Scalable Mechanochemical Amorphization of Bimetallic Cu-Zn MOF-74 Catalyst for Selective CO2 Reduction Reaction to Methanol

Boosting Electrochemical CO2 Reduction on Copper-Based Metal-Organic Frameworks via Valence and Coordination Environment Modulation

Cu-based metal-organic frameworks (MOFs) have attracted much attention for electrocatalytic CO2 reduction to high value-added chemicals, but they still suffer from low selectivity and instability. Here, an associative design strategy for the valence and coordination environment of the metal node in Cu-based MOFs is employed to regulate the CO2 electroreduction to ethylene. A novel "reduction-cleavage-recrystallization" method is developed to modulate the Cu(II)-Trimesic acid (BTC) framework to form a Cu(I)-BTC structure enriched with free carboxyl groups in the secondary coordination environment (SCE). In contrast to Cu(II)-BTC, the Cu(I)-BTC shows higher catalytic activity and better ethylene selectivity (≈2.2-fold) for CO2 electroreduction, which is further enhanced by increasing the content of free carboxyl groups, resulting in ethylene Faraday efficiency of up to 57% and the durability of the catalyst could last for 38 h without performance decline. It indicates that the synergistic effect between Cu(I)-O coordinated structure and free carboxyl groups considerably enhances the dimerization of *CO intermediates and hinders the hydrogenation of *CO intermediates in these competitive pathways. This work unravels the strong dependence of CO2 electroreduction on the Cu valence state and coordination environment in MOFs and provides a platform for designing highly selective electrocatalytic CO2 reduction catalysts.

Bimetallic CPM-37(Ni,Fe) metal-organic framework: enhanced porosity, stability and tunable composition

A newly synthesized series of bimetallic CPM-37(Ni,Fe) metal-organic frameworks with different iron content (Ni/Fe ≈ 2, 1, 0.5, named CPM-37(Ni2Fe), CPM-37(NiFe) and CPM-37(NiFe2)) demonstrated high N2-based specific SBET surface areas of 2039, 1955, and 2378 m2 g-1 for CPM-37(Ni2Fe), CPM-37(NiFe), and CPM-37(NiFe2), having much higher values compared to the monometallic CPM-37(Ni) and CPM-37(Fe) with 87 and 368 m2 g-1 only. It is rationalized that the mixed-metal nature of the materials increases the structural robustness due to the better charge balance at the coordination bonded cluster, which opens interesting application-oriented possibilities for mixed-metal CPM-37 and other less-stable MOFs. In this work, the CPM-37-derived α,β-Ni(OH)2, γ-NiO(OH), and, plausibly, γ-FeO(OH) phases obtained via decomposition in the alkaline medium demonstrated a potent electrocatalytic activity in the oxygen evolution reaction (OER). The ratio Ni : Fe ≈ 2 from CPM-37(Ni2Fe) showed the best OER activity with a small overpotential of 290 mV at 50 mA cm-2, low Tafel slope of 39 mV dec-1, and more stable OER performance compared to RuO2 after 20 h chronopotentiometry at 50 mA cm-2.

Research progress on antibacterial applications of metal-organic frameworks and their biomacromolecule composites

With the extensive use of antibiotics, resulting in increasingly serious problems of bacterial resistance, antimicrobial therapy has become a global concern. Metal-organic frameworks (MOFs) are low-density porous coordination materials composed of metal ions and organic ligands, which can form composite materials with biomacromolecules such as proteins and polysaccharides. In recent years, MOFs and their derivatives have been widely used in the antibacterial field as efficient antibacterial agents. This review offers a detailed summary of the antibacterial applications of MOFs and their composites, and the different synthesis methods and antibacterial mechanisms of MOFs and MOF-based composites are briefly introduced. Finally, the challenges and prospects of MOFs-based antibacterial materials in the rapidly developing medical field were briefly discussed. We hope this review will provide new strategies for the medical application of MOFs-based antibacterial materials.

Unraveling the molecular mechanism for enhanced gas adsorption in mixed-metal MOFs via solid-state NMR spectroscopy

The incorporation of multiple metal ions in metal-organic frameworks (MOFs) through one-pot synthesis can induce unique properties originating from specific atomic-scale spatial apportionment, but the extraction of this crucial information poses challenges. Herein, nondestructive solid-state NMR spectroscopy was used to discern the atomic-scale metal apportionment in a series of bulk Mg1-xCox-MOF-74 samples via identification and quantification of eight distinct arrangements of Mg/Co ions labeled with a 13C-carboxylate, relative to Co content. Due to the structural characteristics of metal-oxygen chains, the number of metal permutations is infinite for Mg1-xCox-MOF-74, making the resolution of atomic-scale metal apportionment particularly challenging. The results were then employed in density functional theory calculations to unravel the molecular mechanism underlying the macroscopic adsorption properties of several industrially significant gases. It is found that the incorporation of weak adsorption sites (Mg2+ for CO and Co2+ for CO2 adsorption) into the MOF structure counterintuitively boosts the gas adsorption energy on strong sites (Co2+ for CO and Mg2+ for CO2 adsorption). Such effect is significant even for Co2+ remote from Mg2+ in the metal-oxygen chain, resulting in a greater enhancement of CO adsorption across a broad composition range, while the enhancement of CO2 adsorption is restricted to Mg2+ with adjacent Co2+. Dynamic breakthrough measurements unambiguously verified the trend in gas adsorption as a function of metal composition. This research thus illuminates the interplay between atomic-scale structures and macroscopic gas adsorption properties in mixed-metal MOFs and derived materials, paving the way for developing superior functional materials.

Metal-organic frameworks (MOFs) for photoelectrocatalytic (PEC) reducing carbon dioxide (CO2) to hydrocarbon fuels

MOF-based photoelectrocatalysis (PEC) using CO2 as an electron donor offers a green, clean, and extensible way to make hydrocarbon fuels under more tolerant conditions. Herein, basic principles of PEC reduction of CO2 and the preparation methods and characterization techniques of MOF-based materials are summarized. Furthermore, three applications of MOFs for improving the photoelectrocatalytic performance of CO2 reduction are described: (i) as photoelectrode alone; (ii) as a co-catalyst of semiconductor photoelectrode or as a substrate for loading dyes, quantum dots, and other co-catalysts; (iii) as one of the components of heterojunction structure. Challenges and future wave surrounding the development of robust PEC CO2 systems based on MOF materials are also discussed briefly.

Cu and Zn promoted Al-fumarate metal organic frameworks for electrocatalytic CO2 reduction

Metal organic frameworks (MOFs) are attractive materials to generate multifunctional catalysts for the electrocatalytic reduction of CO2 to hydrocarbons. Here we report the synthesis of Cu and Zn modified Al-fumarate (Al-fum) MOFs, in which Zn promotes the selective reduction of CO2 to CO and Cu promotes CO reduction to oxygenates and hydrocarbons in an electrocatalytic cascade. Cu and Zn nanoparticles (NPs) were introduced to the Al-fum MOF by a double solvent method to promote in-pore metal deposition, and the resulting reduced Cu-Zn@Al-fum drop-cast on a hydrophobic gas diffusion electrode for electrochemical study. Cu-Zn@Al-fum is active for CO2 electroreduction, with the Cu and Zn loading influencing the product yields. The highest faradaic efficiency (FE) of 62% is achieved at -1.0 V vs. RHE for the conversion of CO2 into CO, HCOOH, CH4, C2H4 and C2H5OH, with a FE of 28% to CH4, C2H4 and C2H5OH at pH 6.8. Al-fum MOF is a chemically robust matrix to disperse Cu and Zn NPs, improving electrocatalyst lifetime during CO2 reduction by minimizing transition metal aggregation during electrode operation.

Selective Gas-Phase Hydrogenation of CO2 to Methanol Catalysed by Metal-Organic Frameworks

Large scale production of green CH3 OH obtained from CO2 and green H2 is a highly wanted process due to the role of CH3 OH as H2 /energy carrier and for producing chemicals. Starting with a short summary of the advantages of metal-organic frameworks (MOFs) as catalysts in liquid-phase reactions, the present article highlights the opportunities that MOFs may offer also for some gas-phase reactions, particularly for the selective CO2 hydrogenation to CH3 OH. It is commented that there is a temperature compatibility window that combines the thermal stability of some MOFs with the temperature required in the CO2 hydrogenation to CH3 OH that frequently ranges from 250 to 300 °C. The existing literature in this area is briefly organized according to the role of MOF as providing the active sites or as support of active metal nanoparticles (NPs). Emphasis is made to show how the flexibility in design and synthesis of MOFs can be used to enhance the catalytic activity by adjusting the composition of the nodes and the structure of the linkers. The influence of structural defects and material crystallinity, as well as the role that should play theoretical calculations in models have also been highlighted.

Cu-based catalyst designs in CO2 electroreduction: precise modulation of reaction intermediates for high-value chemical generation

The massive emission of excess greenhouse gases (mainly CO2) have an irreversible impact on the Earth's ecology. Electrocatalytic CO2 reduction (ECR), a technique that utilizes renewable energy sources to create highly reduced chemicals (e.g. C2H4, C2H5OH), has attracted significant attention in the science community. Cu-based catalysts have emerged as promising candidates for ECR, particularly in producing multi-carbon products that hold substantial value in modern industries. The formation of multi-carbon products involves a range of transient intermediates, the behaviour of which critically influences the reaction pathway and product distribution. Consequently, achieving desirable products necessitates precise regulation of these intermediates. This review explores state-of-the-art designs of Cu-based catalysts, classified into three categories based on the different prospects of the intermediates' modulation: heteroatom doping, morphological structure engineering, and local catalytic environment engineering. These catalyst designs enable efficient multi-carbon generation in ECR by effectively modulating reaction intermediates.

GSH-depleting metal-polyphenol-network nanoparticles with dual enzyme activities induce enhanced ferroptosis

Ferroptosis is a non-apoptotic form of regulated cell death. The efficiency of ferroptosis is restrained in the tumor microenvironment (TME) by overexpression of glutathione (GSH) and insufficient production of hydrogen peroxide (H2O2). In this work, theranostic nanoparticles Ce-aMOFs@Fe3+-EGCG, termed MEFs, are developed by coating uniform Ce-based amorphous metal-organic frameworks (Ce-aMOFs) with epigallocatechin gallate (EGCG) and Fe3+. Fe3+ is chelated by the adjacent phenol hydroxyl groups in EGCG. In the tumor cell interior, overexpressed GSH and weak acidic medium degrade the coating to release Fe3+ and EGCG accompanied by exposure of Ce-aMOFs. Fe3+ and EGCG consume GSH along with turning Fe3+ into Fe2+. Ce-aMOFs act as a nanozyme possessing dual-enzymatic activities, i.e. superoxide dismutase (SOD)- and phosphatase-like activities. In the TME, Ce-aMOFs catalyze the conversion of endogenous superoxide (O2˙-) into H2O2, and Fe2+ catalyzes H2O2 to generate toxic hydroxyl radicals (˙OH), which may further induce tumor cell death through ferroptosis. In addition, the phosphatase-like activity of Ce-aMOFs may sustainably dephosphorylate NADPH and effectively inhibit intracellular biosynthesis of GSH. Therefore, MEFs ensure down-regulation of intracellular GSH levels and up-regulation of oxidative pressure, which enhance the ferroptosis effect.

Multivariate Metal-Organic Frameworks Prepared by Simultaneous Metal/Ligand Exchange for Enhanced C2-C3 Selective Recovery from Natural Gas

Recovering light alkanes from natural gas is a critical but challenging process in petrochemical production. Herein, we propose a postmodification strategy via simultaneous metal/ligand exchange to prepare multivariate metal-organic frameworks with enhanced capacity and selectivity of ethane (C2H6) and propane (C3H8) for their recovery from natural gas with methane (CH4) as the primary component. By utilizing the Kuratowski-type secondary building unit of CFA-1 as a scaffold, namely, {Zn5(OAc)4}6+, the Zn2+ metal ions and OAc- ligands were simultaneously exchanged by other transition metal ions and halogen ligands under mild conditions. Inspiringly, this postmodification treatment can give rise to improved capacity for C2H6 and C3H8 without a noticeable increase in CH4 uptake, and consequently, it resulted in significantly enhanced selectivity toward C2H6/CH4 and C3H8/CH4. In particular, by adjusting the species and amount of the modulator, the optimal sample CFA-1-NiCl2-2.3 demonstrated the maximum capacities of C2H6 (5.00 mmol/g) and C3H8 (8.59 mmol/g), increased by 29 and 32% compared to that of CFA-1. Moreover, this compound exhibited excellent separation performance toward C2H6/CH4 and C3H8/CH4, with high uptake ratios of 6.9 and 11.9 at 298 K and 1 bar, respectively, superior to the performance of a majority of the reported MOFs. Molecular simulations were applied to unravel the improved separation mechanism of CFA-1-NiCl2-2.3 toward C2H6/CH4 and C3H8/CH4. Furthermore, remarkable thermal/chemical robustness, moderate isosteric heat, and fully reproducible breakthrough experiments were confirmed on CFA-1-NiCl2-2.3, indicating its great potential for light alkane recovery from natural gas.

Magnetically and Electrically Responsive Soft Actuator Derived from Ferromagnetic Bimetallic Organic Framework

The advancement in smart devices and soft robotics necessitates the use of multiresponsive soft actuators with high actuation stroke and stable reversibility for their use in real-world applications. Here, this work reports a magnetically and electrically dual responsive soft actuator based on neodymium and iron bimetallic organic frameworks (NdFeMOFs@700). The ferromagnetic NdFeMOFs@700 exhibits a porous carbon structure with excellent magnetization saturation (166.96 emu g^-1 ) which allows its application to a dual functional material in both magnetoactive and electro-ionic actuations. The electro-ionic soft actuator, which is fabricated using NdFeMOFs@700 and PEDOT-PSS, demonstrates 4.5 times higher ionic charge storage capacity (68.21 mF cm^-2 ) and has excellent cycle stability compared with the PEDOT-PSS based actuator. Under a low sinusoidal input voltage of 1 V, the dual-responsive actuator displays bending displacement of 15.46 mm and also generates deflection of 10 mm at 50 mT. Present results show that the ferromagnetic bimetallic organic frameworks can open a new way to make dual responsive soft actuators due to the hierarchically porous structures with its high redox activity, superior magnetic properties, and larger electrochemical capacitance. With the NdFeMOFs@700 based soft actuators, walking movement of a starfish robot is demonstrated by applying both the magnetic and electric fields.

Cyclodextrin-metal-organic frameworks in molecular delivery, detection, separation, and capture: An updated critical review

Metal-organic frameworks (MOFs) are coordination compounds with tuneable structures and controllable functions. However, the biological toxicity of traditional MOFs materials is often inevitable, making their application in the biological field have many limitations. Therefore, frontier research increasingly focuses on developing biocompatible MOFs materials. Cyclodextrins (CDs), derived from starch, are favored by various biomaterials due to their good biosafety and are often seen in the preparation and application of MOFs materials. This review describes the features of MOFs materials, and the various preparation methods of CD-MOFs are analyzed in detail from the perspective of CD classification. Additionally, the promising applications of CD-MOFs materials for delivery, detection, separation, and capture of active molecules in recent studies are systematically discussed and summarized. In terms of safety, the CD-MOFs materials are meticulously summarized. Finally, this review presents the challenges and future prospects regarding the current CD-MOFs-based materials, which will shed new light on the application of such materials in various fields.

Nanomaterials as catalysts for CO2 transformation into value-added products: A review

Carbon dioxide (CO₂₎ is the most important greenhouse gas (GHG), accounting for 76% of all GHG emissions. The atmospheric CO₂ concentration has increased from 280 ppm in the pre-industrial era to about 418 ppm, and is projected to reach 570 ppm by the end of the 21^st century. In addition to reducing CO₂ emissions from anthropogenic activities, strategies to adequately address climate change must include CO₂ capture. To promote circular economy, captured CO₂ should be converted to value-added materials such as fuels and other chemical feedstock. Due to their tunable chemistry (which allows them to be selective) and high surface area (which allows them to be efficient), engineered nanomaterials are promising for CO₂ capturing and/or transformation. This work critically reviewed the application of nanomaterials for the transformation of CO₂ into various fuels, like formic acid, carbon monoxide, methanol, and ethanol. We discussed the literature on the use of metal-based nanomaterials, inorganic/organic nanocomposites, as well as other routes suitable for CO₂ conversion such as the electrochemical, non-thermal plasma, and hydrogenation routes. The characteristics, steps, mechanisms, and challenges associated with the different transformation technologies were also discussed. Finally, we presented a section on the outlook of the field, which includes recommendations for how to continue to advance the use of nanotechnology for conversion of CO₂ to fuels.

Highly Robust {In2}-Organic Framework for Efficiently Catalyzing CO2 Cycloaddition and Knoevenagel Condensation

To improve the catalytic performance of metal-organic frameworks (MOFs), creating higher defects is now considered as the most effective strategy, which can not only optimize the Lewis acidity of metal ions but also create more pore space to enhance diffusion and mass transfer in the channels. Herein, the exquisite combination of scarcely reported [In₂(CO₂)₅(H₂O)₂(DMF)₂] clusters and 2,6-bis(2,4-dicarboxylphenyl)-4-(4-carboxylphenyl)pyridine (H₅BDCP) under solvothermal conditions generated a highly robust nanoporous framework of {[In₂(BDCP)(DMF)₂(H₂O)₂](NO₃)}_n (NUC-65) with nanocaged voids (14.1 Å) and rectangular nanochannels (15.94 Å × 11.77 Å) along the a axis. It is worth mentioning that an In(1) ion displays extremely low tetra-coordination modes after the thermal removal of its associated four solvent molecules of H₂O and DMF. Activated {[In₂(BDCP)](Br)}_n (NUC-65Br), as a defective material because of its extremely unsaturated metal centers, could be generated by bromine ion exchange, solvent exchange, and vacuum drying. Catalytic experiments proved that the conversion of epichlorohydrin with 1 atm CO₂ into 4-(chloromethyl)-1,3-dioxolan-2-one catalyzed by 0.11 mol % NUC-65Br could reach 99% at 65 °C within 24 h. Moreover, with the aid of 5 mol % cocatalyst n-Bu₄NBr, heterogeneous NUC-65Br owns excellent universal catalytic performance in most epoxides under mild conditions. In addition, NUC-65Br, as a heterogeneous catalyst, exhibits higher activity and better selectivity for Knoevenagel condensation of aldehydes and malononitrile. Hence, this work offers a fresh insight into the design of structure defect cationic metal-organic frameworks, which can be better applied to various fields because of their promoted performance.

Construction of a nano dispersed Cr/Fe-polycrystalline sensor via high-energy mechanochemistry for simultaneous electrochemical determination of dopamine and uric acid

A bimetallic polycrystalline sensor (Cr/Fe-SNCM) having nanosized and high dispersion was designed and used for the electrochemical simultaneous determination of dopamine (DA) and uric acid (UA). Catalytic nanosized Cr/Fe were highly anchored on N/S/O-contained porous carbon with high dispersion and polycrystalline Cr/Fe via energetic mechanochemical method and high-temperature carbonization. The obtained Cr/Fe-SNCM exhibited high graphitized carbon supporter and endowed high electron transport and signal output for the whole sensor. Moreover, highly dispersed Cr/Fe sites and the polycrystalline form (metal-N/S/O) efficiently enhanced the catalytic reaction, leading to a limits of detection (based on the 3σ/m criterion) of 25.8 and 22.5 nM for DA and UA, respectively. This is 1-2 orders of magnitude lower than many state-of-the-art reported sensors. The Cr/Fe-SNCM_1.0 sensor exhibited wide working range (0.1 to 10.0 μM), high recovery (96-103%) and low relative standard deviation (RSD = 3.2-4.7%) for DA and UA in real serum samples, possessing high significance for practical large-scale applications.

Atomically Precise Integration of Multiple Functional Motifs in Catalytic Metal-Organic Frameworks for Highly Efficient Nitrate Electroreduction

Ammonia production plays a central role in modern industry and agriculture with a continuous surge in its demand, yet the current industrial Haber-Bosch process suffers from low energy efficiency and accounts for high carbon emissions. Direct electrochemical conversion of nitrate to ammonia therefore emerges as an appealing approach with satisfactory sustainability while reducing the environmental impact from nitrate pollution. To this end, electrocatalysts for efficient conversion of eight-electron nitrate to ammonia require collective contributions at least from high-density reactive sites, selective reaction pathways, efficient multielectron transfer, and multiproton transport processes. Here, we report a catalytic metal-organic framework (two-dimensional (2D) In-MOF In8) catalyst integrated with multiple functional motifs with atomic precision, including uniformly dispersed, high-density, single-atom catalytic sites, high proton conductivity (efficient proton transport channel), high electron conductivity (promoted by the redox-active ligands), and confined microporous environments. These eventually lead to a direct and efficient electrochemical reduction of nitrate to ammonia and record high yield rate, FE, and selectivity for NH₃ production. A novel "dynamic ligand dissociation" mechanism provides an unprecedented working principle that allows for the use of a high-quality MOF crystalline structure to function as highly ordered, high-density, single-atom catalyst (SAC)-like catalytic systems and ensures the maximum utilization of the metal centers within the MOF structure. Further, the atomically precise assembly of multiple functional motifs within a MOF catalyst offers an effective and facile strategy for the future development of framework-based enzyme-mimic systems.

Advancing mechanochemical synthesis by combining milling with different energy sources

Owing to its efficiency and unique reactivity, mechanochemical processing of bulk solids has developed into a powerful tool for the synthesis and transformation of various classes of materials. Nevertheless, mechanochemistry is primarily based on simple techniques, such as milling in comminution devices. Recently, mechanochemical reactivity has started being combined with other energy sources commonly used in solution-based chemistry. Milling under controlled temperature, light irradiation, sound agitation or electrical impulses in newly developed experimental setups has led to reactions not achievable by conventional mechanochemical processing. This Perspective describes these unique reactivities and the advances in equipment tailored to synthetic mechanochemistry. These techniques - thermo-mechanochemistry, sono-mechanochemistry, electro-mechanochemistry and photo-mechanochemistry - represent a notable advance in modern mechanochemistry and herald a new level of solid-state reactivity: mechanochemistry 2.0.

Synergetic Dual-Atom Catalysts: The Next Boom of Atomic Catalysts

Dual-atom catalysts (DACs) are an important branch of single-atom catalysts (SACs), in which the former can effectively break the dilemma faced by the traditional SACs. The synergetic effects between bimetallic atoms provide many active sites, promising to improve catalytic performance and even catalyze more complex reactions. This paper reviews the recent research progresses of two kinds of DACs, including homonuclear and heteronuclear DACs, and their applications in oxygen reduction, carbon dioxide reduction, hydrogen evolution, oxygen evolution, Zn-air batteries, tandem catalytic reactions, and so on. In addition, in order to promote the further development of DACs, the challenges and perspectives of DACs are put forward.

Selective electrochemical reduction of CO2 on compositionally variant bimetallic Cu-Zn electrocatalysts derived from scrap brass alloys

The electrocatalytic reduction of carbon dioxide (CO₂RR) into value-added fuels is a promising initiative to overcome the adverse effects of CO₂ on climate change. Most electrocatalysts studied, however, overlook the harmful mining practices used to extract these catalysts in pursuit of achieving high-performance. Repurposing scrap metals to use as alternative electrocatalysts would thus hold high privilege even at the compromise of high performance. In this work, we demonstrated the repurposing of scrap brass alloys with different Zn content for the conversion of CO₂ into carbon monoxide and formate. The scrap alloys were activated towards CO₂RR via simple annealing in air and made more selective towards CO production through galvanic replacement with Ag. Upon galvanic replacement with Ag, the scrap brass-based electrocatalysts showed enhanced current density for CO production with better selectivity towards the formation of CO. The density functional theory (DFT) calculations were used to elucidate the potential mechanism and selectivity of the scrap brass catalysts towards CO₂RR. The d-band center in the different brass samples with different Zn content was elucidated.

From Operando Raman Mechanochemistry to "NMR Crystallography": Understanding the Structures and Interconversion of Zn-Terephthalate Networks Using Selective 17O-Labeling

The description of the formation, structure, and reactivity of coordination networks and metal-organic frameworks (MOFs) remains a real challenge in a number of cases. This is notably true for compounds composed of Zn²⁺ ions and terephthalate ligands (benzene-1,4-dicarboxylate, BDC) because of the difficulties in isolating them as pure phases and/or because of the presence of structural defects. Here, using mechanochemistry in combination with operando Raman spectroscopy, the observation of the formation of various zinc terephthalate compounds was rendered possible, allowing the distinction and isolation of three intermediates during the ball-milling synthesis of Zn₃(OH)₄(BDC). An "NMR crystallography" approach was then used, combining solid-state NMR (¹H, ¹³C, and ¹⁷O) and density functional theory (DFT) calculations to refine the poorly described crystallographic structures of these phases. Particularly noteworthy are the high-resolution ¹⁷O NMR analyses, which were made possible in a highly efficient and cost-effective way, thanks to the selective ¹⁷O-enrichment of either hydroxyl or terephthalate groups by ball-milling. This allowed the presence of defect sites to be identified for the first time in one of the phases, and the nature of the H-bonding network of the hydroxyls to be established in another. Lastly, the possibility of using deuterated precursors (e.g., D₂O and d ₄-BDC) during ball-milling is also introduced as a means for observing specific transformations during operando Raman spectroscopy studies, which would not have been possible with hydrogenated equivalents. Overall, the synthetic and spectroscopic approaches developed herein are expected to push forward the understanding of the structure and reactivity of other complex coordination networks and MOFs.

Nanocage-based {In2Tm2}-organic framework for efficiently catalyzing the cycloaddition reaction of CO2 with epoxides and Knoevenagel condensation

The combination of [In2Tm2(μ2-OH)2(CO2)10(H2O)2] clusters and H5BDCP ligand generated a highly robust nanoporous MOF with high catalytic performance in the cycloaddition reaction of epoxides with CO2 and Knoevenagel condensation.

An yttrium-organic framework based on a hexagonal prism second building unit for luminescent sensing of antibiotics and highly effective CO2 fixation

An yttrium-organic framework based on a hexagonal prism second building unit was constructed from nonanuclear yttrium(iii) and 2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine for the luminescent sensing of antibiotics and highly effective CO2 fixation.

Unique protonconduction 3D ZnII metal organic framework exposure to aquaammonia vapor to enhance conductivity

The ZnII MOF with proton-conductivity obtained an optimal conductivity of 1.38 × 10−3 S cm−1 (100 °C) under 2 M aquaammonia vapor.

Nanochannel-Based {BaZn}-Organic Framework for Catalytic Activity on Cycloaddition Reaction of Epoxides with CO2 and Deacetalization-Knoevenagel Condensation

Because of the integrated properties from chemically dissimilar metals, microporous heterometallic MOFs have wider potential applicability, which prompts us to explore the tendency collocation of different metal cations in the...

Synthesis of FeNiCo Ternary Hydroxides through Green Grinding Method with Metal-Organic Frameworks as Precursors for Oxygen Evolution Reaction

Metal-organic framework (MOF)-derived materials have been widely applied to diversified fields until now due to their flexible processibility. Different kinds of suitable materials can be synthesized by varying MOF templates/precursors and synthesis methods. An appropriate method can skillfully fabricate the materials with excellent performance while meeting the environmentally friendly concept. In this work, a green and flexible grinding method was introduced to synthesize MOF-derived FeNiCo trimetallic materials without solvent-assistance, in which Co-ZIF-L was selected as a sacrificial precursor and Fe³⁺ and Ni²⁺ as etchants and dopants. Surprisingly, the as-prepared FeNiCo ternary hydroxides supported on Ni foam (G-FeNi-Co-ZIF-L/NF) showed superior electrocatalytic performance for the oxygen evolution reaction (OER) with a low overpotential of 248 mV at 10 mA cm^-2 . This work provides a prospective approach to synthesize various MOF-derived multi-metallic materials, which also opens the door for syntheses of OER electrocatalysts.

Toward sustainable syntheses of Ca-based MOFs

We report the use of benign and green precursors, including waste chicken eggshells and PET (polyethylene terephthalate) from recycled plastic bottles, for the facile synthesis of a variety of calcium-based metal-organic frameworks (Ca-MOFs), using water based and mechanochemical synthesis techniques.

Tribochemistry, Mechanical Alloying, Mechanochemistry: What is in a Name?

Over the decades, the application of mechanical force to influence chemical reactions has been called by various names: mechanochemistry, tribochemistry, mechanical alloying, to name but a few. The evolution of these terms has largely mirrored the understanding of the field. But what is meant by these terms, why have they evolved, and does it really matter how a process is called? Which parameters should be defined to describe unambiguously the experimental conditions such that others can reproduce the results, or to allow a meaningful comparison between processes explored under different conditions? Can the information on the process be encoded in a clear, concise, and self-explanatory way? We address these questions in this Opinion contribution, which we hope will spark timely and constructive discussion across the international mechanochemical community.