Assembling CdSe Quantum Dots into Polymeric Micelles Formed by a Polyethylenimine-Based Amphiphilic Polymer to Enhance Efficiency and Selectivity of CO2-to-CO Photoreduction in Water

Recent progress in stimuli-responsive polymeric micelles for targeted delivery of functional nanoparticles

Stimuli-responsive polymeric micelles have emerged as a revolutionary approach for enhancing the in vivo stability, biocompatibility, and targeted delivery of functional nanoparticles (FNPs) in biomedicine. This article comprehensively reviews the preparation methods of these polymer micelles, detailing the innovative strategies employed to introduce stimulus responsiveness and surface modifications essential for precise targeting. We delve into the breakthroughs in utilizing these micelles to selectively deliver various FNPs including magnetic nanoparticles, upconversion nanoparticles, gold nanoparticles, and quantum dots, highlighting their transformative impact in the biomedical realm. Concluding, we present an insight into the current research landscape, addressing the challenges at hand, and envisioning the future trajectory in this burgeoning domain. Join us as we navigate the exciting confluence of polymer science and nanotechnology in reshaping biomedical solutions.

Chemically bonded CdS/Bi2MoO6 Z-scheme heterojunction synergises with strong internal electric field for photocatalytic CO2 reduction

Constructing strong interfacial electric fields to enhance the surface charge transport kinetics is an effective strategy for promoting CO2 conversion. Herein, we present the fabrication of CdS-Bi2MoO6 Z-scheme heterojunctions with a robust internal electric field (IEF) using an in situ growth technique, establishing chemical bonding between the components. The IEF at the interface can offer an impetus for the segregation and transportation of photogenerated carriers, while the Cd-O chemical bonding mode acts as a rapid conduit for these carriers, thereby reducing the charge transfer distance. As a result, the Z-scheme charge transfer is accelerated due to the synergistic influence of these two factors. Therefore, the optimized CdS/Bi2MoO6 Z-scheme heterojunction possesses significantly enhanced dynamic carrier mobility, thus promoting the conversion of CO2 to CO without the need for additional co-catalysts or sacrificial agents. This optimization yields a remarkable CO selectivity of up to 97%. Meanwhile, the expedited Z-scheme charge transfer mechanism is validated through X-ray photoelectron spectroscopy, Kelvin probe force microscopy, and in situ diffuse reflectance infrared Fourier transform spectroscopy.

Strain-Induced Surface Interface Dual Polarization Constructs PML-Cu/Bi12O17Br2 High-Density Active Sites for CO2 Photoreduction

The insufficient active sites and slow interfacial charge transfer of photocatalysts restrict the efficiency of CO2 photoreduction. The synchronized modulation of the above key issues is demanding and challenging. Herein, strain-induced strategy is developed to construct the Bi-O-bonded interface in Cu porphyrin-based monoatomic layer (PML-Cu) and Bi12O17Br2 (BOB), which triggers the surface interface dual polarization of PML-Cu/BOB (PBOB). In this multi-step polarization, the built-in electric field formed between the interfaces induces the electron transfer from conduction band (CB) of BOB to CB of PML-Cu and suppresses its reverse migration. Moreover, the surface polarization of PML-Cu further promotes the electron converge in Cu atoms. The introduction of PML-Cu endows a high density of dispersed Cu active sites on the surface of PBOB, significantly promoting the adsorption and activation of CO2 and CO desorption. The conversion rate of CO2 photoreduction to CO for PBOB can reach 584.3 μmol g-1, which is 7.83 times higher than BOB and 20.01 times than PML-Cu. This work offers valuable insights into multi-step polarization regulation and active site design for catalysts.

Organic Polymer Dots Photocatalyze CO2 Reduction in Aqueous Solution

Developing low-cost and efficient photocatalysts to convert CO2 into valuable fuels is desirable to realize a carbon-neutral society. In this work, we report that polymer dots (Pdots) of poly[(9,9'-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-thiadiazole)] (PFBT), without adding any extra co-catalyst, can photocatalyze reduction of CO2 into CO in aqueous solution, rendering a CO production rate of 57 μmol g-1  h-1 with a detectable selectivity of up to 100 %. After 5 cycles of CO2 re-purging experiments, no distinct decline in CO amount and reaction rate was observed, indicating the promising photocatalytic stability of PFBT Pdots in the photocatalytic CO2 reduction reaction. A mechanistic study reveals that photoexcited PFBT Pdots are reduced by sacrificial donor first, then the reduced PFBT Pdots can bind CO2 and reduce it into CO via their intrinsic active sites. This work highlights the application of organic Pdots for CO2 reduction in aqueous solution, which therefore provides a strategy to develop highly efficient and environmentally friendly nanoparticulate photocatalysts for CO2 reduction.

A Smart Single-Fluorophore Polymer: Self-Assembly Shapechromic Multicolor Fluorescence and Erasable Ink

A novel smart fluorescent polymer polyethyleneimine-grafted pyrene (PGP) is developed by incorporating four stimuli-triggers at molecular level. The triggers are amphiphilicity, supramolecular host-guest sites, pyrene fluorescence indicator, and reversible chelation sites. PGP exhibits smart deformation and shape-dependent fluorescence in response to external stimuli. It can deform into three typical shapes with a characteristic fluorescence color, namely, spherical core-shell micelles of cyan-green fluorescence, standard rectangular nanosheets of yellow fluorescence, and irregular branches of deep-blue fluorescence. A quasi-reversible deformation between the first two shapes can be dynamically manipulated. Moreover, driven by reversible coordination and the resulting intramolecular photoinduced electron transfer, PGP can be used as an aqueous fluorescence ink with erasable and recoverable properties. The fluorescent patterns printed by PGP ink on paper can be rapidly erased and recovered by simple spraying a sequence of Cu2+ and ethylene diamine tetraacetic acid aqueous solutions. This erase/recover transformation can be repeated multiple times on the same paper. The multiple stimulus responsiveness of PGP makes it have potential applications in nanorobots, sensing, information encryption, and anticounterfeiting.

Quantum Dot Transfer from the Organic Phase to Acrylic Monomers for the Controlled Integration of Single-Photon Sources by Photopolymerization

This paper reports on a new strategy for obtaining homogeneous dispersion of grafted quantum dots (QDs) in a photopolymer matrix and their use for the integration of single-photon sources by two-photon polymerization (TPP) with nanoscale precision. The method is based on phase transfer of QDs from organic solvents to an acrylic matrix. The detailed protocol is described, and the corresponding mechanism is investigated and revealed. The phase transfer is done by ligand exchange through the introduction of mono-2-(methacryloyloxy) ethyl succinate (MES) that replaces oleic acid (OA). Infrared (IR) measurements show the replacement of OA on the QD surface by MES after ligand exchange. This allows QDs to move from the hexane phase to the pentaerythritol triacrylate (PETA) phase. The QDs that are homogeneously dispersed in the photopolymer without any clusterization do not show any significant broadening in their photoluminescence spectra even after more than 3 years. The ability of the hybrid photopolymer to create micro- and nanostructures by two-photon polymerization is demonstrated. The homogeneity of emission from 2D and 3D microstructures is confirmed by confocal photoluminescence microscopy. The fabrication and integration of a single-photon source in a spatially controlled manner by TPP is achieved and confirmed by auto-correlation measurements.

Dextran-Functionalized Super-nanoparticle Assemblies of Quantum Dots for Enhanced Cellular Immunolabeling and Imaging

Colloidal semiconductor quantum dots (QDs) are a popular material for applications in bioanalysis and imaging. Although individual QDs are bright, some applications benefit from the use of even brighter materials. One approach to achieve higher brightness is to form super-nanoparticle (super-NP) assemblies of many QDs. Here, we present the preparation, characterization, and utility of dextran-functionalized super-NP assemblies of QDs. Amphiphilic dextran was synthesized and used to encapsulate many hydrophobic QDs via a simple emulsion-based method. The resulting super-NP assemblies or "super-QDs" had hydrodynamic diameters of ca. 90-160 nm, were characterized at the ensemble and single-particle levels, had orders-of-magnitude superior brightness compared to individual QDs, and were non-blinking. Additionally, binary mixtures of red, green, and blue (RGB) colors of QDs were used to prepare super-QDs, including colors difficult to obtain from individual QDs (e.g., magenta). Tetrameric antibody complexes (TACs) enabled simple antibody conjugation for selective cellular immunolabeling and imaging with both an epifluorescence microscope and a smartphone-based platform. The technical limitations of the latter platform were overcome by the increased per-particle brightness of the super-QDs, and the super-QDs outperformed individual QDs in both cases. Overall, the super-QDs are a very promising material for bioanalysis and imaging applications where brightness is paramount.

Engineering Z-Scheme FeOOH/PCN with Fast Photoelectron Transfer and Surface Redox Kinetics for Efficient Solar-Driven CO2 Reduction

Solar-driven conversion of carbon dioxide (CO₂) without sacrificial agents offers an attractive alternative in sustainable energy research; nevertheless, it is often retarded by the sluggish water oxidation kinetics and severe charge recombination. To this end, a Z-scheme iron oxyhydroxide/polymeric carbon nitride (FeOOH/PCN) heterojunction, as identified by quasi in situ X-ray photoelectron spectroscopy, is constructed. In this heterostructure, the two-dimensional FeOOH nanorod provides rich coordinatively unsaturated sites and highly oxidative photoinduced holes to boost the sluggish water decomposition kinetics. Meanwhile, PCN acts as a robust agent for CO₂ reduction. Consequently, FeOOH/PCN achieves efficient CO₂ photoreduction with a superior selectivity of CH₄ (>85%), together with an apparent quantum efficiency of 2.4% at 420 nm that outperforms most two-step photosystems to date. This work offers an innovative strategy for the construction of photocatalytic systems toward solar fuel production.

Polyacrylic acid/polyethylene glycol hybrid antifouling interface for photoelectrochemical immunosensing of NSE based on ZnO/CdSe

In this paper, a novel photoelectrochemical (PEC) immunosensor based on ZnO/CdSe semiconductor composite material was constructed to detect neuron-specific enolase (NSE) in a super-sensitive and quantitative way. The antifouling interface composed of polyacrylic acid (PAA) and polyethylene glycol (PEG) can prevent non-specific proteins from adhering to the electrode surface. As an electron donor, ascorbic acid (AA) can increase the photocurrent's stability and intensity by clearing away photogenerated holes. Because of the specific recognition between antigen and antibody, the quantitative detection of NSE can be achieved. The PEC antifouling immunosensor based on ZnO/CdSe has a wide linear range (0.10 pg mL^-1-100 ng mL^-1) and a low detection limit (34 fg mL^-1), which has potential application in the clinical diagnosis of small cell lung cancer.