absorbance in the visible optical range and high BET surface area values (˜100 m²/g), showing extremely high yield in the photocatalytic reduction of 4-nitrophenol (4-NP), exceeding 94% within short illumination time (only 35 min). The developed nanocomposites were successfully reused in consecutive photocatalytic experiments and were easily removed from the reaction medium using magnets. Both remarkable recycling ability and high-performance stability in the photocatalytic reduction of nitrophenol were observed, thus justifying the significant economic potential and industrial perspectives for this advanced reduction process.