Solid-Liquid State Transformable Magnetorheological Millirobot

Amoeba-Inspired Soft Robot for Integrated Tumor/Infection Therapy and Painless Postoperative Drainage

Tumor recurrence and wound infection are devastating complications of wide excision surgery for melanoma, and deep postoperative wound drainage typically increases pain. An amoeba-inspired magnetic soft robot (ASR) with switchable dormant and active phases is developed to address the aforementioned challenges. The dormant ASR supports wounds through its solid-like elasticity and regulates reactive oxygen species (ROS) levels bidirectionally, promoting healing in infected wounds and eliminating residual tumors. It solves the challenge caused by the contradictory need for ROS scavenging in wound healing and ROS amplification in tumor/infection management. The active ASR removes absorbed wound exudate by crawling out from irregular wounds; interestingly, this crawling motion prevents damage to fragile tissues and alleviates wound pain via "non-direct friction." More importantly, ASR switches different states in response to an alternating magnetic field owing to its magnetothermal properties, and this process also exerts synergistic antitumor and bacteriostatic effects. Due to the appropriate mechanical structure (cohesive force) of ASR, the content of magnetic nanoparticles required to drive the ASR is ten-fold lower than that of conventional magnetic soft robots, enabling in vivo degradation. These outcomes highlight the vantage of the ASR for treating post-tumor excision wounds and underscore their potential for clinical application.

Untethered & Stiffness-Tunable Ferromagnetic Liquid Robots for Cleaning Thrombus in Complex Blood Vessels

Thrombosis is a significant threat to human health. However, the existing clinical treatment methods have limitations. Magnetic soft matter is used in the biomedical field for years, and ferromagnetic liquids exhibit tunable stiffness and on-demand movement advantages under magnetic fields. In this study, a ferromagnetic liquid robot (FMLR) is developed and applied it to thrombus removal in complex blood vessels. The FMLR consisted of Fe3O4 magnetic nanoparticles and dimethyl silicone oil. The FMLR can pass through a narrow complex maze through shape deformation by tailoring the intensity and direction of the external magnetic field. Finite element simulation analysis is used to validate the mechanism of controllable FMLR movements. Importantly, the storage modulus of FMLR can be tuned from 0.1 to 2018 Pa by varying the external magnetic intensity, ensuring its effectiveness in removing rigid and stubborn thrombi present on the vascular walls. Toward medical robotic applications, FMLR can be used in telerobotic neurointerventional. Experiments demonstrating the capability of FMLR to remove thrombi in the ear veins of rabbits are conducted. This study introduces an efficient approach for thrombus elimination, broadening the utilization of FMLRs within the realm of clinical medicine.

Water-Induced Shape-Locking Magnetic Robots

Untethered magnetic soft robots capable of performing adaptive locomotion and shape reconfiguration open up possibilities for various applications owing to their flexibility. However, magnetic soft robots are typically composed of soft materials with fixed modulus, making them unable to exert or withstand substantial forces, which limits the exploration of their new functionalities. Here, water-induced, shape-locking magnetic robots with magnetically controlled shape change and water-induced shape-locking are introduced. The water-induced phase separation enables these robots to undergo a modulus transition from 1.78 MPa in the dry state to 410 MPa after hydration. Moreover, the body material's inherent self-healing property enables the direct assembly of morphing structures and magnetic soft robots with complicated structures and magnetization profiles. These robots can be delivered through magnetic actuation and perform programmed tasks including supporting, blocking, and grasping by on-demand deformation and subsequent water-induced stiffening. Moreover, a water-stiffening magnetic stent is developed, and its precise delivery and water-induced shape-locking are demonstrated in a vascular phantom. The combination of untethered delivery, on-demand shape change, and water-induced stiffening properties makes the proposed magnetic robots promising for biomedical applications.

Enhancement of Magnetorheological Fluids with Size and Morphology-Optimized Fe3O4 Nanoparticles: Impacts on Rheological Properties and Stability

In this study, we synthesized Fe3O4 nanoparticles (Fe3O4 NPs) of varying sizes and morphologies using the solvothermal method and incorporated them as additives into carbonyl iron magnetorheological fluids (CI-MRFs). We tested the shear stress, yield stress, viscosity and storage modulus of the MRFs using a magnetorheometer to investigate how the size and morphology of Fe3O4 NPs influence the performance of MRFs. Our results indicate that the size of the additive nanoparticles significantly enhances the MR properties of MRFs more than their morphological attributes. This enhancement results from optimizing and stabilizing the CI magnetic chain structure of the nanoparticles in the presence of a magnetic field. Specifically, MRFs with Fe3O4 NPs averaging 250 nm in size exhibit higher yield stress and storage modulus and show increased resistance to shear strains. Although the nanoparticle morphology has a modest effect on the rheological properties of MRFs, hexahedral and octahedral particles can enhance rheological properties through increased internal friction compared to spherical particles. Additionally, Fe3O4 NPs of different sizes and morphologies improve the sedimentation stability of MRFs, with those around 250 nm being particularly effective at slowing down sedimentation. Both hexahedral and octahedral Fe3O4 NPs slow down sedimentation more effectively than spherical Fe3O4 NPs. This paper investigates the rheological properties of CI-MRFs by controlling the additive particle size and morphological features, providing a research foundation for the design and optimization of MRFs.

Engineering Magnetic Soft and Reconfigurable Robots

Magnetic control has gained popularity recently due to its ability to enhance soft robots with reconfigurability and untethered maneuverability, among other capabilities. Several advancements in the fabrication and application of reconfigurable magnetic soft robots have been reported. This review summarizes novel fabrication techniques for designing magnetic soft robots, including chemical and physical methods. Mechanisms of reconfigurability and deformation properties are discussed in detail. The maneuverability of magnetic soft robots is then briefly discussed. Finally, the present challenges and possible future work in designing reconfigurable magnetic soft robots for biomedical applications are identified.

Magnetoactive Millirobots with Ternary Phase Transition

Magnetoactive soft millirobots have made significant advances in programmable deformation, multimodal locomotion, and untethered manipulation in unreachable regions. However, the inherent limitations are manifested in the solid-phase millirobot as limited deformability and in the liquid-phase millirobot as low stiffness. Herein, we propose a ternary-state magnetoactive millirobot based on a phase transitional polymer embedded with magnetic nanoparticles. The millirobot can reversibly transit among the liquid, solid, and viscous-fluid phases through heating and cooling. The liquid-phase millirobot has elastic deformation and mobility for unimpeded navigation in a constrained space. The viscous-fluid phase millirobot shows irreversible deformation and large ductility. The solid-phase millirobot shows good shape stability and controllable locomotion. Moreover, the ternary-state magnetoactive millirobot can achieve prominent capabilities including stiffness change and shape reconfiguration through phase transition. The millirobot can perform potential functions of navigation in complex terrain, three-dimensional circuit connection, and simulated treatment in a stomach model. This magnetoactive millirobot may find new applications in flexible electronics and biomedicine.

Spreadable Magnetic Soft Robots with On-Demand Hardening

Magnetically actuated mobile robots demonstrate attractive advantages in various medical applications due to their wireless and programmable executions with tiny sizes. Confronted with complex application scenarios, however, it requires more flexible and adaptive deployment and utilization methods to fully exploit the functionalities brought by magnetic robots. Herein, we report a design and utilization strategy of magnetic soft robots using a mixture of magnetic particles and non-Newtonian fluidic soft materials to produce programmable, hardened, adhesive, reconfigurable soft robots. For deployment, their ultrasoft structure and adhesion enable them to be spread on various surfaces, achieving magnetic actuation empowerment. The reported technology can potentially improve the functionality of robotic end-effectors and functional surfaces. Experimental results demonstrate that the proposed robots could help to grasp and actuate objects 300 times heavier than their weight. Furthermore, it is the first time we have enhanced the stiffness of mechanical structures for these soft materials by on-demand programmable hardening, enabling the robots to maximize force outputs. These findings offer a promising path to understanding, designing, and leveraging magnetic robots for more powerful applications.

Millirobot Based on a Phase-Transformable Magnetorheological Liquid Metal

Droplet robots have attracted much attention in recent years due to their large-scale deformability and flexible mobility in confined spaces. However, droplet robots are always difficult to maintain rigid shapes, making them difficult to manipulate objects with large inertia. Moreover, their low conductivity makes them unable to complete tasks such as circuit repair. Herein, a millirobot made from magnetorheological liquid metal is proposed to address the problems. Specifically, the magnetorheological liquid metal (MLM) robot is made by engulfing iron particles into gallium-indium alloy, and the mass fraction of the MLM robot is determined by microscopic observation and rheological test. The MLM robot possesses both solid and liquid properties, enabling the robot with plasticity, large-scale deformability, good conductivity, motion flexibility, and good object manipulation. The MLM robot can achieve almost all of the functions of existing droplet robots, including splitting, merging, navigating in narrow channels, and pushing objects. In addition, it can also accomplish some other tasks that are difficult for existing droplet robots, such as pulling large objects, repairing damaged circuits selectively and reversibly, and repairing suspended circuits through plasticity. The demos show that MLM robots can traverse narrow spaces and repair circuit damage selectively and reversibly. It is believed that MLM robots can enrich diverse functionalities in the future.

Locally Addressable Energy Efficient Actuation of Magnetic Soft Actuator Array Systems

Advances in magnetoresponsive composites and (electro-)magnetic actuators have led to development of magnetic soft machines (MSMs) as building blocks for small-scale robotic devices. Near-field MSMs offer energy efficiency and compactness by bringing the field source and effectors in close proximity. Current challenges of near-field MSM are limited programmability of effector motion, dimensionality, ability to perform collaborative tasks, and structural flexibility. Herein, a new class of near-field MSMs is demonstrated that combines microscale thickness flexible planar coils with magnetoresponsive polymer effectors. Ultrathin manufacturing and magnetic programming of effectors is used to tailor their response to the nonhomogeneous near-field distribution on the coil surface. The MSMs are demonstrated to lift, tilt, pull, or grasp in close proximity to each other. These ultrathin (80 µm) and lightweight (100 gm-2 ) MSMs can operate at high frequency (25 Hz) and low energy consumption (0.5 W), required for the use of MSMs in portable electronics.

Amoeba-Inspired Magnetic Venom Microrobots

Nature provides a successful evolutionary direction for single-celled organisms to solve complex problems and complete survival tasks - pseudopodium. Amoeba, a unicellular protozoan, can produce temporary pseudopods in any direction by controlling the directional flow of protoplasm to perform important life activities such as environmental sensing, motility, predation, and excretion. However, creating robotic systems with pseudopodia to emulate environmental adaptability and tasking capabilities of natural amoeba or amoeboid cells remains challenging. Here, this work presents a strategy that uses alternating magnetic fields to reconfigure magnetic droplet into Amoeba-like microrobot, and the mechanisms of pseudopodia generation and locomotion are analyzed. By simply adjusting the field direction, microrobots switch in monopodia, bipodia, and locomotion modes, performing all pseudopod operations such as active contraction, extension, bending, and amoeboid movement. The pseudopodia endow droplet robots with excellent maneuverability to adapt to environmental variations, including spanning 3D terrains and swimming in bulk liquids. Inspired by the "Venom," the phagocytosis and parasitic behaviors have also been investigated. Parasitic droplets inherit all the capabilities of amoeboid robot, expanding their applicable scenarios such as reagent analysis, microchemical reactions, calculi removal, and drug-mediated thrombolysis. This microrobot may provide fundamental understanding of single-celled livings, and potential applications in biotechnology and biomedicine.