Anti-staphylococcal Activity of Injectable Nano Tigecycline/Chitosan-PRP Composite Hydrogel Using Drosophila melanogaster Model for Infectious Wounds

Chitosan-based injectable hydrogel with multifunction for wound healing: A critical review

Different types of clinical wounds are difficult to treat while infected by bacteria. Wound repair involves multiple cellular and molecular interactions, which is a complicated process. However, wound repair often suffers from abnormal cellular functions or pathways that result in unavoidable side effects, so there is an urgent need for a material that can heal wounds quickly and with few side effects. Based on these needs, hydrogels with injectable properties have been confirmed to be able to undergo self-healing, which provides favorable conditions for wound healing. Notably, as a biopolymer with excellent easy-to-modify properties from a wide range of natural sources, chitosan can be used to prepare injectable hydrogel with multifunction for wound healing because of its outstanding flowability and injectability. Especially, chitosan-based hydrogels with marked biocompatibility, non-toxicity, and bio-adhesion properties are ideal for facilitating wound healing. In this review, the characteristics and healing mechanisms of different wounds are briefly summarized. In addition, the preparation and characterization of injectable chitosan hydrogels in recent years are classified. Additionally, the bioactive properties of this type of hydrogel in vitro and in vivo are demonstrated, and future trend in wound healing is prospected.

Injectable, stable, and biodegradable hydrogel with platelet-rich plasma induced by l-serine and sodium alginate for effective treatment of intrauterine adhesions

The combination of pharmacological and physical barrier therapy is a highly promising strategy for treating intrauterine adhesions (IUAs), but there lacks a suitable scaffold that integrates good injectability, proper mechanical stability and degradability, excellent biocompatibility, and non-toxic, non-rejection therapeutic agents. To address this, a novel injectable, degradable hydrogel composed of poly(ethylene glycol) diacrylate (PEGDA), sodium alginate (SA), and l-serine, and loaded with platelet-rich plasma (PRP) (referred to as PSL-PRP) is developed for treating IUAs. l-Serine induces rapid gelation within 1 min and enhances the mechanical properties of the hydrogel, while degradable SA provides the hydrogel with strength, toughness, and appropriate degradation capabilities. As a result, the hydrogel exhibits an excellent scaffold for sustained release of growth factors in PRP and serves as an effective physical barrier. In vivo testing using a rat model of IUAs demonstrates that in situ injection of the PSL-PRP hydrogel significantly reduces fibrosis and promotes endometrial regeneration, ultimately leading to fertility restoration. The combined advantages make the PSL-PRP hydrogel very promising in IUAs therapy and in preventing adhesions in other internal tissue wounds.

Injectable and Thermosensitive Hydrogel with Platelet-Rich Plasma for Enhanced Biotherapy of Skin Wound Healing

The rapid and effective healing of skin wounds resulted from severe injuries and full-layer skin defects remains a pressing clinical challenge in contemporary medical practice. The reduction of wound infection and rapid healing is helpful to rebuild and repair skin tissue. Here, a thermosensitive chitosan-based wound dressing hydrogel incorporating β-glycerophosphate (GP), hydroxy propyl cellulose (HPC), graphene oxide (GO), and platelet-rich plasma (PRP) is developed, which exhibits the dual functions of antibacterial properties and repair promotion. GP and HPC enhance the mechanical properties through forming hydrogen bonding connection, while GO produces local heat under near-infrared light, leading to improved blood circulation and skin recovery. Notably, antibacterial properties against Pseudomonas aeruginosa, and control-release of growth factors from PRP are also achieved based on the system. In vitro experiments reveal its biocompatibility, and ability to promote cell proliferation and migration. Animal experiments demonstrate that the epithelial repair and collagen deposition can be promoted during skin wound healing in Sprague Dawley rats. Moreover, a reduction in wound inflammation levels and the improvement of wound microenvironment are observed, collectively fostering effective wound healing. Therefore, the composite hydrogel system incorporated with GO and PRP can be a promising dressing for the treatment of skin wounds.

Amikacin sulphate loaded chitosan-diopside nanoparticles composite scaffold for infectious wound healing

A wound dressing material should inhibit infections that may occur at the wound site, and at the same time, it should enhance the healing process. In this study, we developed an amikacin sulphate (AK) incorporated chitosan (Ch) and Diopside nanoparticles composite dressing (Ch-nDE-AK) for controlling wound infection and healing. The diopside nanoparticles (nDE) were prepared using sol-gel synthesis and characterized using XRD, FT-IR, and FESEM. nDE shows a size range of 142 ± 31 nm through FESEM analysis. Later, the developed composite dressing was characterized using SEM, EDS, and FT-IR analysis. Ch-nDE-AK dressing possesses a porous nature that will aid in easy cell infiltration and proliferation. The swelling studies indicated the expansion capability of the scaffold when applied to the injured site. Ch-nDE-AK scaffold showed a 69.6 ± 8.2 % amikacin sulphate release up to 7 days, which indicates the sustained release of the drug from Ch-nDE-AK scaffold. The drug release data was subjected to various kinetics models and was observed to follow the Higuchi model. The scaffold showed antibacterial activity against ATCC strains of S. aureus and E. coli for 7 days by in vitro. Ch-nDE-AK scaffold also showed antibacterial activity against S. aureus and E. coli clinical strains in vitro. The ex vivo antibacterial study confirmed the antibacterial ability of Ch-nDE-AK scaffold against S. aureus and E. coli. Ch-nDE-AK scaffold also exhibits anti-biofilm activity against S. aureus and E. coli. The Ch-nDE-AK scaffold showed cytocompatibility and cell attachment to fibroblast cells. Additionally, the scratch assay using fibroblast cells confirmed the role of the nDE in the scaffold, helping in cell migration. Thus, the developed Ch-nDE-AK dressing can potentially be used to treat infectious wound healing.

Multifunctional Hydrogels for the Healing of Diabetic Wounds

The healing of diabetic wounds is hindered by various factors, including bacterial infection, macrophage dysfunction, excess proinflammatory cytokines, high levels of reactive oxygen species, and sustained hypoxia. These factors collectively impede cellular behaviors and the healing process. Consequently, this review presents intelligent hydrogels equipped with multifunctional capacities, which enable them to dynamically respond to the microenvironment and accelerate wound healing in various ways, including stimuli -responsiveness, injectable self-healing, shape -memory, and conductive and real-time monitoring properties. The relationship between the multiple functions and wound healing is also discussed. Based on the microenvironment of diabetic wounds, antibacterial, anti-inflammatory, immunomodulatory, antioxidant, and pro-angiogenic strategies are combined with multifunctional hydrogels. The application of multifunctional hydrogels in the repair of diabetic wounds is systematically discussed, aiming to provide guidelines for fabricating hydrogels for diabetic wound healing and exploring the role of intelligent hydrogels in the therapeutic processes.

Fabrication of versatile poly(xylitol sebacate)-co-poly(ethylene glycol) hydrogels through multifunctional crosslinkers and dynamic bonds for wound healing

Poly(polyol sebacate) (PPS) polymer family has been recognized as promising biomaterials for biomedical applications with their characteristics of easy production, elasticity, biodegradation, and cytocompatibility. Poly(xylitol sebacate)-co-poly(ethylene glycol) (PXS-co-PEG) has been developed to fabricate PPS-based hydrogels; however, current PXS-co-PEG hydrogels presented limited properties and functions due to the limitations of the crosslinkers and crosslinking chemistry used in the hydrogel formation. Here, we fabricate a new type of PXS-co-PEG hydrogels through the use of multifunctional crosslinkers as well as dynamic bonds. In our design, polyethyleneimine-polydopamine (PEI-PDA) macromers are utilized to crosslink aldehyde-functionalized PXS-co-PEG (APP) through imine bonds and hydrogen bonds. PEI-PDA/APP hydrogels present multiple functional properties (e.g., fluorescent, elastomeric, biodegradable, self-healing, bioadhesive, antioxidant, and antibacterial behaviors). These properties of PEI-PDA/APP hydrogels can be fine-tuned by changing the PDA grafting degrees in the PEI-PDA crosslinkers. Most importantly, PEI-PDA/APP hydrogels are considered promising wound dressings to promote tissue remodeling and prevent bacterial infection in vivo. Taken together, PEI-PDA/APP hydrogels have been demonstrated as versatile biomaterials to provide multiple tailorable properties and desirable functions to expand the utility of PPS-based hydrogels for advanced biomedical applications. STATEMENT OF SIGNIFICANCE: Various strategies have been developed to fabricate poly(polyol sebacate) (PPS)-based hydrogels. However, current PPS-based hydrogels present limited properties and functions due to the limitations of the crosslinkers and crosslinking chemistry used in the hydrogel formation. This work describes that co-engineering crosslinkers and interfacial crosslinking is a promising approach to synthesizing a new type of poly(xylitol sebacate)-co-poly(ethylene glycol) (PXS-co-PEG) hydrogels as multifunctional hydrogels to expand the utility of PPS-based hydrogels for advanced biomedical applications. The fabricated hydrogels present multiple functional properties (e.g., fluorescent, biodegradable, elastomeric, self-healing, bioadhesive, antioxidative, and antibacterial), and these properties can be fine-tuned by the defined crosslinkers. The fabricated hydrogels are also used as promising wound dressing biomaterials to exhibit promoted tissue remodeling and prevent bacterial infection in vivo.

Therapeutic and pro-healing potential of advanced wound dressings loaded with bioactive agents

Chronic skin wound infections are inextricably linked with high mortality rates. With the rise in the aging population and the threat of diabetes, obesity and lifestyle-based diseases, the risk incurred from invasive wound pathogens has been ever escalating. Thus, more efficacious wound care management is necessary to cope with such morbid illnesses. A plethora of bioactive agents, such as antibiotics, phytochemicals, essential oils, phages among others, has been exploited to develop wound dressings, raising tremendous interest in their prospective use as wound care products. The present review critically focuses on the therapeutic implications of advanced wound dressings that have assisted in the expansion of regenerative medicine and also discusses the practical concerns that have limited their bench-to-market entry.

Polysaccharide-based hydrogels for drug delivery and wound management: a review

INTRODUCTION

Polysaccharide-based hydrogels (PBHs) offer several advantages over their synthetic counterparts. Their natural origin contributes to their nontoxicity, high biocompatibility, and in vivo biodegradability. Their properties can be tuned finely to obtain hydrogels with desired mechanical, structural, and chemical properties.

AREAS COVERED

Such versatile characteristics have potentiated the use of PBHs for the delivery of drugs, vaccines, protein and peptide therapeutics, genes, cells, probiotics, bacteriophages, and other therapeutic agents. Recent advances in hydrogel-based formulations such as nanogels, microgels, microneedles, hydrogel beads, nanocarrier-loaded hydrogels, and complexation hydrogels have enabled the precise delivery of a wide range of therapeutics. This review aims to give a holistic overview of hydrogels in the delivery of a variety of therapeutics through different routes.

EXPERT OPINION

PBHs have been used to enable the oral delivery of vaccines and other biologicals, thereby allowing self-administration of life-saving vaccines during public health emergencies. There is a lack of commercialized wound dressings for the treatment of chronic wounds. PBH-based wound dressings, especially those based on chitosan and loaded with actives and growth factors, have the potential to help in the long-term treatment of such wounds. Recent developments in the 3D printing of hydrogels can enable the quick and large-scale production of drug-loaded hydrogels.

Self-Healing Hyaluronic Acid Nanocomposite Hydrogels with Platelet-Rich Plasma Impregnated for Skin Regeneration

The development of natural hydrogels with sufficient strength and self-healing capacity to accelerate skin wound healing is still challenging. Herein, a hyaluronic acid nanocomposite hydrogel was developed based on aldehyde-modified sodium hyaluronate (AHA), hydrazide-modified sodium hyaluronate (ADA), and aldehyde-modified cellulose nanocrystals (oxi-CNC). This hydrogel was formed in situ using dynamic acylhydrazone bonds via a double-barreled syringe. This hydrogel exhibited improved strength and excellent self-healing ability. Furthermore, platelet-rich plasma (PRP) can be loaded in the hyaluronic acid nanocomposite hydrogels (ADAC) via imine bonds formed between amino groups on PRP (e.g., fibrinogen) and aldehyde groups on AHA or oxi-CNC to promote skin wound healing synergistically. As expected, ADAC hydrogel could protect and release PRP sustainably. In animal experiments, ADAC@PRP hydrogel significantly promoted full-thickness skin wound healing through enhancing the formation of granulation tissue, facilitating collagen deposition, and accelerating re-epithelialization and neovascularization. This self-healing nanocomposite hydrogel with PRP loading appears to be a promising candidate for wound therapy.

Emerging Delivery Strategies of Platelet-Rich Plasma with Hydrogels for Wound Healing

Platelet-rich plasma (PRP), a platelet-rich plasma concentrate obtained from whole blood, has been widely used to treat wounds due to its high contents of growth factors that can not only play a role in the hemostasis, repair, and anti-infection of wounds but also promote cell proliferation, maturation, and angiogenesis. However, after PRP activation, its clinical effect was limited because of burst and uncontrolled release of growth factors and poor mechanical properties of PRP gels. In recent years, increasing attention has been moved to the loading and sustained release of growth factors in PRP by polymeric carriers. Hydrogels, as an interesting carrier, enable controlled delivery of growth factors by structural designs. Moreover, using hydrogels to encapsulate PRP is favorable to controlling the mechanical properties and water maintenance of PRP gels, which can provide a stable and moist wound repair environment to promote coordinated operations of skin tissue cells and cytokines as well as wound healing. In this review, the state of the art of hydrogels that have been used to load PRP for wound treatments is introduced, and further prospects in the research area are proposed.

Bacterial Toxin-Triggered Release of Antibiotics from Capsosomes Protects a Fly Model from Lethal Methicillin-Resistant Staphylococcus aureus (MRSA) Infection

Antibiotic resistance is a severe global health threat and hence demands rapid action to develop novel therapies, including microscale drug delivery systems. Herein, a hierarchical microparticle system is developed to achieve bacteria-activated single- and dual-antibiotic drug delivery for preventing methicillin-resistant Staphylococcus aureus (MRSA) bacterial infections. The designed system is based on a capsosome structure, which consists of a mesoporous silica microparticle coated in alternating layers of oppositely charged polymers and antibiotic-loaded liposomes. The capsosomes are engineered and shown to release their drug payloads in the presence of MRSA toxins controlled by the Agr quorum sensing system. MRSA-activated single drug delivery of vancomycin and synergistic dual delivery of vancomycin together with an antibacterial peptide successfully kills MRSA in vitro. The capability of capsosomes to selectively deliver their cargo in the presence of bacteria, producing a bactericidal effect to protect the host organism, is confirmed in vivo using a Drosophila melanogaster MRSA infection model. Thus, the capsosomes serve as a versatile multidrug, subcompartmentalized microparticle system for preventing antibiotic-resistant bacterial infections, with potential applications to protect wounds or medical device implants from infections.

Chitosan-based biomaterials for the treatment of bone disorders

Bone is an alive and dynamic organ that is well-differentiated and originated from mesenchymal tissues. Bone undergoes continuous remodeling during the lifetime of an individual. Although knowledge regarding bones and their disorders has been constantly growing, much attention has been devoted to effective treatments that can be used, both from materials and medical performance points of view. Polymers derived from natural sources, for example polysaccharides, are generally biocompatible and are therefore considered excellent candidates for various biomedical applications. This review outlines the development of chitosan-based biomaterials for the treatment of bone disorders including bone fracture, osteoporosis, osteoarthritis, arthritis rheumatoid, and osteosarcoma. Different examples of chitosan-based formulations in the form of gels, micro/nanoparticles, and films are discussed herein. The work also reviews recent patents and important developments related to the use of chitosan in the treatment of bone disorders. Although most of the cited research was accomplished before reaching the clinical application level, this manuscript summarizes the latest achievements within chitosan-based biomaterials used for the treatment of bone disorders and provides perspectives for future scientific activities.

Preparation of norfloxacin-grafted chitosan antimicrobial sponge and its application in wound repair

Trauma is one of the most common health issues in humans, and bacterial infection of the wound may result in many complications. In this paper, using 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC) as a coupling agent, chitosan (CS) was grafted with norfloxacin (NF), an antibacterial agent, to prepare a CS-NF sponge by freezing-induced phase separation. The CS-NF sponge was characterized by ultra violet-visible spectroscopy, Fourier transform infrared spectroscopy, and scanning electron microscopy. Its porosity and water absorption ratio were determined, the antimicrobial activity was evaluated by inhibition zone assay, and its wound repair effect was investigated in a full-thickness cutaneous excisional wound animal model. The results showed that NF was successfully grafted onto CS, and the obtained CS-NF sponge had both a high porosity and water absorption ratio. The CS-NF sponge displayed significant antimicrobial activities in the inhibition zone assay. In vivo the CS-NF sponge exhibited a strong wound healing effect, with a wound healing rate close to 100% by day 15. Therefore, the CS-NF sponge is a novel promising wound-healing dressing for clinical practice.

Preparation and Characterization of Plasma-Derived Fibrin Hydrogels Modified by Alginate di-Aldehyde

Fibrin hydrogels are one of the most popular scaffolds used in tissue engineering due to their excellent biological properties. Special attention should be paid to the use of human plasma-derived fibrin hydrogels as a 3D scaffold in the production of autologous skin grafts, skeletal muscle regeneration and bone tissue repair. However, mechanical weakness and rapid degradation, which causes plasma-derived fibrin matrices to shrink significantly, prompted us to improve their stability. In our study, plasma-derived fibrin was chemically bonded to oxidized alginate (alginate di-aldehyde, ADA) at 10%, 20%, 50% and 80% oxidation, by Schiff base formation, to produce natural hydrogels for tissue engineering applications. First, gelling time studies showed that the degree of ADA oxidation inhibits fibrin polymerization, which we associate with fiber increment and decreased fiber density; moreover, the storage modulus increased when increasing the final volume of CaCl₂ (1% w/v) from 80 µL to 200 µL per milliliter of hydrogel. The contraction was similar in matrices with and without human primary fibroblasts (hFBs). In addition, proliferation studies with encapsulated hFBs showed an increment in cell viability in hydrogels with ADA at 10% oxidation at days 1 and 3 with 80 µL of CaCl₂; by increasing this compound (CaCl₂), the proliferation does not significantly increase until day 7. In the presence of 10% alginate oxidation, the proliferation results are similar to the control, in contrast to the sample with 20% oxidation whose proliferation decreases. Finally, the viability studies showed that the hFB morphology was maintained regardless of the degree of oxidation used; however, the quantity of CaCl₂ influences the spread of the hFBs.

A Tasquinomod-loaded dopamine-modified pH sensitive hydrogel is effective at inhibiting the proliferation of KRAS mutant lung cancer cells

Hydrogels can maintain a high local drug concentration during treatments and may be useful to local targeting diseased areas. We propose a pH sensitive hydrogel consisting of poly-vinylpyrrolidone (PVP) and chitosan as a new treatment method for KRAS mutant lung cancer. Addition of dopamine improved the drug loading and release effects of this hydrogel. We demonstrate that Tasquinimod-loading of this dopamine-modified pH sensitive hydrogel is more effective than Tasquinimod alone for inhibiting the proliferation of KRAS mutant lung cancer cells. Combination of conventional drugs with hydrogels may thus provide a new treatment modality for lung cancer.

Study on the Effect and Mechanism of Antibacterial Adhesive Hydrogel on Wound Healing

Bleeding and infection can cause significant increases in mortalities. Hydrogel sealants have attracted extensive attention for their ability to control bleeding. In this study, the adjuvant treatment with antibacterial adhesive hydrogel dressings was applied to patients with deep second-degree burns/scalds. The traditional medical dressing was regarded as control adjuvant treatment. The results indicated that the total positive rate of bacteria in wound secretions and the pain during dressing change in patients who used antibacterial adhesive hydrogel dressings were significantly reduced. The number of fibroblasts and new capillaries in the granulation tissue of the wound increased, and the patient's wound healing is accelerated. The overall clinical effectiveness has been significantly improved. It is proven that the antibacterial adhesive hydrogel dressing has a significant effect on wound healing.

Injectable nanocomposite hydrogels as an emerging platform for biomedical applications: A review

Hydrogels have attracted much attention for biomedical and pharmaceutical applications due to the similarity of their biomimetic structure to the extracellular matrix of natural living tissues, tunable soft porous microarchitecture, superb biomechanical properties, proper biocompatibility, etc. Injectable hydrogels are an exciting type of hydrogels that can be easily injected into the target sites using needles or catheters in a minimally invasive manner. The more comfortable use, less pain, faster recovery period, lower costs, and fewer side effects make injectable hydrogels more attractive to both patients and clinicians in comparison to non-injectable hydrogels. However, it is difficult to achieve an ideal injectable hydrogel using just a single material (i.e., polymer). This challenge can be overcome by incorporating nanofillers into the polymeric matrix to engineer injectable nanocomposite hydrogels with combined or synergistic properties gained from the constituents. This work aims to critically review injectable nanocomposite hydrogels, their preparation methods, properties, functionalities, and versatile biomedical and pharmaceutical applications such as tissue engineering, drug delivery, and cancer labeling and therapy. The most common natural and synthetic polymers as matrices together with the most popular nanomaterials as reinforcements, including nanoceramics, carbon-based nanostructures, metallic nanomaterials, and various nanosized polymeric materials, are highlighted in this review.

Antiseptic chitosan bandage for preventing topical skin infections

Infections on the wound surface are the major problem in restricting the healing process. To reduce the transmission and treat the infection, we have developed 0.05% and 0.1% octenidine dihydrochloride (Ocd) incorporated chitosan (Cs) based flexible bandages. Ocd is extensively used skin antiseptic for its mode of action over a broad spectrum of antimicrobial activity. The prepared antiseptic Cs-Ocd bandage was characterized using Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM). In addition, swelling, degradation, cytocompability, antibacterial, and anti-biofilm property of the developed bandages were studied. This highly porous nature of Cs-Ocd bandage showed enhanced swelling property, slow degradation profile and controlled release of Ocd. The prepared antiseptic bandage exhibited synergistic effect showing good hemostatic potential with Cs, excellent antimicrobial and anti-biofilm activity with Ocd against Staphylococcus aureus (S. aureus) and Candida auris (C. auris). Thus, the developed Cs-Ocd bandage can be used as potential antiseptic bandage for skin infections.

Systematic literature review evaluating evidence and mechanisms of action for platelet-rich plasma as an antibacterial agent

Platelet rich plasma or PRP is a supraphysiologic concentrate of platelets derived by centrifugation and separation of whole blood components. Along with platelets and plasma, PRP contains various cell types including white blood cells (WBC)/leukocytes, both granulocytes (neutrophils, basophils, eosinophils) and agranulocytes (monocytes, lymphocytes). Researchers and clinicians have explored the application of PRP in wound healing and prevention of surgical wound infections, such as deep sternal wounds. We conducted this systematic literature review to evaluate the preclinical and clinical evidence for the antibacterial effect of PRP and its potential mechanism of action. 526 records were identified for screening. 34 unique articles were identified to be included in this literature review for data summary. Overall, the quality of the clinical trials in this review is low, and collectively qualify as Oxford level C. Based on the available clinical data, there is a clear trend towards safety of autologous PRP and potential efficacy in deep sternal wound management. The preclinical and bench data is very compelling. The application of PRP in treatment of wounds or prevention of infection with PRP is promising but there is a need for foundational bench and preclinical animal research to optimize PRP as an antibacterial agent, and to provide data to aid in the design and conduct of well-designed RCTs with adequate power to confirm antimicrobial efficacy of PRP in specific disease states and wound types.

Advancements in release-active antimicrobial biomaterials: A journey from release to relief

Escalating medical expenses due to infectious diseases are causing huge socioeconomic pressure on mankind globally. The emergence of antibiotic resistance has further aggravated this problem. Drug-resistant pathogens are also capable of forming thick biofilms on biotic and abiotic surfaces to thrive in a harsh environment. To address these clinical problems, various strategies including antibacterial agent delivering matrices and bactericidal coatings strategies have been developed. In this review, we have discussed various types of polymeric vehicles such as hydrogels, sponges/cryogels, microgels, nanogels, and meshes, which are commonly used to deliver antibiotics, metal nanoparticles, and biocides. Compositions of these polymeric matrices have been elaborately depicted by elucidating their chemical interactions and potential activity have been discussed. On the other hand, various implant/device-surface coating strategies which exploit the release-active mechanism of bacterial killing are discussed in elaboration. This article is categorized under: Therapeutic Approaches and Drug Discovery > Nanomedicine for Cardiovascular Disease Implantable Materials and Surgical Technologies > Nanomaterials and Implants Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Effect of Fibrin Concentration on the In Vitro Production of Dermo-Epidermal Equivalents

Human plasma-derived bilayered skin substitutes were successfully used by our group to produce human-based in vitro skin models for toxicity, cosmetic, and pharmaceutical testing. However, mechanical weakness, which causes the plasma-derived fibrin matrices to contract significantly, led us to attempt to improve their stability. In this work, we studied whether an increase in fibrin concentration from 1.2 to 2.4 mg/mL (which is the useful fibrinogen concentration range that can be obtained from plasma) improves the matrix and, hence, the performance of the in vitro skin cultures. The results show that this increase in fibrin concentration indeed affected the mechanical properties by doubling the elastic moduli and the maximum load. A structural analysis indicated a decreased porosity for the 2.4 mg/mL hydrogels, which can help explain this mechanical behavior. The contraction was clearly reduced for the 2.4 mg/mL matrices, which also allowed for the growth and proliferation of primary fibroblasts and keratinocytes, although at a somewhat reduced rate compared to the 1.2 mg/mL gels. Finally, both concentrations of fibrin gave rise to organotypic skin cultures with a fully differentiated epidermis, although their lifespans were longer (25–35%) in cultures with more concentrated matrices, which improves their usefulness. These systems will allow the generation of much better in vitro skin models for the testing of drugs, cosmetics and chemicals, or even to “personalized” skin for the diagnosis or determination of the most effective treatment possible.

A call for action to the biomaterial community to tackle antimicrobial resistance

The global surge of antimicrobial resistance (AMR) is a major concern for public health and proving to be a key challenge in modern disease treatment, requiring action plans at all levels. Microorganisms regularly and rapidly acquire resistance to antibiotic treatments and new drugs are continuously required. However, the inherent cost and risk to develop such molecules has resulted in a drying of the pipeline with very few compounds currently in development. Over the last two decades, efforts have been made to tackle the main sources of AMR. Nevertheless, these require the involvement of large governmental bodies, further increasing the complexity of the problem. As a group with a long innovation history, the biomaterials community is perfectly situated to push forward novel antimicrobial technologies to combat AMR. Although this involvement has been felt, it is necessary to ensure that the field offers a united front with special focus in areas that will facilitate the development and implementation of such systems. This paper reviews state of the art biomaterials strategies striving to limit AMR. Promising broad-spectrum antimicrobials and device modifications are showcased through two case studies for different applications, namely topical and implantables, demonstrating the potential for a highly efficacious physical and chemical approach. Finally, a critical review on barriers and limitations of these methods has been developed to provide a list of short and long-term focus areas in order to ensure the full potential of the biomaterials community is directed to helping tackle the AMR pandemic.

A composite hydrogel with co-delivery of antimicrobial peptides and platelet-rich plasma to enhance healing of infected wounds in diabetes

Diabetic wound healing remains a major challenge due to its vulnerability to bacterial infection, as well as the less vascularization and prolonged inflammatory phase. In this study, we developed a hydrogel system for the treatment of chronic infected wounds, which can regulate inflammatory (through the use of antimicrobial peptides) and enhance collagen deposition and angiogenesis (through the addition of platelet-rich plasma (PRP)). Based on the formation of Schiff base linkage, the ODEX/HA-AMP/PRP hydrogel was prepared by mixing oxidized dextran (ODEX), antimicrobial peptide-modified hyaluronic acid (HA-AMP) and PRP under physiological conditions, which exhibited obvious inhibition zones against three pathogenic bacterial strains (E. coli, S. aureus and P. aeruginosa) and slow release ability of antimicrobials and growth factors. Moreover, CCK-8, live/dead fluorescent staining and scratch test confirmed that ODEX/HA-AMP/PRP hydrogel could facilitate the proliferation and migration of L929 fibroblast cells. More importantly, in vivo experiments further demonstrated that the prepared hydrogels could significantly improve wound healing in a diabetic mouse infection by regulating inflammation, accelerating collagen deposition and angiogenesis. In addition, prepared hydrogel showed a significant antibacterial activity against S. aureus and P. aeruginosa, inhibited pro-inflammatory factors (TNF-α, IL-1β and IL-6), enhanced anti-inflammatory factors (TGF-β1) and vascular endothelial growth factor (VEGF) production. The findings of this study suggested that the composite hydrogel with AMP and PRP controlled release ability could be used as a promising candidate for chronic wound healing and infection-related wound healing.

Preparation and evaluation of chitosan-polyvinyl alcohol/polyhexamethylene guanidine hydrochloride antibacterial dressing to accelerate wound healing for infectious skin repair

Background

Wound infections, especially multidrug-resistant (MDR) bacterial infections, are a major challenge in clinical medicine.

Methods

In this study, a new type of antibacterial sponge was prepared from a solution containing a chitosan-polyvinyl alcohol (CTS-PVA) emulsion with added polyhexamethylene guanidine hydrochloride (PHMG) in a homogeneous medium using lyophilization technology. The antibacterial ability of and CTS-PVA/PHMG sponge against Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Candida albicans, Methicillin-resistant Staphylococcus aureus, multidrug-resistant Pseudomonas aeruginosa, and multidrug-resistant Acinetobacter baumannii in vitro. The structure and physical properties were characterized. The sponge dressing was tested in a Pseudomonas aeruginosa-infected full-thickness mouse skin wound defect model. The effects were evaluated by wound area measurement and histological analysis.

Results

The CTS-PVA/PHMG sponge showed broad-spectrum antibacterial ability, including for MDR bacterial stains from clinical sources, while maintaining excellent physicochemical properties, including a high swelling degree and good moisture retention capability. Scanning electron microscopy images displayed the surface morphology of the CTS-PVA/PHMG sponge dressing. The detection of the wound healing rate and histological analysis supported that the new dressing can alleviate the inflammation and accelerate the healing speed of infected wounds and in vivo.

Conclusions

CTS-PVA/PHMG sponge shows broad-spectrum antibacterial activity, which can provide a new pathway for clinical prevention and treatment of superbug-infected wounds.

Rational design and latest advances of polysaccharide-based hydrogels for wound healing

Acute and chronic wounds cause severe physical trauma to patients and also bring an immense socio-economic burden. Hydrogels are considered to be effective wound dressings. Polysaccharides possessing distinctive properties such as biocompatibility, biodegradability, and nontoxicity are promising candidates to structure hydrogels for wound healing. Polysaccharide-based hydrogels can provide suitable moisture for the wound and act as a shield against bacteria. Adequate mechanical properties, degradability, and therapeutic agent controlled release of polysaccharide-based hydrogels have been already characterized for effective utilization. This review presented several crucial design considerations about hydrogels for wound healing, and the current state of polysaccharide (chitosan, alginate, hyaluronic acid, cellulose, dextran, and starch)-based hydrogels as wound dressings was also summarized. The commonly used crosslinking techniques, including physical, chemical, and enzymatic crosslinking, are discussed in detail. Finally, we outline the challenges and perspectives about the improvement of polysaccharide-based hydrogels.

Hydrogel Dressings for the Treatment of Burn Wounds: An Up-To-Date Overview

Globally, the fourth most prevalent devastating form of trauma are burn injuries. Ideal burn wound dressings are fundamental to facilitate the wound healing process and decrease pain in lower time intervals. Conventional dry dressing treatments, such as those using absorbent gauze and/or absorbent cotton, possess limited therapeutic effects and require repeated dressing changes, which further aggravate patients' suffering. Contrariwise, hydrogels represent a promising alternative to improve healing by assuring a moisture balance at the burn site. Most studies consider hydrogels as ideal candidate materials for the synthesis of wound dressings because they exhibit a three-dimensional (3D) structure, which mimics the natural extracellular matrix (ECM) of skin in regard to the high-water amount, which assures a moist environment to the wound. There is a wide variety of polymers that have been used, either alone or blended, for the fabrication of hydrogels designed for biomedical applications focusing on treating burn injuries. The aim of this paper is to provide an up-to-date overview of hydrogels applied in burn wound dressings.

Nanomedicine in Healing Chronic Wounds: Opportunities and Challenges

The poor healing associated with chronic wounds affects millions of people worldwide through high mortality rates and associated costs. Chronic wounds present three main problems: First, the absence of a suitable environment to facilitate cell migration, proliferation, and angiogenesis; second, bacterial infection; and third, unbalanced and prolonged inflammation. Unfortunately, current therapeutic approaches have not been able to overcome these main issues and, therefore, have limited clinical success. Over the past decade, incorporating the unique advantages of nanomedicine into wound healing approaches has yielded promising outcomes. Nanomedicine is capable of stimulating various cellular and molecular mechanisms involved in the wound microenvironment via antibacterial, anti-inflammatory, and angiogenetic effects, potentially reversing the wound microenvironment from nonhealing to healing. This review briefly discusses wound healing mechanisms and pathophysiology and then highlights recent findings regarding the opportunities and challenges of using nanomedicine in chronic wound management.

In situ formation of injectable hydrogels for chronic wound healing

Hydrogels have been widely used in wound healing treatment over the past decade.

Preparation of Antimicrobial Hyaluronic Acid/Quaternized Chitosan Hydrogels for the Promotion of Seawater-Immersion Wound Healing

Wound immersion in seawater with high salt, high sodium, and a high abundance of pathogenic bacteria, especially gram-negative bacteria, can cause serious infections and difficulties in wound repair. The present study aimed to prepare a composite hydrogel composed of hyaluronic acid (HA) and quaternized chitosan (QCS) that may promote wound healing of seawater-immersed wounds and prevent bacterial infection. Based on dynamic Schiff base linkage, hydrogel was prepared by mixing oxidized hyaluronic acid (OHA) and hyaluronic acid-hydrazide (HA-ADH) under physiological conditions. With the addition of quaternized chitosan, oxidized hyaluronic acid/hyaluronic acid-hydrazide/quaternized chitosan (OHA/HA-ADH/O-HACC and OHA/HA-ADH/N-HACC) composite hydrogels with good swelling properties and mechanical properties, appropriate water vapor transmission rates (WVTR), and excellent stability were prepared. The biocompatibility of the hydrogels was demonstrated by in vitro fibroblast L929 cell culture study. The results of in vitro and in vivo studies revealed that the prepared antibacterial hydrogels could largely inhibit bacterial growth. The in vivo study further demonstrated that the antibacterial hydrogels exhibited high repair efficiencies in a seawater-immersed wound defect model. In addition, the antibacterial hydrogels decreased pro-inflammatory factors (TNF-α, IL-1β, and IL-6) but enhanced anti-inflammatory factors (TGF-β1) in wound. This work indicates that the prepared antibacterial composite hydrogels have great potential in chronic wound healing applications, such as severe wound cure and treatment of open trauma infections.

Bioactive Medications for the Delivery of Platelet Derivatives to Skin Wounds

Chronic wounds are the result of alterations in the complex series of events of physiological wound healing. In particular, the prolonged inflammation results in increased protease activity, in the deg-radation of extracellular matrix (ECM) and of growth factors (GFs). The relevance of platelet GFs in maintaining and restoring the complex equilibrium of different moments in wound healing is well recog-nized. Moreover, the observed decrease of their levels in chronic wounds suggested a possible therapeutic role of the external application to the wounds. It has been also pointed out that tissue regeneration can be more efficiently obtained by the synergic use of different GFs. Platelet derivatives such as platelet-rich plasma (PRP) and platelet lysate (PL) are able to release GFs in a balanced pool. Their therapeutic use in regenerative medicine and wound healing has been therefore more and more frequently proposed in clini-cal trials and in the literature. The development of a suitable formulation able to control the GFs release rate, to protect the GFs, and to assure their prolonged contact with the wound site, is of paramount im-portance for the therapeutic success. The present review considers some formulation approaches for PRP and PL application to wounds

Optimization of 3D bioprinting of periodontal ligament cells

Three-dimensional (3D) bioprinting of cells is an emerging area of research but has been not explored yet in the context of periodontal tissue engineering.

OBJECTIVE

This study reports on the optimisation of the 3D bioprinting of periodontal ligament cells for potential application in periodontal regeneration.

METHODS

We systematically investigated the printability of various concentrations of gelatin methacryloyl (GelMA) hydrogel precursor using a microextrusion based three-dimensional (3D) printer. The influence of different printing parameters such as photoinitiator concentration, UV exposure, pressure and dispensing needle diameter on the viability of periodontal ligament cells encapsulated within the 3D bioprinted construct were subsequently assessed.

RESULTS

This systematic evaluation enabled the selection of the most suited printing conditions for achieving high printing resolution, dimensional stability and cell viability for 3D bioprinting of periodontal ligament cells.

SIGNIFICANCE

The optimised bioprinting system is the first step towards to the reproducible manufacturing of cell laden, space maintaining scaffolds for the treatment of periodontal lesions.

Combination of Repurposed Drug Diosmin with Amoxicillin-Clavulanic acid Causes Synergistic Inhibition of Mycobacterial Growth

Effective therapeutic regimens for the treatment of tuberculosis (TB) are limited. They are comprised of multiple drugs that inhibit the essential cellular pathways in Mycobacterium tuberculosis (Mtb). The present study investigates an approach which enables a combination of Amoxicillin-Clavulanic acid (AMC) and a repurposed drug for its synergistic effect towards TB treatment. We identified Diosmin (DIO), by targeting the active site residues of L,D-transpeptidase (Ldt) enzymes involved in Mtb cell wall biosynthesis by using a structure-based drug design method. DIO is rapidly converted into aglycone form Diosmetin (DMT) after oral administration. Binding of DIO or DMT towards Ldt enzymes was studied using molecular docking and bioassay techniques. Combination of DIO (or DMT) and AMC exhibited higher mycobactericidal activity against Mycobacterium marinum as compared to individual drugs. Scanning electron microscopy study of M. marinum treated with AMC-DIO and AMC-DMT showed marked cellular leakage. M. marinum infected Drosophila melanogaster fly model showed an increased fly survival of ~60% upon treatment with a combination of AMC and DIO (or DMT). Finally, the enhanced in vitro antimicrobial activity of AMC-DIO was validated against Mtb H37Ra and a MDR clinical isolate. Our results demonstrate the potential for AMC and DIO (or DMT) as a synergistic combination for the treatment of TB.

Therapeutic strategies for skin regeneration based on biomedical substitutes

Regenerative medicine and tissue engineering (TE) have experienced significant advances in the development of in vitro engineered skin substitutes, either for replacement of lost tissue in skin injuries or for the generation of in vitro human skin models to research. However, currently available skin substitutes present different limitations such as expensive costs, abnormal skin microstructure and engraftment failure. Given these limitations, new technologies, based on advanced therapies and regenerative medicine, have been applied to develop skin substitutes with several pharmaceutical applications that include injectable cell suspensions, cell-spray devices, sheets or 3Dscaffolds for skin tissue regeneration and others. Clinical practice for skin injuries has evolved to incorporate these innovative applications to facilitate wound healing, improve the barrier function of the skin, prevent infections, manage pain and even to ameliorate long-term aesthetic results. In this article, we review current commercially available skin substitutes for clinical use, as well as the latest advances in biomedical and pharmaceutical applications used to design advanced therapies and medical products for wound healing and skin regeneration. We highlight the current progress in clinical trials for wound healing as well as the new technologies that are being developed and hold the potential to generate skin substitutes such as 3D bioprinting-based strategies.

A review on nanosystems as an effective approach against infections of Staphylococcus aureus

Staphylococcus aureus (S. aureus) is an important zoonotic bacteria and hazardous for the health of human beings and livestock globally. The characteristics like biofilm forming, facultative intracellular survival, and growing resistance of S. aureus pose a great challenge to its use in therapy. Nanoparticles are considered as a promising way to overcome the infections’ therapeutic problems caused by S. aureus. In this paper, the present progress and challenges of nanoparticles in the treatment of S. aureus infection are focused on stepwise. First, the survival and infection mechanism of S. aureus are analyzed. Second, the treatment challenges posed by S. aureus are provided, which is followed by the third step including the advantages of nanoparticles in improving the penetration and accumulation ability of their payload antibiotics into cell, inhibiting S. aureus biofilm formation, and enhancing the antibacterial activity against resistant isolates. Finally, the challenges and future perspective of nanoparticles for S. aureus infection therapy are introduced. This review will help the readers to realize that the nanosystems can effectively fight against the S. aureus infection by inhibiting biofilm formation, enhancing intracellular delivery, and improving activity against methicillin-resistant S. aureus and small colony variant phenotypes as well as aim to help researchers looking for more efficient nano-systems to combat the S. aureus infections.

Impregnation of catheters with anacardic acid from cashew nut shell prevents Staphylococcus aureus biofilm development

AIM

The effect of anacardic acid impregnation on catheter surfaces for the prevention of Staphylococcus aureus attachments and biofilm formations were evaluated.

METHODS AND RESULTS

Silicon catheter tubes were impregnated using different concentrations of anacardic acids (0·002-0·25%). Anacardic acids are antibacterial phenolic lipids from cashew nut (Anacardium occidentale) shell oil. Anacardic acid-impregnated silicon catheters revealed no significant haemolytic activity and were cytocompatible against fibroblast cell line (L929). Sustained release of anacardic acids was observed for 4 days. Anacardic acid-impregnated silicon catheters efficiently inhibited S. aureus colonization and the biofilm formation on its surface. The in vivo antibiofilm activity of anacardic acid-impregnated catheters was tested in an intraperitoneal catheter-associated medaka fish infection model. Significant reduction in S. aureus colonization on anacardic acid-impregnated catheter tubes was observed.

CONCLUSIONS

Our data suggest that anacardic acid-impregnated silicon catheters may help in preventing catheter-related staphylococcal infections.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study opens new directions for designing antimicrobial phytochemical-coated surfaces with ideal antibiofilm properties and could be of great interest for biomedical research scientists.