Balancing Near-Field Enhancement, Absorption, and Scattering for Effective Antenna-Reactor Plasmonic Photocatalysis

Plasmon-Induced Hot Electrons in Nanostructured Materials: Generation, Collection, and Application to Photochemistry

Plasmon refers to the coherent oscillation of all conduction-band electrons in a nanostructure made of a metal or a heavily doped semiconductor. Upon excitation, the plasmon can decay through different channels, including nonradiative Landau damping for the generation of plasmon-induced energetic carriers, the so-called hot electrons and holes. The energetic carriers can be collected by transferring to a functional material situated next to the plasmonic component in a hybrid configuration to facilitate a range of photochemical processes for energy or chemical conversion. This article centers on the recent advancement in generating and utilizing plasmon-induced hot electrons in a rich variety of hybrid nanostructures. After a brief introduction to the fundamentals of hot-electron generation and decay in plasmonic nanocrystals, we extensively discuss how to collect the hot electrons with various types of functional materials. With a focus on plasmonic nanocrystals made of metals, we also briefly examine those based upon heavily doped semiconductors. Finally, we illustrate how site-selected growth can be leveraged for the rational fabrication of different types of hybrid nanostructures, with an emphasis on the parameters that can be experimentally controlled to tailor the properties for various applications.

Plasmonic dielectric antennas for hybrid optical nanotweezing and optothermoelectric manipulation of single nanosized extracellular vesicles

This paper showcases an experimental demonstration of near-field optical trapping and dynamic manipulation of an individual extracellular vesicle. This is accomplished through the utilization of a plasmonic dielectric nanoantenna designed to support an optical anapole state-a non-radiating optical state resulting from the destructive interference between electric and toroidal dipoles in the far-field, leading to robust near-field enhancement. To further enhance the field intensity associated with the optical anapole state, a plasmonic mirror is incorporated, thereby boosting trapping capabilities. In addition to demonstrating near-field optical trapping, the study achieves dynamic manipulation of extracellular vesicles by harnessing the thermoelectric effect. This effect is induced in the presence of an ionic surfactant, cetyltrimethylammonium chloride (CTAC), combined with plasmonic heating. Furthermore, the thermoelectric effect improves trapping stability by introducing a wide and deep trapping potential. In summary, our hybrid plasmonic-dielectric trapping platform offers a versatile approach for actively transporting, stably trapping, and dynamically manipulating individual extracellular vesicles.

Fabrication of a PdCu@SiO2@Cu core-shell-satellite catalyst for the selective hydrogenation of acetylene

Pd25Cu75@SiO2 core-shell and PdCu@SiO2@Cu core-shell-satellite architectures were fabricated by silica-coating of Pd25Cu75 colloids in a reverse microemulsion. Hydrolysis of tetraethylorthosilicate in the reverse microemulsion containing hydrazine and ammonia yielded a core-shell structure, while the use of ammonia only, instead of a mixture of hydrazine and ammonia, formed a core-shell-satellite structure. The ammonia-leached copper species migrated onto the developing silica shell and formed smaller Cu clusters. Air-calcination at 673 K followed by H2-reduction at 773 K of the as-synthesized samples removed the organic surfactants and generated the permeable porous silica shells. The core-shell catalyst consisted of a metal core (8.5 nm) and a silica shell (7.8 nm), while the core-shell-satellite catalyst was composed by a metal core (7.0 nm), a silica shell (8.0 nm), and satellite Cu clusters (1.4 nm) on the silica shell. When used to catalyze the selective hydrogenation of acetylene to ethylene, the core-shell-satellite catalyst showed substantially enhanced activity and stability because of the synergetic catalysis between the metal core and the surrounding Cu clusters.

Photo-enhanced dehydrogenation of formic acid on Pd-based hybrid plasmonic nanostructures

Coupling visible light with Pd-based hybrid plasmonic nanostructures has effectively enhanced formic acid (FA) dehydrogenation at room temperature. Unlike conventional heating to achieve higher product yield, the plasmonic effect supplies a unique surface environment through the local electromagnetic field and hot charge carriers, avoiding unfavorable energy consumption and attenuated selectivity. In this minireview, we summarized the latest advances in plasmon-enhanced FA dehydrogenation, including geometry/size-dependent dehydrogenation activities, and further catalytic enhancement by coupling local surface plasmon resonance (LSPR) with Fermi level engineering or alloying effect. Furthermore, some representative cases were taken to interpret the mechanisms of hot charge carriers and the local electromagnetic field on molecular adsorption/activation. Finally, a summary of current limitations and future directions was outlined from the perspectives of mechanism and materials design for the field of plasmon-enhanced FA decomposition.

Uncovering the Mechanisms of Triplet-Triplet Annihilation Upconversion Enhancement via Plasmonic Nanocavity Tuning

The nonlinear conversion of photons from lower to higher energy is important for a wide range of applications, from quantum communications and optoelectronics to solar energy conversion and medicine. Triplet-triplet annihilation upconversion (TTA UC), which utilizes an absorber/emitter molecular pair, is a promising tool for upconversion applications requiring low intensity light such as photovoltaics, photocatalysis, and bioimaging. Despite demonstrations of efficient TTA UC in solution, practical applications have proven difficult, as thin films retard the necessary energy transfer steps and result in low emission yields. In this work, TTA UC emission from a thin film is greatly enhanced through integration into plasmonic nanogap cavities consisting of a silver mirror, a nanometer-scale polymer spacer containing a TTA molecular pair, and colloidally synthesized silver nanocubes. Mechanistic studies performed by varying the nanocube side length (45-150 nm) to tune the nanogap cavity resonance paired with simulations reveal absorption rate enhancement to be the primary operative mechanism in overall TTA UC emission enhancement. This absorption enhancement decreases the TTA UC threshold intensity by an order of magnitude and allows TTA UC emission to be excited with light up to 120 nm redder than the usable wavelength range for the control samples. Further, combined nanogap cavities composed of two distinct nanocube sizes result in surfaces which simultaneously enhance the absorption rate and emission rate. These dual-size nanogap cavities result in 45-fold TTA UC emission enhancement. In total, these studies present TTA UC emission enhancement, illustrate how the usable portion of the spectrum can be expanded for a given sensitizer-emitter pair, and develop both mechanistic understanding and design rules for TTA UC emission enhancement by plasmonic nanostructures.

New insights into the influence of plasmonic and non-plasmonic nanostructures on the photocatalytic activity of titanium dioxide

The results of this work cover the influence of plasmonic (gold) and non-plasmonic (palladium) nanostructures on the photocatalytic activity and redox properties of titanium dioxide. Materials decorated with gold, palladium and both materials were examined using photoelectrochemical and spectroelectrochemical methods to establish the changes introduced by the modifications and the possibility of the influence of the plasmonic effect from gold on their activity. Additionally, the photocatalytic tests of hydroxyl radical generation and hydrogen evolution were performed to confirm the activity of modified materials in oxidation and reduction reactions. It turned out that in the observed system the catalytic properties of palladium determine mostly the activity of modified materials, and the surface plasmon resonance of gold does not affect the activity. Moreover, the influence of the nanostructures on the activity, besides the catalytic performance, is the same for plasmonic and non-plasmonic ones and results in a change in the redox properties of the semiconductor.

Au@C/Pt core@shell/satellite supra-nanostructures: plasmonic antenna-reactor hybrid nanocatalysts

Integration of plasmonic nanoantennas with catalytically active reactors in deliberately designed hybrid supra-nanostructures creates a dual-functional materials platform, based upon which precise modulation of catalytic reaction kinetics becomes accomplishable through optical excitations of plasmon resonances. Here, we have developed a multistep synthetic approach that enables us to assemble colloidal Au@C/Pt core@shell/satellite supra-nanostructures, in which the Au core functions as a light-harvesting plasmonic nanoantenna, the Pt satellites act as catalytically active reactors, and the C shell serves as a nanoscale dielectric spacer separating the reactors from the antenna, respectively. By adjusting several synthetic parameters, the size of the Au core, the thickness of the C shell, and the surface coverage of Pt satellites can all be tuned independently. Choosing Pt-catalyzed cascade oxidation of 3,3',5,5'-tetramethylbenzidine in an aerobic aqueous environment as a model reaction, we have systematically studied the detailed kinetic features of the catalytic reactions both in the dark and under visible light illumination over a broad range of reaction conditions, which sheds light on the interplay between plasmonic and catalytic effects in these antenna-reactor nanohybrids. The plasmonic antenna effect can be effectively harnessed to kinetically modulate multiple crucial steps during the cascade reactions, benefiting from plasmon-enhanced interband electronic transitions in the Pt satellites and plasmon-enhanced intramolecular electronic excitations in chromogenic intermediate species. In addition to the plasmonic antenna effect, photothermal transduction derived from plasmonic excitations can also provide significant contributions to the kinetic enhancements under visible light illumination. The knowledge gained from this work serves as important guiding principles for rational design and structural optimization of plasmonic antenna-reactor hybrid nanomaterials, endowing us with enhanced capabilities to kinetically modulate targeted catalytic/photocatalytic molecule-transforming processes through light illumination.

Balancing Near-Field Enhancement and Hot Carrier Injection: Plasmonic Photocatalysis in Energy-Transfer Cascade Assemblies

Photocatalysis stands as a very promising alternative to photovoltaics in exploiting solar energy and storing it in chemical products through a single-step process. A central obstacle to its broad implementation is its low conversion efficiency, motivating research in different fields to bring about a breakthrough in this technology. Using plasmonic materials to photosensitize traditional semiconductor photocatalysts is a popular strategy whose full potential is yet to be fully exploited. In this work, we use CdS quantum dots as a bridge system, reaping energy from Au nanostructures and delivering it to TiO2 nanoparticles serving as catalytic centers. The quantum dots can do this by becoming an intermediate step in a charge-transfer cascade initiated in the plasmonic system or by creating an electron-hole pair at an improved rate due to their interaction with the enhanced near-field created by the plasmonic nanoparticles. Our results show a significant acceleration in the reaction upon combining these elements in hybrid colloidal photocatalysts that promote the role of the near-field enhancement effect, and we show how to engineer complexes exploiting this approach. In doing so, we also explore the complex interplay between the different mechanisms involved in the photocatalytic process, highlighting the importance of the Au nanoparticles' morphology in their photosensitizing capabilities.

Engineering the Metal/Dielectric Interface to Unlock the Potential of Scattered Light for Boosted Photoredox Catalysis

The recycling of scattered light by metals has been emerging as a promising light-manipulation-capture strategy, but how to bring its potential into better play remains to be explored. Herein, we present that constructing dual metal/high-refractive-index dielectric interfaces within the SiO2 core@TiO2 shell-Pd satellite@TiO2 shell effectively strengthens both the scattering efficiency of the dielectric SiO2 support and electric field confinement. Consequently, the absorption of Pd toward near-field scattered light and the interfacial charge carrier separation are both enhanced. The synergy of these effects leads to boosted photoactivity toward the aerobic oxidation of cyclohexanol to cyclohexanone and the anaerobic reduction of proton for hydrogen evolution under visible-light irradiation as compared to the counterparts with a single metal/dielectric interface and dual metal/dielectric interfaces consisting of low-refractive-index dielectric component. Notably, the similar enhancements in both optical absorption and photoactivity can be achieved through the present dual metal/high-refractive-index dielectric interfaces engineering strategy for other metals, such as Pt nanoparticles. This work presents an instructive avenue to upgrade the optical response of metals and thus the photocatalytic performance by engineering metal/dielectric interfaces.

Photocatalysis of Metallic Nanoparticles: Interband vs Intraband Induced Mechanisms

Photocatalysis induced by localized surface plasmon resonance of metallic nanoparticles has been studied for more than a decade, but photocatalysis originating from direct interband excitations is still under-explored. The spectral overlap and the coupling of these two optical regimes also complicate the determination of hot carriers' energy states and eventually hinder the accurate assignment of their catalytic role in studied reactions. In this Featured Article, after reviewing previous studies, we suggest classifying the photoexcitation via intra- and interband transitions where the physical states of hot carriers are well-defined. Intraband transitions are featured by creating hot electrons above the Fermi level and suitable for reductive catalytic pathways, whereas interband transitions are featured by generating hot d-band holes below the Fermi level and better for oxidative catalytic pathways. Since the contribution of intra- and interband transitions are different in the spectral regions of localized surface plasmon resonance and direct interband excitations, the wavelength dependence of the photocatalytic activities is very helpful in assigning which transitions and carriers contribute to the observed catalysis.

Promises of Plasmonic Antenna-Reactor Systems in Gas-Phase CO2 Photocatalysis

Sunlight-driven photocatalytic CO2 reduction provides intriguing opportunities for addressing the energy and environmental crises faced by humans. The rational combination of plasmonic antennas and active transition metal-based catalysts, known as "antenna-reactor" (AR) nanostructures, allows the simultaneous optimization of optical and catalytic performances of photocatalysts, and thus holds great promise for CO2 photocatalysis. Such design combines the favorable absorption, radiative, and photochemical properties of the plasmonic components with the great catalytic potentials and conductivities of the reactor components. In this review, recent developments of photocatalysts based on plasmonic AR systems for various gas-phase CO2 reduction reactions with emphasis on the electronic structure of plasmonic and catalytic metals, plasmon-driven catalytic pathways, and the role of AR complex in photocatalytic processes are summarized. Perspectives in terms of challenges and future research in this area are also highlighted.

Impact of bimetallic interface design on heat generation in plasmonic Au/Pd nanostructures studied by single-particle thermometry

Localized surface plasmons are lossy and generate heat. However, accurate measurement of the temperature of metallic nanoparticles under illumination remains an open challenge, creating difficulties in the interpretation of results across plasmonic applications. Particularly, there is a quest for understanding the role of temperature in plasmon-assisted catalysis. Bimetallic nanoparticles combining plasmonic with catalytic metals are raising increasing interest in artificial photosynthesis and the production of solar fuels. Here, we perform single-particle thermometry measurements to investigate the link between morphology and light-to-heat conversion of colloidal Au/Pd nanoparticles with two different configurations: core-shell and core-satellite. It is observed that the inclusion of Pd as a shell strongly reduces the photothermal response in comparison to the bare cores, while the inclusion of Pd as satellites keeps photothermal properties almost unaffected. These results contribute to a better understanding of energy conversion processes in plasmon-assisted catalysis.

High refractive index dielectric coating on plasmonic nanoantennas for strong visible light absorption in small transition metal nanoparticle reactors

A more practical model for plasmonic core@shell-satellite antenna-reactor photocatalysts is promoted. In contrast to the mainstream view, total light absorption in the Pt nanoparticle (NP) reactors can be further improved by 70% after coating a 10-nm-thick high refractive index TiO₂ shell on the large Ag antenna as a result of more Pt NPs undergoing high absorption enhancement. The enhancement effect is maximized at the electric quadrupole (EQ) resonance. Considering the high refractive index of the TiO₂ coating and the embedding of the Pt NPs, the underlying physics is addressed within classical electrodynamics, making a necessary supplement to the conventional plasmonic near-field enhancement mechanism. These findings provide a general strategy for developing novel, to the best of our knowledge, visible light photocatalysts made of transition metals directly.

Active Site Engineering on Plasmonic Nanostructures for Efficient Photocatalysis

Plasmonic nanostructures have shown immense potential in photocatalysis because of their distinct photochemical properties associated with tunable photoresponses and strong light-matter interactions. The introduction of highly active sites is essential to fully exploit the potential of plasmonic nanostructures in photocatalysis, considering the inferior intrinsic activities of typical plasmonic metals. This review focuses on active site-engineered plasmonic nanostructures with enhanced photocatalytic performance, wherein the active sites are classified into four types (i.e., metallic sites, defect sites, ligand-grafted sites, and interface sites). The synergy between active sites and plasmonic nanostructures in photocatalysis is discussed in detail after briefly introducing the material synthesis and characterization methods. Active sites can promote the coupling of solar energy harvested by plasmonic metal to catalytic reactions in the form of local electromagnetic fields, hot carriers, and photothermal heating. Moreover, efficient energy coupling potentially regulates the reaction pathway by facilitating the excited state formation of reactants, changing the status of active sites, and creating additional active sites using photoexcited plasmonic metals. Afterward, the application of active site-engineered plasmonic nanostructures in emerging photocatalytic reactions is summarized. Finally, a summary and perspective of the existing challenges and future opportunities are presented. This review aims to deliver some insights into plasmonic photocatalysis from the perspective of active sites, expediting the discovery of high-performance plasmonic photocatalysts.

Exploiting the LSPR effect for an enhanced photocatalytic hydrogen evolution reaction

Incorporation of plasmonic metals is one of the most widely adopted strategies for improving the photocatalytic hydrogen evolution reaction (HER) activity of semiconductor photocatalysts. This article summarizes recent advances in the development of plasmonic metal-semiconductor photocatalysts and four localized surface plasmon resonance (LSPR) driven mechanisms by which plasmonic metal nanoparticles can contribute to enhancement of HER activity. In addition, principles for maximizing the contribution of these LSPR driven mechanisms are highlighted to provide insights for future design of plasmonic metal-semiconductor photocatalysts with enhanced HER activity.

Research on photocatalytic CO2 conversion to renewable synthetic fuels based on localized surface plasmon resonance: current progress and future perspectives

Due to its desirable optoelectronic properties, localized surface plasmon resonance (LSPR) can hopefully play a promising role in photocatalytic CO2 reduction reaction (CO2RR). In this review, mechanisms and applications of LSPR effect in this field are introduced in detail.

Plasmonic Nanozymes: Leveraging Localized Surface Plasmon Resonance to Boost the Enzyme-Mimicking Activity of Nanomaterials

Nanozymes, a type of nanomaterials that function similarly to natural enzymes, receive extensive attention in biomedical fields. However, the widespread applications of nanozymes are greatly plagued by their unsatisfactory enzyme-mimicking activity. Localized surface plasmon resonance (LSPR), a nanoscale physical phenomenon described as the collective oscillation of surface free electrons in plasmonic nanoparticles under light irradiation, offers a robust universal paradigm to boost the catalytic performance of nanozymes. Plasmonic nanozymes (PNzymes) with elevated enzyme-mimicking activity by leveraging LSPR, emerge and provide unprecedented opportunities for biocatalysis. In this review, the physical mechanisms behind PNzymes are thoroughly revealed including near-field enhancement, hot carriers, and the photothermal effect. The rational design and applications of PNzymes in biosensing, cancer therapy, and bacterial infections elimination are systematically introduced. Current challenges and further perspectives of PNzymes are also summarized and discussed to stimulate their clinical translation. It is hoped that this review can attract more researchers to further advance the promising field of PNzymes and open up a new avenue for optimizing the enzyme-mimicking activity of nanozymes to create superior nanocatalysts for biomedical applications.

Burying small Pt nanoparticles in the TiO2 microsphere support to form visible light antenna-reactor photocatalysts

By rational design and parameter engineering of the TiO₂-Pt core-satellite construction, visible light absorption in small Pt nanoparticles (NPs) can be enhanced by nearly 100 times. The TiO₂ microsphere support works as the optical antenna, giving rise to superior performance compared to conventional plasmonic nanoantennas. A crucial step is to bury the Pt NPs completely in the high refractive index TiO₂ microsphere, because light absorption in the Pt NP approximately scales with the fourth power of the refractive index of its surrounding media. The proposed evaluation factor for light absorption enhancement in the Pt NPs at different positions is proved to be valid and useful. The physics modeling of the buried Pt NPs corresponds to the general case in practice where the surface of the TiO₂ microsphere is naturally rough or a thin TiO₂ coating is subsequently added. These results offer new avenues for directly transforming dielectric supported nonplasmonic catalytic transition metals into visible light photocatalysts.

Determining the role of Pd catalyst morphology and deposition criteria over large area plasmonic metasurfaces during light-enhanced electrochemical oxidation of formic acid

The use of metal composites based on plasmonic nanostructures partnered with catalytic counterparts has recently emerged as a promising approach in the field of plasmon-enhanced electrocatalysis. Here, we report on the role of the surface morphology, size, and anchored site of Pd catalysts coupled to plasmonic metasurfaces formed by periodic arrays of multimetallic Ni/Au nanopillars for formic acid electro-oxidation reaction (FAOR). We compare the activity of two kinds of metasurfaces differing in the positioning of the catalytic Pd nanoparticles. In the first case, the Pd nanoparticles have a polyhedron crystal morphology with exposed (200) facets and were deposited over the Ni/Au metasurfaces in a site-selective fashion by limiting their growth at the electromagnetic hot spots (Ni/Au-Pd@W). In contrast, the second case consists of spherical Pd nanoparticles grown in solution, which are homogeneously deposited onto the Ni/Au metasurface (Ni/Au-Pd@M). Ni/Au-Pd@W catalytic metasurfaces demonstrated higher light-enhanced FAOR activity (61%) in comparison to the Ni/Au-Pd@M sample (42%) for the direct dehydrogenation pathway. Moreover, the site-selective Pd deposition promotes the growth of nanoparticles favoring a more selective catalytic behavior and a lower degree of CO poisoning on Pd surface. The use of cyclic voltammetry, energy-resolved incident photon to current conversion efficiency, open circuit potential, and electrochemical impedance spectroscopy highlights the role of plasmonic near fields and hot holes in driving the catalytic enhancement under light conditions.

Plasmonic Hybrid Nanostructures in Photocatalysis: Structures, Mechanisms, and Applications

(Sun)Light is an abundantly available sustainable source of energy that has been used in catalyzing chemical reactions for several decades now. In particular, studies related to the interaction of light with plasmonic nanostructures have been receiving increased attention. These structures display the unique property of localized surface plasmon resonance, which converts light of a specific wavelength range into hot charge carriers, along with strong local electromagnetic fields, and/or heat, which may all enhance the reaction efficiency in their own way. These unique properties of plasmonic nanoparticles can be conveniently tuned by varying the metal type, size, shape, and dielectric environment, thus prompting a research focus on rationally designed plasmonic hybrid nanostructures. In this review, the term "hybrid" implies nanomaterials that consist of multiple plasmonic or non-plasmonic materials, forming complex configurations in the geometry and/or at the atomic level. We discuss the synthetic techniques and evolution of such hybrid plasmonic nanostructures giving rise to a wide variety of material and geometric configurations. Bimetallic alloys, which result in a new set of opto-physical parameters, are compared with core-shell configurations. For the latter, the use of metal, semiconductor, and polymer shells is reviewed. Also, more complex structures such as Janus and antenna reactor composites are discussed. This review further summarizes the studies exploiting plasmonic hybrids to elucidate the plasmonic-photocatalytic mechanism. Finally, we review the implementation of these plasmonic hybrids in different photocatalytic application domains such as H₂ generation, CO₂ reduction, water purification, air purification, and disinfection.

Excited States of Metal-Adsorbed Dimethyl Disulfide: A TDDFT Study with Cluster Model

The optical near field refers to a localized light field near a surface that can induce photochemical phenomena such as dipole-forbidden transitions. Recently, the photodissociation of the S–S bond of dimethyl disulfide (DMDS) was investigated using a scanning tunneling microscope with far- and near-field light. This reaction is thought to be initiated by the lowest-energy highest occupied molecular orbital (HOMO) to lowest unoccupied molecular orbital (LUMO) transition of the DMDS molecule under far-field light. In near-field light, photodissociation proceeds at lower photon energies than in far-field light. To gain insight into the underlying mechanism, we theoretically investigated the excited states of DMDS adsorbed on Cu and Ag surfaces modeled by a tetrahedral 20-atom cluster. The frontier orbitals of the molecule were delocalized by the interaction with the metal, resulting in narrowing of the HOMO–LUMO gap energy. The excited-state distribution was analyzed using the Mulliken population analysis, decomposing molecular orbitals into metal and DMDS fragments. The excited states of the intra-DMDS transitions were found over a wider energy range, but at low energies, their oscillator strengths were negligible, which is consistent with the experimental results. Sparse modeling analysis showed that typical electronic transitions differed between the higher and lower excited states. If these low-lying excited states are efficiently excited by near-field light with different selection rules, the S–S bond dissociation reaction can proceed.

Copper metal organic framework as natural oxidase mimic for effective killing of Gram-negative and Gram-positive bacteria

Nanozymes have been widely studied as substitutes for natural enzymes. However, the delicacy of their structures and their unclear catalytic sites make it difficult to maintain their structural robustness and catalytic durability. By mimicking active catalytic sites of natural enzymes and combining them with distinct channels of metal organic frameworks (MOFs), an active copper mimetic oxidase enzyme (Cu-MOF) was designed and synthesized with good structure and clear catalytic sites for improvement in catalytic activity. The Cu-MOFs showed excellent oxidase-like activity with a low K_m of 1.09 mM and exogenous ROS generation capacity. The Cu-MOFs exhibited antibacterial efficacy at a low concentration of 12.5 μg mL^-1 by an oxidative stress response. These Cu-MOFs with their simple design and effective oxidase mimicking show attractive application prospects in the field of antibacterial and enzyme catalysis.

Thermoplasmonics in Solar Energy Conversion: Materials, Nanostructured Designs, and Applications

The indispensable requirement for sustainable development of human society has forced almost all countries to seek highly efficient and cost-effective ways to harvest and convert solar energy. Though continuous progress has advanced, it remains a daunting challenge to achieve full-spectrum solar absorption and maximize the conversion efficiency of sunlight. Recently, thermoplasmonics has emerged as a promising solution, which involves several beneficial effects including enhanced light absorption and scattering, generation and relaxation of hot carriers, as well as localized/collective heating, offering tremendous opportunities for optimized energy conversion. Besides, all these functionalities can be tailored via elaborated designs of materials and nanostructures. Here, first the fundamental physics governing thermoplasmonics is presented and then the strategies for both material selection and nanostructured designs toward more efficient energy conversion are summarized. Based on this, recent progress in thermoplasmonic applications including solar evaporation, photothermal chemistry, and thermophotovoltaic is reviewed. Finally, the corresponding challenges and prospects are discussed.

Optical Properties of Colloidal Silver Nanowires

Silver nanowires are used in many applications, ranging from transparent conductive layers to Raman substrates and sensors. Their performance often relies on their unique optical properties that emerge from localized surface plasmon resonances in the ultraviolet. To tailor the nanowire geometry for a specific application, a correct understanding of the relationship between the wire's structure and its optical properties is therefore necessary. However, while the colloidal synthesis of silver nanowires typically leads to structures with pentagonally twinned geometries, their optical properties are often modeled assuming a cylindrical cross-section. Here we highlight the strengths and limitations of such an approximation by numerically calculating the optical and electrical response of pentagonally twinned silver nanowires and nanowire networks. We find that our accurate modeling is crucial to deduce structural information from experimentally measured extinction spectra of colloidally synthesized nanowire suspensions and to predict the performance of nanowire-based near-field sensors. On the contrary, the cylindrical approximation is fully capable of capturing the optical and electrical performance of nanowire networks used as transparent electrodes. Our results can help assess the quality of nanowire syntheses and guide in the design of optimized silver nanowire-based devices.

Thermo-photo catalysis: a whole greater than the sum of its parts

Thermo-photo catalysis, which is the catalysis with the participation of both thermal and photo energies, not only reduces the large energy consumption of thermal catalysis but also addresses the low efficiency of photocatalysis. As a whole greater than the sum of its parts, thermo-photo catalysis has been proven as an effective and promising technology to drive chemical reactions. In this review, we first clarify the definition (beyond photo-thermal catalysis and plasmonic catalysis), classification, and principles of thermo-photo catalysis and then reveal its superiority over individual thermal catalysis and photocatalysis. After elucidating the design principles and strategies toward highly efficient thermo-photo catalytic systems, an ample discussion on the synergetic effects of thermal and photo energies is provided from two perspectives, namely, the promotion of photocatalysis by thermal energy and the promotion of thermal catalysis by photo energy. Subsequently, state-of-the-art techniques applied to explore thermo-photo catalytic mechanisms are reviewed, followed by a summary on the broad applications of thermo-photo catalysis and its energy management toward industrialization. In the end, current challenges and potential research directions related to thermo-photo catalysis are outlined.

Dissociation of Single O2 Molecules on Ag(110) by Electrons, Holes, and Localized Surface Plasmons

A detailed understanding of the dissociation of O₂ molecules on metal surfaces induced by various excitation sources, electrons/holes, light, and localized surface plasmons, is crucial not only for controlling the reactivity of oxidation reactions but also for developing various oxidation catalysts. The necessity of mechanistic studies at the single-molecule level is increasingly important for understanding interfacial interactions between O₂ molecules and metal surfaces and to improve the reaction efficiency. We review single-molecule studies of O₂ dissociation on Ag(110) induced by various excitation sources using a scanning tunneling microscope (STM). The comprehensive studies based on the STM and density functional theory calculations provide fundamental insights into the excitation pathway for the dissociation reaction.

Hybrid Plasmonic Nanomaterials for Hydrogen Generation and Carbon Dioxide Reduction

The successful development of artificial photosynthesis requires finding new materials able to efficiently harvest sunlight and catalyze hydrogen generation and carbon dioxide reduction reactions. Plasmonic nanoparticles are promising candidates for these tasks, due to their ability to confine solar energy into molecular regions. Here, we review recent developments in hybrid plasmonic photocatalysis, including the combination of plasmonic nanomaterials with catalytic metals, semiconductors, perovskites, 2D materials, metal-organic frameworks, and electrochemical cells. We perform a quantitative comparison of the demonstrated activity and selectivity of these materials for solar fuel generation in the liquid phase. In this way, we critically assess the state-of-the-art of hybrid plasmonic photocatalysts for solar fuel production, allowing its benchmarking against other existing heterogeneous catalysts. Our analysis allows the identification of the best performing plasmonic systems, useful to design a new generation of plasmonic catalysts.

Plasmonic catalysis with designer nanoparticles

Catalysis is central to a more sustainable future and a circular economy. If the energy required to drive catalytic processes could be harvested directly from sunlight, the possibility of replacing contemporary processes based on terrestrial fuels by the conversion of light into chemical energy could become a step closer to reality. Plasmonic catalysis is currently at the forefront of photocatalysis, enabling one to overcome the limitations of "classical" wide bandgap semiconductors for solar-driven chemistry. Plasmonic catalysis enables the acceleration and control of a variety of molecular transformations due to the localized surface plasmon resonance (LSPR) excitation. Studies in this area have often focused on the fundamental understanding of plasmonic catalysis and the demonstration of plasmonic catalytic activities towards different reactions. In this feature article, we discuss recent contributions from our group in this field by employing plasmonic nanoparticles (NPs) with controllable features as model systems to gain insights into structure-performance relationships in plasmonic catalysis. We start by discussing the effect of size, shape, and composition in plasmonic NPs over their activities towards LSPR-mediated molecular transformations. Then, we focus on the effect of metal support interactions over activities, reaction selectivity, and reaction pathways. Next, we shift to the control over the structure in hollow NPs and nanorattles. Inspired by the findings from these model systems, we demonstrate a design-driven strategy for the development of plasmonic catalysts based on plasmonic-catalytic multicomponent NPs for two types of molecular transformations: the selective hydrogenation of phenylacetylene and the oxygen evolution reaction. Finally, future directions, challenges, and perspectives in the field of plasmonic catalysis with designer NPs are discussed. We believe that the examples and concepts presented herein may inspire work and progress in plasmonic catalysis encompassing the design of plasmonic multicomponent materials, new strategies to control reaction selectivity, and the unraveling of stability and reaction mechanisms.

Material strategies for function enhancement in plasmonic architectures

Plasmonic materials are promising for applications in enhanced sensing, energy, and advanced optical communications. These applications, however, often require chemical and physical functionality that is suited and designed for the specific application. In particular, plasmonic materials need to access the wide spectral range from the ultraviolet to the mid-infrared in addition to having the requisite surface characteristics, temperature dependence, or structural features that are not intrinsic to or easily accessed by the noble metals. Herein, we describe current progress and identify promising strategies for further expanding the capabilities of plasmonic materials both across the electromagnetic spectrum and in functional areas that can enable new technology and opportunities.

MoS2-based multiple surface plasmonic coupling for enhanced surface-enhanced Raman scattering and photoelectrocatalytic performance utilizing the size effect

MoS₂-based heterostructures have received increasing attention for not only surface-enhanced Raman scattering (SERS) but also for enhanced photoelectrocatalytic (PEC) performance. This study presents a hydrothermal method for preparing vertical MoS₂ nanosheets composed of in situ grown AuNPs with small size and chemically reduced AgNPs with large size to achieve the synergistic enhancement of SERS and PEC properties owing to the size effect of the plasmonic structure. Compared with pristine MoS₂ nanosheets and unitary AuNPs or AgNPs composited with MoS₂ nanosheets, the ternary heterostructure exhibited the strongest electromagnetic field and surface plasmon coupling, which was confirmed by finite-difference time-domain (FDTD) simulation and absorption spectra. In addition, the experimental results confirmed the outstanding SERS enhancement with an EF of 1.1×10⁹, and the most efficient hydrogen evolution reaction (HER) activity with a sensitive photocurrent response, attributing to the multiple surface plasmonic coupling effects of the Au-Ag bimetal and efficient charge-transfer process between MoS₂ and the bimetal. That is, it provides a robust method for developing multi-size bimetal-semiconductor complex nanocomposites for high-performance SERS sensors and PEC applications.

Plasmonic Coupling Architectures for Enhanced Photocatalysis

Plasmonic photocatalysis is a promising approach for solar energy transformation. Comparing with isolated metal nanoparticles, the plasmonic coupling architectures can provide further strengthened local electromagnetic field and boosted light-harvesting capability through optimal control over the composition, spacing, and orientation of individual nanocomponents. As such, when integrated with semiconductor photocatalysts, the coupled metal nanostructures can dramatically promote exciton generation and separation through plasmonic-coupling-driven charge/energy transfer toward superior photocatalytic efficiencies. Herein, the principles of the plasmonic coupling effect are presented and recent progress on the construction of plasmonic coupling architectures and their integration with semiconductors for enhanced photocatalytic reactions is summarized. In addition, the remaining challenges as to the rational design and utilization of plasmon coupling structures are elaborated, and some prospects to inspire new opportunities on the future development of plasmonic coupling structures for efficient and sustainable light-driven reactions are raised.

The impacts of metal-based engineered nanomaterial mixtures on microbial systems: A review

The last decade has witnessed tremendous growth in the commercial use of metal-based engineered nanomaterials (ENMs) for a wide range of products and processes. Consequently, direct and indirect release into environmental systems may no longer be considered negligible or insignificant. Yet, there is an active debate as to whether there are real risks to human or ecological health with environmental exposure to ENMs. Previous research has focused primarily on the acute effects of individual ENMs using pure cultures under controlled laboratory environments, which may not accurately reveal the ecological impacts of ENMs under real environmental conditions. The goal of this review is to assess our current understanding of ENM effects as we move from exposure of single to multiple ENMs or microbial species. For instance, are ENMs' impacts on microbial communities predicted by their intrinsic physical or chemical characteristics or their effects on single microbial populations; how do chronic ENM interactions compare to acute toxicity; does behavior under simplified laboratory conditions reflect that in environmental media; finally, is biological stress modified by interactions in ENM mixtures relative to that of individual ENM? This review summarizes key findings and our evolving understanding of the ecological effects of ENMs under complex environmental conditions on microbial systems, identifies the gaps in our current knowledge, and indicates the direction of future research.

Enhanced Sunlight-Driven Reactive Species Generation via Polarization Field in Nanopiezoelectric Heterostructures

Although it is established that the force-induced electric polarization field of piezoelectric semiconductors can be used to tune the transfer rate of photoexcited charge carriers, there is still a lack of successful strategies to effectively improve the photocatalytic reactivity and solar-to-chemical conversion efficiency (SCC) of piezoelectric materials. Here, we are the first to prepare and study a kind of catalyst based on nanopiezoelectric heterostructures of LiNbO₃-type ZnTiO₃·TiO₂ and tetragonal BaTiO₃ with Pt or FeO_x nanoparticle modification (i.e., ZBTO-Pt or ZBTO-FeO_x) for reactive species generation. With respect to the production of ^•OH and ^•O₂^- radicals, higher amounts were observed in piezophotocatalysis relative to those for individual piezo- and photocatalysis. Benefiting from the charge transfer resistance decreases by the deposition of Pt and FeO_x, the amounts of ^•OH radicals formed on ZBTO-Pt and ZBTO-FeO_x were approximately 48 and 21% higher than that on isolated ZBTO during piezophotocatalysis, and for the amounts of ^•O₂^- radicals the enhancements were approximately 11 and 6%, respectively. Furthermore, the concentrations of H₂O₂ formed on ZBTO-Pt and ZBTO-FeO_x under piezophotocatalysis reached approximately 315 and 206 μM after 100 min of reaction (and was still increasing) corresponding to 0.10 and 0.06% SCCs, respectively, which were also much higher than the concentrations and SCCs observed for piezo- and photocatalysis. The enhancements of piezophotocatalytic activities with these piezoelectric materials were related to the mechanical strain exerted on ZBTO, which generated a larger electric polarization field than those on ZnTiO₃·TiO₂ and BaTiO₃ as analyzed by a finite element method. This high-intensity electric polarization field accelerated the separation and transportation of photoexcited charge carriers in the highly sunlight responsive nanopiezoelectric heterostructures based on ZBTO-Pt and ZBTO-FeO_x.

Plasmonic Au Nanoparticle@Ti3C2Tx Heterostructures for Improved Oxygen Evolution Performance

As we know, in plasmonic-enhanced heterogeneous catalysis, the reaction rates could be remarkably accelerated by generating hot carriers in the constituent nanostructured metals. To further improve the reaction rate, well-defined heterostructures based on plasmonic gold nanoparticles on MXene Ti₃C₂T_x nanosheets (Au NPs@Ti₃C₂T_x) were rationally designed and systematically investigated to improve the performance of the oxygen evolution reaction (OER). The results demonstrated that the catalysis performance of the Au NPs@Ti₃C₂T_x system could be easily tuned by simply varying the concentration and size of Au NPs, and Au NPs@Ti₃C₂T_x with an average Au NP diameter (∼10 nm) exhibited a 2.5-fold increase in the oxidation or reduction current compared with pure Ti₃C₂T_x. The enhanced OER performance can be attributed to the synergistic effect of the plasmonic hot hole injection and Schottky junction carrier trapping. Owing to easy fabrication of Au NPs@Ti₃C₂T_x, the tunable size and concentration of Au NPs loaded on MXene nanosheets, and the significantly enhanced OER, it is expected that this work can lay the foundation to the design of multidimensional MXene-based heterostructures for highly efficient OER performance.

Manipulation of hot electron flow on plasmonic nanodiodes fabricated by nanosphere lithography

Energy conversion to generate hot electrons through the excitation of localized surface plasmon resonance (LSPR) in metallic nanostructures is an emerging strategy in photovoltaics and photocatalytic devices. Important factors for surface plasmon and hot electron generation are the size, shape, and materials of plasmonic metal nanostructures, which affect LSPR excitation, absorbance, and hot electron collection. Here, we fabricated the ordered structure of metal-semiconductor plasmonic nanodiodes using nanosphere lithography and reactive ion etching. Two types of hole-shaped plasmonic nanostructures with the hole diameter of 280 and 115 nm were fabricated on Au/TiO₂Schottky diodes. We show that hot electron flow can be manipulated by changing the size of plasmonic nanostructures on the Schottky diode. We show that the short-circuit photocurrent changes and the incident photon-to-electron conversion efficiency results exhibit the peak shift depending on the structures. These phenomena are explicitly observed with finite difference time domain simulations. The capability of tuning the morphology of plasmonic nanostructure on the Schottky diode can give rise to new possibilities in controlling hot electron generation and developing novel hot-electron-based energy conversion devices.

Plasmonic Au–Pd Bimetallic Nanocatalysts for Hot-Carrier-Enhanced Photocatalytic and Electrochemical Ethanol Oxidation

Gold–palladium (Au–Pd) bimetallic nanostructures with engineered plasmon-enhanced activity sustainably drive energy-intensive chemical reactions at low temperatures with solar simulated light. A series of alloy and core–shell Au–Pd nanoparticles (NPs) were prepared to synergistically couple plasmonic (Au) and catalytic (Pd) metals to tailor their optical and catalytic properties. Metal-based catalysts supporting a localized surface plasmon resonance (SPR) can enhance energy-intensive chemical reactions via augmented carrier generation/separation and photothermal conversion. Titania-supported Au–Pd bimetallic (i) alloys and (ii) core–shell NPs initiated the ethanol (EtOH) oxidation reaction under solar-simulated irradiation, with emphasis toward driving carbon–carbon (C–C) bond cleavage at low temperatures. Plasmon-assisted complete oxidation of EtOH to CO2, as well as intermediary acetaldehyde, was examined by monitoring the yield of gaseous products from suspended particle photocatalysis. Photocatalytic, electrochemical, and photoelectrochemical (PEC) results are correlated with Au–Pd composition and homogeneity to maintain SPR-induced charge separation and mitigate the carbon monoxide poisoning effects on Pd. Photogenerated holes drive the photo-oxidation of EtOH primarily on the Au-Pd bimetallic nanocatalysts and photothermal effects improve intermediate desorption from the catalyst surface, providing a method to selectively cleave C–C bonds.

Theoretical method for near-field Raman spectroscopy with multipolar Hamiltonian and real-time-TDDFT: Application to on- and off-resonance tip-enhanced Raman spectroscopy

Tip-enhanced Raman spectroscopy in combination with scanning tunneling microscopy could produce ultrahigh-resolution Raman spectra and images for single-molecule vibrations. Furthermore, a recent experimental study successfully decoupled the interaction between the molecule and the substrate/tip to investigate the intrinsic properties of molecules and their near-field interactions by Raman spectroscopy. In such a circumstance, more explicit treatments of the near field and molecular interactions beyond the dipole approximation would be desirable. Here, we propose a theoretical method based on the multipolar Hamiltonian that considers full spatial distribution of the electric field under the framework of real-time time-dependent density functional theory. This approach allows us to treat the on- and off-resonance Raman phenomena on the same footing. For demonstration, a model for the on- and off-resonance tip-enhanced Raman process in benzene was constructed. The obtained Raman spectra are well understood by considering both the spatial structure of the near field and the molecular vibration in the off-resonance condition. For the on-resonance condition, the Raman spectra are governed by the transition moment, in addition to the selection rule of off-resonance Raman. Interestingly, on-resonance Raman can be activated even when the near field forbids the π-π^* transition at equilibrium geometry due to vibronic couplings originating from structural distortions.

Challenges in Plasmonic Catalysis

The use of nanoplasmonics to control light and heat close to the thermodynamic limit enables exciting opportunities in the field of plasmonic catalysis. The decay of plasmonic excitations creates highly nonequilibrium distributions of hot carriers that can initiate or catalyze reactions through both thermal and nonthermal pathways. In this Perspective, we present the current understanding in the field of plasmonic catalysis, capturing vibrant debates in the literature, and discuss future avenues of exploration to overcome critical bottlenecks. Our Perspective spans first-principles theory and computation of correlated and far-from-equilibrium light-matter interactions, synthesis of new nanoplasmonic hybrids, and new steady-state and ultrafast spectroscopic probes of interactions in plasmonic catalysis, recognizing the key contributions of each discipline in realizing the promise of plasmonic catalysis. We conclude with our vision for fundamental and technological advances in the field of plasmon-driven chemical reactions in the coming years.

Near-field engineering for boosting the photoelectrochemical activity to a modal strong coupling structure

Near-field engineering is considered a significant strategy in constructing plasmonic nanostructures for efficient plasmonic chemistry. We demonstrate interfacial near-field engineering on a Au-NP/TiO₂/Au-film (ATA) photoanode to improve the water oxidation efficiency. To tailor the near-field distribution, postdeposited Au on an ATA electrode (Au@ATA) is implemented using a facile constant potential electrolysis technique. As a result, the average photocurrent conversion efficiency of Au@ATA is approximately 1.3-fold higher than that of ATA.

Surface chemistry of quantum-sized metal nanoparticles under light illumination

Size reduction of metal nanoparticles increases the exposure of metal surfaces significantly, favoring heterogeneous chemistry at the surface of the nanoparticles. The optical properties of metal nanoparticles, such as light absorption, also exhibit a strong dependence on their size. It is expected that there will be strong coupling of light absorption and surface chemistry when the metal nanoparticles are small enough. For instance, metal nanoparticles with sizes in the range of 2–10 nm exhibit both surface plasmon resonances, which can efficiently produce high-energy hot electrons near the surface of the nanoparticles under light illumination, and the Coulomb blockade effect, which favors electron transfer from the metal nanoparticles to the surface adsorbates. The synergy of efficient hot electron generation and electron transfer on the surface of small metal nanoparticles leads to double-faced effects: (i) surface (adsorption) chemistry influences optical absorption in the metal nanoparticles, and (ii) optical absorption in the metal nanoparticles promotes (or inhibits) surface adsorption and heterogeneous chemistry. This review article focuses on the discussion of typical quantum phenomena in metal nanoparticles of 2–10 nm in size, which are referred to as “quantum-sized metal nanoparticles”. Both theoretical and experimental examples and results are summarized to highlight the strong correlations between the optical absorption and surface chemistry for quantum-sized metal nanoparticles of various compositions. A comprehensive understanding of these correlations may shed light on achieving high-efficiency photocatalysis and photonics.

Size reduction of metal nanoparticles increases the exposure of metal surfaces significantly, favoring heterogeneous photochemistry at the surface of the nanoparticles.