Near-Infrared Emissive Discrete Platinum(II) Metallacycles: Synthesis and Application in Ammonia Detection

Pt(II) Tetrafacial Barrel with Aggregation-Induced Emission for Sensing

A new tetraphenylpyrazine-based tetraimidazole ligand (L) was synthesized and used for subcomponent self-assembly with cis-(tmeda)Pd(NO3)2 and cis-Pt(PEt3)2(OTf)2, leading to the formation of two tetrafacial barrels [Pd8L4(tmeda)8](NO3)16 (1) and [Pt8L4(PEt3)16](OTf)16 (2), respectively. Although ligand L is aggregation-induced emission (AIE) active, barrel 2 showed a magnificently higher AIE activity than ligand L, while 1 failed to retain the AIE properties of the ligand. Pd(II) barrel 1, undergoing an aggregation-caused quenching (ACQ) phenomenon, nullified the AIE activity of the ligand to be used in the photophysical application. The enhanced emission in the aggregated state of Pt(II) barrel 2 was used for the recognition of picric acid (PA), which is explosive in nature and one of the groundwater contaminants in landmine areas. The recognition of picric acid was found to be selective in comparison with that of other nitroaromatic compounds (NACs), which could be attributed to ground-state complex formation and resonance energy transfer between picric acid and barrel 2. The use of new AIE-active assembly 2 for selective detection of PA with a low detection limit is noteworthy.

Self-Assembly of an [M8 L24 ]16+ Intertwined Cube and a Giant [M12 L16 ]24+ Orthobicupola

Through coordination-driven self-assembly, aesthetically captivating structures can be formed by tuning the length or flexibility of various components. The self-assembly of an elongated rigid terphenyl-based tetra-pyridyl ligand (L1) with a cis-Pd(II) acceptor produces an [M12 L16 ]24+ triangular orthobicupola structure (1). When flexibility is introduced into the ligand by the incorporation of a -CH2 - group between the dipyridylamine and terphenyl rings in the ligand (L2), anunique [M8 L24 ]16+ water-soluble 'intertwined cubic structure' (2) results. The inherent flexibility of ligand L2 might be the key factor behind the formation of the thermodynamically stable and 'intertwined cubic structure' in this scenario. This research showcases the ability to design and fabricate novel, topologically distinctive molecular structures by a straightforward and efficient approach.

Recent advances on the construction of long-wavelength emissive supramolecular coordination complexes for photo-diagnosis and therapy

Recently, metal-based drugs have attracted relentless interest in the biomedical field. However, their short excitation/emission wavelengths and unsatisfactory therapeutic efficiency limit their biological applications in vivo. Currently, the second near-infrared window (NIR-II, 1000-1700 nm) provides more accurate imaging and therapeutic options. Thus, there has been a constant focus on developing multifunctional NIR metal agents for imaging and therapy that have deeper tissue penetration. Fortunately, supramolecular coordination complexes (SCCs) formed by the coordination-driven self-assembly of NIR-II emissive ligands can address the above issues. Importantly, metal receptors with chemotherapeutic properties in SCCs can bind to luminescent ligands, thus becoming a versatile therapeutic platform for chemotherapy, imaging and phototherapy. In this context, we systematically summarize the evolution of NIR-II emissive SCCs for biomedical applications and discuss future challenges and prospects.

Self-Assembly and Photothermal Conversion of MetallaRussian Doll and Metalla[2]catenanes Induced via Multiple Stacking Interactions

A variety of organometallic supramolecular architectures have been constructed over the past decades and their properties were also explored via different strategies. However, the synthesis of metalla-Russian doll is still a fascinating challenge. Herein, a series of new coordination supramolecular complexes, including a metalla-Russian doll, metalla[2]catenanes, and metallarectangles, were synthesized by using meticulously selected Cp*Rh (Cp* = η5-C5Me5) building units (E1, E2, and E3) and three rigid anthracylpyridine ligands (L1, L2, and L3) via a self-assembly strategy. While the combination of the short ligand L1 and E1 or E2 generated two metallarectangles, the longer ligand L2 containing an alkynyl group resulted in two new [2]catenanes, most likely due to which the strong electron-donating effect of alkynyl groups causes self-accumulation. Interestingly, an unusual Russian doll assembly was obtained through the reaction of L3 and E3 based on sextuple π···π stacking interactions. Furthermore, the dynamic structural conversion between [2]catenanes and the corresponding metallarectangles could be observed through concentration-, solvent-, and guest-induced effects. The [2]catenane complexes 4b displayed efficient photothermal conversion efficiency in solution (20.2%), in comparison with other organometallic macrocycles. We believe that π···π stacking interactions generate active nonradiative pathways and promote radiative photodeactivation pathways. This study proves the versatility of half-sandwich building units, not only to build complicated supramolecular topologies but also in effective functional materials for various appealing applications.

Synthesis of an Adaptable Molecular Barrel and Guest Mediated Stabilization of Its Metastable Higher Homologue

Structural and functional modulation of three-dimensional artificial macromolecular systems is of immense importance. Designing supramolecular cages that can show stimuli mediated reversible switching between higher-order structures is quite challenging. We report here construction of a Pd₆ trifacial barrel (1) by coordination self-assembly. Surprisingly, barrel 1 was found to exhibit guest-responsive behavior. In presence of fullerenes C₆₀ and C₇₀, 1 unprecedentedly transformed to its metastable higher homologue Pd₈ tetrafacial barrel (2), forming stable host-guest complexes (C₆₀)₃⊂2 and (C₇₀)₂⊂2, respectively. Again, encapsulated fullerenes could be extracted from the cavity of 2 using 1,2-dichlorobenzene, leading to its facile conversion to the parent trifacial barrel 1. Such reversible structural interconversion between an adaptable molecular barrel and its guest stabilized higher homologue is an uncommon observation.

Near-infrared metal agents assisting precision medicine: from strategic design to bioimaging and therapeutic applications

Metal agents have made incredible strides in preclinical research and clinical applications in recent years, but their short emission/absorption wavelengths continue to be a barrier to their distribution, therapeutic action, visual tracking, and efficacy evaluation. Nowadays, the near-infrared window (NIR, 650-1700 nm) provides a more accurate imaging and treatment option. Thus, there has been ongoing research focusing on developing multifunctional NIR metal agents for imaging and therapy that have deeper tissue penetration. The design, characteristics, bioimaging, and therapy of NIR metal agents are covered in this overview of papers and reports published to date. To start with, we focus on describing the structure, design strategies, and photophysical properties of metal agents from the NIR-I (650-1000 nm) to NIR-II (1000-1700 nm) region, in order of molecular metal complexes (MMCs), metal-organic complexes (MOCs), and metal-organic frameworks (MOFs). Next, the biomedical applications brought by these superior photophysical and chemical properties for more accurate imaging and therapy are discussed. Finally, we explore the challenges and prospects of each type of NIR metal agent for future biomedical research and clinical translation.

Photocatalysis in Water-Soluble Supramolecular Metal Organic Complex

As an emerging subset of organic complexes, metal complexes have garnered considerable attention owing to their outstanding structures, properties, and applications. In this content, metal-organic cages (MOCs) with defined shapes and sizes provide internal spaces to isolate water for guest molecules, which can be selectively captured, isolated, and released to achieve control over chemical reactions. Complex supramolecules are constructed by simulating the self-assembly behavior of the molecules or structures in nature. For this purpose, massive amounts of cavity-containing supramolecules, such as metal-organic cages (MOCs), have been extensively explored for a large variety of reactions with a high degree of reactivity and selectivity. Because sunlight and water are necessary for the process of photosynthesis, water-soluble metal-organic cages (WSMOCs) are ideal platforms for photo-responsive stimulation and photo-mediated transformation by simulating photosynthesis due to their defined sizes, shapes, and high modularization of metal centers and ligands. Therefore, the design and synthesis of WSMOCs with uncommon geometries embedded with functional building units is of immense importance for artificial photo-responsive stimulation and photo-mediated transformation. In this review, we introduce the general synthetic strategies of WSMOCs and their applications in this sparking field.

Anthracene-Containing Metallacycles and Metallacages: Structures, Properties, and Applications

Due to its highly conjugated panel-like structure and unique photophysical and chemical features, anthracene has been widely used for fabricating attractive and functional supramolecular assemblies, including two-dimensional metallacycles and three-dimensional metallacages. The embedded anthracenes in these assemblies often show synergistic effects on enhancing the desired supramolecular and luminescent properties. This review focuses on the metallasupramolecular architectures with anthracene-containing building blocks, as well as their applications in host-guest chemistry, stimulus response, molecular sensing, light harvesting, and biomedical science.

Fluorescent cyclophanes and their applications

With the serendipitous discovery of crown ethers by Pedersen more than half a century ago and the subsequent introduction of host-guest chemistry and supramolecular chemistry by Cram and Lehn, respectively, followed by the design and synthesis of wholly synthetic cyclophanes-in particular, fluorescent cyclophanes, having rich structural characteristics and functions-have been the focus of considerable research activity during the past few decades. Cyclophanes with remarkable emissive properties have been investigated continuously over the years and employed in numerous applications across the field of science and technology. In this Review, we feature the recent developments in the chemistry of fluorescent cyclophanes, along with their design and synthesis. Their host-guest chemistry and applications related to their structure and properties are highlighted.

An Adaptable Water-Soluble Molecular Boat for Selective Separation of Phenanthrene from Isomeric Anthracene

Anthracene crude oil is a common source of phenanthrene for its industrial use. The isolation of phenanthrene from this source is a challenging task due to very similar physical properties to its isomer anthracene. We report here a water-soluble Pd(II) molecular boat (MB1) with unusual structural topology that was obtained by assembling a flexible tetrapyridyl donor (L) with a cis-Pd(II) acceptor. The flexible backbone of the boat enabled it to breathe in the presence of a guest optimizing the fit within the cavity. The boat binds phenanthrene more strongly than anthracene, which enabled separation of phenanthrene with an >98% purity from an equimolar mixture of the two isomers using MB1 as an extracting agent. MB1 represents a unique example of a coordination receptor suitable for selective aqueous extraction of phenanthrene from anthracene with reusability of several cycles.

Pt(ii)-coordinated tricomponent self-assemblies of tetrapyridyl porphyrin and dicarboxylate ligands: are they 3D prisms or 2D bow-ties?

Thermodynamically favored simultaneous coordination of Pt(ii) corners with aza- and carboxylate ligands yields tricomponent coordination complexes with sophisticated structures and functions, which require careful structural characterization to paint accurate depiction of their structure-function relationships. Previous reports claimed that heteroleptic coordination of cis-(Et3P)2PtII with tetrapyridyl porphyrins (M'TPP, M' = Zn or H2) and dicarboxylate ligands (XDC) yielded 3D tetragonal prisms containing two horizontal M'TPP faces and four vertical XDC pillars connected by eight Pt(ii) corners, even though such structures were not supported by their 1H NMR data. Through extensive X-ray crystallographic and NMR studies, herein, we demonstrate that self-assembly of cis-(Et3P)2PtII, M'TPP, and four different XDC linkers having varied lengths and rigidities actually yields bow-tie (⋈)-shaped 2D [{cis-(Et3P)2Pt}4(M'TPP) (XDC)2]4+ complexes featuring a M'TPP core and two parallel XDC linkers connected by four heteroleptic PtII corners instead of 3D prisms. This happened because (i) irrespective of their length (∼7-11 Å) and rigidity, the XDC linkers intramolecularly bridged two adjacent pyridyl-N atoms of a M'TPP core via PtII corners instead of connecting two cofacial M'TPP ligands and (ii) bow-tie complexes are entropically favored over prisms. The electron-rich ZnTPP core of a representative bow-tie complex selectively formed a charge-transfer complex with highly π-acidic 1,4,5,8,9,12-hexaazatriphenylene-2,3,6,7,10,11-heaxacarbonitrile but not with a π-donor such as pyrene. Thus, this work not only produced novel M'TPP-based bow-tie complexes and demonstrated their selective π-acid recognition capability, but also underscored the importance of proper structural characterization of supramolecular assemblies to ensure accurate depiction of their structure-property relationships.

Discrete Platinum(II) Metallacycles with Inner- and Outer-Modified 9,10-Distyrylanthracene: Design, Self-Assembly, and Luminescence Properties

To completely unravel the relationship between structures and luminescence properties of inner- and outer-modified metallacycles, two rhombic metallacycles S1 and S2 with 9,10-distyrylanthracene (DSA) were constructed herein via the design of DSA moieties on the inside or outside of metallacycles. Similar building blocks of the two metallacycles led to the same emission wavelengths in a dilute solution. In contrast, their fluorescence emissions in the aggregation and solid states were significantly different and revealed interesting emission behaviors from structures with inner- and outer-modified design. Finally, based on their luminescence properties, a tunable solid-state fluorescence emissive material was easily obtained by the mixing of two supramolecules in different ratios. This unique design suggested that the modified position of fluorophores exerts a key impact on the adjustment of luminescence from a dilute solution to the aggregated state and will be of great significance for the development of luminescent materials based on supramolecules.

High-Performance NMHC Detection Enabled by a Perylene Bisimide-Cored Metallacycle Complex-Based Fluorescent Film Sensor

Non-methane hydrocarbons (NMHCs) can serve as precursors of ozone and photochemical smog, and hence their highly efficient detection is of great importance for air quality monitoring. Here, we synthesized a new fluorescent perylene bisimide (PBI)-cored metallacycle complex through coordination-driven self-assembly and used it for the production of a fluorescent film sensor. The unique rectangular structure of the developed fluorophore endows the sensor with enhanced sensing performance and discriminability to n-alkanes (C_5-10). Specifically, the experimental detection limits for n-pentane, n-hexane, and n-decane are 39, 7, and 1.4 mg/m³, respectively, and the corresponding linear ranges are from 39 to 2546, 7 to 1745, and 1.4 to 85 mg/m³, respectively. Moreover, the sensing is fully reversible. In tandem with a gas chromatographic separation system, the film sensor showed comparable detection ability for the n-alkanes with a commercial flame ionization detector (FID), while the film sensor needs no hydrogen; it occupies a much smaller size (30 × 30 × 44 mm³) and consumes less energy (0.215 W). Further studies demonstrated that the developed sensor can be used for on-site and real-time quantification of NHMCs, laying the foundation for developing into a portable detector.

Photocatalysis in Supramolecular Fluorescent Metallacycles and Metallacages

The utilization of photocatalytic techniques for achieving light-to-fuel conversion is a promising way to ease the shortage of energy and degradation of the ecological environment. Fluorescent metallacycles and metallacages have drawn considerable attention and have been used in widespread fields due to easy preparation and their abundant functionality including photocatalysis. This review covers recent advances in photocatalysis in discrete supramolecular fluorescent metallacycles and metallacages. The developments in the utilization of the metallacycles skeletons and the effect of fluorescence-resonance energy transfer for photocatalysis are discussed. Furthermore, the use of the ligands decorated by organic chromophores or redox metal sites in metallacages as photocatalysts and their ability to encapsulate appropriate catalytic cofactors for photocatalysis are summarized. For the sake of brevity, macrocycles and cages with inorganic coordination complexes such as ruthenium complexes and iridium complexes are not included in this minireview.

Anthracene-induced formation of highly twisted metallacycle and its crystal structure and tunable assembly behaviors

Polycyclic aromatic hydrocarbons (PAHs) continue to attract increasing interest with respect to their applications as luminescent materials. The ordered structure of the metal-organic complex facilitates the selective integration of PAHs that can be tuned to function cooperatively. Here, a unique highly twisted anthracene-based organoplatinum metallacycle was prepared via coordination-driven self-assembly. Single-crystal X-ray diffraction analysis revealed that the metallacycle was twisted through the cooperation of strong π···π stacking interactions and steric hindrance between two anthracene-based ligands. Notably, the intramolecular twist and aggregation behavior introduced restrictions to the conformational change of anthracenes, which resulted in increased emission intensity of the metallacycle in solution. The emission behaviors and suprastructures based on the highly twisted metallacycle can be modulated by the introduction of different solvents. This study demonstrates that this metallacycle with highly twisted structure is a promising candidate for sensing and bioimaging applications.

A Self-Assembled Palladium(II) Barrel for Binding of Fullerenes and Photosensitization Ability of the Fullerene-Encapsulated Barrel

Fullerene extracts obtained from fullerene soot lack their real application due to their poor solubility in common solvents and difficulty in purification. Encapsulation of these extracts in a suitable host is an important approach to address these issues. We present a new Pd₆ barrel (1), which is composed of three 1,4-dihydropyrrolo[3,2-b]pyrrole panels, clipped through six cis-Pd^II acceptors. Large open windows and cavity make it an efficient host for a large guest. Favorable interactions between the ligand and fullerene (C₆₀ and C₇₀ ) allows the barrel to encapsulate fullerene efficiently. Thorough investigation reveals that barrel 1 has a stronger binding affinity towards C₇₀ over C₆₀ , resulting in the predominant extraction of C₇₀ from a mixture of the two. Finally, the fullerene encapsulated barrels C₆₀ ⊂1 and C₇₀ ⊂1 were found to be efficient for visible-light-induced singlet oxygen generation. Such preferential binding of C₇₀ and photosensitizing ability of C₆₀ ⊂1 and C₇₀ ⊂1 are noteworthy.

Supramolecular Coordination Complexes as Optical Biosensors

In recent years, luminescent supramolecular coordination complexes (SCCs), including 2D-metallacycles and 3D-metallacages have been utilised for biomolecular analysis. Unlike small-molecular probes, the dimensions, size, shape, and flexibility of these complexes can easily be tuned by combining ligands designed with particular geometries, symmetries and denticity with metal ions with strong geometrical binding preferences. The well-defined cavities that result, in combination with the other non-covalent interactions that can be programmed into the ligand design, facilitate great selectivity towards guest binding. In this Review we will discuss the application of luminescent metallacycles and cages in the binding and detection of a wide range of biomolecules, such as carbohydrates, proteins, amino acids, and biogenic amines. We aim to explore the effect of the structural diversity of SCCs on the extent of biomolecular sensing, expressed in terms of sensitivity, selectivity and detection range.

Polymeric Systems Containing Supramolecular Coordination Complexes for Drug Delivery

Cancer has become a common disease that seriously endangers human health and life. Up to now, the essential treatment method has been drug therapy, and drug delivery plays an important role in cancer therapy. To improve the efficiency of drug therapy, researchers are committed to improving drug delivery methods to enhance drug pharmacokinetics and cancer accumulation. Supramolecular coordination complexes (SCCs) with well-defined shapes and sizes are formed through the coordination between diverse functional organic ligands and metal ions, and they have emerged as potential components in drug delivery and cancer therapy. In particular, micelles or vesicles with the required biocompatibility and stability are synthesized using SCC-containing polymeric systems to develop novel carriers for drug delivery that possess combined properties and extended system tunability. In this study, the research status of SCC-containing polymeric systems as drug carriers and adjuvants for cancer treatment is reviewed, and a special focus is given to their design and preparation.

Redox-Active Supramolecular Heteroleptic M4 L2 L'2 Assemblies with Tunable Interior Binding Site

Three Pt4 L2 L'2 heteroleptic rectangles (1-3), containing ditopic redox-active bis-pyridine functionalized perylene bisimide (PBI) ligands PBI-pyr2 (L) are reported. Co-ligand L' is a dicarboxylate spacer of varying length, leading to modified overall size of the assemblies. 1 H NMR spectroscopy reveals a trend in the splitting and upfield chemical shift of the PBI-hydrogens in the rectangles with respect to free PBI, most pronounced with the largest strut length (3) and least with the smallest strut length (1). This is attributed to increased rotational freedom of the PBI-pyr2 ligand over its longitudinal axis (Npy -Npy ), due to increased distance between the PBI-surfaces, which is corroborated by VT-NMR measurements and DFT calculations. The intramolecular motion entails desymmetrization of the two PBI-ligands, in line with cyclic voltammetry (CV) data. The first (overall two-electron) reduction event and re-oxidation for 1 display a subtle peak-to-peak splitting of 60 mV, whilst increased splitting of this event is observed for 2 and 3. The binding of pyrene in 1 is probed to establish proof of concept of host-guest chemistry enabled by the two PBI-motifs. Fitting the binding curve obtained by 1 H NMR titration with a 1:1 complex formation model led to a binding constant of 964±55 m-1 . Pyrene binding is shown to directly influence the redox-chemistry of 1, resulting in a cathodic and anodic shift of approximately 46 mV on the first and second reduction event, respectively.

A tetraphenylethene-based Pd2L4 metallacage with aggregation-induced emission and stimuli-responsive behavior

A tetraphenylethene-based Pd2L4 metallacage was self-assembled from four TPE-pyridine ligands with two Pd2+ ions. This metallacage with D4 symmetry exhibited a classical aggregation-induced emission property in different solvents and reversible stimuli-responsive behaviour with chloride ions and silver ions, successively.

Recent developments in the construction and applications of platinum-based metallacycles and metallacages via coordination

Coordination-driven suprastructures have attracted much interest due to their unique properties. Among these structures, platinum-based architectures have been broadly studied due to their facile preparation. The resultant two- or three-dimensional (2D or 3D) systems have many advantages over their precursors, such as improved emission tuning, sensitivity as sensors, and capture and release of guests, and they have been applied in biomedical diagnosis as well as in catalysis. Herein, we review the recent results related to platinum-based coordination-driven self-assembly (CDSA), and the text is organized to emphasizes both the synthesis of new metallacycles and metallacages and their various applications.

Coordination-Driven Self-Assembled Metallacycles Incorporating Pyrene: Fluorescence Mutability, Tunability, and Aromatic Amine Sensing

Constructing polycyclic aromatics-based, highly emissive fluorophores with good solubility and tunable aggregated structures and properties is of great importance for film fabrication, solution processing, and relevant functionality studies. Herein, we describe a general strategy to endow conventional organic fluorophores with enhanced solubility and modulated fluorescent properties via their incorporation into coordination-driven self-assembled metallacycles. A widely used fluorophore, pyrene, was decorated with two pyridyl groups to yield functionalized pyrene 4. Mixing 4 with three aromatic dicarboxylates with different lengths and a 90° Pt(II) metal acceptor in a 2:2:4 stoichiometric ratio resulted in the formation of three metallacycles, 1, 2, and 3. The metallacycles display good solubility in polar organic solvents, highly aggregation-dependent fluorescence, and size-dependent emissions at higher concentrations. Moreover, metallacycle 2-based, silica-gel-supported film as fabricated not only is more emissive than the ligand 4-based one but also displays much improved sensing properties for amines in the vapor state, as demonstrated by significantly increased response speed and decreased recovery time. The enhanced solubility, unique fluorescence behavior, and multi-factor modulation character show that coordination-driven self-assembly can be utilized for the development of new fluorophores through simple modification of conventional fluorophores. The fluorophores synthesized this way possess not only complex topological structures but also good modularity and tunability in fluorescence behavior, which are important for grafting multi-stage energy-transfer systems necessary for the development of high-performance sensing materials.

Strongly luminescent 5d/4f heterometal–organic macrocycles with open metal sites: post-assembly modification and sensing

Strongly luminescent 5d/4f heterometal–organic macrocycles featuring open metal sites have been constructed, along with their post-assembly modification and sensing properties.

Recent developments in the construction of metallacycle/metallacage-cored supramolecular polymers via hierarchical self-assembly

Supramolecular polymers have received considerable attention during the last few decades due to their scientific value in polymer chemistry and profound implications for future developments of advanced materials. Discrete supramolecular coordination complexes (SCCs) with well-defined size, shape, and geometry have been widely employed to construct hierarchical systems by coordination-driven self-assembly with the spontaneous formation of metal-ligand bonds, which results in the formation of well-defined two-dimensional (2D) metallacycles or three-dimensional (3D) metallacages with high functionalities. The incorporation of discrete SCCs into supramolecular polymers by the orthogonal combination of metal-ligand coordination and other noncovalent interactions or covalent bonding could further facilitate the construction of novel supramolecular polymers with hierarchical architectures and multiple functions including controllable uptake and release of guest molecules, providing a flexible platform for the development of smart materials. In this review, the recent progress in metallacycle/metallacage-cored supramolecular polymers that were constructed by the combination of metal-ligand interactions and other orthogonal interactions (including hydrophobic or hydrophilic interactions, hydrogen bonding, van der Waals forces, π-π stacking, electrostatic interactions, host-guest interactions and covalent bonding) has been discussed. In addition, the potential applications of metallacycle/metallacage-cored supramolecular polymers in the areas of light emitting, sensing, bio-imaging, delivery and release, etc., are also presented.

Hierarchical Self-Assembly of a Water-Soluble Organoplatinum(II) Metallacycle into Well-Defined Nanostructures

A water-soluble metallosupramolecular hexagon containing pendant methyl viologen (MV) and trimethylammonium units at the vertices has been synthesized via an organoplatinum(II) ← pyridyl coordination-driven self-assembly reaction. The MV units of the metallacycle were further utilized in the formation of a heteroternary complex with cucurbit[8]uril and a galactose-functionalized naphthalene derivative, yielding a metallacycle-cored carbohydrate cluster that was subsequently ordered into nanospheres and tapes, depending upon the concentration.

An Aggregation-Induced Emission-Based "Turn-On" Fluorescent Probe for Facile Detection of Gaseous Formaldehyde

Gaseous formaldehyde (FA), a common indoor pollutant, presents a serious threat to human health. As an efficient tool for FA detection, fluorescent probes exhibit the advantages of low cost, ease of use, facile operation, etc. However, previously developed FA fluorescent probes are mostly based on fluorophores with aggregation-caused quenching features and thus require dispersion in solvent to detect FA. In this study, a fluorescent probe (TPE-FA) based on an aggregation-induced emission (AIE) fluorophore (tetraphenylethylene) has been developed for facile detection of gaseous FA through a fluorescence "turn-on" response. TPE-FA reacts with FA through 2-aza-Cope sigmatropic rearrangement. Based on the AIE features of TPE-FA, we fabricated a portable solid sensor, FA test plate, by directly loading TPE-FA on high performance thin-layer chromatography silica gel plate. The FA test plate achieved sensitive, selective, and quantitative detection of gaseous FA. The detection limit (0.036 mg/m³) of the FA test plate is lower than the air quality guideline value of gaseous FA (0.1 mg/m³) recommended by WHO. As a solid sensor for gaseous FA, the FA test plate based on AIE molecule is portable, which enables safer and more convenient use and transport compared to solution-based sensors.