Stimuli-Responsive Reversible Two-Level Adhesion from a Structurally Dynamic Shape-Memory Polymer

Adhesion Evolution: Designing Smart Polymeric Adhesive Systems with On-Demand Reversible Switchability

Smart polymeric switchable adhesives represent a rapidly emerging class of advanced materials, exhibiting the ability to undergo on-demand transitioning between "On" and "Off" adhesion states. By selectively tuning external stimuli triggers (including temperature, light, electricity, magnetism, and chemical agents), we can engineer these materials to undergo reversible changes in their bonding capabilities. The strategic design selection of stimuli is a pivotal factor in the design of switchable adhesive systems. This review outlines recent advancements in the field of smart switchable polymeric adhesives over the past decade with a focus on the selection of stimulus triggers. These systems are further categorized into one of four adhesion switching mechanisms upon initiation by a specific stimuli-trigger: (i) interfacial adhesion, (ii) stiffness, (iii) contact area, or (iv) suction-based switching. Evaluation of adhesion switching performance across systems is primarily made based on three key metrics: (i) maximum adhesion strength, (ii) switch ratio, and (iii) switch time. Different stimuli and mechanisms offer distinct advantages and limitations, influencing the performance characteristics and applicability of these materials across domains such as detachable biomedical devices, robotic grippers, and climbing robots. This review thus offers a perspective on the present advancements and challenges in this emerging field, along with insights into future directions.

Epoxy-based multifunctional re-bondable polymer with self-healing, shape memory and superb bonding properties

Thermoset epoxy resin-based materials are widely used, but their permanent cross-linked network limits their processability and reusability, which can lead to environmental burdens. In this work, by exploiting the weak reactivity of aniline to design appropriate reaction ratios, we achieved a linear link between the epoxy resin and the curing agent. This linear link, along with the crosslinking points provided by the flexibly branched polyurethanes, avoids the inherent brittleness associated with the highly crosslinked network of conventional epoxy resins. As a result, the adhesive exhibits extraordinary improvements in extensibility and toughness. The lap shear strength, tensile strength and elongation at break reach 11.9 MPa, 14.4 MPa and 607 %, respectively. The fracture toughness is as high as 109.6 kJ/m2, far beyond the existing epoxy adhesives. The synergistic effect of disulfide bonds and hydrogen bonds confers the adhesive with self-healing and repeatable bonding characteristics. The multi-level hydrogen bonding and appropriate phase separation structure are key to optimizing toughness, resulting in excellent comprehensive performance. The introduction of polyurethane not only improves toughness but also enhances the interfacial bonding force between the adhesive and the substrate, broadening the scope of applications. The prepared high-performance polymers provide new insights into reusable epoxy adhesives.

Fully Recycled Polyolefin Elastomer-Based Vitrimers with Ultra-High, Universal, Stable, and Switchable Adhesion

Achieving both robust adhesion to arbitrary surfaces and thermal-switchable/recyclable properties has proven challenging, particularly for commodity polyolefins. Herein, a simple and effective route is reported to transform polyolefins elastomer (POE) into a fully recycled epoxy-functionalized POE vitrimers (E-POE vit) with ultra-high, universal, stable, and switchable adhesion via facile free radical grafting and dynamic cross-linking. The resultant E-POE vit exhibits increase in adhesion strength on glass exceeding three to ten times compared to those commonly used polymers, due to the synergy of dense hydrogen (H)-bonds and strong interfacial affinity. In addition, E-POE vit also displays strong adhesion on diverse surfaces ranging from inorganic to organic while maintaining good stability in various harsh environments. More importantly, temperature-sensitive H-bonds allow E-POE vit to switch between attachment-detachment at alternating temperatures, resulting in reversible adhesion without adhesion loss, even after 10 cycles. Moreover, E-POE vit is able to be fully recycled and reused more than ten times via thermo-activated transesterification reactions with negligible change in structure and performance. This work may unlock strategies to fabricate high-performance commercial polymer-based adhesives with adhesion and recyclable features for intelligent and sustainable applications.

Self-healing and shape-memory polymers based on cellulose acetate matrix

The creation of self-healing polymers with superior strength and stretchability from biodegradable materials is attracting increasing attention. In this study, we synthesized new biomass-derived cellulose acetate (CA) derivatives by ring-opening graft polymerization of δ-valerolactone followed by the introduction of ureidopyrimidinone (Upy) groups in the polymer side chains. Due to the semicrystalline aliphatic characteristics of the side chain poly(δ-valerolactone) (PVL) and quadruple hydrogen bonds formed by the Upy groups, the stretchability of the resulting polymers was significantly enhanced. Moreover, the shape memory ability and self-healing property (58.3% of self-healing efficiency) were successfully imparted to the polymer. This study demonstrates the great significance of using biomass sources to create self-healing polymers.

Smart Manipulation of Complex Optical Elements via Contact-adaptive Dry Adhesives

The implementation of complex, high-precision optical devices or systems, which have vital applications in the aerospace, medical, and military fields, requires the ability to reliably manipulate and assemble optical elements. However, this is a challenging task as these optical elements require contamination-free and damage-free manipulation and come in a variety of sizes and shapes. Here, a smart, contact-adaptive adhesive based on magnetic actuation is developed to address this challenge. Specifically, the surface bio-inspired adhesives made of fluororubber facilitate contamination-free and damage-free adhesion. The stiffness modulation of packaged magnetorheological grease based on the magnetorheological effect endows the smart adhesive with a high conformability to the optical elements in the soft state, a high grip force in the stiff state, and the ability to quickly release the optical elements in the recovered soft state. The smart adhesive provides a versatile solution for reliably and quickly manipulating and assembling multiscale optical elements with planar or complex 3D shapes without causing surface contamination or damage. These extraordinary capabilities are demonstrated by the manipulation and assembly of various optical elements, such as convex/concave/ball lenses and extremely complex-shaped light guide plates. The proposed smart adhesive is a promising candidate for conventional optical element manipulation technologies.

Fused Filament Fabrication of a Dynamically Crosslinked Network Derived from Commodity Thermoplastics

A massive carbon footprint is associated with the ubiquitous use of plastics and their afterlife. Greenhouse gas (GHG) emissions from plastics are rising and increasingly consuming the global "carbon budget". It is, hence, paramount to implement an effective strategy to reclaim postconsumer plastic as feedstock for technologically innovative materials. Credible opportunity is offered by advances in materials chemistry and catalysis. Here, we demonstrate that by dynamically crosslinking thermoplastic polyolefins, commodity plastics can be upcycled into technically superior and economically competitive materials. A broadly applicable crosslinking strategy has been applied to polymers containing solely carbon-carbon and carbon-hydrogen bonds, initially by maleic anhydride functionalization, followed by epoxy-anhydride curing. These dynamic networks show a distinct rubber modulus above the melting transition. We demonstrate that sustainability and performance do not have to be mutually exclusive. The dynamic network can be extruded into a continuous filament to be in three-dimensional (3D) printing of complex objects, which retain the mechanical integrity of vitrimers. Being covalently crosslinked, these networks show a thermally triggered shape-memory response, with 90% recovery of a programmed shape. This study opens up the possibility of reclaiming recycled thermoplastics by imparting performance, sustainability, and technological advances to the reprocessed plastic.

Self-Healing Silsesquioxane-Based Materials

This review is devoted to self-healing materials (SHM) containing polyhedral oligomeric silsesquioxanes (POSS) as building blocks. The synthetic approach can vary depending on the role POSS are expected to play in a given system. POSS (especially double-decker silsesquioxanes) can be grafted in side chains of a polymer backbone or used as segments of the main chain. Appropriate functionalization allows the formation of dynamic bonds with POSS molecules and makes them an active component of SHM, both as crosslinking agents and as factors that enhance the dynamics of macromolecules in the polymer matrix. The latter effect can be achieved by reversible release of bulky POSS cages or by the formation of separated inclusions in the polymer matrix through hydrophobic interactions and POSS aggregation. The unique properties of POSS-based self-healing systems make them interesting and versatile materials for various applications (e.g., repairable coatings, sealants, sensors, soft materials for tissue engineering, drug delivery, and wound healing).

Strong Dynamic Interfacial Adhesion by Polymeric Ionic Liquids under Extreme Conditions

Interfacial adhesion under extreme conditions has attracted increasing attention owing to its potential application of stopping leakages of oil or natural gas. However, interfacial adhesion is rarely stable at ultralow temperatures and in organic solvents, necessitating the elucidation of the molecular-level processes. Herein, we used the intermolecular force-control strategy to prepare four linear polymers by tuning the proportion of hydrogen bonding and the number of electrostatic sites. The obtained polymeric ion liquids displayed strong dynamic adhesion at various interfaces. They also efficiently tolerated organic solvents and ultracold temperatures. Highly reversible rheological behaviors are observed within a thermal cycle between high and ultracold temperatures. Temperature-dependent infrared spectra and theoretical calculation reveal thermal reversibility and interfacial adhesion/debonding processes at the molecular level, respectively. This intermolecular force-control strategy may be applied to produce environmentally adaptive functional materials for real applications.

Cutting-Edge Progress in Stimuli-Responsive Bioadhesives: From Synthesis to Clinical Applications

With the advent of "intelligent" materials, the design of smart bioadhesives responding to chemical, physical, or biological stimuli has been widely developed in biomedical applications to minimize the risk of wounds reopening, chronic pain, and inflammation. Intelligent bioadhesives are free-flowing liquid solutions passing through a phase shift in the physiological environment due to stimuli such as light, temperature, pH, and electric field. They possess great merits, such as ease to access and the ability to sustained release as well as the spatial transfer of a biomolecule with reduced side effects. Tissue engineering, wound healing, drug delivery, regenerative biomedicine, cancer therapy, and other fields have benefited from smart bioadhesives. Recently, many disciplinary attempts have been performed to promote the functionality of smart bioadhesives and discover innovative compositions. However, according to our knowledge, the development of multifunctional bioadhesives for various biomedical applications has not been adequately explored. This review aims to summarize the most recent cutting-edge strategies (years 2015-2021) developed for stimuli-sensitive bioadhesives responding to external stimuli. We first focus on five primary categories of stimuli-responsive bioadhesive systems (pH, thermal, light, electric field, and biomolecules), their properties, and limitations. Following the introduction of principal criteria for smart bioadhesives, their performances are discussed, and certain smart polymeric materials employed in their creation in 2015 are studied. Finally, advantages, disadvantages, and future directions regarding smart bioadhesives for biomedical applications are surveyed.

Effect of pH on the Properties of Hydrogels Cross-Linked via Dynamic Thia-Michael Addition Bonds

Hydrogels cross-linked with dynamic covalent bonds exhibit time-dependent properties, making them an advantageous platform for applications ranging from biomaterials to self-healing networks. However, the relationship between the cross-link exchange kinetics, material properties, and stability of these platforms is not fully understood, especially upon addition of external stimuli. In this work, pH was used as a handle to manipulate cross-link exchange kinetics and control the resulting hydrogel mechanics and stability in a physiologically relevant window. Poly(ethylene glycol)-based hydrogels were cross-linked with a reversible thia-Michael addition reaction in aqueous buffer between pH 3 and pH 7. The rate constants of bond exchange and equilibrium constants were determined for each pH value, and these data were correlated with the resulting mechanical profiles of the bulk hydrogels. With increasing pH, both the forward and the reverse rate constants increased, while the equilibrium constant decreased. These changes led to faster stress relaxation and less stiff hydrogels at more basic pH values. The elevated pH values also led to an increased mass loss and a faster rate of release of an encapsulated model bovine serum albumin fluorescent protein. The connection between the kinetics, mechanics, and molecular release profiles provides important insight into the structure–property relationships of dynamic covalent hydrogels, and this system offers a promising platform for controlled release between physiologically relevant pH values.

Modulation of Interfacial Adhesion Using Semicrystalline Shape-Memory Polymers

Semicrystalline shape-memory elastomers are molded into deformable geometrical features to control adhesive interactions between elastomers and a glass substrate. By mechanically and thermally controlling the deformation and phase-behavior of molded features, we can control the interfacial contact area and the interfacial adhesive force. Results indicate that elastic energy is stored in the semicrystalline state of deformed features and can be released to break attractive interfacial forces, automatically separating the glass substrate from the elastomer. Our findings suggest that the shape-memory elastomers can be applied in various contact printing applications to control adhesive forces and delamination mechanics during ink pickup and transfer.

Surface Adaptable and Adhesion Controllable Dry Adhesive with Shape Memory Polymer

Gecko foot consist of numerous micro/nano hierarchical hairs and exhibit a high adhesion onto various surfaces by the "van der Waals force". The gecko, despite its mighty adhesion, can travel efficiently with a rapid adhesion switching given that the end of hair in the gecko foot is slanted in one direction. Herein, we report a shape memory polymer (SMP)-based switchable dry adhesive (SSA), inspired by gecko foot, having tremendous surface adaptability and adhesion switching capability. The SSA shows not only high adhesion to the various surfaces (approximately 332.8 kPa) but also easy detachment (nearly 3.73 kPa) due to the characteristic of SMP, which can reversibly recover from a deformed shape to its initial shape. On the basis of the novel adhesion switching property, we suggest the SSA-applied advanced glass transfer system as a feasible application. This experiment confirms that an ultra-thin and light glass film is transferred easily and sustainably, and we believe that the SSA might be a breakthrough and a powerful alternative for not only conventional dry adhesive but also the next-level transfer systems. This article is protected by copyright. All rights reserved.

Stimuli-responsive temporary adhesives: enabling debonding on demand through strategic molecular design

Stimuli-responsive temporary adhesives constitute a rapidly developing class of materials defined by the modulation of adhesion upon exposure to an external stimulus or stimuli. Engineering these materials to shift between two characteristic properties, strong adhesion and facile debonding, can be achieved through design strategies that target molecular functionalities. This perspective reviews the recent design and development of these materials, with a focus on the different stimuli that may initiate debonding. These stimuli include UV light, thermal energy, chemical triggers, and other potential triggers, such as mechanical force, sublimation, electromagnetism. The conclusion discusses the fundamental value of systematic investigations of the structure-property relationships within these materials and opportunities for unlocking novel functionalities in future versions of adhesives.

Construction of Self-Healing Disulfide-Linked Silicone Elastomers by Thiol Oxidation Coupling Reaction

Developing self-healing silicone elastomers are highly significant because of their promising applications. Herein, we present novel self-healing disulfide-linked silicone elastomers (SEs) based on thiol-terminated sulfur-containing heterochain polysiloxanes (P-SHs) and three thiol-containing crosslinkers, including pentaerythritol tetrakis(β-mercaptopropionate) (PETMP), octa(3-mercaptopropyl)silsesquioxane (POSS-SH), and poly[(mercaptopropyl)methylsiloxane] (PMMS), via the thiol oxidation coupling reactions. The construction of these SEs can rapidly proceed at room temperature. The effects of crosslinker species and amounts on the formability and mechanical properties were investigated. The silicone elastomers can be self-healed by heating at 150 °C for 2 h or under UV radiation for 30 min after cutting them into pieces and the self-healing efficiency is >70%. Moreover, they can be utilized as adhesives for bonding glass sheets, which can hold a 200 g weight. The bonding is reversible and can repeatedly proceed many times, indicating that these materials can promisingly be applied as reversible adhesives. These results indicate that a thiol oxidation coupling reaction is a simple and effective strategy for the construction of self-healing disulfide-linked elastomers. Under this strategy, more disulfide-linked organic elastomers with self-healing properties can be designed and constructed and their applications can be further explored.

Design of tough adhesive from commodity thermoplastics through dynamic crosslinking

Tough adhesives provide resistance against high debonding forces, and these adhesives are difficult to design because of the simultaneous requirement of strength and ductility. Here, we report a design of tough reversible/recyclable adhesive materials enabled by incorporating dynamic covalent bonds of boronic ester into commodity triblock thermoplastic elastomers that reversibly bind with various fillers and substrates. The spectroscopic measurements and density functional theory calculations unveil versatile dynamic covalent binding of boronic ester with various hydroxy-terminated surfaces such as silica nanoparticles, aluminum, steel, and glass. The designed multiphase material exhibits exceptionally high adhesion strength and work of debonding with a rebonding capability, as well as outstanding mechanical, thermal, and chemical resistance properties. Bonding and debonding at the interfaces dictate hybrid material properties, and this revelation of tailored dynamic interactions with multiple interfaces will open up a new design of adhesives and hybrid materials.

A review of shape memory polymers based on the intrinsic structures of their responsive switches

Shape memory polymers (SMPs), as stimuli-responsive materials, have attracted worldwide attention. Based on the history and development of SMPs, a variety of reports about SMPs in recent years are summarized in this paper. The responsive switches are analyzed and divided into two kinds according to their intrinsic structures: physical switch and chemical one. Then, detailed classification and comprehensive discussion of SMPs are further elaborated, based on the intrinsic structures of responsive switches and stimulation types. Finally, the development and prospect of SMPs are objectively predicted and forecasted.

Light-Mediated Synthesis and Reprocessing of Dynamic Bottlebrush Elastomers under Ambient Conditions

We introduce a novel grafting-through polymerization strategy to synthesize dynamic bottlebrush polymers and elastomers in one step using light to construct a disulfide-containing backbone. The key starting material-α-lipoic acid (LA)-is commercially available, inexpensive, and biocompatible. When installed on the chain end(s) of poly(dimethylsiloxane) (PDMS), the cyclic disulfide unit derived from LA polymerizes under ultraviolet (UV) light in ambient conditions. Significantly, no additives such as initiator, solvent, or catalyst are required for efficient gelation. Formulations that include bis-LA-functionalized cross-linker yield bottlebrush elastomers with high gel fractions (83-98%) and tunable, supersoft shear moduli in the ∼20-200 kPa range. An added advantage of these materials is the dynamic disulfide bonds along each bottlebrush backbone, which allow for light-mediated self-healing and on-demand chemical degradation. These results highlight the potential of simple and scalable synthetic routes to generate unique bottlebrush polymers and elastomers based on PDMS.

Controlling the Morphology of Dynamic Thia-Michael Networks to Target Pressure-Sensitive and Hot Melt Adhesives

A series of multistage (pressure-sensitive/hot melt) adhesives utilizing dynamic thia-Michael bonding motifs are reported. The benzalcyanoacetate Michael acceptors used in this work undergo bond exchange under ambient conditions without external catalysis, facilitating pressure-sensitive adhesion. A key feature of this system is the dynamic reaction-induced phase separation that lends reinforcement to the otherwise weakly bonded materials, enabling weak, repeatable pressure-sensitive adhesion under ambient conditions and strong adhesion when processed as a hot melt adhesive. By using different pairs of benzalcyanoacetate cross-linking units, the phase separation characteristics of the adhesives can be directly manipulated, allowing for a tailored adhesive response.

Harnessing reversible dry adhesion using shape memory polymer microparticles

Reversible adhesion switching on the micron scale greatly extends the functionality of shape memory polymers. Herein, we report the first usage of polystyrene microparticles for the reversible dry adhesive of the on/off switch between bonding and debonding. The reversible dry adhesive property is attributed to the stiffness change under the varying temperature of the polystyrene microparticle, as well as its ability to lock a temporary shape and recover to its original shape. The decrease in the modulus/viscosity of polystyrene microparticles at high temperature improves the surface wetting/contact and enhances the adhesive bond by contact pressure. Then, when heating above its glass transition temperature after bonding, the adhesive recovers to its initial shape, resulting in almost a zero adhesion strength. Besides, adhesion tests reveal that the magnitude of adhesion variations depends on substrates, contact pressures, and particle sizes. Therefore, as a thermotropic-induced shape memory material, the adhesive (polystyrene microparticles) can be used to create joints and can be heated to achieve its own restoration.

Shape memory polymers can provide excellent bonding property because of their shape memory effects. This paper proposes an adhesive unit that is capable of repeatable smart adhesion and exhibits reversible adhesion under heating.

Deterministic control of adhesive crack propagation through jamming based switchable adhesives

Controlling delamination across a material interface is a foundation of adhesive science and technology. This ranges from creating permanent, strong adhesives which limit crack propagation to reversible adhesives which initiate cracks for release. Methods which dynamically control cracks can lead to more robust adhesion, however specific control of crack initiation, propagation, and arresting is challenging because time scales of crack propagation are much faster than times scales of mechanisms to arrest cracks. Here we show the deterministic control of crack initiation, propagation, and arresting by integrating a granular jamming layer into adhesive films. This allows for controlled initiation of a propagating crack by reducing rigidity and then rapidly arresting the crack through jamming, with a rise in stiffness and an 11× enhancement in adhesion. This process is highly reversible and programmable, allowing for numerous crack initiation, propagation, and arresting cycles at arbitrary selectable locations in a peeling adhesive. We demonstrate this crack-control approach in single and multiple peel directions under fixed load conditions in response to diverse pressurization input signal profiles (i.e. time varying propagation and arresting scenarios).

Switchable Adhesion for Nonflat Surfaces Mimicking Geckos' Adhesive Structures and Toe Muscles

Gecko-inspired dry adhesion has attracted much attention for many applications such as soft grippers and wall-climbing robots, which, however, demonstrate stable adhesion on flat surfaces and small adhesion on nonflat surfaces. In practice, geckos' capability of walking upside down on both flat and nonflat surfaces comes from the combined action of adhesive structures for passive adhesion and toe muscles for stiffness modulation. Inspired by this behavior, this study proposes a hierarchal adhesive structure for high and switchable adhesion on nonflat surfaces. The three-layer adhesive consists of a mushroom-shaped structure top layer, stiffness modulation thermoplastic polyurethane (middle layer), and an electrothermal film (bottom layer) that mimics the epidermal adhesive structures, toe muscles, and electromyographic signals, respectively. Through the tunable structural stiffness controlled by adjusting the voltage, the adhesive force can be increased by 1 or 2 orders of magnitude compared to the conventional adhesive structures and further used for attachment and detachment functions. The gecko-inspired soft gripper is successfully tested as a pick-up and drop-down system for transporting a surface with different features, which has great application potential in industrial lines and daily life.

Assembling of Reprocessable Polybutadiene-Based Vitrimers with High Strength and Shape Memory via Catalyst-Free Imine-Coordinated Boroxine

Vitrimers endow cross-linked polymers with malleability and reprocessability via exchange reactions. However, designing of reprocessable, shape-memory polymer materials with high strength via a catalyst-free method remains a challenge under mild conditions. Here, we propose a facile strategy to address this dilemma by introducing the exchangeable imine bond and N-coordinated boroxine into a polybutadiene (PB)-based network. Specifically, PB grafted with 2-aminoethanethiol is reacted with the formyl group of phenylboronic acid and dehydrated to form a dual-dynamic covalently cross-linked network at room temperature. The dynamic network draws on the advantage of imine (toughness) and N-coordinated boroxine (strength), making the PB-based materials exhibit favorable malleability, mechanical property, reprocessability, and thermal-induced shape-memory behavior. We can obtain customized high mechanical properties by tuning the cross-linking density, and the tensile strength reaches a high value (12.35 MPa) without fillers or any other additives. Meanwhile, the unique network framework makes the material recycle over several times without sacrificing its property. This work presents a facile and effective approach to achieve a multifunctional polymer with customized attributes. Besides, this strategy can recycle end-of-life rubber to alleviate environmental pollution and provide inspiration for fabricating targeted materials by uniting the dynamic covalent or noncovalent bonds.

Preparation, characterization and properties of intrinsic self-healing elastomers

Significant advances have been made in the development of self-healing synthetic polymer materials in recent years. This review article discusses the recent progress in preparation, characterization and properties of different kinds of intrinsic self-healing elastomers based on reversible covalent bonds and dynamic supramolecular chemistry. Healing conditions, mechanical property recovery and healing efficiency are the main discussion topics. Potential applications, challenges and future prospects in self-healing elastomer fields are also discussed in the last part of this review.

Substrate-Independent, Reversible, and Easy-Release Ionogel Adhesives with High Bonding Strength

It is highly desirable to develop reversible and easy-release adhesives with high bonding strength for a broad range of substrates, while the adhesion of low-surface-energy materials (e.g., polytetrafluoretyhylene, PTFE) is challenging. Herein, a substrate-independent ionogel adhesive is developed by blending an ionic liquid with the copolymer bearing charged segments. By regulating the viscoelastic properties of the ionogel, the adhesive and cohesive strength of the ionogel can be well balanced to maximize the bonding strength for different substrates. The as-developed ionogel exhibits high bonding strength (>0.3 MPa) for PTFE, plastics, metal, wood, and glass, because the variety of functional groups in the ionogel can form various supramolecular interactions with different substrates. The ionogel also exhibits reversible, easy-release, and reusable properties for multiple times of bonding and on-demand debonding without leaving obvious residues on the substrates. The ionogel has high potential for practical applications as temporal adhesives with high bonding strength.

Dynamic reaction-induced phase separation in tunable, adaptive covalent networks

A series of catalyst-free, room temperature dynamic bonds derived from a reversible thia-Michael reaction are utilized to access mechanically robust dynamic covalent network films. The equilibrium of the thiol addition to benzalcyanoacetate-based Michael-acceptors can be directly tuned by controlling the electron-donating/withdrawing nature of the Michael-acceptor. By modulating the composition of different Michael-acceptors in a dynamic covalent network, a wide range of mechanical properties and thermal responses can be realized. Additionally, the reported systems phase-separate in a process, coined dynamic reaction-induced phase separation (DRIPS), that yields reconfigurable phase morphologies and reprogrammable shape-memory behaviour as highlighted by the heat-induced folding of a predetermined structure.

Ion-Conducting Dynamic Solid Polymer Electrolyte Adhesives

Cross-linked polymer electrolytes containing structurally dynamic disulfide bonds have been synthesized to investigate their combined ion transport and adhesive properties. Dynamic network polymers of varying cross-link densities are synthesized via thiol oxidation of a bisthiol monomer, 2,2'-(ethylenedioxy)diethanethiol, and tetrathiol cross-linker, pentaerythritol tetrakis(3-mercaptopropionate). At optimal loading of lithium bis(trifluoromethane-sulfonyl-imide) (LiTFSI) salt, the ionic conductivities (σ) at 90 °C are about 1 × 10^-4 and 1 × 10^-5 S/cm at the lowest and highest cross-linking, respectively. Notably, in comparison to the equivalent nondynamic network, the dynamic network shows a positive deviation in σ above 90 °C, which suggests the enhancement of ion transport occurs from the difference in structural relaxation on account of the dissociation of disulfide bonds. Lap shear adhesion and conductivity tests on ITO-coated glass substrates reveal the dynamic network exhibits a higher adhesive shear strength of 0.2 MPa (vs 0.03 MPa for the nondynamic network) and higher σ after the application of external stimulus (UV light or heat). The adhesive strength and σ are stable over multiple debonding/rebonding cycles and, thus, demonstrating the utility of these structurally dynamic networks as solid polymer electrolyte adhesives.

Combined Dynamic Network and Filler Interface Approach for Improved Adhesion and Toughness in Pressure-Sensitive Adhesives

Of importance for adhesive materials, particularly pressure-sensitive adhesive (PSA) systems, is the ability to increase bulk toughness without reduction of adhesion. Previous approaches for increasing PSA durability sacrifice permanent cross-linking or adhesive potential, limiting performance. In this work, covalent adaptable networks (CANs) derived from thiol-thioester exchange (TTE) are utilized as a basis for adhesive films. Tensile and single-lap shear tests were conducted for adhesive materials containing no filler, 15 wt % nanoparticles functionalized with thioester-containing acrylate, or 15 wt % nanoparticles functionalized with nonthioester-containing acrylate. Additionally, fatigue experiments were conducted on unfilled adhesives. Results indicate that TTE improves toughness, adhesion, and fatigue in unfilled materials. Filled adhesives with activated TTE showed a nearly fourfold increase in adhesion with slightly reduced toughness compared to uncatalyzed filled specimens. This work has implications in many industries, from biomedical to automotive, as toughness and fatigue resistance are important considerations for adhesive applications.

Tunable Adhesion from Stoichiometry-Controlled and Sequence-Defined Supramolecular Polymers Emerges Hierarchically from Cyanostar-Stabilized Anion-Anion Linkages

Sequence-controlled supramolecular polymers offer new design paradigms for generating stimuli-responsive macromolecules with enhanced functionalities. The dynamic character of supramolecular links present challenges to sequence definition in extended supramolecular macromolecules, and design principles remain nascent. Here, we demonstrate the first example of using stoichiometry-control to specify the monomer sequence in a linear supramolecular polymer by synthesizing both a homopolymer and an alternating copolymer from the same glycol-substituted cyanostar macrocycle and phenylene-linked diphosphate monomers. A 2:1 stoichiometry between macrocycle and diphosphate produces a supramolecular homopolymer of general formula (A)_n comprised of repeating units of cyanostar-stabilized phosphate-phosphate dimers. Using a 1:1 stoichiometry, an alternating (AB)_n structure is produced with half the phosphate dimers now stabilized by the additional counter cations that emerge hierarchically after forming the stronger cyanostar-stabilized phosphate dimers. These new polymer materials and binding motifs are sufficient to bear normal and shear stress to promote significant and tunable adhesive properties. The homopolymer (A)_n, consisting of cyanostar-stabilized anti-electrostatic linkages, shows adhesion strength comparable to commercial superglue formulations based on polycyanoacrylate but is thermally reversible. Unexpectedly, and despite including traditional ionic linkages, the alternating copolymer (AB)_n shows weaker adhesion strength more similar to commercial white glue based on poly(vinyl acetate). Thus, the adhesion properties can be tuned over a wide range by simply controlling the stoichiometric ratio of monomers. This study offers new insight into supramolecular polymers composed of custom-designed anion and receptor monomers and demonstrates the utility of emerging functional materials based on anion-anion linkages.

Self-healing behaviour of furan–maleimide poly(ionic liquid) covalent adaptable networks

Recovery of mechanical (tensile testing) and conductive (chronoamperometric cycling) properties was observed for PIL networks containing thermoreversible furan–maleimide crosslinks.

Enabling Applications of Covalent Adaptable Networks

The ability to behave in a fluidlike manner fundamentally separates thermoset and thermoplastic polymers. Bridging this divide, covalent adaptable networks (CANs) structurally resemble thermosets with permanent covalent crosslinks but are able to flow in a manner that resembles thermoplastic behavior only when a dynamic chemical reaction is active. As a consequence, the rheological behavior of CANs becomes intrinsically tied to the dynamic reaction kinetics and the stimuli that are used to trigger those, including temperature, light, and chemical stimuli, providing unprecedented control over viscoelastic properties. CANs represent a highly capable material that serves as a powerful tool to improve mechanical properties and processing in a wide variety of polymer applications, including composites, hydrogels, and shape-memory polymers. This review aims to highlight the enabling material properties of CANs and the applied fields where the CAN concept has been embraced.

Tunable and Processable Shape-Memory Materials Based on Solvent-Free, Catalyst-Free Polycondensation between Formaldehyde and Diamine at Room Temperature

Compared with traditional thermosets, malleable thermosets have more applications in aerospace, biotechnology, and construction. Here we report a one-step, solvent-free, catalyst-free polycondensation method between diamine and formaldehyde to prepare a series of malleable hemiaminal dynamic covalent networks (HDCNs). The materials have excellent malleability and reprocessability by hot pressing. The Young's modulus and breaking strength of HDCNs obtained by the polycondensation of formaldehyde and 4,4-diaminodiphenylmethane (MDA) are as high as 1.6 GPa and 60 MPa, respectively, which can be facilely adjusted through the introduction of polyetheramine-400 (PEDA). Moreover, the HDCNs feature the shape memory ability with a recovery ratio above 93.5% and can be recycled by the addition of different monomers. This promising HDCN, prepared from economical raw materials, may have vast applications in industries.

Adhesion Control of Branched Catecholic Polymers by Acid Stimulation

Biomimetic material design is a useful method for producing new functional materials. In recent years, catecholic polymers inspired from the adhesion mechanism of marine organisms have attracted attention. Here, we demonstrated the preparation of catecholic polymers by reversible addition-fragmentation chain transfer (RAFT) polymerization of an acetonide-protected catecholic monomer, that is, N-(2-(2,2-dimethylbenzo-1,3-dioxol-5-yl)ethyl)-acrylamide (DDEA). By selecting the specific RAFT reagents, well-defined branched PDDEA and linear PDDEA were obtained. These PDDEA samples showed stronger adhesion strength after deprotection by acid stimulation compared with that before deprotection. In addition, we demonstrated the adhesion control of synthetic polymers by photoirradiation in the presence of photoacid generators, which decompose under light and release an acid.

Effect of the Strength of Stickers on Rheology and Adhesion of Supramolecular Center-Functionalized Polyisobutenes

In order to systematically investigate the effect of the strength of the supramolecular interactions on the debonding properties of associative polymers, a series of model systems have been characterized by probe-tack tests. These model materials, composed of linear and low dispersity poly(isobutylene) chains ( M_n ≈ 3 kg/mol) center-functionalized by a single bis-urea sticker, are able to self-assemble by four hydrogen bonds. Three types of stickers are used in the present study: a bis-urea with a methylene diphenyl (MDI) spacer, a bis-urea with a tolyl (TOL) spacer, and a bis-urea with a xylyl (XYL) spacer. In order to investigate the influence of stickers in depth, both the nanostructure of the materials and the linear rheology were investigated by small-angle X-ray scattering (SAXS) and oscillatory shear, respectively. For two types of stickers (TOL and XYL), the association of polymers via hydrogen bonds induces the formation of bundles of rodlike aggregates at room temperature and the behavior of a soft elastic material was observed. For bis-urea MDI, no structure is detected by SAXS and a Newtonian behavior is observed at room temperature. In probe-tack experiments, all these materials show a cohesive mode of failure, a signature of flowing materials as previously observed for tri-urea center-functionalized poly(butylacrylate) (PnBA3U). However, XYL center-functionalized polyisobutene shows much higher debonding energies than PnBA3U, revealing the importance of the strength of noncovalent bonds in the scission/recombination dynamics. On the basis of the analysis of the debonding images, this effect is discussed via the mechanical behavior at large deformation.

Light-Induced Reworkable Adhesives Based on ABA-type Triblock Copolymers with Azopolymer Termini

Photocurable adhesives based on polymers and resins are an integral part of different production processes because of their fast curing and local area bonding ability. Recently, dismantlable adhesives have attracted a lot of attention for recycling adherends or replacement of adhesion defects. However, adhesives that allow repeatable bonding and debonding solely by light irradiation, i.e., without heat activation, are lacking. Here, ABA-type triblock copolymers consisting of poly(meth)acrylates bearing an azobenzene moiety (A block) and 2-ethylhexyl (B block) side chains were synthesized and utilized as photocurable adhesives. In contrast to the azo homopolymers, the block copolymer structure and incorporation of the soft middle block actualized a low concentration of the azobenzene moiety and consequently, higher flexibility of the resultant copolymers. This enabled film formation of the azobenzene-based adhesives and light-induced bonding for the first time. On the basis of the photoisomerization of the azobenzene moiety, changes in their viscoelastic property, i.e., softening and hardening, were induced by UV irradiation at 365 nm (50-100 mW cm^-2) and green light irradiation at 520 nm (40 mW cm^-2), respectively. In fact, two glass substrates were bonded with the self-standing polymer film, which was sequentially softened and hardened upon UV and green light irradiations. They exhibited shear strengths of 1.5-2.0 MPa, and UV irradiation lowered the adhesion strength to 0.5-0.1 MPa. Interestingly, the repeatable bonding and debonding abilities of the polymers were accomplished without loss of the adhesion strength.