Crystal Structure Induced Preferential Surface Alloying of Sb on Wurtzite/Zinc Blende GaAs Nanowires

Tuneable 2D surface Bismuth incorporation on InAs nanosheets

The chemical bonding at the interface between compound semiconductors and metals is central in determining electronic and optical properties. In this study, new opportunities for controlling this are presented for nanostructures. We investigate Bi adsorption on 2D wurtzite InAs (112̄0) nanosheets and find that temperature-controlled Bi incorporation in either anionic- or cationic-like bonding is possible in the easily accesible range between room temperature and 400 °C. This separation could not be achieved for ordinary zinc blende InAs(110) surfaces. As the crystal structures of the two surfaces have identical nearest neighbour configurations, this indicates that overall geometric differences can significantly alter the adsorption and incorporation. Ab initio theoretical modelling confirms observed adsorption results, but indicate that both the formation energies as well as kinetic barriers contributes to the observed temperature dependent behaviour. Further, we find that the Bi adsorption rate can differ by at least 2.5 times between the two InAs surfaces while being negligible for standard Si substrates under similar deposition conditions. This, in combination with the observed interface control, provides an excellent opportunity for tuneable Bi integration on 2D InAs nanostructures on standard Si substrates.

A 2D Bismuth-Induced Honeycomb Surface Structure on GaAs(111)

Two-dimensional (2D) topological insulators have fascinating physical properties which are promising for applications within spintronics. In order to realize spintronic devices working at room temperature, materials with a large nontrivial gap are needed. Bismuthene, a 2D layer of Bi atoms in a honeycomb structure, has recently attracted strong attention because of its record-large nontrivial gap, which is due to the strong spin-orbit coupling of Bi and the unusually strong interaction of the Bi atoms with the surface atoms of the substrate underneath. It would be a significant step forward to be able to form 2D materials with properties such as bismuthene on semiconductors such as GaAs, which has a band gap size relevant for electronics and a direct band gap for optical applications. Here, we present the successful formation of a 2D Bi honeycomb structure on GaAs, which fulfills these conditions. Bi atoms have been incorporated into a clean GaAs(111) surface, with As termination, based on Bi deposition under optimized growth conditions. Low-temperature scanning tunneling microscopy and spectroscopy (LT-STM/S) demonstrates a well-ordered large-scale honeycomb structure, consisting of Bi atoms in a √3 × √3 30° reconstruction on GaAs(111). X-ray photoelectron spectroscopy shows that the Bi atoms of the honeycomb structure only bond to the underlying As atoms. This is supported by calculations based on density functional theory that confirm the honeycomb structure with a large Bi-As binding energy and predict Bi-induced electronic bands within the GaAs band gap that open up a gap of nontrivial topological nature. STS results support the existence of Bi-induced states within the GaAs band gap. The GaAs:Bi honeycomb layer found here has a similar structure as previously published bismuthene on SiC or on Ag, though with a significantly larger lattice constant and only weak Bi-Bi bonding. It can therefore be considered as an extreme case of bismuthene, which is fundamentally interesting. Furthermore, it has the same exciting electronic properties, opening a large nontrivial gap, which is the requirement for room-temperature spintronic applications, and it is directly integrated in GaAs, a direct band gap semiconductor with a large range of (opto)electronic devices.

Self-selective formation of ordered 1D and 2D GaBi structures on wurtzite GaAs nanowire surfaces

Scaling down material synthesis to crystalline structures only few atoms in size and precisely positioned in device configurations remains highly challenging, but is crucial for new applications e.g., in quantum computing. We propose to use the sidewall facets of larger III–V semiconductor nanowires (NWs), with controllable axial stacking of different crystal phases, as templates for site-selective growth of ordered few atoms 1D and 2D structures. We demonstrate this concept of self-selective growth by Bi deposition and incorporation into the surfaces of GaAs NWs to form GaBi structures. Using low temperature scanning tunneling microscopy (STM), we observe the crystal structure dependent self-selective growth process, where ordered 1D GaBi atomic chains and 2D islands are alloyed into surfaces of the wurtzite (Wz) \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\{11{\bar{2}}0\}$$\end{document}{112¯0} crystal facets. The formation and lateral extension of these surface structures are controlled by the crystal structure and surface morphology uniquely found in NWs. This allows versatile high precision design of structures with predicted novel topological nature, by using the ability of NW heterostructure variations over orders of magnitude in dimensions with atomic-scale precision as well as controllably positioning in larger device structures.

Site-selected crystal material synthesis at the atomic scale has been a long-standing challenge. Here the authors use nanowire crystal phase heterostructures as templates for self-selective growth of one- and two-dimensional GaBi nanostructures, which allows versatile design with atomic-scale precision.

Polytypism in GaAs/GaNAs core-shell nanowires

We report the crystal structures of GaAs and GaAs/GaNAs/GaAs core-multishell nanowires (NWs). From statistical investigations by x-ray diffraction (XRD) and electron backscattered diffraction (EBSD) pattern analysis, we statistically and microscopically resolve the zinc-blende (ZB) and wurtzite (WZ) polytypism within the NWs. The XRD analysis shows a smaller fraction of WZ segments in the NWs with a larger concentration of nitrogen. With increasing nitrogen content in the GaNAs shell, the ZB peak position shifts toward higher angles and the WZ peak intensity decreases. The EBSD measurements also confirm the coexistence of ZB and WZ polytypes in all of the NWs. Their polytype switches along the length. Twin defects are observed in the ZB segments in all of the NWs. The unique grain map and grain size distribution show a decrease of the WZ segments in the GaAs/GaNAs/GaAs NW, in agreement with the XRD results. Microscopically, the local area where the polytype switches from WZ in the inner-core side to ZB toward the outer-shell surface is observed. Overall, we propose that the WZ polytype in the GaAs NWs decreases because of the strain induced by the growth of the GaNAs shell with a smaller lattice constant.

Checked patterned elemental distribution in AlGaAs nanowire branches via vapor-liquid-solid growth

Morphology, crystal defects and crystal phase can significantly affect the elemental distribution of ternary nanowires (NWs). Here, we report the synergic impact of the structure and crystal phase on the composition of branched self-catalyzed Al_xGa_1-xAs NWs. Branching events were confirmed to increase with Al incorporation rising, while twinning and polytypism were observed to extend from the trunk to the branches, confirming the epitaxial nature of the latter. The growth mechanism of these structures has been ascribed to Ga accumulation at the concave sites on the rough shell. This is in agreement with the ab initio calculations which reveal Ga atoms tend to segregate at the trunk/branch interface. Notably, uncommon, intricate compositional variations are exposed in these branched NWs, where Ga-rich stripes parallel to the growth direction of the branches intersect with another set of periodic arrangements of Ga-rich stripes which are perpendicular to them, leading to the realization of an elemental checked pattern. The periodic variations perpendicular to the growth direction of the branches are caused by the constant rotation of the sample during growth whilst Ga-rich stripes along the growth direction of the branches are understood to be driven by the different nucleation energies and polarities on facets of different crystal phase at the interface between the catalyst droplets and the branched NW tip. These results lead to further comprehension of phase segregation and could assist in the compositional engineering in ternary NWs via harnessing this interesting phenomenon.

Iuliacumite: A Novel Chemical Short-Range Order in a Two-Dimensional Wurtzite Single Monolayer InAs1-xSbx Shell on InAs Nanowires

A chemical short-range order is found in single monolayer InAs_1-xSb_x shells, which inherit a wurtzite structure from the underlying InAs nanowire, instead of crystallizing in the energetically preferred zincblende structure. The chemical order is characterized by an anticorrelation ordering vector in the ⟨112̅0⟩ direction and arises from strong Sb-Sb repulsive interactions along the atomic chains in the ⟨112̅0⟩ direction.

Composition modulation by twinning in InAsSb nanowires

We observe a composition modulated axial heterostructure in zincblende (ZB) InAs_0.90Sb_0.10 nanowires initiated by pseudo-periodic twin boundaries using scanning tunneling microscopy. The twin boundaries exhibit four planes with reduced Sb concentration due to a lower Sb incorporation during lateral overgrowth of a 4H wurtzite as compared to a ZB stacking sequence. We anticipate that this leads to compositional band offsets in addition to known structural band offsets present between 4H and ZB polytypes, changing the band alignment from type II to type I.

Importance of point defect reactions for the atomic-scale roughness of III-V nanowire sidewalls

The surface morphology of III-V semiconductor nanowires (NWs) protected by an arsenic cap and subsequently evaporated in ultrahigh vacuum is investigated with scanning tunneling microscopy and scanning transmission electron microscopy. We show that the changes of the surface morphology as a function of the NW composition and the nature of the seed particles are intimately related to the formation and reaction of surface point defects. Langmuir evaporation close to the congruent evaporation temperature causes the formation of vacancies which nucleate and form vacancy islands on {110} sidewalls of self-catalyzed InAs NWs. However, for annealing temperatures much smaller than the congruent temperature, a new phenomenon occurs: group III vacancies form and are filled by excess As atoms, leading to surface As_Ga antisites. The resulting Ga adatoms nucleate with excess As atoms at the NW edges, producing monoatomic-step islands on the {110} sidewalls of GaAs NWs. Finally, when gold atoms diffuse from the seed particle onto the {110} sidewalls during evaporation of the protective As cap, Langmuir evaporation does not take place, leaving the sidewalls of InAsSb NWs atomically flat.

Tuning adatom mobility and nanoscale segregation by twin formation and polytypism

Nanoscale variations in the composition of an Al _x Ga_1-x As shell around a GaAs nanowire affect the nanowire functionality and can lead to the formation of localized quantum emitters. These composition fluctuations can be the consequence of variations of crystal phase and/or nanoscale adatom mobility. By applying electron-microscopy-related techniques we correlate the optical, compositional and structural properties at the nanoscale on the same object. The results indicate a clear correlation between the twin density in the nanowire and the quantum-emitter density as well as a significant redshift in the emission. We propose that twinning increases nanoscale segregation effects in ternary alloys. An additional redshift in the emission can be explained by the staggered band alignment between wurtzite and zinc-blende phases. This work opens new avenues in the achievement of homogeneous ternary and quaternary alloys in nanowires and in the engineering of the segregation effects at the nanoscale.

Connecting Composition-Driven Faceting with Facet-Driven Composition Modulation in GaAs-AlGaAs Core-Shell Nanowires

Ternary III-V alloys of tunable bandgap are a foundation for engineering advanced optoelectronic devices based on quantum-confined structures including quantum wells, nanowires, and dots. In this context, core-shell nanowires provide useful geometric degrees of freedom in heterostructure design, but alloy segregation is frequently observed in epitaxial shells even in the absence of interface strain. High-resolution scanning transmission electron microscopy and laser-assisted atom probe tomography were used to investigate the driving forces of segregation in nonplanar GaAs-AlGaAs core-shell nanowires. Growth-temperature-dependent studies of Al-rich regions growing on radial {112} nanofacets suggest that facet-dependent bonding preferences drive the enrichment, rather than kinetically limited diffusion. Observations of the distinct interface faceting when pure AlAs is grown on GaAs confirm the preferential bonding of Al on {112} facets over {110} facets, explaining the decomposition behavior. Furthermore, three-dimensional composition profiles generated by atom probe tomography reveal the presence of Al-rich nanorings perpendicular to the growth direction; correlated electron microscopy shows that short zincblende insertions in a nanowire segment with predominantly wurtzite structure are enriched in Al, demonstrating that crystal phase engineering can be used to modulate composition. The findings suggest strategies to limit alloy decomposition and promote new geometries of quantum confined structures.