Nanoscale Surface Curvature Effects on Ligand-Nanoparticle Interactions: A Plasmon-Enhanced Spectroscopic Study of Thiolated Ligand Adsorption, Desorption, and Exchange on Gold Nanoparticles

In Vitro and In-Silico Assessment of Gaussian Curvature-driven Internalization Kinetics of Nanoparticles

Nanoparticles have been of significant interest in various biomedical domains such as drug delivery, gene delivery, cytotoxicity analysis, and imaging. Despite the synthesis of a variety of nanoparticles, their cellular uptake efficiency remains a substantial obstacle, with only a small fraction of delivered nanoparticles (NPs) have been reported to traverse the cell membrane within 24 h. Consequently, higher doses are often necessitated, leading to increased toxicity concerns. In this investigation, we illustrate that nanoparticles having negative Gaussian curvature demonstrate rapid and efficient internalization into cells by lowering the energy barrier for membrane bending. Specifically, three types of gold nanoparticles; gold nanorods (GNR), gold nanodogbones at pH 4 (GDB4), and gold nanodogbones at pH 6 (GDB6) were synthesized, with Gaussian curvatures of 0, -166.91, and -376.62, respectively. Cellular uptake studies conducted via ICP-OES analysis reveal that GDB6 is taken up 140% more in A549 cells and 77% more in NIH3T3 cells compared to GNR. Confocal microscopy-based uptake studies further confirm the higher uptake of GDB6 compared to GNR. Additionally, molecular simulations indicate that GDB nanoparticles exhibit a significantly larger free energy change during translocation compared to GNR, emphasizing the impact of nanoparticle shape on uptake and translocation through the membrane and validating the efficacy of negative Gaussian curvature in enhancing cellular uptake, consistent with experimental observations. Overall, our findings emphasize the importance of nanoparticle curvature modulation in maximizing cellular uptake efficiency for improved biomedical applications, providing valuable insights into the design of nanomaterials for drug delivery purposes.

Controlled growth of silver on gold triangular nanoprisms: Improved surface enhanced Raman scattering for ultrasensitive detection of cancer biomarker

The precise design and synthesis of Au and Ag composite nanomaterials can provide them with richer plasmonic modes, resulting in enhanced optical properties. Here, a novel strategy was demonstrated to control the selective deposition of Ag at different positions of Au triangular nanoprisms (Au TNPs). 1,4-benzenedithiol (BDT) was selectively absorbed in different positions of Au TNPs which made Ag selectively deposited on Au TNPs. A series of Ag islands-Au TNPs including 3AgNPs islands-Au@Ag TNPs, 3AgNPs islands-Au TNPs, 2AgNPs islands-Au TNPs and 1AgNPs island-Au TNPs were obtained. We found that Surface enhanced Raman scattering (SERS) activity was closely associated with the position of Ag deposition under the same volume of AgNO3. It has strongest SERS activity when Ag deposit on the surface, edges and corners of Au TNPs which corresponding to 3AgNPs islands-Au@Ag TNPs with a high enhancement factor of 5.50 × 107. Raman reporter molecules were embedded between Au core, Ag shell and Ag islands which enhanced the stability, making them ideal candidates for Raman tag-based applications. We used it as SERS probes to realize the ultra-sensitive detection of Cyfra21-1, with a low limit of detection of 2.84 × 10-14 g/L and a wide linear range of 1.00 × 10-13-1.00 × 10-1 g/L.

Coupling plasmon and catalytic-active hotspots of Au@Pt core-satellite nanoparticles for in-situ spectroscopic observation of plasmon-promoted decarboxylation

Plasmon-induced hot carriers are a promising "active" energy source, attracting increasing attention for their potential applications in photocatalysis and photodetection. Here, we hybridize plasmonic Au spherical nanoparticles (SNPs) with catalytically active Pt nanocrystals to form Au@Pt core-satellite nanoparticles (CSNPs), which act as both an efficient catalyst for plasmon-promoted decarboxylation reaction and a robust surface-enhanced Raman scattering (SERS) substrate for plasmon-enhanced molecular spectroscopic detection. By regulating the coverage of Pt nanocrystals on the Au SNPs, we modulated the "hotspot" structures of the Au@Pt CSNPs to optimize the SERS detecting capability and catalytic decarboxylation performance. The coupling functionalities enable us with unique opportunities to in-situ SERS monitor universal reactions catalyzed by active catalysts (e.g. Pt, Pd) in the chemical industry in real-time. The decarboxylation rate of 4-mercaptophenylacetic acid was dynamically controlled by the surface catalytic decarboxylation step, following first-order overall reaction kinetics. Moreover, the reaction rate exhibited a strong correlation with the local field enhancement |E/E0|4 of the hotspot structure. This work provides spectroscopic insights into the molecule-plasmon interface under the plasmon-promoted catalytic reactions, guiding the rational design of the plasmonic interface of nanocatalysts to achieve desired functionalities.

Facile Synthesis and Characterization of Uniform Au Nanospheres Capped by Citrate for Biomedical Applications

We report a simple and versatile method for effectively replacing the toxic ligands, such as cetyltrimethylammonium bromide (CTAB) and cetyltrimethylammonium chloride (CTAC), on the surface of Au nanospheres with different sizes by citrate. The method involves the deposition of an ultrathin shell of fresh Au in the presence of sodium citrate at an adequate concentration. After the ligand exchange process, multiple techniques are used to confirm that the surface of the resultant Au nanospheres is covered by citrate while there is no sign of aggregation. We also demonstrate the mitigation of cell toxicity after exchanging the surface-bound CTAB/CTAC with citrate, opening the door to a range of biomedical applications.

Antitoxin nanoparticles: design considerations, functional mechanisms, and applications in toxin neutralization

The application of nanotechnology has significantly advanced the development of novel platforms that enhance disease treatment and diagnosis. A key innovation in this field is the creation of antitoxin nanoparticles (ATNs), designed to address toxin exposure. These precision-engineered nanosystems have unique physicochemical properties and selective binding capabilities, allowing them to effectively capture and neutralize toxins from various biological, chemical, and environmental sources. In this review, we thoroughly examine their therapeutic and diagnostic potential for managing toxin-related challenges. We also explore recent advancements and offer critical insights into the design and clinical implementation of ATNs.

Grating-Integrated Gold Nanograsses Encapsulated with ZIF-8: A Quantitative and Ultrasensitive Surface-Enhanced Raman Scattering Substrate

We proposed and demonstrated highly sensitive hybrid surface-enhanced Raman scattering (SERS) substrates, which are grating-integrated gold nanograsses (GIGN) that are tip-selectively encapsulated by ZIF-8 nanospheres (GIGN/tip-ZIF). This unique structure is realized through the tip-selective modification of GIGN by polyvinylpyrrolidone (PVP), and then, the tips of the GIGN were encapsulated by ZIF-8 nanospheres. The ZIF-8 nanospheres can adsorb analyte molecules, resulting in the spatial overlap between the analyte molecules and the "hotspots" on the tips of GIGN. Such a unique GIGN/tip-ZIF hybrid SERS substrate exhibits high sensitivity and quantitative detection ability. The detection limits can reach as low as 10-11 M, and the relative standard deviation is 5.59% for 4-aminothiophenol (4-ATP). In a wide range of concentrations from 10-5 to 10-11 M, the SERS intensity and concentration relationship can be fitted as a sigmoidal curve with R2 = 0.988. These indicate that the GIGN/tip-ZIF hybrid SERS substrates have broad applications in detecting toxic and harmful substances in food safety, disease diagnosis, and environmental monitoring.

A Mechanism Underpinning the Bioenergetic Metabolism-Regulating Function of Gold Nanocatalysts

Bioenergetic deficits are known to be significant contributors to neurodegenerative diseases. Nevertheless, identifying safe and effective means to address intracellular bioenergetic deficits remains a significant challenge. This work provides mechanistic insights into the energy metabolism-regulating function of colloidal Au nanocrystals, referred to as CNM-Au8, that are synthesized electrochemically in the absence of surface-capping organic ligands. When neurons are subjected to excitotoxic stressors or toxic peptides, treatment of neurons with CNM-Au8 results in dose-dependent neuronal survival and neurite network preservation across multiple neuronal subtypes. CNM-Au8 efficiently catalyzes the conversion of an energetic cofactor, nicotinamide adenine dinucleotide hydride (NADH), into its oxidized counterpart (NAD+ ), which promotes bioenergy production by regulating the intracellular level of adenosine triphosphate. Detailed kinetic measurements reveal that CNM-Au8-catalyzed NADH oxidation obeys Michaelis-Menten kinetics and exhibits pH-dependent kinetic profiles. Photoexcited charge carriers and photothermal effect, which result from optical excitations and decay of the plasmonic electron oscillations or the interband electronic transitions in CNM-Au8, are further harnessed as unique leverages to modulate reaction kinetics. As exemplified by this work, Au nanocrystals with deliberately tailored structures and surfactant-free clean surfaces hold great promise for developing next-generation therapeutic agents for neurodegenerative diseases.

Molecular-scale Insights into Cooperativity Switching of xTAB Adsorption on Gold Nanoparticles

Quantifying adsorption behaviors is crucial for various applications such as catalysis, separation, and sensing, yet it is generally challenging to access in solution. Here, we report a combined experimental and computational study of the adsorption behaviors of alkyl-trimethylammonium bromides (xTAB), a class of ligands important for colloidal nanoparticle stabilization and shape control, with various alkyl chain lengths x on Au nanoparticles. We use density functional theory (DFT) to calculate xTAB binding energies on Au{111} and Au{110} surfaces with standing-up and lying-down configurations, which provides insights into the adsorption affinity and cooperativity differences of xTAB on these two facets. We demonstrate the key role of van der Waals interactions in determining the xTAB adsorption behavior. These computational results predict and explain the experimental discovery of xTAB's adsorption behavior switch from stronger affinity, negative cooperativity to weaker affinity, positive cooperativity when the concentration of xTAB increases in solution. We also show that in the standing-up configuration, bilayer adsorption may occur on both facets, which can lead to different differential binding energies and consequently adsorption crossover between the two facets when the ligand concentration increases. Our combined experimental and computational approaches demonstrate a paradigm for gaining molecular-scale insights into adsorbate-surface interactions.

Shape-Induced Variations in Aromatic Thiols Adsorption on Gold Nanoparticle: A Novel Method for Accurate Evaluation of Adsorbed Molecules

Nonspherical gold nanoparticles (GNPs) are increasingly used to enhance sensitivity and selectivity in analytical methods such as surface-enhanced Raman spectroscopy (SERS) for detecting trace biomarkers. However, there is limited research on the adsorption properties of aromatic thiols onto gold nanoparticles of different morphologies, where surface curvature varies significantly at the molecular level. In this study, we investigated the adsorption kinetics of 4-mercaptobenzoic acid, an aromatic molecule, on GNPs with different shapes using SERS. Our findings revealed significant differences in the adsorption behavior and binding site preferences of aromatic thiols on GNPs with distinct morphologies. While thiol molecules consider any surface site on nanospheres equally appealing, nanostars exhibit variations in curvature and surface energy, leading to initial binding with further repositioning from the tips of the nanostar after plasmon activation. To address these differences, we proposed a universal method to evaluate the quantity of tightly bound adsorbed molecules on GNPs independently of the particle size, shape, or concentration.

Inferring the Interfacial Reactivity of Gold Nanoparticles by Surface Plasmon Resonance Measurements

Gold nanoparticles (GNPs) require a functionalization step in most cases to be suitable for applications. Optimizing this step in order to maintain both the stability and the plasmonic properties of the GNPs is a demanding process. Indeed, multiple analyses are required to get sufficient information on the grafting rate and the stability of the obtained suspension, leading to material and time waste. In this study, we propose to investigate ligand reactivity on a gold surface with surface plasmon resonance (SPR) measurements as a way to simulate the reactivity in GNP suspensions. We consider two thiolated ligands in this work: thioglycolic acid (TA) and 6-mercaptohexanoic acid (MHA). These thiols are grafted using different conditions on GNPs (monitored by optical absorption) and on a gold surface (monitored by SPR) and the grafting efficiency and stability are compared. The same conclusions are reached in both cases regarding the best protocol to implement, namely, the thiol molecules should be introduced in a water solution at a low concentration. This demonstrates the suitability of SPR to predict the reactivity on a GNP surface.

Assembling Biocompatible Polymers on Gold Nanoparticles: Toward a Rational Design of Particle Shape by Molecular Dynamics

Gold nanoparticles (AuNPs) have received great attention in a number of fields ranging from the energy sector to biomedical applications. As far as the latter is concerned, due to rapid renal clearance and a short lifetime in blood, AuNPs are often encapsulated in a poly(lactic-co-glycolic acid) (PLGA) matrix owing to its biocompatibility and biodegradability. A better understanding of the PLGA polymers on the AuNP surface is crucial to improve and optimize the above encapsulation process. In this study, we combine a number of computational approaches to explore the adsorption mechanisms of PLGA oligomers on a Au crystalline NP and to rationalize the PLGA coating process toward a more efficient design of the NP shape. Atomistic simulations supported by a recently developed unsupervised machine learning scheme show the temporal evolution and behavior of PLGA clusterization by tuning the oligomer concentration in aqueous solutions. Then, a detailed surface coverage analysis coupled with free energy landscape calculations sheds light on the anisotropic nature of PLGA adsorption onto the AuNP. Our results prove that the NP shape and topology may address and privilege specific sites of adsorption, such as the Au {1 1 1} crystal planes in selected NP samples. The modeling-based investigation suggested in this article offers a solid platform to guide the design of coated NPs.

Synthesis and multi-scale properties of PuO2 nanoparticles: recent advances and open questions

Due to the increased attention given to actinide nanomaterials, the question of their structure-property relationship is on the spotlight of recent publications. Plutonium oxide (PuO₂) particularly plays a central role in nuclear energetics and a comprehensive knowledge about its properties when nanosizing is of paramount interest to understand its behaviour in environmental migration schemes but also for the development of advanced nuclear energy systems underway. The element plutonium further stimulates the curiosity of scientists due to the unique physical and chemical properties it exhibits around the periodic table. PuO₂ crystallizes in the fluorite structure of the face-centered cubic system for which the properties can be significantly affected when shrinking. Identifying the formation mechanism of PuO₂ nanoparticles, their related atomic, electronic and crystalline structures, and their reactivity in addition to their nanoscale properties, appears to be a fascinating and challenging ongoing topic, whose recent advances are discussed in this review.

Coalescence of Au-Pd Nanoropes and their Application as Enhanced Electrocatalysts for the Oxygen Reduction Reaction

Lattice distortions and defects can lead to a strain effect that greatly affects the electronic structure of the noble metal surface and the chemical adsorption of ligands on the surfaces. Introducing defects is an efficient strategy to improve the activity of noble metal catalysts. Herein, a fusion approach is developed to fine-tune the defects and lattice strain in Au-Pd nanowires. Specifically, braided strands in Au-Pd nanoropes gradually coalesce to form solid nanowires upon H₂ O₂ treatment and heating, leading to a series of Au-Pd nanowires with various amounts of defects. Owing to the 1D morphology, as well as the optimized lattice strain and surface electronic structure, the intermediate Au-Pd nanowire obtained after 60 min heating (denoted as Au-Pd NW₆₀ ) exhibits excellent catalytic activity and stability toward the oxygen reduction reaction, with the half-wave potential at 0.918 V, 45 mV higher than that of the commercial Pt/C; and specific activity reaches up to 1.7 mA cm^-2 , 7.3 times higher than that of the Pt/C.

Curvature-Selective Nanocrystal Surface Ligation Using Sterically-Encumbered Metal-Coordinating Ligands

Organic ligands are critical in determining the physiochemical properties of inorganic nanocrystals. However, precise nanocrystal surface modification is extremely difficult to achieve. Most research focuses on finding ligands that fully passivate the nanocrystal surface, with an emphasis on the supramolecular structure generated by the ligand shell. Inspired by molecular metal-coordination complexes, we devised an approach based on ligand anchoring groups that are flanked by encumbering organic substituents and are chemoselective for binding to nanocrystal corner, edge, and facet sites. Through experiment and theory, we affirmed that the surface-ligand steric pressures generated by these organic substituents are significant enough to impede binding to regions of low nanocurvature, such as nanocrystal facets, and to promote binding to regions of high curvature such as nanocrystal edges.

β-Glucan-Functionalized Nanoparticles Down-Modulate the Proinflammatory Response of Mononuclear Phagocytes Challenged with Candida albicans

Systemic fungal infections are associated with significant morbidity and mortality, and Candida albicans is the most common causative agent. Recognition of yeast cells by immune cell surface receptors can trigger phagocytosis of fungal pathogens and a pro-inflammatory response that may contribute to fungal elimination. Nevertheless, the elicited inflammatory response may be deleterious to the host by causing excessive tissue damage. We developed a nanoparticle-based approach to modulate the host deleterious inflammatory consequences of fungal infection by using β1,3-glucan-functionalized polystyrene (β-Glc-PS) nanoparticles. β-Glc-PS nanoparticles decreased the levels of the proinflammatory cytokines TNF-α, IL-6, IL-1β and IL-12p40 detected in in vitro culture supernatants of bone marrow-derived dendritic cells and macrophage challenged with C. albicans cells. Moreover, β-Glc-PS nanoparticles impaired the production of reactive oxygen species by bone marrow-derived dendritic cells incubated with C. albicans. This immunomodulatory effect was dependent on the nanoparticle size. Overall, β-Glc-PS nanoparticles reduced the proinflammatory response elicited by fungal cells in mononuclear phagocytes, setting the basis for a targeted therapy aimed at protecting the host by lowering the inflammatory cost of infection.

Solution NMR methods for structural and thermodynamic investigation of nanoparticle adsorption equilibria

Characterization of dynamic processes occurring at the nanoparticle (NP) surface is crucial for developing new and more efficient NP catalysts and materials. Thus, a vast amount of research has been dedicated to developing techniques to characterize sorption equilibria. Over recent years, solution NMR spectroscopy has emerged as a preferred tool for investigating ligand-NP interactions. Indeed, due to its ability to probe exchange dynamics over a wide range of timescales with atomic resolution, solution NMR can provide structural, kinetic, and thermodynamic information on sorption equilibria involving multiple adsorbed species and intermediate states. In this contribution, we review solution NMR methods for characterizing ligand-NP interactions, and provide examples of practical applications using these methods as standalone techniques. In addition, we illustrate how the integrated analysis of several NMR datasets was employed to elucidate the role played by support-substrate interactions in mediating the phenol hydrogenation reaction catalyzed by ceria-supported Pd nanoparticles.

Interactions of proteins with metal-based nanoparticles from a point of view of analytical chemistry - Challenges and opportunities

Interactions of proteins with nanomaterials draw attention of many research groups interested in fundamental phenomena. However, alongside with valuable information regarding physicochemical aspects of such processes and their mechanisms, they more and more often prove to be useful from a point of view of bioanalytics. Deliberate use of processes based on adsorption of proteins on nanoparticles (or vice versa) allows for a development of new analytical methods and improvement of the existing ones. It also leads to obtaining of nanoparticles of desired properties and functionalities, which can be used as elements of analytical tools for various applications. Due to interactions with nanoparticles, proteins can also gain new functionalities or lose their interfering potential, which from perspective of bioanalytics seems to be very inviting and attractive. In the framework of this article we will discuss the bioanalytical potential of interactions of proteins with a chosen group of nanoparticles, and implementation of so driven processes for biosensing. Moreover, we will show both positive and negative (opportunities and challenges) aspects resulting from the presence of proteins in media/samples containing metal-based nanoparticles or their precursors.

Spatiotemporal-Resolved Hyperspectral Raman Imaging of Plasmon-Assisted Reactions at Single Hotspots

Raman spectroscopy facilitates the study of reacting molecules on single nanomaterials. In recent years, the temporal resolution of Raman spectral measurement has been remarkably reduced to the millisecond level. However, the classic scan-based imaging mode limits the application in the dynamical study of reactions at multiple nanostructures. In this paper, we propose a spatiotemporal-resolved Raman spectroscopy (STRS) technology to achieve fast (∼40 ms) and high spatial resolution (∼300 nm) hyperspectral Raman imaging of single nanostructures. With benefits of the outstanding electromagnetic field enhancement factor by surface plasmon resonance (∼10¹²) and the snapshot hyperspectral imaging strategy, we demonstrate the observation of stepwise Raman signals from single-particle plasmon-assisted reactions. Results reveal that the reaction kinetics is strongly affected by not only the surface plasmon-polariton generation but also the density of Raman molecules. In consideration of the spatiotemporal resolving capability of STRS, we anticipate that it provides a potential platform for further extending the application of Raman spectroscopy methods in the dynamic study of 1D or 2D nanostructures.

Tunable Orientation and Assembly of Polymer-Grafted Nanocubes at Fluid-Fluid Interfaces

Self-assembly of faceted nanoparticles is a promising route for fabricating nanomaterials; however, achieving low-dimensional assemblies of particles with tunable orientations is challenging. Here, we demonstrate that trapping surface-functionalized faceted nanoparticles at fluid-fluid interfaces is a viable approach for controlling particle orientation and facilitating their assembly into unique one- and two-dimensional superstructures. Using molecular dynamics simulations of polymer-grafted nanocubes in a polymer bilayer along with a particle-orientation classification method we developed, we show that the nanocubes can be induced into face-up, edge-up, or vertex-up orientations by tuning the graft density and differences in their miscibility with the two polymer layers. The orientational preference of the nanocubes is found to be governed by an interplay between the interfacial area occluded by the particle, the difference in interactions of the grafts with the two layers, and the stretching and intercalation of grafts at the interface. The resulting orientationally constrained nanocubes are then shown to assemble into a variety of unusual architectures, such as rectilinear strings, close-packed sheets, bilayer ribbons, and perforated sheets, which are difficult to obtain using other assembly methods. Our work thus demonstrates a versatile strategy for assembling freestanding arrays of faceted nanoparticles with possible applications in plasmonics, optics, catalysis, and membranes, where precise control over particle orientation and position is required.

Gold nanostructures: synthesis, properties, and neurological applications

Recent advances in technology are expected to increase our current understanding of neuroscience. Nanotechnology and nanomaterials can alter and control neural functionality in both in vitro and in vivo experimental setups. The intersection between neuroscience and nanoscience may generate long-term neural interfaces adapted at the molecular level. Owing to their intrinsic physicochemical characteristics, gold nanostructures (GNSs) have received much attention in neuroscience, especially for combined diagnostic and therapeutic (theragnostic) purposes. GNSs have been successfully employed to stimulate and monitor neurophysiological signals. Hence, GNSs could provide a promising solution for the regeneration and recovery of neural tissue, novel neuroprotective strategies, and integrated implantable materials. This review covers the broad range of neurological applications of GNS-based materials to improve clinical diagnosis and therapy. Sub-topics include neurotoxicity, targeted delivery of therapeutics to the central nervous system (CNS), neurochemical sensing, neuromodulation, neuroimaging, neurotherapy, tissue engineering, and neural regeneration. It focuses on core concepts of GNSs in neurology, to circumvent the limitations and significant obstacles of innovative approaches in neurobiology and neurochemistry, including theragnostics. We will discuss recent advances in the use of GNSs to overcome current bottlenecks and tackle technical and conceptual challenges.

2D-Oriented Attachment of 1D Colloidal Semiconductor Nanocrystals via an Etchant

The oriented attachment (OA) of 0D semiconductor nanocrystals into 1D and 2D nanostructures with unique properties is useful for the fabrication of quantum confined nanomaterials that are otherwise difficult to produce by direct synthesis. Given that the OA of 1D nanocrystals such as nanorods generally produces linear chains, rod-couple structures, or clustered columns, linking them in a facet-specific manner to produce 2D structures is challenging. Here, we report that 1D Cu_2-xS nanorods undergo etching on exposure to hexylphosphonic acid under mild heating, which results in an increased curvature and a reduction in surface ligands at those sites. This causes the nanorods to fuse via their basal tip facets into chains and then cojoin through diametrically opposed side facets, resulting in atomically coupled, 2D raftlike structures. The stepwise OA of 1D nanocrystals into 2D nanostructures illustrated here expands the range of nanoarchitectures that can be produced via solution-processed methods.

Polystyrene Nanoplastics Inhibit the Transformation of Tetrabromobisphenol A by the Bacterium Rhodococcus jostii

Microplastics (MPs) and nanoplastics (NPs) in the environment pose significant risks to organisms of different trophic levels. While the toxicity of MPs and NPs have been extensively investigated, it remains unknown whether these particles affect microbial transformation of organic pollutants. Here, we show that 20 and 100 nm polystyrene NPs (PS-NPs) can inhibit the transformation of tetrabromobisphenol A (TBBPA) by Gram-positive bacterium Rhodococcus jostii in a concentration-dependent manner. We found that smaller PS-NPs were more inhibitory than larger ones and that both PS-NPs affected biotransformation in several ways. PS-NPs adsorbed TBBPA on their surface and reduced the bioavailable concentration of TBBPA for transformation by R. jostii. Furthermore, PS-NPs induced oxidative stress, increased membrane permeability, and downregulated O-methyltransferase enzymes that transform TBBPA into their methylated derivatives. Our results demonstrate that PS-NPs can impact microbial transformation of organic pollutants, and these effects should be accounted for in future environmental risk assessments.

How to Use Localized Surface Plasmon for Monitoring the Adsorption of Thiol Molecules on Gold Nanoparticles?

The functionalization of spherical gold nanoparticles (AuNPs) in solution with thiol molecules is essential for further developing their applications. AuNPs exhibit a clear localized surface plasmon resonance (LSPR) at 520 nm in water for 20 nm size nanoparticles, which is extremely sensitive to the local surface chemistry. In this study, we revisit the use of UV-visible spectroscopy for monitoring the LSPR peak and investigate the progressive reaction of thiol molecules on 22 nm gold nanoparticles. FTIR spectroscopy and TEM are used for confirming the nature of ligands and the nanoparticle diameter. Two thiols are studied: 11-mercaptoundecanoic acid (MUDA) and 16-mercaptohexadecanoic acid (MHDA). Surface saturation is detected after adding 20 nmol of thiols into 1.3 × 10⁻³ nmol of AuNPs, corresponding approximately to 15,000 molecules per AuNPs (which is equivalent to 10.0 molecules per nm²). Saturation corresponds to an LSPR shift of 2.7 nm and 3.9 nm for MUDA and MHDA, respectively. This LSPR shift is analyzed with an easy-to-use analytical model that accurately predicts the wavelength shift. The case of dodecanehtiol (DDT) where the LSPR shift is 15.6 nm is also quickly commented. An insight into the kinetics of the functionalization is obtained by monitoring the reaction for a low thiol concentration, and the reaction appears to be completed in less than one hour.

FTIR study of the surface-ligand exchange reaction with glutathione on biocompatible rod-shaped CdSe/CdS semiconductor nanocrystals

Semiconductor nanocrystals (SNCs) are an essential optical tool in the life sciences. Application of SNCs to living systems requires that their surfaces be covered with biocompatible molecules. The surface capping...

Applied surface enhanced Raman Spectroscopy in plant hormones detection, annexation of advanced technologies: A review

Plant hormones are the molecules that control the vigorous development of plants and help to cope with the stress conditions efficiently due to vital and mechanized physiochemical regulations. Biologists and analytical chemists, both endorsed the extreme problems to quantify plant hormones due to their low level existence in plants and the technological support is devastatingly required to established reliable and efficient detection methods of plant hormones. Surface Enhanced Raman Spectroscopy (SERS) technology is becoming vigorously favored and can be used to accurately and specifically identify biological and chemical molecules. Subsistence molecular properties with varying excitation wavelength require the pertinent substrate to detect SERS signals from plant hormones. Three typical mechanisms of Raman signal enhancement have been discovered, electromagnetic, chemical and Tip-enhanced Raman spectroscopy (TERS). Though, complex detection samples hinder in consistent and reproducible results of SERS-based technology. However, different algorithmic models applied on preprocessed data enhanced the prediction performances of Raman spectra by many folds and decreased the fluorescence value. By incorporating SERS measurements into the microfluidic platform, further highly repeatable SERS results can be obtained. This review paper tends to study the fundamental working principles, methods, applications of SERS systems and their execution in experiments of rapid determination of plant hormones as well as several ways of integrated SERS substrates. The challenges to develop an SERS-microfluidic framework with reproducible and accurate results for plant hormone detection are discussed comprehensively and highlighted the key areas for future investigation briefly.

Importance of Surface Topography in Both Biological Activity and Catalysis of Nanomaterials: Can Catalysis by Design Guide Safe by Design?

It is acknowledged that the physicochemical properties of nanomaterials (NMs) have an impact on their toxicity and, eventually, their pathogenicity. These properties may include the NMs’ surface chemical composition, size, shape, surface charge, surface area, and surface coating with ligands (which can carry different functional groups as well as proteins). Nanotopography, defined as the specific surface features at the nanoscopic scale, is not widely acknowledged as an important physicochemical property. It is known that the size and shape of NMs determine their nanotopography which, in turn, determines their surface area and their active sites. Nanotopography may also influence the extent of dissolution of NMs and their ability to adsorb atoms and molecules such as proteins. Consequently, the surface atoms (due to their nanotopography) can influence the orientation of proteins as well as their denaturation. However, although it is of great importance, the role of surface topography (nanotopography) in nanotoxicity is not much considered. Many of the issues that relate to nanotopography have much in common with the fundamental principles underlying classic catalysis. Although these were developed over many decades, there have been recent important and remarkable improvements in the development and study of catalysts. These have been brought about by new techniques that have allowed for study at the nanoscopic scale. Furthermore, the issue of quantum confinement by nanosized particles is now seen as an important issue in studying nanoparticles (NPs). In catalysis, the manipulation of a surface to create active surface sites that enhance interactions with external molecules and atoms has much in common with the interaction of NP surfaces with proteins, viruses, and bacteria with the same active surface sites of NMs. By reviewing the role that surface nanotopography plays in defining many of the NMs’ surface properties, it reveals the need for its consideration as an important physicochemical property in descriptive and predictive toxicology. Through the manipulation of surface topography, and by using principles developed in catalysis, it may also be possible to make safe-by-design NMs with a reduction of the surface properties which contribute to their toxicity.

Nanoscale cooperative adsorption for materials control

Adsorption plays vital roles in many processes including catalysis, sensing, and nanomaterials design. However, quantifying molecular adsorption, especially at the nanoscale, is challenging, hindering the exploration of its utilization on nanomaterials that possess heterogeneity across different length scales. Here we map the adsorption of nonfluorescent small molecule/ion and polymer ligands on gold nanoparticles of various morphologies in situ under ambient solution conditions, in which these ligands are critical for the particles’ physiochemical properties. We differentiate at nanometer resolution their adsorption affinities among different sites on the same nanoparticle and uncover positive/negative adsorption cooperativity, both essential for understanding adsorbate-surface interactions. Considering the surface density of adsorbed ligands, we further discover crossover behaviors of ligand adsorption between different particle facets, leading to a strategy and its implementation in facet-controlled synthesis of colloidal metal nanoparticles by merely tuning the concentration of a single ligand.

Adsorption is a fundamentally important process but challenging to quantify, especially at the nanoscale. Here, the authors map the adsorption affinity and cooperativity of various ligands on single gold nanoparticles and discover adsorption crossover behaviors between different facets, leading to a strategy to control particle shape.

Interaction of Differently Sized, Shaped, and Functionalized Silver and Gold Nanoparticles with Glycosylated versus Nonglycosylated Transferrin

Exposure of nanomaterials (NMs) to biological medium results in their direct interaction with biomolecules and the formation of a dynamic biomolecular layer known as the biomolecular corona. Despite numerous published data on nano-biointeractions, the role of protein glycosylation in the formation, characteristics, and fate of such nano-biocomplexes has been almost completely neglected, although most serum proteins are glycosylated. This study aimed to systematically investigate the differences in interaction of metallic NPs with glycosylated vs nonglycosylated transferrin. To reach this aim, we compared interaction mechanisms between differently sized, shaped, and surface-functionalized silver NMs and gold NMs to commercially available human transferrin (TRF), a glycosylated protein, and to its nonglycosylated recombinant form (ngTRF). Bovine serum albumin (BSA) was also included in the study for comparative purposes. Characterization of NMs was performed using transmission electron microscopy and dynamic and electrophoretic light scattering techniques. Fluorescence quenching and circular dichroism methods were used to evaluate protein binding constants on the nanosurface and conformational changes after the protein-NM interactions, respectively. Competitive binding of TRF, ngTRF, and BSA to the surface of different NMs was evaluated by separating them after extraction from protein corona by gel electrophoresis following quantification with a commercial protein assay. The results showed that the binding strength between NMs and transferrin and the changes in the secondary protein structure largely depend not only on NM physicochemical properties but also on the protein glycosylation status. Data gained by this study highlight the relevance of protein glycosylation for all future design, development, and efficacy and safety assessment of NMs.

Targeting the "Sweet Side" of Tumor with Glycan-Binding Molecules Conjugated-Nanoparticles: Implications in Cancer Therapy and Diagnosis

Nanotechnology is in the spotlight of therapeutic innovation, with numerous advantages for tumor visualization and eradication. The end goal of the therapeutic use of nanoparticles, however, remains distant due to the limitations of nanoparticles to target cancer tissue. The functionalization of nanosystem surfaces with biological ligands is a major strategy for directing the actions of nanomaterials specifically to tumor cells. Cancer formation and metastasis are accompanied by profound alterations in protein glycosylation. Hence, the detection and targeting of aberrant glycans are of great value in cancer diagnosis and therapy. In this review, we provide a brief update on recent progress targeting aberrant glycosylation by functionalizing nanoparticles with glycan-binding molecules (with a special focus on lectins and anti-glycan antibodies) to improve the efficacy of nanoparticles in cancer targeting, diagnosis, and therapy and outline the challenges and limitations in implementing this approach. We envision that the combination of nanotechnological strategies and cancer-associated glycan targeting could remodel the field of cancer diagnosis and therapy, including immunotherapy.

Interaction of silver nanoparticles with plasma transport proteins: A systematic study on impacts of particle size, shape and surface functionalization

Metallic nanoparticles are an important and widely used materials in development of nano-enabled medicine. For that reason, their interaction with biological molecules has to be systematically examined, as use of nanoparticles can lead to altered biological functions. In this study, we evaluated the interaction between silver nanoparticles (AgNPs) and two important plasma transport proteins - albumin and α-1-acid glycoprotein. To investigate comprehensively how different physico-chemical properties impact interaction of proteins with nanosurface, AgNPs of different size, shape and surface coating was prepared. The study was conducted using UV-Vis absorption, fluorescence, inductively coupled plasma mass spectrometry, circular dichroism spectroscopy, transmission electron microscopy, dynamic and electrophoretic light scattering techniques. The results showed significant complexities of the nano-bio interface and binding affinities of proteins onto surface of different AgNPs, which were affected by both AgNPs and protein properties. The most significant role on AgNPs-protein interaction had the coating agents used for AgNPs surface stabilization. Our findings should improve safe-by-design approach to development of the metallic nanomaterials for medical use.

Molecular Origin of Electrical Conductivity in Gold-Polythiophene Hybrid Particle Films

Hybrid electronic materials combine inorganic metals and semiconductors with π-conjugated polymers. The orientation of the polymer molecules in relation to the inorganic components is crucial for electrical material properties and device performance, but little is known of the configuration of π-conjugated polymers that bind to inorganic surfaces. Highly curved surfaces are common when using nanoscale components, for example, metal nanocrystal cores covered with conductive polymers. It is important to understand their effect on molecular arrangement. Here, we compare the molecular structures and electrical conductivities of well-defined nanoscale gold spheres and rods with shells of the covalently bound polythiophene PTEBS (poly[2-(3-thienyl)-ethyloxy-4-butylsulfonate]). We prepared aqueous sinter-free inks from the particles and printed them. The particles formed highly conductive films immediately after drying. Films with spherical metal cores consistently had 40% lower conductivities than films based on nanorods. Raman and X-ray photoelectron spectroscopy revealed differences in the gold-sulfur bonds of PTEBS on rods and spheres. The fractions of bond sulfur groups implied differences in the alignment of PTEBS with the surface. More polymer molecules were bound in an edge-on configuration on spheres than on rods, where almost all polymers aligned "face-on" with the metal surface. This leads to different interface resistances: gold-polythiophene-gold interfaces between rods with π-π-tacked face-on PTEBS apparently foster electron transport along the surface-normal direction, while edge-on PTEBS does not. Molecular confinement thus increases the conductivity of hybrid inks based on highly curved nanostructures.

Plasmonic Nanozymes: Engineered Gold Nanoparticles Exhibit Tunable Plasmon-Enhanced Peroxidase-Mimicking Activity

Enzyme-mimicking inorganic nanoparticles, also known as nanozymes, have emerged as a rapidly expanding family of artificial enzymes that exhibit superior structural robustness and catalytic durability when serving as the surrogates of natural enzymes for widespread applications. However, the performance optimization of inorganic nanozymes has been pursued in a largely empirical fashion due to lack of generic design principles guiding the rational tuning of the nanozyme activities. Here we choose Au surface-roughened nanoparticles as a model plasmonic nanozyme that combines peroxidase-mimicking behaviors with tunable plasmonic characteristics to demonstrate the feasibility of fine-tuning nanozyme activities through plasmonic excitations using visible and near-infrared light sources. Taking full advantage of the unique plasmonic tunability offered by Au surface-roughened nanoparticles, we were able to unravel the detailed relationship between plasmonic excitations and nanozyme activities that underpins the hot electron-mediated working mechanism of peroxidase-mimicking plasmonic nanozymes.

High colloidal stability ZnO nanoparticles independent on solvent polarity and their application in polymer solar cells

Significant aggregation between ZnO nanoparticles (ZnO NPs) dispersed in polar and nonpolar solvents hinders the formation of high quality thin film for the device application and impedes their excellent electron transporting ability. Herein a bifunctional coordination complex, titanium diisopropoxide bis(acetylacetonate) (Ti(acac)2) is employed as efficient stabilizer to improve colloidal stability of ZnO NPs. Acetylacetonate functionalized ZnO exhibited long-term stability and maintained its superior optical and electrical properties for months aging under ambient atmospheric condition. The functionalized ZnO NPs were then incorporated into polymer solar cells with conventional structure as n-type buffer layer. The devices exhibited nearly identical power conversion efficiency regardless of the use of fresh and old (2 months aged) NPs. Our approach provides a simple and efficient route to boost colloidal stability of ZnO NPs in both polar and nonpolar solvents, which could enable structure-independent intense studies for efficient organic and hybrid optoelectronic devices.

Direct Optical and Ultrasensitive Probing of Nonequilibrium Dynamics of Carbon Monoxide in an Aqueous Phase during Biochemical Reactions

Detection of trace carbon monoxide (CO) dissolved in an aqueous phase is key for monitoring and optimizing biological and chemical gas conversions. So far, irrespective of the nonequilibrium nature of these conversion processes, because of low water solubility of CO, such detection has been performed indirectly, under the assumption of thermodynamic equilibrium, by the combination of chromatographic measurement of relatively abundant CO in a gas phase and Henry's law. Direct and sensitive detection of dissolved CO under nonequilibrium has not been explored yet. Here, we report the direct, ultrasensitive, and real-time monitoring of nonequilibrium dynamics of CO in an aqueous phase during biochemical conversions by devising miniaturized fluidic reactors with built-in CO-specific optical probes via surface-enhanced Raman spectroscopy. As the sensitive and selective probes, we fabricate ligand-free Au@Pd core-shell nanoparticle monolayers to maximize the Raman signal of single CO in the aqueous phase. We confirm that under equilibrium conditions, aqueous and gaseous CO concentrations estimated by our method are in good agreement with those measured directly and indirectly by gas chromatography (GC). We show that our probe can detect the aqueous CO concentrations as low as ca. 0.01% with high signal reproducibility, which is 200-fold more sensitive than that achieved by infrared spectroscopy. Finally, we successfully observe the nonequilibrium dynamics of the aqueous CO during biochemical reactions, which cannot be sensed by other detection methods including even indirect measurement by GC. We anticipate that our method can be widely applied not only for monitoring of biochemical gas reactions on multiple scales from a large reactor to a single-molecule level but also for molecular imaging of biological systems.

In situ and sensitive monitoring of configuration-switching involved dynamic adsorption by surface plasmon-coupled directional enhanced Raman scattering

Surface adsorption studies play a crucial role in numerous fields from surface catalysis to molecular separation. However, investigation on adsorption mechanisms has been restricted to limited analytes and approaches, which calls for an in situ and sensitive surface analysis technique capable of revealing the mechanisms as well as discriminating different adsorbates and their geometry at different adsorption stages. In this study, we employed surface plasmon-coupled directional enhanced Raman scattering (SPCR), a novel technique developed by coupling surface plasmon-coupled emission with SERS, to study conformation-switching involved dynamic adsorption with background suppression and improved sensitivity (nearly 30-fold). We obtained the isotherms for a conformation-changing Raman model analyte, malachite green. An S-type Langmuir model was fitted from the time-resolved SPCR signals sensitively and without any interference from the bulk solution. The reorientation of the analyte from a predominantly parallel configuration to a perpendicular one was captured by the dramatic increase in the intensity ratios of the adsorption-related peaks to the adsorption-unrelated peak. We believe that this new sensitive and selective SPCR technique will be a promising tool for surface adsorption kinetics analysis.

Cooperation of Hot Holes and Surface Adsorbates in Plasmon-Driven Anisotropic Growth of Gold Nanostars

Light-driven synthesis of plasmonic metal nanostructures has garnered broad scientific interests. Although it has been widely accepted that surface plasmon resonance (SPR)-generated energetic electrons play an essential role in this photochemical process, the exact function of plasmon-generated hot holes in regulating the morphology of nanostructures has not been fully explored. Herein, we discover that those hot holes work with surface adsorbates collectively to control the anisotropic growth of gold (Au) nanostructures. Specifically, it is found that hot holes stabilized by surface adsorbed iodide enable the site-selective oxidative etching of Au⁰, which leads to nonuniform growths along different lateral directions to form six-pointed Au nanostars. Our studies establish a molecular-level understanding of the mechanism behind the plasmon-driven synthesis of Au nanostars and illustrate the importance of cooperation between charge carriers and surface adsorbates in regulating the morphology evolution of plasmonic nanostructures.

Surface Coating Structure and Its Interaction with Cytochrome c in EG6-Coated Nanoparticles Varies with Surface Curvature

The composition, orientation, and conformation of proteins in biomolecular coronas acquired by nanoparticles in biological media contribute to how they are identified by a cell. While numerous studies have investigated protein composition in biomolecular coronas, relatively little detail is known about how the nanoparticle surface influences the orientation and conformation of the proteins associated with them. We previously showed that the peripheral membrane protein cytochrome c adopts preferred poses relative to negatively charged 3-mercaptopropionic acid (MPA)-gold nanoparticles (AuNPs). Here, we employ molecular dynamics simulations and complementary experiments to establish that cytochrome c also assumes preferred poses upon association with nanoparticles functionalized with an uncharged ligand, specifically ω-(1-mercaptounde-11-cyl)hexa(ethylene glycol) (EG₆). We find that the display of the EG₆ ligands is sensitive to the curvature of the surface-and, consequently, the effective diameter of the nearly spherical nanoparticle core-which in turn affects the preferred poses of cytochrome c.

Extra-Small Gold Nanospheres Decorated With a Thiol Functionalized Biodegradable and Biocompatible Linear Polyamidoamine as Nanovectors of Anticancer Molecules

Gold nanoparticles are elective candidate for cancer therapy. Current efforts are devoted to developing innovative methods for their synthesis. Besides, understanding their interaction with cells have become increasingly important for their clinical application. This work aims to describe a simple approach for the synthesis of extra-small gold nanoparticles for breast cancer therapy. In brief, a biocompatible and biodegradable polyamidoamine (named AGMA1-SH), bearing 20%, on a molar basis, thiol-functionalized repeat units, is employed to stabilize and coat extra-small gold nanospheres of different sizes (2.5, 3.5, and 5 nm in gold core), and to generate a nanoplatform for the link with Trastuzumab monoclonal antibody for HER2-positive breast cancer targeting. Dynamic light scattering, transmission electron microscopy, ultraviolet visible spectroscopy, X-ray powder diffraction, circular dichroism, protein quantification assays are used for the characterization. The targeting properties of the nanosystems are explored to achieve enhanced and selective uptake of AGMA1-SH-gold nanoparticles by in vitro studies against HER-2 overexpressing cells, SKBR-3 and compared to HER-2 low expressing cells, MCF-7, and normal fibroblast cell line, NIH-3T3. In vitro physicochemical characterization demonstrates that gold nanoparticles modified with AGMA1-SH are more stable in aqueous solution than the unmodified ones. Additionally, the greater gold nanoparticles size (5-nm) is associated with a higher stability and conjugation efficiency with Trastuzumab, which retains its folding and anticancer activity after the conjugation. In particular, the larger Trastuzumab functionalized nanoparticles displays the highest efficacy (via the pro-apoptotic protein increase, anti-apoptotic components decrease, survival-proliferation pathways downregulation) and internalization (via the activation of the classical clathrin-mediated endocytosis) in HER-2 overexpressing SKBR-3 cells, without eliciting significant effects on the other cell lines. The use of biocompatible AGMA1-SH for producing covalently stabilized gold nanoparticles to achieve selective targeting, cytotoxicity and uptake is completely novel, offering an important advancement for developing new anticancer conjugated-gold nanoparticles.

Gold nanostars as a colloidal substrate for in-solution SERS measurements using a handheld Raman spectrometer

Colloidal gold nanostars for rapid and in-solution SERS measurements of methimazole in urine using a handheld Raman spectrometer.

Manipulating chemistry through nanoparticle morphology

We demonstrate that the protonation chemistry of molecules adsorbed at nanometer distances from the surface of anisotropic gold nanoparticles can be manipulated through the effect of surface morphology on the local proton density of an organic coating. Direct evidence of this remarkable effect was obtained by monitoring surface-enhanced Raman scattering (SERS) from mercaptobenzoic acid and 4-aminobenzenethiol molecules adsorbed on gold nanostars. By smoothing the initially sharp nanostar tips through a mild thermal treatment, changes were induced on protonation of the molecules, which can be observed through changes in the measured SERS spectra. These results shed light on the local chemical environment near anisotropic colloidal nanoparticles and open an alternative avenue to actively control chemistry through surface morphology.

Aromatic thiol-modulated Ag overgrowth on gold nanoparticles: tracking the thiol's position in the core-shell nanoparticles

The employment of strong covalent interactions, such as between thiol and a metal, is a unique way to regulate the morphology and/or endow plasmonic nanostructures (PNSs) with new functionalities. However, the regulation effect of thiols and the underlying mechanism in controlling the growth of PNSs are yet to be revealed. Herein, we found that aromatic thiols (ATs) with functional groups, such as hydroxyl and carboxyl groups, were able to accelerate the Ag deposition. Theoretical calculations indicated that the benzene ring can enhance the electron donating capability of these groups and thus boost their interactions with Ag+. In addition, the PNSs modulated by ATs were exposed with high-index facets. Furthermore, taking advantage of the Ag+-assisted oxidative coupling of 4-ATP molecules pinned on the surface of Au cores, the formed DMAB molecules can be used as a Raman internal reference to trace the spatial trajectory of freshly adsorbed 4-ATP molecules, which modulated the Ag deposition. Our findings highlight the flexibility and diversity of thiol-based ligands in manipulating the particle growth and tuning the particle morphology.

Real-Time Monitoring of Ligand Exchange Kinetics on Gold Nanoparticle Surfaces Enabled by Hot Spot-Normalized Surface-Enhanced Raman Scattering

Nanoparticle surface coatings dictate their fate, transport, and bioavailability. We used a gold nanoparticle-bacterial cellulose substrate and "hot spot"-normalized surface-enhanced Raman scattering (HSNSERS) to achieve in situ and real-time monitoring of ligand exchange reactions on the gold surface. This approach enables semiquantitative determination of citrate surface coverage. Following exposure of the citrate-coated nanoparticles to a suite of guest ligands (thiolates, amines, carboxylates, inorganic ions, and proteins), the guest ligand signal exhibited first-order growth kinetics, while the desorption mediated decay of the citrate signal followed a first-order model. Guest ligand functional group chemistry dictated the kinetics of citrate desorption, while the guest ligand concentration played only a minor role. Thiolates and BSA were more efficient at ligand exchange than amine-containing chemicals, carboxylate-containing chemicals, and inorganic salts due to their higher binding energies with the AuNP surface. Amine-containing molecules overcoated rather than displaced the citrate layer via electrostatic interaction. Citrate exhibited low resistance to replacement at high surface coverages, but higher resistance at lower coverage, thus suggesting a transformation of the citrate-binding mode during desorption. High resistance to replacement in streamwater suggests that the role of surface-adsorbed citrate in nanomaterial fate and transport must be better understood.

Alkyl-capped copper oxide nanospheres and nanoprolates for sustainability: water treatment and improved lubricating performance

Metal oxide nanoparticles of different nature have been used in different fields such as therapeutics, biomarkers, tribology or environmental remediation, among others. Besides, the surface modification of such nanoparticles is of particular interest to bring designed functions. In this paper we describe the synthesis of CuO nanoparticles with two different geometries (spherical and prolate) and decorated with long alkyl chains in order to use as dye removers by adsorption and/or photo-degradation of a persistent model dye (Congo Red) and as lubricant additives to improve the tribological performance of base lubricant oils. Alkyl-functionalized CuO nanoparticles demonstrated a high stability in oily suspensions and an improvement in the friction reducing the CoF ca. 26%; the alkyl-decorated nanoparticles showed also higher adsorption kinetics for Congo Red than the neat ones following a pseudo-second-order trend, although with lower adsorption efficiency. The synthesis, surface modification and physic-chemical characterization of spherical and prolate CuO nanoparticles are described as well as their applications as lubricant additives and Congo Red photocatalytic removal.

How Fast Can Thiols Bind to the Gold Nanoparticle Surface?

Kinetics of gold nanoparticle surface modification with thiols can take more than one hour for completion. 7-mercapto-4-methylcoumarin can be used to follow the process by fluorescence spectroscopy and serves as a convenient molecular probe to determine relative kinetics. SERS studies with aromatic thiols further support the slow surface modification kinetics observed by fluorescence spectroscopy. The formation of thiolate bonds is a relatively slow process; we recommend one to two hour wait for thiol binding to be essentially complete, while for disulfides, overnight incubation is suggested.

A quantitative methodology for the study of particle-electrode impacts

Herein we provide a generic framework for use in the acquisition and analysis of the electrochemical responses of individual nanoparticles, summarising aspects that must be considered to avoid mis-interpretation of data. Specifically, we threefold highlight the importance of the nanoparticle shape, the effect of the nanoparticle diffusion coefficient on the probability of it being observed and the influence of the used measurement bandwidth. Using the oxidation of silver nanoparticles as a model system, it is evidenced that when all of the above have been accounted for, the experimental data is consistent with being associated with the complete oxidation of the nanoparticles (50 nm diameter). The duration of many single nanoparticle events are found to be ca. milliseconds in duration over a range of experiments. Consequently, the insight that the use of lower frequency filtered data yields a more accurate description of the charge passed during a nano-event is likely widely applicable to this class of experiment; thus we report a generic methodology. Conversely, information regarding the dynamics of the nano redox event is obscured when using such lower frequency measurements; hence, both data sets are complementary and are required to provide full insight into the behaviour of the reactions at the nanoscale.