Europium-Pyridinedicarboxylate-Adenine Light-Up Fluorescence Nanoprobes for Selective Detection of Phosphate in Biological Fluids

Packaged europium/fluorescein-based hydrogen bond organic framework as ratiometric fluorescent probe for visual real-time monitoring of seafood freshness

The freshness of sea food has always been the focus of attention from consumers, and food-safety issues are in urgent need of efficient approaches. A HOF-based ratiometric fluorescence probe (HOF-FITC/Eu) featuring superior amine-response, offers the real-time and visual detection of seafood freshness. Via intermolecular hydrogen bond interaction to form hydrogen-bonded organic frameworks (HOFs), which serve as a structural basis for the conjugate loading of pH-sensitive fluorescein (5-FITC) and coordination doping of lanthanide Eu3+. Amine vapors stimulate the dual-wavelength (525 nm and 616 nm) characteristic fluorescence of HOF-FITC/Eu with an inverse trend, resulting in an increase of the ratio of I525 to I616 accompanied by a distinct color transition from red to green. Prepared HOF-FITC/Eu featuring sensitive red-green color change characteristics of amine response are readily dripped into composite films of filter paper through integrated smartphone and 254 nm UV lamp as mobile observation devices to on-site monitor the freshness of raw fish and shrimp samples. The intelligent food probe HOF-FITC/Eu opens a novel material assembly type for fluorescence sensing and a potential pathway for other functional materials in the field of investigational food.

Dual-emission Tb-based coordination polymer as a ratiometric fluorescence probe for the detection of phosphate

A simple, sensitive dual-emission probe was developed for the detection of phosphate (Pi). The probe Tb-BTB/DPA was synthesized by mixing dual-ligand, 1,3,5-tri(4-carboxyphenyl) benzene (H3BTB) and dipicolinic acid (DPA), with metal ions Tb3+ in ethanol-water solution at 40℃ for 2 h. Tb-BTB/DPA exhibits two emission peaks, the emission at 362 nm is attributed to H3BTB, an energy transfer between Tb3+ nodes, and DPA further enhances the fluorescence of Tb3+ at 544 nm. Pi competes with ligand H3BTB to coordinate Tb3+, resulting in partial collapse of the Tb-BTB/DPA structure and interrupting the electron transfer between H3BTB and Tb3+. Therefore, the emission at 362 nm is enhanced, while the emission at 544 nm is unchanged, and a ratiometric fluorescence method is developed to detect Pi. Tb-BTB/DPA exhibits good linearity within the Pi concentration range (0.1-50 µmol/L), and the detection limit was 25.8 nmol/L. This study provides a new way to prepare probes with dual emission sensing properties.

A smartphone-intergrated dual-emission fluorescent nanoprobe for visual and ratiometric detection of anthrax biomarkers

A novel dual-emission fluorescent nanoprobe based on rare-earth nanosheets was fabricated to detect 2,6-pyridine dicarboxylic acid (DPA), which is the biomarker of Bacillus anthracis. 2-amino terephthalic acid (BDC-NH2) and surfactant sodium dodecyl sulfate (SDS) were co-intercalated into layered europium hydroxide (LEuH) to prepare the organic/inorganic composite, which was delaminated to obtain the rare-earth nanosheets. The ratio detection of DPA is possible due to the antenna effect between DPA and Eu3+. The nanoprobe shows high accuracy and sensitivity due to the large specific surface area of the rare-earth nanosheets. The limit of detection (LOD) is 4.4 nM for DPA in the range of 0-20 μM. In addition, a more convenient and faster smartphone-based visual detection platform was established based on the obvious color change. This work offers an effective way for developing visual sensing platforms, which opens a new path for designing fluorescent probes with superior sensing capabilities.

Amorphous amEu-NH2BDC and amTb-NH2BDC as ratio fluorescence probes for smartphone-integrated naked eye detection of bacillus anthracis biomarker

The abnormal concentration of anthrax spore biomarker 2,6-pyridinedicarboxylic acid (2,6-DPA) will seriously affect public health. Therefore, a sensitive and rapid assay for 2,6-DPA monitoring is of vital importance. In this work, novel nano-sized amorphous Eu-NH2BDC (amEu-NH2BDC) and amorphous Tb-NH2BDC (amTb-NH2BDC) metal organic frameworks are prepared by adjusting the ratio of metal and ligand, respectively. Both of them exhibit highly sensitive and selective ratiometric fluorescence detection for 2,6-DPA with wider linear range and lower detection limit in aqueous solutions and human serum. Attributed to the coordination effect of 2,6-DPA in triggering the characteristic fluorescence emissions of Eu3+or Tb3+ by replacing coordinated solvent molecules, as evidenced by ultraviolet-visible spectroscopy, the fluorescence lifetimes analysis, thermal gravimetric analysis, Fourier-transform infrared spectroscopy, density functional theory (DFT) simulations and X-ray photoelectron spectroscopy. In addition, the amEu-NH2BDC or amTb-NH2BDC loaded paper-based microsensors are constructed for real-time and sensitive detection of 2,6-DPA and coupled with a smartphone-assisted visual portable device.

Coordination-assembled phosphorescent microstructure from RTP HOF and Eu3+-doping ZGO:Mn phosphors for cancer biomarker amplification detection and information encryption

The ultra-long room temperature phosphorescent hydrogen-bonded organic framework (RTP HOF) materials can achieve long afterglow via ligand hydrogen bond interaction and water implement to suppress the non-radiative decays by matrices rigidification, and its electron donor conjugated structure is first developed as a phosphorescent quencher. The Eu3+/Mn2+ co-doped Zn2GeO4 phosphors (ZGO:Mn, Eu) with abundant metal sites and enhanced phosphorescence were synthesized as response factors and electron acceptors, combined with RTP HOFs to form microstructures featuring multi-color modulation, as an high-level anti-counterfeiting platform and lysophosphatidic acid (LPA) detection unit. LPA is an ideal plasma biomarker for early diagnosis of ovarian and other gynecologic cancers. This detection strategy relies on the differential coordination substitution to restore ZGO:Mn, Eu phosphorescence through synergistic coordination of LPA and the hydrophobic assistance of LPA, and dual functional groups identification of LPA achieve specific detection at the nanomolar level. The anti-counterfeiting platform can fetch specific information by controlling the afterglow distinction and excited light from ZGO:Mn, Eu and RTP HOF. This study not only provides a typical case of the preparation of two phosphors with heterogeneous optical properties, but also expands the application field of combined phosphors as intelligent luminescent materials.

Few-layered boron nitride nanosheet as a non-metallic phosphatase nanozyme and its application in human urine phosphorus detection

Human urine phosphorus (existing in the form of phosphate) is a biomarker for the diagnosis of several diseases such as kidney disease, hyperthyroidism, and rickets. Therefore, the selective detection of phosphate in urine samples is crucial in the field of clinical diagnosis. Herein, we reported the phosphatase-like catalytic activity of few-layered h-BNNS for the first time. As the phosphatase-like activity of few-layered h-BNNS could be effectively inhibited by phosphate, a selective fluorescent method for the detection of phosphate was proposed. The linear range for phosphate detection is 0.5-10 µM with a detection limit of 0.33 µM. The fluorescent method was then explored for the detection of human urine phosphorus in real samples. The results obtained by the proposed method were consistent with those of the traditional method, indicating that the present method has potential application for urine phosphorus detection in clinical disease diagnosis.

Self-Calibrating Lanthanide Infinite Coordination Polymer Constructs Fluorescent Probes: A Sensitive Approach for Early Diagnosis of Hepatocellular Carcinoma and Environmental Analysis

The development of a self-calibrating ratio fluorescence probe without the need for additional substrates is a major advancement in biosensing. In this study, at room temperature, a self-calibrating infinite coordination polymer (SSA-Tb-ATP ICPs) has been proposed by self-assembling adenosine triphosphate (ATP) with 5-sulfosalicylic acid (SSA) and Tb3+. Due to the antenna effect, SSA-Tb-ATP ICPs exhibited strong green fluorescence emission of Tb3+ (at 547 nm) and blue fluorescence emission of SSA (at 407 nm). This material offers several advantages over existing detection methods, including simplicity of synthesis and exceptional sensitivity. Our self-calibrating SSA-Tb-ATP ICPs demonstrated excellent performance in detecting alkaline phosphatase (ALP) and phosphate (Pi) in both serum and environmental samples with detection limits of 0.076 U/L and 0.025 μM, respectively. Moreover, we successfully employed the SSA-Tb-ATP ICPs to perform cellular imaging of ALP in both hepatocellular carcinoma cells (HepG2) and normal liver cells (LO2), representing a significant advancement in ALP detection and imaging. The simplicity of the synthesis and high sensitivity make this probe a promising tool for early diagnosis of hepatocellular carcinoma in clinical settings and environment analysis.

Ratiometric fluorescent detection of total phosphates in frozen shrimp samples using catalytic active Zr(IV) modified gold nanoclusters

Phosphate salts are important food additives in a variety of foods. In this study, the Zr(IV) modified gold nanoclusters (Au NCs) were prepared for ratiometric fluorescent sensing of phosphate additives in seafood samples. Compared with bare Au NCs, the synthesized Zr(IV)/Au NCs showed stronger orange fluorescence at 610 nm. On the other hand, the Zr(IV)/Au NCs retained the phosphatase-like activity of Zr(IV) ions and could catalyze the hydrolysis of fluorescent substrate 4-methylumbelliferyl phosphate to produce blue emission at 450 nm. The addition of phosphate salts could effectively inhibit the catalytic activity of Zr(IV)/Au NCs, resulting the fluorescence decrease at 450 nm. However, the fluorescence at 610 nm almost unchanged upon the addition of phosphates. Based on this finding, the ratiometric detection of phosphates using the fluorescence intensity ratio (I₄₅₀/I₆₁₀) was demonstrated. The method has been further applied for sensing total phosphates in frozen shrimp samples with satisfactory results.

Dual-ligand two-dimensional terbium-organic frameworks nanosheets for ratiometric fluorescence detection of phosphate

Here, we reported a ratiometric fluorescence strategy for the detection of phosphate (Pi) in artificial wetland water. The strategy was based on dual-ligand two-dimensional terbium-organic frameworks nanosheets (2D Tb-NB MOFs). 2D Tb-NB MOFs were prepared through blending 5-boronoisophthalic acid (5-bop), 2-aminoterephthalic acid (NH₂-BDC) and Tb³⁺ ions at room temperature in the presence of triethylamine (TEA). The dual-ligand strategy realized dual emission originated from ligand NH₂-BDC and Tb³⁺ ions at 424 and 544 nm, respectively. Pi could compete with ligands to coordinate Tb³⁺ due to the strong binding ability between Pi and Tb³⁺, resulting in structural destruction of 2D Tb-NB MOFs, so static quenching and antenna effect between ligands and metal ions were interrupted, and emission at 424 nm was enhanced and emission at 544 nm was weakened. This novel probe had excellent linearity with Pi concentrations from 1 to 50 μmol/L; the detection limit was 0.16 μmol/L. This work revealed that mixed ligands improved sensing efficiency of MOFs by enhancing the sensitivity of the coordination between the analyte and MOFs.

Gelatinous lanthanide coordination polymer with aggregation-enhanced antenna effect for ratiometric detection of endogenous alkaline phosphatase

Aggregation-induced emission (AIE) and antenna effect (AE) are two significant behaviors that have attracted increasing attention. However, it is challenging to achieve the synergistic effect of AIE and AE in luminescent materials for more extensive applications. Here, four gelatinous Ln³⁺ coordination polymers (Ln-CPs) are synthesized by self-assembly of ciprofloxacin (CIP), adenosine monophosphate (AMP), and Ln³⁺ ions in aqueous medium. Encouragingly, a remarkable increase in the characteristic fluorescence of Ln³⁺ and a significant decrease in CIP are observed along with increasing concentration of Ln-CPs, which is attributed to the large aggregates formed by self-assembly that strictly constrain the intramolecular motions of antenna ligands, thereby achieving the aggregation-enhanced AE. More meaningfully, Eu-CP not only shows a rice-like morphology at high aggregation state, but also provides an opportunity for the selective detection of alkaline phosphatase (ALP). A new flower-like polymer is formed upon incubating Eu-CP with ALP, accompanied by the fluorescence quenching of Eu³⁺ and recovery of CIP, a ratiometric determination of ALP in the range of 0.1-6.0 U·L^-1 is thus achieved. Additionally, ALP assay in human serum and bioimaging in living cells have been successfully performed. This research opens a new horizon for the fabrication of Ln³⁺-based luminescent materials with promising applications.

Lanthanide ternary complex as a fluorescent probe for highly sensitive and selective detection of copper ions based on selective recognition and photoinduced electron transfer

Copper ions have a very important role in human health, industrial and agricultural production. Herein, lanthanide ternary complex of 2,6-pyridinedicarboxylic acid (DPA)-Eu³⁺-polyethyleneimine (PEI) as a fluorescent probe was thus fabricated for highly sensitive and selective detection of copper ions. PEI itself is non-fluorescent, the PEI-Eu³⁺complex is also non-fluorescent, and PEI has specific recognition to copper ions due to its higher affinity ability to copper ion than other metal ions. It was found that Cu²⁺ ions cannot quench the characteristic fluorescence of Eu³⁺ in the DPA-Eu³⁺ system, while in the DPA-Eu³⁺-PEI system, Cu²⁺ ions can greatly quench the characteristic fluorescence of Eu³⁺ due to photoinduced electron transfer (PET). The luminescent and quenching mechanism was also discussed in detail. The DPA-Eu³⁺-PEI probe not only has high sensitivity and selectivity, but also has very rapid fluorescence response and the response time is only 1 min. A good linear relationship between the fluorescence ratios of F₀/F and the concentrations of Cu²⁺ was obtained in the range of 0.02 ∼ 10.0 μM (R² = 0.998), and the limit of detection (LOD) is 8.0 nM. The probe was successfully applied for the detection of Cu²⁺ ions in the lake and river water samples, wastewater and urine samples. This work may provide a new strategy for fabricating simple and effective fluorescence probe and a promising application for the rapid and on-site detection in environmental monitoring and biological fluids.

Kill two birds with one stone: Ratiometric sensing of phosphate via a single-component probe with fluorescence-scattering dual-signal response behavior

Ratiometric fluorescence sensors gain stronger anti-interference ability via self-calibration. Nevertheless, ratiometric analysis of phosphate (Pi) still faces problems such as complicated construction process of dual emission probes and possible interferences from outputting mono-category fluorescent signal. Herein, we propose a "kill two birds with one stone" strategy to address these challenges, by simply introducing a single-component probe, porphyrin paddlewheel framework-3 (PPF-3) nanosheets without modification, encapsulation or complex, to integrate fluorescence (FL)-second-order scattering (SOS) dual-signal for ratiometric detection of Pi. PPF-3 nanosheets are constructed by coordination of Co²⁺ with 5,10,15,20-tetrakis(4-carboxyl-phenyl)-porphyrin (TCPP) ligands, displaying weak FL and strong SOS, two different and independent signals. In the response system to Pi, Co²⁺ and TCPP serve as the recognition element and signal unit, respectively. After interacting with Pi, the high affinity for Co²⁺ makes Pi snatch Co²⁺ from the PPF-3 nanosheets, causing their structure disassembly (SOS decrease) and TCPP release (FL increase). Finally, the FL-SOS ratiometric platform is successfully employed to access Pi in real water samples. Synchronous collection of FL and SOS from the single-component probe provides a simpler and more efficient way on ratiometric sensor design as well as a new useful technique for monitoring target-induced aggregation and disaggregation behavior.

Detecting phosphate using lysine-sensitized terbium coordination polymer nanoparticles as ratiometric luminescence probes

Probes for detecting phosphate ions (Pi) are required for environmental monitoring and to protect human health. Here, novel ratiometric luminescent lanthanide coordination polymer nanoparticles (CPNs) were successfully prepared and used to selectively and sensitively detect Pi. The nanoparticles were prepared from adenosine monophosphate (AMP) and Tb³⁺, and lysine (Lys) was used as a sensitizer (through the antenna effect) to switch on Tb³⁺ luminescence at 488 and 544 nm while Lys luminescence at 375 nm was quenched because of energy transfer from Lys to Tb³⁺. The complex involved is here labeled AMP-Tb/Lys. Pi destroyed the AMP-Tb/Lys CPNs and therefore decreased the AMP-Tb/Lys luminescence intensity at 544 nm and increased the luminescence intensity at 375 nm at an excitation wavelength of 290 nm, meaning ratiometric luminescence detection was possible. The ratio between the luminescence intensities at 544 and 375 nm (I₅₄₄/I₃₇₅) was strongly associated with the Pi concentration between 0.1 and 6.0 μM, and the detection limit was 0.08 μM. The dual-emission reverse-change ratio luminescence sensing method can exclude environmental effects, so the proposed assay was found to be very selective. The method was successfully used to detect Pi in real water samples, and acceptable recoveries were found, suggesting that the method could be used in practice to detect Pi in water samples.

A Highly Sensitive and Selective Nano-Fluorescent Probe for Ratiometric and Visual Detection of Oxytetracycline Benefiting from Dual Roles of Nitrogen-Doped Carbon Dots

The specific detection of oxytetracycline (OTC) residues is significant for food safety and environmental monitoring. However, rapid specific determination of OTC from various tetracyclines is still challenging due to their similar chemical structures. Here, nitrogen-doped carbon dots (NCDs) with excitation and pH-dependent optical properties and a high-fluorescence quantum yield were successfully synthesized, which were directly employed to fabricate a dual-response fluorescence probe by self-assembly with Eu³⁺ (NCDs/Eu³⁺) for the ratiometric determination of OTC. The addition of OTC into the probe greatly enhances the characteristic emission of Eu³⁺ due to the "antenna effect", and the incorporation of NCDs into the probe further improves the Eu³⁺ fluorescence by remarkably weakening the quenching effect caused by H₂O molecules and efficiently shortening the distance of energy transfer from OTC to Eu³⁺. Meanwhile, the fluorescence of NCDs apparently decreases due to aggregation-caused quenching. The results demonstrate that a ratiometric detection of OTC (0.1-25 µM) with a detection limit of 29 nM based on the double response signals is achieved. Additionally, visual semi-quantitative assay of OTC can be realized with the naked eye under a 365 nm UV lamp according to the fluorescence color change of the as-fabricated probe. This probe exhibits acceptable specificity and anti-interference for OTC assay, holding promise for the fast detection of OTC in real water and milk samples.

Multicolor luminescent material based on interaction between TiNbO5- nanosheets and lanthanide ions for visualization of pH change in inorganic gel electrolyte

Layered nanosheet materials showing a drastic luminescence change in response to changes in proton concentration (pH) were prepared by sandwiching Eu³⁺ and Tb³⁺ cations with anionic TiNbO₅^- nanosheets using electrostatic interaction. Each trivalent lanthanide ion showed a different response to pH change: a strong red emission from Eu³⁺ was observed at low proton concentrations (pH: 13) and a green emission from Tb³⁺ was dominant at high proton concentrations (pH: 1). The photoluminescence intensity was determined by the balance between the photocatalytic activity of TiNbO₅^- nanosheets and energy transfer from the host layer to the guest lanthanide ions. Moreover, the trivalent lanthanide/TiNbO₅^- nanosheet hybrid formed a gel-like solid in aqueous solution, which functioned as an inorganic gel electrolyte when mixed with Na₂SO₄. The multicolor luminescence (red-yellow-green) of the lanthanide/TiNbO₅^- nanosheet hybrid enabled direct visualization of the diffusion of protons in an inorganic gel electrolyte during water electrolysis.

A smartphone-integrated light-up lanthanide fluorescent probe for the visual and ratiometric detection of total phosphorus in human urine and environmental water samples

Phosphate (Pi) plays an essential role in aquatic ecosystems as well as in physiological processes. Here, a dual-emission probe for the sensitive, specific and visual analysis of Pi is fabricated by coordinating Eu³⁺ with luminol and 2,6-pyridinedicarboxylic acid (DPA). Pi can significantly enhance the characteristic fluorescence of Eu³⁺ at 615 nm by promoting energy transfer from DPA to Eu³⁺ and reducing the quenching effect of water molecule, luminol with inherent emission at 423 nm further enhances the Eu³⁺ fluorescence. Accordingly, ratiometric detection of Pi can be achieved with the fluorescence ratio F₆₁₅/F₄₂₃ as a function of Pi concentration. Linearity between F₆₁₅/F₄₂₃ and Pi concentration in the range of 0.1-25 μM is shown, and the limit of detection (LOD, 3σ/K) for Pi is 0.027 µM. In addition, a continuous change in the fluorescence color of the probe from blue to red is observed with increasing Pi concentration under a UV lamp, and a smartphone-based visual method is used for the convenient and effective semi-quantitative determination of Pi. The dual-emission probe has been successfully applied to ratiometric and visual analysis of Pi in human urine and environmental water samples, and adequate results are obtained.

A europium(III)-based nanooptode for bicarbonate sensing - a multicomponent approach to sensor materials

Lanthanide luminescence contains detailed chemical information and can be used to report on several chemical analytes. This has been exploited through elaborate synthesis of responsive lanthanide complexes. Here, we report on a less elaborate approach and assemble four different nanooptodes. Europium(III) is used to sense the bicarbonate concentration. The signal from the optode was enhanced 100 times using antenna chromophore and the response was modulated by the addition of lipophilic cations.

Luminescent Lanthanide Probes for Inorganic and Organic Phosphates

Inorganic and organic phosphates-including orthophosphate, nucleotides, and DNA-are some of the most fundamental anions in cellular biology, regulating numerous processes of both medical and environmental significance. The characteristic long lifetimes of emitting lanthanides, including the brighter europium(III) and terbium(III), make them ideally suited for the development of molecular probes for the detection of phosphates directly in complex aqueous media. Moreover, given their high oxophilicity and the exquisite sensitivity of their quantum yields to their hydration number, those luminescent lanthanides are perfect for the detection of phosphates. Herein we discuss the principles that have guided the recent developments of molecular probes selective for inorganic or organic phosphates and how these lanthanide complexes facilitate the study of numerous biological processes.

Molecular Probes, Chemosensors, and Nanosensors for Optical Detection of Biorelevant Molecules and Ions in Aqueous Media and Biofluids

Synthetic molecular probes, chemosensors, and nanosensors used in combination with innovative assay protocols hold great potential for the development of robust, low-cost, and fast-responding sensors that are applicable in biofluids (urine, blood, and saliva). Particularly, the development of sensors for metabolites, neurotransmitters, drugs, and inorganic ions is highly desirable due to a lack of suitable biosensors. In addition, the monitoring and analysis of metabolic and signaling networks in cells and organisms by optical probes and chemosensors is becoming increasingly important in molecular biology and medicine. Thus, new perspectives for personalized diagnostics, theranostics, and biochemical/medical research will be unlocked when standing limitations of artificial binders and receptors are overcome. In this review, we survey synthetic sensing systems that have promising (future) application potential for the detection of small molecules, cations, and anions in aqueous media and biofluids. Special attention was given to sensing systems that provide a readily measurable optical signal through dynamic covalent chemistry, supramolecular host-guest interactions, or nanoparticles featuring plasmonic effects. This review shall also enable the reader to evaluate the current performance of molecular probes, chemosensors, and nanosensors in terms of sensitivity and selectivity with respect to practical requirement, and thereby inspiring new ideas for the development of further advanced systems.

Metal-Organic Frameworks Encapsulating Carbon Dots Enable Fast Speciation of Mono- and Divalent Copper

Copper is an essential element to play significant roles in human health associated to the strong redox properties of Cu(I) and Cu(II). The concurrent monitoring of copper species in biological matrixes is highly desired. Herein, a dual-channel fluorescence nanoprobe was designed for the speciation of mono- and divalent copper by conjugating carbon dots (CDs) with Eu-based metal-organic frameworks (Eu-MOFs). The obtained Eu-MOFs@CD nanoprobe exhibits fluorescence at λ_ex/λ_em = 380/454 nm from CDs and λ_ex/λ_em = 275/615 nm from Eu-MOFs. Bathocuproine disulfonate (BCS) specifically chelates Cu⁺ to produce a BCS-Cu⁺ adduct with absorption at 480 nm, which quenches the fluorescence of CDs at 454 nm due to the inner filter effect. On the other hand, Cu²⁺ quenches the fluorescence of Eu-MOFs due to the replacement of Eu³⁺ by Cu²⁺. Thus, Eu-MOFs@CDs enable extremely fast detection of Cu⁺ and Cu²⁺ within 1 min. Furthermore, the nanoprobe is demonstrated by monitoring the variation of Cu⁺ and Cu²⁺ in the degradation process of copper nanoparticles and Cu-based MOFs.

On the importance of π-stacking interactions in the complexes of copper and zinc bearing pyridine-2,6-dicarboxylic acid N-oxide and N-donor auxiliary ligands

Using N- and O-donor ligands in a mixed-ligand system, three new coordination complexes have been X-ray characterized, exhibiting strong π–π stacking interactions.

Smart intercalation and coordination strategy to construct stable ratiometric fluorescence nanoprobes for the detection of anthrax biomarker

L@Mg-Al-Ln-LDHs (Ln = Tb, Eu) constructed by the intercalation coordination strategy exhibited a strong and stable fluorescence reference signal and achieved reliable ratiometric detection of DPA in complex environments and actual spores.

Programmable-Printing Paper-Based Device with a MoS2 NP and Gmp/Eu-Cit Fluorescence Couple for Ratiometric Tetracycline Analysis in Various Natural Samples

Paper-based fluorescence devices, with smartphone aids, bring considerable operation convenience for tetracycline (TC) sensing. Nevertheless, they must meet the challenge in real determination against complicated backgrounds. Considering that, we present a programmable-printing paper-based device and then apply it to TC determination for various natural samples. MoS₂ NPs and Gmp/Eu-Cit are synthetized as composite probes. A static quenching process is found with MoS₂ NP fluorescence at 430 nm, while significant magnification of Gmp/Eu-Cit emission is obtained at 617 nm, establishing a valuable ratiometric indicator. Remarkably, two-stage programmable printing maximizes the proposed sensing capability. A transitive device, containing a gradually changing amount of a certain probe, is prepared to sense TC. With a homemade smartphone application and 3D-printed measurement chamber, the corresponding signals are examined to explore optimal setups. These setups are automatically processed to prepare the final-version device, not requiring manual operations. Benefitting from this interesting feature, the proposed device gains many rewards in performances. It effectively senses TC in a wide range from 12.7 nM to 80 μM and simultaneously provides naked eye-legible signals and smartphone-based readouts with confident selectivity and stability. This device is consequently applied for various samples of soil, river water, milk, and serum and meets well with HPLC-MS and recovery tests.

Terbium doping of graphitic carbon nitride endows a highly sensitive ratiometric fluorescence assay of alkaline phosphatase

Terbium doped graphitic carbon nitride (g-C₃N₄:Tb) gives rise to two exceptional emissions at λ_ex/λ_em = 290/490 nm and 290/546 nm, with extremely narrow peak widths of FWHM < 12 nm as well as a large Stokes shift of >200 nm. The modification of g-C₃N₄:Tb with HOOC-PEG-COOH provides a ratiometric fluorescent probe which ensures highly sensitive detection of alkaline phosphatase (ALP) activity based on the inner filter effect (IFE).

A dual-signal fluorescent probe for detection of acid phosphatase

Acid phosphatase has become a significant indicator of prognostic and medical diagnosis, and its dysfunction may lead to a series of diseases. A novel dual-signal fluorescence method for acid phosphatase detection based on europium polymer (europium-pyridine dicarboxylicacid-adenine) and pyridoxal phosphate (PLP) was proposed. PLP coordinated with europium polymer via Eu³⁺ and P-O bonds, and the fluorescence of europium polymer was quenched due to the photoinduced electron transfer (PET) effect between aldehyde and europium polymer. Upon addition of acid phosphatase, the PLP was transformed to phosphate (Pi) and pyridoxal (PL). The PL was released from the surface of europium polymer, and the blue emission was enhanced due to the formation of internal hemiacetal, while the fluorescence of europium polymer recovered. The blue (PL) and red emission (Eu³⁺) were positively correlated with acid phosphatase activity; thus the sensitive assay of acid phosphatase was effectively achieved. The two signals were applied to determine the acid phosphatase with limits of detection (LOD) of 0.04 mU/mL and 0.38 mU/mL, and the linear ranges were 0.13-5.00 mU/mL and 1.25-20.00 mU/mL, respectively. The probe can be used to trace the acid phosphatase in biological systems and holds promise for use in clinical diagnosis and early prevention.

Luminescence response mode and chemical sensing mechanism for lanthanide-functionalized metal–organic framework hybrids

This comprehensive review systematically summarizes the luminescence response mode and chemical sensing mechanism for lanthanide-functionalized MOF hybrids (abbreviated as LnFMOFH).