Metal-Organic Frameworks in Agriculture

Two-Dimensional Cu-Based MOF for Selective Staining of the Cellular Nucleus through Fluorescence Imaging and Selective Sorption of Dye Molecules in Aqueous Medium

A two-dimensional copper-based metal-organic framework, [Cu(C23H14O6)(C10H8N2)2]·H2O·DMSO, 1, was synthesized using pamoic acid (C23H16O6) and 4,4'-bipyridine (C10H8N2) as an organic ligand and Cu(II) as a metal ion. Single-crystal structure X-ray diffraction studies of the as-synthesized compound showed a two- dimensional structure with free hydroxyl groups. Upon excitation at 370 nm, the aqueous dispersion of [Cu(C23H14O6)(C10H8N2)2]·H2O·DMSO, 1, showed emission centered at 525 nm resulting from the intraligand energy transfer. Fluorescence microscopic experiments using a human epithelioid cervix carcinoma HeLa cell line were carried out, clearly showing that our compound selectively stained the cellular nucleus. To utilize the porous nature of [Cu(C23H14O6)(C10H8N2)2]·H2O·DMSO, 1, its dye sorption behavior in aqueous solution was determined, and a high affinity for methylene blue (MB) dye was confirmed. Our synthesized compound sorbed 88% MB dye with an initial concentration of 32 mg L-1, and its sorption capacity for MB was found to be 29.79 mg g-1. The possible mechanism of the dye sorption behavior was discussed in terms of the size and charge of dye molecules with respect to molecular-level interactions between the framework and the dye molecules.

Smart controlled-release nanopesticides based on metal-organic frameworks

The practical utilization rates of conventional pesticide formulations by target organisms are very low, which results in the pollution of ecological environments and the formation of pesticide residues in agricultural products. Water-based nanopesticide formulations could become alternative and effective formulations to eventually resolve the main issues of conventional pesticide formulations. In this feature article, we describe the design concept of smart (stimuli-responsive) controlled-release nanopesticides, which are created toward hierarchical targets (pests, pathogens, and foliage) in response to multidimensional stimuli from physiological and environmental factors (such as sunlight) of target organisms and plants, for achieving enhanced insecticidal and fungicidal efficacies. The pore sizes and functionalities of metal-organic frameworks (MOFs) can be fine-tuned through the choice of metal-containing units and organic ligands. Tailor-made MOF nanoparticles with large microporous or mesoporous sizes, as well as good biocompatibility and high thermal, mechanical, and chemical durabilities, are used to load pesticides within these pores followed by coating of plant polyphenols and natural polymers for stimuli-responsive controlled pesticide release. This feature article highlights our works on smart controlled-release MOF-based nanopesticides and also includes related works from other laboratories. The future challenges and promising prospects of smart controlled-release MOF-based nanopesticides are also discussed.

ZIF-8@Hydroxyapatite Composite as a High Potential Material for Prolonged Delivery of Agrochemicals

Although agrochemical practices can enhance agricultural productivity, their intensive application has resulted in the deterioration of ecosystems. Therefore, it is necessary to develop more efficient and less toxic methods against pests and infections while improving crop productivity. Moving toward sustainable development, in this work, we originally described the preparation of a composite (ZIF-8@HA) consisting of the coating of zeolitic-like metal-organic framework (MOF) ZIF-8 (based on Zn, an essential micronutrient in plants with antibacterial, antifungal, and antifouling properties) with hydroxyapatite (HA) nanoparticles (i.e., nanofertilizer). The interaction between the HA and ZIF-8 has been characterized through a combination of techniques, such as microscopic techniques, where the presence of a HA coating is demonstrated; or by analysis of the surface charge with a dramatic change in the Z-potential (from +18.7 ± 0.8 to -27.6 ± 0.7 mV for ZIF-8 and ZIF-8@HA, respectively). Interestingly, the interaction of HA with ZIF-8 delays the MOF degradation (from 4 h for pristine ZIF-8 to 168 h for HA-coated material), providing a slower and gradual release of zinc. After a comprehensive characterization, the potential combined fertilizer and bactericidal effect of ZIF-8@HA was investigated in wheat (Triticum aestivum) seeds and Pseudomonas syringae (Ps). ZIF-8@HA (7.3 ppm) demonstrated a great fertilizer effect, increasing shoot (9.4 %) and root length (27.1 %) of wheat seeds after 11 days at 25 °C under dark conditions, improving the results obtained with HA, ZIF-8, or ZnSO4 or even physically mixed constituents (HA + ZIF-8). It was also effective in the growth inhibition (>80 % of growth inhibition) of Ps, a vegetal pathogen causing considerable crop decline. Therefore, this work demonstrates the potential of MOF@HA composites and paves the way as a promising agrochemical with improved fertilizer and antibacterial properties.

Unravelling co-catalyst integration methods in Ti-based metal-organic gels for photocatalytic H2 production

The synthesis, characterization and photocatalytic hydrogen evolution reaction (HER) performance of a series of metal-organic gels (MOGs) constructed from titanium(IV)-oxo clusters and dicarboxylato linkers (benzene-1,4-dicarboxylato and 2-aminobenzene-1,4-dicarboxylato) are described. All the MOGs exhibit a microstructure comprised of metal-organic nanoparticles intertwined into a highly meso-/macroporous structure, as demonstrated by cryogenic transmission electron microscopy and gas adsorption isotherms. Comprehensive chemical characterization enabled the estimation of the complex formula for these defective materials, which exhibit low crystallinity and linker vacancies. To gain deeper insights into the local structure, X-ray absorption fine structure (XAFS) spectroscopy experiments were performed and compared to that of the analogous crystalline metal-organic framework. Additionally, the ultraviolet-visible absorption properties and optical band gaps were determined from diffuse reflectance spectroscopy data. The MOGs were studied as light absorbers for the sacrificial photocatalytic HER under simulated solar light irradiation using a platinum co-catalyst by either (1) in situ photodeposition or (2) ex situ doping process, through a post-synthetic metalation of the MOG structure. The chemical analysis of the metalation, along with high-angle annular dark-field scanning transmission electron microscopy, revealed that although the in situ addition of the co-catalyst led to greater HER rates (227 vs. 110 μmolH2 gMOG-1 h-1 for in situ and ex situ, respectively), the ex situ modification provided a finer distribution of platinum nanoparticles along the porous microstructure and, as a result, it led to a more efficient utilization of the co-catalyst (45 vs. 110 mmolH2 gPt-1 h-1).

Long-lasting insecticidal activity in plants driven by chlorogenic acid-loaded metal-organic frameworks

Metal-organic frameworks (MOFs) possess a variety of interesting features related to their composition and structure that make them excellent candidates to be used in agriculture. However, few studies have reported their use as delivery agents of agrochemicals. In this work, the natural polyphenol chlorogenic acid (CGA) was entrapped via simple impregnation in the titanium aminoterephthalate MOF, MIL-125-NH2. A combination of experimental and computational techniques was used to understand and quantify the encapsulated CGA in MIL-125-NH2. Subsequently, CGA delivery studies were carried out in water at different pHs, showing a fast release of CGA during the first 2 h (17.3 ± 0.3% at pH = 6.5). In vivo studies were also performed against larvae of mealworm (Tenebrio molitor), evidencing the long-lasting insecticidal activity of CGA@MIL-125-NH2. This report demonstrates the potential of MOFs in the efficient release of agrochemicals, and paves the way to their study against in vivo models.

Dose-Dependent Effect on Plant Growth of Exposure to Metal-Organic Framework MIL-101(Cr)

With the increasing use of metal-organic frameworks (MOFs), they will inevitably enter the environment intentionally or unintentionally. However, the effects of MOFs on plant growth are poorly understood. Here, we investigated the effects of exposure of the rhizosphere to MOFs on plant growth. MIL-101(Cr) was selected as a research model due to its commercial availability and wide use. Soybean plants at the two-leaf stage were subjected to various durations (1-7 days) and concentrations (0-1000 mg/L) of exposure in hydroculture with a control group treated with ultrapure water. We found that MIL-101(Cr) had a positive effect on soybean growth at a lower dose (i.e., 200 mg/L); however, at higher doses (i.e., 500 and 1000 mg/L), it exhibited significant toxicity to plant growth, which is evidenced by leaf damage. To investigate the mechanism of this effect, we used Cr as an indicator to quantify, track, and image MIL-101(Cr) in the plant with laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Results indicated that MIL-101(Cr) primarily accumulated in the cortex of roots (up to 40 times higher than that in stems), with limited translocation to stems and negligible presence in leaves and cotyledons. In addition, metabolomic analysis of soybeans indicated that low-dose MIL-101(Cr) could increase the sucrose content of soybean roots to promote plant growth, while a high dose could induce lipid oxidation in roots. This study provides valuable insights into the ecological toxicology of MOFs and underscores the importance of assessing their environmental impact for sustainable agricultural practices.

Polyphenol oxidase inactivation from apple juice by Al-based metal-organic frameworks: New anti-browning strategy in fruits and vegetables

Polyphenol oxidase (PPO) is critical due to enzymatic browning in fruits and vegetables, developing economic impact in fruits industry. Metal-Organic Frameworks (MOF) have shown interesting characteristics such as water stability, low toxicity, and good adsorption yield, making them good candidates for PPO inactivation. Al-based-MOFs, MIL-53(Al), DUT-5, and MIL-110 were tested as PPO inactivators in apple juice by enzyme-MOF interactions at r.t. through two possible mechanisms, i) substrate scavengers (substrates:catechol and 4-methylcatechol) or ii) enzyme activity modifiers. The scavenging behavior of Al-based-MOFs was moderate, in the same magnitude, being catechol adsorption better than 4-methylcatechol. PPO activity was reduced by at least 70% by MIL-53(Al)/DUT-5 in 10/30 min respectively, and MIL-110 inactivated PPO in 50 min with some structural modifications. Enzyme-MOF interactions are major responsible for PPO inactivation. This could be a new applicability of MOFs, as an alternate PPO inactivation process, easily included in juice processing, retaining sensorial/nutritional properties, developed at r.t thus energy-cost-effective.

Surface-supported metal-organic frameworks with geometric topological diversity via scanning tunneling microscopy

Surface-supported metal-organic frameworks (SMOFs) are long-range ordered periodic 2D lattice layers formed by inorganic metal nodes and organic ligands via coordination bonds on substrate surfaces. The atomic resolution STM lays a solid foundation for the conception and construction of SMOFs with large area, stable structure, and special function. In this review, the cutting-edge research of SMOFs from design strategy, preparation process, and how to accurately achieve structural and functional diversity are reviewed. Furthermore, we focus on the design and construction of novel and fascinating periodic and fractal structures, in which some typical honeycomb structures, Kagome lattice, hexagonal geometry, and Sierpiński triangles are summarized, and the related prospects for designing functional nanoscale systems and architectures are prospected. Finally, the challenges faced in the design and synthesis of SMOFs are denoted, and the application prospect and development trend of SMOFs are forecasted based on the current research status.

Metal-Organic Framework-Mediated Delivery of Nucleic Acid across Intact Plant Cells

Plant synthetic biology is applied in sustainable agriculture, clean energy, and biopharmaceuticals, addressing crop improvement, pest resistance, and plant-based vaccine production by introducing exogenous genes into plants. This technique faces challenges delivering genes due to plant cell walls and intact cell membranes. Novel approaches are required to address this challenge, such as utilizing nanomaterials known for their efficiency and biocompatibility in gene delivery. This work investigates metal-organic frameworks (MOFs) for gene delivery in intact plant cells by infiltration. Hence, small-sized ZIF-8 nanoparticles (below 20 nm) were synthesized and demonstrated effective DNA/RNA delivery into Nicotiana benthamiana leaves and Arabidopsis thaliana roots, presenting a promising and simplified method for gene delivery in intact plant cells. We further demonstrate that small-sized ZIF-8 nanoparticles protect RNA from RNase degradation and successfully silence an endogenous gene by delivering siRNA in N. benthamiana leaves.

Metal-Organic Framework-Enabled Sustainable Agrotechnologies: An Overview of Fundamentals and Agricultural Applications

With aggravated abiotic and biotic stresses from increasing climate change, metal-organic frameworks (MOFs) have emerged as versatile toolboxes for developing environmentally friendly agrotechnologies aligned with agricultural practices and safety. Herein, we have explored MOF-based agrotechnologies, focusing on their intrinsic properties, such as structural and catalytic characteristics. Briefly, MOFs possess a sponge-like porous structure that can be easily stimulated by the external environment, facilitating the controlled release of agrochemicals, thus enabling precise delivery of agrochemicals. Additionally, MOFs offer the ability to remove or degrade certain pollutants by capturing them within their pores, facilitating the development of MOF-based remediation technologies for agricultural environments. Furthermore, the metal-organic hybrid nature of MOFs grants them abundant catalytic activities, encompassing photocatalysis, enzyme-mimicking catalysis, and electrocatalysis, allowing for the integration of MOFs into degradation and sensing agrotechnologies. Finally, the future challenges that MOFs face in agrotechnologies were proposed to promote the development of sustainable agriculture practices.

Effect of HKUST-1 metal-organic framework in root and shoot systems, as well as seed germination

The seed germination, as well as root and shoot growth effect of HKUST-1 MOF, and its derived linear polymer ([Cu2(OH)(BTC)(H2O)]n·2nH2O) were herein examined. These effects were studied for seven higher plant species: sweet corn (Zea mays L.), black bean (Phaseolus vulgaris L.), tomato (Solanum lycopersicum L.), lettuce (Lactuca sativa L.), celosia (Celosia argentea L.), Aztec marigold (Tagetes erecta L.), and gypsophila (Gypsophila paniculata L.). The studied concentrations of MOFs were 10, 100, 500, or 1000 mg/L, enhancing the percentage of germination and growth of plants in most species. In general, the growth of the root is lower compared to the controls due to the capacity of the MOF to adsorb water and provide micronutrients such as C, O, and Cu, acting as a reserve for the plant. Shoot system growths are more pronounced with HKUST-1 compared with control, and linear polymer, due to the 3D structure adsorbs major water contents. It was found that all studied species are tolerant not only to Cu released from the material, but more evident to Cu structured in MOFs, and this occurs at high concentrations compared to many other systems. Finally, copper fixation was not present, studied by EDX mapping, banning the possibility of metallic phytotoxicity to the tested cultivars.

Reactivity of metal-oxo clusters towards biomolecules: from discrete polyoxometalates to metal-organic frameworks

Metal-oxo clusters hold great potential in several fields such as catalysis, materials science, energy storage, medicine, and biotechnology. These nanoclusters of transition metals with oxygen-based ligands have also shown promising reactivity towards several classes of biomolecules, including proteins, nucleic acids, nucleotides, sugars, and lipids. This reactivity can be leveraged to address some of the most pressing challenges we face today, from fighting various diseases, such as cancer and viral infections, to the development of sustainable and environmentally friendly energy sources. For instance, metal-oxo clusters and related materials have been shown to be effective catalysts for biomass conversion into renewable fuels and platform chemicals. Furthermore, their reactivity towards biomolecules has also attracted interest in the development of inorganic drugs and bioanalytical tools. Additionally, the structural versatility of metal-oxo clusters allows for the efficiency and selectivity of the biomolecular reactions they promote to be readily tuned, thereby providing a pathway towards reaction optimization. The properties of the catalyst can also be improved through incorporation into solid supports or by linking metal-oxo clusters together to form Metal-Organic Frameworks (MOFs), which have been demonstrated to be powerful heterogeneous catalysts. Therefore, this review aims to provide a comprehensive and critical analysis of the state of the art on biomolecular transformations promoted by metal-oxo clusters and their applications, with a particular focus on structure-activity relationships.

Promotion of phosphate release from humic acid-iron hydroxide coprecipitates in the presence of citric acid

Phosphate (P) resources are expected to be depleted within a century. Therefore, promoting balanced phosphorus fertilizer use and understanding phosphorus dynamics in soils containing iron (III), organic acids, and iron (III)-organic molecule particulates is crucial. This study investigated the sorption of citric acid onto humic acid-iron hydr(o)xide coprecipitate (HAFHCP) and the reciprocal effects of citric acid and P sorption on HAFHCP with different C/Fe ratios. The results showed that the maximum sorption capacity (MSC) of citric acid on HAFHCP decreased with increasing C/Fe ratios in the HAFHCP. The P sorption on HAFHCP pre-sorbed with citric acids (denoted as C-P) decreased by 50% compared with that of the MSC on FH. However, citric acids could only reduce P sorption by 20% when P was pre-sorbed on HAFHCP (denoted as P-C). The results suggested that upon the formation of HAFHCP, citric acids might increase P availability, especially in the C-P system. Although citric acids initially inhibited P sorption on HAFHCP in the P-C system, P sorption increased with prolonged reaction time. The exposures of new sorption sites upon dissolution of Fe from HAFHCP by citric acids or/and the formations of Fe bridge between P and organic domains of HAFHCP might contribute to these results. Additionally, a number of large HAFHCP aggregates became smaller while sorbing P due to the increasing electric repulsion on the surfaces of FH, enabling the subsequent dissolutions of more Fe by citric acids from HAFHCP in the P-C system. By integrating these innovative and sustainable strategies, the recycling and reuse of P can be optimized, thereby minimizing the reliance on synthetic fertilizers and mitigating environmental impacts. This approach fosters the efficient utilization of phosphorus resources, improves soil fertility, and enhances the overall resilience of agricultural systems and ecosystems.

Calcium l-Malate and d-Tartarate Frameworks as Adjuvants for the Sustainable Delivery of a Fungicide

Agrichemical adjuvants that combine a highly selective, efficient, and active mode of operation are critically needed to realize a more sustainable approach to their usage. Herein, we report the synthesis and full characterization of two new metal-organic frameworks (MOFs), termed UPMOF-1 and UPMOF-2, that were constructed from eco-friendly Ca2+ ions and naturally occurring, low-molecular weight plant acids, l-malic and d-tartaric acid, respectively. Upon structural elucidation of both MOFs, a widely used fungicide, hexaconazole (Hex), was loaded on the structures, reaching binding affinities of -5.0 and -3.5 kcal mol-1 and loading capacities of 63% and 62% for Hex@UPMOF-1 and Hex@UPMOF-2, respectively, as a result of the formation of stable host-guest interactions. Given the framework chemistry of the MOFs and their predisposition to disassembly under relevant agricultural conditions, the sustained release kinetics were determined to show nearly quantitative release (98% and 95% for Hex@UPMOF-1 and Hex@UPMOF-2, respectively) after >500 h, a release profile drastically different than the control (>80% release in 24 h), from which the high efficiency of these new systems was established. To confirm their high selectivity and activity, in vitro and in vivo studies were performed to illustrate the abilities of Hex@UPMOF-1 and Hex@UPMOF-2 to combat the known aggressive pathogen Ganoderma boninense that causes basal stem rot disease in oil palm. Accordingly, at an extremely low concentration of 0.05 μg mL-1, both Hex@UPMOF-1 and Hex@UPMOF-2 were demonstrated to completely inhibit (100%) G. boninense growth, and during a 26 week in vivo nursery trial, the progression of basal stem rot infection was completely halted upon treatment with Hex@UPMOF-1 and Hex@UPMOF-2 and seedling growth was accelerated given the additional nutrients supplied via the disassembly of the MOFs. This study represents a significant step forward in the design of adjuvants to support the environmentally responsible use of agrichemical crop protection.

High Capacity Adsorption and Degradation of a Nerve Agent Simulant and a Pesticide by a Nickel Pyrazolate Metal-Organic Framework

The development of materials that enable the efficient removal of toxic compounds is important for the improvement of current protective materials or decontamination technologies. Current materials rely either on agent removal by adsorption or by effecting (catalytic) degradation. Ideally, both of these mechanisms are combined in a single material in order to target a more broad spectrum of toxic agents and to improve the performance of the materials. Recent attempts to combine materials with either adsorptive or catalytic properties into a composite material are promising, although the overall performance often suffers from competition for the agent between the adsorptive and catalytic domains in the composites. In this work, we propose that metal-organic frameworks (MOFs) could feature both adsorptive properties as well as catalytic properties in a single structural domain, thereby avoiding a reduction in the overall performance originating from competitive agent interactions. We showcase this concept using the MOF Ni3(BTP)2, which exhibits strong affinity and high capacity for the storage of a nerve agent simulant and a pesticide. Moreover, it is demonstrated that the adsorbed agents are efficiently degraded and that the nontoxic degradation products are rapidly expelled from the MOF pores. Its ability to catalyze the hydrolytic degradation of both organophosphate and organophosphorothioate compounds highlights another unique feature of this material. The presented concept illustrates the feasibility for developing materials that target a broader spectrum of agents via adsorption, catalysis, or both and by their broader reactivity toward different types of agents.

ZIF-8 encapsulation improves the antifungal activity of benzaldehyde and methyl anthranilate in films

In this work, two ZIF-8-based biocomposites were obtained by entrapping the biomolecules benzaldehyde and methyl anthranilate via direct impregnation with fast encapsulation kinetics and high molecule payloads were achieved. The obtained biocomposites exhibit an enhanced antifungal activity against Penicilium expansum after integration in biopolymeric zein films in comparison with the action of free molecules, making these biomaterials promising candidates for food preservation and packaging applications.

Soil habitat function after innovative nanoagriproducts application: Effect of ageing on the avoidance behaviour of the soil invertebrates Enchytraeus crypticus and Folsomia candida

Research on nanotechnology with applications in agriculture has been gathering attention because it may achieve a good balance between agricultural production and environmental integrity. Among the vast nanomaterials, layered double hydroxides (LDHs) are a promising solution for supplying crops with macro- and/or micronutrients. Still, little is known about their safety implications for non-target organisms, such as soil invertebrates. The habitat function of soils might be impacted by potential stressors, which can be assessed through avoidance behaviour tests. This study aimed to assess the effect of two innovative agriproducts, Zn-Al-NO3 LDH and Mg-Al-NO3 LDH, on the avoidance behaviour of the enchytraeid Enchytraeus crypticus and the collembolan Folsomia candida, over time. Simultaneously, Zn and Mg potential release from LDHs to soil was evaluated. Overall, the behaviour of soil invertebrates differed between species, with enchytraeids being more sensitive to LDHs-treated soils than collembolans, possibly explained by their different physiological traits. The behaviour of soil organisms also depended on the LDH structural composition and was time-variable. Soil treated with Zn-Al-NO3 LDH was perceived as less favourable compared to Mg-Al-NO3 LDH, which was preferred to clean soil at most tested concentrations. LDHs toxicity was partly, but not exclusively, related to Zn and Mg release. Cations release over time was demonstrated in the chemical assessment. Still, LDHs toxicity to soil invertebrates decreased as increasing AC50 values were derived over time. Slower dissolution over time might explain the decrease in toxicity. Our study demonstrates that both soil invertebrates could sense LDHs in soil and eventually adapt their behaviour by avoiding or preferring, according to the type and level of LDH present.

MOF-based stimuli-responsive controlled release nanopesticide: mini review

By releasing an adequate amount of active ingredients when triggered by environmental and biological factors, the nanopesticides that respond to stimuli can enhance the efficacy of pesticides and contribute to the betterment of both the environment and food safety. The versatile nature and highly porous structure of metal-organic frameworks (MOFs) have recently garnered significant interest as drug carriers for various applications. In recent years, there has been significant progress in the development of metal-organic frameworks as nanocarriers for pesticide applications. This review focuses on the advancements, challenges, and potential future enhancements in the design of metal-organic frameworks as nanocarriers in the field of pesticides. We explore the various stimuli-responsive metal-organic frameworks carriers, particularly focusing on zeolitic imidazolate framework-8 (ZIF-8), which have been successfully activated by external stimuli such as pH-responsive or multiple stimuli-responsive mechanisms. In conclusion, this paper presents the existing issues and future prospects of metal-organic frameworks-based nanopesticides with stimuli-responsive controlled release.

Zn(II)-Based Mixed-Ligand-Bearing Coordination Polymers as Multi-Responsive Fluorescent Sensors for Detecting Dichromate, Iodide, Nitenpyram, and Imidacloprid

Coordination polymers (CPs) are organo-inorganic porous materials consisting of metal ions or clusters and organic linkers. These compounds have attracted attention for use in the fluorescence detection of pollutants. Here, two Zn-based mixed-ligand-bearing CPs, [Zn₂(DIN)₂(HBTC^2-)₂] (CP-1) and [Zn(DIN)(HBTC^2-)]·ACN·H₂O (CP-2) (DIN = 1,4-di(imidazole-1-yl)naphthalene, H₃BTC = 1,3,5-benzenetricarboxylic acid, and ACN = acetonitrile), were synthesized under solvothermal conditions. CP-1 and CP-2 were characterized by single-crystal X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, and powder X-ray diffraction analysis. Solid-state fluorescence analysis revealed an emission peak at 350 nm upon excitation at 225 and 290 nm. Fluorescence sensing tests showed that CP-1 was highly efficient, sensitive, and selective for detecting Cr₂O₇^2- at 225 and 290 nm, whereas I^- was only detected well at an excitation of 225 nm. CP-1 detected pesticides differently at excitation wavelengths of 225 and 290 nm; the highest quenching rates were for nitenpyram at 225 nm and imidacloprid at 290 nm. The quenching process may occur via the inner filter effect and fluorescence resonance energy transfer.

Rapid detection of the biomarker for cystinuria by a metal-organic framework fluorescent sensor

Arginine (Arg) is considered a valuable biomarker for various diseases, including cystinuria, and its concentration level holds significant implications for human health. To achieve the purposes of food evaluation and clinical diagnosis, it is imperative to develop a rapid and facile method for selective and sensitive determination of Arg. In this work, a novel fluorescent material (Ag/Eu/CDs@UiO-66) was synthesized by encapsulating carbon dots (CDs), Eu³⁺ and Ag ⁺ into UiO-66. This material can serve as a ratiometric fluorescent probe for detecting Arg. It exhibits a high sensitivity with a detection limit of 0.74 μM and a relatively broad linear range from 0-300 μM. After dispersing the composite Ag/Eu/CDs@UiO-66 in an Arg solution, the red emission of Eu³⁺ center at 613 nm was significantly enhanced, while the characteristic peak of CDs center at 440 nm remained unchanged. Therefore, a ratio fluorescence probe could be constructed based on the peak height ratio of the two emission peaks to achieve selective detection of Arg. In addition, the remarkable ratiometric luminescence response induced by Arg results in a significant color transition from blue to red under UV-lamp for Ag/Eu/CDs@UiO-66, which was convenient for visual analysis.

Ratiometric fluorescent sensor based on metal-organic framework for selective and sensitive detection of CO32

Carbonate ion (CO₃^2-) is an anion essential for the maintenance of life activities and is of great importance to human health. Here, a novel ratiometric fluorescent probe Eu/CDs@UiO-66-(COOH)₂ (ECU) was prepared by introducing europium ions (Eu³⁺) and carbon dots (CDs) into the UiO-66-(COOH)₂ parent framework under the guidance of a post-synthetic modification strategy and used for the detection of CO₃^2- ion in the aqueous environment. Interestingly, when CO₃^2- ions were added to the ECU suspension, the characteristic emission of carbon dots at 439 nm was significantly enhanced, while the characteristic emission of Eu³⁺ ions at 613 nm was reduced. Therefore, the detection of CO₃^2- ions can be realized through the peak height ratio of the two emissions. The probe had a low detection limit (about 1.08 μM) and a wide linear range (0-350 μM) for the detection of carbonate. In addition, the presence of CO₃^2- ions can cause a significant ratiometric luminescence response and resulted obvious red-to-blue color shift of the ECU under UV light, which will facilitate visual analysis by the naked eye.

A dispersive solid-phase extraction method for the determination of Aristolochic acids in Houttuynia cordata based on MIL-101(Fe): An analytes-oriented adsorbent selection design

In view of the molecular structure of Aristolochic acid I (AA-I) and Aristolochic acid II (AA-II), MIL-101(Fe) was selected as the sorbent to develop a dispersive solid-phase extraction (d-SPE) method for capturing the two analytes from Houttuynia cordata. The interactions between the sorbent and analytes were investigated by FT-IR, XPS and UV-Vis DRS spectra. The optimized method demonstrated good linearity with R² > 0.9999. The limit of detections (LODs) were 0.007 mg/L and 0.014 mg/L for AA-I and AA-II, respectively, lower than the limit stipulated by Chinese Pharmacopoeia (0.001 %, w/w). The recoveries for AA-I and AA-II were within the range of 73.3-106.4 %. The precisions of intra-day and inter-day were 0.9-5.8 % and 2.1-5.8 %, respectively. Thus, the established method demonstrated to be efficient and reliable to determine AA-I and AA-II in Houttuynia cordata.

Encapsulation of Copper Nanoparticles in Electrospun Nanofibers for Sustainable Removal of Pesticides

The excellent catalytic properties of copper nanoparticles (CuNPs) for the degradation of the highly toxic and recalcitrant chlorpyrifos pesticide are widely known. However, CuNPs generally present low stability caused by their high sensitivity to oxidation, which leads to a change of the catalytic response over time. In the current work, the immobilization of CuNPs into a polycaprolactone (PCL) matrix via electrospinning was demonstrated to be a very effective method to retard air and solvent oxidation and to ensure constant catalytic activity in the long term. CuNPs were successfully anchored into PCL electrospun fibers in the form of Cu₂O at different concentrations (from 1.25 wt % to 5 wt % with respect to the PCL), with no signs of loss by leaching out. The PCL mats loaded with 2.5 wt % Cu (PCL-2.5Cu) almost halved the initial concentration of pesticide (40 mg/L) after 96 h. This process was performed in two unprompted and continuous steps that consisted of adsorption, followed by degradation. Interestingly, the degradation process was independent of the light conditions (i.e., not photocatalytic), expanding the application environments (e.g., groundwaters). Moreover, the PCL-2.5Cu composite presents high reusability, retaining the high elimination capability for at least five cycles and eliminating a total of 100 mg/L of chlorpyrifos, without exhibiting any sign of morphological damages.

Efficient Eu3+-Integrated UiO-66 Probe for Ratiometric Fluorescence Sensing of Styrene and Cyclohexanone

The development of probes with sensitive and prompt detection of volatile organic compounds (VOCs) is of great importance for protecting human health and public security. Herein, we successfully prepared a series of bimetallic lanthanide metal-organic framework (Eu/Zr-UiO-66) by incorporating Eu³⁺ for fluorescence sensing of VOCs (especially styrene and cyclohexanone) using a one-pot method. Based on the multiple fluorescence signal responses of Eu/Zr-UiO-66 toward styrene and cyclohexanone, a ratiometric fluorescence probe using (I₆₁₇/I₃₂₀) and (I₆₁₇/I₃₃₀) as output signals was developed to recognize styrene and cyclohexanone, respectively. Benefitting from the multiple fluorescence response, the limits of detection (LODs) of Eu/Zr-UiO-66 (1:9) for styrene and cyclohexanone were 1.5 and 2.5 ppm, respectively. These are among the lowest reported levels for MOF-based sensors, and this is the first known material for fluorescence sensing of cyclohexanone. Fluorescence quenching by styrene was mainly owing to the large electronegativity of styrene and fluorescence resonance energy transfer (FRET). However, FRET was accounted for fluorescence quenching by cyclohexanone. Moreover, Eu/Zr-UiO-66 (1:9) exhibited good anti-interference ability and recycling performance for styrene and cyclohexanone. More importantly, the visual recognition of styrene and EB vapor can be directly realized with the naked eyes using Eu/Zr-UiO-66 (1:9) test strips. This strategy provides a sensitive, selective, and reliable method for the visual sensing of styrene and cyclohexanone.

Multifunctional Metal-Organic Framework (MOF)-Based Nanoplatforms for Crop Protection and Growth Promotion

Phytopathogen, pest, weed, and nutrient deficiency cause severe losses to global crop yields every year. As the core engine, agrochemicals drive the continuous development of modern agriculture to meet the demand for agricultural productivity and increase the environmental burden due to inefficient use. With new advances in nanotechnology, introducing nanomaterials into agriculture to realize agrochemical accurate and targeted delivery has brought new opportunities to support the sustainable development of green agriculture. Metal-Organic frameworks (MOFs), which weave metal ions/clusters and organic ligands into porous frameworks, have exhibited significant advantages in constructing biotic/abiotic stimuli-responsive nanoplatforms for controlled agrochemical delivery. This review emphasizes the recent developments of MOF-based nanoplatforms for crop protection, including phytopathogen, pest, and weed control, and crop growth promotion, including fertilizer/plant hormone delivery. Finally, forward-looking perspectives and challenges on MOF-based nanoplatforms for future applications in crop protection and growth promotion are also discussed.

Single-atom catalysts for hydroformylation of olefins

Hydroformylation is one of the most significant homogeneous reactions. Compared with homogeneous catalysts, heterogeneous catalysts are easy to be separated from the system. However, heterogeneous catalysis faces the problems of low activity and poor chemical/regional selectivity. Therefore, there are theoretical and practical significance to develop efficient heterogeneous catalysts. SACs can be widely applied in hydroformylation in the future, due to the high atom utilization efficiency, stable active sites, easy separation, and recovery. In this review, the recent advances of SACs for hydroformylation are summarized. The regulation of microstructure affected on the reactivity, stability of SACs, and chem/regioselectivity of SACs for hydroformylation are discussed. The support effect, ligand effect, and electron effect on the performance of SACs are proposed, and the catalytic mechanism of SACs is elaborated. Finally, we summarize the current challenges in this field, and propose the design and research ideas of SACs for hydroformylation of olefins.

Virus Management Using Metal-Organic Framework-Based Technologies

The eradication and isolation of viruses are two concurrent approaches to protect ourselves from viral infections and diseases. The quite versatile porous materials called metal-organic frameworks (MOFs), have recently emerged as efficient nanosized tools to manage viruses, and several strategies to accomplish these tasks have been developed. This review describes these strategies employing nanoscale MOFs against SARS-CoV-2, HIV-1, tobacco mosaic virus, etc., which include the sequestration by host-guest penetration inside pores, mineralization, design of a physical barrier, controlled delivery of organic and inorganic antiviral drugs or bioinhibitors, photosensitization of singlet oxygen, and direct contact with inherently cytotoxic MOFs.

Stabilization of Palladium-Nanoparticle-Decorated Postsynthesis-Modified Zr-UiO-66 MOF as a Reusable Heterogeneous Catalyst in C-C Coupling Reaction

Here we prepared a highly efficient and reusable catalyst by a step-by-step postsynthesis modification of UiO-66-NH₂ metal-organic frameworks (MOFs) with nitrogen-rich organic ligands and used it as support for the preparation of UiO-66-NH₂@cyanuric chloride@2-aminopyrimidine/Pd_NPs. The catalytic performance's results of UiO-66-NH₂@cyanuric chloride@2-aminopyrimidine/PdNPs, UiO-66-NH₂/PdNPs, and UiO-66-NH₂@cyanuric chloride/PdNPs indicate high efficiency of the modulation of the microenvironment of the palladium NPs. The addition of N-rich organic ligands through postsynthesis modification caused a unique structure of the final composite in favor of the progress of the C-C coupling reaction. Various techniques, including FT-IR, XRD, SEM, TEM, EDS, and elemental mapping, were used to characterize UiO-66-NH₂@cyanuric chloride@2-aminopyrimidine/Pd_NPs, indicating its successful preparation. Three C-C coupling reactions, including the Suzuki, Heck, and Sonogashira coupling reactions, were promoted using the produced catalyst. As a result of the postsynthesis modification (PSM), the proposed catalyst displays improved catalytic performance. In addition, the suggested catalyst was highly recyclable up to ten times without leaching of PdNPs.

Availability of Metribuzin-Loaded Polymeric Nanoparticles in Different Soil Systems: An Important Study on the Development of Safe Nanoherbicides

Nanoformulations have been used to improve the delivery of fertilizers, pesticides, and growth regulators, with a focus on more sustainable agriculture. Nanoherbicide research has focused on efficiency gains through targeted delivery and environmental risk reduction. However, research on the behavior and safety of the application of these formulations in cropping systems is still limited. Organic matter contained in cropping systems can change the dynamics of herbicide−soil interactions in the presence of nanoformulations. The aim of this study was to use classical protocols from regulatory studies to understand the retention and mobility dynamics of a metribuzin nanoformulation, compared to a conventional formulation. We used different soil systems and soil with added fresh organic material. The batch method was used for sorption−desorption studies and soil thin layer chromatography for mobility studies, both by radiometric techniques. Sorption parameters for both formulations showed that retention is a reversible process in all soil systems (H~1.0). In deep soil with added fresh organic material, nanoformulation was more sorbed (14.61 ± 1.41%) than commercial formulation (9.72 ± 1.81%) (p < 0.05). However, even with the presence of straw as a physical barrier, metribuzin in nano and conventional formulations was mobile in the soil, indicating that the straw can act as a barrier to reduce herbicide mobility but is not impeditive to herbicide availability in the soil. Our results suggest that environmental safety depends on organic material maintenance in the soil system. The availability can be essential for weed control, associated with nanoformulation efficiency, in relation to the conventional formulation.

Metolachlor metal-organic framework nanoparticles for reducing leaching, ecotoxicity and improving bioactivity

BACKGROUND

The adverse effects of pesticides has led to a series of ecological, environmental and public health issues. Amide herbicides are an important agrochemical, yet many are prone to leach and pollute the environment, which limits their further application. In this study, metolachlor (METO) was selected as a model pesticide and a controlled released nanoparticle (NP) system was constructed employing a zeolitic imidazolate framework-8 hybrid inorganic-organic porous material (METO@ZIF-8).

RESULTS

The synthesis parameters of METO@ZIF-8 were optimized, and the loading content of METO@ZIF-8 was maximized by a central composite design of response surface test. The NPs were regular dodecahedron with uniform size (mostly 54.3 nm diameter). METO@ZIF-8 had high specific surface area and good dispersal in water. Moreover, it endowed the active ingredient with a pH-responsive release property. The nanocarrier effectively improved the adsorption capacity of METO in soil and reduce the leaching by 10.3-21.7%. Pot experiments suggested that the control effect of METO@ZIF-8 was 16.6 and 48.4% higher than that of METO emulsifiable concentrate (EC) and METO technical concentration (TC) at the recommended dose. Based on the excellent controlled release profiles, METO@ZIF-8 did not affect corn plant growth and significantly reduced the risk of phytotoxicity induced by METO. METO@ZIF-8 effectively reduced acute toxicity in zebrafish compared with METO EC.

CONCLUSION

This study explored the fabrication of a nanocarrier for improving the efficacy and promoting the environmental safety of leachable amide herbicides. © 2022 Society of Chemical Industry.

Metal-porphyrinic framework nanotechnologies in modern agricultural management

Metal-porphyrinic frameworks are an important subclass of metal-organic frameworks (MOFs). These porous materials exhibit a large number of applications for sustainable development and related environmental considerations. Their attractive features include (1) as a free base or metalated with zinc(II) or iron(II or III), they are environmentally benign, and (2) they absorb visible light and are emissive and semi-conducting, making them convenient tools for sensing agrochemicals. But the key feature that makes these nano-sized pristine materials or their composites in many ways superior to most MOFs is their ability to photo-generate reactive oxygen species with visible light, including singlet oxygen. This review describes important issues related to agriculture, including controlled delivery of pesticides and agrochemicals, detection of pesticides and pathogenic metals, elimination of pesticides and toxic metals, and photodynamic antimicrobial activity, and has an important implication for food safety. This comprehensive review presents the progress of the rather rapid developments of these functional and increasingly nano-sized materials and composites in the area of sustainable agriculture.

Pectin functionalized metal-organic frameworks as dual-stimuli-responsive carriers to improve the pesticide targeting and reduce environmental risks

Encapsulation of active ingredients into intelligent response controlled release carriers has been recognized as a promising approach to enhance the utilization efficiency and reduce the environmental risks of pesticides. In this work, an intelligent redox and pectinase dual stimuli-responsive pesticide delivery system was constructed by bonding pectin with metal-organic frameworks (FeMOF nanoparticles) which were loaded with pyraclostrobin (PYR@FeMOF-pectin nanoparticles). The successful fabrication of PYR@FeMOF-pectin nanoparticles was proved by a series of physicochemical characterizations. The results indicated that the loading capacity of PYR@FeMOF-pectin nanoparticles for pyraclostrobin was approximately 20.6%. The pectin covered on the surface of PYR@FeMOF nanoparticles could protect pyraclostrobin from photolysis and improve their spreadability on rice blades effectively. Different biological stimuli associated with Magnaporthe oryzae could trigger the release of pyraclostrobin from the pesticide-loaded core-shell nanoparticles, resulting in the death of pathogens. The bioactivity survey determined that PYR@FeMOF-pectin nanoparticles had a superior fungicidal activity and a longer duration against Magnaporthe oryzae than pyraclostrobin suspension concentrate. In addition, the FeMOF-pectin nanocarriers showed no obvious phytotoxicity and could enhance the shoot length and root length of rice plants. More importantly, PYR@FeMOF-pectin nanoparticles had an 8-fold reduction in acute toxicity to zebrafish than that of pyraclostrobin suspension concentrate. Therefore, the dual-responsive FeMOF-pectin nanocarriers have great potential for realizing site-specific pesticide delivery and promoting plant growth.

Copper Glufosinate-Based Metal-Organic Framework as a Novel Multifunctional Agrochemical

Pesticides are agrochemical compounds used to kill pests (insects, rodents, fungi, or unwanted plants), which are key to meet the world food demand. Regrettably, some important issues associated with their widespread/extensive use (contamination, bioaccumulation, and development of pest resistances) demand a reduction in the amount of pesticide applied in crop protection. Among the novel technologies used to combat the deterioration of our environment, metal-organic frameworks (MOFs) have emerged as innovative and promising materials in agroindustry since they possess several features (high porosity, functionalizable cavities, ecofriendly composition, etc.) that make them excellent candidates for the controlled release of pesticides. Moving toward a sustainable development, in this work, we originally describe the use of pesticides as building blocks for the MOF construction, leading to a new type of agricultural applied MOFs (or AgroMOFs). Particularly, we have prepared a novel 2D-MOF (namely, GR-MOF-7) based on the herbicide glufosinate and the widely used antibacterial and fungicide Cu²⁺. GR-MOF-7 crystallizes attaining a monoclinic P2₁/c space group, and the asymmetric unit is composed of one independent Cu²⁺ ion and one molecule of the Glu^2- ligand. Considering the significant antibacterial activity of Cu-based compounds in agriculture, the potential combined bactericidal and herbicidal effect of GR-MOF-7 was investigated. GR-MOF-7 shows an important antibacterial activity against Staphylococcus aureus and Escherichia coli (involved in agricultural animal infections), improving the results obtained with its individual or even physical mixed precursors [glufosinate and Cu(NO₃)₂]. It is also an effective pesticide against germination and plant growth of the weed Raphanus sativus, an invasive species in berries and vines crops, demonstrating that the construction of MOFs based on herbicide and antibacterial/antifungal units is a promising strategy to achieve multifunctional agrochemicals. To the best of our knowledge, this first report on the synthesis of an MOF based on agrochemicals (what we have named AgroMOF) opens new ways on the safe and efficient MOF application in agriculture.