Graphene Nanobubbles Produced by Water Splitting

Gas Evolution in Water Electrolysis

Gas bubbles generated by the hydrogen evolution reaction and oxygen evolution reaction during water electrolysis influence the energy conversion efficiency of hydrogen production. Here, we survey what is known about the interaction of gas bubbles and electrode surfaces and the influence of gas evolution on practicable devices used for water electrolysis. We outline the physical processes occurring during the life cycle of a bubble, summarize techniques used to characterize gas evolution phenomena in situ and in practical device environments, and discuss ways that electrodes can be tailored to facilitate gas removal at high current densities. Lastly, we review efforts to model the behavior of individual gas bubbles and multiphase flows produced at gas-evolving electrodes. We conclude our review with a short summary of outstanding questions that could be answered by future efforts to characterize gas evolution in electrochemical device environments or by improved simulations of multiphase flows.

In Situ Tracking of Water Oxidation Generated Nanoscale Dynamics in Layered Double Hydroxides Nanosheets

Layered double hydroxides (LDHs) are potential catalysts for water oxidation, and it is recognized that they undergo dynamic evolution during the operation. However, little is known about the interfacial behaviors at the nanoscale under working conditions nor the underlying effects on electrocatalytic performance. Herein, using electrochemical atomic force microscopy, we in situ visualize the heterogeneous evolution of LDH nanosheets during oxygen evolution reaction (OER). By further combining density functional theory calculations, we elucidate the origin of the heterogeneous dynamics and their impact on the OER efficiency. Our findings demonstrate that NiCo LDHs transform to the catalytically active NiCoOx(OH)2-x phase during OER, and the redox transition between is accompanied by compressive and tensile strain, leading to in-plane contraction and reversible expansion of the nanosheets. Nonisotropic strain and out-of-plane strain relaxation due to defects and interparticle interactions result in cracking and wrinkling in the nanostructure, which is responsible for the partial activation and long-term deterioration of LDH electrocatalysts toward the OER. With this knowledge, we suggest and validate that engineering defects can precisely tune these dynamic behaviors, improving the OER activity and stability among LDH-based electrocatalysts.

Preparation and Modeling of Graphene Bubbles to Obtain Strain-Induced Pseudomagnetic Fields

It has been both theoretically predicted and experimentally demonstrated that strain can effectively modulate the electronic states of graphene sheets through the creation of a pseudomagnetic field (PMF). Pressurizing graphene sheets into bubble-like structures has been considered a viable approach for the strain engineering of PMFs. However, the bubbling technique currently faces limitations such as long manufacturing time, low durability, and challenges in precise control over the size and shape of the pressurized bubble. Here, we propose a rapid bubbling method based on an oxygen plasma chemical reaction to achieve rapid induction of out-of-plane deflections and in-plane strains in graphene sheets. We introduce a numerical scheme capable of accurately resolving the strain field and resulting PMFs within the pressurized graphene bubbles, even in cases where the bubble shape deviates from perfect spherical symmetry. The results provide not only insights into the strain engineering of PMFs in graphene but also a platform that may facilitate the exploration of the strain-mediated electronic behaviors of a variety of other 2D materials.

Nanobubble-induced significant reduction of the interfacial thermal conductance for few-layer graphene

The heat transport properties of van der Waals layered structures are crucial for ensuring the reliability and longevity of high-performance optoelectronic equipment. Owing to the two-dimensional nature of atomic layers, the presence of bubbles is commonly observed within these structures. Nevertheless, the effect of bubbles on the interfacial thermal conductance remains unclear. Based on the elastic membrane theory and the improved van der Waals gas state equation, we develop an analytical formula to describe the influence of bubble shape on the interfacial thermal conductance. It shows that the presence of bubbles has a considerable impact on reducing the interfacial thermal conductance across graphene/graphene interfaces. More specifically, the presence of nanobubbles can result in a reduction of up to 53% in the interfacial thermal conductance. The validity of the analytical predictions is confirmed through molecular dynamic simulations. These results offer valuable insights into the thermal management of van der Waals layered structures in the application of next-generation electronic nanodevices.

Trapping Hydrogen Molecules between Perfect Graphene

There is a lack of deep understanding of hydrogen intercalation into graphite due to many challenges faced during characterization of the systems. Therefore, a suitable route to trap isolated hydrogen molecules (H2) between the perfect graphite lattices needs to be found. Here we realize the formation of hydrogen bubbles in graphite with controllable density, size, and layer number. We find that the molecular H2 cannot be diffused between nor escape from the defect-free graphene lattices, and it remains stable in the pressurized bubbles up to 400 °C. The internal pressure of H2 inside the bubbles is strongly temperature dependent, and it decreases as the temperature rises. The proton permeation rate can be estimated at a specific plasma power. The producing method of H2 bubbles offers a useful way for storing hydrogen in layered materials, and these materials provide a prospective research platform for studying nontrivial quantum effects in confined H2.

Interfacial Nanoblisters Formed in Water Serving as Freestanding Platforms for Measuring Elastic Moduli of Polymeric Nanofilms

Polymeric nanofilms have been widely utilized in diverse cutting-edge technologies, yet accurately determining their elastic moduli remains challenging. Here we demonstrate that interfacial nanoblisters, which are produced by simply immersing substrate-supported nanofilms in water, represent natural platforms for assessing the mechanical properties of polymeric nanofilms using the sophisticated nanoindentation method. Nevertheless, high-resolution, quantitative force spectroscopy studies reveal that the indentation test must be performed on an effective freestanding region around the nanoblister apex and meanwhile under an appropriate loading force, to obtain load-independent, linear elastic deformations. The nanoblister stiffness increases with either decreasing its size or increasing its covering film thickness, and such size effects can be adequately rationalized by an energy-based theoretical model. The proposed model also enables an exceptional determination of the film elastic modulus. Given that interfacial blistering is a frequently occurring phenomenon for polymeric nanofilms, we envision that the presented methodology would stimulate broad applications in relevant fields.

Polymer curing assisted formation of optically visible sub-micron blisters of multilayer graphene for local strain engineering

The local or global straining techniques are used to modulate the electronic, vibrational and optical properties of the two-dimensional (2D) materials. However, manipulating the physical properties of a 2D material under a local strain is comparatively more challenging. In this work, we demonstrate an easy and efficient polymer curing assisted technique for the formation of optically visible multilayer graphene (MLG) blisters of different shapes and sizes. The detailed spectroscopic and morphological analyses have been employed for exploring the dynamics of the confined matter inside the sub-micron blisters, which confirms that the confined matter inside the blister is liquid (water). From further analyses, we find the nonlinear elastic plate model as an acceptable model under certain limits for the mechanical analyses of the MLG blisters over the (poly)vinyl alcohol (PVA) polymer film to estimate the MLG-substrate interfacial adhesion energy and confinement pressure inside the blisters. The findings open new pathways for exploiting the technique for the formation of sub-micron blisters of the 2D materials for local strain-engineering applications, as well as the temperature-controlled release of the confined matter.

Universal shape of graphene nanobubbles on metallic substrate

Graphene nanobubbles (GNBs) are formed from matter trapped between a two-dimensional material and a substrate. Such structures exhibit a wide range of new fundamental phenomena and are promising for nanoelectronic applications. However, a central part of the synthesis methods leads to the formation of GNBs with undetermined matter composition. Moreover, none of the GNBs' synthesis methods allow one to control the type of trapped matter. In a recent paper [K. M. Zahra, PCCP, 22,7606 (2020)], the authors proposed a new approach that allows the production of GNBs on a copper substrate with pure nitrogen inside in a controlled manner. In this work, we continue this research by studying the geometry of the GNBs in detail and indirectly measuring the internal pressure, which depends on the van der Waals adhesion energy and elastic properties of the graphene membrane. In agreement with other studies, we observe that dome-shaped bubbles exhibit universal scaling law, i.e., constant height to radius ratio. However, the measured height to radius ratio differs significantly from the known results of experiments and computer simulations. This deviation is explained by applying the membrane theory and taking into account the high adhesion of the copper substrate and graphene sheet. The adhesion energy calculated based on experimental data is close to the measurements performed by other experimental techniques.

Construction of Position-Controllable Graphene Bubbles in Liquid Nitrogen with Assistance of Low-Power Laser

Graphene bubbles (GBs) are of significant interest owing to their distinguished electrical, optical, and magnetic properties. GBs can also serve as high-pressure reaction vessels to numerous chemical reactions. However, previous strategies to produce GBs are relatively elaborate and random. Therefore, their potential applications are severely restricted. Here, a facile and effective protocol is proposed to construct position-controllable GBs in liquid nitrogen (LN) with the assistance of laser and graphene wrinkles. Specifically, a film of graphene mounted on a SiO₂ substrate (G@SiO₂) is subjected to irradiation by a low-power laser in LN and then many GBs emerge from the surface of G@SiO₂. Most impressively, the domain where GBs arise is the position of the laser beam spot. Hence, we demonstrated that the high collimation of laser facilitates the position definition of GBs. The microscopic results indicate that some GBs split into three parts when they were subjected to irradiation by an electron. Meanwhile, some GBs degenerate into pores with a diameter of 500 nm when they are exposed to air. To grasp the properties of GBs in depth, the molecular dynamics (MD) simulations are performed, and the corresponding results indicate that temperature has very little impact on the GBs' shape. A phase transition process of the substance inside GBs is also revealed. Moreover, a two-dimensional (2D) solid nitrogen is discovered by MD simulations. The simplicity of our protocol paves the way to engineer high-pressure microreaction vessels and fabricate porous graphene membranes.

Direct Measurement of the Contents, Thickness, and Internal Pressure of Molybdenum Disulfide Nanoblisters

Nanoblisters have attracted attention due to their ability to controllably modulate the properties of two-dimensional materials. The accurate measurement or estimation of their properties is nontrivial and largely based on Hencky's theory. However, these estimates require a priori knowledge of material properties and propagate large errors. Here we show, through a systematic atomic force microscopy study, several strategies that lead to vastly enhanced characterization of nanoblisters. First, we find that nanoblisters may contain both liquid and gas, resolving an ongoing debate in the literature. Second, we demonstrate how to definitively determine the membrane thickness of a nanoblister and show that Hencky's theory can only reliably predict membrane thicknesses for small aspect ratios and small membrane thicknesses. Third, we develop a novel technique to measure the internal pressures of nanoblisters, which quantitatively agrees with Hencky's theory but carries a 1 order smaller propagated error.

Intercalation, decomposition, entrapment - a new route to graphene nanobubbles

Graphene nanobubbles (GNBs) have become the subject of recent research due to their novel physical properties. However, present methods to create them involve either extreme conditions or complex sample fabrication. We present a novel approach which relies on the intercalation of small molecules (NH3), their surface-mediated decomposition and the formation of larger molecules (N2) which are then entrapped beneath the graphene in bubbles. Our hypothesised reaction mechanism requires the copper substrate, on which our graphene is grown via chemical vapour deposition (CVD), to be oxidised before the reaction can occur. This was confirmed through X-ray photoelectron spectroscopy (XPS) data of both oxidised and reduced Cu substrate samples. The GNBs have been analysed through atomic force microscopy (AFM, after NH3 treatment) and XPS, which reveals the formation of five distinct N 1s peaks, attributed to N2 entrapment, N doping species and atomic nitrogen bonded with the Cu within the substrate. This method is simple, occurs at low temperatures (520 K) and integrates very easily with conventional CVD graphene growth, so presents an opportunity to open up this field of research further.

Programmable graphene nanobubbles with three-fold symmetric pseudo-magnetic fields

Graphene nanobubbles (GNBs) have attracted much attention due to the ability to generate large pseudo-magnetic fields unattainable by ordinary laboratory magnets. However, GNBs are always randomly produced by the reported protocols, therefore, their size and location are difficult to manipulate, which restricts their potential applications. Here, using the functional atomic force microscopy (AFM), we demonstrate the ability to form programmable GNBs. The precision of AFM facilitates the location definition of GNBs, and their size and shape are tuned by the stimulus bias of AFM tip. With tuning the tip voltage, the bubble contour can gradually transit from parabolic to Gaussian profile. Moreover, the unique three-fold symmetric pseudo-magnetic field pattern with monotonous regularity, which is only theoretically predicted previously, is directly observed in the GNB with an approximately parabolic profile. Our study may provide an opportunity to study high magnetic field regimes with the designed periodicity in two dimensional materials.

Fibroin-like Peptides Self-Assembling on Two-Dimensional Materials as a Molecular Scaffold for Potential Biosensing

Self-assembled peptides have revealed uniform ordering on two-dimensional (2D) materials such as mica, graphene, and MoS₂ so far. These peptides are expected to be utilized as a molecular scaffold for biosensing based on 2D materials. However, the stability of the peptide structures on 2D materials under liquid has not been evaluated, and some of the previously reported peptides may have instability under water. In this work, by mimicking an amino-acid sequence of silk protein, we successfully developed peptide sequences that can maintain ordered nanostructures even after rinsing with deionized water. The structural stability was also proven under electrochemical bias, which is crucial as a biomolecular scaffold for practical biosensing with 2D materials. The stability probably arises from its β-sheet-like structures with improved intermolecular interactions and binding to the surface of 2D materials, resulting in the formation of stable domains of ordered peptide structures. Our peptides showed their ability to immobilize probe molecules for biosensing and inhibit nonspecific adsorption through their co-assembly process. Interestingly, we found two structural phases in the self-assembled structures, where only one of the phases reveals a binding affinity to target molecules.

Force Spectroscopy Revealed a High-Gas-Density State near the Graphite Substrate inside Surface Nanobubbles

The absorption of gas molecules at hydrophobic surfaces may have a special state and play an important role in many processes in interfacial physics, which has been rarely considered in previous theory. In this paper, force spectroscopic experiments were performed by a nanosized AFM probe penetrated into individual surface nanobubbles and contacted with a highly ordered pyrolytic graphite (HOPG) substrate. The results showed that the adhesion force at the gas/solid interface was much smaller than that in air measured with the same AFM probe. The adhesion data were further analyzed by the van der Waals force theory, and the result implied that the gas density near the substrate inside the surface nanobubbles was about 3 orders of magnitude higher than that under the standard pressure and temperature (STP). Our MD simulation indicated that the gas layers near the substrate exhibited a high-density state inside the surface nanobubbles. This high-density state may provide new insight into the understanding of the abnormal stability and contact angle of nanobubbles on hydrophobic surfaces, and have significant impact on their applications.

Modeling of the phase transition inside graphene nanobubbles filled with ethane

A liquid–gas phase transition of ethane inside graphene nanobubbles below the critical temperature leads to a ‘forbidden range’ of radii, in which no stable bubbles exist.

Preparation of α-Linolenic-Acid-Loaded Water-in-Oil-in-Water Microemulsion and Its Potential as a Fluorescent Delivery Carrier with a Free Label

Our previous work has demonstrated that α-linolenic acid (ALA)-loaded oil-in-water (O/W) microemulsion could enhance ALA antioxidant capacity. Meanwhile, we also observed that synthesized microemulsion itself had fluorescence. In this work, we have prepared a multiple water-in-oil-in-water (W/O/W) microemulsion to further enhance ALA antioxidant capacity and activate this delivery carrier application potential with a free label. The compositions of primary water-in-oil (W/O) microemulsion were obtained using pseudo-ternary phase diagrams, and then W/O/W microemulsion was prepared adopting the "two-step heterotherm method". The conductivity of W/O/W microemulsion was measured to lie between 250.0 and 350.0 μs/cm. The spherical droplets with a mean particle diameter of 10.0-20.0 nm were confirmed by transmission electron microscopy and dynamic light scattering. Nuclear magnetic resonance confirmed that ALA diffused to the multiple water-oily interface simultaneously. In addition, the in vitro release and antioxidant capacity measurements of ALA-loaded W/O/W microemulsion concluded the sustained-release effect and excellent antioxidant capacity. The fluorescent intensity of W/O/W microemulsion was markedly increased in comparison to O/W microemulsion. The synthesized microemulsion could lead to important applications and have advantages of a label-free fluorescent carrier for optical imaging purposes.

Mechanics of spontaneously formed nanoblisters trapped by transferred 2D crystals

Layered systems of 2D crystals and heterostructures are widely explored for new physics and devices. In many cases, monolayer or few-layer 2D crystals are transferred to a target substrate including other 2D crystals, and nanometer-scale blisters form spontaneously between the 2D crystal and its substrate. Such nanoblisters are often recognized as an indicator of good adhesion, but there is no consensus on the contents inside the blisters. While gas-filled blisters have been modeled and measured by bulge tests, applying such models to spontaneously formed nanoblisters yielded unrealistically low adhesion energy values between the 2D crystal and its substrate. Typically, gas-filled blisters are fully deflated within hours or days. In contrast, we found that the height of the spontaneously formed nanoblisters dropped only by 20-30% after 3 mo, indicating that probably liquid instead of gas is trapped in them. We therefore developed a simple scaling law and a rigorous theoretical model for liquid-filled nanoblisters, which predicts that the interfacial work of adhesion is related to the fourth power of the aspect ratio of the nanoblister and depends on the surface tension of the liquid. Our model was verified by molecular dynamics simulations, and the adhesion energy values obtained for the measured nanoblisters are in good agreement with those reported in the literature. This model can be applied to estimate the pressure inside the nanoblisters and the work of adhesion for a variety of 2D interfaces, which provides important implications for the fabrication and deformability of 2D heterostructures and devices.

Substantial Enhancement of the Antioxidant Capacity of an α-Linolenic Acid Loaded Microemulsion: Chemical Manipulation of the Oil-Water Interface by Carbon Dots and Its Potential Application

Various active ingredients play a crucial role in providing and supplementing the nutritional requirements of organisms. In this work, we attempted to chemically manipulate the interfacial microstructure of oil-water microemulsions (ME) with carbon dots (CDs), concentrating on substantially enhancing the antioxidant capacity of α-linolenic acid (ALA). To this end, CDs were synthesized and introduced into an ME. The molecular interaction of surfactant with CDs was investigated by Fourier-transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). The microstructure of the ME was monitored by transmission electron microscopy (TEM) and cryo-electron microscopy (cryo-EM). The cryo-EM result showed the oil-water interface in the ME was better defined after the CDs were loaded, and ¹H NMR proved the CDs were distributed mainly at the interface. On the basis of these results, interfacial models were proposed. Final evaluation results demonstrated the stabilizing effect and oxidation-inhibition ability of the ALA-loaded ME was substantially enhanced after the introduction of the CDs, indicating a "turn off" effect of the interface. Interestingly, CDs do not affect the in vitro release of ALA, indicating a "turn on" effect of the interface. This work provided a successful interface manipulation with a nanocarrier that can be used for a large diversity of food nutraceuticals.

Surface nanobubbles on the carbonate mineral dolomite

Analysis of surface nanobubbles on dolomite show that their pinning is affected by the surfactants using in mineral processing.

Charge Induced Dynamics of Water in a Graphene-Mica Slit Pore

We use atomic force microscopy to in situ investigate the dynamic behavior of confined water at the interface between graphene and mica. The graphene is either uncharged, negatively charged, or positively charged. At high humidity, a third water layer will intercalate between graphene and mica. When graphene is negatively charged, the interface fills faster with a complete three layer water film, compared to uncharged graphene. As charged positively, the third water layer dewets the interface, either by evaporation into the ambient or by the formation of three-dimensional droplets under the graphene, on top of the bilayer. Our experimental findings reveal novel phenomena of water at the nanoscale, which are interesting from a fundamental point of view and demonstrate the direct control over the wetting properties of the graphene/water interface.