Electroactive and High Dielectric Folic Acid/PVDF Composite Film Rooted Simplistic Organic Photovoltaic Self-Charging Energy Storage Cell with Superior Energy Density and Storage Capability

Recent progress in the study of integrated solar cell-energy storage systems

As fossil fuels continue to deplete, the development of sustainable and green energy sources has become crucial for human societal advancement. Among the various renewable energies, solar energy stands out as a promising substitute for conventional fossil fuels, offering widespread availability and a pollution-free solution. Solar cells, as devices that convert solar energy, are garnering significant focus. However, the intermittent nature of solar energy results in a high dependence on weather conditions of solar cells. Integrated solar cell-energy storage systems that integrate solar cells and energy storage devices may solve this problem by storing the generated electricity and managing the energy output. This review delves into the latest developments in integrated solar cell-energy storage systems, marrying various solar cells with either supercapacitors or batteries. It highlights their construction, material composition, and performance. Additionally, it discusses prevailing challenges and future possibilities, aiming to spark continued advancement and innovation in the sector.

Electroactive CTAB/PVDF composite film based photo-rechargeable hybrid power cell for clean energy generation and storage

Herein, electroactive polymer based photo-induced hybrid power cell has been developed using CTAB/PVDF composite film in a sustainable manner. First high dielectric polymer film has been prepared by doping CTAB in PVDF matrix via solution casting method. In the basic configuration of this hybrid power cell, aqueous electrolyte solution of PVA-MnO₂-Eosin Y has been utilized as solar light absorber and photo-electron generator whereas the high dielectric CTAB/PVDF (~ 400) is used as dielectric separator cum storage part in a very transparent way. The cell shows maximum voltage [Formula: see text] 1.1 V with short-circuit current density ~ 7.83 mA/cm² under ~ 110 mW/cm² normal light illumination. The device reveal almost same performance for a long time (30 days). The high storage impact of the hybrid cell is investigated by its promising conversion efficiency [Formula: see text] with energy density and power density [Formula: see text] mWh/m² and [Formula: see text] 5.5 W/m² respectively.

Regulated-biofilms enhance the permeate flux and quality of gravity-driven membrane (GDM) by in situ coagulation combined with activated alumina filtration

It is a critical challenge for drinking water production when treating algae-contaminated surface water. In this study, the impact of in situ coagulation (C), activated alumina filtration (AA) and their combination (CAA) on the performance of gravity-driven membrane (GDM) was systematically assessed during 105-day operation. The results indicated that pretreatments in particular CAA could effectively enhance GDM flux, and the stable fluxes were increased to 3.1, 4.9 and 8.3 L/(m2·h) (LMH) for CGDM, AA/GDM and CAA/GDM, respectively when compared to the control GDM (2.0 LMH). Coagulation was beneficial to formation of thick but loose biofouling layer, while AA filtration was effective to retain foulants including extracellular polymeric substances (EPS), organics, total nitrogen and total phosphorus. The CAA/GDM could mostly remove these foulants, and facilitate the proliferation of bacterial genera that could consume EPS, further alleviating membrane fouling. The difference in loosely bound EPS and tightly bound EPS of biofouling layer attributed to the difference of reversible fouling and irreversible fouling, respectively. Morphological observations, variation in functional groups or elements further confirmed the difference in biological layers in different GDM systems. The occurrence of specific bacterial genera involving the potential to degrade protein, chitin and other high molecular weight organics was responsible for contaminant removals.

Development of a Sustainable and Biodegradable Sonchus asper Cotton Pappus Based Piezoelectric Nanogenerator for Instrument Vibration and Human Body Motion Sensing with Mechanical Energy Harvesting Applications

Energy harvesting from natural resources has gained much attention due to the huge increase in the demand for portable electronic devices and the shortage of conventional energy resources in general. In the present work, the fabrication and realistic applications of a piezoelectric nanogenerator (PENG) using polydimethylsiloxane (PDMS) and the abundantly available, environment-friendly natural fiber Sonchus asper (SA) have been discussed. The biocompatible, low-cost SA fibers were flexible enough and showed high piezoelectric properties as active materials in the study. The SA pappus based piezoelectric nanogenerator demonstrated its ability to convert the harvested biomechanical energy into electrical energy from the various mechanical energy sources available in our environment. The SA pappus/PDMS thin film based piezoelectric nanogenerator (SPENG) fabricated in the laboratory showed colossal output performances (open circuit output voltage, V _OC ∼81.2 V; short circuit current, I _SC ∼1.0 μA) by continuous finger impartation. Uniform output performance was also obtained by the application of uniform force on the devices (e.g., ∼42 V for 5 N force at 10 Hz frequency). The SPENG was capable to charge a 2.2 μF capacitor to 3.2 V within a short time span (16 s) under continuous finger impartation and illuminate 39 commercial high-power blue LEDs that were connected in series. Thus, the fabricated SPENG can be used as a green and portable energy source to power up portable electronic devices. Apart from this, the SPENG may also be used as a self-powered energy supply for pacemakers or different types of health care units if properly improvised.

Portable Self-Powered Piezoelectric Nanogenerator and Self-Charging Photo-Power Pack Using In Situ Formed Multifunctional Calcium Phosphate Nanorod-Doped PVDF Films

Herein, biocompatible Ca₃(PO₄)₂ nanorod-incorporated poly(vinylidene) difluoride films have been prepared via an in situ process. A good piezoelectricity (d₃₃ ≈ 56.6 pC/N) along with a large dielectric constant of ∼3.48 × 10⁵ at frequency 20 Hz has been achieved. Then, we have designed a biocompatible, highly durable, low-cost piezoelectric nanogenerator (CPNG) which shows the superiority in open-circuit voltage ∼47 V and current ∼1.8 μA generation with power density ∼47.4 mW cm^-3 under the gentle touch of a finger. Excellent mechanical to electrical energy conversion efficiency (∼65.5%) of our developed CPNG leads to fast charging of a capacitor of 1 μF in 18 s and glowing of 26 light-emitting diodes (LEDs) under finger impartation. Further, a portable light-charging power pack (LCPP) has been developed using the high dielectric film as the storage function. Under light illumination, our LCPP generates open-circuit output voltage ∼1.29 V with short-circuit current 5.7 mA cm^-2. Areal capacitance ∼1779 F m^-2 and storage efficiency ∼88% are achieved. The device is able to lighten up 22 LEDs for 10 days after charging once.

Morphological interference of two different cobalt oxides derived from a hydrothermal protocol and a single two-dimensional metal organic framework precursor to stabilize the β-phase of PVDF for flexible piezoelectric nanogenerators

Here, we have fabricated a piezoelectric nanogenerator (PENG) composed of a Co-oxide (Co₃O₄) doped electro active PVDF based nanocomposite for efficient piezoelectric energy harvesting application where the Co₃O₄ inclusion favours nucleation and polar β-phase stabilization in the nanocomposite. The morphological effect on the nucleation and β-phase stabilisation of PVDF has been explored experimentally. The flake-like morphology of Co₃O₄ nanoparticles, synthesized by using a MOF, has a more effective surface area to nucleate and stabilise the β-phase of PVDF than that of rod-like (hydrothermal) and spherical (commercial) nanoparticles. The PENG with PVDF and the 1.5 wt% MOF based Co₃O₄ (MPNG) shows an excellent open circuit voltage (∼37 V) and short circuit current (∼0.711 μA) upon human finger tapping. The maximum power density generated from the MPNG is ∼8.55 μW cm^-2, which is well sufficient for the driving of portable electronic devices like LEDs, calculator wrist watches, humidity sensors etc. Also, from various easily accessible mechanical and biomechanical energy sources like heel pressing, walking, and machine vibration, the MPNG is capable of harvesting energy.

Smart ultrafiltration membrane fouling control as desalination pretreatment of shale gas fracturing wastewater: The effects of backwash water

BACKGROUND

Increasing attention is being paid to the treatment of shale gas fracturing wastewater, including flowback and produced water (FPW). Energy-efficient pretreatment technologies suitable for desalinating and reusing FPW are of paramount importance.

OBJECTIVES

This work focused on enhanced fouling alleviation of ultrafiltration (UF) as a pretreatment for desalinating shale gas FPW in Sichuan Basin, China. The UF fouling behaviors under various backwash water sources or coagulant dosages were evaluated, and membrane surface characteristics were correlated with UF fouling. The feasibility of Fourier transform infrared (FTIR) microscope mapping technique in quantifying UF fouling was also assessed.

METHODS

Various backwash water sources, including UF permeate, ultrapure water, nanofiltration (NF) permeate, reverse osmosis (RO) permeate, RO concentrate and forward osmosis (FO) draw solution, were used to clean UF membranes fouled by shale gas FPW. The UF fouling behaviors were characterized by total and non-backwashable fouling rates. Membrane surface characteristics were analyzed by scanning electron microscopy (SEM), total tension surface and FTIR spectra.

RESULTS

Protein-like substances in terms of fluorescence intensity in the backwash water decreased with the order of UF permeate, RO concentrate, NF permeate, RO permeate and FO draw solution. Compared with UF permeate backwashing, alleviated UF fouling was observed by using demineralized backwash water including ultrapure water and RO permeate, irrespective of hollow fiber and flat-sheet membranes. NF permeate and RO concentrate after NF used as backwash water resulted in low and comparable membrane fouling with that in integrated coagulation-UF process under optimal dosage. Among the backwash water tested, FO draw solution backwashing corresponded to the lowest UF fouling rates, which were even lower than that in the presence of coagulant under optimal dosage. The superiority of these backwash water sources to UF permeate was further confirmed by SEM images and FTIR spectra. The residual foulant mass on membrane surface and the total surface tension correlated well with non-backwashable and total fouling rates, respectively.

CONCLUSIONS

FTIR microscopy was a powerful surface mapping technique to characterize UF membrane fouling caused by shale gas FPW. Backwash water sources significantly influenced the fouling of UF membranes. In the integrated UF-NF-RO or UF-FO process, RO concentrate or FO draw solution were proposed as backwash water to enhance UF fouling control and decrease waste discharge simultaneously.

Photo-Rechargeable Organic-Inorganic Dye-Integrated Polymeric Power Cell with Superior Performance and Durability

In the present work, we propose a simple and unique approach to design a lightweight, low-cost, self-charging power cell with considerable capacity to generate and store photocharges named self-charged photo-power cell (SCPPC). Initially, highly electroactive sodium dodecyl sulfate (SDS)-incorporated poly(vinylidene fluoride) (PVDF) composite thin films with a large dielectric constant of ∼525 are synthesized via a simplistic solution casting process. Then, the as-prepared high-dielectric SDS/PVDF thin film is used as a charge-storage medium in combination with an inorganic-organic dye film, i.e., ZnO nanoparticles-eosin Y-poly(vinylpyrrolidone) film, as a photoelectron generator in our SCPPC. An open-circuit voltage of ∼1.2 V is attained after charging SCPPC under illumination light with intensity ∼110 mW/cm² and then discharging fully with a constant current density of ∼4.5 mA/cm². A specific areal capacitance of ∼450 F/m² is obtained with large energy and power densities of ∼90 mWh/m² and 54 W/m², respectively. The improved overall efficiency, ∼3.78%, along with 89% storage efficiency leads to promising application possibilities of our rechargeable photo-power cell. The recyclability, i.e., rechargeability and storage durability, of the photo-power cell are also checked for 35 days without no such reduction in voltage generation and storage. Also, multicolored light-emitting diodes are lightened up using the photo-power cell as power source.

Enhanced Dielectric and Mechanical Properties of Ternary Composites via Plasticizer-Induced Dense Interfaces

High overall performance, including high dielectric constant, low loss, high breakdown strength, fine flexibility, and strong tensile properties, is difficult to achieve simultaneously in polymer nanocomposites. In our prior work, we modified the surfaces of alpha-SiC nanoparticles and chemically cross-linked the polymeric matrix to simultaneously promote the dielectric and mechanical properties of composites. In this work, a novel strategy of high-temperature plastification towards a polymeric matrix has been proposed to fabricate ternary nanocomposites with balanced dielectric and mechanical characteristics by the solution cast method in order to reduce costs and simplify steps during large-scale preparation. Poly(vinylidene fluoride-chlorotrifluoroethylene) with inner double bonds as matrix, unfunctionalized alpha-SiC nanoparticles (NPs) as filler, and dibutyl phthalate (DBP) as plasticizer were employed. By introducing DBP and high-temperature treatment, the dispersion of NPs and the degree of compactness of the interface regions were both improved due to the reduced cohesion of the fluoropolymer, resulting in an increase in the dielectric constant (by 30%) and breakdown strength (by 57%) as well as the lowering of loss (by 30%) and conductivity (by 16%) in nanocomposites. Moreover, high-temperature plastification contributed to the promotion of flexible and tensile properties. This work might open the door to large-scale fabrication of nanocomposite dielectrics with high overall properties through the cooperation of the plasticizer and high temperature.