Separation and Sequential Recovery of Tetracycline and Cu(II) from Water Using Reusable Thermoresponsive Chitosan-Based Flocculant

Dendronization of chitosan to afford unprecedent thermoresponsiveness and tunable microconfinement

Convenient chemical modification of biomacromolecules to create novel biocompatible functional materials satisfies the current requirements of sustainable chemistry. Dendronization of chitosan with dendritic oligoethylene glycols (OEGs) paves a strategy for the preparation of functional dendronized chitosans (DCSs) with unprecedent thermoresponsive behavior, which inherit biological features from polysaccharides and the topological features from dendritic OEGs. In addition, densely packed dendritic OEG chains around the backbone provide efficient cooperative interactions and form an intriguing confined microenvironment based on the degradable biopolymers. In this perspective, we describe the principle for the preparation of the thermoresponsive DCSs, and focus on the molecular envelop effect from the hydrophobic microconfinement to the encapsulated guest molecules or moieties. Particular attention is put on their capacity to regulate behavior and the functions of the encapsulated guests through thermally-mediated dehydration and collapse of the densely packed dendritic OEGs. We believe that the methodology described here may provide prospects for the fabrication of functional materials from biomacromolecules, especially when used as environmentally friendly nanomaterials or in accurate diagnosis and therapy.

Elimination of microplastics from the aquatic milieu: A dream to achieve

Microplastics (MPs) have become a significant source of concern as they have emerged as a widespread pollutant that harms the aquatic environment. It has become an enormous challenge, having the capacity to biomagnify and eventually affect human health, biodiversity, aquatic animals, and the environment. This review provides in-depth knowledge of how MPs interact with different toxic organic chemicals, antibiotics, and heavy metals in the aquatic environment and its consequences. Membrane technologies like ultrafiltration (UF), nanofiltration (NF), microfiltration (MF), and dynamic membranes can be highly effective techniques for the removal of MPs. Also, hybrid membrane techniques like advanced oxidation processes (AOPs), membrane fouling, electrochemical processes, and adsorption processes can be incorporated for superior efficiency. The review also focuses on the reactor design and performance of several membrane-based filters and bioreactors to develop practical, feasible, and sustainable membrane technologies. The main aim of this work is to throw light on the alarming scenario of microplastic pollution in the aquatic milieu and strategies that can be adopted to tackle it.

Ab initio molecular dynamics free energy study of enhanced copper (II) dimerization on mineral surfaces

Understanding the adsorption of isolated metal cations from water on to mineral surfaces is critical for toxic waste retention and cleanup in the environment. Heterogeneous nucleation of metal oxyhydroxides and other minerals on material surfaces is key to crystal growth and dissolution. The link connecting these two areas, namely cation dimerization and polymerization, is far less understood. In this work we apply ab initio molecular dynamics calculations to examine the coordination structure of hydroxide-bridged Cu(II) dimers, and the free energy changes associated with Cu(II) dimerization on silica surfaces. The dimer dissociation pathway involves sequential breaking of two Cu²⁺-OH^- bonds, yielding three local minima in the free energy profiles associated with 0-2 OH^- bridges between the metal cations, and requires the design of a (to our knowledge) novel reaction coordinate for the simulations. Cu(II) adsorbed on silica surfaces are found to exhibit stronger tendency towards dimerization than when residing in water. Cluster-plus-implicit-solvent methods yield incorrect trends if OH^- hydration is not correctly depicted. The predicted free energy landscapes are consistent with fast equilibrium times (seconds) among adsorbed structures, and favor Cu²⁺ dimer formation on silica surfaces over monomer adsorption.

Influence of DOM characteristics on the flocculation removal of trace pharmaceuticals in surface water by the successive dosing of alum and moderately hydrophobic chitosan

Hydrophobically-modified chitosan (HC) has emerged as a promising flocculant for trace pharmaceutical removal from surface water. However, the variation in the characteristics of dissolved organic matter (DOM) in different water sources influences the efficacy of HC in removing pharmaceutical compounds. In this work, the flocculation performance of sequentially dosing alum and HC (alum+HC) for the treatment of five water types (three synthetic waters, and samples of two real waters collected from the Yangtze River and the Thames River), having different DOM and five representative pharmaceuticals (initial concentration: 100 ng/L), was assessed by bench-scale jar tests. The DOM characteristics were correlated quantitatively with the removal efficiencies (REs) of the pharmaceuticals. Density functional theory computations were performed to illuminate the interfacial interactions in the flocculation. Alum+HC exhibited a remarkably higher RE of all five pharmaceuticals (maximum RE: 73%-95%) from all waters compared to a conventional coagulant or flocculant (alum or polyacrylamide, respectively). In contrast to using HC alone, alum+HC also achieved a higher RE of pharmaceuticals with nearly half the HC dosage, thereby enhancing the cost-effectiveness of the alum+HC dosing system. Among the different key DOM characteristics, the surface charge and molecular weight of DOM had no evident correlation with RE(pharmaceutical), but the hydrophobic/hydrophilic nature and functional group composition of organic carbon of DOM were strongly correlated: Strongly hydrophobic fractions, with C-C & C=C functional groups (binding pharmaceuticals via hydrophobic association), were beneficial, while hydrophilic fractions with C-OH groups were less effective, for pharmaceutical removal. This work showed the enhanced performance of the alum+HC dosing combination in the removal of different pharmaceutical compounds from different waters, and filled the knowledge gap regarding the performance of hydrophobically-modified flocculants in the treatment of different surface water sources.

Evaluation of renewable pH-responsive starch-based flocculant on treating and recycling of highly saline textile effluents

Herein, we report a novel renewable pH-responsive starch-based flocculant (CIAT-ST) via etherifying 2-chloro-4,6-isopropylamino-[1,3,5]-triazine (CIAT) onto the starch backbones for decontamination and reuse of highly saline effluents. The obtained CIAT-ST shows a unique pH-sensibility and reversibility in response to a subtle pH change due to a pH-controllable surface charge density of polymer chains. The level of residual CIAT-ST in the solution can be facilely monitored by using UV-vis detection. The dye flocculation performance of CIAT-ST was evaluated by using a batch experiment. The results exhibited that the dye removal was highly dependent on the solution pH (optimal pH was 2), the flocculation equilibrium can be achieved within 5 min, and the maximum flocculation capacity of CIAT-ST for K-2BP and KN-B5 were calculated to be 2452.6 ± 23.9 and 792.7 ± 14.1 mg/g, respectively. The multiple flocculation mechanisms, including charge neutralization, bridging and charge patching, may participate in the flocculation process. Adjustment in pH-mediated hydrophilicity-hydrophobicity switch of flocculant facilitates readily recovery and then sequentially reused three times while retaining satisfying flocculation efficiency. A significant contribution was also confirmed that the highly saline effluents after flocculation and sedimentation were reused in three successive dyeing processes without sacrificing fabric quality (ΔE* < 1) due to relatively low polymer residuals, and the efficiency of salt reuse for consecutive regeneration processes could be achieved above 85%. The present work could provide alternative thoughts for the reutilization of spent flocculant and clarified saline wastewater, which is also an efficient and sustainable strategy for textile wastewater management.

Biopolymer-based flocculants: a review of recent technologies

Biopolymer-based flocculants have become a potential substitute for inorganic coagulants and synthetic organic flocculants due to their wide natural reserves, environmental friendliness, easy natural degradation, and high material safety. In recent years, with more and more attention to clean technologies, a lot of researches on the modification and application of biopolymer-based flocculants have been carried out. The present paper reviews the latest important information about the base materials of biopolymer-based flocculants, including chitosan, starch, cellulose, and lignin etc. This review also highlights the various modification methods of these base materials according to reaction types in detail. Via the recent researches, the flocculation mechanisms of biopolymer-based flocculants, such as adsorption, bridging, charge neutralization, net trapping, and sweeping, as well as, some other special mechanisms are comprehensively summarized. This paper also focuses on the water treatment conditions, the removal efficiency, and advantages of biopolymer-based flocculants in applications. Further, this review sheds light on the future perspectives of biopolymer-based flocculants, which may make progress in the sources of base materials, modification processes, multi-function, and deepening application researches. We believe that this review can guide the further researches and developments of biopolymer-based flocculants in the future, to develop them with a higher efficiency, a lower cost, more safety, and multi-function for more diversified applications. Graphical abstract.

Hydrophobic-modified metal-hydroxide nanoflocculants enable one-step removal of multi-contaminants for drinking water production

Flocculation is a mainstream technology for the provision of safe drinking water but is limited due to the ineffectiveness of conventional flocculants in removing trace low-molecular-weight emerging contaminants. We described a synthesis strategy for the development of high-performance nanoflocculants (hydrophobic-organic-chain-modified metal hydroxides [HOC-M]), imitating surfactant-assembling nano-micelles, by integration of long hydrophobic chains with traditional inorganic metal (Fe/Al/Ti)-based flocculants. The core-shell nanostructure was highly stable in acidic stock solution and transformed to meso-scale coagulation nuclei in real surface water. In both jar and continuous-flow tests, HOC-M was superior over conventional flocculants in removing many contaminants (turbidity, UV254, and DOC: >95%; TP and NO3-N: >90%; trace pharmaceuticals [initial concentration: 100 ng/L]: >80%), producing flocs with better structural and dewatering properties, and lowering the environmental risk of metal leaching. The rationally designed nanoflocculants have large application potential, as a solution to increasing public concern about micro-pollutants and increasing water quality requirements.

One-step removal of harmful algal blooms by dual-functional flocculant based on self-branched chitosan integrated with flotation function

Harmful algal blooms induce severe environmental problems. It is challenging to remove algae by the current available treatments involving complicate process and costly instruments. Here, we developed a CaO₂@PEG-loaded water-soluble self-branched chitosan (CP-SBC) system, which can remove algae from water in one-step without additional instrumentation. This approach utilizes a novel flocculant (self-branched chitosan) integrated with flotation function (induced by CaO₂@PEG). CP-SBC exhibited better flocculation performance than commercial flocculants, which is attributed to the enhanced bridging and sweeping effect of branched chitosan. CP-SBC demonstrated outstanding biocompatibility, which was verified by zebrafish test and algae activity test. CaO₂@PEG-loaded self-branched chitosan can serve as an "Air flotation system" to spontaneous float the flocs after flocculation by sustainably released O₂. Furthermore, CP-SBC can improve water quality through minimizing dissolved oxygen depletion and reducing total phosphorus concentrations.

Formation of Single Double-Layered Coacervate of Poly(N,N-diethylacrylamide) in Water by a Laser Tweezer

We demonstrate liquid-liquid phase separation involving both coacervation and coil-to-globule phase transition of a thermoresponsive polymer. By focusing a near-infrared laser beam into an aqueous solution of poly(N-isopropylacrylamide) (PNIPAM), a single phase-separated polymer microdroplet can be formed and stably trapped at the focal point. Such droplet formation is induced by a local elevation in temperature (induced by a photothermal effect) and an optical force. The technique allows us to selectively analyze a single polymer droplet trapped at the focal point. In this study, we applied this technique to poly(N,N-diethylacrylamide) (PDEA) in water and generated a double-layered PDEA droplet. Such an inhomogeneous and complex microstructure has not been previously observed both in steady-state heating of a PDEA solution and in the PNIPAM system. Moreover, we used micro-Raman spectroscopy to clarify that PDEA underwent dehydration due to a coil-to-globule phase transition. Despite this, the polymer concentration (C_poly) of the trapped PDEA droplet was very low and was around 30 wt %. C_poly depended on the molecular weight of PDEA and the laser power that regulates the temperature elevation. These results strongly indicate that PDEA undergoes coacervation in addition to a coil-to-globule phase transition. This study will help provide us with a fundamental understanding of the phase separation mechanisms of thermoresponsive polymers.

Magnetic flocculation of Cu(II) wastewater by chitosan-based magnetic composite flocculants with recyclable properties

In this study, three magnetic flocculants, namely, MC, MC-g-PAM, and MC-g-PAA, were prepared. The structure characteristics, flocculation performance, and floc characteristics of the three magnetic flocculants were systematically studied and compared. SEM, FT-IR, XPS, XRD, TG-DSC, and VSM characterization results show that MC, MC-g-PAM, and MC-g-PAA are successfully prepared and exhibit good magnetic induction. The removal rates of copper ions by MC, MC-g-PAM, and MC-g-PAA under the optimal coagulation conditions are 93.39 %, 88.64 %, and 61.41 %, respectively. Kinetic fitting shows that the flocculation reaction process of MC and MC-g-PAM conforms to pseudo first-order kinetics, while the flocculation reaction process of MC-g-PAA conforms to pseudo second-order kinetics. The flocs produced by MC-g-PAA have larger particle size and fractal dimension than those by MC and MC-g-PAM. At 80 mg/L dosage and pH 6, the floc size and floc fractal dimension obtained by MC-g-PAA reach the maximum values of 48.28 um and 1.468, respectively. Zeta potential studies show that the flocculation functions of the three flocculants are mainly adsorption bridging, adsorption electric neutralization, and chelating precipitation. Recycling experiments show that MC-g-PAA has good recyclability, and the recovery rate after the fifth use is 77.24 % with the Cu(II) removal rate of 67.53 %.

Studies on non-gelatinous & thermo-responsive chitosan with the N-isopropylacrylamide by RAFT methodology for control release of levofloxacin

The non-gelatinous and thermo-responsive properties were introduced in chitosan by incorporating the chain of poly(N-isopropylacrylamide) via reversible addition-fragmentation chain transfer (RAFT) polymerization. To achieve this, the reaction was carried out at 80 °C by modifying the chitosan(CS) with RAFT agent as a macroinitiator (CS-RAFT), where the amine group of CS was protected with phthalic anhydride and then reacted with 4-cyano-4-[(dodecyl sulfanyl thiocarbonyl)sulfanyl]-pentanoic acid (CDSTSP) to form CS-RAFT agent. Further, the addition of NIPAAm chains onto CS-RAFT was carried out in N,N'-dimethylformamide (DMF) solvent by using 2,2'-azobisisobutyronitrile (AIBN) as an initiator in N₂ atmosphere. The controlled addition of NIPAAm chains on to CS was confirmed by ¹H NMR spectroscopy, further, a kinetic study was performed to get the characteristic features of the RAFT reaction. The product was characterized by ¹H NMR, FT-IR, UV-Visible spectroscopy, XRD, SEM, and TGA analyses. The product in aqueous solution showed LCST at 2.0 mg/mL on 33 ± 0.1 °C. Further, beads were prepared with the sodium alginate and loaded the water-soluble levofloxacin drug (60% w/w loading was achieved). The drug delivery process was studied in-vitro at 37 ± 0.1 °C & pH 7.4, which shown controlled release of drug up to 32 h and it was 71% of the loaded levofloxacin.

Role of moderately hydrophobic chitosan flocculants in the removal of trace antibiotics from water and membrane fouling control

In this paper we describe the preparation and testing of a new class of chitosan-based flocculants for the treatment of surface waters containing antibiotic compounds. Three forms of moderately hydrophobic chitosan flocculants (MHCs) were prepared by chemically grafting hydrophobic branches with different lengths onto hydrophilic chitosan and these were evaluated by jar tests and a bench-scale continuous flow ultrafiltration (UF) membrane process with coagulation/sedimentation pre-treatment. Tests were conducted using both synthetic and real surface water in which norfloxacin and tylosin were added as representative antibiotics at an initial concentration of 0.1 μg/L. In jar tests, the MHCs achieved similar high removal efficiencies (REs) of turbidity and UV₂₅₄ absorbance, but much higher REs of the two antibiotics (71.7-84.7% and 68.7-76.6% for synthetic and river waters, respectively), compared to several commercial flocculants; the superior performance was attributed to an enhanced hydrophobic interaction and H-bonding between the flocculants and antibiotics. The presence of suspended kaolin particles and humic acid enhanced the antibiotic removal, speculated to be through MHC bridging of the kaolin/humic acid and antibiotic molecules. In the continuous flow tests involving flocculation/sedimentation-UF for 40 days, an optimal MHC achieved a much greater performance than polyaluminium chloride in terms of the overall removal of antibiotics (RE (norfloxacin) of ∼90% and RE (tylosin) of ∼80%) and a greatly reduced rate of membrane fouling; the latter resulting from a more porous and looser structure of cake layer, caused by a surface-modification-like effect of residual MHC on the hydrophobic PVDF membrane. The results of this study have shown that MHCs offer a significant advance over the use of existing flocculants for the treatment of surface water.

Nitrogen-Free Cationic Starch Flocculants: Flocculation Performance, Antibacterial Ability, and UF Membrane Fouling Control

In light of growing concerns about the formation of nitrogen-based disinfection byproducts (N-DBP) and the possible contribution from the use of quaternary-ammonium-containing flocculants, there is growing interest in the alternative use of quaternary phosphonium salts, which have been reported to have a lower DBP formation potential, stronger cationic properties, lower cytotoxicity, and greater stability. In this study, the performance of N-free quaternary-phosphonium-modified starch flocculants (S-BTP), synthesized through a facile one-step method using commercially available raw materials, in the treatment of bacteria-laden waters (E. coli as the model bacteria) was assessed in both jar tests and a bench-scale continuous-flow flocculation-sedimentation-ultrafiltration process. In jar tests, the effects of the cationic degree of substitution (DS) and dosage of the flocculant, solution pH, and presence of model contaminants on treatment performance were studied. One particular flocculant (S-BTP3), with a DS of 19.3%, displayed high removal efficiencies of E. coli, turbidity, and UV₂₅₄ from water, comparable with those of ammonium-based analogues and conventional alum, via a combination of charge attraction, polymer bridging, and antibacterial effects. S-BTP3 also possessed better bactericidal properties (99.4% of E. coli killed) than alum (41.4% killed) and did not cause the release of intracellular substances into the treated water. In the continuous-flow flocculation-sedimentation-UF tests, S-BTP3 was superior to alum in the flocculation and antibacterial performance, and in mitigating UF membrane fouling. The results have clearly demonstrated the multiple benefits of the use of N-free cationic starch flocculants in water treatment as an alternative to conventional chemicals.

Novel chitosan-based flocculants for chromium and nickle removal in wastewater via integrated chelation and flocculation

Carboxylated chitosan (CPCTS) is used as substrates in the design and synthesis of CPCTS-based flocculants through UV-initiated polymerization techniques. The synthesized flocculants are applied to remove Cr and Ni ions from chromic acid lotion and electroplating wastewater through two-stage flocculation. This study investigates the effect of flocculant dosage, pH, reaction time, and stirring speed on the removal efficiency of Cr and Ni ions. Results indicated that the total Cr removal ratios by CPCTS-graft-polyacrylamide-co-sodium xanthate (CAC) and CPCTS-graft-poly [acrylamide-2-Acrylamido-2-methylpropane sulfonic acid] (CPCTS-g-P(AM-AMPS)) are 94.7% and 94.6%, respectively. The total Ni removal efficiencies by CAC and CPCTS-g-P(AM-AMPS) are 99.3% and 99.4%, respectively. The two-stage flocculation with CPCTS-based flocculants could reduce the total concentrations of Cr and Ni to 1.0 mg/L and 0.5 mg/L, respectively. The relationship of removal capacity and structural properties between the flocculants with different functional groups is established through Fourier transform infrared spectroscopy, nuclear magnetic resonance, scanning electron microscopy, and X-ray diffraction. The micro-interfacial behavior between the colloidal particles and the solution during the integrated chelation-flocculation are elucidated. Thus, CPCTS-based flocculants could be a potential material for the removal of high amounts of Cr and Ni ions in industrial wastewater.

Plasma-induced synthesis of chitosan-g-polyacrylamide and its flocculation performance for algae removal

Chitosan (CS)-g-polyacrylamide (PAM) is a highly efficient and environmentally friendly flocculant, which was synthesized through plasma-induced graft copolymerization of CS and acrylamide (AM). The effects of monomer concentration, AM:CS ratio, discharge power, discharge time, post-polymerization temperature, and post-polymerization time on the intrinsic viscosity, grafting ratio, and grafting efficiency of CS-g-PAM were investigated. The optimum conditions of graft copolymerization were as follows: 20% monomer concentration, 7:3 AM:CS ratio, 40 W discharge power, 90 s discharge time, 50°C post-polymerization temperature, and 24 h post-polymerization time. The structural characteristics of CS-g-PAM were characterized by Fourier-transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction. CS-g-PAM exhibited better flocculation efficiency than the commercially available PAM in both diatomite-simulated wastewater and low-turbidity algal water. The optimal turbidity removal efficiency for the diatomite-simulated wastewater was 99.9%, which was obtained with 6 mg L^-1 of CS-g-PAM at pH 11.0 and 250 s^-1 of velocity gradient. In low-turbidity algal water, the optimal removal efficiencies for chlorophyll-a, turbidity, and COD were 93.6%, 94.5%, and 98.2%, respectively.

Porous biochar composite assembled with ternary needle-like iron-manganese-sulphur hybrids for high-efficiency lead removal

Hierarchical porous biochar derived from corn straw containing ternary needle-like iron-manganese-sulphur composites (Fe-Mn-S@HCS) are fabricated, and their physicochemical characteristics and performance for Pb removal were examined in detail. Introduction of Mn (transition metal) into Fe-biochar composites can effectively alter the chemical state of Fe; simultaneous doping with S can enhance cation exchange for Pb removal. High uptake of Pb by Fe-Mn-S@HCS in a short time period was observed with the adsorption capacity of 181.5 mg g^-1 and the pseudo-second-order rate constant of 0.075 g mg^-1 h^-1. Complexation, reduction, and precipitation were found to be involved in the Pb removal by Fe-Mn-S@HCS based on the results of HRTEM, XPS, and XRD analyses. This study demonstrated the feasibility of Fe-Mn-S biochar composites for high-efficiency Pb removal from aqueous solution.

Norfloxacin and Bisphenol-A Removal Using Temperature-Switchable Graphene Oxide

Graphene oxide (GO) is a competitive candidate used for adsorption of emerging organic contaminants (EOCs) from water. To overcome GO's spontaneous aggregation tendency in adsorption and to ease contaminant desorption from the adsorbent for adsorbent regeneration, a modified GO (P-GO), with temperature-switchable hydrophilicity/hydrophobicity, obtained by grafting temperature-responsive poly( N- n-propylacrylamide) was proposed. Two model EOCs, norfloxacin (NOR) and bisphenol A (BPA), with distinct hydrophilicity/hydrophobicity were employed. P-GO showed significant temperature-responsive adsorption behaviors: P-GO was more hydrophilic at a lower temperature and was beneficial for the adsorption of hydrophilic NOR, whereas it turned more hydrophobic at a higher temperature and was preferred for the adsorption of hydrophobic BPA. Compared with GO, P-GO under corresponding optimal conditions had comparable large adsorption amounts for NOR because of an "adsorption site replacement" strategy and notably enhanced adsorption for BPA because of strengthened hydrophobic association. Main interfacial binding interactions were π-π electron donor-acceptor effect and H-bonding for NOR adsorption and hydrophobic association and H-bonding for BPA uptake. On the basis of the temperature-responsive adsorption behaviors and studied interfacial interactions, regeneration of the adsorbent at designed temperatures using water (without additional chemicals) as an eluent is realized. This achievement is important for reducing risks of secondary environmental pollution during regeneration and easing further recovery of organic contaminants if needed.