High Conductive Two-Dimensional Covalent Organic Framework for Lithium Storage with Large Capacity

Redox-active, photoluminescent porous polymers based on spirofluorene-bridged N-heterotriangulenes and their feasibility as organic cathode materials

Novel microporous polymers were synthesized through Yamamoto polymerization of selectively brominated spirofluorene-bridged N-heterotriangulenes. Extensive characterization, including combustion analysis, ToF-SIMS, IR, and Raman spectroscopy, confirmed the elemental composition and integrity of the polymers. The amorphous polymers, observed by scanning electron microscopy as globular particles aggregating into larger structures, exhibited remarkable thermal stability (decomposition temperatures > 400 °C) and BET surface areas up to 690 m2 g-1. Dispersions of the tert-butyl-substituted polymer in different solvents displayed bathochromically shifted emission with remarkable solvatochromism. The polymer is reversibly oxidized at +3.81 V (vs. Li/Li+) in composite electrodes with carbon black and reaches specific capacities up to 26 mA h g-1 and excellent cycling stability when implemented as cathode material in lithium-ion batteries. Our results highlight the potential of spirofluorene-bridged N-heterotriangulenes as versatile building blocks for the development of functional redox-active porous polymers.

Fully Conjugated Covalent Triazine Framework Integrating Hexaazatrinaphthylene Unit as Anode Material for High-Performance Hybrid Lithium-Ion Capacitors

As a high-performance energy storage device consisting of a battery-type anode and a capacitor-type cathode, hybrid lithium-ion capacitors (HLICs) combine the advantages of high energy density of batteries and high power density of capacitors. However, the imbalance in electrochemical kinetics between the battery-type anode and the capacitor-type cathode hinders the further development of HLICs. Fully conjugated covalent organic frameworks have great potential as electrode materials for HLICs due to the designability of their structure. Herein, a fully conjugated covalent triazine framework (PT-CTF) integrating the hexaazatrinaphthylene unit was constructed, which provides abundant active sites (C═N and C═C groups) as the pseudocapacitive anode material for HLICs. And the connection of the triazine unit of PT-CTF improves the molecular conjugate degree, facilitating the transport of electrons. The fabricated PT-CTF||AC HLICs exhibit a high energy density (164.9 Wh kg-1 at 100 mA g-1), large power density (13.1 kW kg-1 at 4 A g-1), and excellent cycling capability (72% after 10 000 cycles at 2 A g-1).

Electrostatically Designing Materials and Interfaces

Collective electrostatic effects arise from the superposition of electrostatic potentials of periodically arranged (di)polar entities and are known to crucially impact the electronic structures of hybrid interfaces. Here, it is discussed, how they can be used outside the beaten paths of materials design for realizing systems with advanced and sometimes unprecedented properties. The versatility of the approach is demonstrated by applying electrostatic design not only to metal-organic interfaces and adsorbed (complex) monolayers, but also to inter-layer interfaces in van der Waals heterostructures, to polar metal-organic frameworks (MOFs), and to the cylindrical pores of covalent organic frameworks (COFs). The presented design ideas are straightforward to simulate and especially for metal-organic interfaces also their experimental implementation has been amply demonstrated. For van der Waals heterostructures, the needed building blocks are available, while the required assembly approaches are just being developed. Conversely, for MOFs the necessary growth techniques exist, but more work on advanced linker molecules is required. Finally, COF structures exist that contain pores decorated with polar groups, but the electrostatic impact of these groups has been largely ignored so far. All this suggest that the dawn of the age of electrostatic design is currently experienced with potential breakthroughs lying ahead.

Nanostructured Porous Polymer with Low Volume Expansion, Structural Distortion, and Gradual Activation for High and Durable Lithium Storage

Organic compounds exhibit great potential as sustainable, tailorable, and environmentally friendly electrode materials for rechargeable batteries. However, the intrinsic defects of organic electrodes, including solubility, low ionic conductivity, and restricted electroactivity sites, will inevitably decrease the cycling life and capacity. We herein designed and prepared nanostructured porous polymers (NPP) with a simple one-pot method to overcome the above defects. Theoretical calculations and experimental results demonstrate that the as-synthesized NPP exhibited low volume expansion, molecular-structural distortion, and a gradual function activation process during cycling, thus exhibiting superior, high, and durable lithium storage. The gradual molecular distortion during the lithium storage processes provides more redox-active sites for Li storage, increasing the Li-storage capacity. Ex situ spectrum studies reveal the redox reaction mechanism of Li storage and demonstrate a gradual activation process during the repeated charging/discharging until the full storage of 18 Li ions is achieved. Additionally, a real-time observation on the NPP anode by in situ transmission electron microscope reveals a slight volume expansion during the repeating lithiation and delithiation processes, ensuring its structural integrity during cycling. This quantitative work for high-durability lithium storage could be of immediate benefit for designing organic electrode materials.

Porous crystalline conjugated macrocyclic materials and their energy storage applications

Porous crystalline conjugated macrocyclic materials (CMMs) possess high porosity, tunable structure/function and efficient charge transport ability owing to their planar macrocyclic conjugated π-electron system, which make them promising candidates for applications in energy storage. In this review, we thoroughly summarize the timely development of porous crystalline CMMs in energy storage related fields. Specifically, we summarize and discuss their structures and properties. In addition, their energy storage applications, such as lithium ion batteries, lithium sulfur batteries, sodium ion batteries, potassium ion batteries, Li-CO2 batteries, Li-O2 batteries, Zn-air batteries, supercapacitors and triboelectric nanogenerators, are also discussed. Finally, we present the existing challenges and future prospects. We hope this review will inspire the development of advanced energy storage materials based on porous crystalline CMMs.

Co-Assembly of Polyoxometalates and Porphyrins as Anode for High-Performance Lithium-Ion Batteries

Polyoxometalates (POMs) have been considered one of the most promising anode candidates for lithium-ion batteries (LIBs) in virtue of their high theoretical capacity and reversible multielectron redox properties. However, the poor intrinsic electronic conductivity, low specific surface area, and high solubility in organic electrolytes hinder their widespread applications in LIBs. Herein, a novel hybrid nanomaterial is synthesized by co-assembling POMs and porphyrins (PMo12/CoTPyP) through a facile solvothermal method. The POM clusters are stabilized by porphyrin units through electrostatic interactions, which simultaneously realize the uniform dispersion of POMs and porphyrin units. Benefiting from the generated sub-1 nm channels for fast ion transport and the synergistic effect between evenly distributed PMo12 clusters and high-conductive CoTPyP units, the LIB based on the optimized PMo12/CoTPyP anode exhibits significantly improved Li+ storage capability as well as superior rate and cycling performance. The results of density functional theory simulations further reveal that the co-assembly of PMo12 and CoTPyP can accelerate the mobility of Li+ and electrons, which in turn promotes the enhancement of LIBs performance. This work paves a strategy for synthesizing POMs-based anode materials with simultaneously high dispersibility, redox activity, and stability.

Covalent organic frameworks and their composites for rechargeable batteries

Covalent organic frameworks (COFs), characterized by well-ordered pores, large specific surface area, good stability, high precision, and flexible design, are a promising material for batteries and have received extensive attention from researchers in recent years. Compared with inorganic materials, COFs can construct elastic frameworks with better structural stability, and their chemical compositions and structures can be precisely adjusted and functionalized at the molecular level, providing an open pathway for the convenient transfer of ions. In this review, the energy storage mechanism and unique superiority of COFs and COF composites as electrodes, separators and electrolytes for rechargeable batteries are discussed in detail. Special emphasis is placed on the relationship between the establishment of COF structures and their electrochemical performance in different batteries. Finally, this review summarizes the challenges and prospects of COFs and COF composites in battery equipment.

Ferrocene Appended Porphyrin-Based Bipolar Electrode Material for High-Performance Energy Storage

The versatile properties of bipolar organic electrode materials have attracted considerable attention in the field of electrochemical energy storage (EES). However, their practical application is hindered by their inherent limitations including low intrinsic electrical conductivity, low specific capacity, and high solubility. Herein, a bipolar organic molecule combining both porphyrin and ferrocene moieties (CuDEFcP) [5,15-bis(ethynyl)-10,20-di ferrocenyl porphinato]copper(II)) has been developed. It is proposed as a new organic electrode material with multifunctional application for rechargeable organic lithium-based batteries (ROLBs) and dual-ion organic symmetric batteries (SDIBs). Superior performance was delivered as cathode material in lithium based dual-ion batteries (LDIBs), with a high initial discharge capacity of 300 mAh. g-1 at 0.2 A. g-1 and a reversible capacity of 58 mAh. g-1 after 5000 cycles at 1 A. g-1. However, employing it as an anode material in lithium-ion batteries (LIBs), a reversible capacity of 295 mAh. g-1 at 0.2 A. g-1 was delivered. In SDIBs, in which CuDEFcP is used as both anode and cathode, an average discharge voltage of 2.4 V and an energy density of 261 Wh.kg-1 were achieved.

Structural and electronic properties of Li-adsorbed single and bilayer porphyrin sheets as an electrode material for energy storage devices - a DFT analysis

In this study, we adopt density functional theory (DFT) to investigate the structural and electronic properties of monolayer and bilayer 2-D porphyrin sheets (PS) of covalent organic frameworks (COFs) upon interaction with Li atoms as an electrode material for Li-ion batteries. Based on their mechanical properties, our systems exhibit remarkable stability. The adsorption of Li at various sites in the monolayer, including over and between the bilayers of PS, is investigated. Our results indicate that Li at site S3 has the highest adsorption energy, and Li is energetically preferred to intercalate within the bilayer rather than monolayers due to its high adsorption energies. Notably, the charge transfer remains consistent for both systems. The density of state distribution, charge density difference plots, spin density and the band structure results show that the PS has high electrical conductivity. Additionally, the reaction potential was carried out, and the negative reaction potential results demonstrate that the system undergoes a reduction reaction. The resultant theoretical capacity and the open circuit voltage highlight that the PS materials of COFs are an important step for use in the next generation high-performance lithium-ion batteries.

Recent advances in two-dimensional polymers: synthesis, assembly and energy-related applications

Two-dimensional polymers (2DPs) are a class of 2D crystalline polymer materials with definite structures, which have outstanding physical-chemical and electronic properties. They cleverly link organic building units through strong covalent bonds and can construct functional 2DPs through reasonable design and selection of different monomer units to meet various application requirements. As promising energy materials, 2DPs have developed rapidly in recent years. This review first introduces the basic overview of 2DPs, such as their historical development, inherent 2D characteristics and diversified topological advantages, followed by the summary of the typical 2DP synthesis methods recently (including "top-down" and "bottom-up" methods). The latest research progress in assembly and processing of 2DPs and the energy-related applications in energy storage and conversion are also discussed. Finally, we summarize and prospect the current research status, existing challenges, and future research directions of 2DPs.

All-Covalent Organic Framework Nanofilms Assembled Lithium-Ion Capacitor to Solve the Imbalanced Charge Storage Kinetics

Free-standing covalent organic framework (COFs) nanofilms exhibit a remarkable ability to rapidly intercalate/de-intercalate Li+ in lithium-ion batteries, while simultaneously exposing affluent active sites in supercapacitors. The development of these nanofilms offers a promising solution to address the persistent challenge of imbalanced charge storage kinetics between battery-type anode and capacitor-type cathode in lithium-ion capacitors (LICs). Herein, for the first time, custom-made COFBTMB-TP and COFTAPB-BPY nanofilms are synthesized as the anode and cathode, respectively, for an all-COF nanofilm-structured LIC. The COFBTMB-TP nanofilm with strong electronegative-CF3 groups enables tuning the partial electron cloud density for Li+ migration to ensure the rapid anode kinetic process. The thickness-regulated cathodic COFTAPB-BPY nanofilm can fit the anodic COF nanofilm in the capacity. Due to the aligned 1D channel, 2D aromatic skeleton and accessible active sites of COF nanofilms, the whole COFTAPB-BPY//COFBTMB-TP LIC demonstrates a high energy density of 318 mWh cm-3 at a high-power density of 6 W cm-3, excellent rate capability, good cycle stability with the capacity retention rate of 77% after 5000-cycle. The COFTAPB-BPY//COFBTMB-TP LIC represents a new benchmark for currently reported film-type LICs and even film-type supercapacitors. After being comprehensively explored via ex situ XPS, 7Li solid-state NMR analyses, and DFT calculation, it is found that the COFBTMB-TP nanofilm facilitates the reversible conversion of semi-ionic to ionic C-F bonds during lithium storage. COFBTMB-TP exhibits a strong interaction with Li+ due to the C-F, C=O, and C-N bonds, facilitating Li+ desolation and absorption from the electrolyte. This work addresses the challenge of imbalanced charge storage kinetics and capacity between the anode and cathode and also pave the way for future miniaturized and wearable LIC devices.

Covalent Organic Framework-based Solid-State Electrolytes, Electrode Materials, and Separators for Lithium-ion Batteries

The increasing global energy consumption has led to the rapid development of renewable energy storage technologies. Lithium-ion batteries (LIBs) have been extensively studied and utilized for reliable, efficient, and sustainable energy storage. Nevertheless, designing new materials for LIB applications with high capacity and long-term stability is highly desired but remains a challenging task. Recently, covalent organic frameworks (COFs) have emerged as superior candidates for LIB applications due to their high porosity, well-defined pores, highly customizable structure, and tunable functionalities. These merits enable the preparation of tailored COFs with predesigned redox-active moieties and suitable porous channels that can improve the lithium-ion storage and transportation. This review summarizes the recent progress in the development of COFs and their composites for a variety of LIB applications, including (quasi) solid-state electrolytes, electrode materials, and separators. Finally, the challenges and potential future directions of employing COFs for LIBs are also briefly discussed, further promoting the foundation of this class of exciting materials for future advances in energy-related applications.

Highly Conductive Covalent-Organic Framework Films

Chemically inert organic networks exhibiting electrical conductivity comparable to metals can advance organic electronics, catalysis, and energy storage systems. Covalent-organic frameworks (COFs) have emerged as promising materials for those applications due to their high crystallinity, porosity, and tunable functionality. However, their low conductivity has limited their practical utilization. In this study, copper-coordinated-fluorinated-phthalocyanine and 2,3,6,7-tetrahydroxy-9,10-anthraquinone-based COF (CuPc-AQ-COF) films with ultrahigh conductivity are developed. The COF films exhibit an electrical conductivity of 1.53 × 103 S m-1 and a Hall mobility of 6.02 × 102 cm2 V-1 s-1 at 298 K, reaching the level of metals. The films are constructed by linking phthalocyanines and anthraquinones through vapor-assisted synthesis. The high conductivity properties of the films are attributed to the molecular design of the CuPc-AQ-COFs and the generation of high-quality crystals via the vapor-assisted method. Density functional theory analysis reveals that an efficient donor-acceptor system between the copper-coordinated phthalocyanines and anthraquinones significantly promotes charge transfer. Overall, the CuPc-AQ-COF films set new records of COF conductivity and mobility and represent a significant step forward in the development of COFs for electronic, catalytic, and electrochemical applications.

Progress and Perspectives on Promising Covalent-Organic Frameworks (COFs) Materials for Energy Storage Capacity

In recent years, a new class of highly crystalline advanced permeable materials covalent-organic frameworks (COFs) have garnered a great deal of attention thanks to their remarkable properties, such as their large surface area, highly ordered pores and channels, and controllable crystalline structures. The lower physical stability and electrical conductivity, however, prevent them from being widely used in applications like photocatalytic activities and innovative energy storage and conversion devices. For this reason, many studies have focused on finding ways to improve upon these interesting materials while also minimizing their drawbacks. This review article begins with a brief introduction to the history and major milestones of COFs development before moving on to a comprehensive exploration of the various synthesis methods and recent successes and signposts of their potential applications in carbon dioxide (CO2 ) sequestration, supercapacitors (SCs), lithium-ion batteries (LIBs), and hydrogen production (H2 -energy). In conclusion, the difficulties and potential of future developing with highly efficient COFs ideas for photocatalytic as well as electrochemical energy storage applications are highlighted.

Recent Progress in Design Principles of Covalent Organic Frameworks for Rechargeable Metal-Ion Batteries

Covalent organic frameworks (COFs) are acknowledged as a new generation of crystalline organic materials and have garnered tremendous attention owing to their unique advantages of structural tunability, frameworks diversity, functional versatility, and diverse applications in drug delivery, adsorption/separation, catalysis, optoelectronics, and sensing, etc. Recently, COFs is proven to be promising candidates for electrochemical energy storage materials. Their chemical compositions and structures can be precisely tuned and functionalized at the molecular level, allowing a comprehensive understanding of COFs that helps to make full use of their features and addresses the inherent drawback based on the components and functions of the devices. In this review, the working mechanisms and the distinguishing advantages of COFs as electrodes for rechargeable Li-ion batteries are discussed in detail. Especially, principles and strategies for the rational design of COFs as advanced electrode materials in Li-ion batteries are systematically summarized. Finally, this review is structured to cover recent explorations and applications of COF electrode materials in other rechargeable metal-ion batteries.

In situ Electropolymerized 3D Microporous Cobalt-Porphyrin Nanofilm for Highly Effective Molecular Electrocatalytic Reduction of Carbon Dioxide

Electrocatalytic CO2 reduction reaction (CO2 RR) based on molecular catalysts, for example, cobalt porphyrin, is promising to enhance the carbon cycle and mitigate current climate crisis. However, the electrocatalytic performance and accurate evaluations remain problems because of either the low loading amount or the low utilization rate of the electroactive CoN4 sites. Herein a monomer is synthesized, cobalt(II)-5,10,15,20-tetrakis(3,5-di(thiophen-2-yl)phenyl)porphyrin (CoP), electropolymerized onto carbon nanotubes (CNTs) networks, affording a molecular electrocatalyst of 3D microporous nanofilm (EP-CoP, 2-3 nm thickness) with highly dispersed CoN4 sites. The new electrocatalyst shortens the electron transfer pathway, accelerates the redox kinetics of CoN4 sites, and improves the durability of the electrocatalytic CO2 RR. From the intrinsic redox behavior of CoN4 sites, the effective utilization rate is obtained as 13.1%, much higher than that of the monomer assembled electrode (5.8%), and the durability is also promoted dramatically (>40 h) in H-type cells. In commercial flow cells, EP-CoP can achieve a faradic efficiency for CO (FECO ) over 92% at an overpotential of 160 mV. At a higher overpotential of 620 mV, the working current density can reach 310 mA cm-2 with a high FECO of 98.6%, representing the best performance for electrodeposited molecular porphyrin electrocatalysts.

Advances and prospects of porphyrin derivatives in the energy field

At present, porphyrin is developing rapidly in the fields of medicine, energy, catalysts, etc. More and more reports on its application are being published. This paper mainly takes the ingenious utilization of porphyrin derivatives in perovskite solar cells, dye-sensitized solar cells, and lithium batteries as the background to review the design idea of functional materials based on the porphyrin structural unit in the energy sector. In addition, the modification and improvement strategies of porphyrin are presented by visually showing the molecular structures or the design synthesis routes of its functional materials. Finally, we provide some insights into the development of novel energy storage materials based on porphyrin frameworks.

Application of New COF Materials in Secondary Battery Anode Materials

Covalent organic framework materials (COFs), as a new type of organic porous material, not only have the characteristics of flexible structure, abundant resources, environmental friendliness, etc., but also have the characteristics of a regular structure and uniform pore channels, so they have broad application prospects in secondary batteries. Their functional group structure, type, and number of active sites play a crucial role in the performance of different kinds of batteries. Therefore, this article starts from these aspects, summarizes the application and research progress of the COF anode materials used in lithium-ion batteries, sodium-ion batteries, and potassium-ion batteries in recent years, discusses the energy storage mechanism of COF materials, and expounds the application prospects of COF electrodes in the field of energy storage.

Covalent Organic Frameworks as Model Materials for Fundamental and Mechanistic Understanding of Organic Battery Design Principles

Redox-active covalent organic frameworks (COFs) have recently emerged as advanced electrodes in polymer batteries. COFs provide ideal molecular precision for understanding redox mechanisms and increasing the theoretical charge-storage capacities. Furthermore, the functional groups on the pore surface of COFs provide highly ordered and easily accessible interaction sites, which can be modeled to establish a synergy between ex situ/in situ mechanism studies and computational methods, permitting the creation of predesigned structure-property relationships. This perspective integrates and categorizes the redox functionalities of COFs, providing a deeper understanding of the mechanistic investigation of guest ion interactions in batteries. Additionally, it highlights the tunable electronic and structural properties that influence the activation of redox reactions in this promising organic electrode material.

Salen-based porous aromatic frameworks with multi-active sites as anode materials for lithium-ion batteries

Porous organic polymers are considered as excellent candidates for the electrode materials in rechargeable battery due to their desirable properties including porosity, customizable structure, and intrinsic chemical stability. Herein a Salen-based porous aromatic framework (Zn/Salen-PAF) is synthesized through a metal directed method and further used as efficient anode materialfor lithium-ion battery. Attributing to the stable functional skeleton, Zn/Salen-PAF delivers a reversible capacity of 631 mAh·g^-1 at 50 mA·g^-1, a high-rate capability of 157 mAh·g^-1 at 20.0 A·g^-1 and a long-term cycling capacity of 218 mAh·g^-1 at 5.0 A·g^-1 even after 2000 cycles. Compared to the Salen-PAF without metal ions, Zn/Salen-PAF possesses better electrical conductivity and more active sites. X-ray photoelectron spectroscopy (XPS) investigation indicates that the coordination of Zn²⁺ with N₂O₂ unit not only improves the conjugation of the framework but also contributes to the in situ cross-sectional oxidation of the ligand during reaction, which results in the electron redistribution of oxygen atom and the formation of CO bonds.

Electrostatic Design of the Nanoscale Internal Surfaces of Porous Covalent Organic Frameworks

It is well established that the collective action of assemblies of dipoles determines the electronic structure of surfaces and interfaces. This raises the question, to what extent the controlled arrangement of polar units can be used to also tune the electronic properties of the inner surfaces of materials with nanoscale pores. In the present contribution, state-of-the-art density-functional theory calculations are used to show for the prototypical case of covalent organic frameworks (COFs) that this is indeed possible. Decorating pore walls with assemblies of polar entities bonded to the building blocks of the COF layers triggers a massive change of the electrostatic energy within the pores. This, inevitably, also changes the relative alignment between electronic states in the framework and in guest molecules and is expected to have significant impacts on charge separation in COF heterojunctions, on redox reactions in COFs-based electrodes, and on (photo)catalysis.

Long-Term Cycling Stability of Porphyrin Electrode for Li/Na Charge Storage at High Temperature

Bipolar redox organic compounds have been considered as potential next-generation electrode materials due to their sustainability, low cost and tunable structure. However, their development is still limited by the poor cycling stability and low energy density ascribed to high dissolution during cycling and the low conductivity of organic molecules. Herein, porphyrin-based bipolar organics of [5,10,15,20-tetrathienylporphinato] M^II (M=2 H, Cu (CuTTP)) are proposed as new stable organic electrodes. Enhanced cycling stability is obtained by a temperature-induced in situ polymerization strategy of porphyrin molecules. The resulting polymer exhibits excellent cycling stability up to 10 00 cycles even at a high current density (1000 mA g^-1 ) in organic lithium-/sodium-based charge storage devices at 50 °C. In a symmetrical cell using CuTTP as both cathode and anode material a discharge capacity of 72 mAh g^-1 is achieved after 600 cycles at 1000 mA g^-1 . This strategy would offer a new approach to developing stable energy storage bipolar materials in organic-based devices at high temperature.

Novel Environmentally Friendly Covalent Organic Framework/Polylactic Acid Composite Material with High Chemical Stability for Sand-Control Material

A new high-strength, thermally stable, and degradable covalent organic framework (COF) -modified polylactic acid fiber (PLA) material (COF-PLA) was constructed for reinforcing the PLA material, to be used to produce environmentally friendly sand barriers. The micrographs, structure, thermal stability, and photodegradation products of COF-PLA were investigated. The results indicated that the COF material was compatible with PLA, and that the COF-PLA material took on the merits of the COF, so that it had a more regular arrangement, smoother surface, and smaller size, and was more thermostable than PLA alone. The successful incorporation of the COF improved the thermal stability of PLA. The initial pyrolysis temperature of the COF-PLA material is 313.7 °C, higher than that of the PLA material at 297.5 °C. The photodegradation products of COF-PLA and PLA indicated that the COF and PLA materials were mixed in a complex manner. After photodegradation, the COF-PLA material can produce melamine molecules that can neutralize the lactic acid and CO2 produced by PLA, which can maintain the acid–base balance in sandy soil and is beneficial to plant growth. Therefore, COF-PLA degradation does not cause pollution, making it a promising sand-control material.

Phenediamine bridging phthalocyanine-based covalent organic framework polymers used as anode materials for lithium-ion batteries

In this study, phenediamine bridging phthalocyanine-based covalent organic framework materials (CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA) with increasingly-widening pore sizes are prepared by reacting cobalt octacarboxylate phthalocyanine with p-phenylenediamine (PDA), benzidine (BDA) and 4,4''-diamino-p-terphenyl (TDA), respectively. The effects of frame size on the morphology structure and its electrochemical properties were explored. X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) and transmission electron microscopy (TEM) images show that the pore sizes of the CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA are about 1.7 nm, 2.0 nm and 2.3 nm, respectively, which are close to the simulated results after geometric conformation optimization using Material Studio software. In addition, the specific surface areas of CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA are 62, 81 and 137 m² g^-1, respectively. With increase in the frame size, the specific surface area of the corresponding material increases, which is bound to produce different electrochemical behaviors. Consequently, the initial capacities of the CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA electrodes in lithium-ion batteries (LIBs) are 204, 251 and 382 mA h g^-1, respectively. As the charge and discharge processes continue, the active points in the electrode material are continuously activated, leading to a continuous increase in charge and discharge capacities. After 300 cycles, the CoTAPc-PDA, CoTAPc-BDA and CoTAPc-TDA electrodes exhibit capacities of 519, 680 and 826 mA h g^-1, respectively, and after 600 cycles, the capacities are maintained at 602, 701 and 865 mA h g^-1, respectively, with a stable capacity retention rate at a current density of 100 mA g^-1. The results show that the large-size frame structure materials have a larger specific surface area and more favorable lithium ion transmission channels, which produce greater active point utilization and smaller charge transmission impedance, thus showing larger charge and discharge capacity and superior rate capability. This study fully confirms that frame size is a key factor affecting the properties of organic frame electrodes, providing design ideas for the development of high-performance organic frame electrode materials.

Calix[4]arene-Decorated Covalent Organic Framework Conjugates for Lithium Isotope Separation

Lithium isotope separation has attracted extensive interest due to its important role in fusion and fission reactions. Up to now, it is still a great challenge to separate lithium isotopes (⁶Li and ⁷Li) in an efficient manner due to the low capture ability for lithium ions of related materials and highly similar physicochemical properties between lithium isotopes. In this work, three calix[4]arene-decorated crystalline covalent organic frameworks (COFs) with wave-like extension and AA-stacking configuration were designed and utilized for lithium adsorption and its isotope separation. Experimental studies show that these COFs exhibit an outstanding lithium adsorption capacity up to 94.66 mg·g^-1, which is about 2 times beyond that of adsorbents reported in the literature. The high adsorption capacity of COFs could be attributed to the abundant adsorption sites from calix[4]arene unit. More importantly, this study demonstrates for the first time that calixarene groups can separate lithium isotopes with an excellent separation factor up to 1.053 ± 0.002, comparable to the most successful solid-phase lithium separation adsorbent. The calculation based on density functional theory showed that calixarene played an important role in the lithium adsorption. Interestingly, the lithium isotope separation performance is mainly affected by the amine bridging units. This work demonstrated that calixarene COFs are promising adsorbents for lithium isotope separation.

Covalent Organic Frameworks (COFs) as Multi-Target Multifunctional Frameworks

Covalent organic frameworks (COFs), synthesized from organic monomers, are porous crystalline polymers. Monomers get attached through strong covalent bonds to form 2D and 3D structures. The adjustable pore size, high stability (chemical and thermal), and metal-free nature of COFs make their applications wider. This review article briefly elaborates the synthesis, types, and applications (catalysis, environmental Remediation, sensors) of COFs. Furthermore, the applications of COFs as biomaterials are comprehensively discussed. There are several reported COFs having good results in anti-cancer and anti-bacterial treatments. At the end, some newly reported COFs having anti-viral and wound healing properties are also discussed.

Organic Anode Materials for Lithium-Ion Batteries: Recent Progress and Challenges

In the search for novel anode materials for lithium-ion batteries (LIBs), organic electrode materials have recently attracted substantial attention and seem to be the next preferred candidates for use as high-performance anode materials in rechargeable LIBs due to their low cost, high theoretical capacity, structural diversity, environmental friendliness, and facile synthesis. Up to now, the electrochemical properties of numerous organic compounds with different functional groups (carbonyl, azo, sulfur, imine, etc.) have been thoroughly explored as anode materials for LIBs, dividing organic anode materials into four main classes: organic carbonyl compounds, covalent organic frameworks (COFs), metal-organic frameworks (MOFs), and organic compounds with nitrogen-containing groups. In this review, an overview of the recent progress in organic anodes is provided. The electrochemical performances of different organic anode materials are compared, revealing the advantages and disadvantages of each class of organic materials in both research and commercial applications. Afterward, the practical applications of some organic anode materials in full cells of LIBs are provided. Finally, some techniques to address significant issues, such as poor electronic conductivity, low discharge voltage, and undesired dissolution of active organic anode material into typical organic electrolytes, are discussed. This paper will guide the study of more efficient organic compounds that can be employed as high-performance anode materials in LIBs.

Molecular and Morphological Engineering of Organic Electrode Materials for Electrochemical Energy Storage

Organic electrode materials (OEMs) can deliver remarkable battery performance for metal-ion batteries (MIBs) due to their unique molecular versatility, high flexibility, versatile structures, sustainable organic resources, and low environmental costs. Therefore, OEMs are promising, green alternatives to the traditional inorganic electrode materials used in state-of-the-art lithium-ion batteries. Before OEMs can be widely applied, some inherent issues, such as their low intrinsic electronic conductivity, significant solubility in electrolytes, and large volume change, must be addressed. In this review, the potential roles, energy storage mechanisms, existing challenges, and possible solutions to address these challenges by using molecular and morphological engineering are thoroughly summarized and discussed. Molecular engineering, such as grafting electron-withdrawing or electron-donating functional groups, increasing various redox-active sites, extending conductive networks, and increasing the degree of polymerization, can enhance the electrochemical performance, including its specific capacity (such as the voltage output and the charge transfer number), rate capability, and cycling stability. Morphological engineering facilitates the preparation of different dimensional OEMs (including 0D, 1D, 2D, and 3D OEMs) via bottom-up and top-down methods to enhance their electron/ion diffusion kinetics and stabilize their electrode structure. In summary, molecular and morphological engineering can offer practical paths for developing advanced OEMs that can be applied in next-generation rechargeable MIBs.

Graphical abstract

Boosting the Capacity of Aqueous Li-Ion Capacitors via Pinpoint Surgery in Nanocoral-Like Covalent Organic Frameworks

Aqueous lithium storage devices are promising candidates for next-generation energy storage applications, featuring low-cost, safety, environmental benignness, and grid-scale merits. Developing reliable anode materials with fast Li⁺ diffusion is paramount to stimulate their development. Herein, the electrochemical performance and mechanism of a redox-active β-ketoenamine-linked covalent organic framework (COF) (2,6-diaminoanthraquinone and 2,4,6-triformylphloroglucinol COF, DAAQ-TFP-COF) for lithium storage in aqueous electrolyte are explored for the first time. Systematic studies demonstrate that, by the conversion of neutral COF into anionic COF via a pinpoint surgery on the β-ketoenamine linkage, the resultative COF shows doubled Li⁺ storage capacity (132 mAh g^-1 at 0.5 A g^-1 , 87% of theoretical specific capacity), good rate capability (108 mAh g^-1 at 10 A g^-1 ), and excellent cyclability in 1000 cycles. This pinpoint surgery can be promising in extending the electrochemical applications of β-ketoenamine-linked COFs. The Li⁺ storage mechanism is investigated by ex situ electron paramagnetic resonance, in situ/ex situ Fourier transform infrared investigations, and density functional theory calculations. As a proof of new concept, a novel aqueous lithium-ion capacitor assembled with DAAQ-TFP-COF anode delivers high specific capacitance of 224 F g^-1 (0.1 A g^-1 ), supercapacitor-level power density (≈4000 W kg^-1 ), and long cyclability.

Rational Construction of Yolk-Shell Bimetal-Modified Quinonyl-Rich Covalent Organic Polymers with Ultralong Lithium-Storage Mechanism

Covalent organic polymers are attracting more and more attention for energy storage devices due to their lightweight, molecular viable design, stable structure, and environmental benignity. However, low charge-carrier mobility of pristine covalent organic materials is the main drawback for their application in lithium-ion batteries. Herein, a yolk-shell bimetal-modified quinonyl-rich covalent organic material, Co@2AQ-MnO₂, has been designed and synthesized by in situ loading of petal-like nanosized MnO₂ and coordinating with Co centers, with the aim to improve the charge conductivity of the covalent organic polymer and activate its Li-storage sites. As investigated by in situ FT-IR, ex situ XPS, and electrochemical probing, the quinonyl-rich structure provides abundant redox sites (carbonyl groups and π electrons from the benzene ring) for lithium reaction, and the introduction of two types of metallic species promotes the charge transfer and facilitates more efficient usage of active energy-storage sites in Co@2AQ-MnO₂. Thus, the Co@2AQ-MnO₂ electrode exhibits good cycling performance with large reversible capacity and excellent rate performance (1534.4 mA h g^-1 after 200 cycles at 100 mA g^-1 and 596.0 mA h g^-1 after 1000 cycles at 1000 mA g^-1).

Porous organic polymers for Li-chemistry-based batteries: functionalities and characterization studies

Porous organic polymers (POPs), a versatile class of materials that possess many tunable properties such as high chemical absorptivity and ionic conductivity, are emerging candidate electrode materials, permselective membranes, ionic conductors, interfacial stabilizers and functional precursors to synthesize advanced porous carbon. Based on their crystal structure features, the emerging POPs can be classified into two subclasses: amorphous POPs (hyper cross-linked polymers, polymers with intrinsic microporosity, conjugated microporous polymers, porous aromatic frameworks, etc.) and crystalline POPs (covalent organic frameworks, etc.). This tutorial review provides a brief introduction of different types of POPs in terms of their classification and functions for tackling the remaining challenges in various types of Li-chemistry-based batteries. In situ and ex situ characterization studies are also discussed to highlight their importance and applicability for the structural investigation of POPs to reveal the underlying mechanism of POPs over the course of the electrochemical process. Although some revolutionary advances have been achieved, the development of POPs in Li-chemistry-based batteries is still in its infancy. Perspectives regarding future application and mechanistic insights of POPs in battery studies are outlined at the end.

Conductive Covalent Organic Frameworks with Conductivity- and Pre-Reduction-Enhanced Electrochemiluminescence for Ultrasensitive Biosensor Construction

Covalent organic frameworks (COFs) have attracted widespread attention in the electrochemiluminescence (ECL) field owing to their high load capacity of ECL luminophores and porous structures, but their ECL performance is still limited by the intrinsic poor conductivity (generally <10^-8 S m^-1). To address this shortcoming, we used 2,3,6,7,10,11-hexaaminotriphenylene (HATP) and 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) to synthesize a conductive COF (HHTP-HATP-COF, conductivity = 3.11 × 10^-4 S m^-1). Compared with HATP, HHTP, and low-conductive HHTP-DABZ-COF, HHTP-HATP-COF exhibited superior ECL performance, not only because HHTP-HATP-COF possessed massive ECL luminophores but also because its conductive porous framework accelerated charge transport in the whole framework and improved the utilization ratio of ECL luminophores. More interestingly, the ECL intensity of the HHTP-HATP-COF/S₂O₈^2- system was further improved after pre-reduction electrolysis due to the accumulation of HHTP-HATP-COF cation radicals. The experimental results showed that the ECL intensity of the HHTP-HATP-COF/S₂O₈^2- system after pre-reduction was about 1.64-, 3.96-, 6.88-, and 8.09-fold higher than those of HHTP-HATP-COF/S₂O₈^2-, HHTP-DABZ-COF/S₂O₈^2-, HHTP/S₂O₈^2-, and HATP/S₂O₈^2- systems, respectively. Considering the superior ECL property of the HHTP-HATP-COF/S₂O₈^2- system after pre-reduction, it was used as a high-efficient ECL beacon together with an aptamer/protein proximity binding-induced three-dimensional bipedal DNA walker to construct an ultrasensitive biosensor for thrombin detection, which displayed broad linearity (100 aM to 1 nM) with a detection limit of 62.1 aM. Overall, the work offered effective ways to increase ECL performance by the enhancement of conductivity and by the pre-reduction, proposing new ideas to design high-efficiency COF-based ECL materials and endowing conductive COFs with ECL biosensor application for the first time.

Antimicrobial Photosensitizing Material Based on Conjugated Zn(II) Porphyrins

The widespread use of antibiotics has led to a considerable increase in the resistance of microorganisms to these agents. Consequently, it is imminent to establish new strategies to combat pathogens. An alternative involves the development of photoactive polymers that represent an interesting strategy to kill microbes and maintain aseptic surfaces. In this sense, a conjugated polymer (PZnTEP) based on Zn(II) 5,10,15,20-tetrakis-[4-(ethynyl)phenyl]porphyrin (ZnTEP) was obtained by the homocoupling reaction of terminal alkyne groups. PZnTEP exhibits a microporous structure with high surface areas allowing better interaction with bacteria. The UV-visible absorption spectra show the Soret and Q bands of PZnTEP red-shifted by about 18 nm compared to those of the monomer. Also, the conjugate presents the two red emission bands, characteristic of porphyrins. This polymer was able to produce singlet molecular oxygen and superoxide radical anion in the presence of NADH. Photocytotoxic activity sensitized by PZnTEP was investigated in bacterial suspensions. No viable Staphylococcus aureus cells were detected using 0.5 µM PZnTEP and 15 min irradiation. Under these conditions, complete photoinactivation of Escherichia coli was observed in the presence of 100 mM KI. Likewise, no survival was detected for E. coli incubated with 1.0 µM PZnTEP after 30 min irradiation. Furthermore, polylactic acid surfaces coated with PZnTEP were able to kill efficiently these bacteria. This surface can be reused for at least three photoinactivation cycles. Therefore, this conjugated photodynamic polymer is an interesting antimicrobial photoactive material for designing and developing self-sterilizing surfaces.

Covalent organic frameworks as multifunctional materials for chemical detection

Sensitive and selective detection of chemical and biological analytes is critical in various scientific and technological fields. As an emerging class of multifunctional materials, covalent organic frameworks (COFs) with their unique properties of chemical modularity, large surface area, high stability, low density, and tunable pore sizes and functionalities, which together define their programmable properties, show promise in advancing chemical detection. This review demonstrates the recent progress in chemical detection where COFs constitute an integral component of the achieved function. This review highlights how the unique properties of COFs can be harnessed to develop different types of chemical detection systems based on the principles of chromism, luminescence, electrical transduction, chromatography, spectrometry, and others to achieve highly sensitive and selective detection of various analytes, ranging from gases, volatiles, ions, to biomolecules. The key parameters of detection performance for target analytes are summarized, compared, and analyzed from the perspective of the detection mechanism and structure-property-performance correlations of COFs. Conclusions summarize the current accomplishments and analyze the challenges and limitations that exist for chemical detection under different mechanisms. Perspectives on how future directions of research can advance the COF-based chemical detection through innovation in novel COF design and synthesis, progress in device fabrication, and exploration of novel modes of detection are also discussed.

Two-Dimensional Polymers and Polymerizations

Synthetic chemists have developed robust methods to synthesize discrete molecules, linear and branched polymers, and disordered cross-linked networks. However, two-dimensional polymers (2DPs) prepared from designed monomers have been long missing from these capabilities, both as objects of chemical synthesis and in nature. Recently, new polymerization strategies and characterization methods have enabled the unambiguous realization of covalently linked macromolecular sheets. Here we review 2DPs and 2D polymerization methods. Three predominant 2D polymerization strategies have emerged to date, which produce 2DPs either as monolayers or multilayer assemblies. We discuss the fundamental understanding and scope of each of these approaches, including: the bond-forming reactions used, the synthetic diversity of 2DPs prepared, their multilayer stacking behaviors, nanoscale and mesoscale structures, and macroscale morphologies. Additionally, we describe the analytical tools currently available to characterize 2DPs in their various isolated forms. Finally, we review emergent 2DP properties and the potential applications of planar macromolecules. Throughout, we highlight achievements in 2D polymerization and identify opportunities for continued study.

Superlithiation Performance of Covalent Triazine Frameworks as Anodes in Lithium-Ion Batteries

Organics with the merit of renewability have been viewed as the promising alternative of inorganic electrode materials in lithium-ion batteries, but most of them display inferior performance due to the sluggish ion/electron diffusion and the potential dissolution in aprotic electrolytes. Here, covalent triazine frameworks (CTFs-1), full of vertical pores and layered spaces for Li⁺ transfer, have been synthesized with p-dicyanobenzene as the monomer by a facile two-step method including a prepolymerization with CF₃SO₃H as the catalyst and deep polymerization in molten ZnCl₂. CTFs-1-400, obtained at the deep polymerization temperature of 400 °C, exhibits the superlithiation property with the specific capacities of 1626 mA h g^-1 at 25 °C and 1913 mA h g^-1 at 45 °C at 100 mA g^-1, indicating the formation of Li₆C₆/Li₆C₃N₃ in the reduction process. Electrochemical analysis and density functional theory calculation indicate that the ultrahigh capacity is mainly contributed by the capacitance of micropores and the redox capacity of benzene and triazine rings. Moreover, CTFs-1-400 displays the specific capacity of 740 mA h g^-1 for 1000 cycles at 1 A g^-1 with almost no capacity fading.

A Novel Salen-based Porous Framework Polymer as Durable Anode for Lithium-Ion Storage

Organic electrode materials with abundant resources, environmental friendliness and recyclability play a crucial role in rechargeable lithium-ion batteries (LIBs). However, the inferior electrical conductivity and unsatisfactory long-term cycling performance seriously impede their large-scale application in LIBs. Herein, a novel salen-based porous framework polymer (SPP) with a large conjugated skeleton was constructed and utilized as anode for LIBs. Owing to its unique architecture with a large conjugated skeleton facilitating the electron transport, rich pores accelerating the organic electrolyte infiltration, and stable skeleton structure improving the long-term cycling performance, SPP delivered a high specific capacity of 337 mA h g^-1 at 0.1 C (1 C=250 mA g^-1 ) after 100 cycles, and robust rate capacity of 95.5 mA h g^-1 at 32 C. Importantly, an impressive long-term cycling performance with a storage capacity of 155.7 mA h g^-1 at 8 C after 4000 cycles was obtained, showing a durable cyclic stability of SPP. Furthermore, the lithium storage mechanism of SPP was evaluated by ex-situ X-ray photoelectron spectroscopy, manifesting that the multiple active sites of C=N, -OH, and benzene ring were responsible for the superior lithium storage performance. The novel SPP presented in this work should be a promising organic electrode for energy storage applications.

Two-Dimensional Organic/Inorganic Hybrid Nanosheet Electrodes for Enhanced Electrical Conductivity toward Stable and High-Performance Sodium-Ion Batteries

To investigate the effect of electrical conductivity on the energy-storage characteristics of anode materials in sodium-ion batteries, covalent organic nanosheets (CONs) are hybridized with highly conductive graphene nanosheets (GNs) via two different optimized synthesis routes, that is, reflux and solvothermal methods. The reflux-synthesized hybrid shows a well-overlapped 2D structure, whereas the solvothermally prepared hybrid forms a segregated phase in which the contact area between the CONs and GNs is reduced. These two hybrids synthesized by facile methods are fully characterized, and the results reveal that their energy-storage properties can be significantly improved by enhancing the electrical conductivity via the formation of a well-overlapped structure between CONs and GNs. The discharge capacity and rate capability of the reflux-synthesized hybrid was considerably larger than that of the bare CONs, highlighting that the improvement in the charge-carrier transport properties can improve the accessibility of Na ions to the surface of the hybrids. This synthetic methodology can be extended to the fabrication of high-performance anodes for Na-ion batteries.