Zirconia (ZrO2) Embedded in Carbon Nanowires via Electrospinning for Efficient Arsenic Removal from Water Combined with DFT Studies

Interfacial and Electronic Modulation of M-Bridged Heterostructures with L-Tryptophan and Transition Metallic Oxides: Enhancing Corrosion Resistance and Photocatalytic Activity

Despite remarkable advancements in multilayer composite materials, achieving controlled growth on stationary platforms for optimal corrosion protection and photocatalytic capabilities remains a challenge. In this study, we introduce an innovative approach by integrating bifunctional metal-organic frameworks (MOFs) into plasma-electrolyzed layers made on AZ31 Mg alloy. Metallic oxides of Zr, Ti, and W serve as new pivotal centers for MOF formation, while L-tryptophan (Trp) acts as an organic linker. This innovative approach establishes an efficient electron transport system that acts as a functional pathway for creating highly effective and versatile materials. The tunable structure of the MOF/plasma electrolyzed layer enables it to concurrently display electrochemical stability and photocatalytic activity for the photodegradation of organic pollutants. Remarkably, the WOF complex emerges as a standout performer, effectively shielding the substrate from corrosive anion attacks. This sample showcases exceptional photocatalytic efficiency of 99.61% for crystal violet solution, with sustained performance after five cycles and a 72 h corrosion test (96.55% and 98.39% degradation, respectively). Moreover, DFT calculations elucidate the fundamental bonding modes between MOFs and inorganic constituents, delivering comprehensive insights into their structural formation. Our research addresses the critical challenge of achieving controlled growth for enhanced corrosion resistance and photocatalytic activity, demonstrating a novel pathway for creating multifunctional materials with practical applications across various fields.

Stabilizing High Density Cu Active Sites with ZrO2 Quantum Dots as Chemical Ligand in N-doped Porous Carbon Nanofibers for Efficient ORR

The emerging transition metal-nitrogen-carbon (MNC) materials are considered as a promising oxygen reduction reaction (ORR) catalyst system to substitute expensive Pt/C catalysts due to their high surface area and potential high catalytic activity. However, MNC catalysts are easy to be attacked by the ORR byproducts that easily lead to the deactivation of metal active sites. Moreover, a high metal loading affects the mass transfer and stability, but a low loading delivers inferior catalytic activity. Here, a new strategy of designing ZrO₂ quantum dots and N-complex as dual chemical ligands in N-doped bubble-like porous carbon nanofibers (N-BPCNFs) to stabilize copper (Cu) by forming CuZrO_3-x /ZrO₂ heterostructures and CuN ligands with a high loading of 40.5 wt.% is reported. While the highly porous architecture design of N-BPCNFs builds a large solidelectrolytegas phase interface and promotes mass transfer. The preliminary results show that the half-wave potential of the catalyst reaches 0.856 V, and only decreases 0.026 V after 10 000 cycles, exhibiting excellent stability. The proposed strategy of stabilizing metal active sites with both heterostructures and CuN ligands is feasible and scalable for developing high metal loading ORR catalyst.

Heterogenous Cu@ZrO2 nanofibers enable efficient electrocatalytic nitrate reduction to ammonia under ambient conditions

In this study, we construct a Cu@ZrO₂ heterogenous structure as a new catalyst that achieves a large NH₃ yield of 15.4 mg h^-1 mg^-1_cat. and a high faradaic efficiency of 67.6% at -0.7 V vs. RHE in 0.1 M PBS with 0.1 M NaNO₃, and it also shows excellent electrochemical durability and structural stability. Theoretical calculations reveal an extremely low adsorption energy of -1.54 eV at Cu surfaces and Cu can significantly reduce the applied overpotential and correspondingly promote the catalytic activity.

Dissolved organic matters-enhanced Pb releases from nano- or submicron Pb sulfides and oxides

Diverse lead (Pb) particles possess different ecological risks not only due to their own toxicity differences but also because of different abilities to release toxic dissolved Pb. Dissolved organic matter (DOM) was a key factor influencing dissolution processes of metal particles. However, impacts of DOM on dissolution of different Pb nano- or submicron particles were not known yet. Herein, impacts of DOM on dissolution kinetics of lead sulfide (PbS), lead sulfate (PbSO₄), lead monoxide (PbO), lead tetroxide (Pb₃O₄) and lead dioxide (PbO₂) nano- or submicron particles were firstly investigated taking Pahokee Peat humic acid (PPHA) as an example. Results indicated PPHA improved the suspending stability of Pb particles through electrostatic repulsion, and enhanced releases of dissolved Pb. Final concentration of dissolved Pb was raised by 1.22-8.82 times with PPHA. This was attributed to ligand exchange interactions between PPHA and Pb particles. Theoretical computations indicated that not only sorption or ligand exchange energy, but also numbers of ligands on the surface of particles were key factors governing impacts of PPHA on dissolved Pb. This study provided a new mechanism insight into dissolution behavior of various Pb particles and will be beneficial to their ecological risk assessment.

Nanocomposites of immobilized nano-zirconia on low-cost activated carbon derived from hazelnut shell for enhanced removal of 3-Nitro-4-Hydroxy-Phenylarsonic acid from water

3-Nitro-4-hydroxy-phenylarsonic acid (NHPA) as a veterinary drug can degraded into highly toxic inorganic arsenic and will be harmful to environment and food safety. Nanocomposites for the uptake of NHPA were obtained by efficiently immobilizing the nano-sized zirconium oxide onto hazelnut shell-based activated carbon using pyrolysis method. We found that the pyrolysis temperature played a crucial role in the adsorptive performances of the nanocomposites. The prepared nanocomposite at pyrolysis temperature of 600 °C with a mass ratio of ZrOCl₂/activated carbon of 1:3 exhibited a fast adsorption equilibrium for NHPA within 5 min, excellent adsorption capacity of 825.7 mg g^-1 and the higher adsorption capacity with the increase in temperature from 20 to 45 °C across a pH range of 4-6. 90% of the NHPA uptake was sustained in the NaNO₃ solution of 0.7 mol L^-1. The adsorption data were well simulated by the Langmuir and pseudo-second order equations. Thermodynamic parameters suggested that the uptake of the NHPA occurred spontaneously (ΔG⁰<0) with an endothermic characteristic (ΔH⁰>0). A synergetic effect of electrostatic attraction, As-O-Zr surface coordination and π-π interaction is the main adsorption mechanism of the nanocomposites for the removal of the NHPA.

Novel g-C3N4/Cu-doped ZrO2 hybrid heterostructures for efficient photocatalytic Cr(VI) photoreduction and electrochemical energy storage applications

Pure ZrO₂, graphitic carbon nitride, Cu-doped ZrO₂ nanoparticles (Cu-Zr), and doped Cu-Zr nanoparticles decorated on the g-C₃N₄ surface (g-CuZr nanohybrids) were successfully prepared by a hydrothermal technique. Synthesized catalysts were examined by XRD, FE-SEM, TEM, UV-Vis spectroscopy, photoluminescence (PL), and BET surface measurements, respectively. The photocatalytic reduction of Cr(VI) photoreduction as well as energy storage supercapacitor applications were thoroughly investigated. The g-CuZr hybrid photocatalyst outperformed other pristine photocatalysts in terms of light absorption and catalytic Cr(VI) reduction performance under stimulated solar light irradiation. Furthermore, methylene blue (MB) was used as a photosensitizer to further improve the Cr(VI) photoreduction performance. In precise, the heterostructured hybrid catalyst exhibited improved photocatalytic Cr(VI) photoreduction activity (∼88.1%) in 5 mg/L MB solution over other catalysts. Moreover, the decoration of Cu-Zr on the surface of g-C₃N₄ enhanced the absorption ability of light and catalytic Cr(VI) photoreduction performance. The PL, EIS, and transient photocurrent analysis demonstrated that the efficiency of the charge carrier's separation in the nanohybrid catalyst was superior over other catalysts. Furthermore, heterostructured g-CuZr nanohybrid electrode exhibited superior specific capacitance (297.2 F/g) over other electrodes, which are 5.5 folds (54.01 F/g), ∼2 folds (144.01 F/g) better than pure ZrO₂ and g-C₃N₄ electrodes. Likewise, the nanohybrid electrode retained about 90% of the capacitive value after 2500 cycles over its initial capacitance.

UiO-66(Zr)-derived t-zirconia with abundant lattice defect for remarkably enhanced arsenic removal

Zirconium oxide (ZrO₂) exhibits great potential in the remediation of arsenic-polluted water. In this study, tetragonal zirconium oxide (t-ZrO₂) with high lattice defects was facilely fabricated by regulating the Zr-metal-organic framework (MOF) (UiO-66) with sodium acetate modulator and examined to adsorb arsenic from water. Benefitting from the synergistic effects of mesopores structure and lattice defect, t-ZrO₂ exhibited ultrahigh adsorption capacity and faster kinetics towards both arsenate (As(V)) and arsenite (As(III)). The Langmuir adsorption capacity for As(V) and As(III) of 147.5 mg g^-1 and 352.1 mg g^-1 on t-ZrO₂ in exothermic process, respectively, significantly outperforming reported counterparts in literature (generally ≤100 mg g^-1). The faster adsorption kinetic of both As(III) and As(V) on t-ZrO₂ is defined favorably by the pseudo-second-order model over a wide pH (3-11). Furthermore, arsenic is mainly captured by t-ZrO₂ via forming Zr-O-As bonds through occupying coordinatively unsaturated zirconium atoms adsorption sites revealed by the X-ray photoelectron spectroscopy (XPS) spectrum and Fourier-transformed infrared (FTIR) spectra analysis. This study offers a new strategy for designing ultrahigh performance Zr-MOF-derived adsorbents for capturing arsenic.

Insight into the Mechanism of Arsenic(III/V) Uptake on Mesoporous Zerovalent Iron-Magnetite Nanocomposites: Adsorption and Microscopic Studies

Mesoporous zerovalent iron-magnetite nanocomposites (ZVI-MNCs) were developed to circumvent the limitations of magnetite, such as its susceptibility to phase transition in air-water interfaces. High-resolution transmission electron microscopy images revealed the presence of Fe⁰ and Fe₃O₄ in the as-prepared adsorbent. High-resolution X-ray photoelectron spectroscopy (HR-XPS) Fe 2p deconvoluted spectra showed that electron transfer between Fe⁰ and Fe₃O₄ controlled the magnetite transformation. The isotherm equilibrium data for As(III) and As(V) are described by the Sips model, which suggests single- and multilayer formation onto a heterogeneous surface with different binding sites, whereas adsorption is controlled by a pseudo-second-order kinetic model, which indicates chemisorption. The maximum sorption capacities (q_m) for As(III) and As(V) are 632.6 and 1000 μmol g^-1, respectively, which are larger than the q_m of similar adsorbents. The greater q_m for As(V) is attributed to a higher multilayer formation and a stronger bonding force compared with As(III). The arsenic uptake capacity showed that the as-prepared adsorbent was effective over a wide pH range, and an optimal uptake capacity was recorded between pH 5.0 and 9.0 for As(III) and 3.0 and 7.0 for As(V). The adsorbent exhibited a remarkable regeneration performance for As(III) and As(V) uptake. Several microscopic analytical tools, including Fourier transform infrared spectroscopy, HR-XPS, and X-ray absorption near-edge structure together with zeta potential, confirmed that the binding mode of As(III) and As(V) on ZVI-MNCs was predominantly inner-sphere coordination. Partial redox transformation occurred for As(III) and As(V) on nearly 10 nm of the adsorbent, which indicates that a surface redox mechanism contributed partially to arsenic uptake on the near surface of the ZVI-MNCs. Extended X-ray absorption fine structure spectral analysis proposed that a corner-sharing monodentate mononuclear (¹V) complex occurred for As(III) with a small portion of a corner-sharing bidentate binuclear (²C) complex, whereas As(V) formed a corner-sharing bidentate binuclear (²C) complex with octahedral Fe bonding.

Evaluation of the performance of zirconia-multiwalled carbon nanotube nanoheterostructures in adsorbing As(III) from potable water from the perspective of physical chemistry and chemical physics with a special emphasis on approximate site energy distribution

In this study, the performance of zirconia-multiwalled carbon-nanotube nanoheterostructure in adsorbing the highly toxic water-contaminant As(III) from water has been probed from the perspective of physical chemistry and chemical physics. The adsorbent found extremely efficient in adsorbing As(III) from potable water. Moreover, its ability to oxidize As(III) to As(V) in the aqueous solution has been evinced by the XPS studies. The values of the maximum adsorption capacities (q_m) depend on the isotherm studied and in this study, no wonder different values of q_m are obtained for different adsorption isotherms. The thermodynamic studies advocate the exothermic and spontaneous nature of the adsorption process. Calculation on density functional theory (DFT) also suggested the exothermic nature of the adsorption process. DFT calculation further revealed the role of the Zr-O and Zr-OH bridges in binding As(III) species on the zirconia surface. However, this study finds an adverse effect of visible light-irradiation on the adsorption process. Furthermore, this study propounds an approach to estimate the maximum solubility of As(III) in water combining the Cerofolini's condensation-approximation and Polanyi adsorption potential. Detailed analysis on the approximate adsorption site energy distribution (f(E*)) further finds an inconsistency in the formula used to estimate q_m using f(E*), which underestimates q_m. The inconsistency, for the very first time, has successfully been resolved by modifying the heterogeneity related parameter in f(E*).

Adsorption of arsenite by core–shell K-OMS-2@UiO-66 microspheres: performance and mechanism

Arsenite (As(iii)) is more toxic and more difficult to remove from water than arsenate (As(v)).

Efficient removal of arsenic from groundwater using iron oxide nanoneedle array-decorated biochar fibers with high Fe utilization and fast adsorption kinetics

Although Fe-based biochar adsorbents are attractive for removing arsenic from water due to their advantages of costing little and being producible at a large scale, the practical applications of these granular adsorbents are mainly limited by low Fe utilization and slow adsorption kinetics. In this study, iron oxide nanoneedle array-decorated biochar fibers (Fe-NN/BFs) adsorbents have been prepared through a simple hydrothermal reaction. The vertical growth of iron oxide nanoneedle arrays on the surface of biochar fibers maximizes Fe utilization and shortens As diffusion distance, thereby increasing As removal kinetics and capacity. Batch experiments show that the adsorption capacities of Fe-NN/BFs for As(V) and As(III) reach to 93.94 and 70.22 mg/g-Fe at pH 7.0, respectively. As(V) levels (275 μg/L) in groundwater are rapidly reduced (less than 5 min) to below 10 μg/L using Fe-NN/BFs (1 g/L) at pH 6.7. Similar As(III) levels can be reduced to below 10 μg/L within 30 min by Fe-NN/BFs (1.5 g/L). In fixed-bed experiments, the treatment volumes of As(V) and As(III) spiked groundwater reach to 2900 BV (26.2 L) and 2500 BV (22.6 L), respectively, using two columns packed with Fe-NN/BFs in tandem (C₀ = 275 μg/L, 2 g of adsorbents in each column). When the As concentration in the influent is reduced to 50 μg/L (As(V): 25 μg/L + As(III): 25 μg/L), the treatment volume using one column reaches up to 11000 BV. The Fe-NN/BFs packed column can be easily regenerated and reused many times. After four regenerations, the treatment volume of As(V) and As(III) were reduced by 10.4% and 22.8%, respectively.

Simultaneous arsenic and fluoride removal using {201}TiO2-ZrO2: Fabrication, characterization, and mechanism

The coexistence of arsenic (As) and fluoride (F) in drinking water is an urgent environmental issue that causes increasing public concerns. The need for effective simultaneous removal of As and F has motived great research efforts. Herein, a novel {201}TiO₂-ZrO₂ composite was synthesized and its application mechanism was explored. Batch adsorption experiments show that the As(III), As(V), and F adsorption followed the pseudo-second-order kinetics with the Langmuir adsorption capacity at 58.5, 21.6, and 13.1 mg/g, respectively. EXAFS and in situ ATR-FTIR results suggested that TiO₂ surface sites were occupied by As(III) and As(V) in bidentate binuclear structures, and ZrO₂ sites preferentially adsorbed As(III) and F in monodentate mononuclear configurations. This molecular structure obtained in the mono-adsorption system was integrated with the charge distribution multisite surface complexation model to accurately predict the As and F co-existing adsorption behaviors. The results in competitive adsorption, regeneration, and application evidenced that the {201}TiO₂-ZrO₂ composite is a promising adsorbent for simultaneous As and F removal.

Lattice-Defect-Enhanced Adsorption of Arsenic on Zirconia Nanospheres: A Combined Experimental and Theoretical Study

Zirconium oxide (ZrO₂) nanoadsorbents exhibit great potential in the remediation of arsenic-polluted water. However, physicochemical structure-adsorption performance relationship is not well-understood, which retards further development of high-performance ZrO₂ nanoadsorbents. Herein, a facile-controlled crystallization strategy was developed to synthesize defective ZrO₂ with the assistance of organic ligands. Systematic characterizations showed that this proposed synthesis strategy can be exploited to regulate the defective density of ZrO₂, whereas other structural properties remain almost unchanged. Batch adsorption experiments exhibited that UiO-66-SH-A with a higher lattice defect possessed a larger capacity and a faster rate for the uptake of As(III)/As(V). The maximum capacities of UiO-66-SH-A to uptake As(III) and As(V) were up to 90.7 and 98.8 mg/g, respectively, which are 12.3 and 11.5 times larger than those of UiO-66-A. These results from the structure-performance analysis and theoretical calculations further reveal that lattice defect plays a key role in the enhancement of arsenic adsorption on ZrO₂. We hope this new understanding of the structure-dependent adsorption performance will provide a valuable insight for designing Zr-based nanoadsorbents to capture arsenic.

Mesoporous zirconia nanostructures (MZN) for adsorption of As(III) and As(V) from aqueous solutions

Mesoporous zirconia nanostructures (MZN) were synthesized by hydrothermal method to efficiently remove highly mobile and toxic arsenite (As(III)) and arsenate (As(V)) from aqueous solutions. The as-synthesized MZN were characterized by Brunauer-Emmett-Teller (BET), X-Ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscope (HRTEM), and Energy-dispersive X-ray spectroscopy (EDX) techniques. The batch adsorption experimental results showed that the As(III) and As(V) removal capacities of the MZN were 105.03 and 110.29 mg/g, respectively, under neutral pH conditions, which were better than many recently reported adsorbents. The adsorption behavior of As(III) and As(V) on the MZN could be well described by pseudo-second-order and Langmuir isotherms models. Moreover, As(III) and As(V) adsorption on the MZN was spontaneous and endothermic. Some of the common co-existing ions had slightly affected the arsenic removal proficiency of MZN. Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) were used to investigate the adsorption mechanism of As(III) and As(V) on the as-synthesized MZN. The as-synthesized MZN demonstrated quite fast and good treatment of simulated real arsenic (As(III,V)) contaminated water. This study suggested that the as-synthesized MZN are potential candidate for practical applications of As(III) and As(V) removal from the aqueous solutions.

Fabrication, characterization and adsorption properties of cucurbit[7]uril-functionalized polycaprolactone electrospun nanofibrous membranes

The fabrication of electrospun nanofibers comprising cucurbit[7]uril (CB[7]) and poly(ε-caprolactone) (PCL) is reported. Various techniques such as SEM, FTIR, XRD, DSC and TG were utilized to characterize the morphology, composition and properties of the nanofibers. Uniform bead-free electrospun nanofibers were obtained from PCL/CB[7] mixed solutions and the average fiber diameter of the nanofibers increases with the increase of CB[7] content. The nanofibers are composed of a physical mixture of PCL and CB[7], and CB[7] itself is present in the PCL fiber matrix in an uncomplexed state. The static adsorption behavior of the PCL/CB[7] nanofibers towards methylene blue (MB) was also preliminary investigated. The results indicate that the adsorption of MB onto the nanofibrous membranes fits the second-order kinetic model and Langmuir isotherm model.

Dye removal by eco-friendly physically cross-linked double network polymer hydrogel beads and their functionalized composites

Hydrogels have attracted large attention in wastewater treatment fields due to their low-cost and good interaction with pollutants, among which novel double network hydrogel is an outstanding class. To expand the application of double network hydrogel in water treatment, in this study, eco-friendly physically cross-linked double network polymer hydrogel beads (DAP) are prepared and studied in depth on the mechanism of Methylene Blue (MB) adsorption; and then the polymer hydrogels are further functionalized by inorganic materials. MB adsorption on DAP favors alkaline condition which is due to the increase of electrostatic attraction and adsorption site, and it reaches equilibrium within 10 hr, which is faster than that of the single network hydrogel beads (SAP). Through thermodynamics study, the process shows to be an exothermic and spontaneous process. The adsorption isotherms are well fitted by Langmuir model, with a maximum monolayer adsorption capacity of 1437.48 mg/g, which is larger than SAP (1255.75 mg/g). After being functionalized with common inorganic materials including activated carbon, Fe₃O₄ and graphene oxide (GO), the composites show to have larger pore sizes and have obvious increases in adsorption capacity especially the one contains GO. Then the composites contains Fe₃O₄ are used as heterogeneous Fenton catalyst which shows to have excellent performance in MB degradation. The results indicate the potential of polymer double network to be functionalized in environmental areas.

Synthesis of modulator-driven highly stable zirconium-fumarate frameworks and mechanistic investigations of their arsenite and arsenate adsorption from aqueous solutions

Benzoic acid-driven highly stable zirconium-fumarate frameworks showed high adsorption efficiencies toward arsenite and arsenate from aqueous solutions.

Synthesis of ultra-large ZrO2 nanosheets as novel adsorbents for fast and efficient removal of As(III) from aqueous solutions

Consumption of water having excessive arsenic (As) contamination can cause adverse health effects on human beings. In this study, novel ultra-large zirconium oxide (ZrO₂) nanosheets were successfully synthesized using graphene oxide (GO) templates and their adsorption-ability was studied for arsenite (As(III)). Owing to higher values of surface area, numbers of available hydroxyl groups and strong chemisorption binding affinity towards As(III), the synthesized novel ultra-large ZrO₂ nanosheets showed high adsorption-ability for As(III) over a wide pH range. Experimental results demonstrated that the maximum adsorption-ability of the ZrO₂ nanosheets for As(III) reached to 74.9 mg/g at pH 6. BET, zeta potential, effect of initial pH, FTIR and XPS have been used to analyze the As(III) adsorption process on the ZrO₂ nanosheets. The experiments for effects of co-existing ions indicated that ZrO₂ nanosheets possessed good anti-interference ability towards co-existing ions. Furthermore, the ZrO₂ nanosheets demonstrated very fast and excellent treatment of simulated real As(III) polluted water, consequently the effluent concentration met the standard regulated by World Health Organization. This study suggested that the as-prepared ZrO₂ nanosheets could be potentially applied in practical drinking water treatment.

Identification of Fe and Zr oxide phases in an iron-zirconium binary oxide and arsenate complexes adsorbed onto their surfaces

The Fe-Zr binary oxide adsorbents have higher arsenic adsorptive capacities than either iron oxide or zirconium oxide alone, indicating a strong synergistic effect exists between Fe and Zr oxides. However, no generally accepted in-depth explanations have been reached on the origin of this better performance. In the present study, the component phases, the active surface sites, the structure of the adsorbed As(V) surface species, and the mechanism of the synergistic effect, were investigated and elucidated using multiple advanced experimental techniques combined with quantum chemical calculations. Goethite and lepidocrocite were identified as the main Fe oxide components while amorphous zirconium hydroxide was the main Zr oxide component, respectively. A monodentate-mononuclear complex and a bidentate-binuclear complex were revealed to be dominant on the surface, respectively, when at lower and higher initial As(V) concentrations. Density functional theory calculations indicated that As(V) preferred to bind with Zr-OH rather than Fe-OH. This was verified with the As K-edge EXAFS results and XPS observations. The synergistic effect was due to a short-range ordering state, the enlarged contents of amorphous and poorly-crystalline fractions, and increased hydroxyl surface site density. These results lead to the realization that the above properties are preferred in future adsorbent preparations.

As(V) removal capacity of FeCu bimetallic nanoparticles in aqueous solutions: The influence of Cu content and morphologic changes in bimetallic nanoparticles

In this study, bimetallic nanoparticles (BMNPs) with different mass ratios of Cu and Fe were evaluated. The influence of the morphology on the removal of pollutants was explored through theoretical and experimental studies, which revealed the best structure for removing arsenate (As(V)) in aqueous systems. To evidence the surface characteristics and differences among BMNPs with different mass proportions of Fe and Cu, several characterization techniques were used. Microscopy techniques and molecular dynamics simulations were applied to determine the differences in morphology and structure. In addition, X-ray diffraction (XRD) was used to determine the presence of various oxides. Finally, the magnetization response was evaluated, revealing differences among the materials. Our cumulative data show that BMNPs with low amounts of Cu (Fe_0.9Cu_0.1) had a non-uniform core-shell structure with agglomerate-type chains of magnetite, whereas a Janus-like structure was observed in BMNPs with high amounts of Cu (Fe_0.5Cu_0.5). However, a non-uniform core-shell structure (Fe_0.9Cu_0.1) facilitated electron transfer among Fe, Cu and As, which increased the adsorption rate (k), capacity (q_e) and intensity (n). The mechanism of As removal was also explored in a comparative study of the phase and morphology of BMNPs pre- and post-sorption.

Fe–Zr–O catalyzed base-free aerobic oxidation of 5-HMF to 2,5-FDCA as a bio-based polyester monomer

An environment-friendly and economical route for 5-hydroxymethylfurfural (HMF) aerobic oxidation to 2,5-furandicarboxylic acid (FDCA) in an ionic liquid (IL)-promoted base-free reaction system was reported using Fe–Zr–O as a catalyst.

Porous Nanobimetallic Fe-Mn Cubes with High Valent Mn and Highly Efficient Removal of Arsenic(III)

Iron (Fe) oxides are the most commonly used adsorbent materials for the aqueous removal of Arsenic (As), but they have deficiencies, including low uptake and poor removal of the relatively higher toxicity As(III). Introduction of transition metals into Fe-containing adsorbents, an inexpensive method of altering Fe chemical states, is likewise of interest for removing As(III) from water by means of adsorption. Porous cubic Fe-Mn structures with BET surface area of 450 m² g^-1 were herein prepared via chemical etching of Mn-substituted Prussian Blue analogues (PBAs). Cyclic voltammetry showed a "protective" role of polyvinylpyrrolidone (PVP) during the preparation process, so that Mn with high valence state was readily preserved in this binuclear corner-sharing structure. The calculated reaction Gibbs free energy, which was the most negative of the studied adsorbents, indicated that the adsorption was promoted in the presence of high valence Mn. The structures were capable of directly capturing As(III) oxyanions to below the acceptable limits in drinking water standards, and the saturation uptake capacity of 460 mg g^-1 was substantially higher than comparable materials under consideration. The work therefore presents a new benchmark for As-adsorbent materials and demonstrates the promise of the porous Fe-Mn structure for rapid removal of other metal ions from contaminated water for environmental remediation.