Nitrogen- and Sulfur-Codoped Hierarchically Porous Carbon for Adsorptive and Oxidative Removal of Pharmaceutical Contaminants

Carbonaceous materials in structural dimensions for advanced oxidation processes

Carbonaceous materials have attracted extensive research and application interests in water treatment owing to their advantageous structural and physicochemical properties. Despite the significant interest and ongoing debates on the mechanisms through which carbonaceous materials facilitate advanced oxidation processes (AOPs), a systematic summary of carbon materials across all dimensions (0D-3D nanocarbon to bulk carbon) in various AOP systems remains absent. Addressing this gap, the current review presents a comprehensive analysis of various carbon/oxidant systems, exploring carbon quantum dots (0D), nanodiamonds (0D), carbon nanotubes (1D), graphene derivatives (2D), nanoporous carbon (3D), and biochar (bulk 3D), across different oxidant systems: persulfates (peroxymonosulfate/peroxydisulfate), ozone, hydrogen peroxide, and high-valent metals (Mn(VII)/Fe(VI)). Our discussion is anchored on the identification of active sites and elucidation of catalytic mechanisms, spanning both radical and nonradical pathways. By dissecting catalysis-related factors such as sp2/sp3 C, defects, and surface functional groups that include heteroatoms and oxygen groups in different carbon configurations, this review aims to provide a holistic understanding of the catalytic nature of different dimensional carbonaceous materials in AOPs. Furthermore, we address current challenges and underscore the potential for optimizing and innovating water treatment methodologies through the strategic application of carbon-based catalysts. Finally, prospects for future investigations and the associated bottlenecks are proposed.

Advanced carbo-catalytic degradation of antibiotics using conductive polymer-seaweed biochar composite: Exploring N/S functionalization and non-radical dynamics

Polyaniline (PANI) and Saccharina Japanica seaweed (kelp) biochar (KBC) composites were synthesized in-situ through polymerization. This study presents a novel approach to the degradation of sulfamethoxazole (SMX), a prevalent antibiotic, using a PANI-KBC composite to activate peroxymonosulfate (PMS). Extensive characterizations of the PANI-KBC composite were conducted, resulting in successful synthesis, uniform distribution of PANI on the biochar surface, and the multifunctional role of PANI-KBC in SMX degradation. A removal efficiency of 97.24% for SMX (10 mg L-1) was attained in 60 min with PANI-KBC (0.1 g L-1) and PMS (1.0 mM) at pH 5.2, with PANI-KBC showing effectiveness (>92%) across a pH range of 3.0-9.0. In the degradation of SMX, both radical (SO4•- and •OH) and non-radical (1O2 and electron transfer) pathways are involved. The reaction processes are critically influenced by the roles of SO4•-, 1O2 and electron transfer mechanisms. It was suggested that pyrrolic N, oxidized sulfur (-C-SO2-C-), structural defects, and O-CO were implicated in the production of 1O2 and electron transfer processes, respectively, and a portion of 1O2 originated from the conversion of O2•-. The study evaluated by-product toxicity, composite reusability, and stability, confirming its practical potential for sustainable groundwater remediation.

Chemical methods to remove microplastics from wastewater: A review

Microplastics (Mps) have emerged as a pervasive environmental concern, with their presence detected not only in freshwater ecosystems but also in drinking and bottled water sources. While extensive research has centered on understanding the origins, migration patterns, detection techniques, and ecotoxicological impacts of these contaminants, there remains a notable research gap about the strategies for Mps removal. This study reviews existing literature on chemical approaches for mitigating microplastic contamination within wastewater systems, focusing on coagulation precipitation, electrocoagulation, and advanced oxidation methods. Each approach is systematically explored, encompassing their respective mechanisms and operational dynamics. Furthermore, the comparative analysis of these three techniques elucidates their strengths and limitations in the context of MPs removal. By shedding light on the intricate mechanisms underlying these removal methods, this review contributes to the theoretical foundation of microplastic elimination from wastewater and identifies future research trajectories and potential challenges.

Catalytic activation of persulfate by nanoscale zero-valent iron-derived supported boron-doped porous carbon for bisphenol A degradation

In this study, boron-doped porous carbon materials (BCs) with high surface areas were synthesized employing coffee grounds as carbon source and sodium bicarbonate and boric acid as precursors; afterward, nanoscale zero-valent iron (nZVI) and BCs composites (denoted as nZVI@BCs) were further prepared through reduction of FeSO4 by NaBH4 along with stirring. The performance of the nZVI@BCs for activating persulfate (PS) was evaluated for the degradation of bisphenol A (BPA). In comparison with nZVI@Cs/PS, nZVI@BCs/PS could greatly promote the degradation and mineralization of BPA via both radical and non-radical pathways. On the one hand, electron spin resonance and radical quenching studies represented that •OH, SO4•-, and O2•- were mainly produced in the nZVI@BCs/PS system for BPA degradation. On the other hand, the open circuit voltages of nZVI@BCs and nZVI@Cs in different systems indicated that non-radical pathway still existed in our system. PS could grab the unstable unpaired electron on nZVI@BCs to form a carbon material surface-confined complex ([nZVI@BCs]*) with a high redox potential, then accelerate BPA removal efficiency via direct electron transfer. Furthermore, the performances and mechanisms for BPA degradation were examined by PS activation with nZVI@BC composites at various conditions including dosages of nZVI@BCs, BPA and PS, initially pH value, temperature, common anions, and humid acid. Therefore, this study provides a novel insight for development of high-performance carbon catalysts toward environmental remediation.

Preparation of Cobalt-Nitrogen Co-Doped Carbon Nanotubes for Activated Peroxymonosulfate Degradation of Carbamazepine

Cobalt-nitrogen co-doped carbon nanotubes (Co3@NCNT-800) were synthesized via a facile and economical approach to investigate the efficient degradation of organic pollutants in aqueous environments. This material demonstrated high catalytic efficiency in the degradation of carbamazepine (CBZ) in the presence of peroxymonosulfate (PMS). The experimental data revealed that at a neutral pH of 7 and an initial CBZ concentration of 20 mg/L, the application of Co3@NCNT-800 at 0.2 g/L facilitated a degradation rate of 64.7% within 60 min. Mechanistic investigations indicated that the presence of pyridinic nitrogen and cobalt species enhanced the generation of reactive oxygen species. Radical scavenging assays and electron spin resonance spectroscopy confirmed that radical and nonradical pathways contributed to CBZ degradation, with the nonradical mechanism being predominant. This research presents the development of a novel PMS catalyst, synthesized through an efficient and stable method, which provides a cost-effective solution for the remediation of organic contaminants in water.

Zinc and sulfur functionalized biochar as a peroxydisulfate activator via deferred ultraviolet irradiation for tetracycline removal

To enhance the degradation of tetracycline class (TC) residuals of high-concentration from pharmaceutical wastewater, a novel zinc (Zn) and sulfur (S) functionalized biochar (SC-Zn), as a peroxydisulfate (PDS) activator, was prepared by two-step pyrolysis using ZnSO4 accumulated water-hyacinth. Results showed that the removal rate of 50, 150, and 250 mg per L TC reached 100%, 99.22% and 94.83% respectively, by the SC-Zn/PDS system at a dosage of 0.3 g per L SC-Zn and 1.2 mM PDS, via the deferred ultraviolet (UV) irradiation design. Such excellent performance for TC removal was due to the synergetic activation of PDS by the biochar activator and UV-irradiation with biochar as a responsive photocatalyst. The functionalization of the co-doped Zn and S endowed the biochar SC-Zn with a significantly enhanced catalytic performance, since Zn was inferred to be the dominant catalytic site for SO4˙- generation, while S played a key role in the synergism with Zn by acting as the primary adsorption site for the reaction substrates. The employed SC-Zn/PDS/UV system had excellent anti-interference under different environmental backgrounds, and compared with the removal rate of TC by adsorption of SC-Zn, the increasing rate in the SC-Zn/PDS/UV system (18.75%) was higher than the sum of the increases in the SC-Zn/PDS (9.87%) and SC-Zn/UV systems (3.34%), furtherly verifying the systematic superiority of this synergy effect. This study aimed to prepare a high-performance functionalized biochar activator and elucidate the rational design of deferred UV-irradiation of PDS activation to efficiently remove high-concentration antibiotic pollutants.

Enhanced conversion of superoxide radical to singlet oxygen in peroxymonosulfate activation by metal-organic frameworks derived heteroatoms dual-doped porous carbon catalyst

The activation of persulfate technology using carbon-based materials doped with heteroatoms has been extensively researched for the elimination of refractory pollutants in wastewater. In this study, metal-organic frameworks were utilized as precursors to synthesize P, N dual-doped carbon material (PNC), which was employed to activate peroxymonosulfate (PMS) for the degradation of tetracycline hydrochloride (TCH). The results demonstrated a 90.2% removal efficiency of total organic carbon within 60 min. The significant increase of surface defects on the nitrogen self-doped porous carbon materials anchored with phosphorus promoted the conversion of superoxide radical to singlet oxygen during PMS activation, which was identified as the key active species of PNC/PMS system. Additionally, the enhanced direct electron transfer also facilitated the degradation of TCH. Consequently, TCH was successfully degraded into nontoxic and harmless inorganic small molecules. The findings of this research provide valuable insights into improving the performance of heteroatom-doped carbon materials for pollutant degradation by activating PMS and transforming the non-radical pathway. The results highlight the potential of metal-organic frameworks derived heteroatoms dual-doped porous carbon catalysts for the development of advanced treatment technologies in wastewater treatment.

Peroxymonosulfate activation by Fe-N-S co-doped tremella-like carbocatalyst for degradation of bisphenol A: Synergistic effect of pyridine N, Fe-Nx, thiophene S

Bisphenol A (BPA) has received increasing attention due to its long-term industrial application and persistence in environmental pollution. Iron-based carbon catalyst activation of peroxymonosulfate (PMS) shows a good prospect for effective elimination of recalcitrant contaminants in water. Herein, considering the problem about the leaching of iron ions and the optimization of heteroatoms doping, the iron, nitrogen and sulfur co-doped tremella-like carbon catalyst (Fe-NS@C) was rationally designed using very little iron, S-C₃N₄ and low-cost chitosan (CS) via the impregnation-calcination method. The as-prepared Fe-NS@C exhibited excellent performance for complete removal of BPA (20 mg/L) by activating PMS with the high kinetic constant (1.492 min^-1) in 15 min. Besides, the Fe-NS@C/PMS system not only possessed wide pH adaptation and high resistance to environmental interference, but also maintained an excellent degradation efficiency on different pollutants. Impressively, increased S-C₃N₄ doping amount modulated the contents of different N species in Fe-NS@C, and the catalytic activity of Fe-NS@C-1-x was visibly enhanced with increasing S-C₃N₄ contents, verifying pyridine N and Fe-N_x as main active sites in the system. Meanwhile, thiophene sulfur (C-S-C) as active sites played an auxiliary role. Furthermore, quenching experiment, EPR analysis and electrochemical test proved that surface-bound radicals (^·OH and SO₄^⋅-) and non-radical pathways worked in the BPA degradation (the former played a dominant role). Finally, possible BPA degradation route were proposed. This work provided a promising way to synthesize the novel Fe, N and S co-doping carbon catalyst for degrading organic pollutants with low metal leaching and high catalytic ability.

Catalytic degradation of dimethomorph by nitrogen-doped rice husk biochar

N-doped biochar is widely used for activating persulfate to degrade organic pollutants. Which type of N atom is the key factor for activation is still unclear and needs to be further explored and analyzed. In this study, four kinds of biochar were prepared using urea and rice husk as precursors, and tested for the catalytic degradation of dimethomorph. Increasing the nitrogen doping level caused the catalytic removal efficiency of dimethomorph in the presence of peroxymonosulfate increased from 16.6% to 86.8%. A correlation analysis showed that the ability of N-doped biochar to activate PMS is mainly related to the content of pyrrole N, graphite N and carbonyl and the degree of defects. In experiments on electron paramagnetic resonance and free radical suppression, the reactive species of SO₄^•-, ¹O₂,·OH and O₂^.- were detected, among which ¹O₂ was found to be the main agent in the nonradical pathway. The degradation pathways for dimethomorph were analyzed based on a total of 8 degradation products identified by high-performance liquid chromatography-time of flight mass spectrometry (HPLC-Q-TOFMS). The results of this study provide a fundamental basis for using agricultural waste to produce inexpensive and efficient nonmetal catalysts that are highly effective in reducing dimethomorph levels in agricultural lands.

Facilely achieved enhancement of Fenton-like reactions by constructing electric microfields

In this work, we found that the presence of non-active ZnO crystals greatly accelerated the degradation of Bisphenol A (BPA) by 3.7 folds in the peroxymonosulfate (PMS, HSO₅^-)/Co₃O₄ system. Our mechanistic study revealed that the ZnO particles would create negative electric microfields around them, which are closely related with the zeta potentials (ζ) of ZnO and affected by solution pH. According to COMSOL simulation, the electrostatic repulsion between ZnO and PMS would drive HSO₅^- toward active Co₃O₄ surface, leading to the concentration increasing of HSO₅^- around active Co₃O₄ particles, which will then improve the degradation performance. The particle size of ZnO will also affect the promoting effect greatly by COMSOL simulation. Therefore, this study for the first time reveals synergy of electric microfields for enhanced heterogeneous Fenton-like reactions, providing a low-cost and effective strategy for enhanced persulfate catalysis.

Exploring eco-friendly approaches for mitigating pharmaceutical and personal care products in aquatic ecosystems: A sustainability assessment

Global water scarcity is exacerbated by climate change, population growth, and water pollution. Over half of the world's population will be affected by water shortages for at least a month annually by 2050 due toa lack of clean water sources. Even though recycling wastewater helps meet the growing demand, new pollutants, including pharmaceuticals and personal care products (PPCPs), pose a health threat since conventional methods cannot remove them and their environmental monitoring regulations are yet in place. Therefore, the current review aims to investigate and propose eco-friendly technologies for removing PPCPs from wastewater and their implementation strategies for ecosystem safety. Findings indicated the absence of a single wastewater treatment technology that can remove all PPCPs in a single operation. Instead, biotechnological methods are one of the alternatives that can remove PPCPs from aquatic environments. In this context, community involvement and knowledge transfer are identified keys to clean water resources' long-term sustainability.

Catalytic ozonation for imazapic degradation over kelp-derived biochar: Promotional role of N- and S-based active sites

It is a feasible strategy to prepare reliable biochar catalysts for heterogeneous catalytic ozonation (HCO) processes by using inexpensive, high quality, and easily available raw materials. Here, an environmentally friendly, simple, and green biochar catalyst rich in nitrogen (N) and sulfur (S) has been prepared by the pyrolysis of kelp. Compared with directly carbonized kelp biomass (KB), acid-activated KB (KBA) and base-activated KB (KBB) have higher specific surface areas and more extensive porous structures, although only KBB displays effective ozone activation. Imazapic (IMZC), a refractory organic herbicide, was chosen as the target pollutant, which has apparently not hitherto been investigated in the HCO process. Second-order rate constants (k) for the reactions of IMZC with three different reactive oxygen species (ROS), specifically kO3, IMZC, kOH, IMZC, and k1O2, IMZC, have been determined as 0.974, 2.48 × 109, and 6.23 × 105 M-1 s-1, respectively. The amounts of graphitic N and thiophene S derived from the intrinsic N and S showed good correlations with the IMZC degradation rate, implicating them as the main active sites. OH and O2- and 1O2 were identified as main ROS in heterogeneous catalytic ozonation system for IMZC degradation. This study exemplified the utilization of endogenous N and S in biological carbon, and provided more options for the application of advanced oxidation processes and the development of marine resources.

A novel multi-components hierarchical porous composite prepared from solid wastes for benzohydroxamic acid degradation

In this study, a novel carbon-wrapped-iron hierarchical porous catalyst (Fe/C-Mn₈₀₀) was prepared from electrolytic manganese residue (EMR) and sewage sludge (SS), which showed outstanding degradation ability toward benzohydroxamic acid (BHA, nearly 90 % was removed within 60 min) with low metal leaching rate. Mechanism exploration found transition metal ions (Fe and Mn) can serve as electron acceptors and facilitate the generation of persistent free radicals (PFRs). These transition metal ions and PFRs mainly participated in the single-electron pathway via activating PMS to generate a large amount of reactive oxygen species (ROS). While the electron negative graphitic N and CO groups not only improve the electronegatively of catalyst, but also acted as the electron sacrificers to favor the electron transfer and directly oxidized the absorbed BHA through the ternary activated outer-sphere complexes. Eley-Rideal (E-R) and Langmuir-Hinshelwood (L-H) analysis further demonstrated the crucial role of pre-adsorption during the degradation process. This work provided a deep insight into the degradation mechanism of metal/carbon composite and promising opportunity widened the horizon of the high-value utilization of EMR and SS.

Enhanced photocatalytic organic pollutant degradation and H2 evolution reaction over carbon nitride nanosheets: N defects abundant materials

Post thermal treatment of bulk graphitic carbon nitride (g-C₃N₄) by ammonia gas acts as a significant structure regulation approach, while pure ammonia-assisted g-C₃N₄ synthesis from precursors like melamine is rarely investigated. Here we prove the synthesis of N-defects abundant carbon nitride nanosheets (ACN) through a one-pot thermal polymerization of melamine in pure ammonia gas, for photocatalytic organic pollutant removal in water and H₂ evolution applications. Compared to bulk g-C₃N₄ (BCN), ACN-550 (ACN prepared at 550 °C) exhibited thin-layered porous morphology with higher surface area and abundant N defects, resulting in wider distribution of active sites. Moreover, the abundant N defects in the heptazine heterocycle structure could change the electronic structure of g-C₃N₄, leading to more efficient transport of photogenerated charge carriers and enhanced photoreduction potential, which gives rise to notable improvement activities in photocatalytic reaction. With superoxide ion radical and photoinduced holes as the predominant reactive species, ACN-550 realized efficient photocatalytic bisphenol A (BPA) degradation, which is 1.6- and 4.7-fold high over commercial TiO₂ (P25) and BCN, respectively. ACN-550 exhibited excellent reusability and stability in five consecutive photocatalytic BPA degradation tests. In photo-reductive H₂ production system by ACN-550, 761.8 ± 4.3 μmol/h/g H₂ was produced, which was 11.6-fold as high as that by BCN.

The adsorption affinity of N-doped biochar plays a crucial role in peroxydisulfate activation and bisphenol A oxidative degradation

Metal-free biochar to activate persulfate and degrade organic contaminants has attracted great attention in advanced oxidation processes, while the role of biochar adsorption in the activation and oxidative decomposition process still needed to be further clarified. In this study, nitrogen-doped porous biochar derived from a waste litchi branch was prepared as a peroxydisulfate (PDS) activator for bisphenol A (BPA) degradation, in which the regulation behavior of biochar adsorption was evaluated on the basis of phase distribution and PDS activation mechanism. N-doped biochar obtained at 800 °C with urea and sodium bicarbonate added presented a high specific surface area (821 m2/g), abundant nanopores, and a graphitic structure, and showed the best adsorption capacity and catalytic activity toward BPA. At a dosage of 0.15 g/L NBC-800, 95% BPA can be completely degraded within 60 min with an apparent rate constant (kobs) of 0.0483 min-1. The identified active sites and reactive oxygen species as well as electrochemical tests suggested that both free radicals O2•- and •OH and nonradical pathways including 1O2 originated from C = O and surface electron-transfer mechanisms were involved in BPA decomposition. The experiments and activation mechanisms all confirmed that BPA adsorption on the NBC-800 surface was an extremely crucial step for BPA oxidative degradation.

Electronic structure modulation of multi-walled carbon nanotubes using azo dye for inducing non-radical reaction: Effect of graphitic nitrogen and structural defect

Multiwalled carbon nanotube (MWCNT) have a great potential for advanced oxidation process as a metal free catalyst. However, there catalytic activity is very low and needs to be appropriately tuned. Herein, we demonstrate a novel synthesis method for tuning the defect and surface functionality of MWCNT using azo dyes and the catalytic performance was tested for the degradation of different organic contaminates using PMS as an oxidant. The content, type of heteroatom functional groups, and the defect parameters were optimized by varying the pH and concentration of the organic dye. The quenching effect showed that singlet oxygen (¹O₂) is the primary reactive species generated by graphitic nitrogen, which can be boosted by the degree of graphitic structure disruption in MWCNT. The Linear sweep voltammetry (LSV) also confirmed that extrinsic doping enhanced the non-radical degradation by increasing the direct charge transfer rate from MB to PMS. Moreover, the designed catalyst showed a fast degradation performance with 35.1 kJ/mol activation energy and achieved the highest dye degradation rate and even surpassed some state-of-the-art metal-based and metal-free catalysts. The effect of inorganic anions study has also confirmed its industrial applicability.

Efficient Degradation of Printing and Dyeing Wastewater by Lotus Leaf-Based Nitrogen Self-Doped Mesoporous Biochar Activated Persulfate: Synergistic Mechanism of Adsorption and Catalysis

The discharge of printing and dyeing wastewater has been increasing, causing serious environmental pollution with the rapid development of the industry. Based on this, an N self-doped mesoporous lotus leaf biochar (LLC800) was prepared from lotus leaves as raw material for the activation of Persulfate (PS) to degrade wastewater from printing and dyeing. The removal rate of AO7 by PS, LLC800 and LLC800/PS systems were 0.84%, 31.11% and 99.46%, respectively. Electron paramagnetic resonance spectroscopy (EPR) and quench tests showed the presence of free radicals (•OH, SO4●− and O2●−) and nonradical (1O2) in the LLC800/PS system, where nonradicals (1O2) play an important role in the degradation of AO7. The “N self-doped” effect formed by the high N content of lotus leaves is the main factor leading to the high adsorption and catalytic performance of lotus leaf biochar. The effect of pyrolysis temperature on the performance of biochar can be attributed to the change of N content and conformation and specific surface area in biochar. Moreover, the LLC800/PS system has a strong resistance to interference. This work can provide technical support for the preparation of high-performance adsorption-catalytic biochar and the development of high-performance activation materials for persulfate.

Effect of activator/precursor mass ratio on sulfur-doped porous carbon for catalytic oxidation of aqueous organics with persulfate

Sulfur-doped porous carbon has emerged as promising metal-free catalysts toward persulfate (PS) for catalytic oxidation of aqueous organics. Wherein, thermal pyrolysis with activator activation is very common for the preparation of activated carbon. However, the relationship between the mass ratio of activator/precursor and catalytic efficiency has been rarely reported. Herein, a series of sulfur-doped porous carbons (S-AC) were synthesized by one-step chemical activation of (Poly(phenylene sulphide) (PPS)) with K₂CO₃ as activator at K₂CO₃/PPS mass ratio ranging from 0 to 3. The effects of K₂CO₃/PPS mass ratio on its physicochemical properties and its catalytic performance for p-chlorophenol (PCP) degradation with PS were comprehensively investigated. Experiment results show that sulfur doping enhanced its catalytic activity and the sample synthesized with K₂CO₃/PPS mass ratio of 2 (S-AC-2) exhibited the best adsorption and catalytic performance toward PS for PCP removal. More importantly, S-AC-2 with PS could efficiently degrade various aqueous toxic organics other than PCP, and S-AC-2 showed superior catalytic activity to many recently reported advanced materials. In addition, the effects of several operate parameters, including reaction temperature, PS concentration, pH, humic acid, and inorganic ions on PCP oxidation were evaluated. By combining with the results of quenching experiments and EPR, the PS activation mechanism over S-AC-2 was revealed. Moreover, the reusability and regenerability of S-AC-2 was also studied. It indicates that S-AC-2 showed inferior reusability, but the catalytic activity of which could be fully recovered through thermal treatment at 600 °C for 2 h in N₂.

Sulfur or nitrogen-doped rGO supported Fe-Mn bimetal - organic frameworks composite as an efficient heterogeneous catalyst for degradation of sulfamethazine via peroxydisulfate activation

In this work, sulfur/nitrogen modified reduced graphene oxide (S/N-rGO) was employed as both electron shuttle and support to fabricate Fe-Mn bimetallic organic framework@S/N-rGO hybrids (BOF@S/N-rGO) via a facile two-step solvothermal route. Compared with the transition metal ions (Fe²⁺/Mn²⁺), the classical metal oxide catalyst (Fe₂O₃ and Fe₃O₄) and nano zero-valent iron (nZVI), BOF@S/N-rGO catalyst can more effectively activate peroxydisulfate (PDS) with ultra-low concentration (0.05 mM) to degrade sulfamethazine (SMT). Quenching experiments, electron paramagnetic resonance (EPR) measurement and linear sweep voltammetry (LSV) showed that the activation pathways of PDS between the two catalysts were different. In BOF@N-rGO+PDS system, the degradation of SMT was mainly attributed to the oxidation of radicals including SO₄^•- and •OH, especially SO₄•- . However, in BOF@S-rGO+PDS system, in addition to the radical pathway, there are also non-radical pathways, namely ¹O₂ and direct electron transfer. Furthermore, the applicability of BOF@S/N-rGO used in the PDS-mediated advanced oxidation processes (AOPs) was systematically investigated in terms of the effects of operating parameters and coexisting substance (anions and humic acid (HA)), the degradation of other pollutants, as well as the stability and reusability of the catalyst. This study proved that BOF@S/N-rGO was a promising activator of PDS with ultra-low concentration for the degradation of SMT.

Boron doping positively enhances the catalytic activity of carbon materials for the removal of bisphenol A

Boron-doped carbon materials (BCs), low-cost and environmentally friendly carbocatalysts, were prepared for the activation of persulfate (PS) for the removal of bisphenol A (BPA). Compared with B-free carbon materials (Cs), the adsorption and catalytic activity were significantly enhanced by the boron modification. Fast and efficient removal of BPA was achieved using the BCs/PS system. The BPA removal rate constant increased linearly with the adsorption capacity of BCs. Electron paramagnetic resonance (EPR) spectroscopy and radical quenching experiments indicated that the degradation mechanisms in the BCs/PS system were different from conventional radical-based oxidation pathways. On the contrary, nonradical pathways were demonstrated to dominate the oxidation processes in the removal of BPA using the BCs/PS system. Herein, a mechanism is proposed where PS is activated by the carbon material to form a reactive electron-deficient carbocatalyst ([BCs]*) complex with a high redox potential, driving a nonradical oxidation pathway to achieve BPA removal. Through experimental investigation and the use of electrochemical techniques (cyclic voltammetry, Tafel corrosion analysis and open circuit voltages), B-doped carbon materials for the activation of PS elevate the potential of the derived nonradical [BCs]* complexes, and then accelerate the BPA removal efficiency via an electron transfer process. Utilizing adsorption and nonradical oxidation processes, the BCs/PS system possesses great potential for the removal of BPA in practical applications such as wastewater treatment.

Boron-doped carbon materials, based on coffee grounds, sodium bicarbonate and boric acid, were synthesized via a simple hydrothermal process. The ability of a boron-doped carbon material/persulfate system to remove bisphenol A was systematically studied.

Degradation of sulfamethoxazole using PMS activated by cobalt sulfides encapsulated in nitrogen and sulfur co-doped graphene

In this study cobalt sulfides (Co₉S₈) coated on the nitrogen and sulfur co-doped graphene (Co₉S₈@S-N-RG) was firstly prepared and used for degradation of antibiotic sulfamethoxazole (SMX). The results showed that SMX could be completely degraded by Co₉S₈@S-N-RG-activated peroxymonosulfate (PMS) within 20 min with its mineralization efficiency of 38.7%. The SMX degradation rate followed pseudo first-order kinetics with kinetic constant of 0.377 min^-1 that was higher than that induced by Co₉S₈, N-RG, S-N-RG and Co₉S₈@S-RG, indicating Co₉S₈@S-N-RG had superior catalytic activity. Co₉S₈@S-N-RG can activate PMS to produce sulfate radicals and hydroxyl radicals, while sulfate radicals played major role. Co₉S₈ participated in PMS activation in which Co²⁺ was involved in sulfate radicals formation, while sulfur species facilitated the conversion of Co³⁺ to Co²⁺. In addition, carbon defects, CO, pyridinic N and pyrrolic N also contributed to PMS activation.The superior catalytic activity was attributed to the synergistic effect of Co₉S₈ and S-N-RG. This study could provide an efficient and stable PMS activator, and insight into the PMS activation mechanism by Co₉S₈@S-N-RG.

Graphitic biochar with in situ confined magnetic iron oxides via synchronous pyrolysis of lignin as an effective H2O2 activator for fast degradation of organic pollutants

Magnetic iron oxide confined in carbon capsules/biochar composite (FeOx@g-BC) was created using in-situ synchronous pyrolysis of alkali lignin as a low-cost carbon source. Characterization results indicated the FeOx was confined in carbon nanotubes and carbon capsules, inhibiting growing of nanoparticles and deactivation. The composite catalyst demonstrated significant activity in activating H₂O₂ for the degradation of persistent organic pollutants in water over a wide pH range. Particularly, tetracycline (TC) could be completely degraded within 25 min, even at a high pH of 6.8, which performed much better than previously reported Fenton-like catalysts. Moreover, the excellent magnetism of FeOx@g-BC aided in its recovery and reuse. The stability of FeOx@g-BC recycling was also measured by continuous cycles of reactions. According to ESR analysis and free radical quenching studies, OH and ¹O₂ were discovered as the dominant active species governing the degradation of TC, and two pathways of TC degradation were proposed. This study developed a novel heterogeneous catalyst for catalytic degradation of persistent organic contaminants in water by the value-added usage of lignin.

Carbon materials in persulfate-based advanced oxidation processes: The roles and construction of active sites

Many researchers have paid more attention to the progress of carbon materials owing to their advantages, such as high activity, low cost, large surface area, high conductivity and high stability. Carbon materials have been widely used in persulfate-based advanced oxidation processes (PS-AOPs), especially for graphene (G), carbon nanotubes (CNTs) and biochar (BC). Various strategies are applied to promote their activity, however, up to now, the relationship between the structures of carbon materials and their activities in PS-AOPs has not been specifically reviewed. The methods to switch reaction pathway (radical and nonradical pathways) in carbon-persulfate-based AOPs have not been systematically explored. Hereon, this review illustrated the active sites of G, CNTs, BC and other carbon materials, and generalized the modification methods to promote the activity of carbon materials and to switch reaction pathway in PS-AOPs. The roles of carbon materials in PS-AOPs were discussed around reactive oxygen species (ROS) and the structures. ROS are frequently complex in AOPs, but main ROS generation is related to the active sites on carbon materials. The structures of carbon materials (e.g., metal-carbon bonds, the electron-deficient C atoms, unbalanced electron distribution and graphitized structures) play a decisive role in the nonradical pathway. Finally, future breakthroughs of carbon materials were proposed for practical engineering and multi-field application.

Sulfur-modified chitosan derived N,S-co-doped carbon as a bifunctional material for adsorption and catalytic degradation sulfamethoxazole by persulfate

N,S-co-doped carbons were synthesized through the calcination of sulfur-modified chitosan for the first time, and utilized as persulfate activators for sulfamethoxazole (SMX) remediation in water. The chitosan and sulfonyl chloride underwent one-step sulfonylation reaction to generate S-modified chitosan. The catalyst NSC-3 showed both excellent adsorption and catalytic oxidation efficiency, corresponding 98.62% removal and 81.34% mineralization rate within 90 min. The rate constant (k_obs) was up to 0.0578 min^-1, with 75.60-folders higher than that of sulfur-free catalyst NC (7.6580 ×10^-4 min^-1). The synergy of N and S contributed to the improvement of removal efficiency. The adsorption and oxidation performance were highly depended on the S/N atomic ratio. At the S/N ratio of 0.18, the maximum adsorption and oxidation capability were obtained. The NSC-3/PS system exhibited outstanding adaptability at the wide pH range from 3.07 to 9.28, while the inhibitory effect occurred at strong basic conditions (pH = 11.01). The thiophene sulfur and structural defects were identified as the catalytic sites in activating PS. Both radical and non-radical pathways were responsible for degradation process, where ¹O₂ played a major role, SO₄^·-exerted a minor contribution, and O₂^·- acts as the precursor for the production of ¹O₂. Another source of ¹O₂ was assigned to the activation of PS by structure defects. This work indicates that N,S-co-doped carbon at an optimal S/N atomic ratio effectively catalyzes persulfate, and provides an innovative method to construct bifunctional carbon materials of adsorption and oxidization.

Synergistic oxytetracycline adsorption and peroxydisulfate-driven oxidation on nitrogen and sulfur co-doped porous carbon spheres

Metal-free carbonaceous catalysts are receiving increasing attention in wastewater treatment. Here, nitrogen and sulfur co-doped carbon sphere catalysts (N,S-CSs₉₀₀-OH) were synthesized using glucose and L-cysteine via a hydrothermal method and high temperature alkali activation. The N,S-CSs₉₀₀-10%-OH exhibited excellent catalytic performance for the degradation of oxytetracycline (OTC). The degradation rate was 95.9% in 60 min, and the reaction equilibrium rate constant was 0.0735 min^-1 (k_0-15 min). The synergistic effect of adsorption-promoting degradation was demonstrated in the removal process of OTC. The excellent adsorption capacity of N,S-CSs₉₀₀-10%-OH ensured the efficient oxidation of OTC. N,S-CSs₉₀₀-10%-OH reduced the activation energy of the OTC degradation reaction (Ea=18.23 kJ/mol). Moreover, the pyrrolic N, thiophene S and carbon skeleton played an important role in the degradation of OTC based on density function theory, and the catalytic mechanism was expounded through radical and nonradical pathways. The active species involved in the reaction were O₂^•-, ¹O₂, SO₄^•- and •OH, of which O₂^•- was the primary reactive species. This study provides a new insight into the reaction mechanism for efficient treatment of organic pollutants using metal-free doped porous carbon materials.

Kinetics and mechanism of synergistic adsorption and persulfate activation by N-doped porous carbon for antibiotics removals in single and binary solutions

Porous carbon serves as a green material for efficient wastewater purification by adsorption and advanced oxidation processes. However, a clear understanding of the simultaneous removal of multiple pollutants in water is still ambiguous. Herein, the synergistic effect of adsorption and peroxydisulfate (PS) activation on kinetics and mechanism of removing single and binary antibiotic pollutants, sulfamethoxazole (SMX) and ibuprofen (IBP), from water by biomass-derived N-doped porous carbon was investigated. Our findings suggest that adsorption contributed to efficient removals of SMX/IBP. Comparative quenching experiments and electrochemical analysis demonstrated that hydroxyl (•OH) and sulfate (SO₄^•-) radicals, as well as singlet oxygen (¹O₂) led to the catalytic degradation of SMX, while only ¹O₂ reacted for IBP oxidation. Superoxide ion (O₂^•-) radicals were not related to SMX/IBP degradation. Electron transfer pathway accounted for PS activation but was not involved in direct SMX/IBP oxidation. Only slight differences were found between the degradation kinetics of SMX and IBP in the binary and single SMX or IBP solutions. This arose from the non-selective effect of adsorption and ¹O₂ attack for SMX/IBP removal, and the weak selective oxidation process of SMX by •OH and SO₄^•-. This study provides a new viewpoint on the role of adsorption in catalysis and enriches the mechanistic study of multi-component antibiotic degradation.

Catalytic degradation of sulfamethoxazole by peroxymonosulfate activation system composed of nitrogen-doped biochar from pomelo peel: Important roles of defects and nitrogen, and detoxification of intermediates

Nitrogen doping could improve the catalytic performance of carbon materials, in which the nitrogen configuration could be used as active sites for peroxymonosulfate (PMS) activation. Herein, this paper studied how to turn waste to "treasure" by agriculture waste pomelo peel to prepare nitrogen-doped biochar and successfully applied it to advanced oxidation field. The effects of the sodium bicarbonate (NaHCO₃), melamine, and pyrolysis temperature on the catalytic activity of biochar for the removal of sulfamethoxazole (SMX) were investigated. The optimized nitrogen-doped biochar (C-N-M 1:3:4) possessed high specific surface area (SSA, 738 m²/g) and high level of nitrogen doping (nitrogen content 13.54 at%). Accordingly, it exhibited great catalytic performance for PMS activation to remove SMX antibiotic, and 95% of SMX was removed within 30 min. High catalytic activity of C-N-M 1:3:4 was attributed to rich defects, carbonyl group, high content of graphitic N and pyrrolic N, and large SSA, in which non-radical oxidation process based on singlet oxygen (¹O₂) and electron transfer contributed to the SMX degradation. The prepared nitrogen-doped biochar possessed high stability and reusability and the removal efficiency of SMX still reached 80% after four cycles. Additionally, the phytotoxicity assay indicated that the toxicity of degradation intermediates was obviously decreased in the PMS/ C-N-M 1:3:4 system.

Tetracycline removal via adsorption and metal-free catalysis with 3D macroscopic N-doped porous carbon nanosheets: Non-radical mechanism and degradation pathway

Recently, metal-based carbon materials have been verified to be an effective persulfate activator, but secondary pollution caused by metal leaching is inevitable. Hence, a green metal-free 3D macroscopic N-doped porous carbon nanosheets (NPCN) was synthesized successfully. The obtained NPCN showed high adsorption capacity of tetracycline (TC) and excellent persulfate (PS) activation ability, especially when calcined at 700 °C (NPCN-700). The maximum adsorption capacity of NPCN-700 was 121.51 mg/g by H-bonds interactions. Moreover, the adsorption process followed pseudo-second-order kinetics model and Langmuir adsorption isotherm. The large specific surface area (365.27 mg/g) and hierarchical porous structure of NPCN-700 reduced the mass transfer resistance and increased the adsorption capacity. About 96.39% of TC was removed after adding PS. The effective adsorption of the catalyst greatly shortened the time for the target organic molecules to migrate to the catalyst. Moreover, the NPCN-700 demonstrated high reusability with the TC removal rate of 80.23% after 4 cycles. Quenching experiment and electron paramagnetic resonance (EPR) test confirmed the non-radical mechanism dominated by ¹O₂. More importantly, the C = O groups, defects and Graphitic N acted as active sites to generate ¹O₂. Correspondingly, electrochemical measurement revealed the direct electron transfer pathway of TC degradation. Finally, multiple degradation intermediates were recognized by the LC-MS measurement and three possible degradation pathways were proposed. Overall, the prepared NPCN had excellent application prospects for removal of antibiotics due to its remarkable adsorption and catalytic degradation capabilities.

MOF-derived biochar composites for enhanced high performance photocatalytic degradation of tetracycline hydrochloride

Biochar reinforced advanced nanocomposites are of interest to a wide circle of researchers. Herein, we describe a novel MOF-derived reinforced cow dung biochar composite, which was prepared by a one-step hydrothermal method to form the MOF MIL-125(Ti) onto a nitrogen and sulfur co-doped bio-carbon (NSCDBC). The UV-vis diffuse reflectance spectrum of NSCDBC/MIL-125(Ti) exhibits an extension of light absorption in the visible region (360–800 nm), indicating its higher visible light capture capacity relative to pure MIL-125(Ti). The photocatalytic activity results show that all the NSCDBC/MIL-125(Ti) composite samples, namely NSCM-5, NSCM-10, NSCM-20 and NSCM-30 display good performance in the removal of tetracycline hydrochloride compared to pure MIL-125(Ti). Among them, NSCM-20 exhibits the highest catalytic activity with a removal rate of 94.62%, which is attributed to the excellent adsorption ability of NSCDBC and the ability to inhibit the complexation of photogenerated electron–hole pairs. Photoluminescence verifies that the loading of biochar successfully enhances the separation of photogenerated electron–hole pairs. Subsequently, the active species in the photocatalytic process are identified by using electron spin resonance spin-trap techniques and free radical trapping experiments. Finally, the possible reaction mechanism for the photocatalytic process is revealed. These results confirm that NSCDBC/MIL-125(Ti) is a potentially low-cost, green photocatalyst for water quality improvement.

Schematic diagram of fabricating process of NSCDBC/MIL-125(Ti).

Electrosorption of cadmium and arsenic from wastewaters using nitrogen-doped biochar: Mechanism and application

Biochar has been widely applied as an adsorbent, whose electrochemical capacity and heavy metal adsorption performance can be improved by nitrogen doping. In this work, nitrogen-doped biochar (NBC) was synthesized by calcinating sodium humate with sodium bicarbonate (NaHCO₃) and urea as the activation agent and nitrogen source, respectively. The NBC was then used to electrochemically adsorb Cd(II) and As(III,V) from simulated and actual wastewaters, respectively. The results indicated that NaHCO₃ activation and nitrogen doping could increase the surface area and nitrogen content of the biochar, contributing to the enhancement of adsorption performance for Cd(II) and As(III,V). The electrosorption capacities for Cd(II) and total arsenic (As(T)) increased first and then reached equilibrium with increasing nitrogen content, increased first and then decreased with increasing calcination temperature, and consistently increased with increasing voltage. The Cd(II) electrosorption capacity (79.0 mg g^-1) and As(T) removal ratio (94.0%) at 1.2 V in actual As-contaminated wastewater (1.16 mg L^-1) were about 4 and 2.6 folds of their inorganic adsorption capacities, respectively. After five cycles of reuse, the Cd(II) and As(T) removal ratio could be maintained at 65.8% and 51.7% of the initial electrosorption capacity. This work expands the application of NBC for heavy metal removal.

Co-oxidative removal of arsenite and tetracycline based on a heterogeneous Fenton-like reaction using iron nanoparticles-impregnated biochar

A highly efficient, eco-friendly and relatively low-cost catalyst is necessary to tackle bottlenecks in the treatment of industrial wastewater laden with heavy metals and antibiotic such as livestock farm and biogas liquids. This study investigated co-oxidative removal of arsenite (As(III)) and tetracycline (TC) by iron nanoparticles (Fe NP)-impregnated carbons based on heterogeneous Fenton-like reactions. The composites included Fe NP@biochar (BC), Fe NP@hydrochar (HC), and Fe NP@HC-derived pyrolysis char (HDPC). The functions of N and S atoms and the loading mass of the Fe NP in the Fe NP@BC in heterogeneous Fenton-like reactions were studied. To sustain its cost-effectiveness, the spent Fe NP@BC was regenerated using NaOH. Among the composites, the Fe NP@BC achieved an almost complete removal of As(III) and TC under optimized conditions (1.0 g/L of dose; 10 mM H₂O₂; pH 6; 4 h of reaction; As(III): 50 μM; TC: 50 μM). The co-oxidative removal of As(III) and TC by the Fe NP@ BC was controlled by the synergistic interactions between the Fe NPs and the active N and S sites of the BC for generating reactive oxygen species (ROS). After four consecutive regeneration cycles, about 61 and 95% of As(III) and TC removal were attained. This implies that the spent carbocatalyst still has reasonable catalytic activities for reuse. Overall, this suggests that adding technological values to unused biochar as a carbocatalyst like Fe NP@BC was promising for co-oxidative removal of As(III) and TC from contaminated water.

Preparation of Manganese Blending-Modified Activated Coke for Flue Gas Desulfurization

In this study, the preparation and desulfurization application of MnO₂ and pyrolusite blending-modified activated cokes (ACM and ACP) were studied. Thermodynamic calculation shows that the blended metal oxides could be reacted with the solid carbon and gaseous products H₂, CO, and CO₂ for activation. The physicochemical properties of the blending-modified ACP and ACM responded considerably differently to preparation conditions. The blended metal oxide significantly improved the mesoporous structure of the modified activated cokes, as well as the surface acidic and basic functional groups. Different metal oxides played different roles in the pore structure and surface functional group evolution, and the current investigation indicates that MnO₂ is more favorable than pyrolusite. The enhanced acidic and basic functional groups, coupled with the catalysis of metal oxides, improved the desulfurization performance of the modified activated cokes. The sulfur capacities of the prepared ACP and ACM were 47.9-208.9 and 119.4-205.9 mg/g, respectively, which were much greater than the sulfur capacity of the fresh activated coke.

Graphitic carbon nitride nanosheets via acid pretreatments for promoted photocatalysis toward degradation of organic pollutants

Acid treatment serves as an effective engineering strategy to modify the structure of graphitic carbon nitride (g-C₃N₄) for enhanced metal-free photocatalysis, while their lacks a comprehensive understanding about the impacts of different acid species and acid treatment approaches on the intrinsic structure and properties of g-C₃N₄ and structure-activity relationships are ambiguous. Employing inorganic/organic acids including hydrochloric acid (HCl), nitric acid (HNO₃), acetic acid (HAc), sulphuric acid (H₂SO₄), or oxalic acid (H₂C₂O₄) as treatment acids, herein, we compare the impacts of different acid pretreatment approaches on the structure and properties of g-C₃N₄. Due to different acid-melamine interaction modes and the activation roles of various acids, the obtained g-C₃N₄ samples exhibit varied structures, physiochemical properties and photocatalytic activities. Compared with bulk graphitic carbon nitride (BCN), g-C₃N₄ prepared by acid pretreatment show enhanced photocatalytic performance on bisphenol A (BPA) degradation. The photocatalytic degradation rates of BPA by g-C₃N₄ prepared by HNO₃, HAc, H₂SO₄, H₂C₂O₄, or HCl pretreatment are about 2.2, 2.7, 2.8, 3.2 and 3.8 folds faster than that by BCN. HCl pretreatment proves to be the optimal approach, with the derived g-C₃N₄ (HTCN) showing more intact heptazine structural units, and increased specific surface area, which promote the exposure of more active sites, accelerate charge transfer, and give rise to a notable improvement in photocatalysis, eventually. Mechanistic investigations through quenching experiments and electron paramagnetic resonance (EPR) characterization unveil that superoxide ion radical (O₂^-) and photo-induced holes (h⁺) worked principally in the photodegradation reaction. This work provides new insights for the rational selection of acid types and treatment methods to synthesize metal-free carbon nitrides with improved activity for photocatalytic applications.

Generation of hydroxyl radicals by metal-free bifunctional electrocatalysts for enhanced organics removal

Low yields of H₂O₂ and a narrow range of appropriate pH values have been two major drawbacks for electro-Fenton (EF) process. Herein, metal-free electrochemical advanced oxidation processes (EAOPs) were developed with nitrogen and sulfur co-doped electrochemically exfoliated graphene (N, S-EEGr) electrocatalysts, which was confirmed as an outstanding bifunctional catalyst for synchronous generation and activation of H₂O₂ via (2 + 1) e^- consecutive reduction reactions. Specifically, two elements (N, S) in metal-free N, S-EEGr-CF cathode synergize to promote the formation of H₂O₂ followed by its activation. With N, S-EEGr-CF cathode, phenol of initial 50 mg L^-1 could be effectively removed within pH 3-11 and 6.25 mA cm^-2, and 100% removal efficiency could be achieved within 15-min even at neutral pH. The pseudo-first-order rate constant for phenol removal in metal-free EAOPs with N,S-EEGr-CF at neutral pH was 10 times higher than that with EF process. Detection of active species, coupled with decay kinetics with specific trapping agents, confirmed that OH was the dominant oxidizing species promoting removal efficiencies of organics (phenol, antibiotics and dyes) at pH 3 and pH 7. In the actual wastewater treatment, the synergistic effect of bifunctional catalyst would also be used for improving the degradation efficiency of organics. Thus, the metal-free EAOPs with N,S-EEGr-CF cathode may serve as an alternative in wastewater treatment with a broadened range of solution pH values and avoiding Fe²⁺ (catalyst) addition.

Mechanistic evaluation of metformin drug confiscation from liquid phase on itaconic acid/kaolin hydrogel nanocomposite

Herein, kaolin (K) was amended by a novel gemini surfactant to attain nano-kaolin (nK), which was subsequently employed as a cross-linker in the preparation of itaconic acid/kaolin hydrogel nanocomposite (IA/nK) via free radical polymerization route employing the sonochemical technique, which has been used for the first time to extract metformin (MF) from water solution. The aspects which affect sorption behavior of IA/nK on metformin (MF) were systematically investigated via batch experiments, in harmony with effect of sorbent dosage, contact time, pH, MF concentration, equilibrium curves, kinetic behavior, and thermodynamic parameters. BET studies of IA/nK exhibited S_BET of 106.42 m²g^-1, pore volume 0.281 cm³ g^-1, and a pore radius of 16.627 Å. Kinetic and isotherm modelling portrayed that pseudo-second order and Freundlich model appropriated adsorption data with maximum sorption capacity of 278.35 mg g^-1. Thermodynamic parameters ΔH^O (13.67 kJmol^-1) and ΔG^O (-7.648 kJmol^-1) revealed that sequestration of MF on IA/nK was endothermic, spontaneous, and dominated by physisorption. Molecular docking study along with X-ray photoelectron spectroscopy inferred electrostatic interaction and hydrogen bonding as main mechanism of MF removal. IA/nK demonstrated dose-reliant inhibition of both gram-positive and gram-negative bacterial strains. IA/nK demonstrated good regeneration properties, up to four cycles without considerable decrease in its efficacy. The admirable sorption capacity coupled with good reusability, and low toxicity substantiates IA/nK as promising adsorbent for MF confiscation.

Thiourea-assisted one-step fabrication of a novel nitrogen and sulfur co-doped biochar from nanocellulose as metal-free catalyst for efficient activation of peroxymonosulfate

The N, S co-doped biochar (N, S-BC) with multistage pore structure was successfully synthesized from nanocellulose and thiourea by one-step pyrolysis, which could effectively activate peroxymonosulfate (PMS) to degrade sulfamethoxazole (SMX) in water. Moreover, the removal efficiency of SMX by this oxidation system was 2.3-3.1 times than that of other systems activated by common metal oxides (such as Fe₃O₄、Fe₂O₃, and MnO₂). More importantly, the mechanism of the N, S-BC/PMS process was deduced by reactive oxygen species (ROS) quenching experiment and electron paramagnetic resonance (EPR) test, which exhibited that surface-bound free radicals and singlet oxygen (¹O₂) played an essential role in the SMX degradation. Surprisingly, the sulfate radical (SO₄^•-) and hydroxyl radical (^•OH) produced in this system existed in a bound state on the surface of the carbon catalyst to react with SMX, rather than dispersed in the aqueous solution. This particular form of free radicals could resist the influence of background substances and pH changes in water, and maintain excellent SMX degradation efficiency under different water matrices and pH. This study provides a new insight into the application of carbon catalyst in actual water pollution control.

Pore volume upgrade of biochar from spent coffee grounds by sodium bicarbonate during torrefaction

A novel approach for upgrading the pore volume of biochar at low temperatures using a green additive of sodium bicarbonate (NaHCO₃) is developed in this study. The biochar was produced from spent coffee grounds (SCGs) torrefied at different temperatures (200-300 °C) with different residence times (30-60 min) and NaHCO₃ concentrations (0-8.3 wt%). The results reveal that the total pore volume of biochar increases with rising temperature, residence time, or NaHCO₃ aqueous solution concentration, whereas the bulk density has an opposite trend. The specific surface area and total pore volume of pore-forming SCG from 300 °C torrefaction for 60 min with an 8.3 wt% NaHCO₃ solution (300-TP-SCG) are 42.050 m² g^-1 and 0.1389 cm³·g^-1, accounting for the improvements of 141% and 76%, respectively, compared to the parent SCG. The contact angle (126°) and water activity (0.48 aw) of 300-TP-SCG reveal that it has long storage time. The CO₂ uptake capacity of 300-TP-SCG is 0.32 mmol g^-1, rendering a 39% improvement relative to 300-TSCG, namely, SCG torrefied at 300 °C for 60 min. 300-TP-SCG has higher HHV (28.31 MJ·kg^-1) and lower ignition temperature (252 °C). Overall, it indicates 300-TP-SCG is a potential fuel substitute for coal. This study has successfully produced mesoporous biochar at low temperatures to fulfill "3E", namely, energy (biofuel), environment (biowaste reuse solid waste), and circular economy (bioadsorbent).