Bunching and Immobilization of Ionic Liquids in Nanoporous Metal-Organic Framework

Ionic Liquids Functionalized MOFs for Adsorption

Metal-organic frameworks (MOFs) and ionic liquids (ILs) represent promising materials for adsorption separation. ILs incorporated into MOF materials (denoted as IL/MOF composites) have been developed, and IL/MOF composites combine the advantages of MOFs and ILs to achieve enhanced performance in the adsorption-based separation of fluid mixtures. The designed different ILs are introduced into the various MOFs to tailor their functional properties, which affect the optimal adsorptive separation performance. In this Perspective, the rational fabrication of IL/MOF composites is presented, and their functional properties are demonstrated. This paper provides a critical overview of an emergent class of materials termed IL/MOF composites as well as the recent advances in the applications of IL/MOF composites as adsorbents or membranes in fluid separation. Furthermore, the applications of IL/MOF in adsorptive gas separations (CO2 capture from flue gas, natural gas purification, separation of acetylene and ethylene, indoor pollutants removal) and liquid separations (separation of bioactive components, organic-contaminant removal, adsorptive desulfurization, radionuclide removal) are discussed. Finally, the existing challenges of IL/MOF are highlighted, and an appropriate design strategy direction for the effective exploration of new IL/MOF adsorptive materials is proposed.

Thermal transport properties of porous silicon filled by ionic liquid nanocomposite system

This paper investigates thermal transport in a nanocomposite system consisting of a porous silicon matrix filled with ionic liquid. Firstly, the thermal conductivity and heat capacity of two imidazolium and one ammonium ionic liquids were evaluated using the photoacoustic approach in piezoelectric configuration and differential scanning calorimetry, respectively. Then, the thermal transport properties of the composite system "ionic liquid confined inside porous silicon matrix" were investigated with the photoacoustic approach in gas-microphone configuration. The results demonstrated a significant enhancement of the thermal conductivity of the composite system when compared to the individual components, i.e. (i) more than two times for pristine porous silicon and (ii) more than eight times for ionic liquids. These results provide new paths for innovative solutions in the field of thermal management, particularly in the development of highly efficient energy storage devices.

Host-Guest Interactions of Zirconium-Based Metal-Organic Framework with Ionic Liquid

A metal-organic framework (MOF) is a three-dimensional crystalline compound made from organic ligands and metals. The cross-linkage between organic ligands and metals creates a network of coordination polymers containing adjustable voids with a high total surface area. This special feature of MOF made it possible to form a host-guest interaction with small molecules, such as ionic liquid (IL), which can alter the phase behavior and improve the performance in battery applications. The molecular interactions of MOF and IL are, however, hard to understand due to the limited number of computational studies. In this study, the structural parameters of a zirconium-based metal-organic framework (UiO-66) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, [EMIM][TFSI] were investigated via a combined experimental and computational approach using the linker model approach. When IL was loaded, the bond length and bond angle of organic linkers were distorted due to the increased electron density surrounding the framework. The increase in molecular orbital energy after confining IL stabilized the structure of this hybrid system. The molecular interactions study revealed that the combination of UiO-66 and [EMIM][TFSI] could be a promising candidate as an electrolyte material in an energy storage system.

Extraction of Gold Based on Ionic Liquid Immobilized in UiO-66: An Efficient and Reusable Way to Avoid IL Loss Caused by Ion Exchange in Solvent Extraction

Ionic liquids (ILs) have received considerable attention as a promising green solvent for extracting metal ions from aqueous solutions. However, the recycling of ILs remains difficult and challenging because of the leaching of ILs, which is caused by the ion exchange extraction mechanism and hydrolysis of ILs in acidic aqueous conditions. In this study, a series of imidazolium-based ILs were confined in a metal-organic framework (MOF) material (UiO-66) to overcome the limitations when used in solvent extraction. The effect of the various anions and cations of the ILs on the adsorption ability of AuCl₄^- was studied, and 1-hexyl-3-methylimidazole tetrafluoroborate ([HMIm]⁺[BF₄]^-@UiO-66) was used for the construction of a stable composite. The adsorption properties and mechanism of [HMIm]⁺[BF₄]^-@UiO-66 for Au(III) adsorption were also studied. The concentrations of tetrafluoroborate ([BF₄]^-) in the aqueous phase after Au(III) adsorption by [HMIm]⁺[BF₄]^-@UiO-66 and liquid-liquid extraction by [HMIm]⁺[BF₄]^- IL were 0.122 mg/L and 18040 mg/L, respectively. The results reveal that Au(III) coordinated with the N-containing functional groups, while [BF₄]^- was effectively confined in UiO-66, instead of undergoing anion exchange in liquid-liquid extraction. Electrostatic interactions and the reduction of Au(III) to Au(0) were also important factors determining the adsorption ability of Au(III). [HMIm]⁺[BF₄]^-@UiO-66 could be easily regenerated and reused for three cycles without any significant drop in the adsorption capacity.

Ionic-Liquid-Assisted One-Step Construction of Mesoporous Metal-Organic Frameworks

The synthesis of ionic-mesoporous-metal-organic frameworks (ionic-meso-MOFs) has received considerable interest in the fields of macromolecular adsorption, acid-base catalysis, ionic conductivity, etc.; yet, their synthesis still presents significant difficulties. In this study, functionalized mesoporous MIL-101-ILs (Cr) was facilely constructed via an in situ self-assembly method by using aromatic-anion-functionalized ionic liquids (ILs) as competitive ligands. It has been demonstrated that the inclusion of an aromatic moiety into an IL improves the coordination ability and is advantageous for the anchoring of ILs on Cr³⁺ via amino-metal coordination. Thus, ionic-meso-MOFs with a specific surface area of 441.9-624.9 cm²/g and an average pore diameter of 5.5 to 8.4 nm were successfully synthesized. Because of the presence of open Lewis acidic metal sites on the MOFs and basic active sites on the ILs, the resulting ionic-meso-MOFs demonstrated both an acid-base cooperative effect and a mesoporous structure, indicating a high potential for acid-base catalysis. This in situ synthesis procedure for ionic mesoporous MOFs offers a simple method for developing and fabricating multifunctional mesoporous materials.

Nanoporous Alumina Support Covered by Imidazole Moiety-Based Ionic Liquids: Optical Characterization and Application

This work analyzes chemical surface and optical characteristics of a commercial nanoporous alumina structure (NPAS) as a result of surface coverage by different imidazolium-based ionic liquids (1-butyl-3-metylimidazolium hexafluorophosphate, 3-methyl-1-octylimidazolium hexafluorophosphate, or 1-ethyl-3-methylimidazolium tetrafluoroborate). Optical characteristics of the IL/NPAS samples were determined by photoluminescence (at different excitation wavelengths (from 300 nm to 400 nm), ellipsometry spectroscopy, and light transmittance/reflectance measurements for a range of wavelengths that provide information on modifications related to both visible and near-infrared regions. Chemical surface characterization of the three IL/NPAS samples was performed by X-ray photoelectron spectroscopy (XPS), which indicates almost total support coverage by the ILs. The IL/NPAS analyzed samples exhibit different photoluminescence behavior, high transparency (<85%), and a reflection maximum at wavelength ~380 nm, with slight differences depending on the IL, while the refractive index values are rather similar to those shown by the ILs. Moreover, the illuminated I−V curves (under standard conditions) of the IL/NPAS samples were also measured for determining the efficiency energy conversion to estimate their possible application as solar cells. On the other hand, a computational quantum mechanical modeling method (DFT) was used to establish the most stable bond between the ILs and the NPAS support.

Exploring ionic liquid-laden metal-organic framework composite materials as hybrid electrolytes in metal (ion) batteries

This review focuses on the combination of metal-organic frameworks (MOFs) and ionic liquids (ILs) to obtain composite materials to be used as solid electrolytes in metal-ion battery applications. Benefiting from the controllable chemical composition, tunable pore structure and surface functionality, MOFs offer great opportunities for synthesizing high-performance electrolytes. Moreover, the encapsulation of ILs into porous materials can provide environmentally benign solid-state electrolytes for electrochemical devices. Due to the versatility of MOF-based materials, in this review we also explore their use as anodes and cathodes in Li- and Na-ion batteries. Finally, solid IL@MOF electrolytes and their implementation into Li and Na batteries have been analyzed, as well as the design and advanced manufacturing of solid IL@MOF electrolytes embedded on polymeric matrices.

Controlling the Mobility of Ionic Liquids in the Nanopores of MOFs by Adjusting the Pore Size: From Conduction Collapse by Mutual Pore Blocking to Unhindered Ion Transport

Ionic liquids (ILs) in nanoporous confinement are the core of many supercapacitors and batteries, where the mobility of the nanoconfined ILs is crucial. Here, by combining experiments based on impedance spectroscopy with molecular dynamics simulations, the mobility of a prototype IL in the nanopores of an isoreticular metal-organic framework (MOF)-series with different pore sizes is explored, where an external electric field is applied. It has been found that the conduction behavior changes tremendously depend on the pore size. For small-pore apertures, the IL cations and anions cannot pass the pore window simultaneously, causing the ions to mutually block the pores. This results in a strong concentration dependence of the ionic conduction, where the conduction drops by two orders of magnitude when filling the pores. For large-pore MOFs, the mutual hindrance of the ions in the pores is small, causing only a small concentration dependence. The cutoff between the large-pore and small-pore behavior is approximately the size of a cation-anion-dimer and increasing the pore diameter by only 0.2 nm changes the conduction behavior fundamentally. This study shows that the pore aperture size has a substantial effect on the mobility of ions in nanoporous confinement and has to be carefully optimized for realizing highly-mobile nanoconfined ILs.

Solitary Medium of a Multifunctional Ionic Liquid for Crystallizing Hierarchically Porous Metal-Organic Frameworks

Hierarchically porous metal-organic frameworks (HP-MOFs), dominating both the micro- and mesoporous regimes, show high potentials in various applications especially those involving bulky biomolecules. The templating method has been proven to be effective in the fabrication of HP-MOFs; however, complicated synthetic systems containing solvents, templates, and additives are frequently employed. Here we report the first example of designing a poly(ethylene glycol)-based alkylammonium and bromide multifunctional ionic liquid (IL) as a solitary medium to construct HP-MOFs, avoiding the involvement of any additional media. Besides the ready solubilization of MOF precursors in the multifunctional IL due to a poly(ethylene glycol) chain as the solubilizer, the ionic moiety facilitates electrostatic interaction to create a templating effect. Hence, UiO-66 with hierarchical porosity has been successfully fabricated, and such a methodology can also be applied to the construction of other HP-MOFs. The resultant HP-UiO-66 is efficient in the encapsulation of bulky biomolecule cytochrome c, and the adsorption capacity is obviously superior to that of the microporous counterpart.

Ionic Liquid@Metal-Organic Framework as a Solid Electrolyte in a Lithium-Ion Battery: Current Performance and Perspective at Molecular Level

Searching for a suitable electrolyte in a lithium-ion battery is a challenging task. The electrolyte must not only be chemically and mechanically stable, but also be able to transport lithium ions efficiently. Ionic liquid incorporated into a metal-organic framework (IL@MOF) has currently emerged as an interesting class of hybrid material that could offer excellent electrochemical properties. However, the understanding of the mechanism and factors that govern its fast ionic conduction is crucial as well. In this review, the characteristics and potential use of IL@MOF as an electrolyte in a lithium-ion battery are highlighted. The importance of computational methods is emphasized as a comprehensive tool to investigate the atomistic behavior of IL@MOF and its interaction in electrochemical environments.

Cu-Based Conductive MOF Grown in situ on Cu Foam as a Highly Selective and Stable Non-Enzymatic Glucose Sensor

A non-enzymatic electrochemical sensor for glucose detection is executed by using a conductive metal–organic framework (MOF) Cu-MOF, which is built from the 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) ligand and copper acetate by hydrothermal reaction. The Cu-MOF demonstrates superior electrocatalytic activity for glucose oxidation under alkaline pH conditions. As an excellent non-enzymatic sensor, the Cu-MOF grown on Cu foam (Cu-MOF/CF) displays an ultra-low detection limit of 0.076 μM through a wide concentration range (0.001–0.95 mM) and a strong sensitivity of 30,030 mA μM⁻¹ cm⁻². Overall, the Cu-MOF/CF exhibits a low detection limit, high selectivity, excellent stability, fast response time, and good practical application feasibility for glucose detection and can promote the development of MOF materials in the field of electrochemical sensors.

MOFs in the time domain

Many of the proposed applications of metal-organic framework (MOF) materials may fail to materialize if the community does not fully address the difficult fundamental work needed to map out the 'time gap' in the literature - that is, the lack of investigation into the time-dependent behaviours of MOFs as opposed to equilibrium or steady-state properties. Although there are a range of excellent investigations into MOF dynamics and time-dependent phenomena, these works represent only a tiny fraction of the vast number of MOF studies. This Review provides an overview of current research into the temporal evolution of MOF structures and properties by analysing the time-resolved experimental techniques that can be used to monitor such behaviours. We focus on innovative techniques, while also discussing older methods often used in other chemical systems. Four areas are examined: MOF formation, guest motion, electron motion and framework motion. In each area, we highlight the disparity between the relatively small amount of (published) research on key time-dependent phenomena and the enormous scope for acquiring the wider and deeper understanding that is essential for the future of the field.

Li+ Dynamics of Liquid Electrolytes Nanoconfined in Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are excellent platforms to design hybrid electrolytes for Li batteries with liquid-like transport and stability against lithium dendrites. We report on Li⁺ dynamics in quasi-solid electrolytes consisting in Mg-MOF-74 soaked with LiClO₄-propylene carbonate (PC) and LiClO₄-ethylene carbonate (EC)/dimethyl carbonate (DMC) solutions by combining studies of ion conductivity, nuclear magnetic resonance (NMR) characterization, and spin relaxometry. We investigate nanoconfinement of liquid inside MOFs to characterize the adsorption/solvation mechanism at the basis of Li⁺ migration in these materials. NMR supports that the liquid is nanoconfined in framework micropores, strongly interacting with their walls and that the nature of the solvent affects Li⁺ migration in MOFs. Contrary to the "free'' liquid electrolytes, faster ion dynamics and higher Li⁺ mobility take place in LiClO₄-PC electrolytes when nanoconfined in MOFs demonstrating superionic conductor behavior (conductivity σ_rt > 0.1 mS cm^-1, transport number t_Li⁺ > 0.7). Such properties, including a more stable Li electrodeposition, make MOF-hybrid electrolytes promising for high-power and safer lithium-ion batteries.

Insights in the Ionic Conduction inside Nanoporous Metal-Organic Frameworks by Using an Appropriate Equivalent Circuit

The conduction of protons and other ions in nanoporous materials, such as metal-organic frameworks (MOFs), is intensively explored with the aim of enhancing the performance of energy-related electrochemical systems. The ionic conductivity, as a key property of the material, is typically determined by using electrochemical impedance spectroscopy (EIS) in connection with a suitable equivalent circuit. Often, equivalent circuits are used where the physical meaning of each component is debatable. Here, we present an equivalent circuit for the ionic conduction of electrolytes in nanoporous, nonconducting materials between inert and impermeable electrodes without faradaic electrode reactions. We show the equivalent circuit perfectly describes the impedance spectra measured for the ion conduction in MOFs in the form of powders pressed into pellets as well as for MOF thin films. This is demonstrated for the ionic conduction of an aprotic ionic liquid, and of various protic solvents in different MOF structures. Due to the clear physical meaning of each element of the equivalent circuit, further insights into the electrical double layer forming at the MOF-electrode interface can be obtained. As a result, EIS combined with the appropriate reference circuit allows us to make statements of the quality of the MOF-substrate interface of different MOF-film samples.

Structural and Dynamic Insights into the Conduction of Lithium-Ionic-Liquid Mixtures in Nanoporous Metal-Organic Frameworks as Solid-State Electrolytes

Metal-organic framework (MOF)-based separators in Li-ion batteries (LIBs) have the potential to improve the battery performance. The mobility and conduction of lithium and organic ionic liquids (ILs) in these materials acting as (quasi) solid-state electrolytes are crucial for the battery power output. Here, we investigate the mobility of a Li-based IL in MOF nanopores and unveil the details of the conduction mechanism by molecular dynamics (MD) simulations. A complex conductivity depending on the Li-IL loading and on the IL composition is observed. Most importantly, the presence of Li prevents the collapse of the conductivity at high IL loadings. The fully atomistic MD simulations including guest-guest and guest-host interactions elucidate the competing mechanisms: Li follows a Grotthuss-like conduction mechanism with large mobility. While at small pore fillings, the Li conduction is limited by the large distance between the anions facilitating the Grotthuss-like conduction; the conduction at high pore fillings is governed by field-induced concentration inhomogeneities. Because of the small MOF pore windows, which hinders the simultaneous passage of the large IL cations and anions in opposite directions, the IL shows field-induced MOF pore blocking and ion bunching. The regions of low anion concentration and high cation concentration represent barriers for Li, decreasing its mobility. In comparison to Li-free IL, the IL bunching effect is attenuated by the formation of charge-neutral Li-anion complexes, resulting in a tremendously increased conductivity at maximum pore filling. The exploitation of this mechanism may enhance the development of advanced batteries based on IL and nanoporous separators.

Introducing electrical conductivity to metal-organic framework thin films by templated polymerization of methyl propiolate

We herein present a case study on the templated, Pd-catalyzed polymerization reaction of methyl propiolate in the confined pore space of three different surface anchored metal-organic framework (SURMOF) systems in order to introduce electrical conductivity to MOF thin films and provide predictions for potential device integrations. To gain comprehensive insight into the influence of the template on polymerization, we chose Cu(bpdc), Cu2(bdc)2(dabco) and HKUST-1 because of their different types of pore channels, 1D, quasi-1D and 3D, and their free pore volumes. Well-defined MOF thin films were prepared using layer-by-layer deposition, which allows for the application of several characterization techniques not applicable for conventional powder MOFs. With SEM, AFM, XRD, MALDI-ToF/MS, ToF-SIMS and QCM, we were able to investigate the behaviour of the polymer formation. For lower dimensional pore channels, we find a depot-like release of monomeric units leading to top-layer formation determined by desorption kinetics, whereas for the 3D channels, quick release of an excess amount of monomers was observed and polymerization proceeds perfectly. Despite polymerization issues, control over the maximum chain lengths and the molecular weight distribution was achieved depending on the dimensionality of the pore systems. For the HKUST-1 system, polymerization was optimized and we were able to measure the electrical conductivity introduced by the conjugated polymer inside the channels.

Transferring Lithium Ions in the Nanochannels of Flexible Metal-Organic Frameworks Featuring Superchaotropic Metallacarborane Guests: Mechanism of Ionic Conductivity at Atomic Resolution

Metal-organic frameworks (MOFs), owing to their unique architecture, attract consistent attention in the design of high-performance Li battery materials. Here, we report a new category of ion-conducting crystalline materials for all-solid-state electrolytes based on an MIL53(Al) framework featuring a superchaotropic metallacarborane (Li⁺CoD^-) salt and present the first quantitative data on Li⁺ ion sites, local dynamics, chemical exchange, and the formation of charge-transfer pathways. We used multinuclear solid-state nuclear magnetic resonance (ss-NMR) spectroscopy to examine the mechanism of ionic conductivity at atomic resolution and to elucidate order-disorder processes, framework-ion interactions, and framework breathing during the loading of Li⁺CoD^- species and transfer of Li⁺ ions. In this way, the MIL53(Al)@LiCoD framework was found to adopt an open-pore conformation accompanied by a minor fraction of narrow-pore channels. The inserted Li⁺ ions have two states (free and bound), which both exhibit extensive motions. Both types of Li⁺ ions form mutually communicating chains, which are large enough to enable efficient long-range charge transfer and macroscopic conductivity. The superchaotropic anions undergo high-amplitude uniaxial rotation motions supporting the transfer of Li⁺ cations along them, while the fluctuations of MOF aromatic linkers support the penetration of Li⁺ through the channel walls. Our findings provide a detailed atomic-resolution insight into the mechanism of ionic conductivity and thus have significant implications for the design of the next generation of energy-related materials.

Ion Dynamics of Monomeric Ionic Liquids Polymerized In Situ within Silica Nanopores

Polymerized ionic liquids are a promising class of versatile solid-state electrolytes for applications ranging from electrochemical energy storage to flexible smart materials that remain limited by their relatively low ionic conductivities compared to conventional electrolytes. Here, we show that the in situ polymerization of the vinyl cationic monomer, 1-ethyl-3-vinylimidazolium with the bis(trifluoromethanesulfonyl)imide counteranion, under nanoconfinement within 7.5 ± 1.0 nm diameter nanopores results in a nearly 1000-fold enhancement in the ionic conductivity compared to the material polymerized in bulk. Using insights from broadband dielectric and Raman spectroscopic techniques, we attribute these results to the role of confinement on molecular conformations, ion coordination, and subsequently the ionic conductivity in the polymerized ionic liquid. These results contribute to the understanding of the dynamics of nanoconfined molecules and show that in situ polymerization under nanoscale geometric confinement is a promising path toward enhancing ion conductivity in polymer electrolytes.

Salt nanoconfinement in zirconium-based metal-organic frameworks leads to pore-size and loading-dependent ionic conductivity enhancement

The effect of nanoscale confinement of a salt on its ionic conductivity was studied for [NEt4][TFSI] melt-loaded in three isoreticular zirconium-based MOFs: UiO-66, UiO-67, and PCN-56. Conductivity of the MOF-salt composites was up to a factor of 50 higher than the pure salt, and maximized with slightly less than full loading of the MOFs.

PY13FSI-Infiltrated SBA-15 as Nonflammable and High Ion-Conductive Ionogel Electrolytes for Quasi-Solid-State Sodium-Ion Batteries

Exploring electrolytes of high safety is essential to pave the practical route for sodium-ion batteries (SIBs) toward their important applications in large-scale energy storage and power supplies. In this regard, ionogel electrolytes (IEs) have been highlighted owing to their high ionic conductivity, prominent electrochemical and thermal stability, and, more crucially, high interfacial wettability. However, present studies lack an understanding of the interaction of IEs, which determines the ion desolvation and migration. In this article, IEs comprising an SBA-15 host, an ionic liquid, sodium salt, and poly(vinylidene fluoride)-hexafluoro propylene (PVDF-HFP) have been proposed by mechanical ball milling and roller pressing. The component ratio has been optimized based on the balance between ionic conductivity and self-supporting capability of IEs. The optimal IEs showed sufficiently high ionic conductivity (2.48 × 10^-3 S cm^-1 at 30 °C), wide electrochemical window (up to 4.8 V vs Na⁺/Na), and high Na⁺ transference number (0.37). Due to the presence of SBA-15 and an ionic liquid, the IEs exhibited much improved thermal resistance than that of the conventional organic liquid electrolytes (OLEs). Furthermore, Fourier transform infrared (FT-IR) spectroscopy revealed the hydrogen bonding interaction between silanols and the dissolved salts, not only anchoring anions for immobilization but also promoting the dissociation of sodium salts. After being matched with the Na₃V₂(PO₄)₃ (NVP) cathode and metallic Na anode, the SIBs presented a specific discharge capacity of up to 110.7 mA h g^-1 initially at room temperature with 92% capacity retention after 300 cycles. The improved safety and electrochemical performance provided insights into rationally regulating IEs and their interactions with the prospect of strengthening their practical applications in SIBs.

Controlling water structure and behavior: design principles from metal organic nanotubular materials

Water exhibits unique and unexpected behavioral and structural changes when confined to the nanoscale, notably within the pores of metal–organic nanotubes.