Direct Tellurization of Pt to Synthesize 2D PtTe2 for High-Performance Broadband Photodetectors and NIR Image Sensors

Van der Waals mid-wavelength infrared detector linear array for room temperature passive imaging

Passive imaging for mid-wave infrared (MWIR) is resistant to atmospheric pollutants, guaranteeing image clarity and accuracy. Arrayed photodetectors can simultaneously perform radiation sensing to improve efficiency. Room temperature van der Waals (vdWs) photodetectors without lattice matching have evolved rapidly with optimized stacking methods, primarily for single-pixel devices. The urgent need to implement arrayed devices aligns with practical demands. Here, we present an 8 by 1 black phosphorus/molybdenum sulfide (BP/MoS2) vdWs photodetector linear array with a fill-factor of ~77%, fabricated using a temperature-assisted sloping transfer method. The flat interface and uniform thickness facilitate carrier transport and minimize pixel nonuniformities, showing an average peak detectivity (D*) of 2.34 × 109 cm·Hz1/2·W-1 in the mid-wave infrared region. Compared to a single pixel, push-broom scanning passive imaging is eight times more efficient and further enhanced through mean filtering and fast Fourier transform filtering for strip noise correction. Our study offers guidance on vdWs arrayed devices for engineering applications.

Anisotropic phonon dynamics in Dirac semimetal PtTe2 thin films enabled by helicity-dependent ultrafast light excitation

Coherent phonons have aroused considerable attention in condensed matter physics owing to their extraordinary capacity of reflecting and controlling the physical properties of matter. However, the investigation on the interaction between coherent phonons and other microscopic particles on the ultrafast timescale within topological systems continues to be an active and unresolved area. Here, we show the energy transfer of coherent optical phonons (COP) in Dirac semimetal PtTe2 thin films using ultrafast optical pump-probe spectroscopy. Specifically, the helicity-dependent light-driven anisotropic COP signals disclose their direct connection with the light-excited anisotropic spin-polarized electrons via an angular momentum transfer. Furthermore, we observe the notable decreases in the COP oscillation frequency and the decay rate with increasing temperatures due to the anharmonic phonon-phonon scattering and electron-phonon scattering in the COP dissipation process, respectively. Our work paves the way for uncovering the coherent phonons in Dirac semimetals for the potential applications in optoelectronics and opto-spintronics.

Terahertz and Infrared Plasmon Polaritons in PtTe2 Type-II Dirac Topological Semimetal

Surface plasmon polaritons (SPPs) are electromagnetic excitations existing at the interface between a metal and a dielectric. SPPs provide a promising path in nanophotonic devices for light manipulation at the micro and nanoscale with applications in optoelectronics, biomedicine, and energy harvesting. Recently, SPPs are extended to unconventional materials like graphene, transparent oxides, superconductors, and topological systems characterized by linearly dispersive electronic bands. In this respect, 3D Dirac and Weyl semimetals offer a promising frontier for infrared (IR) and terahertz (THz) radiation tuning by topologically-protected SPPs. In this work, the THz-IR optical response of platinum ditelluride (PtTe2) type-II Dirac topological semimetal films grown on Si substrates is investigated. SPPs generated on microscale ribbon arrays of PtTe2 are detected in the far-field limit, finding an excellent agreement among measurements, theoretical models, and electromagnetic simulation data. The far-field measurements are further supported by near-field IR data which indicate a strong electric field enhancement due to the SPP excitation near the ribbon edges. The present findings indicate that the PtTe2 ribbon array appears an ideal active layout for geometrically tunable SPPs thus inspiring a new fashion of optically tunable materials in the technologically demanding THz and IR spectrum.

Wafer-Scale Synthesis of Highly Oriented 2D Topological Semimetal PtTe2 via Tellurization

Platinum ditelluride (1T-PtTe2) is a two-dimensional (2D) topological semimetal with a distinctive band structure and flexibility of van der Waals integration as a promising candidate for future electronics and spintronics. Although the synthesis of large-scale, uniform, and highly crystalline films of 2D semimetals system is a prerequisite for device application, the synthetic methods meeting these criteria are still lacking. Here, we introduce an approach to synthesize highly oriented 2D topological semimetal PtTe2 using a thermally assisted conversion called tellurization, which is a cost-efficient method compared to the other epitaxial deposition methods. We demonstrate that achieving highly crystalline 1T-PtTe2 using tellurization is not dependent on epitaxy but rather relies on two critical factors: (i) the crystallinity of the predeposited platinum (Pt) film and (ii) the surface coverage ratio of the Pt film considering lateral lattice expansion during transformation. By optimizing the surface coverage ratio of the epitaxial Pt film, we successfully obtained 2 in. wafer-scale uniformity without in-plane misalignment between antiparallelly oriented domains. The electronic band structure of 2D topological PtTe2 is clearly resolved in momentum space, and we observed an interesting 6-fold gapped Dirac cone at the Fermi surface. Furthermore, ultrahigh electrical conductivity down to ∼3.8 nm, which is consistent with that of single crystal PtTe2, was observed, proving its ultralow defect density.

Progress in Advanced Infrared Optoelectronic Sensors

Infrared optoelectronic sensors have attracted considerable research interest over the past few decades due to their wide-ranging applications in military, healthcare, environmental monitoring, industrial inspection, and human-computer interaction systems. A comprehensive understanding of infrared optoelectronic sensors is of great importance for achieving their future optimization. This paper comprehensively reviews the recent advancements in infrared optoelectronic sensors. Firstly, their working mechanisms are elucidated. Then, the key metrics for evaluating an infrared optoelectronic sensor are introduced. Subsequently, an overview of promising materials and nanostructures for high-performance infrared optoelectronic sensors, along with the performances of state-of-the-art devices, is presented. Finally, the challenges facing infrared optoelectronic sensors are posed, and some perspectives for the optimization of infrared optoelectronic sensors are discussed, thereby paving the way for the development of future infrared optoelectronic sensors.

Two-Step Conversion of Metal and Metal Oxide Precursor Films to 2D Transition Metal Dichalcogenides and Heterostructures

The widely studied class of two-dimensional (2D) materials known as transition metal dichalcogenides (TMDs) are now well-poised to be employed in real-world applications ranging from electronic logic and memory devices to gas and biological sensors. Several scalable thin film synthesis techniques have demonstrated nanoscale control of TMD material thickness, morphology, structure, and chemistry and correlated these properties with high-performing, application-specific device metrics. In this review, the particularly versatile two-step conversion (2SC) method of TMD film synthesis is highlighted. The 2SC technique relies on deposition of a solid metal or metal oxide precursor material, followed by a reaction with a chalcogen vapor at an elevated temperature, converting the precursor film to a crystalline TMD. Herein, the variables at each step of the 2SC process including the impact of the precursor film material and deposition technique, the influence of gas composition and temperature during conversion, as well as other factors controlling high-quality 2D TMD synthesis are considered. The specific advantages of the 2SC approach including deposition on diverse substrates, low-temperature processing, orientation control, and heterostructure synthesis, among others, are featured. Finally, emergent opportunities that take advantage of the 2SC approach are discussed to include next-generation electronics, sensing, and optoelectronic devices, as well as catalysis for energy-related applications.

Uncooled Broadband Photodetection via Light Trapping in Conformal PtTe2-Silicon Nanopillar Heterostructures

Dirac semimetals have demonstrated significant attraction in the field of optoelectronics due to their unique bandgap structure and high carrier mobility. Combining them with classical semiconductor materials to form heterojunctions enables broadband optoelectronic conversion at room temperature. However, the low light absorption of layered Dirac semimetals substantially limits the device's responsivity in the infrared band. Herein, a three-dimensional (3D) heterostructure, composed of silicon nanopillars (SiNPs) and a conformal PtTe2 film, is proposed and demonstrated to enhance the photoresponsivity for uncooled broadband detection. The light trapping effect in the 3D heterostructure efficiently promotes the interaction between light and PtTe2, while also enhancing the light absorption efficiency of silicon, which enables the enhancement of the device responsivity across a broadband spectrum. Experimentally, the PtTe2-SiNPs heterojunction device demonstrates excellent photoelectric conversion behavior across the visible, near-infrared, and long-wave infrared (LWIR) bands, with its responsivity demonstrating an order-of-magnitude improvement compared to the counterparts with planar silicon heterojunctions. Under 11 μm laser irradiation, the noise equivalent power (NEP) can reach 1.76 nW·Hz-1/2 (@1 kHz). These findings offer a strategic approach to the design and fabrication of high-performance broadband photodetectors based on Dirac semimetals.

Highly Efficient Spintronic Terahertz Emitter Utilizing a Large Spin Hall Conductivity of Type-II Dirac Semimetal PtTe2

The remarkable spin-charge interconversion ability of transition metal dichalcogenides (TMDs) makes them promising candidates for spintronic applications. Nevertheless, their potential as spintronic terahertz (THz) emitters (STEs) remains constrained mainly due to their sizable resistivity and low spin Hall conductivity (SHC), which consequently result in modest THz emission. In this work, the TMD PtTe2, a type-II Dirac semimetal is effectively utilized to develop efficient STEs. This high efficiency primarily results from the large SHC of PtTe2, stemming from its low resistivity and significant spin-to-charge conversion efficiency, attributed to surface states and the local Rashba effect in addition to the inverse spin Hall effect. Remarkably, the peak THz emission from PtTe2/Co-STE exceeds that of Pt/Co-STE by ∼15% and is nearly double that of a similarly thick Pt/Co-STE. The efficient THz emission in the PtTe2/Co heterostructure opens new possibilities for utilizing the semimetal TMDs for developing THz emitters.

Optical Enhancement of Indirect Bandgap 2D Transition Metal Dichalcogenides for Multi-Functional Optoelectronic Sensors

The unique electrical and optical properties of transition metal dichalcogenides (TMDs) make them attractive nanomaterials for optoelectronic applications, especially optical sensors. However, the optical characteristics of these materials are dependent on the number of layers. Monolayer TMDs have a direct bandgap that provides higher photoresponsivity compared to multilayer TMDs with an indirect bandgap. Nevertheless, multilayer TMDs are more appropriate for various photodetection applications due to their high carrier density, broad spectral response from UV to near-infrared, and ease of large-scale synthesis. Therefore, this review focuses on the modification of the optical properties of devices based on indirect bandgap TMDs and their emerging applications. Several successful developments in optical devices are examined, including band structure engineering, device structure optimization, and heterostructures. Furthermore, it introduces cutting-edge techniques and future directions for optoelectronic devices based on multilayer TMDs.

Uncooled Mid-Infrared Sensing Enabled by Chip-Integrated Low-Temperature-Grown 2D PdTe2 Dirac Semimetal

Next-generation mid-infrared (MIR) imaging chips demand free-cooling capability and high-level integration. The rising two-dimensional (2D) semimetals with excellent infrared (IR) photoresponses are compliant with these requirements. However, challenges remain in scalable growth and substrate-dependence for on-chip integration. Here, we demonstrate the inch-level 2D palladium ditelluride (PdTe2) Dirac semimetal using a low-temperature self-stitched epitaxy (SSE) approach. The low formation energy between two precursors facilitates low-temperature multiple-point nucleation (∼300 °C), growing up, and merging, resulting in self-stitching of PdTe2 domains into a continuous film, which is highly compatible with back-end-of-line (BEOL) technology. The uncooled on-chip PdTe2/Si Schottky junction-based photodetector exhibits an ultrabroadband photoresponse of up to 10.6 μm with a large specific detectivity. Furthermore, the highly integrated device array demonstrates high-resolution room-temperature imaging capability, and the device can serve as an optical data receiver for IR optical communication. This study paves the way toward low-temperature growth of 2D semimetals for uncooled MIR sensing.

Polarization-Sensitive, Self-Powered, and Broadband Semimetal MoTe2/MoS2 van der Waals Heterojunction for Photodetection and Imaging

The emerging type II Weyl semimetal 1T' MoTe2 as a promising material in polarization-sensitive photodetectors has aroused much attention due to its narrow bandgap and intrinsic in-plane anisotropic crystal structure. However, the semimetal properties lead to a large dark current and a low response. Herein, we demonstrate for the first time an all-2D semimetal MoTe2/MoS2 van der Waals (vdWs) heterojunction to improve the performance of the photodetectors and realize polarization-sensitive, self-powered, and broadband photodetection and imaging. Owing to the built-in electric field of the heterojunction, the device achieves a self-powered photoresponse ranging from 520 to 1550 nm. Under 915 nm light illumination, the device demonstrates outstanding performance, including a high responsivity of 79 mA/W, a specific detectivity of 1.2 × 1010 Jones, a fast rise/decay time of 180/202 μs, and a high on/off ratio of 1.3 × 10.3 Wavelength-dependent photocurrent anisotropic ratio is revealed to vary from 1.10 at 638 nm to 2.24 at 1550 nm. Furthermore, we demonstrate the polarization imaging capabilities of the device in scattering surroundings, and the DoLP and AoLP images achieve 78% and 112% contrast enhancement, respectively, compared to the S0. This work opens up new avenues to develop anisotropic semimetals heterojunction photodetectors for high-performance polarization-sensitive photodetection and next-generation polarized imaging.

2D Bi2Te3/Si heterostructure with high thermoelectric power factor enabled by interface regulated carrier injection

It has been highly demanded to optimize the charge carrier concentration in 2D Bi₂Te₃to achieve enhanced thermoelectric performance. This work reveals that, constructing 2D Bi₂Te₃/Si heterostructure with tuned interfacial electronic band structure can meet the above needs. When the work function in Si substrate is decreased from 4.6 to 4.06 eV, the charge carrier concentration and electron effective mass are increased simultaneously. Consequently, the electrical conductivity of 2D Bi₂Te₃on n⁺⁺-Si has reaches up to 1250 S·cm^-1, which is 90% higher than the counterpart on SiO₂/Si substrate, although the Seebeck coefficient in these two samples is around -103μV·K^-1. The resultant power factor of 2D Bi₂Te₃/n⁺⁺-Si heterostructure is 13.4μW·cm^-1·K^-2, which is one of the best values among similar studies ever reported. This work demonstrates a facile way to improve thermoelectric properties via interfacial engineering in a heterostructure.

Research Process on Photodetectors based on Group-10 Transition Metal Dichalcogenides

Rapidly evolving group-10 transition metal dichalcogenides (TMDCs) offer remarkable electronic, optical, and mechanical properties, making them promising candidates for advanced optoelectronic applications. Compared to most TMDCs semiconductors, group-10-TMDCs possess unique structures, narrow bandgap, and influential physical properties that motivate the development of broadband photodetectors, specifically infrared photodetectors. This review presents the latest developments in the fabrication of broadband photodetectors based on conventional 2D TMDCs. It mainly focuses on the recent developments in group-10 TMDCs from the perspective of the lattice structure and synthesis techniques. Recent progress in group-10 TMDCs and their heterostructures with different dimensionality of materials-based broadband photodetectors is provided. Moreover, this review accounts for the latest applications of group-10 TMDCs in the fields of nanoelectronics and optoelectronics. Finally, conclusions and outlooks are summarized to provide perspectives for next-generation broadband photodetectors based on group-10 TMDCs.

Resolving Interface Barrier Deviation from the Schottky-Mott Rule: A Mitigation Strategy via Engineering MoS2-Metal van der Waals Contact

The Schottky barrier (SB) in the ultraclean van der Waals contact between two-dimensional (2D) MoS₂ and three-dimensional (3D) indium (In) strikingly deviates from the Schottky-Mott limit (SML). Herein, on the basis of first-principles calculation, the origin of the SB deviation is brought to bear, as well as a strategy for mitigating the SB deviation. In light of the good agreement between the SB and the corrected SB by interface potential difference (ΔV) and Fermi -level shift (ΔE_F) based on the SML, the SB deviation is attributed to the combined effects of ΔV and ΔE_F. Furthermore, when a Au, Sc, or Ti thin film is coated on the back side of In, the SB deviation and the sum of ΔV and ΔE_F decrease similarly. Importantly, in the Ti coating situation, the SB is reduced to 0.12 eV, notably smaller than the value of 0.30 eV in the Au coating case. This interface engineering can be generalized to regulate the SB between a 2D semiconductor and a 3D alloy.

Phase-controlled van der Waals growth of wafer-scale 2D MoTe2 layers for integrated high-sensitivity broadband infrared photodetection

Being capable of sensing broadband infrared (IR) light is vitally important for wide-ranging applications from fundamental science to industrial purposes. Two-dimensional (2D) topological semimetals are being extensively explored for broadband IR detection due to their gapless electronic structure and the linear energy dispersion relation. However, the low charge separation efficiency, high noise level, and on-chip integration difficulty of these semimetals significantly hinder their further technological applications. Here, we demonstrate a facile thermal-assisted tellurization route for the van der Waals (vdW) growth of wafer-scale phase-controlled 2D MoTe₂ layers. Importantly, the type-II Weyl semimetal 1T'-MoTe₂ features a unique orthorhombic lattice structure with a broken inversion symmetry, which ensures efficient carrier transportation and thus reduces the carrier recombination. This characteristic is a key merit for the well-designed 1T'-MoTe₂/Si vertical Schottky junction photodetector to achieve excellent performance with an ultrabroadband detection range of up to 10.6 µm and a large room temperature specific detectivity of over 10⁸ Jones in the mid-infrared (MIR) range. Moreover, the large-area synthesis of 2D MoTe₂ layers enables the demonstration of high-resolution uncooled MIR imaging capability by using an integrated device array. This work provides a new approach to assembling uncooled IR photodetectors based on 2D materials.

Large Spin Hall Conductivity and Excellent Hydrogen Evolution Reaction Activity in Unconventional PtTe1.75 Monolayer

Two-dimensional (2D) materials have gained lots of attention due to the potential applications. In this work, we propose that based on first-principles calculations, the (2 × 2) patterned PtTe₂ monolayer with kagome lattice formed by the well-ordered Te vacancy (PtTe_1.75) hosts large and tunable spin Hall conductivity (SHC) and excellent hydrogen evolution reaction (HER) activity. The unconventional nature relies on the A1 @ 1b band representation of the highest valence band without spin-orbit coupling (SOC). The large SHC comes from the Rashba SOC in the noncentrosymmetric structure induced by the Te vacancy. Even though it has a metallic SOC band structure, the ℤ₂ invariant is well defined because of the existence of the direct bandgap and is computed to be nontrivial. The calculated SHC is as large as 1.25 × 10³ ℏ e (Ω cm)^-1 at the Fermi level (E_F ). By tuning the chemical potential from E_F - 0.3 to E_F + 0.3 eV, it varies rapidly and monotonically from -1.2 × 10³ to 3.1 × 1 0 3 ℏ e Ω   cm - 1 . In addition, we also find that the Te vacancy in the patterned monolayer can induce excellent HER activity. Our results not only offer a new idea to search 2D materials with large SHC, i.e., by introducing inversion-symmetry breaking vacancies in large SOC systems, but also provide a feasible system with tunable SHC (by applying gate voltage) and excellent HER activity.

Two-Dimensional Van Der Waals Topological Materials: Preparation, Properties, and Device Applications

Over the past decade, 2D van der Waals (vdW) topological materials (TMs), including topological insulators and topological semimetals, which combine atomically flat 2D layers and topologically nontrivial band structures, have attracted increasing attention in condensed-matter physics and materials science. These easily cleavable and integrated TMs provide the ideal platform for exploring topological physics in the 2D limit, where new physical phenomena may emerge, and represent a potential to control and investigate exotic properties and device applications in nanoscale topological phases. However, multifaced efforts are still necessary, which is the prerequisite for the practical application of 2D vdW TMs. Herein, this review focuses on the preparation, properties, and device applications of 2D vdW TMs. First, three common preparation strategies for 2D vdW TMs are summarized, including single crystal exfoliation, chemical vapor deposition, and molecular beam epitaxy. Second, the origin and regulation of various properties of 2D vdW TMs are introduced, involving electronic properties, transport properties, optoelectronic properties, thermoelectricity, ferroelectricity, and magnetism. Third, some device applications of 2D vdW TMs are presented, including field-effect transistors, memories, spintronic devices, and photodetectors. Finally, some significant challenges and opportunities for the practical application of 2D vdW TMs in 2D topological electronics are briefly addressed.

Wafer-Scale Synthesis of 2D Dirac Heterostructures for Self-Driven, Fast, Broadband Photodetectors

Type-II Dirac semimetal platinum ditelluride (PtTe₂) is a promising functional material for photodetectors because of its specially tilted Dirac cones, strong light absorption, and high carrier mobilities. The stack of two-dimensional (2D) Dirac heterostructures consisting of PtTe₂ and graphene could overcome the limit of detection range and response time occurring in the heterostructures of graphene and other low-mobility and large-gap transition metal dichalcogenides (TMDs). Here, we report an approach for achieving highly controllable, wafer-scale production of 2D Dirac heterostructures of PtTe₂/graphene with tunable thickness, variable size, and CMOS compatibility. More importantly, the optimized recipes achieve the exact stoichiometric ratio of 1:2 for Pt and Te elements without contaminating the underlayer graphene film. Because of the built-in electric field at the junction area, the photodetectors based on the PtTe₂/graphene heterostructure are self-driven with a broadband photodetection from 405 to 1850 nm. In particular, the photodetectors have a high responsivity of up to ∼0.52 AW^-1 (without bias) and a fast response time of ∼8.4 μs. Our work demonstrated an approach to synthesizing hybrid 2D Dirac heterostructures, which can be applied in the integration of on-chip, CMOS-compatible photodetectors with near-infrared detection, high sensitivity, and low energy consumption.

Emerging Two-Dimensional Tellurene and Tellurides for Broadband Photodetectors

As with all stylish 2D functional materials, tellurene and tellurides possessing excellent physical and chemical properties such as high environmental stability, tunable narrow bandgap, and lower thermal conductivity, have aroused the great interest of the researchers. These properties of such materials also form the basis for relatively newfangled scholarly fields involving advanced topics, especially for broadband photodetectors. Integrating the excellent properties of many 2D materials, tellurene/telluride-based photodetectors show great flexibility, higher frequency response or faster time response, high signal-to-noise ratio, and so on, which make them leading the frontier of photodetector research. To fully understand the excellent properties of tellurene/tellurides and their optoelectronic applications, the recent advances in tellurene/telluride-based photodetectors are maximally summarized. Benefiting from the solid research in this field, the challenges and opportunities of tellurene/tellurides for future optoelectronic applications are also discussed in this review, which might provide possibilities for the realization of state-of-the-art high-performance tellurene/telluride-based devices.

High-Performance Broadband Phototransistor Based on TeOx/IGTO Heterojunctions

Ultraviolet to infrared broadband spectral detection capability is a technological challenge for sensing materials being developed for high-performance photodetection. In this work, we stacked 9 nm-thick tellurium oxide (TeO_x) and 8 nm-thick InGaSnO (IGTO) into a heterostructure at a low temperature of 150 °C. The superior photoelectric characteristics we achieved benefit from the intrinsic optical absorption range (300-1500 nm) of the hexagonal tellurium (Te) phase in the TeO_x film, and photoinduced electrons are driven effectively by band alignment at the TeO_x/IGTO interface under illumination. A photosensor based on our optimized heterostructure exhibited a remarkable detectivity of 1.6 × 10¹³ Jones, a responsivity of 84 A/W, and a photosensitivity of 1 × 10⁵, along with an external quantum efficiency of 222% upon illumination by blue light (450 nm). Simultaneously, modest detection properties (responsivity: ∼31 A/W, detectivity: ∼6 × 10¹¹ Jones) for infrared irradiation at 970 nm demonstrate that this heterostructure can be employed as a broadband phototransistor. Furthermore, its low-temperature processability suggests that our proposed concept might be used to design array optoelectronic devices for wide band detection with high sensitivity, flexibility, and stability.

Unveiling the Mechanisms Ruling the Efficient Hydrogen Evolution Reaction with Mitrofanovite Pt3Te4

By means of electrocatalytic tests, surface-science techniques and density functional theory, we unveil the physicochemical mechanisms ruling the electrocatalytic activity of recently discovered mitrofanovite (Pt₃Te₄) mineral. Mitrofanovite represents a very promising electrocatalyst candidate for energy-related applications, with a reduction of costs by 47% compared to pure Pt and superior robustness to CO poisoning. We show that Pt₃Te₄ is a weak topological metal with the Z2 invariant, exhibiting electrical conductivity (∼4 × 10⁶ S/m) comparable with pure Pt. In hydrogen evolution reaction (HER), the electrode based on bulk Pt₃Te₄ shows a very small overpotential of 46 mV at 10 mA cm^-2 and a Tafel slope of 36-49 mV dec^-1 associated with the Volmer-Heyrovsky mechanism. The outstanding ambient stability of Pt₃Te₄ also provides durability of the electrode and long-term stability of its efficient catalytic performances.

Fabrication of 2D PdSe2/3D CdTe Mixed-Dimensional van der Waals Heterojunction for Broadband Infrared Detection

Room-temperature infrared photodetectors are in great demand because of their vitally important applications in the military and civilian fields, which has inspired intensive studies in recent decades. Here, we present the fabrication of a large-size PdSe₂/CdTe mixed-dimensional van der Waals (vdW) heterojunction for room-temperature infrared detection. Taking advantage of the wide light absorption of the multilayer PdSe₂, high-quality vdW interface, and unique mixed-dimensional device geometry, the present device is capable of detecting an ultrawide light up to long-wave infrared (LWIR) of 10.6 μm at room temperature. In addition, our photodetector exhibits a good capability to follow short pulse infrared signals with a quick response rate of 70 ns, a large responsivity of 324.7 mA/W, and a reasonable specific detectivity of 3.3 × 10¹² Jones. Significantly, the assembled photodetector is highly sensitive to a polarized infrared light signal with a decent polarization sensitivity of 4.4. More importantly, an outstanding LWIR imaging capability based on the PdSe₂/CdTe vdW heterojunction at nonrefrigeration condition is demonstrated. Our work paves a novel route for the design of highly polarization-sensitive, room-temperature infrared photodetectors.

Observation of Negative Terahertz Photoconductivity in Large Area Type-II Dirac Semimetal PtTe_{2}

As a newly emergent type-II Dirac semimetal, platinum telluride (PtTe_{2}) stands out from other two dimensional noble-transition-metal dichalcogenides for the unique band structure and novel physical properties, and has been studied extensively. However, the ultrafast response of low energy quasiparticle excitation in terahertz frequency remains nearly unexplored yet. Herein, we employ optical pump-terahertz probe (OPTP) spectroscopy to systematically study the photocarrier dynamics of PtTe_{2} thin films with varying pump fluence, temperature, and film thickness. Upon photoexcitation the terahertz photoconductivity (PC) of PtTe_{2} films shows abrupt increase initially, while the terahertz PC changes into negative value in a subpicosecond timescale, followed by a prolonged recovery process that lasted a few nanoseconds. The magnitude of both positive and negative terahertz PC response shows strongly pump fluence dependence. We assign the unusual negative terahertz PC to the formation of small polaron due to the strong electron-phonon (e-ph) coupling, which is further substantiated by temperature and film thickness dependent measurements. Moreover, our investigations give a subpicosecond timescale of simultaneous carrier cooling and polaron formation. The present study provides deep insights into the underlying dynamics evolution mechanisms of photocarrier in type-II Dirac semimetal upon photoexcitation, which is of crucial importance for designing PtTe_{2}-based optoelectronic devices.

Mid-Infrared Photodetection of Type-II Dirac Semimetal 1T-PtTe2 Grown by Molecular Beam Epitaxy

Mid-infrared (MIR) photodetection is of significance in civil and military applications because it shows superiority in absorbing the vibration of various molecules and covering atmospheric transmission windows. Recently, the PtTe₂, a typical type-II Dirac semimetal, has come under the spotlight due to its unique photodetection sensibility in the MIR region and robust stability in the atmosphere. Here, the high-quality and large-scale 1T-PtTe₂ thin films with air stability were grown by molecular beam epitaxy. Broadband photoresponse of the photodetectors of PtTe₂ from 420 nm to 10.7 μm shows high responsivity and detectivity of 0.2 mA W^-1 and 2.6 × 10⁷ Jones at 10.7 μm and 1.6 mA W^-1 and 2.2 × 10⁸ Jones at 4.7 μm under the atmosphere, respectively. Moreover, the photodetectors exhibit high sensitivity in visible and near-infrared regions (8.2 mA W^-1 at 650 nm and 15.6 mA W^-1 at 960 nm). The power- and polarization-dependent photoresponse measurements reveal the linear relationship of power photoresponse and obvious anisotropic photoresponse (the ratio of anisotropy ellipse is 8.3 at 10.7 μm), respectively. These results suggest that the PtTe₂ could be expected to be an advanced photodetection material for polarization angle-sensitive detection, infrared imaging, and photodetection from the visible to MIR range.