Structure-Sensitive CO2 Electroreduction to Hydrocarbons on Ultrathin 5-fold Twinned Copper Nanowires

Single Entity Electrocatalysis

Making a measurement over millions of nanoparticles or exposed crystal facets seldom reports on reactivity of a single nanoparticle or facet, which may depart drastically from ensemble measurements. Within the past 30 years, science has moved toward studying the reactivity of single atoms, molecules, and nanoparticles, one at a time. This shift has been fueled by the realization that everything changes at the nanoscale, especially important industrially relevant properties like those important to electrocatalysis. Studying single nanoscale entities, however, is not trivial and has required the development of new measurement tools. This review explores a tale of the clever use of old and new measurement tools to study electrocatalysis at the single entity level. We explore in detail the complex interrelationship between measurement method, electrocatalytic material, and reaction of interest (e.g., carbon dioxide reduction, oxygen reduction, hydrazine oxidation, etc.). We end with our perspective on the future of single entity electrocatalysis with a key focus on what types of measurements present the greatest opportunity for fundamental discovery.

Grain-Boundary Engineering Boosted Undercoordinated Active Sites for Scalable Conversion of CO2 to Ethylene

The development of highly selective and energy efficient technologies for electrochemical CO2 reduction combined with renewable energy sources holds great promise for advancing the field of sustainable chemistry. The engineering of copper-based electrodes facilitates the conversion of CO2 into high-value multicarbon products (C2+). However, the ambiguous determination of the intrinsic CO2 activity and the maximization of the density of exposed active sites have severely limited the use of Cu for the realization of practical electrocatalytic devices. Here, we report a scalable strategy to obtain a high density of undercoordinated sites by maximizing the exposure of grain-boundary active sites using a direct chronoamperometric pulse method. Our numerical investigations predicted that grain boundaries modulate the adsorption behavior of *CO on the Cu surface, which acts as a key intermediate species associated with the production of multicarbon species. We investigated the consequence of grain-boundary density on dendric Cu catalysts (GB-Cu) by combining transmission electron microscopy, in situ Raman spectroscopy, and X-ray photoelectron spectroscopy with electrochemical measurements. A linear relationship between the Faradaic efficiency of the C2+ product and the presence of undercoordinated sites was observed, which allowed to directly quantify the contribution of the grain boundary in Cu-based catalysts on the CO2RR properties and the formation of multicarbon products. Using a membrane electrode assembly electrolyzer, the high grain-boundary density Cu electrodes achieved a maximum Faradaic efficiency of 73.2% for C2+ product formation and a full-cell energy efficiency of 20.2% at a specific current density of 303.6 mA cm-2. The GB-Cu was implemented in a 25 cm2 MEA electrolyzer and demonstrated selectivity of over 62% for 70 h together with current retention of 88.4% at the applied potential of -3.80 V. The catalysts and electrolyzer were further coupled to an InGaP/GaAs/Ge triple-junction solar cell to demonstrate a solar-to-fuel (STF) conversion efficiency of 8.33%. This work designed an undercoordinated Cu-based catalyst for the realization of solar-driven fuel production.

Toward Durable CO2 Electroreduction with Cu-Based Catalysts via Understanding Their Deactivation Modes

The technology of CO2 electrochemical reduction (CO2ER) provides a means to convert CO2, a waste greenhouse gas, into value-added chemicals. Copper is the most studied element that is capable of catalyzing CO2ER to obtain multicarbon products, such as ethylene, ethanol, acetate, etc., at an appreciable rate. Under the operating condition of CO2ER, the catalytic performance of Cu decays because of several factors that alters the surface properties of Cu. In this review, these factors that cause the degradation of Cu-based CO2ER catalysts are categorized into generalized deactivation modes, that are applicable to all electrocatalytic systems. The fundamental principles of each deactivation mode and the associated effects of each on Cu-based catalysts are discussed in detail. Structure- and composition-activity relationship developed from recent in situ/operando characterization studies are presented as evidence of related deactivation modes in operation. With the aim to address these deactivation modes, catalyst design and reaction environment engineering rationales are suggested. Finally, perspectives and remarks built upon the recent advances in CO2ER are provided in attempts to improve the durability of CO2ER catalysts.

Impact of the Surface Microenvironment on the Redox Properties of a Co-Based Molecular Cathode for Selective Aqueous Electrochemical CO2-to-CO Reduction

Electrode-confined molecular catalysts are promising systems to enable the efficient conversion of CO2 to useful products. Here, we describe the development of an original molecular cathode for CO2 reduction to CO based on the noncovalent integration of a tetraazamacrocyclic Co complex to a carbon nanotube-based matrix. Aqueous electrochemical characterization of the modified electrode allowed for clear observation of a change of redox behavior of the Co center as surface concentration was tuned, highlighting the impact of the catalyst microenvironment on its redox properties. The molecular cathode enabled efficient CO2-to-CO conversion in fully aqueous conditions, giving rise to a turnover number (TONCO) of up to 20 × 103 after 2 h of constant electrolysis at a mild overpotential (η = 450 mV) and with a faradaic efficiency for CO of about 95%. Post operando measurements using electrochemical techniques, inductively coupled plasma, X-ray photoelectron spectroscopy and X-ray absorption spectroscopy characterization of the films demonstrated that the catalysis remained of molecular nature, making this Co-based electrode a new promising alternative for molecular electrocatalytic conversion of CO2-to-CO in fully aqueous media.

Review on strategies for improving the added value and expanding the scope of CO2 electroreduction products

The electrochemical reduction of CO2 into value-added chemicals has been explored as a promising solution to realize carbon neutrality and inhibit global warming. This involves utilizing the electrochemical CO2 reduction reaction (CO2RR) to produce a variety of single-carbon (C1) and multi-carbon (C2+) products. Additionally, the electrolyte solution in the CO2RR system can be enriched with nitrogen sources (such as NO3-, NO2-, N2, or NO) to enable the synthesis of organonitrogen compounds via C-N coupling reactions. However, the electrochemical conversion of CO2 into valuable chemicals still faces challenges in terms of low product yield, poor faradaic efficiency (FE), and unclear understanding of the reaction mechanism. This review summarizes the promising strategies aimed at achieving selective production of diverse carbon-containing products, including CO, formate, hydrocarbons, alcohols, and organonitrogen compounds. These approaches involve the rational design of electrocatalysts and the construction of coupled electrocatalytic reaction systems. Moreover, this review presents the underlying reaction mechanisms, identifies the existing challenges, and highlights the prospects of the electrosynthesis processes. The aim is to offer valuable insights and guidance for future research on the electrocatalytic conversion of CO2 into carbon-containing products of enhanced value-added potential.

Synthesis of Rhenium-Doped Copper Twin Boundary for High-Turnover-Frequency Electrochemical Nitrogen Reduction

The precise design and synthesis of active sites to improve catalyst's performance has emerged as a promising tactic for electrochemistry. However, it is challenging to combine different types of active sites and manipulate them simultaneously at atomic resolution. Here, we present a strategy to synthesize Re atom-doped Cu twin boundaries (TBs), through pulsed electrodeposition and boundary segregation. The Re-doped Cu TBs demonstrate a highly efficient nitrogen reduction reaction (NRR) performance. Re-doped Cu TBs showed a turnover frequency of ∼5889 s-1, ∼800 times higher than the pure Cu TB active centers (∼7 s-1). In addition to the "acceptance-donation" activation of N2 molecules, theoretical calculations also reveal that the Re-Re dimer on TB can boost the NRR and impede the hydrogen evolution reaction synchronously, rendering Re-doped Cu TB catalysts with high NRR activity and selectivity.

Highly-exposed copper and ZIF-8 interface enables synthesis of hydrocarbons by electrocatalytic reduction of CO2

Electrochemical reduction of CO2 (CO2RR) to fuels and chemicals is a promising route to close the anthropogenic carbon cycle for sustainable society. The Cu-based catalysts in producing high-value hydrocarbons feature unique superiorities, yet challenges remain in achieving high selectivity. In this work, Cu@ZIF-8 NWs with highly-exposed Cu nanowires (Cu NWs) and ZIF-8 interface are synthesized via a surfactant-assisted method. Impressively, Cu@ZIF-8 NWs exhibit excellent stability and a high Faradaic efficiency of 57.5% toward hydrocarbons (CH4 and C2H4) at a potential of -0.7 V versus reversible hydrogen electrode. Computational calculations combining with experiments reveal the formation of Cu and ZIF-8 interface optimizes the adsorption of reaction intermediates, particularly stabilizing the formation of *CHO, thereby enabling efficient preference for hydrocarbons. This work highlights the potential of constructing metals and MOFs heterogeneous interfaces to enhance catalytic properties and offers valuable insights for the design of highly efficient CO2RR catalysts.

Hybrid oxide coatings generate stable Cu catalysts for CO2 electroreduction

Hybrid organic/inorganic materials have contributed to solve important challenges in different areas of science. One of the biggest challenges for a more sustainable society is to have active and stable catalysts that enable the transition from fossil fuel to renewable feedstocks, reduce energy consumption and minimize the environmental footprint. Here we synthesize novel hybrid materials where an amorphous oxide coating with embedded organic ligands surrounds metallic nanocrystals. We demonstrate that the hybrid coating is a powerful means to create electrocatalysts stable against structural reconstruction during the CO2 electroreduction. These electrocatalysts consist of copper nanocrystals encapsulated in a hybrid organic/inorganic alumina shell. This shell locks a fraction of the copper surface into a reduction-resistant Cu2+ state, which inhibits those redox processes responsible for the structural reconstruction of copper. The electrocatalyst activity is preserved, which would not be possible with a conventional dense alumina coating. Varying the shell thickness and the coating morphology yields fundamental insights into the stabilization mechanism and emphasizes the importance of the Lewis acidity of the shell in relation to the retention of catalyst structure. The synthetic tunability of the chemistry developed herein opens new avenues for the design of stable electrocatalysts and beyond.

Molecular Engineering of Copper Phthalocyanine for CO2 Electroreduction to Methane

Efficient electrochemical CO2 reduction reaction (ECO2RR) to multi-electron reductive products remains a great challenge. Herein, molecular engineering of copper phthalocyanines (CuPc) was explored by modifying electron-withdrawing groups (EWGs) (cyano, sulfonate anion) and electron-donating groups (EDGs) (methoxy, amino) to CuPc, then supporting onto carbon paper or carbon cloth by means of droplet coating, loading with carbon nanotubes and coating in polypyrrole (PPy). The results showed that the PPy-coated CuPc effectively catalysed ECO2RR to CH4. Interestingly, experimental results and DFT calculations indicated EWGs markedly improved the selectivity of methane for the reason that the introduction of EWGs reduces electron density of catalytic active center, resulting in a positive move to initial reduction potential. Otherwise, the modification of EDGs significantly reduces the selectivity towards methane. This electronic effect and heterogenization of CuPc are facile and effective molecular engineering, benefitting the preparation of electrocatalysts for further reduction of CO2.

Selective and Efficient CO2 Electroreduction to Formate on Copper Electrodes Modified by Cationic Gemini Surfactants

Electroreduction of CO2 into valuable chemicals and fuels is a promising strategy to mitigate energy and environmental problems. However, it usually suffers from unsatisfactory selectivity for a single product and inadequate electrochemical stability. Herein, we report the first work to use cationic Gemini surfactants as modifiers to boost CO2 electroreduction to formate. The selectivity, activity and stability of the catalysts can be all significantly enhanced by Gemini surfactant modification. The Faradaic efficiency (FE) of formate could reach up to 96 %, and the energy efficiency (EE) could achieve 71 % over the Gemini surfactants modified Cu electrode. In addition, the Gemini surfactants modified commercial Bi2 O3 nanosheets also showed an excellent catalytic performance, and the FE of formate reached 91 % with a current density of 510 mA cm-2 using the flow cell. Detailed studies demonstrated that the double quaternary ammonium cations and alkyl chains of the Gemini surfactants played a crucial role in boosting electroreduction CO2 , which can not only stabilize the key intermediate HCOO* but also provide an easy access for CO2 . These observations could shine light on the rational design of organic modifiers for promoted CO2 electroreduction.

Designing Surface and Interface Structures of Copper-Based Catalysts for Enhanced Electrochemical Reduction of CO2 to Alcohols

Electrochemical CO2 reduction (ECR) has emerged as a promising solution to address both the greenhouse effect caused by CO2 emissions and the energy shortage resulting from the depletion of nonrenewable fossil fuels. The production of multicarbon (C2+) products via ECR, especially high-energy-density alcohols, is highly desirable for industrial applications. Copper (Cu) is the only metal that produces alcohols with appreciable efficiency and kinetic viability in aqueous solutions. However, poor product selectivity is the main technical problem for applying the ECR technology in alcohol production. Extensive research has resulted in the rational design of electrocatalyst architectures using various strategies. This design significantly affects the adsorption energetics of intermediates and the reaction pathways for alcohol production. In this review, we focus on the design of effective catalysts for ECR to alcohols, discussing fundamental principles, innovative strategies, and mechanism understanding. Furthermore, the challenges and prospects in utilizing Cu-based materials for alcohol production via ECR are discussed.

Vitamin C-induced CO2 capture enables high-rate ethylene production in CO2 electroreduction

High-rate production of multicarbon chemicals via the electrochemical CO2 reduction can be achieved by efficient CO2 mass transport. A key challenge for C-C coupling in high-current-density CO2 reduction is how to promote *CO formation and dimerization. Here, we report molecularly enhanced CO2-to-*CO conversion and *CO dimerization for high-rate ethylene production. Nanoconfinement of ascorbic acid by graphene quantum dots enables immobilization and redox reversibility of ascorbic acid in heterogeneous electrocatalysts. Cu nanowire with ascorbic acid nanoconfined by graphene quantum dots (cAA-CuNW) demonstrates high-rate ethylene production with a Faradaic efficiency of 60.7% and a partial current density of 539 mA/cm2, a 2.9-fold improvement over that of pristine CuNW. Furthermore, under low CO2 ratio of 33%, cAA-CuNW still exhibits efficient ethylene production with a Faradaic efficiency of 41.8%. We find that cAA-CuNW increases *CO coverage and optimizes the *CO binding mode ensemble between atop and bridge for efficient C-C coupling. A mechanistic study reveals that ascorbic acid can facilitate *CO formation and dimerization by favorable electron and proton transfer with strong hydrogen bonding.

Stability Issues in Electrochemical CO2 Reduction: Recent Advances in Fundamental Understanding and Design Strategies

Electrochemical CO2 reduction reaction (CO2 RR) offers a promising approach to close the anthropogenic carbon cycle and store intermittent renewable energy in fuels or chemicals. On the path to commercializing this technology, achieving the long-term operation stability is a central requirement but still confronts challenges. This motivates to organize the present review to systematically discuss the stability issue of CO2 RR. This review starts from the fundamental understanding on the destabilization mechanisms of CO2 RR, with focus on the degradation of electrocatalyst and change of reaction microenvironment during continuous electrolysis. Subsequently, recent efforts on catalyst design to stabilize the active sites are summarized, where increasing atomic binding strength to resist surface reconstruction is highlighted. Next, the optimization of electrolysis system to enhance the operation stability by maintaining reaction microenvironment especially mitigating flooding and carbonate problems is demonstrated. The manipulation on operation conditions also enables to prolong CO2 RR lifespan through recovering catalytically active sites and mass transport process. This review finally ends up by indicating the challenges and future opportunities.

Toward high-efficiency photovoltaics-assisted electrochemical and photoelectrochemical CO2 reduction: Strategy and challenge

The realization of a complete techno-economy through a significant carbon dioxide (CO2) reduction in the atmosphere has been explored to promote a low-carbon economy in various ways. CO2 reduction reactions (CO2RRs) can be induced using sustainable energy, including electric and solar energy, using systems such as electrochemical (EC) CO2RR and photoelectrochemical (PEC) systems. This study summarizes various fabrication strategies for non-noble metal, copper-based, and metal-organic framework-based catalysts with excellent Faradaic efficiency (FE) for target carbon compounds, and for noble metals with low overvoltage. Although EC and PEC systems achieve high energy conversion efficiency with excellent catalysts, they still require external power and lack complete bias-free operation. Therefore, photovoltaics, which can overcome the limitations of these systems, have been introduced. The utilization of silicon and perovskite-based solar cells for photovoltaics-assisted EC (PV-EC) and photovoltaics-assisted PEC (PV-PEC) CO2RR systems are cost-efficient, and the III-V semiconductor photoabsorbers achieved high solar-to-carbon efficiency. This work focuses on PV-EC and PV-PEC CO2RR systems and their components and then summarizes the special cell configurations, including the tandem and stacked structures. Additionally, the study discusses current issues, such as low energy conversion, expensive PV, theoretical limits, and industrial scale-up, along with proposed solutions.

Cu2O/SnO2 Heterostructures: Role of the Synthesis Procedure on PEC CO2 Conversion

Addressing the urgent need to mitigate increasing levels of CO₂ in the atmosphere and combat global warming, the development of earth-abundant catalysts for selective photo-electrochemical CO₂ conversion is a central and pressing challenge. Toward this purpose, two synthetic strategies for obtaining a Cu₂O-SnO₂ catalyst, namely co-precipitation and core-shell methods, were compared. The morphology and band gap energy of the synthesized materials were strongly different. The photoactivity of the core-shell catalyst was improved by 30% compared to the co-precipitation one, while its selectivity was shifted towards C₁ products such as CO and formate. The stability of both catalysts was revealed by an easy and fast EIS analysis, indicating how the effective presence of a SnO₂ shell could prevent the modification of the crystalline phase of the catalyst during PEC tests. Finally, directing the selectivity depending on the synthesis method used to produce the final Cu₂O-SnO₂ catalyst could possibly be implemented in syngas and formate transformation processes, such as hydroformylation or the Fischer-Tropsch process.

Copper Cobalt Selenide as a Bifunctional Electrocatalyst for the Selective Reduction of CO2 to Carbon-Rich Products and Alcohol Oxidation

Copper cobalt selenide, CuCo2Se4, has been identified as an efficient catalyst for electrocatalytic CO2 reduction, exhibiting high selectivity for carbon-rich and value-added products. Achieving product selectivity is one of the primary challenges for CO2 reduction reactions, and the catalyst surface plays a pivotal role in determining the reaction pathway and, more importantly, the intermediate adsorption kinetics leading to C1- or C2+-based products. In this research, the catalyst surface was designed to optimize the adsorption of the intermediate CO (carbonyl) group on the catalytic site such that its dwell time on the surface was long enough for further reduction to carbon-rich products but not strong enough for surface passivation and poisoning. CuCo2Se4 was synthesized through hydrothermal method, and the assembled electrode showed the electrocatalytic reduction of CO2 at various applied potentials ranging from -0.1 to -0.9 V vs RHE. More importantly, it was observed that the CuCo2Se4-modified electrode could produce exclusive C2 products such as acetic acid and ethanol with 100% faradaic efficiency at a lower applied potential (-0.1 to -0.3 V), while C1 products such as formic acid and methanol were obtained at higher applied potentials (-0.9 V). Such high selectivity and preference for acetic acid and ethanol formation highlight the novelty of this catalyst. The catalyst surface was also probed through density functional theory (DFT) calculations, and the high selectivity for C2 product formation could be attributed to the optimal CO adsorption energy on the catalytic site. It was further estimated that the Cu site showed a better catalytic activity than Co; however, the presence of neighboring Co atoms with the residual magnetic moment on the surface and subsurface layers influenced the charge density redistribution on the catalytic site after intermediate CO adsorption. In addition to CO2 reduction, this catalytic site was also active for alcohol oxidation producing formic or acetic acid from methanol or ethanol, respectively, in the anodic chamber. This report not only illustrates the highly efficient catalytic activity of CuCo2Se4 for CO2 reduction with high product selectivity but also offers a proper insight of the catalyst surface design and how to obtain such high selectivity, thereby providing knowledge that can be transformative for the field.

Alloying as a Strategy to Boost the Stability of Copper Nanocatalysts during the Electrochemical CO2 Reduction Reaction

Copper nanocatalysts are among the most promising candidates to drive the electrochemical CO₂ reduction reaction (CO₂RR). However, the stability of such catalysts during operation is sub-optimal, and improving this aspect of catalyst behavior remains a challenge. Here, we synthesize well-defined and tunable CuGa nanoparticles (NPs) and demonstrate that alloying Cu with Ga considerably improves the stability of the nanocatalysts. In particular, we discover that CuGa NPs containing 17 at. % Ga preserve most of their CO₂RR activity for at least 20 h while Cu NPs of the same size reconstruct and lose their CO₂RR activity within 2 h. Various characterization techniques, including X-ray photoelectron spectroscopy and operando X-ray absorption spectroscopy, suggest that the addition of Ga suppresses Cu oxidation at open-circuit potential (ocp) and induces significant electronic interactions between Ga and Cu. Thus, we explain the observed stabilization of the Cu by Ga as a result of the higher oxophilicity and lower electronegativity of Ga, which reduce the propensity of Cu to oxidize at ocp and enhance the bond strength in the alloyed nanocatalysts. In addition to addressing one of the major challenges in CO₂RR, this study proposes a strategy to generate NPs that are stable under a reducing reaction environment.

What do we talk about, when we talk about single-crystal termination-dependent selectivity of Cu electrocatalysts for CO2 reduction? A data-driven retrospective

We mine from the literature experimental data on the CO₂ electrochemical reduction selectivity of Cu single crystal surfaces. We then probe the accuracy of a machine learning model trained to predict faradaic efficiencies for 11 CO₂ reduction reaction products, as a function of the applied voltage at which the reaction takes place, and the relative amounts of non equivalent surface sites, distinguished according to their nominal coordination. A satisfactory model accuracy is found only when discriminating data according to their provenance. On one hand, this result points at a qualitative agreement across reported experimental CO₂ reduction reactions trends for single-crystal surfaces with well-defined terminations. On the other, this finding hints at the presence of differences in nominally identical catalysts and/or CO₂ reduction reaction measurements, which result in quantitative disagreement between experiments.

Copper and silver nanowires for CO2 electroreduction

Copper and silver nanowires have been extensively investigated as the next generation of transparent conductive electrodes (TCEs) due to their ability to form percolating networks. Recently, they have been exploited as electrocatalysts for CO2 reduction. In this review, we present the most recent advances in this field summarizing different strategies used for the synthesis and functionalization/activation of copper and silver nanowires, as well as, the state of the art of their electrochemical performance with particular emphasis on the effect of the nanowire morphology. Novel perspectives for the development of highly efficient, selective, and stable electrocatalysts for CO2 reduction arise from the translation of NW-based TCEs in this challenging field.

Research Progress of Copper-Based Bimetallic Electrocatalytic Reduction of CO2

Fossil fuels are still the main source of energy in today’s society, so emissions of CO2 are inevitable, but when the CO2 level in the atmosphere is too high, many environmental problems will arise, such as the greenhouse effect, among others. Electrocatalytic reduction of CO2 is one of the most important methods that one can use to reduce the amount of CO2 in the atmosphere. This paper reviews bimetallic catalysts prepared on the basis of copper materials, such as Ag, Au, Zn and Ni. The effects of different ratios of metal atoms in the bimetallic catalysts on the selectivity of CO2RR were investigated and the effects of bimetallic catalysts on the CO2RR of different ligands were also analysed. Finally, this paper points out that the real reaction of CO2RR still needs to be studied and analysed, and the effect of the specific reaction environment on selectivity has not been thoroughly studied. This article also describes some of the problems encountered so far.

Electronic Perturbation of Copper Single-Atom CO2 Reduction Catalysts in a Molecular Way

Fine-tuning electronic structures of single-atom catalysts (SACs) plays a crucial role in harnessing their catalytic activities, yet challenges remain at a molecular scale in a controlled fashion. By tailoring the structure of graphdiyne (GDY) with electron-withdrawing/-donating groups, we show herein the electronic perturbation of Cu single-atom CO₂ reduction catalysts in a molecular way. The elaborately introduced functional groups (-F, -H and -OMe) can regulate the valance state of Cu^δ+ , which is found to be directly scaled with the selectivity of the electrochemical CO₂ -to-CH₄ conversion. An optimum CH₄ Faradaic efficiency of 72.3 % was achieved over the Cu SAC on the F-substituted GDY. In situ spectroscopic studies and theoretical calculations revealed that the positive Cu^δ+ centers adjusted by the electron-withdrawing group decrease the pK_a of adsorbed H₂ O, promoting the hydrogenation of intermediates toward the CH₄ production. Our strategy paves the way for precise electronic perturbation of SACs toward efficient electrocatalysis.

Comparative Spectroscopic Study Revealing Why the CO2 Electroreduction Selectivity Switches from CO to HCOO- at Cu-Sn- and Cu-In-Based Catalysts

To address the challenge of selectivity toward single products in Cu-catalyzed electrochemical CO₂ reduction, one strategy is to incorporate a second metal with the goal of tuning catalytic activity via synergy effects. In particular, catalysts based on Cu modified with post-transition metals (Sn or In) are known to reduce CO₂ selectively to either CO or HCOO^- depending on their composition. However, it remains unclear exactly which factors induce this switch in reaction pathways and whether these two related bimetal combinations follow similar general structure-activity trends. To investigate these questions systematically, Cu-In and Cu-Sn bimetallic catalysts were synthesized across a range of composition ratios and studied in detail. Compositional and morphological control was achieved via a simple electrochemical synthesis approach. A combination of operando and quasi-in situ spectroscopic techniques, including X-ray photoelectron, X-ray absorption, and Raman spectroscopy, was used to observe the dynamic behaviors of the catalysts' surface structure, composition, speciation, and local environment during CO₂ electrolysis. The two systems exhibited similar selectivity dependency on their surface composition. Cu-rich catalysts produce mainly CO, while Cu-poor catalysts were found to mainly produce HCOO^-. Despite these similarities, the speciation of Sn and In at the surface differed from each other and was found to be strongly dependent on the applied potential and the catalyst composition. For Cu-rich compositions optimized for CO production (Cu₈₅In₁₅ and Cu₈₅Sn₁₅), indium was present predominantly in the reduced metallic form (In⁰), whereas tin mainly existed as an oxidized species (Sn^2/4+). Meanwhile, for the HCOO^--selective compositions (Cu₂₅In₇₅ and Cu₄₀Sn₆₀), the indium exclusively exhibited In⁰ regardless of the applied potential, while the tin was reduced to metallic (Sn⁰) only at the most negative applied potential, which corresponds to the best HCOO^- selectivity. Furthermore, while Cu₄₀Sn₆₀ enhances HCOO^- selectivity by inhibiting H₂ evolution, Cu₂₅In₇₅ improves the HCOO^- selectivity at the expense of CO production. Due to these differences, we contend that identical mechanisms cannot be used to explain the behavior of these two bimetallic systems (Cu-In and Cu-Sn). Operando surface-enhanced Raman spectroscopy measurements provide direct evidence of the local alkalization and its impact on the dynamic transformation of oxidized Cu surface species (Cu₂O/CuO) into a mixture of Cu(OH)₂ and basic Cu carbonates [Cu_x(OH)_y(CO₃)_y] rather than metallic Cu under CO₂ electrolysis. This study provides unique insights into the origin of the switch in selectivity between CO and HCOO^- pathways at Cu bimetallic catalysts and the nature of surface-active sites and key intermediates for both pathways.

Current state of copper-based bimetallic materials for electrochemical CO2 reduction: a review

The increasing CO₂ concentration in the atmosphere has caused profound environmental issues such as global warming. The use of CO₂ as a feedstock to replace traditional fossil sources holds great promise to reduce CO₂ emissions. The electrochemical conversion of CO₂ has attracted much attention because it can be powered by renewable sources such as solar energy. In this review article, we provide insight into the important parameters when studying CO₂RR and give a comprehensive review on the description of synthesis methods with electrocatalytic CO₂ reduction over bimetallic copper-based materials. Due to the important bibliographic data on Cu bimetallic materials, we have limited this review to Sn, In, Pd, Zn and Ag. At the end of this review, challenges and perspectives for further upgrading have been included to briefly highlight the important future considerations of this rapidly growing technology.

The increasing CO₂ concentration in the atmosphere has caused profound environmental issues such as global warming.

Copper-Based Catalysts for Electrochemical Carbon Dioxide Reduction to Multicarbon Products

Electrochemical conversion of carbon dioxide into fuel and chemicals with added value represents an appealing approach to reduce the greenhouse effect and realize a carbon-neutral cycle, which has great potential in mitigating global warming and effectively storing renewable energy. The electrochemical CO2 reduction reaction (CO2RR) usually involves multiproton coupling and multielectron transfer in aqueous electrolytes to form multicarbon products (C2+ products), but it competes with the hydrogen evolution reaction (HER), which results in intrinsically sluggish kinetics and a complex reaction mechanism and places higher requirements on the design of catalysts. In this review, the advantages of electrochemical CO2 reduction are briefly introduced, and then, different categories of Cu-based catalysts, including monometallic Cu catalysts, bimetallic catalysts, metal-organic frameworks (MOFs) along with MOF-derived catalysts and other catalysts, are summarized in terms of their synthesis method and conversion of CO2 to C2+ products in aqueous solution. The catalytic mechanisms of these catalysts are subsequently discussed for rational design of more efficient catalysts. In response to the mechanisms, several material strategies to enhance the catalytic behaviors are proposed, including surface facet engineering, interface engineering, utilization of strong metal-support interactions and surface modification. Based on the above strategies, challenges and prospects are proposed for the future development of CO2RR catalysts for industrial applications.

Graphical Abstract

In situ probing the dynamic reconstruction of copper-zinc electrocatalysts for CO2 reduction

Unravelling the dynamic characterization of electrocatalysts during the electrochemical CO₂ reduction reaction (CO₂RR) is a critical factor to improve the production efficiency and selectivity, since most pre-electrocatalysts undergo structural reconstruction and surface rearrangement under working conditions. Herein, a series of pre-electrocatalysts including CuO, ZnO and two different ratios of CuO/ZnO were systematically designed by a sputtering process to clarify the correlation of the dynamic characterization of Cu sites in the presence of Zn/ZnO and the product profile. The evidence provided by in situ X-ray absorption spectroscopy (XAS) indicated that appropriate Zn/ZnO levels could induce a variation in the coordination number of Cu sites via reversing Ostwald ripening. Specifically, the recrystallized Cu site with a lower coordination number exhibited a preferential production of methane (CH₄). More importantly, our findings provide a promising approach for the efficient production of CH₄ by in situ reconstructing Cu-based binary electrocatalysts.

Steering surface reconstruction of copper with electrolyte additives for CO2 electroreduction

Electrocatalytic CO₂ reduction to value-added hydrocarbon products using metallic copper (Cu) catalysts is a potentially sustainable approach to facilitate carbon neutrality. However, Cu metal suffers from unavoidable and uncontrollable surface reconstruction during electrocatalysis, which can have either adverse or beneficial effects on its electrocatalytic performance. In a break from the current catalyst design path, we propose a strategy guiding the reconstruction process in a favorable direction to improve the performance. Typically, the controlled surface reconstruction is facilely realized using an electrolyte additive, ethylenediamine tetramethylenephosphonic acid, to substantially promote CO₂ electroreduction to CH₄ for commercial polycrystalline Cu. As a result, a stable CH₄ Faradaic efficiency of 64% with a partial current density of 192 mA cm⁻², thus enabling an impressive CO₂-to-CH₄ conversion rate of 0.25 µmol cm⁻² s⁻¹, is achieved in an alkaline flow cell. We believe our study will promote the exploration of electrochemical reconstruction and provide a promising route for the discovery of high-performance electrocatalysts.

Cu metal suffers from unavoidable and uncontrollable surface reconstruction during electrocatalysis. The authors here guide the reconstruction process in a favorable direction using trace amount of electrolyte additives, promoting CO₂ electroreduction to CH₄.

Controlled Synthesis of Intermetallic Au2 Bi Nanocrystals and Au2 Bi/Bi Hetero-Nanocrystals with Promoted Electrocatalytic CO2 Reduction Properties

The electrocatalytic properties of metal nanoparticles (NPs) strongly depend on their compositions and structures. Rational design of alloys and/or heterostructures provides additional approaches to modifying their surface geometric and electronic structures for optimized electrocatalytic performance. Here, a solution synthesis of freestanding intermetallic Au₂ Bi NPs, the heterostructures of Au₂ Bi/Bi hetero-NPs, and their promoted electrocatalytic CO₂ reduction reaction (CO₂ RR) performances were reported. It was revealed that the formation and in-situ conversion of heterogeneous seeds (e. g., Au) were of vital importance for the formation of intermetallic Au₂ Bi and Au₂ Bi/Bi hetero-NPs. It was also found that the Au components would act as the structure promoter moderating the binding strength for key intermediates on Bi surfaces. The alloying of Bi with Au and the formation of heterogeneous Au₂ Bi/Bi interfaces would create more surface active sites with modulated electronic structures and stronger adsorption strengths for key intermediates, promoting the CO₂ -to-HCOOH conversion with high activity and selectivity. This work presents a novel route for preparing intermetallic nanomaterials with modulated surface geometric/electric structures and promoting their electrocatalytic activities with alloying effects and interfacial effects. Such strategy may find wide application in catalyst design and synthesis for more electrocatalytic reactions.

Understanding Synthesis and Structural Variation of Nanomaterials Through In Situ/Operando XAS and SAXS

Nanostructured materials with high surface area and low coordinated atoms present distinct intrinsic properties from their bulk counterparts. However, nanomaterials' nucleation/growth mechanism during the synthesis process and the changes of the nanomaterials in the working state are still not thoroughly studied. As two indispensable methods, X-ray absorption spectroscopy (XAS) provides nanomaterials' electronic structure and coordination environment, while small-angle X-ray scattering (SAXS) offers structural properties and morphology information. A combination of in situ/operando XAS and SAXS provides high temporal and spatial resolution to monitor the evolution of nanomaterials. This review gives a brief introduction to in situ/operando SAXS/XAS cells. In addition, the application of in situ/operando XAS and SAXS in preparing nanomaterials and studying changes of working nanomaterials are summarized.

Photoelectrochemical CO2 Reduction toward Multicarbon Products with Silicon Nanowire Photocathodes Interfaced with Copper Nanoparticles

The development of photoelectrochemical systems for converting CO₂ into chemical feedstocks offers an attractive strategy for clean energy storage by directly utilizing solar energy, but selectivity and stability for these systems have thus been limited. Here, we interface silicon nanowire (SiNW) photocathodes with a copper nanoparticle (CuNP) ensemble to drive efficient photoelectrochemical CO₂ conversion to multicarbon products. This integrated system enables CO₂-to-C₂H₄ conversion with faradaic efficiency approaching 25% and partial current densities above 2.5 mA/cm² at -0.50 V vs RHE, while the nanowire photocathodes deliver 350 mV of photovoltage under 1 sun illumination. Under 50 h of continual bias and illumination, CuNP/SiNW can sustain stable photoelectrochemical CO₂ reduction. These results demonstrate the nanowire/catalyst system as a powerful modular platform to achieve stable photoelectrochemical CO₂ reduction and the feasibility to facilitate complex reactions toward multicarbons using generated photocarriers.

Structure-Function Correlation and Dynamic Restructuring of Cu for Highly Efficient Electrochemical CO2 Conversion

The increasing global demand for sustainable energy sources and emerging environmental issues have pushed the development of energy conversion and storage technologies to the forefront of chemical research. Electrochemical carbon dioxide (CO₂ ) conversion provides an attractive approach to synthesizing fuels and chemical feedstocks using renewable energy. On the path to deploying this technology, basic and applied scientific hurdles remain. Copper, as the only metal catalyst that is capable to produce C₂₊ fuels from CO₂ reduction (CO₂ R), still faces challenges in the improvement of electrosynthesis pathways for highly selective fuel production. In this regard, mechanistically understanding CO₂ R on Cu-based electrocatalysts, particularly identifying the structure-function correlation, is crucial. Here, a broad view of the variable structural parameters and their complex interplay in CO₂ R catalysis on Cu was given, with the purpose of providing deep insights and guiding the future rational design of CO₂ R electrocatalysts. First, this Review described the progress and recent advances in the development of well-defined nanostructured catalysts and the mechanistic understanding on the influences from a particular structure of a catalyst, such as facet, defects, morphology, oxidation state, composition, and interface. Next, the in-situ dynamic restructuring of Cu was presented. The importance of operando characterization methods to understand the catalyst structure-sensitivity was also discussed. Finally, some perspectives on the future outlook for electrochemical CO₂ R were offered.

The Interactive Dynamics of Nanocatalyst Structure and Microenvironment during Electrochemical CO2 Conversion

In the pursuit of a decarbonized society, electrocatalytic CO₂ conversion has drawn tremendous research interest in recent years as a promising route to recycling CO₂ into more valuable chemicals. To achieve high catalytic activity and selectivity, nanocatalysts of diverse structures and compositions have been designed. However, the dynamic structural transformation of the nanocatalysts taking place under operating conditions makes it difficult to study active site configurations present during the CO₂ reduction reaction (CO₂RR). In addition, although recognized as consequential to the catalytic performance, the reaction microenvironment generated near the nanocatalyst surface during CO₂RR and its impact are still an understudied research area. In this Perspective, we discuss current understandings and difficulties associated with investigating such dynamic aspects of both the surface reaction site and its surrounding reaction environment as a whole. We further highlight the interactive influence of the structural transformation and the microenvironment on the catalytic performance of nanocatalysts. We also present future research directions to control the structural evolution of nanocatalysts and tailor their reaction microenvironment to achieve an ideal catalyst for improved electrochemical CO₂RR.

Surface Reconstruction with a Sandwich-like C/Cu/C Catalyst for Selective and Stable CO2 Electroreduction

For the steady electroreduction of carbon dioxide (CO₂RR) to value-added chemicals with high efficiency, the uncontrollable surface reconstruction under highly reducing conditions is a critical issue in electrocatalyst design. Herein, we construct a catalyst model with a sandwich-like structure composed of highly reactive metallic Cu nanosheet that is confined in thin carbon layers (denoted as C/Cu/C nanosheet). The sandwich-like C/Cu/C nanosheet avoids the oxidation of the active site of metallic Cu at an ambient atmosphere owing to the protective coating of the carbon layer, which inhibits the surface reconstruction that occurs via the dissolution of copper oxides and redeposition of dissolved Cu ions. The as-prepared C/Cu/C nanosheet exhibits a prominent Faradaic efficiency (FE) of 47.8% for CH₄ products at -1.0 V with a current density of 20.3 mA·cm^-2 and stable production of CH₄ during 12 h operation with negligible selectivity loss. Our findings provide an effective strategy of restraining surface reconstruction for the design of selective and stable electrocatalysts toward CO₂RR.

Shaping Copper Nanocatalysts to Steer Selectivity in the Electrochemical CO2 Reduction Reaction

The carbon-neutral production of fuels and chemical feedstocks is one of the grand challenges for our society to solve. The electrochemical conversion of CO₂ is emerging as a promising technology contributing to this goal. Despite the huge amount of progress made over the past decade, selectivity still remains a challenge. This Account presents an overview of recent progress in the design of selective catalysts by exploiting the structural sensitivity of the electrochemical CO₂ reduction reaction (CO₂RR). In particular, it shows that the accurate and precise control of the shape and size of Cu nanocatalysts is instrumental in understanding and in discovering the structure-selectivity relationships governing the reduction of CO₂ to valuable hydrocarbons, such as methane and ethylene. It further illustrates the use of faceted Cu nanocatalysts to interrogate catalytic pathways and to increase selectivity toward oxygenates, such as ethanol, in the framework of tandem schemes. The last part of the Account highlights the role of well-defined nanocatalysts in identifying reconstruction mechanisms which might occur during operation. An outlook for the emerging paradigms which will empower the design of novel catalysts for CO₂RR concludes the Account.

ZnSn nanocatalyst: Ultra-high formate selectivity from CO2 electrochemical reduction and the structure evolution effect

The introduction of tin (Sn) into Zn-based catalyst can change its intrinsic properties of the electrochemically reduction of CO₂ to CO, obtaining a high formate yield. The electron transfer from Zn to Sn lowers down the d-band center of Sn, leading to a more reliable surface adsorption of the *OCHO intermediate and high formate selectivity. The obtained ZnSn catalyst enables formate formation with a drastically boosted Faradaic efficiency (FE) up to 94%, which is 2.04 and 1.34 times of pure Zn and Sn foils, respectively, indicating a synergistic effect between Zn and Sn. During the electrochemical CO₂ reduction reaction (eCO₂RR) process, the morphology of the ZnSn catalyst evolved from nanoparticles to nanosheets, nanoneedles and collapsed structures, corresponding to the activation, stabilization and decay stages, respectively. This study provides a facile and controllable approach for the construction of novel bimetallic catalyst favoring formate selectivity based on the synergistic effect.

A metal-supported single-atom catalytic site enables carbon dioxide hydrogenation

Nitrogen-doped graphene-supported single atoms convert CO₂ to CO, but fail to provide further hydrogenation to methane - a finding attributable to the weak adsorption of CO intermediates. To regulate the adsorption energy, here we investigate the metal-supported single atoms to enable CO₂ hydrogenation. We find a copper-supported iron-single-atom catalyst producing a high-rate methane. Density functional theory calculations and in-situ Raman spectroscopy show that the iron atoms attract surrounding intermediates and carry out hydrogenation to generate methane. The catalyst is realized by assembling iron phthalocyanine on the copper surface, followed by in-situ formation of single iron atoms during electrocatalysis, identified using operando X-ray absorption spectroscopy. The copper-supported iron-single-atom catalyst exhibits a CO₂-to-methane Faradaic efficiency of 64% and a partial current density of 128 mA cm^-2, while the nitrogen-doped graphene-supported one produces only CO. The activity is 32 times higher than a pristine copper under the same conditions of electrolyte and bias.

Simultaneous Successive Twinning Captured by Atomic Electron Tomography

Shape-controlled synthesis of multiply twinned nanostructures is heavily emphasized in nanoscience, in large part due to the desire to control the size, shape, and terminating facets of metal nanoparticles for applications in catalysis. Direct control of the size and shape of solution-grown nanoparticles relies on an understanding of how synthetic parameters alter nanoparticle structures during synthesis. However, while outcome populations can be effectively studied with standard electron microscopy methods, transient structures that appear during some synthetic routes are difficult to study using conventional high resolution imaging methods due to the high complexity of the 3D nanostructures. Here, we have studied the prevalence of transient structures during growth of multiply twinned particles and employed atomic electron tomography to reveal the atomic-scale three-dimensional structure of a Pd nanoparticle undergoing a shape transition. By identifying over 20 000 atoms within the structure and classifying them according to their local crystallographic environment, we observe a multiply twinned structure consistent with a simultaneous successive twinning from a decahedral to icosahedral structure.

Surface Hydrides on Fe2P Electrocatalyst Reduce CO2 at Low Overpotential: Steering Selectivity to Ethylene Glycol

Development of efficient electrocatalysts for the CO₂ reduction reaction (CO₂RR) to multicarbon products has been constrained by high overpotentials and poor selectivity. Here, we introduce iron phosphide (Fe₂P) as an earth-abundant catalyst for the CO₂RR to mainly C₂-C₄ products with a total CO₂RR Faradaic efficiency of 53% at 0 V vs RHE. Carbon product selectivity is tuned in favor of ethylene glycol formation with increasing negative bias at the expense of C₃-C₄ products. Both Grand Canonical-DFT (GC-DFT) calculations and experiments reveal that *formate, not *CO, is the initial intermediate formed from surface phosphino-hydrides and that the latter form ionic hydrides at both surface phosphorus atoms (H@P_s) and P-reconstructed Fe₃ hollow sites (H@P*). Binding of these surface hydrides weakens with negative bias (reactivity increases), which accounts for both the shift to C₂ products over higher C-C coupling products and the increase in the H₂ evolution reaction (HER) rate. GC-DFT predicts that phosphino-hydrides convert *formate to *formaldehyde, the key intermediate for C-C coupling, whereas hydrogen atoms on Fe generate tightly bound *CO via sequential PCET reactions to H₂O. GC-DFT predicts the peak in CO₂RR current density near -0.1 V is due to a local maximum in the binding affinity of *formate and *formaldehyde at this bias, which together with the more labile C₂ product affinity, accounts for the shift to ethylene glycol and away from C₃-C₄ products. Consistent with these predictions, addition of exogenous CO is shown to block all carbon product formation and lower the HER rate. These results demonstrate that the formation of ionic hydrides and their binding affinity, as modulated by the applied potential, controls the carbon product distribution. This knowledge provides new insight into the influence of hydride speciation and applied bias on the chemical reaction mechanism of CO₂RR that is relevant to all transition metal phosphides.

Electrochemical CO2 Reduction on Cu: Synthesis-Controlled Structure Preference and Selectivity

The electrochemical CO2 reduction reaction (ECO2 RR) on Cu catalysts affords high-value-added products and is therefore of great practical significance. The outcome and kinetics of ECO2 RR remain insufficient, requiring essentially the optimized structure design for the employed Cu catalyst, and also the fine synthesis controls. Herein, synthesis-controlled structure preferences and the modulation of intermediate's interactions are considered to provide synthesis-related insights on the design of Cu catalysts for selective ECO2 RR. First, the origin of ECO2 RR intermediate-dominated selectivity is described. Advanced structural engineering approaches, involving alloy/compound formation, doping/defect introduction, and the use of specific crystal facets/amorphization, heterostructures, single-atom catalysts, surface modification, and nano-/microstructures, are then reviewed. In particular, these structural engineering approaches are discussed in association with diversified synthesis controls, and the modulation of intermediate generation, adsorption, reaction, and additional effects. The results pertaining to synthetic methodology-controlled structural preferences and the correspondingly motivated selectivity are further summarized. Finally, the current opportunities and challenges of Cu catalyst fabrication for highly selective ECO2 RR are discussed.