Microfluidic Generation of Porous Microcarriers for Three-Dimensional Cell Culture

Emerging Microfluidic Building Blocks for Cultured Meat Construction

Cultured meat aims to produce meat mass by culturing cells and tissues based on the muscle regeneration mechanism, and is considered an alternative to raising and slaughtering livestock. Hydrogel building blocks are commonly used as substrates for cell culture in tissue engineering and cultured meat because of their high water content, biocompatibility, and similar three-dimensional (3D) environment to the cellular niche in vivo. With the characteristics of precise manipulation of fluids, microfluidics exhibits advantages in the fabrication of building blocks with different structures and components, which have been widely applied in tissue regeneration. Microfluidic building blocks show promising prospects in the field of cultured meat; however, few reviews on the application of microfluidic building blocks in cultured meat have been published. This review outlines the recent status and prospects of the use of microfluidic building blocks in cultured meat. Starting with the introduction of cells and materials for cultured meat tissue construction, we then describe the diverse structures of the fabricated building blocks, including microspheres, microfibers, and microsphere-microfiber hybrid systems. Next, the stacking strategies for tissue construction are highlighted in detail. Finally, challenges and future prospects for developing microfluidic building blocks for cultured meat are discussed.

Facile and versatile PDMS-glass capillary double emulsion formation device coupled with rapid purification toward microfluidic giant liposome generation

The exceptional ability of liposomes to mimic a cellular lipid membrane makes them invaluable tools in biomembrane studies and bottom-up synthetic biology. Microfluidics provides a promising toolkit for creating giant liposomes in a controlled manner. Nevertheless, challenges associated with the microfluidic formation of double emulsions, as precursors to giant liposomes, limit the full exploration of this potential. In this study, we propose a PDMS-glass capillary hybrid device as a facile and versatile tool for the formation of double emulsions which not only eliminates the need for selective surface treatment, a well-known problem with PDMS formation chips, but also provides fabrication simplicity and reusability compared to the glass-capillary formation chips. These advantages make the presented device a versatile tool for forming double emulsions with varying sizes (spanning two orders of magnitude in diameter), shell thickness, number of compartments, and choice of solvents. We achieved robust thin shell double emulsion formation by operating the hybrid chip in double dripping mode without performing hydrophilic/phobic treatment a priori. In addition, as an alternative to the conventional, time-consuming density-based separation method, a tandem separation chip is developed to deliver double emulsions free of any oil droplet contamination in a continuous and rapid manner without any need for operator handling. The applicability of the device was demonstrated by forming giant liposomes using the solvent extraction method. This easy-to-replicate, flexible, and reliable microfluidic platform for the formation and separation of double emulsion templates paves the way for the high-throughput microfluidic generation of giant liposomes and synthetic cells, opening exciting avenues for biomimetic research. The presented giant liposome assembly line features a novel treatment-free hybrid chip for double emulsion formation coupled with a high throughput separation chip for sample purification.

Biomacromolecular hydrogel scaffolds from microfluidics for cancer therapy: A review

Traditional cancer treatment is confronted with the problem of limited therapeutic effect, tissue defects, and lack of drug screening. Hydrogel scaffolds from biological macromolecules based on microfluidic technology are a promising candidate, which can mimic tumor microenvironments to screen personalized drugs, promote the regeneration of healthy tissues, and deliver drugs for enhanced localized antitumor treatment. This review summarizes the latest research on the composition of biomacromolecular hydrogel scaffolds, the architecture of hydrogel scaffolds from microfluidic technology, and their application in cancer therapy, including anti-tumor drug screening, anti-tumor treatment, and anti-tumor treatment and tissue repair. In addition, the potential breakthroughs of this innovative platform in the clinical transformation of cancer therapy are further discussed. The insights revealed in this review are intended to guide the utilization of microfluidic technology-based biomacromolecular hydrogel scaffolds in cancer therapy.

Stimuli-responsive microcarriers and their application in tissue repair: A review of magnetic and electroactive microcarrier

Microcarrier applications have made great advances in tissue engineering in recent years, which can load cells, drugs, and bioactive factors. These microcarriers can be minimally injected into the defect to help reconstruct a good microenvironment for tissue repair. In order to achieve more ideal performance and face more complex tissue damage, an increasing amount of effort has been focused on microcarriers that can actively respond to external stimuli. These microcarriers have the functions of directional movement, targeted enrichment, material release control, and providing signals conducive to tissue repair. Given the high controllability and designability of magnetic and electroactive microcarriers, the research progress of these microcarriers is highlighted in this review. Their structure, function and applications, potential tissue repair mechanisms, and challenges are discussed. In summary, through the design with clinical translation ability, meaningful and comprehensive experimental characterization, and in-depth study and application of tissue repair mechanisms, stimuli-responsive microcarriers have great potential in tissue repair.

Microfluidic Engineering of Addressable Multicompartmental Microspheres for Multicellular Systems

With the advantages of high-throughput manufacturing and customizability, on-microsphere construction of in vitro multicellular analytical systems has garnered significant attention. However, achieving a precise, biocompatible cell arrangement and spatial signal analysis in hydrogel microspheres remains challenging. In this work, a microfluidic method is reported for the biocompatible generation of addressable supersegmented multicompartmental microspheres. Additionally, these microspheres are developed as novel label-free multicellular systems. In the microfluidic approach, controllable microfluidics is used to finely tune the internal microstructure of the microspheres, and the gas ejector ensures the biocompatibility of the preparation process. As a proof of concept, six- and twenty-compartment microspheres were obtained without the addition of any biohazardous reagents. For microsphere decoding, the visualization of two basic compartments can provide clues for identifying label-free cells due to the structural regularity of the microspheres. Finally, by encapsulating cells of different types, these microspheres as multicellular systems were successfully used for cell coculture and drug testing. These biocompatible, scalable, and analyzable microspheres will open up new prospects for biomedical analysis.

Hydrogel-Encapsulated Pancreatic Islet Cells as a Promising Strategy for Diabetic Cell Therapy

Islet transplantation has now become a promising treatment for insulin-deficient diabetes mellitus. Compared to traditional diabetes treatments, cell therapy can restore endogenous insulin supplementation, but its large-scale clinical application is impeded by donor shortages, immune rejection, and unsuitable transplantation sites. To overcome these challenges, an increasing number of studies have attempted to transplant hydrogel-encapsulated islet cells to treat diabetes. This review mainly focuses on the strategy of hydrogel-encapsulated pancreatic islet cells for diabetic cell therapy, including different cell sources encapsulated in hydrogels, encapsulation methods, hydrogel types, and a series of accessorial manners to improve transplantation outcomes. In addition, the formation and application challenges as well as prospects are also presented.

Advances in the application of extracellular vesicles derived from three-dimensional culture of stem cells

Stem cells (SCs) have been used therapeutically for decades, yet their applications are limited by factors such as the risk of immune rejection and potential tumorigenicity. Extracellular vesicles (EVs), a key paracrine component of stem cell potency, overcome the drawbacks of stem cell applications as a cell-free therapeutic agent and play an important role in treating various diseases. However, EVs derived from two-dimensional (2D) planar culture of SCs have low yield and face challenges in large-scale production, which hinders the clinical translation of EVs. Three-dimensional (3D) culture, given its ability to more realistically simulate the in vivo environment, can not only expand SCs in large quantities, but also improve the yield and activity of EVs, changing the content of EVs and improving their therapeutic effects. In this review, we briefly describe the advantages of EVs and EV-related clinical applications, provide an overview of 3D cell culture, and finally focus on specific applications and future perspectives of EVs derived from 3D culture of different SCs.

3D Printing of Bioactive Gel-like Double Emulsion into a Biocompatible Hierarchical Macroporous Self-Lubricating Scaffold for 3D Cell Culture

The interconnected hierarchically porous structures are of key importance for potential applications as substrates for drug delivery, cell culture, and bioscaffolds, ensuring cell adhesion and sufficient diffusion of metabolites and nutrients. Here, encapsulation of a vitamin C-loaded gel-like double emulsion using a hydrophobic emulsifier and soy particles was performed to develop a bioactive bioink for 3D printing of highly porous scaffolds with enhanced cell biocompatibility. The produced double emulsions suggested a mechanical strength with the range of elastic moduli of soft tissues possessing a thixotropic feature and recoverable matrix. The outstanding flow behavior and viscoelasticity broaden the potential of gel-like double emulsion to engineer 3D scaffolds, in which 3D constructs showed a high level of porosity and excellent shape fidelity with antiwearing and self-lubricating properties. Investigation of cell viability and proliferation using fibroblasts (NIH-3T3) within vitamin C-loaded gel-like bioinks revealed that printed 3D scaffolds offered brilliant biocompatibility and cell adhesion. Compared to scaffolds without encapsulated vitamin C, 3D scaffolds containing vitamin C showed higher cell viability after 1 week of cell proliferation. This work represented a systematic investigation of hierarchical self-assembly in double emulsions and offered insights into mechanisms that control microstructure within supramolecular structures, which could be instructive for the design of advanced functional tissues.

Application of colloidal photonic crystals in study of organoids

As alternative disease models, other than 2D cell lines and patient-derived xenografts, organoids have preferable in vivo physiological relevance. However, both endogenous and exogenous limitations impede the development and clinical translation of these organoids. Fortunately, colloidal photonic crystals (PCs), which benefit from favorable biocompatibility, brilliant optical manipulation, and facile chemical decoration, have been applied to the engineering of organoids and have achieved the desirable recapitulation of the ECM niche, well-defined geometrical onsets for initial culture, in situ multiphysiological parameter monitoring, single-cell biomechanical sensing, and high-throughput drug screening with versatile functional readouts. Herein, we review the latest progress in engineering organoids fabricated from colloidal PCs and provide inputs for future research.

Establishment of a gut-on-a-chip device with controllable oxygen gradients to study the contribution of Bifidobacterium bifidum to inflammatory bowel disease

Supplemental Bifidobacterium has been shown to aid in the prevention, alleviation, and treatment of inflammatory bowel disease (IBD), but the progression and mechanisms are largely unstudied, partly because of a lack of appropriate models. In vitro human gut models must accurately recreate oxygen concentration gradients consistent with those in vivo to mimic gene expression, metabolism, and host-microbiome interactions. A non-equipment-intensive and inexpensive method for constructing the gut-on-a-chip with physiological oxygen concentration gradients remains challenging. Here, we propose a simple strategy using numerical simulations in a dual-channel gut-on-a-chip to guide chip design and achieve controllable oxygen gradients. By varying the size of microchannels, blocking the oxygen penetration of the polydimethylsiloxane layer at a given location, and controlling the flow of hypoxic/aerobic media, this strategy creates steep gradients across the intestinal epithelium. IBD symptoms were induced on the chip by tumor necrosis factor-α and lipopolysaccharide treatment. Bifidobacterium bifidum has been validated to contribute to the stability of the intestinal epithelial barrier, including preventing epithelial barrier disruption and promoting the repair of damaged intestinal epithelial cell monolayers. These effects may be associated with the co-localization of Bifidobacterium bifidum and ZO-1. This simple but robust approach for designing microfluidic devices is applicable to various organs-on-chips in which fluid dynamics and concentration profiles between different media must be considered. With the customized chip, the integration of activated Bifidobacterium bifidum provides an initial step toward developing a multi-factorial IBD platform. The approach could be scaled up for disease modeling, high-throughput drug screening and personalized medicine.

Biomaterials based on hyaluronic acid, collagen and peptides for three-dimensional cell culture and their application in stem cell differentiation

In recent decades, three-dimensional (3D) cell culture technologies have been developed rapidly in the field of tissue engineering and regeneration, and have shown unique advantages and great prospects in the differentiation of stem cells. Herein, the article reviews the progress and advantages of 3D cell culture technologies in the field of stem cell differentiation. Firstly, 3D cell culture technologies are divided into two main categories: scaffoldless and scaffolds. Secondly, the effects of hydrogels scaffolds and porous scaffolds on stem cell differentiation in the scaffold category were mainly reviewed. Among them, hydrogels scaffolds are divided into natural hydrogels and synthetic hydrogels. Natural materials include polysaccharides, proteins, and their derivatives, focusing on hyaluronic acid, collagen and polypeptides. Synthetic materials mainly include polyethylene glycol (PEG), polyacrylic acid (PAA), polyvinyl alcohol (PVA), etc. In addition, since the preparation techniques have a large impact on the properties of porous scaffolds, several techniques for preparing porous scaffolds based on different macromolecular materials are reviewed. Finally, the future prospects and challenges of 3D cell culture in the field of stem cell differentiation are reviewed. This review will provide a useful guideline for the selection of materials and techniques for 3D cell culture in stem cell differentiation.

Microfluidic Formulation of Topological Hydrogels for Microtissue Engineering

Microfluidics has recently emerged as a powerful tool in generation of submillimeter-sized cell aggregates capable of performing tissue-specific functions, so-called microtissues, for applications in drug testing, regenerative medicine, and cell therapies. In this work, we review the most recent advances in the field, with particular focus on the formulation of cell-encapsulating microgels of small "dimensionalities": "0D" (particles), "1D" (fibers), "2D" (sheets), etc., and with nontrivial internal topologies, typically consisting of multiple compartments loaded with different types of cells and/or biopolymers. Such structures, which we refer to as topological hydrogels or topological microgels (examples including core-shell or Janus microbeads and microfibers, hollow or porous microstructures, or granular hydrogels) can be precisely tailored with high reproducibility and throughput by using microfluidics and used to provide controlled "initial conditions" for cell proliferation and maturation into functional tissue-like microstructures. Microfluidic methods of formulation of topological biomaterials have enabled significant progress in engineering of miniature tissues and organs, such as pancreas, liver, muscle, bone, heart, neural tissue, or vasculature, as well as in fabrication of tailored microenvironments for stem-cell expansion and differentiation, or in cancer modeling, including generation of vascularized tumors for personalized drug testing. We review the available microfluidic fabrication methods by exploiting various cross-linking mechanisms and various routes toward compartmentalization and critically discuss the available tissue-specific applications. Finally, we list the remaining challenges such as simplification of the microfluidic workflow for its widespread use in biomedical research, bench-to-bedside transition including production upscaling, further in vivo validation, generation of more precise organ-like models, as well as incorporation of induced pluripotent stem cells as a step toward clinical applications.

Microcarriers in application for cartilage tissue engineering: Recent progress and challenges

Successful regeneration of cartilage tissue at a clinical scale has been a tremendous challenge in the past decades. Microcarriers (MCs), usually used for cell and drug delivery, have been studied broadly across a wide range of medical fields, especially the cartilage tissue engineering (TE). Notably, microcarrier systems provide an attractive method for regulating cell phenotype and microtissue maturations, they also serve as powerful injectable carriers and are combined with new technologies for cartilage regeneration. In this review, we introduced the typical methods to fabricate various types of microcarriers and discussed the appropriate materials for microcarriers. Furthermore, we highlighted recent progress of applications and general design principle for microcarriers. Finally, we summarized the current challenges and promising prospects of microcarrier-based systems for medical applications. Overall, this review provides comprehensive and systematic guidelines for the rational design and applications of microcarriers in cartilage TE.

Multicompartmental Microcapsules for Enzymatic Cascade Reactions Prepared through Gas Shearing and Surface Gelation

Inspired by the structure of eukaryotic cells, multicompartmental microcapsules have gained increasing attention. However, challenges remain in the fabrication of "all-aqueous" (i.e., oil-free) microcapsules composed of accurately adjustable hierarchical compartments. This study reports on multicompartmental microcapsules with an innovative architecture. While multicompartmental cores of the microcapsules were fabricated through gas shearing, a shell was applied on the cores through surface gelation of alginate. Different from traditional multicompartmental microcapsules, thus obtained microcapsules have well-segregated compartments while the universal nature of the surface-gelation method allows us to finely tune the shell thicknesses of the microcapsules. The microcapsules are highly stable and cytocompatible and allow repeated enzymatic cascade reactions, which might make them of interest for complex biocatalysis or for mimicking physiological processes.

A Review of Optical Imaging Technologies for Microfluidics

Microfluidics can precisely control and manipulate micro-scale fluids, and are also known as lab-on-a-chip or micro total analysis systems. Microfluidics have huge application potential in biology, chemistry, and medicine, among other fields. Coupled with a suitable detection system, the detection and analysis of small-volume and low-concentration samples can be completed. This paper reviews an optical imaging system combined with microfluidics, including bright-field microscopy, chemiluminescence imaging, spectrum-based microscopy imaging, and fluorescence-based microscopy imaging. At the end of the article, we summarize the advantages and disadvantages of each imaging technology.

Droplet microfluidics-based biomedical microcarriers

Droplet microfluidic technology provides a new platform for controllable generation of microdroplets and droplet-derived materials. In particular, because of the ability in high-throughput production and accurate control of the size, structure, and function of these materials, droplet microfluidics presents unique advantages in the preparation of functional microcarriers, i.e., microsized liquid containers or solid particles that serve as substrates of biomolecules or cells. These microcarriers could be extensively applied in the areas of cell culture, tissue engineering, and drug delivery. In this review, we focus on the fabrication of microcarriers from droplet microfluidics, and discuss their applications in the biomedical field. We start with the basic principle of droplet microfluidics, including droplet generation regimes and its control methods. We then introduce the fabrication of biomedical microcarriers based on single, double, and multiple emulsion droplets, and emphasize the various applications of microcarriers in biomedical field, especially in 3D cell culture, drug development and biomedical detection. Finally, we conclude this review by discussing the limitations and challenges of droplet microfluidics in preparing microcarriers. STATEMENT OF SIGNIFICANCE: Because of its precise control and high throughput, droplet microfluidics has been employed to generate functional microcarriers, which have been widely used in the areas of drug development, tissue engineering, and regenerative medicine. This review is significant because it emphasizes recent progress in research on droplet microfluidics in the preparation and application of biomedical microcarriers. In addition, this review suggests research directions for the future development of biomedical microcarriers based on droplet microfluidics by presenting existing shortcomings and challenges.

Microfluidic arrays of dermal spheroids: a screening platform for active ingredients of skincare products

Organotypic micrometre-size 3D aggregates of skin cells (multicellular spheroids) have emerged as a promising in vitro model that can be utilized as an alternative of animal models to test active ingredients (AIs) of skincare products; however, a reliable dermal spheroid-based microfluidic (MF) model with a goal of in vitro AI screening is yet to be developed. Here, we report a MF platform for the growth of massive arrays of dermal fibroblast spheroids (DFSs) in a biomimetic hydrogel under close-to-physiological flow conditions and with the capability of screening AIs for skincare products. The DFSs formed after two days of on-chip culture and, in a case study, were used in a time-efficient manner for screening the effect of vitamin C on the synthesis of collagen type I and fibronectin. The computational simulation showed that the uptake of vitamin C was dominated by the advection flux. The results of screening the benchmark AI, vitamin C, proved that DFSs can serve as a reliable in vitro dermal model. The proposed DFS-based MF platform offers a high screening capacity for AIs of skincare products, as well as drug discovery and development in dermatology.

Boosting cell proliferation in three-dimensional polyacrylates/nanohydroxyapatite scaffolds synthesized by deep eutectic solvent-based emulsion templating

Among three-dimensional (3D) scaffold fabrication methods, porous polymers templated using high internal phase emulsions (HIPEs) have emerged as an attractive method due to the facile generation of interconnected porosity through a variety of synthetic routes. These include a bottom-up approach to selectively incorporate nanomaterials onto the inner walls in a nonaqueous environment. In this work, novel nonaqueous HIPEs made of different (meth)acrylate monomers and a deep eutectic solvent (DES) were formulated with nonfunctionalized nanohydroxyapatite (NHA), which also played the role of cosurfactant. Free radical polymerization of HIPEs yielded free-standing nanocomposites with 3D interconnected macroporosity and nonfunctionalized NHA selectively decorating the scaffolds' inner surface. The influence of different polymer functionalities, acrylate or methacrylate, their alkyl tail length, and the presence of NHA on MC3T3-E1 preosteoblast cell proliferation in vitro, reactive oxygen species (ROS) production and alkaline phosphatase (ALP) activity were evaluated. All materials presented promising biocompatibility, non-hemolytic activity, negligible inflammatory response along to remarkably enhanced cell proliferation (e.g., up to 160-fold cell proliferation increase compared with polystyrene plate) in vitro, which open the path for the development of scaffolds in regenerative medicine. It is noteworthy that polyHIPEs studied here were obtained using a green synthetic protocol where nonfunctionalized nanoparticles can be selectively incorporated into a scaffolds' inner walls. This versatile technique allows for the simple construction of 3D bioactive nanocomposite scaffolds with varied compositions for cell culture.

Microfluidics for Drug Development: From Synthesis to Evaluation

Drug development is a long process whose main content includes drug synthesis, drug delivery, and drug evaluation. Compared with conventional drug development procedures, microfluidics has emerged as a revolutionary technology in that it offers a miniaturized and highly controllable environment for bio(chemical) reactions to take place. It is also compatible with analytical strategies to implement integrated and high-throughput screening and evaluations. In this review, we provide a comprehensive summary of the entire microfluidics-based drug development system, from drug synthesis to drug evaluation. The challenges in the current status and the prospects for future development are also discussed. We believe that this review will promote communications throughout diversified scientific and engineering communities that will continue contributing to this burgeoning field.

Bioinspired design of amphiphilic particles with tailored compartments for dual-drug controlled release

Inspired by the phenomenon of water droplets hanging over rose petals, we propose a green interfacial self-assembly strategy to construct amphiphilic particles with controllable compartments for dual-drug encapsulation and controlled release. The method involves fabrication of "sticky" superhydrophobic materials, assembling superhydrophilic hydrogel beads with "sticky" superhydrophobic material into an amphiphilic particle, and amphiphilicity induced self-organization of several small amphiphilic particles into a large-sized amphiphilic multicompartmental particle. With the employment of this approach, amphiphilic particles with tailored sizes, controllable morphology, and tunable numbers of compartments are successfully constructed. The formation process and the underlying principle are further clarified. We finally investigate the potential application of the amphiphilic multicompartmental particles to load both hydrophilic and hydrophobic species in separated domains and release them in a controllable manner without interference. This novel approach may offer a new route to generate amphiphilic materials for the purpose of multidrug combination therapy, multiple-cell encapsulation, and so on.

Three-dimensional in vitro tissue culture models of brain organoids

Brain organoids are three-dimensional self-assembled structures that are derived from human induced pluripotent stem cells (hiPSCs). They can recapitulate the spatiotemporal organization and function of the brain, presenting a robust system for in vitro modeling of brain development, evolution, and diseases. Significant advances in biomaterials, microscale technologies, gene editing technologies, and stem cell biology have enabled the construction of human specific brain structures in vitro. However, the limitations of long-term culture, necrosis, and hypoxic cores in different culture models obstruct brain organoid growth and survival. The in vitro models should facilitate oxygen and nutrient absorption, which is essential to generate complex organoids and provides a biomimetic microenvironment for modeling human brain organogenesis and human diseases. This review aims to highlight the progress in the culture devices of brain organoids, including dish, bioreactor, and organ-on-a-chip models. With the modulation of bioactive molecules and biomaterials, the generated organoids recapitulate the key features of the human brain in a more reproducible and hyperoxic fashion. Furthermore, an outlook for future preclinical studies and the genetic modifications of brain organoids is presented.

Engineering liver microtissues for disease modeling and regenerative medicine

The burden of liver diseases is increasing worldwide, accounting for two million deaths annually. In the past decade, tremendous progress has been made in the basic and translational research of liver tissue engineering. Liver microtissues are small, three-dimensional hepatocyte cultures that recapitulate liver physiology and have been used in biomedical research and regenerative medicine. This review summarizes recent advances, challenges, and future directions in liver microtissue research. Cellular engineering approaches are used to sustain primary hepatocytes or produce hepatocytes derived from pluripotent stem cells and other adult tissues. Three-dimensional microtissues are generated by scaffold-free assembly or scaffold-assisted methods such as macroencapsulation, droplet microfluidics, and bioprinting. Optimization of the hepatic microenvironment entails incorporating the appropriate cell composition for enhanced cell-cell interactions and niche-specific signals, and creating scaffolds with desired chemical, mechanical and physical properties. Perfusion-based culture systems such as bioreactors and microfluidic systems are used to achieve efficient exchange of nutrients and soluble factors. Taken together, systematic optimization of liver microtissues is a multidisciplinary effort focused on creating liver cultures and on-chip models with greater structural complexity and physiological relevance for use in liver disease research, therapeutic development, and regenerative medicine.

The Construction and Application of Three-Dimensional Biomaterials

Biomaterials have been widely explored and applied in many areas, especially in the field of tissue engineering. The interface of biomaterials and cells has been deeply investigated. However, it has been demonstrated that conventional 2D biomaterials fail to maintain the 3D structures and phenotypes of cells, which is the result of their limited ability to mimic the latter's complex extracellular matrix. To overcome this challenge, cell cultivation dependent on 3D biomaterials has emerged as an alternative strategy to make the recovery of 3D structures and functions of cells possible. Thus, with the thriving development of 3D cell culture in tissue engineering, a holistic review of the construction and application of 3D biomaterials is desired. Here, recent developments in 3D biomaterials for tissue engineering are reviewed. An overview of various approaches to construct 3D biomaterials, such as electro-jetting/-spinning, micro-molding, microfluidics, and 3D bio-printing, is first presented. Their typical applications in constructing cell sheets, vascular structures, cell spheroids, and macroscopic cellular constructs are described as well. Following these two sections, the current status and challenges are analyzed, as well as the future outlook of 3D biomaterials for tissue engineering.

Bioinspired Helical Micromotors as Dynamic Cell Microcarriers

Micromotors have exhibited great potential in multidisciplinary nanotechnology, environmental science, and especially biomedical engineering due to their advantages of controllable motion, long lifetime, and high biocompatibility. Marvelous efforts focusing on endowing micromotors with novel characteristics and functionalities to promote their applications in biomedical engineering have been taken in recent years. Here, inspired by the flagellar motion of Escherichia coli, we present helical micromotors as dynamic cell microcarriers using simple microfluidic spinning technology. The morphologies of micromotors can be easily tailored because of the highly controllable and feasible fabrication process including microfluidic generation and manual dicing. Benefiting from the biocompatibility of the materials, the resultant helical micromotors could be ideal cell microcarriers that are suitable for cell seeding and further cultivation; the magnetic nanoparticle encapsulation imparts the helical micromotors with kinetic characteristics in response to mobile magnetic fields. Thus, the helical micromotors could be applied as dynamic cell culture blocks and further assembled to complex geometrical structures. The constructed structures out of cell-seeded micromotors could find practical potential in biomedical applications as the stack-shaped assembly embedded in the hydrogel may be used for tissue repairing and the tube-shaped assembly due to its resemblance to vascular structures in the microchannel for organ-on-a-chip study or blood vessel regeneration. These features manifest the possibility to broaden the biomedical application scope for micromotors.

Microfluidic Generation of Nanomaterials for Biomedical Applications

As nanomaterials (NMs) possess attractive physicochemical properties that are strongly related to their specific sizes and morphologies, they are becoming one of the most desirable components in the fields of drug delivery, biosensing, bioimaging, and tissue engineering. By choosing an appropriate methodology that allows for accurate control over the reaction conditions, not only can NMs with high quality and rapid production rate be generated, but also designing composite and efficient products for therapy and diagnosis in nanomedicine can be realized. Recent evidence implies that microfluidic technology offers a promising platform for the synthesis of NMs by easy manipulation of fluids in microscale channels. In this Review, a comprehensive set of developments in the field of microfluidics for generating two main classes of NMs, including nanoparticles and nanofibers, and their various potentials in biomedical applications are summarized. Furthermore, the major challenges in this area and opinions on its future developments are proposed.

Microfluidic technologies to engineer mesenchymal stem cell aggregates-applications and benefits

Three-dimensional cell culture and the forming multicellular aggregates are superior over traditional monolayer approaches due to better mimicking of in vivo conditions and hence functions of a tissue. A considerable amount of attention has been devoted to devising efficient methods for the rapid formation of uniform-sized multicellular aggregates. Microfluidic technology describes a platform of techniques comprising microchannels to manipulate the small number of reagents with unique properties and capabilities suitable for biological studies. The focus of this review is to highlight recent studies of using microfluidics, especially droplet-based types for the formation, culture, and harvesting of mesenchymal stem cell aggregates and their subsequent application in stem cell biology, tissue engineering, and drug screening. Droplet-based microfluidics can be used to form microgels as carriers for delivering cells and to provide biological cues to the target tissue so as to be minimally invasive. Stem cell-laden microgels with a shape-forming property can be used as smart building blocks by injecting them into the injured tissue thereby constituting the cornerstone of tissue regeneration.

Slip Molding for Precision Fabrication of Microparts

Microparts with precise sizes, custom shapes, and a wide selection of materials have various applications, including biomedical microelectromechanical systems (MEMS), drug delivery, single-cell studies, and tissue engineering. Janus microparts containing multiple components are also demonstrated for biomolecule analysis, cell-cell interaction studies, and self-assembly. Small-footprint, affordable, and rapid technologies to fabricate microparts with customized morphologies and a wide selection of materials are highly desired. This paper reports on a SlipChip-based microfluidic molding method to control the interface for the synthesis of microparts-on-demand (mPods) with fast and easy loading-slipping-solidification operations that do not require pumps, masks, or other auxiliary fluidic control instruments. This method is based on the relative movement of two microfluidic plates that are in close contact, and the size and shape of the microparts can be accurately controlled by the geometry of the microcavities imprinted on the contacting surfaces of these microfluidic plates. To demonstrate the capability of this method, mPods of different sizes and various shapes are presented with photosensitive resin via a photopolymerization reaction. The synthesis of two-layer Janus microparts is also demonstrated by a slip overmolding method. This SlipChip-based molding method can offer new opportunities for producing customized microparts with great flexibility for a broad spectrum of applications.

Recent advances in the use of microcarriers for cell cultures and their ex vivo and in vivo applications

Microcarriers are 100- to 300-micron support matrices that permit the growth of adherent cells in bioreactor systems. They have a larger surface area to volume ratio in comparison to single cell monolayers, enabling cost-effective cell production and expansion. Microcarriers are composed of a solid matrix that must be separated from expanded cells during downstream processing stages. The detachment method is chosen on the basis of several factors like cell type, microcarrier surface chemistry, cell confluency and degree of aggregation. The development of microcarriers with a range of physiochemical properties permit controlled cell and protein associations that hold utility for novel therapeutics. In this review, we provide an overview of the recent advances in microcarrier cell culture technology. We also discuss its significance as an ex vivo research tool and the therapeutic potential of newly designed microcarrier systems in vivo.

"On-the-Fly" Fabrication of Highly-Ordered Interconnected Cylindrical and Spherical Porous Microparticles via Dual Polymerization Zone Microfluidics

A microfluidic platform with dual photopolymerization zones has been developed for production of novel uniform interconnected porous particles with shapes imposed either by the geometry of the external capillary or by the thermodynamic minimization of interfacial area. Double w/o/w (water/oil/water) drops with well-defined internal droplet size and number were produced and then exposed to online photopolymerization to create the porous particles. Cylindrical interconnected porous particles were produced in a segmented flow where the drops took the shape of the capillary. The microfluidic setup included an extension capillary where the drops relaxed and conformed to their thermodynamically favored morphology. Window opening of the particles occurred "on-the-fly" during UV polymerization without using any offline auxiliary methods. A distinction was made between critically and highly packed arrangements in double drops. The window opening occurred consistently for highly packed spherical drops, but only for critically packed drops containing more than six internal cores at internal phase ratios as low as 0.35. The size and number of cores and shape and structure of double drops could be precisely tuned by the flow rate and by packing structure of the inner droplets.

The Horizon of the Emulsion Particulate Strategy: Engineering Hollow Particles for Biomedical Applications

With their hierarchical structures and the substantial surface areas, hollow particles have gained immense research interest in biomedical applications. For scalable fabrications, emulsion-based approaches have emerged as facile and versatile strategies. Here, the recent achievements in this field are unfolded via an "emulsion particulate strategy," which addresses the inherent relationship between the process control and the bioactive structures. As such, the interior architectures are manipulated by harnessing the intermediate state during the emulsion revolution (intrinsic strategy), whereas the external structures are dictated by tailoring the building blocks and solidification procedures of the Pickering emulsion (extrinsic strategy). Through integration of the intrinsic and extrinsic emulsion particulate strategy, multifunctional hollow particles demonstrate marked momentum for label-free multiplex detections, stimuli-responsive therapies, and stem cell therapies.

Gas-Shearing Fabrication of Multicompartmental Microspheres: A One-Step and Oil-Free Approach

Multicompartmental microparticles (MCMs) have attracted considerable attention in biomedical engineering and materials sciences, as they can carry multiple materials in the separated phases of a single particle. However, the robust fabrication of monodisperse, highly compartmental MCMs at the micro- and nanoscales remains challenging. Here, a simple one-step and oil-free process, based on the gas-flow-assisted formation of microdroplets ("gas-shearing"), is established for the scalable production of monodisperse MCMs. By changing the configuration of the needle system and gas flow in the spray ejector device, the oil-free gas-shearing process easily allows the design of microparticles consisting of two, four, six, and even eight compartments with a precise control over the properties of each compartment. As oils and surfactants are not used, the gas-shearing method is highly cytocompatible. The versatile applications of such MCMs are demonstrated by producing a magnetic microrobot and a biocompatible carrier for the coculturing of cells. This research suggests that the oil-free gas-shearing strategy is a reliable, scalable, and biofriendly process for producing MCMs that may become attractive materials for biomedical applications.

Micro-/Nanofluidics for Liquid-Mediated Patterning of Hybrid-Scale Material Structures

Various materials are fabricated to form specific structures/patterns at the micro-/nanoscale, which exhibit additional functions and performance. Recent liquid-mediated fabrication methods utilizing bottom-up approaches benefit from micro-/nanofluidic technologies that provide a high controllability for manipulating fluids containing various solutes, suspensions, and building blocks at the microscale and/or nanoscale. Here, the state-of-the-art micro-/nanofluidic approaches are discussed, which facilitate the liquid-mediated patterning of various hybrid-scale material structures, thereby showing many additional advantages in cost, labor, resolution, and throughput. Such systems are categorized here according to three representative forms defined by the degree of the free-fluid-fluid interface: free, semiconfined, and fully confined forms. The micro-/nanofluidic methods for each form are discussed, followed by recent examples of their applications. To close, the remaining issues and potential applications are summarized.

Droplet Microarray on Patterned Butterfly Wing Surfaces for Cell Spheroid Culture

Three-dimensional (3D) cell spheroids have a demonstrated value for in vitro biological research and therapeutics development. Attempts to this technique focus on the development of effective methods for fabricating cell spheroids. Here, inspired by the heterogeneously textured wettability bumps (with hydrophilic peaks and hydrophobic bases) of Stenocara beetle, we present a biotemplated substrate with wettable hydrogel arrays for culturing the cell spheroids. The biotemplates were Morpho butterfly wings with chitin and protein components, which could provide a natural superhydrophobic surface without any modification. The droplet microarrays could be formed for cell spheroid culture on this bioinspired wing substrate by using the hydrogel patterns to hanging droplets. The hanging drop culture method on hydrogel-covered wings has the advantages of high speed, uniform size, and controllable diameter for the formation of 3D cell spheroids. It was demonstrated that drugs produced distinct responses in the 3D cell spheroids compared to conventional two-dimensional cell cultures. As the presented system does not require complex instruments and chemical modifications, our method can simply construct the desired wettability substrates with high biocompatibility for cell culture, drug testing, and other biomedical applications.

Hierarchically porous composite microparticles from microfluidics for controllable drug delivery

Abdominal wall defect repair remains a major clinical need, and a particle-based controllable drug delivery system offers a solution to this problem. Here, we present a new type of hierarchically porous microparticles (HPMs) composed of poly(lactic-co-glycolic acid) (PLGA) and hollow mesoporous silica nanoparticles (HMSNs) for the delivery. The HPMs are generated by drying microfluidic emulsion templates of HMSNs-dispersed PLGA solution. The resultant HPMs have tailorable porous structures, that provide a three-hierarchy architecture for the controlled release of actives. The first hierarchy is formed for controlling the drug release via physical absorption as a result of the presence of the HMSNs in the HPMs. The second hierarchy channels with small pores scattered throughout the surface of the HPMs are formed during evaporation of the solvent. The third hierarchy with openings on the surface of the HPMs is formed as a result of the inner droplets leaking out of the double emulsion templates during the PLGA solidification. Thus, by manipulating the flow of solutions during the microfluidic emulsification, the porous structures of HPMs can be easily and precisely adjusted, and the loaded drugs are delivered at the required rate. These features of the HPMs make them ideal for repairing abdominal wall defects.

Microfluidic generation of egg-derived protein microcarriers for 3D cell culture and drug delivery

Microcarriers have a demonstrated value for biomedical applications, in particular for drug delivery and three-dimensional cell culture. Attempts to develop this technique tend to focus on the fabrication of functional microparticles by using convenient methods with innovative but accessible materials. Inspired by the process of boiling eggs in everyday life, which causes the solidification of egg proteins, we present a new microfluidic "cooking" approach for the generation of egg-derived microcarriers for cell culture and drug delivery. As the egg emulsion droplets are formed with exquisite precision during the microfluidic emulsification, the resultant egg microcarriers present highly monodisperse and uniform morphologies at the size range of hundred microns to one millimeter. Benefiting from the excellent biocompatibility of the egg protein components, the obtained microcarriers showed good performances of cell adherence and growth. In addition, after a freezing treatment, the egg microcarriers were shown to have interconnected porous structures throughout their whole sphere, could absorb and load different kinds of drugs or other active molecules, and work as microcarrier-based delivery systems. These features point to the potential value of the microfluidic egg microcarriers in biomedicine.

Generation and manipulation of hydrogel microcapsules by droplet-based microfluidics for mammalian cell culture

Hydrogel microcapsules provide miniaturized and biocompatible niches for three-dimensional (3D) in vitro cell culture. They can be easily generated by droplet-based microfluidics with tunable size, morphology, and biochemical properties. Therefore, microfluidic generation and manipulation of cell-laden microcapsules can be used for 3D cell culture to mimic the in vivo environment towards applications in tissue engineering and high throughput drug screening. In this review of recent advances mainly since 2010, we will first introduce general characteristics of droplet-based microfluidic devices for cell encapsulation with an emphasis on the fluid dynamics of droplet breakup and internal mixing as they directly influence microcapsule's size and structure. We will then discuss two on-chip manipulation strategies: sorting and extraction from oil into aqueous phase, which can be integrated into droplet-based microfluidics and significantly improve the qualities of cell-laden hydrogel microcapsules. Finally, we will review various applications of hydrogel microencapsulation for 3D in vitro culture on cell growth and proliferation, stem cell differentiation, tissue development, and co-culture of different types of cells.