MoS2-based nanoprobes for detection of silver ions in aqueous solutions and bacteria

Roles of Two-Dimensional Materials in Antibiofilm Applications: Recent Developments and Prospects

Biofilm-associated infections pose a significant challenge in healthcare, constituting 80% of bacterial infections and often leading to persistent, chronic conditions. Conventional antibiotics struggle with efficacy against these infections due to the high tolerance and resistance induced by bacterial biofilm barriers. Two-dimensional nanomaterials, such as those from the graphene family, boron nitride, molybdenum disulfide (MoS2), MXene, and black phosphorus, hold immense potential for combating biofilms. These nanomaterial-based antimicrobial strategies are novel tools that show promise in overcoming resistant bacteria and stubborn biofilms, with the ability to circumvent existing drug resistance mechanisms. This review comprehensively summarizes recent developments in two-dimensional nanomaterials, as both therapeutics and nanocarriers for precision antibiotic delivery, with a specific focus on nanoplatforms coupled with photothermal/photodynamic therapy in the elimination of bacteria and penetrating and/or ablating biofilm. This review offers important insight into recent advances and current limitations of current antibacterial nanotherapeutic approaches, together with a discussion on future developments in the field, for the overall benefit of public health.

From Bulk Molybdenum Disulfide (MoS2) to Suspensions of Exfoliated MoS2 in an Aqueous Medium and Their Applications

Two-dimensional (2D) layered materials like graphene, transition-metal dichalcogenides (TMDs), boron nitrides, etc., exhibit unique and fascinating properties, such as high surface-to-volume ratio, inherent mechanical flexibility and robustness, tunable bandgap, and high carrier mobility, which makes them an apt candidate for flexible electronics with low consumption of power. Because of these properties, they are in tremendous demand for advancement in energy, environmental, and biomedical sectors developed through various technologies. The production and scalability of these materials must be sustainable and ecofriendly to utilize these unique properties in the real world. Here, in this current review, we review molybdenum disulfide (MoS2 nanosheets) in detail, focusing on exfoliated MoS2 in water and the applicability of aqueous MoS2 suspensions in various fields. The exfoliation of MoS2 results in the formation of single or few-layered MoS2. Therefore, this Review focuses on the few layers of exfoliated MoS2 that have the additional properties of 2D layered materials and higher excellent compatibility for integration than existing conventional Si tools. Hence, a few layers of exfoliated MoS2 are widely explored in biosensing, gas sensing, catalysis, photodetectors, energy storage devices, a light-emitting diode (LED), adsorption, etc. This review covers the numerous methodologies to exfoliate MoS2, focusing on the various published methodologies to obtain nanosheets of MoS2 from water solutions and their use.

Recent progress in MoS2 nanostructures for biomedical applications: Experimental and computational approach

In the category of 2D materials, MoS2 a transition metal dichalcogenide, is a novel and intriguing class of materials with interesting physicochemical properties, explored in applications ranging from cutting-edge optoelectronic to the frontiers of biomedical and biotechnology. MoS2 nanostructures an alternative to heavy toxic metals exhibit biocompatibility, low toxicity and high stability, and high binding affinity to biomolecules. MoS2 nanostructures provide a lot of opportunities for the advancement of novel biosensing, nanodrug delivery system, electrochemical detection, bioimaging, and photothermal therapy. Much efforts have been made in recent years to improve their physiochemical properties by developing a better synthesis approach, surface functionalization, and biocompatibility for their safe use in the advancement of biomedical applications. The understanding of parameters involved during the development of nanostructures for their safe utilization in biomedical applications has been discussed. Computational studies are included in this article to understand better the properties of MoS2 and the mechanism involved in their interaction with biomolecules. As a result, we anticipate that this combined experimental and computational studies of MoS2 will inspire the development of nanostructures with smart drug delivery systems, and add value to the understanding of two-dimensional smart nano-carriers.

Absorbance biosensors-based hybrid [Formula: see text] nanosheets for Escherichia coli detection

Detecting Escherichia coli is essential in biomedical, environmental, and food safety applications. In this paper, we have developed a simple, rapid, sensitive, and selective E. coli DNA sensor based on the novel hybrid-type [Formula: see text] and [Formula: see text] nanosheets. The sensor uses the absorbance measurement to distinguish among the DNA of E. coli, Vibrio proteolyticus, and Bacillus subtilis when implemented in conjunction with [Formula: see text]-probes. Our experiments showed that the absorbance increased when sensors detected E. coli DNA, whereas it decreased when sensors detected V. proteolyticus and B. subtilis DNA. To the best of authors' knowledge, there are no reports using the novel hybrid-[Formula: see text] and [Formula: see text] materials for differentiating three types of DNA using cost-effective and rapid absorbance measurements. In addition, the label-free E. coli DNA biosensor exhibited a linear response in the range of 0 fM to 11.65 fM with a limit of detection of 2 fM. The effect of [Formula: see text]-probes on our sensors' working performance is also investigated. Our results will facilitate further research in pathogen detection applications, which have not been fully developed yet.

Sensitive and rapid detection of tetrodotoxin based on gold nanoflower-and latex microsphere-labeled monoclonal antibodies

Tetrodotoxin (TTX) could result in serious diseases due to its extremely high neurotoxicity. Thus, it is of great importance to measure TTX for food safety. In this study, an anti-TTX monoclonal antibody with good specificity and high affinity was used to develop the immunochromatographic test strips (ICTS). Gold nanoflower (AuNF) with multiple branches and latex microsphere (LM) with large particle size as signal reporters were employed for improving the sensitivity of test strips. Both AuNF and LM probes are stable, and the developed ICTS were specific to TTX, demonstrating no cross-reactivity with other marine toxins. The linear range of AuNF- and LM-based strips for TTX was 9.49-330.98 ng/mL and 5.40-443.19 ng/mL, respectively. The limit of detection (LOD) of AuNF- and LM-based strips was determined to be 9.49 ng/mL and 5.40 ng/mL, respectively. In summary, the developed ICTS based on AuNF and LM signal probes displayed enhancement of sensitivity and provided rapid and specific detection of TTX.

Fluorescence off-on nanosensor based on MoS2 nanosheets and oligonucleotides for the alternative detection of mercury(II) ions or silver(I) ions

As traditional methods for detection of heavy metal pollution in water involve complex procedures and require expensive equipment, there is a great deal of interest in the development of rapid and simple methods for determining heavy metal ions in water. Here, a nanobiosensor based on molybdenum disulphide (MoS₂) nanosheets and fluorophore (FAM) labeled oligonucleotides was proposed, and fluorescence spectroscopy was adopted for detection of Hg²⁺ or Ag⁺ ions in aqueous solution. The principle underlying detection by the sensor involves the formation of T-Hg²⁺-T or C-Ag⁺-C mismatches by single-stranded DNA (ssDNA) rich in thymine (T) or cytosine (C), thereby forming stable double-stranded DNA (dsDNA) structures. By exploiting the different adsorption capacity of MoS₂ nanosheets for ssDNA and dsDNA, when oligonucleotides were in a single chain state, MoS₂ nanosheets possessed a strong adsorption capacity for ssDNA, resulting in fluorescence quenching of FAM. After the addition of Hg²⁺ or Ag⁺, ssDNA formed double chains structure, the fluorescence recovered due to the weak adsorption capacity of MoS₂ nanosheets for dsDNA. Along this line, an "off-on" mode fluorescence nanobiosensor was designed to alternatively detect these two heavy metal ions in water. The sensor showed high sensitivity and excellent selectivity for both Hg²⁺ and Ag⁺ ions, with minimum detection limits of 6.8 nM and 8.9 nM, respectively.

Recent Progress in Phase Regulation, Functionalization, and Biosensing Applications of Polyphase MoS2

The disulfide compounds of molybdenum (MoS₂ ) are layered van der Waals materials that exhibit a rich array of polymorphic structures. MoS₂ can be roughly divided into semiconductive phase and metallic phase according to the difference in electron filling state of the 4d orbital of Mo atom. The two phases show completely different properties, leading to their diverse applications in biosensors. But to some extent, they compensate for each other. This review first introduces the relationship between phase state and the chemical/physical structures and properties of MoS₂ . Furthermore, the synthetic methods are summarized and the preparation strategies for metastable phases are highlighted. In addition, examples of electronic and chemical property designs of MoS₂ by means of doping and surface modification are outlined. Finally, studies on biosensors based on MoS₂ in recent years are presented and classified, and the roles of MoS₂ with different phases are highlighted. This review offers references for the selection of materials to construct different types of biosensors based on MoS₂ , and provides inspiration for sensing performance enhancement.

Two-Dimensional Material-Based Electrochemical Sensors/Biosensors for Food Safety and Biomolecular Detection

Two-dimensional materials (2DMs) exhibited great potential for applications in materials science, energy storage, environmental science, biomedicine, sensors/biosensors, and others due to their unique physical, chemical, and biological properties. In this review, we present recent advances in the fabrication of 2DM-based electrochemical sensors and biosensors for applications in food safety and biomolecular detection that are related to human health. For this aim, firstly, we introduced the bottom-up and top-down synthesis methods of various 2DMs, such as graphene, transition metal oxides, transition metal dichalcogenides, MXenes, and several other graphene-like materials, and then we demonstrated the structure and surface chemistry of these 2DMs, which play a crucial role in the functionalization of 2DMs and subsequent composition with other nanoscale building blocks such as nanoparticles, biomolecules, and polymers. Then, the 2DM-based electrochemical sensors/biosensors for the detection of nitrite, heavy metal ions, antibiotics, and pesticides in foods and drinks are introduced. Meanwhile, the 2DM-based sensors for the determination and monitoring of key small molecules that are related to diseases and human health are presented and commented on. We believe that this review will be helpful for promoting 2DMs to construct novel electronic sensors and nanodevices for food safety and health monitoring.

Design and synthesis of a combined meso-adsorbent/chemo-sensor for extraction and detection of silver ions

We synthesized a new pH-dependent meso-captor/sensor for the visual monitoring and selective sequestering of Ag(I) ions from wastewater. The SBA-16 microspheres were successfully synthesized via a direct hydrothermal treatment through surfactant-assisted cooperative self-assembly. The meso-captor/sensor was designed via the direct immobilization of the chromogenic Acid Blue 90 (AB90) chelate into cubical large, open mesoporous SBA-16 carriers and investigate of its ability to detect and retain silver ions from aqueous solutions. Results show that the synthesized SBA-16 microspheres were retained after modification and the AB90 functional groups were immobilized hierarchically inside the mesopore channels. This was evidenced by the N₂ adsorption, X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared (FTIR), Scanning Electron Microscope (SEM), High-Resolution Transmission Electron Microscope (HR-TEM), and elemental analyses. Batch adsorption experiments were carried out and the effects of various parameters on Ag(I) ions removal and detection were determined. The optimum adsorption/detection of Ag(I) ions were recorded at a pH of 6.2 within 30 min with color change from a brilliant blue to a pale blue-gray. The spectral response for [SBA-16@AB90 → Ag(I)] complex showed a maximum reflectance at λ_max = 385 nm within 2.5 min response time (t_R); the LOD was close to 3.87 µg/L while the LOQ approached 12.83 µg/L, this was attributed to the concentration range at which a linear signal has been observed against Ag(I) analyte concentration (i.e., 5 to 1000 µg/L) at pH 6.2 with standard deviation (SD) of 0.077 (RSD% = 9.5 at n = 8).

A novel dual-emission fluorescent probe for ratiometric and visual detection of Cu2+ ions and Ag+ ions

In this work, the biomolecule glutathione was used to prepare cyan fluorescent carbon dots (GSH@CDs) by a hydrothermal method. The GSH@CDs were adopted as the scaffolds to synthesize fluorescent gold nanoclusters (GSH@CDs-Au NCs) with two independent emission peaks at 430 nm and 700 nm. A fluorescent method for the Cu²⁺ and Ag⁺ ion assay was established based on the fluorescence quenching or enhancement at 700 nm of GSH@CDs-Au NCs. The fluorescent test strips were successfully prepared for visual detection of Cu²⁺ ions and Ag⁺ ions based on GSH@CDs-Au NCs. In addition, GSH@CDs-Au NCs were found to possess well peroxidase-like activity.

Molybdenum Disulfide-Based Nanoprobes: Preparation and Sensing Application

The use of nanoprobes in sensors is a popular way to amplify their analytical performance. Coupled with two-dimensional nanomaterials, nanoprobes have been widely used to construct fluorescence, electrochemical, electrochemiluminescence (ECL), colorimetric, surface enhanced Raman scattering (SERS) and surface plasmon resonance (SPR) sensors for target molecules' detection due to their extraordinary signal amplification effect. The MoS₂ nanosheet is an emerging layered nanomaterial with excellent chemical and physical properties, which has been considered as an ideal supporting substrate to design nanoprobes for the construction of sensors. Herein, the development and application of molybdenum disulfide (MoS₂)-based nanoprobes is reviewed. First, the preparation principle of MoS₂-based nanoprobes was introduced. Second, the sensing application of MoS₂-based nanoprobes was summarized. Finally, the prospect and challenge of MoS₂-based nanoprobes in future were discussed.

Photoelectrochemical assay based on CdS nanocrystal\hexagonal carbon-nitrogen tube nanocomposite for detection of silver ions

A photochemical assay was reported based on CdS nanocrystal (NC)\hexagonal carbon-nitrogen tube (HCNT) nanocomposite for the detection of Ag⁺. When CdS NCs were combined with HCNT, the photocurrent intensity was increased extensively. After incubation of Ag⁺ with CdS NC\HCNT nanocomposite-modified electrode, Ag₂S was formed on the electrode by the ion-change reaction. As the band gap of Ag₂S cannot match well with HCNT, the photogenerated electron-hole pairs cannot separate efficiently, so the photocurrent intensity decreases. A good linear relationship between the concentration of Ag⁺ in the range from 0.01 to 3 μM and the corresponding photocurrent intensity was obtained with a detection limit of 3.3 nM (S/N = 3). The assay was employed to detect Ag⁺ in lake water and human serum with satisfactory results, which indicated that it might have a broad application in different areas. Photoelectrochemical assay was reported based on CdS nanocrystal\hexagonal carbon-nitrogen tube nanocomposite for detection of Ag^.

Bio-inspired Track-Etched Polymeric Nanochannels: Steady-State Biosensors for Detection of Analytes

Bio-inspired polymeric nanochannel (also referred as nanopore)-based biosensors have attracted considerable attention on account of their controllable channel size and shape, multi-functional surface chemistry, unique ionic transport properties, and good robustness for applications. There are already very informative reviews on the latest developments in solid-state artificial nanochannel-based biosensors, however, which concentrated on the resistive-pulse sensing-based sensors for practical applications. The steady-state sensing-based nanochannel biosensors, in principle, have significant advantages over their counterparts in term of high sensitivity, fast response, target analytes with no size limit, and extensive suitable range. Furthermore, among the diverse materials, nanochannels based on polymeric materials perform outstandingly, due to flexible fabrication and wide application. This compressive Review summarizes the recent advances in bio-inspired polymeric nanochannels as sensing platforms for detection of important analytes in living organisms, to meet the high demand for high-performance biosensors for analysis of target analytes, and the potential for development of smart sensing devices. In the future, research efforts can be focused on transport mechanisms in the field of steady-state or resistive-pulse nanochannel-based sensors and on developing precisely size-controlled, robust, miniature and reusable, multi-functional, and high-throughput biosensors for practical applications. Future efforts should aim at a deeper understanding of the principles at the molecular level and incorporating these diverse pore architectures into homogeneous and defect-free multi-channel membrane systems. With the rapid advancement of nanoscience and biotechnology, we believe that many more achievements in nanochannel-based biosensors could be achieved in the near future, serving people in a better way.

Engineered two-dimensional nanomaterials: an emerging paradigm for water purification and monitoring

Water scarcity has become an increasingly complex challenge with the growth of the global population, economic expansion, and climate change, highlighting the demand for advanced water treatment technologies that can provide clean water in a scalable, reliable, affordable, and sustainable manner. Recent advancements on 2D nanomaterials (2DM) open a new pathway for addressing the grand challenge of water treatment owing to their unique structures and superior properties. Emerging 2D nanostructures such as graphene, MoS₂, MXene, h-BN, g-C₃N₄, and black phosphorus have demonstrated an unprecedented surface-to-volume ratio, which promises ultralow material use, ultrafast processing time, and ultrahigh treatment efficiency for water cleaning/monitoring. In this review, we provide a state-of-the-art account on engineered 2D nanomaterials and their applications in emerging water technologies, involving separation, adsorption, photocatalysis, and pollutant detection. The fundamental design strategies of 2DM are discussed with emphasis on their physicochemical properties, underlying mechanism and targeted applications in different scenarios. This review concludes with a perspective on the pressing challenges and emerging opportunities in 2DM-enabled wastewater treatment and water-quality monitoring. This review can help to elaborate the structure-processing-property relationship of 2DM, and aims to guide the design of next-generation 2DM systems for the development of selective, multifunctional, programmable, and even intelligent water technologies. The global significance of clean water for future generations sheds new light and much inspiration in this rising field to enhance the efficiency and affordability of water treatment and secure a global water supply in a growing portion of the world.

A synergistic antibacterial platform: combining mechanical and photothermal effects based on Van-MoS2-Au nanocomposites

Herein, we successfully developed a new multifunctional antibacterial system, which combined mechano-bactericidal (Au-nanostars) and photothermal (MoS₂) mechanism. Meanwhile, the targeting molecule of vancomycin was modified on the surface of MoS₂-Au nanocomposites (Van-MoS₂-Au), that generally yield high efficiency in antibacterial performance due to their effective working radii. Van-MoS₂-Au nanocomposites were capable of completely destroying both gram-negative (E. coli) and gram-positive (B. subtilis) bacteria under 808 NIR laser irradiation for 20 min, and nearly no bacterial growth was detected after 12 h incubation. Moreover, these nanocomposites could destruct the refractory biofilm as well, which was a much more difficult medical challenge. The new antibacterial nanomaterials might offer many biomedical applications because of the biocompatibility and strong antibacterial ability.

A rose bengal/graphene oxide/PVA hybrid hydrogel with enhanced mechanical properties and light-triggered antibacterial activity for wound treatment

The numerous advantages of hydrogel make it possible to apply as dressing. However, it is challenging in designing hydrogels with desired antibacterial activity and enhanced mechanical properties at the same time. Herein, a graphene oxide/rose bengal/polyvinyl alcohol hybrid hydrogel (β-GO/RB/PVA HD) is prepared by freezing and thawing a mixed polyvinyl alcohol (PVA) solution of rose bengal (RB) immobilized with chitosan microspheres (CM) and a modified graphene oxide network (β-GO). The mechanical properties and light-triggered antibacterial activity of hydrogel are systematically evaluated. The β-GO inorganic network interpenetrate into the PVA porous structure, which significantly improves the mechanical properties of hydrogel. The hyperthermia generated by β-GO under 808 nm light irradiation combined with reactive oxygen species (ROS) produced by RB under 550 nm light irradiation give rise to excellent antibacterial activity requiring irradiation for only 10 min as demonstrated by our experiments conducted in vitro and in vivo. Meanwhile, β-GO/RB/PVA HD exhibits outstanding biocompatibility and water-absorbing capacity. More importantly, the hybrid hydrogel can significantly accelerate bacteria-accompanied wound healing. The results demonstrated that the hybrid hydrogel could be a promising wound dressing for preventing bacterial infection.

Recent advances on TMDCs for medical diagnosis

Transition metal dichalcogenides (TMDCs), such as MoS₂ and WS₂, have attracted much attention in biosensing and bioimaging due to its excellent stability, biocompatibility, high specific surface area, and wide varieties. In this review, we overviewed the application of TMDCs in biosensing and bioimaging. Firstly, the synthesis methods and surface functionalization methods of TMDCs were summarized. Secondly, according to the working mechanism, we classified and gave a detailed account of the latest research progress of TMDC-based biosensing for the detection of the enzyme, DNA, and other biological molecules. Then, we outlined the recent progress of applying TMDCs in bio-imaging, including fluorescence, X-ray computed tomographic, magnetic response imaging, photographic and multimodal imaging, respectively. Finally, we discussed the future challenges and development direction of the application of TMDCs in medical diagnosis. Also, we put forward our view on the opportunity of TMDCs in the big data of modern medical diagnosis.

Molybdenum disulfide nanosheets: From exfoliation preparation to biosensing and cancer therapy applications

Over the past few decades, nanotechnology has developed rapidly. Various nanomaterials have been gradually applied in different fields. As a kind of two-dimensional (2D) layered nanomaterial with a graphene-like structure, molybdenum disulfide (MoS₂) nanosheets have broad research prospects in the fields of tumor photothermal therapy, biosensors and other biomedical fields because of their unique band gap structure and physical, chemical and optical properties. In this paper, the latest research progress on MoS₂ is briefly summarized. Several commonly used exfoliation methods for the preparation of MoS₂ nanosheets are reviewed based on the studies in the past five years. Additionally, the current research status of MoS₂ nanosheets in the field of biomedicine is introduced. At the end of this review, a brief overview of the limitations of MoS₂ research and its future prospects in the field of biomedicine is also provided.

2D nanostructures beyond graphene: preparation, biocompatibility and biodegradation behaviors

The research advances of the preparation, biocompatibility and biodegradation of 2D nanomaterials are introduced. The prospects and challenges of the biomedical applications of 2D nanomaterials are summarized.

Current and future envision on developing biosensors aided by 2D molybdenum disulfide (MoS2) productions

Two-dimensional (2D) layered nanomaterials have triggered an intensive interest due to the fascinating physiochemical properties with the exceptional physical, optical and electrical characteristics that transpired from the quantum size effect of their ultra-thin structure. Among the family of 2D nanomaterials, molybdenum disulfide (MoS₂) features distinct characteristics related to the existence of direct energy bandgap, which significantly lowers the leakage current and surpasses other 2D materials. In this overview, we expatiate the novel strategies to synthesize MoS₂ that cover techniques such as liquid exfoliation, chemical vapour deposition, mechanical exfoliation, hydrothermal reaction, and Van Der Waal epitaxial growth on the substrate. We extend the discussion on the recent progress in biosensing applications of the produced MoS₂, highlighting the important surface-to-volume of ultrathin MoS₂ structure, which enhances the overall performance of the devices. Further, envisioned the missing piece with the current MoS₂-based biosensors towards developing the future strategies.

An array consisting of glycosylated quantum dots conjugated to MoS2 nanosheets for fluorometric identification and quantitation of lectins and bacteria

A fluorescent array based on the use of saccharide-functionalized multicolored quantum dots (s-QDs) and of 4-mercaptophenylboronic acid-functionalized MoS₂ nanosheets (PBA-MoS₂) was constructed for multiple identification and quantitation of lectins and bacteria. In this array, the fluorescence of the s-QDs is quenched by the PBA-MoS₂ nanosheets. In the presence of multiple lectins, s-QDs differentially detach from the surface of PBA-MoS₂ nanosheets, producing distinct fluorescence response patterns due to both quenching and enhancement of fluorescence. By analyzing the fluorescence responses with linear discriminant analysis, multiple lectins and bacteria were accurately identified with 100% accuracy. The limits of detection of Concanavalin A, Pisum sativum agglutinin, Peanut agglutinin, and Ricius communis I agglutinin are as low as 3.7, 8.3, 4.2 and 3.9 nM, respectively. The array has further been evidenced to be potent for distinguishing and quantifying different bacterial species by recognizing their surface lectins. The detection limits of Escherichia coli and Enterococcus faecium are 87 and 66 cfu mL^-1, respectively. Graphical abstract Schematic of a fluorometric array based on the use of saccharides-functionalized quantum dots (s-QDs) and 4-mercaptophenylboronic acid-functionalized MoS₂ (PBA- MoS₂) nanosheets. This array was successfully applied to simultaneously analysis of lectins, bacteria in real samples with high sensitivity and accuracy.

A Gold/Silver Hybrid Nanoparticle for Treatment and Photoacoustic Imaging of Bacterial Infection

Ag+ ions are a well-known antibacterial agent, and Ag nanoparticles act as a reservoir of these Ag+ ions for targeted therapy of bacterial infections. However, there are no tools to effectively trigger and monitor the release of Ag+ ions from Ag nanoparticles. Photoacoustic (PA) imaging is an emerging noninvasive imaging tool, and gold nanorods (AuNRs) are an excellent contrast agent for PA imaging. In this work, we developed Au/Ag hybrid nanoparticles by coating AuNRs with silver (Ag), which decreased their photoacoustic signal. The as-prepared, Ag-coated Au nanorods (Au/AgNRs) are stable under ambient conditions, but the addition of ferricyanide solution (1 mM) results in oxidative etching of the silver shell. The PA contrast is simultaneously recovered as the silver is released, and this PA signal offers noninvasive monitoring of localized release of Ag+ ions. The released Ag+ ions exhibit a strong bactericidal efficacy similar to equivalent free Ag+ ions (AgNO3), and the nanoparticles killed >99.99% of both (Gram-positive) methicillin-resistant Staphylococcus aureus (MRSA, 32 μM Ag+ equivalent) and (Gram-negative) Escherichia coli (8 μM Ag+ equivalent). The theranostic potential of these nanoparticles was demonstrated in a pilot in vivo study. Mice were inoculated with MRSA and Au/AgNRs were subcutaneously implanted followed by silver etching. There was a 730% increase in the PA signal ( p < 0.01) pre- and post-etching, and the bacterial counts in infected tissues of the treated group were reduced by 1000-fold (log CFU/g = 4.15 vs 7.75) versus the untreated control; this treatment efficacy was confirmed with histology. We further showed that these hybrid nanoparticles could release Ag+ after stimulation by reactive oxygen species including hydrogen peroxide and peroxynitrite. These hybrid Au/Ag nanoparticles are a useful theranostic agent for the photoacoustic imaging and treatment of bacterial infections.

MoS2 nanosheets with peroxidase mimicking activity as viable dual-mode optical probes for determination and imaging of intracellular hydrogen peroxide

The authors describe a dual-mode (colorimetric-fluorometric) nanoprobe for H₂O₂ that was fabricated by covering molybdenum disulfide nanosheets (MoS₂ NS) with ortho-phenylenediamine (OPD). The probe (OPD-MoS₂ NS) was applied to the optical determination of H₂O₂, to the quantitation of cell numbers, and to the detection of intracellular concentrations of H₂O₂. Oxidation by H₂O₂ leads to a colored and fluorescent product (oxidized OPD) with absorption/excitation/fluorescence peaks at 450/450/557 nm. The nanoprobe can detect H₂O₂ in down to 500 nM concentrations, and HeLa cells at levels of 100 cells mL^-1. The detection limit for intracellular H₂O₂ is in the 5.5 to 12.6 μM concentration range when the method is applied to cells at levels of 10²-10⁶ cells mL^-1. Due to its good biocompatibility and easy cell uptake, the nanoprobe also permits sensitive fluorometric imaging of intracellular H₂O₂. It can also comparatively discriminate the change of intracellular oxidation state in living cancerous and normal cells. Graphical abstract Editor, we provided image with high resolution. Please find it in a folder name "MIAC-D-18-00081" in the FTP site. A dual-mode (colorimetric-fluorometric) detection nanoplatform based on OPD-modified MoS₂ nanosheets is used to quantitatively detect H₂O₂, cell numbers and intracellular H₂O₂. The MoS₂ nanoprobes also permit sensitive fluorescence imaging of intracellular H₂O₂, and can discriminate intracellular oxide states in living cancerous and normal cells.

Electrophoretic Deposited Stable Chitosan@MoS2 Coating with Rapid In Situ Bacteria-Killing Ability under Dual-Light Irradiation

Developing in situ disinfection methods in vivo to avoid drug-resistant bacteria and tissue toxicity is an urgent need. Here, the photodynamic and photothermal properties of the chitosan-assisted MoS₂ (CS@MoS₂ ) hybrid coating are simultaneously inspired to endow metallic Ti implants with excellent surface self-antibacterial capabilities. This coating, irradiated by only 660 nm visible light (VL) for 10 min, exhibits an antibacterial efficacy of 91.58% and 92.52% against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), respectively. The corresponding value is 64.67% and 57.44%, respectively, after irradiation by a single 808 nm near infrared light for the same amount of time. However, the combined irradiation using both lights can significantly enhance the efficiency up to 99.84% and 99.65% against E. coli and S. aureus, respectively, which can be ascribed to the synergistic effects of photodynamic and photothermal actions. The former produces single oxygen species under 660 nm VL while the latter induces a rise in temperature of implants, which can inhibit the growth of both E. coli and S. aureus. The introduction of CS can also promote the biocompatibility of implants, which provides a facile, rapid, and safe in situ bacteria-killing method in vivo without needing a second surgery.

2D MoS2 Nanostructures for Biomedical Applications

MoS₂ nanosheets, a typical kind of layered transition metal dichalcogenides with the 2D structure and many unique physical and chemical properties, have attracted a lot of research interests in various fields. Typically, MoS₂ nanosheets present similarities to graphene in terms of their large surface area and strong absorbance in near-infrared region, which in combination with their easily functionalized surface make them promising nanoplatforms in biomedical applications. Herein, the progress of MoS₂ nanosheets and their composites in the area of nanomedicine, with the emphasis on their synthesis and modification strategies, their biomedical applications in biosensing, imaging and therapy, as well as evaluations of their in vivo behaviors and toxicology profiles are summarized. Finally, the challenges and opportunities of applying MoS₂ -based nanomaterials in the biomedicine areas will be discussed.

Chemical sensing with 2D materials

During the last decade, two-dimensional materials (2DMs) have attracted great attention due to their unique chemical and physical properties, which make them appealing platforms for diverse applications in sensing of gas, metal ions as well as relevant chemical entities.

A novel polydentate ligand chromophore for simultaneously colorimetric detection of trace Ag+ and Fe3. SPECTROCHIMICA ACTA. PART A, MOLECULAR AND BIOMOLECULAR SPECTROSCOPY 2017;186:17-22. [PMID: 28600992 DOI: 10.1016/j.saa.2017.06.007]

A novel polydentate ligand chromophore, 3,6-di-(N-ethyl-N-ethoxyl phenylazo) acridine (EEPA), was identified and synthesized. After its structure was characterized by FTIR, ¹H NMR, mass spectra and element analyses, it was noted to find that there was a simultaneously colorimetric response to Ag⁺ and Fe³⁺ accompanying with different color changes, i.e., from brown to light purple for Ag⁺ and further to purple-red for Fe³⁺, respectively. Their different action mechanisms, a 1:2 complex mode for EEPA-Ag⁺ and 1:1 for EEPA-Fe³⁺, were investigated and confirmed by means of Job's plot and theoretical calculation. EEPA would be a potential colorimetric chemo-dosimeter for simultaneous detection of Ag⁺ and Fe³⁺ with the detection limits of 1.6nmol·L^-1 and 69nmol·L^-1, respectively.

Environmental Applications of 2D Molybdenum Disulfide (MoS2) Nanosheets

In an era of graphene-based nanomaterials as the most widely studied two-dimensional (2D) materials for enhanced performance of devices and systems in numerous environmental applications, molybdenum disulfide (MoS₂) nanosheets stand out as a promising alternative 2D material with many excellent physicochemical, biological, and mechanical properties that differ significantly from those of graphene-based nanomaterials, potentially leading to new environmental phenomena and novel applications. This Critical Review presents the latest advances in the use of MoS₂ nanosheets for important water-related environmental applications such as contaminant adsorption, photocatalysis, membrane-based separation, sensing, and disinfection. Various methods for MoS₂ nanosheet synthesis are examined, and their suitability for different environmental applications is discussed. The unique structure and properties of MoS₂ nanosheets enabling exceptional environmental capabilities are compared with those of graphene-based nanomaterials. The environmental implications of MoS₂ nanosheets are emphasized, and research needs for future environmental applications of MoS₂ nanosheets are identified.

Supramolecular Porphyrin Photosensitizers: Controllable Disguise and Photoinduced Activation of Antibacterial Behavior

A series of supramolecular photosensitizers were fabricated from porphyrin derivatives (Por) containing quaternary ammonium groups with cucurbit[7]uril (CB[7]) based on host-guest interactions. The antibacterial activity of Por in the dark could be turned off upon binding with CB[7], whereas the antibacterial activity under white-light illumination could be turned on. In addition, its antibacterial efficiency could be greatly enhanced by introducing metal ions. When Pd(II) was introduced into porphyrin, its antibacterial efficiency was enhanced from 40 to 100%. It should be noted that these small molecules showed little to no cytotoxicity toward mammalian cells even at concentrations higher than those under the antibacterial condition studied. This line of research will provide a strategy for germicides consisting of quaternary ammonium groups to fight against bacterial accumulation in the long term and holds huge potential for application in the real world.

Recent Advances in Ultrathin Two-Dimensional Nanomaterials

Since the discovery of mechanically exfoliated graphene in 2004, research on ultrathin two-dimensional (2D) nanomaterials has grown exponentially in the fields of condensed matter physics, material science, chemistry, and nanotechnology. Highlighting their compelling physical, chemical, electronic, and optical properties, as well as their various potential applications, in this Review, we summarize the state-of-art progress on the ultrathin 2D nanomaterials with a particular emphasis on their recent advances. First, we introduce the unique advances on ultrathin 2D nanomaterials, followed by the description of their composition and crystal structures. The assortments of their synthetic methods are then summarized, including insights on their advantages and limitations, alongside some recommendations on suitable characterization techniques. We also discuss in detail the utilization of these ultrathin 2D nanomaterials for wide ranges of potential applications among the electronics/optoelectronics, electrocatalysis, batteries, supercapacitors, solar cells, photocatalysis, and sensing platforms. Finally, the challenges and outlooks in this promising field are featured on the basis of its current development.

DNA Modified Fe3O4@Au Magnetic Nanoparticles as Selective Probes for Simultaneous Detection of Heavy Metal Ions

Driven by the urgent need to detect trace heavy metal ions in various real water samples, this article demonstrates for the first time an electrochemical biosensor based on DNA modified Fe₃O₄@Au magnetic nanoparticles (NPs). Three DNA probes are designed to contain certain mismatched base pairs. One is thiolated and modified on the surface of Fe₃O₄@Au NPs (DNA 1). The other two probes (DNA 2 and 3) are labeled with two independent electrochemical species. Stable structures of cytosine-Ag⁺-cytosine and thymine-Hg²⁺-thymine formed in the presence of Ag⁺ and Hg²⁺ can assist the hybridization of DNA 1/DNA 2 and DNA 1/DNA 3, which locate corresponding electrochemical species onto the surface of the magnetic NPs. The achieved nanocomposites are then used as selective electrochemical probes for the detection of heavy metal ions by recording the square wave voltammetry signals. Simultaneous detection of Ag⁺ and Hg²⁺ is demonstrated without significant interference, and their individual high sensitivities are fundamentally preserved, which meet the requirements of U.S. Environmental Protection Agency (USEPA). Furthermore, the proposed method has been challenged by various real water samples. The results confirm the DNA modified magnetic NPs based sensing method may have potential applications for the monitoring of heavy metal ions in real sample analysis.

Antibacterial and catalytic activities of biosynthesized silver nanoparticles prepared by using an aqueous extract of green coffee bean as a reducing agent

Spherical biogenic silver nanoparticles (AgNPs) were synthesized using aqueous green coffee bean extract as a reducing agent.