Directional Transport of Underwater Bubbles on Solid Substrates: Principles and Applications

Complementary Superwetting Structures Treated by a Femtosecond Laser for Simultaneous Spontaneous Directional Transport of Water Droplets and Underwater Bubbles

The control of fluid transport is crucial and has broad applications in the fields of intelligent systems and microfluidics. However, current studies usually focus on the spontaneous directional transport of a single type of fluid or require complex preparation processes. In this paper, the single femtosecond laser direct processing of complementary superwetting structures using polyimide/polytetrafluoroethylene is proposed, for the first time, to realize simultaneous spontaneous directional transport of water droplets and underwater bubbles without any additional energy or chemical treatment. The flexible laser fabrication enables the creation of diverse transport structures, facilitating the achievement of linear and curvilinear fluid transport on superwetting structures. In addition, relevant applications in self-transporting chemical reactions and bubble switching are presented. This technique provides a novel approach to fabricate patterned superwetting surfaces for applications in intelligent transport, microbiology, and chemistry.

Self-Driven Gas Spreading on Mesh Surfaces for Regeneration of Underwater Superhydrophobicity

Underwater superhydrophobic surfaces stand as a promising frontier in technological applications such as drag reduction, antifouling, and anticorrosion. Unfortunately, the air film, known as the plastron, on these surfaces tends to be unstable. To address this problem, active approaches have been designed to preserve or restore plastrons. In this work, a self-driven gas spreading superhydrophobic mesh (SHM) surface is designed to facilitate recovery of the plastron. The immersed SHM can be "wetted" by gas, even when the plastron is removed. We demonstrate that the injected gas can spread spontaneously along the SHM over a large area, which greatly simplifies the plastron replenishment process. By incorporating a locally coated gas-producing layer, we achieve rapid in situ plastron recovery and long-term immersion stability, extending the plastron lifespan by at least 48 times. We also provide a framework for designing an SHM with suitable structural dimensions for gas spreading. Furthermore, an SHM with asymmetric structural dimensions enables unidirectional gas transport by the capillary pressure difference. This SHM surface shows excellent drag reduction properties (37.2%) and has a high slip recovery coefficient (73.4%) after plastron loss. This facile and scalable method is expected to broaden the range of potential applications involving nonwetting-related fields.

Portable Triboelectric Electrostatic Tweezer for External Manipulation of Droplets within a Closed Femtosecond Laser-Treated Superhydrophobic System

Controllable droplet manipulation has diverse applications; however, limited methods exist for externally manipulating droplets in confined spaces. Herein, we propose a portable triboelectric electrostatic tweezer (TET) by integrating electrostatic forces with a superhydrophobic surface that can even manipulate droplets in an enclosed space. Electrostatic induction causes the droplet to be subjected to an electrostatic force in an electrostatic field so that the droplet can be moved freely with the TET on a superhydrophobic platform. Characterized by its high precision, flexibility, and robust binding strength, TET can manipulate droplets under various conditions and achieve a wide range of representative fluid applications such as droplet microreactors, precise self-cleaning, cargo transportation, the targeted delivery of chemicals, liquid sorting, soft droplet robotics, and cell labeling. Specifically, TET demonstrated the ability to manipulate internal droplets from the outside of a closed system, such as performing cell labeling experiments within a sealed Petri dish without opening the culture system.

Underwater Bubble Manipulation on Surfaces with Patterned Regions with Infused Lubricants

The flexible manipulation of underwater gas bubbles on solid substrates has attracted considerable research interest from scientists in the fields of water electrolysis, bubble microreactions, drug delivery, and heat transfer. Inspired by the oxygen-binding mechanisms of aquatic organisms, scientists have designed a series of interfacial materials for use in collecting gases, detecting and grading bubbles, and conducting microbubble reactions. Aerophilic surfaces are commonly used in underwater bubble manipulation platforms due to their excellent gas-trapping properties. However, during bubble transport, some of the bubbles are retained in the rough structure of the aerophilic surface and cause gas loss, which in the long run reduces the gas transport function. In addition, the aerophilic surface is prone to failure in high-humidity and high-pressure underwater environments. The lubricant-infused surface features an oil layer that remains stable on a rough substrate and is immiscible with water. Additionally, the bubbles are transported over the oil layer without causing losses other than those dissolved in water. These attributes make it more favorable than the aerophilic surface. Inspired by the unique properties of Nepenthes and cactus spines, we developed a patterned slippery surface [patterned lubricant-infused surface (PLIS)] through laser etching and ammonia etching that facilitates the coexistence of superaerophobic and aerophilic surfaces. The PLIS executes bubble capture utilizing a difference in wettability measuring 78°, transports bubbles through Laplace force and buoyancy, and regulates bubble release by restricting the contact area on the PLIS. The PLIS can be prepared rapidly and affordably in just about an hour, and its potential for large-scale production is high. Following tests for shear, acid and alkali resistance, and corrosion resistance, the PLIS exhibited impressive weathering resistance and appears to have potential for application in some extreme environments.

Bubble Unidirectional Transportation on Multipath Aerophilic Surfaces by Adjusting the Surface Microstructure

Comprehending and controlling the behavior of bubbles on solid surfaces is of significant importance in various fields including catalysis and drag reduction, both industrially and scientifically. Herein, Inspired by the superaerophilic properties of the lotus leaf surface, a series of asymmetrically patterned aerophilic surfaces were prepared by utilizing a facile mask-spraying method for directional transport of underwater bubbles. The ability of bubbles to undergo self-driven transportation in an asymmetric pattern is attributed to the natural tendency of bubbles to move toward regions with lower surface energy. In this work, the microstructure of the aerophilic surface is demonstrated as a critical element that influences the self-driven transport of bubbles toward regions of lower surface energy. The microstructure characteristic affects the energy barrier of forming a continuous gas film on the final regions. We classify three distinct bubble behaviors on the aerophilic surface, which align with three different underwater gas film evolution states: Model I, Model II, and Model III. Furthermore, utilizing the energy difference between the energy barrier that forms a continuous gas film and the gas-gas merging, gas-liquid microreaction in a specific destination on the multiple paths can be easily realized by preinjecting a bubble in the final region. This work provides a new view of the microevolutionary process for the diffusion, transport, and merging behavior of bubbles upon contact with an aerophilic pattern surface.

Bubble Engineering on Micro-/Nanostructured Electrodes for Water Splitting

Bubble behaviors play crucial roles in mass transfer and energy efficiency in gas evolution reactions. Combining multiscale structures and surface chemical compositions, micro-/nanostructured electrodes have drawn increasing attention. With the aim to identify the exciting opportunities and rationalize the electrode designs, in this review, we present our current comprehension of bubble engineering on micro-/nanostructured electrodes, focusing on water splitting. We first provide a brief introduction of gas wettability on micro-/nanostructured electrodes. Then we discuss the advantages of micro-/nanostructured electrodes for mass transfer (detailing the lowered overpotential, promoted supply of electrolyte, and faster bubble growth kinetics), localized electric field intensity, and electrode stability. Following that, we outline strategies for promoting bubble detachment and directional transportation. Finally, we offer our perspectives on this emerging field for future research directions.

Versatile bubble maneuvering on photopyroelectric slippery surfaces

Contactless bubble manipulation with a high spatiotemporal resolution brings a qualitative leap forward in a variety of applications. Despite considerable advances, light-induced bubble maneuvering remains challenging in terms of robust transportation, splitting and detachment. Here, a photopyroelectric slippery surface (PESS) with a sandwich structure is constructed to achieve the versatile bubble manipulation. Due to the generated dielectric wetting and nonuniform electric field under the irradiation of near infrared (NIR) light, a bubble is subject to both the Laplace force and dielectrophoresis force, enabling a high-efficiency bubble steering. We demonstrate that the splitting, merging and detachment of underwater bubbles can be achieved with high flexibility and precision, high velocity and agile direction maneuverability. We further extend the capability of bubble control to microrobots for cargo transportation, micropart assembly and transmission of gear structures. We envision this robust bubble manipulation strategy on the PESS would provide a valuable platform for various bubble-involved processes, ranging from microfluidic devices to soft robotics.

Self-Driving Underwater "Aerofluidics"

Here, the concept of "aerofluidics," in which a system uses microchannels to transport and manipulate trace gases at the microscopic scale to build a highly versatile integrated system based on gas-gas or gas-liquid microinteractions is proposed. A kind of underwater aerofluidic architecture is designed using superhydrophobic surface microgrooves written by a femtosecond laser. In the aqueous medium, a hollow microchannel is formed between the superhydrophobic microgrooves and the water environment, which allows gas to flow freely underwater for aerofluidic devices. Driven by Laplace pressure, gas can be self-transported along various complex patterned paths, curved surfaces, and even across different aerofluidic devices, with an ultralong transportation distance of more than 1 m. The width of the superhydrophobic microchannels of the designed aerofluidic devices is only ≈42.1 µm, enabling the aerofluidic system to achieve accurate gas transportation and control. With the advantages of flexible self-driving gas transportation and ultralong transportation distance, the underwater aerofluidic devices can realize a series of gas control functions, such as gas merging, gas aggregation, gas splitting, gas arrays, gas-gas microreactions, and gas-liquid microreactions. It is believed that underwater aerofluidic technology can have significant applications in gas-involved microanalysis, microdetection, biomedical engineering, sensors, and environmental protection.