Tetraphenylpyrazine-Based Luminescent Metal-Organic Framework for Chemical Sensing of Carcinoids Biomarkers

Defect Engineering Strategy for Superior Integration of Metal-Organic Framework and Halide Perovskite as a Fluorescence Sensing Material

Combining halide perovskite quantum dots (QDs) and metal-organic frameworks (MOFs) material is challenging when the QDs' size is larger than the MOFs' nanopores. Here, we adopted a simple defect engineering approach to increase the size of zeolitic imidazolate framework 90 (ZIF-90)'s pores size to better load CH3NH3PbBr3 perovskite QDs. This defect structure effect can be easily achieved by adjusting the metal-to-ligand ratio throughout the ZIF-90 synthesis process. The QDs are then grown in the defective structure, resulting in a hybrid ZIF-90-perovskite (ZP) composite. The QDs in ZP composites occupied the gap of 10-18 nm defective ZIF-90 crystal and interestingly isolated the QDs with high stability in aqueous solution. We also investigated the relationship between defect engineering and fluorescence sensing, finding that the aqueous Cu2+ ion concentration was directly correlated to defective ZIF-90 and ZP composites. We also found that the role of the O-Cu coordination bonds and CH3NHCu+ species formation in the materials when they reacted with Cu2+ was responsible for this relationship. Finally, this strategy was successful in developing Cu2+ ion fluorescence sensing in water with better selectivity and sensitivity.

Pt(II) Tetrafacial Barrel with Aggregation-Induced Emission for Sensing

A new tetraphenylpyrazine-based tetraimidazole ligand (L) was synthesized and used for subcomponent self-assembly with cis-(tmeda)Pd(NO3)2 and cis-Pt(PEt3)2(OTf)2, leading to the formation of two tetrafacial barrels [Pd8L4(tmeda)8](NO3)16 (1) and [Pt8L4(PEt3)16](OTf)16 (2), respectively. Although ligand L is aggregation-induced emission (AIE) active, barrel 2 showed a magnificently higher AIE activity than ligand L, while 1 failed to retain the AIE properties of the ligand. Pd(II) barrel 1, undergoing an aggregation-caused quenching (ACQ) phenomenon, nullified the AIE activity of the ligand to be used in the photophysical application. The enhanced emission in the aggregated state of Pt(II) barrel 2 was used for the recognition of picric acid (PA), which is explosive in nature and one of the groundwater contaminants in landmine areas. The recognition of picric acid was found to be selective in comparison with that of other nitroaromatic compounds (NACs), which could be attributed to ground-state complex formation and resonance energy transfer between picric acid and barrel 2. The use of new AIE-active assembly 2 for selective detection of PA with a low detection limit is noteworthy.

Eu3+-Functionalized MOFs for the simple and rapid 5-Hydroxymethylfurfural determination in food

5-Hydroxymethylfurfural (5-HMF) is an important product of the Maillard reaction and can be used as a quality indicator of food. 5-HMF has been found in studies to be harmful to human health. In this study, a highly selective and anti-interference fluorescent sensor Eu@1 is constructed based on Eu3+-functionalized Hf-based MOF for monitoring 5-HMF in a variety of food products. Eu@1 shows high selectivity, low LOD (8.46 μM), fast response time, and repeatability for 5-HMF. More importantly, after adding 5-HMF to milk, honey and apple juice samples, the probe Eu@1 is proved to be successfully in sensing 5-HMF in the above food samples. Therefore, this study provides a dependable and efficient alternative for the detection of 5-HMF in food samples.

Stable Co(II)-based coordination polymer as fluorescence sensor for the discriminative sensing of biomarker methylmalonic acid

Three novel Co-based coordination polymers including {[Co(L)(μ3-O)1/3]2}n (1), {[Co(L)(bimb)]}n (2) and {[Co(L)(bimmb)1/2]}n (3) (H2L = 2,6-di(4-carboxylphenyl)-4-(4-(triazol-1-ylphenyl))pyridine), bimb = 1,4-bis(lmidazol) butane, bimmb = 1,4-bis(imidazole-1-ylmethyl)benzene) were successfully prepared under solvothermal conditions and characterized. Single-crystal X-ray diffraction analyses revealed that 1 possesses a 3D architecture composed of a trinuclear cluster [Co3N3(CO2)6(μ3-O)], 2 exhibits a 2D new topological framework with the point symbol (84·122)(8)2, whereas 3 shows a unique six-fold interpenetrated 3D framework with a (63·82·10)2(63)2(8) topology. Impressively, all of them can function as a highly selective and sensitive fluorescent sensor for the biomarker methylmalonic acid (MMA) via fluorescence quenching. The low detection limit, reusability and high anti-interference performance together make 1-3 become promising sensors for the practical detection of MMA. Furthermore, the successful application of MMA detection in urine sample was demonstrated, which may be a potential candidate for the further development of clinical diagnostic tools.

Cage-Based Metal-Organic Framework as an Artificial Energy Receptor for Highly Sensitive Detection of Serotonin

Artificial synthetic receptors toward functional biomolecules can serve as models to provide insights into understanding the high binding affinity of biological receptors to biomolecules for revealing their law of life activities. The exploration of serotonin receptors, which can guide drug design or count as diagnostic reagents for patients with carcinoid tumors, is of great value for clinical medicine but is highly challenging due to complex biological analysis. Herein, we report a cage-based metal-organic framework (NKU-67-Eu) as an artificial chemical receptor with well-matched energy levels for serotonin. The energy transfer back from the analyte to the framework enables NKU-67-Eu to recognize serotonin with excellent neurotransmitter selectivity in human plasma and an ultra-low limit of detection of 36 nM. Point-of-care visual detection is further realized by the colorimetry change of NKU-67-Eu toward serotonin with a smartphone camera.

Two Stable Cd-MOFs as Dual-Functional Materials with Luminescent Sensing of Antibiotics and Proton Conduction

Construction and investigation of dual-functional metal-organic frameworks (MOFs) with luminescent sensing and proton conduction provide widespread applications in clean energy and environmental monitoring fields. By selecting a phosphonic acid ligand 4-pyridyl-CH₂N(CH₂PO₃H₂)₂ (H₄L) and coligand 2,2'-biimidazole (H₂biim), two cadmium-based MOFs [Cd_1.5(HL)(H₂biim)_0.5] (1) and (H₄biim)_0.5·[Cd₂(L)(H₂biim)Cl] (2) with different structures and properties have been hydrothermally synthesized by controlling reaction temperature. Based on the excellent thermal and chemical stabilities, and good luminescent stabilities in water solution, 1 and 2 can serve as luminescent sensors of chloramphenicol (CAP) with different quenching constant (K_SV) values and detection limits (LODs) in water, simulated environmental system, and real fish water system. Meanwhile, different sensing effects and possible sensing mechanisms are analyzed in detail. Moreover, 1 and 2 can also serve as good proton-conducting materials. The proton conductivities can reach up to 1.41 × 10^-4 S cm^-1 for 1 and 1.02 × 10^-3 S cm^-1 for 2 at 368 K and 95% relative humidity (RH). Among them, 2 shows better luminescent sensing and proton conduction performance than 1, which indicates that different crystal structures have a great impact on the properties of MOFs. Through the discussion of the relationship between structures and properties in detail, the possible reasons for the differences in properties are obtained, which can provide theoretical guidance for the rational design of this kind of dual-functional MOFs in the future.

A new three-dimensional zinc(II) metal-organic framework as a fluorescence sensor for sensing the biomarker 3-nitrotyrosine

3-Nitrotyrosine (3-NT), an oxidative stress biomarker, is closely associated with various diseases. Thus, rapid and sensitive detection of 3-NT is of great significance for preventing and treating diseases. Herein, we reported a new 3D zinc-based metal-organic framework (Zn-MOF) [Zn(L)(HBTC)] (L = (E)-4,4'-(ethene-1,2-diyl)bis[(N-pyridin-3-yl)benzamide], H₃BTC = 1,3,5-benzenetricarboxylic acid), which was structurally characterized by single crystal X-ray diffraction, IR, PXRD and TG. The Zn-MOF can be used as a highly efficient fluorescence sensing material to provide a direct and low-cost method for the rapid detection of 3-NT and shows high sensitivity with a K_SV value of 6.596 × 10⁴ M^-1, a rapid luminescence response within 24 s, excellent selectivity, high anti-interference ability and good recyclability. It is the first example of a MOF being used to directly detect 3-NT as a luminescence sensor to our knowledge. The sensing mechanism of the Zn-MOF towards 3-NT is discussed in detail, which provides a basis for the rational design of MOF sensing materials and their application in biomarker detection.

Stable Zinc(II) Coordination Polymer as a Rapid and Highly Sensitive Fluorescence Sensor for the Discriminative Sensing of Biomarker 2-(2-Methoxyethoxy) Acetic Acid

A novel two-dimensional bilayer Zn-based luminescent coordination polymer (LCP) [Zn₂(μ₂-OH)(4-dptp)(3,4',5-bpt)] (LCP 1) [4-dptp = N³,N⁴-bis(pyridin-4-ylmethyl)thiophene-3,4-dicarboxamide and 3,4',5-H₃bpt = biphenyl-3,4',5-tricarboxylic acid] was successfully prepared under hydrothermal conditions and characterized by single-crystal X-ray diffraction, IR spectroscopy, powder X-ray diffraction, and luminescence spectroscopy. LCP 1 displayed excellent fluorescence-quenching efficiency toward a biomarker 2-(2-methoxyethoxy) acetic acid (MEAA) with a high K_sv (5.153 × 104 M^-1), a low limit of detection (0.244 μM), and a rapid response time (28 s). Additionally, LCP 1 can repeatedly detect MEAA at least eight times with excellent stability. The sensing mechanism was also carefully investigated through UV-vis absorption spectroscopy, density functional theory calculations, and fluorescence lifetime analysis.

Energy Transfer in Metal-Organic Frameworks for Fluorescence Sensing

The development of materials with outstanding performance for sensitive and selective detection of multiple analytes is essential for the development of human health and society. Luminescent metal-organic frameworks (LMOFs) have controllable surface and pore sizes and excellent optical properties. Therefore, a variety of LMOF-based sensors with diverse detection functions can be easily designed and applied. Furthermore, the introduction of energy transfer (ET) into LMOFs (ET-LMOFs) could provide a richer design concept and a much more sensitive and accurate sensing performance. In this review, we focus on the recent five years of advances in ET-LMOF-based sensing materials, with an emphasis on photochemical and photophysical mechanisms. We discuss in detail possible energy transfer processes within a MOF structure or between MOFs and guest materials. Finally, the possible sensing applications of the ET-LMOF-based sensors are highlighted.

Fabricated Metal-Organic Frameworks (MOFs) as luminescent and electrochemical biosensors for cancer biomarkers detection

In the health domain, a major challenge is the detection of diseases using rapid and cost-effective techniques. Most of the existing cancer detection methods show poor sensitivity and selectivity and are time consuming with high cost. To overcome this challenge, we analyzed porous fabricated metal-organic frameworks (MOFs) that have better structures and porosities for enhanced biomarker sensing. Here, we summarize the use of fabricated MOF luminescence and electrochemical sensors in devices for cancer biomarker detection. Various strategies of fabrication and the role of fabricated materials in sensing cancer biomarkers have been studied and described. The structural properties, sensing mechanisms, roles of noncovalent interactions, limits of detection, modeling, advantages, and limitations of MOF sensors have been well-discussed. The study presents an innovative technique to detect the cancer biomarkers by the use of luminescence and electrochemical MOF sensors. In addition, the potential association studies have been opening the way for personalized patient treatments and the development of new cancer-detecting devices.

Unearth the Luminescence Potential of Metal-Organic Frameworks: Adopting a Feasible Strategy to Fabricate One Ratiometric Fluorescence Sensor for Monitoring Both 1-Hydroxypyrene and Cu2

In this work, a novel luminescent hybrid material with double emission centers (Eu(TTA)_0.2@9-1-UMOF) is successfully prepared, adopting a feasible design strategy. Initially, the second ligand 1,2,4-benzenetricarboxylic acid (H₃BTC) is encapsulated based on a solid solution approach, which effectively improves the ligand-based emission intensity of the original LMOF and provides functional sites for introducing the second luminescent center; then, Eu³⁺ as the red emission source is loaded into the frameworks through a coordination post-synthetic modification method; finally, to balance the emission intensity at 613 nm (Eu³⁺) and 465 nm (1,4-naphthalenedicarboxylic acid (H₂NDC)), 2-thenoyltrifluoroacetone (TTA) as a powerful antenna is introduced. Given the outstanding luminescence properties and structural stability of Eu(TTA)_0.2@9-1-UMOF, it is further developed as a ratiometric sensor for detecting 1-hydroxypyrene (1-HP, the biomarker of polycyclic aromatic hydrocarbons (PAHs)) and Cu²⁺, which promotes the pre-diagnosis of human health. Notably, Eu(TTA)_0.2@9-1-UMOF exhibits excellent selective recognition ability for both 1-HP and Cu²⁺ with high sensitivity (LOD = 4.06 × 10^-6 mg/mL, 3.85 × 10^-7 mol/L, respectively) and fast response speed. In addition, Eu(TTA)_0.2@9-1-UMOF as a fluorescent probe shows great potential for the determination of 1-HP and Cu²⁺ in actual samples. More importantly, this work widens the road for the development of dual/multiple LMOF-based sensors for analytical applications.

Improvement of the fluorescent sensing biomarker 3-nitrotyrosine for a new luminescent coordination polymer by size regulation

A new 3D luminescent coordination polymer (LCP) 1 was synthesized for detecting biomarker 3-nitrotyrosine. By adjusting the reaction conditions, Nano-LCP 1 was synthesized, which has a more lower detection limit compared with LCP 1.

Switchable Ionic Transportation in the Nanochannels of the MOFs Triggered by Light and pH

The construction of a biomimetic ionic channel is of great significance for the fabrication of smart biodevices or logic circuit. Inspired by the selective permeability of the cell membrane toward bioions, a light-induced and pH-modulated artificial nanochannel is herein prepared by integrating the multistimuli-response molecule of carboxylated spiropyran (SP-COOH) into the frameworks of NU-1000 (Zr-based MOFs defined by Northwestern University). The loading density of the SP-COOH could reach as high as 7 wt % while keeping unchanged crystallinity and high porosity. Thanks to the precise matching of pore size of NU-1000 and molecular dimensions of SP-COOH, the loaded molecules could proceed free and reversible for isomerization between the hydrophilic and hydrophobic states. The ion-switchable characteristics of the channel are implemented by the amphiphilic change of the light-controlled gate molecule. Additionally, in the hydrophilic state, the channel presents reversible affinity toward cations or anions due to the reverse charge state induced by pH, thus constructing a pH-controlled subgate. Taking [Ru(NH₃)₆]³⁺ and [Fe(NH₃)]^3- as the model cation and anion, their redox peak currents occur as reversible change under different signal combinations of light and pH. Moreover, in accordance with the ionic selective permeability, several logic circuits/devices are designed to display the relationships between exogenous stimuli and ionic transportations in a computer language, prefiguring their wide application prospects in electronic devices and life sciences.

Dual-Functional Metal-Organic Framework for Luminescent Detection of Carcinoid Biomarkers and High Proton Conduction

It remains a challenge to exploit dual-functional metal-organic frameworks (MOFs) for applications, including luminescence detection and proton conduction. With the deliberate selection of the bifunctional organic ligand 5-sulfoisophthalic acid monosodium salt (NaH₂bts), and the phosphonic acid ligand N,N'-piperazine (bismethylenephosphonic acid; H₄L), a robust three-dimensional (3D) noninterpenetrating dual-functional MOF, [Tb(H₂L)(H₂bts)(H₂O)]·H₂O (1), has been synthesized hydrothermally. On the basis of the excellent thermal and chemical as well as superior luminescence stabilities in water and solutions with different pHs, 1 can serve as the simple, rapid, and highly selective and sensitive luminescence detection of the carcinoid biomarkers 5-hydroxytryptamine (HT) and its metabolite 5-hydroxyindole-3-acetic acid (HIAA) with detection limits of nanomolar magnitude in water and in simulated blood plasma and urine systems. Due to the change in the signals that could be readily differentiated by the naked eye under a UV lamp, a portable test paper has been developed. The probable quenching mechanisms are discussed in detail. In addition, a great number of hydrogen-bonding networks are formed among the uncoordinated carboxylic oxygen atoms, sulfonate oxygen atoms, protonated nitrogen atoms, and water molecules, which provide potential proton-hopping sites for proton conduction, leading to a maximum proton conductivity of 2.3 × 10^-4 S cm^-1 at 368 K and 95% relative humidity. The above results suggest that rationally designed dual-functional MOFs can open an avenue for the development of occupational diagnostic tools and alternative energy technology.

Zinc (II) and AIEgens: The "Clip Approach" for a Novel Fluorophore Family. A Review

Aggregation-induced emission (AIE) compounds display a photophysical phenomenon in which the aggregate state exhibits stronger emission than the isolated units. The common term of "AIEgens" was coined to describe compounds undergoing the AIE effect. Due to the recent interest in AIEgens, the search for novel hybrid organic-inorganic compounds with unique luminescence properties in the aggregate phase is a relevant goal. In this perspective, the abundant, inexpensive, and nontoxic d10 zinc cation offers unique opportunities for building AIE active fluorophores, sensing probes, and bioimaging tools. Considering the novelty of the topic, relevant examples collected in the last 5 years (2016-2021) through scientific production can be considered fully representative of the state-of-the-art. Starting from the simple phenomenological approach and considering different typological and chemical units and structures, we focused on zinc-based AIEgens offering synthetic novelty, research completeness, and relevant applications. A special section was devoted to Zn(II)-based AIEgens for living cell imaging as the novel technological frontier in biology and medicine.

Synthesis and photophysical properties of benzoxazolyl-imidazole and benzothiazolyl-imidazole conjugates

Materials that have higher fluorescence emission in the solid state than molecules in solution have recently been paid more attention by the scientific community due to their potential applications in various fields. In this work, we newly synthesized benzoxazolyl-imidazole and benzothiazolyl-imidazole conjugates, which show aggregation-induced emission (AIE) features in their solid and aggregate states. It was found that oxygen and sulfur substitutions can dramatically influence the molecular structures and polarities of the dyes, leading to different degrees of the AIE phenomenon. The benzothiazolyl-imidazole molecule has lower polarity compared to that of benzoxazolyl-imidazole; therefore, the dye bearing a benzothiazolyl group shows higher emission intensity and dual emission in aqueous solution. Theoretical calculation results suggest that the benzothiazolyl-imidazole molecules might have electrostatic interactions between sulfur and nitrogen atoms, explaining the experimental observations of lower critical aggregation concentration and photophysical properties both in solution and in the solid state. The theoretical calculations agree with the experimental data, thus demonstrating a potent strategy to gain a deep understanding of the structure–property relationships to design solid-state fluorescent materials.

The effect of heteroatoms on the structural and photophysical properties of donor-π-acceptor molecules, comprising imidazole and benzoxazolyl as well as imidazole and benzothiazolyl units, was investigated.