Supramolecular Cross-Link-Regulated Emission and Related Applications in Polymer Carbon Dots

Rhodamine B-Derived Low-Toxicity Full-Color Carbon Dots with Wide Tunable High-Stable Liquid-State Lasers

Carbon dots (CDs) serve as a novel, non-toxic, cost-effective, and highly-stable solution-processable nanolaser material. However, compared to commonly used commercial laser dyes, CDs exhibit lower photoluminescence quantum yields (PLQYs), radiation transition rates, and gain coefficients. Consequently, this leads to higher laser thresholds that significantly impede the expansion of practical applications for CDs. Therefore, enhancing the gain performance of CDs is crucial in guiding the design of CD gain materials and promoting their practical applications. Herein, Rhodamine B (RhB) is employed as a sole precursor for the synthesis of full-color CDs (FCDs) with vibrant blue, green, yellow, red, and NIR (denoted as B-CDs, G-CDs, Y-CDs, R-CDs, and NIR-CDs) fluorescence through cross-linking, polymerization, and carbonization processes. The photoluminescence (PL) spectra ranged from 434 to 703 nm. Notably, the PLQYs and gain performance of FCDs are improved due to cross-linked enhanced emission (CEE) effects. Green, yellow, red, and NIR laser emission is achieved with lower laser thresholds and exhibited superior laser stabilities than RhB. Furthermore, cytotoxicity tests confirm that FCDs possess significantly lower toxicity than RhB. This study not only validates the applicability of CEE in CDs for developing multicolor gain materials but also advances the practical application of miniaturized lasers based on CDs.

Carbonized Polymer Dot-Tannic Acid Nanoglue: Tissue Reinforcement with Concurrent Fluorescent Tracking, Insulin Delivery, and Reactive Oxygen Species Regulation for Normal and Diabetic Wound Healing

Nanotizing biosealant components offer a multitude of chemical functionalities for superior adhesion-cohesion, delivering unique properties for comprehensive wound healing that are otherwise impossible to achieve using commercial variants. For the first time, a two-step controlled hydrothermal pyrolysis is reported to nanotize dopamine, phloroglucinol, and glutaraldehyde into carbon dot (CD) to be subsequently converted into carbonized polymer dot (CPD) with gelatin as a co-substrate. Chemical crosslinking of CD with gelatin through Schiff base formation before the second pyrolysis step ensures a complex yet porous polymeric network. The retention of chemical functionalities indigenous to CD substrates and gelatin along with the preservation of CD photoluminescence in CPD for optical tracking is achieved. A unique nanoformulation is created with the CPD through tannic acid (TA) grafting evolving CPD-TA nanoglue demonstrating ≈1.32 MPa strength in lap shear tests conducted on porcine skin, surpassing traditional bioadhesives. CPD-TA nanoglue uploaded insulin as chosen cargo disbursal at the wound site for healing normal and in vitro diabetic wound models using HEKa cells with extraordinary biocompatibility. Most importantly, CPD-TA can generate reactive oxygen species (ROS) and scavenge simultaneously under ambient conditions (23 W white LED or dark) for on-demand sterilization or aiding wound recovery through ROS scavenging.

Symmetry-Triggered Tunable Phosphorescence Lifetime of Graphene Quantum Dots in a Solid State

Studying the phosphorescent mechanisms of carbon nanostructures synthesized by the "bottom-up" approach is key to understanding the structure modulation and the interfacial properties of carbon nanostructures. In this work, the relationships among symmetry of precursors in the "bottom-up" synthesis, structures of products, and phosphorescence lifetimes of graphene quantum dots (GQDs) are studied. The symmetry matching of precursors in the formation of a D6h graphene-like framework is considered the key factor in controlling the separability of sp2 domains in GQDs. As the separability of sp2 domains in GQDs increases, the phosphorescence lifetimes (14.8-125.5 ms) of GQDs in the solid state can be tuned. Machine learning is used to define the degree of disorder (S) of the GQD structure, which quantitatively describes the different space groups of precursors. The negative correlation between S and the oscillator strength of GQDs is uncovered. Therefore, S can be recognized as reflective of oscillator strength in the GQD structure. Finally, based on the correlations found between the structures and phosphorescence lifetimes of GQDs, GQDs with an ultralong phosphorescence lifetime (28.5 s) are obtained. Moreover, GQDs with visible phosphorescence emission (435-618 nm) are synthesized.

Covalently hybridized carbon dots@mesoporous silica nanobeads as a robust and versatile phosphorescent probe for time-resolved biosensing and bioimaging

Phosphorescence analyses have attracted broad attention due to their remarkable merits of the elimination of auto-fluorescence and scattering light. However, it remains a great challenge to develop novel materials with uniform size and morphology, stability, long lifetime, and aqueous-phase room temperature phosphorescence (RTP) characteristics. Herein, monodisperse and uniform RTP nanobeads were fabricated by an in situ covalent hybridization of carbon dots (CDs) and dendritic mesoporous silicon nanoparticles (DMSNs) via silane hydrolysis. The formation of Si-O-C and Si-C/N covalent bonds is beneficial for the fixation of vibrations and rotations of the luminescent centers. Specially, the nanopores of DMSNs provide a confined area that can isolate the triplet state of CDs from water and oxygen and thus ensure the occurrence of aqueous-phase RTP with an ultra-long lifetime of 1.195 s (seen by the naked eye up to 9 seconds). Through surface modifying folic acid (FA), CDs@DMSNs can serve as a probe to distinguish different cell lines that feature varying FA receptor expression levels. In addition, taking MCF-7 as the model, highly sensitive and quantitative detection (linear range: 103-106 cells per mL) has been achieved via an RTP probe. Furthermore, their potential applications in cellular and in vivo time-gated phosphorescence imaging have been proposed and demonstrated, respectively. This work would provide a new route to design CD-based RTP composites and promote their further applications in the medical and biological fields.

Based on FRET to construct color-tunable ultralong lifetime room temperature phosphorescent carbon dots in aqueous solution

Room temperature phosphorescent (RTP) Carbon Dots have been capturing increasing attention in recent years, while building a general method to adjust the emission color of RTP carbon dots is still a big challenge. Herein we report a simple method that combine the carbon nanodots and dyes (R6G and DCF) in SiO2 nanosphere to get a series of multicolor RTP nanodots (CD@SiO2@dye) with long lifetime in aqueous solution. Leverage on chitosan quaternary ammonium as matrix and diethylenetriamine as N-doping resource to form a cross-linked skeleton as a luminescent center (namely CD), and a rigid network is formed by silica encapsulation (CD@SiO2) to restrict the non-radiative transition process to generate the phosphorescence. The CD-based composites, with 1.10 s green (503 nm) phosphorescence emission, serve as activator to stimulate the corresponding luminescence of organic dyes. Then, based on Förster resonance energy transfer (FRET) process from CDs (as donor) to organic dyes (as acceptor) under UV excitation, the CD@SiO2@R6G emit ultra-long lifetime (1.13 s) orange-yellow (570 nm) afterglow, and CD@SiO2@DCF emit ultra-long lifetime (1.20 s) yellow-green afterglow (530 nm). Furthermore, it also achieves RTP colors control when the ratio of CDs and the dyes changes, the ratio of green emission and dye's emission activated by CDs will gradually change as well. These kinds of materials keep the inherent advantages of low toxicity and luminous stability, and achieve adjustable RTP color in aqueous solution. Our research provides a strategy to synthesize water-soluble long-life RTP CDs with adjustable color and lifetime.

The emergence and prospects of carbon dots with solid-state photoluminescence for light-emitting diodes

The significant features of carbon dots (CDs), such as bright and tunable photoluminescence, high thermal stability, and low toxicity, endow them with tremendous potential for application in next generation optoelectronics. Despite great progress achieved in the design of high-performance CDs so far, the practical applications in solid-state lighting and displays have been retarded by the aggregation-caused quenching (ACQ) effect ascribed to direct π-π interactions. This review provides a comprehensive overview of the recent progress made in solid-state CD emitters, including their synthesis, optical properties and applications in light-emitting diodes (LEDs). Their triplet-excited-state-involved properties, as well as their recent advances in phosphor-converted LEDs and electroluminescent LEDs, are mainly reviewed here. Finally, the prospects and challenges of solid-state CD-based LEDs are discussed with an eye on future development. We hope that this review will provide critical insights to inspire new exciting discoveries on solid-state CDs from both fundamental and practical standpoints so that the realization of their potential in optoelectronic areas can be facilitated.

Enabling Carbonized Polymer Dots with Color-tunable Time-dependent Room Temperature Phosphorescence through Confining Carboxyl Dimer Association

Developing a facile strategy to realize fine-tuning of phosphorescence color in time-dependent room temperature phosphorescence (RTP) materials is essential but both theoretically and practically rarely exploited. Through simultaneously confining carboxyl dimer association and isolated carboxyl into the particle via a simple hydrothermal treatment of polyacrylic acid, a dual-peak emission of red phosphorescence (645 nm) and green phosphorescence (550 nm) was observed from carbonized polymer dots (CPDs). The ratio of the two luminescent species can be well regulated by hydrochloric acid inhibiting the dissociation of carboxyl to promote hydrogen bond. Due to comparable but different lifetimes, color-tunable time-dependent RTP with color changing from yellow to green or orange to green were obtained. Based on the crosslinking enhanced emission effect, the phosphorescence visible time was even extended to 7 s through introducing polyethylenimide. This study not only proposes a novel and facile method for developing CPDs with color-tunable time-dependent RTP, but also provides a bran-new non-conjugated red phosphorescence unit and its definite structure.

Dual-functional molecularly imprinted doped carbon dot based on metal-organic frameworks for tetracycline adsorption and determination

A carbon dot (CD) was prepared by using tryptophan as a single carbon source and demonstrated its good selective fluorescence quenching effect on tetracycline (TC). The modified metal-organic frameworks (MOF) NH2-MIL-101 was chosen as matrix, doped with CD, molecularly imprinted polymer (MIP) prepared with TC as the template, and finally CD-MOF-MIP complexes (CD@MIP) was synthesized. For comparison, MIP were also prepared without CD as well as non-imprinted polymers and their ability was tested, respectively. CD@MIP is a nanomaterial with bright fluorescence under the irradiation of ordinary UV equipment (λ = 360 nm), which has a fast and stable fluorescence quenching for TC and a good linear relationship for TC in the concentration range 0-400 μmol L-1. The quantum yield of CD@MIP was 12.75% and the 3σ limit of detection (LOD) for CD@MIP was 0.59 μmol L-1. The maximum adsorption capacity of CD@MIP reached 304.6 mg g-1 and the adsorption equilibrium was reached after about 75 min. The adsorption of CD@MIP to tetracycline spiked in milk samples reached 90.0 mg g-1 within 2 h, which was much higher than that of NIP (48.4 mg g-1) under the same conditions, as demonstrated by high performance liquid chromatography (HPLC). The results obtained showed that CD@MIP combined the high adsorption capacity of MOF, the specific adsorption of molecular imprinting and the fluorescence properties of CD, can determine and rapidly removeTC in the environment.

Carbonized Polymer Dot Probe for Two-Photon Fluorescence Imaging of Lipid Droplets in Living Cells and Tissues

As a dynamic and multifunctional organelle, lipid droplets (LDs) are essential in maintaining lipid balance and transducing biological signals. LD accumulation and catabolism are closely associated with energy metabolism and cell signaling. In order to easily trace LDs in living cells, a novel carbonized polymer dot (CPD)-based fluorescent nanoprobe is reported to serve the needs of LD-targeting imaging. This probe exhibits the advantages of excellent biocompatibility, simple preparation, good lipophilicity, and high compatibility with commercial dyes. Transient absorption spectroscopy was employed to discuss the luminescence mechanism of CPDs, and the results indicate that the excellent fluorescence property and the environment-responsive feature of our CPDs are derived from the intramolecular charge transfer (ICT) characteristics and the D-π-A structure that possibly formed in CPD. This nanoprobe is available for one-photon fluorescence (OPF) and two-photon fluorescence (TPF) imaging and is also practicable for staining LDs in living/fixed cells and lipids in tissue sections. The staining process is completed within several seconds, with no washing step. The intracellular LDs involving the intranuclear LDs (nLDs) can be selectively lit up. This probe is feasible for visualizing dynamic interactions among LDs, which suggests its great potential in revealing the secret of LD metabolism. The in situ TPF spectra were analyzed to determine surrounding microenvironment according to the polarity-responsive feature of our CPDs. This work expands the applications of CPDs in biological imaging, helps design new LD-selective fluorescent probes, and has implications for studying LD-related metabolism and diseases.

Investigation into Red Emission and Its Applications: Solvatochromic N-Doped Red Emissive Carbon Dots with Solvent Polarity Sensing and Solid-State Fluorescent Nanocomposite Thin Films

In this work, a NIR emitting dye, p-toluenesulfonate (IR-813) was explored as a model precursor to develop red emissive carbon dots (813-CD) with solvatochromic behavior with a red-shift observed with increasing solvent polarity. The 813-CDs produced had emission peaks at 610 and 698 nm, respectively, in water with blue shifts of emission as solvent polarity decreased. Subsequently, 813-CD was synthesized with increasing nitrogen content with polyethyleneimine (PEI) to elucidate the change in band gap energy. With increased nitrogen content, the CDs produced emissions as far as 776 nm. Additionally, a CD nanocomposite polyvinylpyrrolidone (PVP) film was synthesized to assess the phenomenon of solid-state fluorescence. Furthermore, the CDs were found to have electrochemical properties to be used as an additive doping agent for PVP film coatings.

Solid-State Fluorescent Carbon Dots with Unprecedented Efficiency from Visible to Near-Infrared Region

Developing solid-state luminescent materials with bright long-wavelength emissions is of considerable practical importance in light-emitting diodes (LEDs) but remains a formidable challenge. Here, a novel structure engineering strategy is reported to realize solid-state fluorescence (FL)-emitted carbon dots (CDs) from visible to near-infrared region. This is the first report of such an extended wavelength emission of self-quenching-resistant solid-state CDs. Notably, the quantum yields of these CDs are remarkably improved up to 67.7%, which is the highest value for solid-state CDs. The surface polymer chains of CDs can efficiently suppress the conjugated sp² carbon cores from π-π stacking inducing aggregation caused FL quenching, and the redshift of FL emissions is attributed to narrowing bandgap caused by an enlarged sp² carbon core. Using these CDs as conversion phosphors, the fabrication of white LEDs with adjustable correlated color temperatures of 1882-5019 K is achieved. Moreover, a plant growth LED device is assembled with a blue-LED chip and deep-red/near-infrared-emitted CDs. Compared with sunlight and white LEDs, the peanuts irradiated by plant growth LED lamp show higher growth efficiency in terms of branches and leaves. This work provides high-quality solid-state CD-based phosphors for LED lighting sources that are required for diverse optoelectronic applications.

The Advance and Critical Functions of Energetic Carbon Dots in Carbon Dioxide Photo/Electroreduction Reactions

As a unique carbon-based nano material, carbon dots (CDs) have attracted great attention because of their special structures and properties, and have been widely used in various fields, such as bio-imaging technology, catalyst design, pollutant degradation, chemical analysis, clean energy development and so on. CDs are used as catalysts or cocatalysts for multiple energy conversion reactions due to their advantages of valid visible light utilization, fast transmission of charge carriers, excellent catalytic activity, and good electrical conductivity. This review first summarizes the basic structure and properties of CDs. The advance and critical functions of energetic CDs in carbon dioxide photo/electroreduction reactions are discussed in detail. Due to the excellent optical absorption, electron transfer properties and good conductivity of CDs, they can enhance catalytic activity and stability effectively. In the end, the existing problems and future development opportunities of CDs-based catalysts in CO₂ reduction reaction are proposed and outlined.

Preparation of Multicolour Solid Fluorescent Carbon Dots for Light-Emitting Diodes Using Phenylethylamine as a Co-Carbonization Agent

Carbon dots (CDs), as a new type of photoluminescent nanomaterial, have attracted extensive attention in various fields because of their unique luminescence properties. However, CDs will exhibit fluorescence quenching in the solid state or aggregate state, which limits their application. In this paper, a unique strategy is proposed to regulate solutions to achieve multicolour fluorescence of CDs in the solid state. We report the successful preparation of orange, green and blue solid fluorescent CDs using citric acid, urea and phenylethylamine as precursors and methanol, ethanol and water as solvents, respectively. The solid-state fluorescence of CDs may be caused by the linkage of the phenylethyl structure to the surface of CDs during formation, which effectively disperses the CDs and prevents π-π interactions between graphitized nuclei. Meanwhile, multicolour solid fluorescent CDs are realized by adjusting the solvent in the preparation process. Based on the excellent fluorescence properties of CDs, orange, green and blue light-emitting diodes (LEDs) are prepared. A white LED (WLED) can be obtained by mixing the three colours of solid fluorescent CDs, which shows the application potential of CDs in display lighting equipment.

Non-toxic Polymeric Dots with the Strong Protein-Driven Enhancement of One- and Two-Photon Excited Emission for Sensitive and Non-destructive Albumin Sensing

The need for efficient probing, sensing, and control of the bioactivity of biomolecules (e.g., albumins) has led to the engineering of new fluorescent albumins' markers fulfilling very specific chemical, physical, and biological requirements. Here, we explore acetone-derived polymer dots (PDs) as promising candidates for albumin probes, with special attention paid to their cytocompatibility, two-photon absorption properties, and strong ability to non-destructively interact with serum albumins. The PDs show no cytotoxicity and exhibit high photostability. Their pronounced green fluorescence is observed upon both one-photon excitation (OPE) and two-photon excitation (TPE). Our studies show that both OPE and TPE emission responses of PDs are proteinaceous environment-sensitive. The proteins appear to constitute a matrix for the dispersion of fluorescent PDs, limiting both their aggregation and interactions with the aqueous environment. It results in a large enhancement of PD fluorescence. Meanwhile, the PDs do not interfere with the secondary protein structures of albumins, nor do they induce their aggregation, enabling the PD candidates to be good nanomarkers for non-destructive probing and sensing of albumins.

Self-Matrix N-Doped Room Temperature Phosphorescent Carbon Dots Triggered by Visible and Ultraviolet Light Dual Modes

The synthesis of room temperature phosphorescent carbon dots (RTP-CDs) without any matrix is important in various applications. In particular, RTP-CDs with dual modes of excitation are more interesting. Here, we successfully synthesized matrix-free carbonized polymer dots (CPDs) that can generate green RTP under visible and ultraviolet light dual-mode excitation. Using acrylic acid (AA) and ammonium oxalate as precursors, a simple one-pot hydrothermal method was selected to prepare AA-CPDs. Here, acrylic acid is easy to polymerize under high temperature and high pressure, which makes AA-CPDs form a dense cross-linked internal structure. Ammonium oxalate as a nitrogen source can form amino groups during the reaction, which reacts with a large number of pendant carboxyl groups on the polymer chains to further form a cross-linked structure. The carboxyl and amino groups on the surface of AA-CPDs are connected by intermolecular hydrogen bonds. These hydrogen bonds can provide space protection (isolation of oxygen) around the AA-CPDs phosphor, which can stably excite the triplet state. This self-matrix structure effectively inhibits the non-radiative transition by blocking the intramolecular motion of CPDs. Under the excitation of WLED and 365 nm ultraviolet light, AA-CPDs exhibit the phosphorescence emission at 464 nm and 476 nm, respectively. The naked-eye observation exceeds 5 s and 10 s, respectively, and the average lifetime at 365 nm excitation wavelength is as long as 412.03 ms. In addition, it successfully proved the potential application of AA-CPDs in image anti-counterfeiting.

Polymer Carbon Nanodots: A Novel Electrochemiluminophore for Dual Mode Detection of Ferric Ions

The development of simple and effective dual-mode analytical methods plays crucial regulatory roles in the discrimination of relevant target species, because of their built-in cross reference correction and high accuracy. In this work, a novel polymer carbon nanodots (PCNDs) prepared from a facile one-pot hydrothermal procedure using readily available l-tryptophan and l-phenylalanine as precursors, showed excellent aqueous solubility and blue fluorescence property with a high quantum yield of 29%. Moreover, the PCNDs was demonstrated to be a robust luminophore with electrochemiluminescence (ECL) efficiency of 43% was achieved by using K₂S₂O₈ as a coreactant. The spooling ECL spectroscopy was employed to take insight into excited states responsible for the potential-dependent ECL emissions. Most importantly, when introduced into construction of the fluorescence and ECL dual mode sensing platform, for the first time, the PCNDs displayed prominent performance for the detection of ferric ions (Fe³⁺). The ferric ions could be quantified ranging from micromolar to millimolar with a detection limit of 0.22 and 5.3 μM, respectively. Such a dual-functional sensing platform also exhibits excellent selectivity, reproducibility and stability. Results from this work indicate that PCNDs showing great promise as a bright luminophore for the fabrication of low-cost, high-performance dual-signal readout platforms for ferric ions determination.

Confined-domain crosslink-enhanced emission effect in carbonized polymer dots

Revealing the photoluminescence (PL) origin and mechanism is a most vital but challenging topic of carbon dots. Herein, confined-domain crosslink-enhanced emission (CEE) effect was first studied by a well-designed model system of carbonized polymer dots (CPDs), serving as an important supplement to CEE in the aspect of spatial interactions. The "addition-condensation polymerization" strategy was adopted to construct CPDs with substituents exerting different degrees of steric hindrance. The effect of confined-domain CEE on the structure and luminescence properties of CPDs have been systematically investigated by combining characterizations and theoretical calculations. Such tunable spatial interactions dominated the coupling strength of the luminophores in one particle, and eventually resulted in the modulated PL properties of CPDs. These findings provide insights into the structural advantages and the PL mechanism of CPDs, which are of general significance to the further development of CPDs with tailored properties.

Intrinsic Blue Fluorescence of 2.0G PAMAM-DCM Polymer Dots and Its Applications for Fe3+ Sensing

A typical and environment-friendly fluorescent polyamine-amine (PAMAM) features good compatibility and unique surface modification, while it is restricted by a low fluorescence property performance and an unclear fluorescence mechanism. In this work, we prepared blue fluorescent PAMAM polymer dots (PDs) via a simple hydrothermal method based on dichloromethane (DCM) and 2.0G PAMAM. The quantum yield achieved was 32.1%, which was 25 times stronger than that of 2.0G PAMAM due to the lone-pair electron leap of the amine groups, the aggregation of carbonyl groups, as well as the crosslinking induced by DCM inside the PAMAM. In addition, the fluorescent 2.0G PAMAM-DCM PDs show a great Fe3+ sensing property with the detection limit of 56.6 nM, which is much lower than the safety limits (5.36 μM) in drinking water, indicating its great potential for Fe3+ detection in aqueous media.

Make waste profitable: repurposing SAPO-34 coke from the methanol-to-olefin reaction for luminescent CDs@zeolite composites

An ecologically beneficial concept is offered to repurpose SAPO-34 coke from the methanol-to-olefin reaction into CDs@zeolite composites with multiple luminosities by a simple calcination.

Bathochromic-Shifted Emissions by Postfunctionalization of Nonconjugated Polyketones

Most nontraditional intrinsic luminescent (NTIL) polymers currently show blue fluorescence. Tuning the emission color of NTIL polymers is of fundamental importance for their applications, but it still remains a scientific challenge. Herein, we initially develop an efficient strategy for bathochromic shifting of NTIL polymers by through-space acceptor-donor charge transfer between the in chain and the side chain. A variety of functionalized polyketones (FPK-R; where R = H, Ph, Me, tBu, F, and Cl) with furan rings built into the polymer chain were prepared by the Paal-Knorr reaction. FPK-R polymers showed bright and bathochromic-shifted fluorescence compared with their counterparts. The emission color could be tuned by changing the postfunctionalization conversion and varying the styrenic monomer substituent. Experimental and theoretical investigations revealed that the color tunability originated from enhanced through-space charge transfer between the side chain phenyl and the in chain furan rings.

A new enhanced chemiluminescence reaction based on polymer dots for the determination of metronidazole

Polymer dots (PDs) with non-conjugated functional groups are attracting nanomaterials due to their ease of synthesis, the biocompatibility of precursors, and low toxicity. In this work, PDs with non-conjugated groups were synthesized with a simple and straightforward method by Schiff base reaction. Then their possible application in the chemiluminescence (CL) reactions was explored. Results were shown that PDs increased the CL intensity of the NaIO₄-fluorescein system about 15 times. Regarding the CL mechanism, we proved that the emitting species is fluorescein, which can be excited by the energy transfer from the excited-state PDs. It was observed that CL emission is promoted by the interaction of metronidazole (MND) with the PDs. Therefore, we designed a novel and sensitive assay for MND based on its enhancing effect on NaIO₄-fluorescein-PDs CL system. The introduced assay showed a linear response in the range of 5.0-300 nM with a detection limit of 1.5 nM. The method was used for the determination of MND in spiked plasma samples.

Recent Advances in Functional Carbon Quantum Dots for Antitumour

Carbon quantum dots (CQDs) are an emerging class of quasi-zero-dimensional photoluminescent nanomaterials with particle sizes less than 10 nm. Owing to their favourable water dispersion, strong chemical inertia, stable optical performance, and good biocompatibility, CQDs have become prominent in biomedical fields. CQDs can be fabricated by “top-down” and “bottom-up” methods, both of which involve oxidation, carbonization, pyrolysis and polymerization. The functions of CQDs include biological imaging, biosensing, drug delivery, gene carrying, antimicrobial performance, photothermal ablation and so on, which enable them to be utilized in antitumour applications. The purpose of this review is to summarize the research progress of CQDs in antitumour applications from preparation and characterization to application prospects. Furthermore, the challenges and opportunities of CQDs are discussed along with future perspectives for precise individual therapy of tumours.

Multifunctional room-temperature phosphorescent carbon dots for relative humidity determination and information encryption

The relative humidity (RH) determination is crucial in many fields. Based on the phosphorescent properties of room-temperature phosphorescent (RTP) carbon dots, the RTP carbon dots as a probe are expected to be used to rapidly detect relative humidity. In this study, matrix-free room-temperature phosphorescent N-doped carbon dots (N-CDs) were successfully prepared from urea, succinic acid, and acrylamide using a hydrothermal method. The as-synthesized N-CDs had good biocompatibility and water solubility. The N-CDs emitted blue fluorescence and green phosphorescence. Moreover, the N-CD powder exhibited stable phosphorescence with a phosphorescence lifetime of 158 ms (afterglow time to the naked eye for ~7 s). Because H₂O molecules affected the afterglow time, the as-prepared N-CD test paper for the first time could be applied as a probe to monitor RH, the afterglow time of the N-CD test paper is linearly related to the RH (y = -0.0729x+7.042, R² = 0.998) and the RH detection range is 0%-85%. And the results were consistent with those obtained using a hygrometer. In addition, the N-CD solution could also be used as an encryption ink in the advanced information security field.

Polyacrylamide-Based Binary Luminescent Copolymer Materials Exhibit Color-Tunable and Efficient Long-Lived Room Temperature Phosphorescence

Polymer-based pure organic room temperature phosphorescence (RTP) materials have garnered considerable interest, among which RTP systems with prolonged lifetimes and tunable emission colors are promising for applications in sensing, flexible electronics, bioassay, anti-counterfeiting, and data encryption. Herein, facile doping method is reported based on two types of copolymers with benzene/biphenyl-based light-emitting cores as their side chains, whereby the two copolymers are robustly crosslinked via noncovalent interactions including hydrogen bonding and halogen bonding that occur between the light-emitting cores and polyacrylamide backbones. Persistent RTP emission with prolonged lifetime up to 1.9 s and phosphorescence quantum yield as high as 40.1% are obtained in single copolymers, attributed to the conformation restriction of phosphorescent dyes originating from the rigid microenvironment. Furthermore, multicolor phosphorescence signals are observed in the doped binary luminescent copolymer systems that can be effectively regulated by the feed ratio of luminescent cores and irradiation wavelengths. Possible mechanisms for this efficient and long-lived color-tunable RTP system are discussed on the basis of the experimental data and theoretical calculations. In addition, it is also demonstrated that the color-tunable RTP emission of the doped copolymer systems under ambient conditions allows for further exploitation in the application of dynamic information encryption.

Water-Soluble Blue Fluorescent Nonconjugated Polymer Dots from Hyaluronic Acid and Hydrophobic Amino Acids

Fluorescent polymers have been increasingly investigated to improve their water solubility and biocompatibility to enhance their performance in drug delivery and theranostic applications. However, the environmentally friendly synthesis and dual functionality of such systems remain a challenge due to the complicated synthesis of conventional fluorescent materials. Herein, we generated a novel blue fluorescent polymer dot through chemical conjugation of hydrophobic amino acids to hyaluronic acid (HA) under one-pot green chemistry conditions. These nonconjugated fluorescent polymer dots (NCPDs) are water soluble, nontoxic to cells, have high fluorescence quantum yield, and can be used for in vitro bioimaging. HA-derived NCPDs exhibit excitation wavelength-dependent fluorescent properties. In addition, the NCPDs also show enhanced doxorubicin loading and delivery in naive and drug-resistant breast cancer cells in 2D and 3D tumor cellular systems. These results demonstrate the potential for successful synthetic scale-up and applications for HA-derived NCPDs.

Reversible Stimuli-Dependent Aggregation-Induced Emission from a "Nonfluorescent" Amphiphilic PVDF Graft Copolymer

A poly(vinylidine fluoride) graft random copolymer of t-butyl aminoethyl methacrylate (tBAEMA) and oligo(ethylene glycol) methyl ether methacrylate (OEGMA, Mn = 300) [PVDF-g-P(tBAEMA-ran-OEGMA), PVBO] is synthesized by atom transfer radical polymerization (ATRP), and PVBO is fractionated to get a highly water-soluble fraction (PVBO-1) showing a reversible on/off fluorescence behavior with gradual increase and decrease in pH, respectively, achieving a maximum quantum yield of 0.18 at pH = 12. PVBO-1 dissolved in water shows large multimicellar aggregates (MMcA), but at pH 12, crumbling of larger aggregates to much smaller micelles occurs, forming nonconjugated polymer dots (NCPDs), as supported by transmission electron microscopy and dynamic light scattering study. The reversible fluorescence on/off behavior also occurs with the decrease and increase of temperature. Theoretical study indicates that, at high pH, most of the amino groups become neutral and exhibit a strong tendency to form aggregates from crowding of a large number of carbonyl and amine groups, minimizing the HOMO-LUMO gap, showing an absorption peak at the visible region, and generating aggregation-induced emission.

Silica-coupled carbon nanodots: multicolor fluorescence governed by the surface structure for fingerprint recognition and WLED devices

This study shows a solvent-engineered strategy for the controlled synthesis of N-CNDs/silica with blue and green fluorescence, respectively, and applied to detect latent fingerprints and fabricate LED devices.

Carbon Dots: A New Type of Carbon-Based Nanomaterial with Wide Applications

Carbon dots (CDs), as a new type of carbon-based nanomaterial, have attracted broad research interest for years, because of their diverse physicochemical properties and favorable attributes like good biocompatibility, unique optical properties, low cost, ecofriendliness, abundant functional groups (e.g., amino, hydroxyl, carboxyl), high stability, and electron mobility. In this Outlook, we comprehensively summarize the classification of CDs based on the analysis of their formation mechanism, micro-/nanostructure and property features, and describe their synthetic methods and optical properties including strong absorption, photoluminescence, and phosphorescence. Furthermore, the recent significant advances in diverse applications, including optical (sensor, anticounterfeiting), energy (light-emitting diodes, catalysis, photovoltaics, supercapacitors), and promising biomedicine, are systematically highlighted. Finally, we envisage the key issues to be challenged, future research directions, and perspectives to show a full picture of CDs-based materials.

Fluorescence in "Nonfluorescent" Polymers

Recently, a great deal of research has been started on generating fairly strong photoluminescence from organic molecules without having any conjugated π-system or fluorophore. Discrete chromophores or auxochromophores termed as "subfluorophores" may undergo "space conjugation" via co-operative intramolecular conformation followed by intermolecular aggregation to generate fluorescence or sometimes phosphorescence emission. Polymeric materials are important in this regard as nonconjugated polymers self-assemble/aggregate in a moderately concentrated solution and also in the solid state, producing membranes, films, and so forth with good physical and mechanical properties. Therefore, promoting fluorescence in these commodity polymers is very much useful for sensing, organic light emitting diodes (OLED), and biological applications. In this perspective, we have discussed the aggregation-induced emission from four different types of architectures, for example, (i) dendrimers or hyperbranched polymers, (ii) entrapped polymeric micellar self-assembly, (iii) cluster formation, and (iv) stretching-induced aggregation, begining with the genesis of fluorescence from aggregation of propeller-shaped small organic molecules. The mechanism of induced fluorescence of polymers with subfluorophoric groups is also discussed from the theoretical calculations of the energy bands in the aggregated state. Also, an attempt has been made to highlight some useful applications in the sensing of surfactants, bacteria, cell imaging, drug delivery, gene delivery, OLED, and so forth.

One-pot synthesis of fluorescent non-conjugated polymer dots for Fe3+ detection and temperature sensing

The facile preparation of highly fluorescent polymer dots (PDs) still attracts substantial interest. Here, temperature/Fe³⁺ dual-responsive PDs are synthesized under mild conditions via the amidation reaction and self-assembly between hyperbranched polyethyleneimine and 5-aminosalicylic acid. The prepared PDs display strong green fluorescence with quantum yield of 15.5% and 53.3% in water and dimethylsulfoxide, respectively. The PDs also possess unique features, including excellent solubility, solvent polarity-dependent emission, remarkable photostability, as well as good salt-tolerance. Interestingly, the fluorescence intensity of PDs exhibits a reversible and sensitive response to temperature within 20-65 °C, which renders the PDs useful as a thermometer probe. Importantly, Fe³⁺ ion has the specific coordination ability toward the surface groups of PDs, leading to the aggregation and fluorescence quenching of PDs. Thus, the PDs are employed as a fluorescence probe for sensitive detecting Fe³⁺. The fluorescent intensity linearly decreases with increasing Fe³⁺ from 2 to 60 μM. Besides, Fe³⁺ concentration in river water samples is successfully assayed with this developed probe. The non-conjugated PDs with facile preparation, sensitive response to temperature and Fe³⁺ may hold potential applications in environmental monitoring.

Acetone-derived luminescent polymer dots: a facile and low-cost synthesis leads to remarkable photophysical properties

Carbon-based dots have been attracting much attention as potentially superior alternatives to more conventional semiconductor nanoparticles, due to their fascinating optical properties, chemical and photochemical stability, unique environmental-friendliness, and the versatility of fabrication routes. Many commercial materials and organic compounds have been considered so far as carbon precursors but in many cases the fabrication required high-temperature conditions or led to inhomogeneous final products. Here we report on a simple low-cost synthesis of non-conjugated carbon-rich polymer dots (PDs) that uses acetone as carbon precursor. Both hydrophilic and hydrophobic fractions of PDs were obtained, with the respective average diameters of 2–4 nm and ca. 6 nm. The as-obtained PDs reveal greenish-blue photoluminescence (PL) and high quantum yields (∼5–7%) and complex kinetics of the decays with the average lifetime of ∼3.5 ns. Such luminescent acetone-derived PDs may find application in several fields, including sensing and bioimaging.

Acetone-derived polymer dots (PDs) have been fabricated, according to a base-mediated synthesis route at room temperature. As-obtained hydrophobic and hydrophilic PDs revealed a strong greenish-blue emission due to the crosslink-enhanced effect.

Carbonized Polymer Dots with Tunable Room-Temperature Phosphorescence Lifetime and Wavelength

Recently, the room-temperature phosphorescence (RTP) properties of carbon dots (CDs) have attracted significant interest. However, the regulation of RTP emission faces great challenges because of untunable emissive lifetime and wavelength. Here, ultrahigh-yield acrylamide-based N-doped carbonized polymer dots (AN-CPDs) with ultralong RTP lifetime are synthesized by a one-step hydrothermal addition polymerization and carbonization strategy. The RTP lifetime and wavelength of the proposed AN-CPDs can be regulated by changing the carbonization degree. Thus, the AN-CPDs' RTP lifetimes are in the range of 61.4-466.5 ms, while the RTP emission wavelengths vary from 485 to 558 nm. Further experiment and theoretical calculation proved that RTP can be attributed to the polymer/carbon hybrid structure and nitrous functional groups as the molecular state related emission centers. Supramolecular cross-linking in the aggregated state is vital for the RTP emission of the AN-CPDs by restricting the nonradiative transition of the triplet excitons. AN-CPDs of different RTP lifetimes can be applied to time-resolved multistage information encryption and multistage anticounterfeiting. This work facilitates the optical regulation and application potential of CDs and provides profound insights into the effect of the polymer/carbon hybrid structure on the properties of CDs.

Multifunctional Binding Strategy on Nonconjugated Polymer Nanoparticles for Ratiometric Detection and Effective Removal of Mercury Ions

Developing a multifunctional platform for the selective detection and effective removal of toxic ions is a major challenge when addressing heavy metal contamination in environmental science. Herein, novel nonconjugated polymer nanoparticles (PNPs) called mercaptosuccinic acid-thiosemicarbazide PNPs (MT-PNPs) with appealing fluorescence and stability are synthesized via facile one-step hydrothermal treatment for attractive sensing and simultaneous removal of mercury(II). Interestingly, aggregation-induced fluorescence switch-off and scattering enhancement are found upon the addition of Hg²⁺, rendering MT-PNPs as a ratiometric sensor for selective and accurate Hg²⁺ monitoring. A wide linear range (0.1-1471 μM) and a low detection limit (95 nM) are obtained. This dual-signal opposite responses triggered by Hg²⁺ originate from the formation of MT-PNP-Hg²⁺ congeries via the multisite binding between S,N,O-containing groups of MT-PNPs and mercury. Meanwhile, target-induced aggregation renders an effective Hg²⁺ separation from contaminative aqueous media by MT-PNPs, which exhibits a satisfactory absorption efficiency of 90.42% within 50 min. Upon the simple Na₂S treatment, the MT-PNPs can be regenerated and reused. This work thus delivers an applicable method for the ratiometric detection and effective removal of mercury with the novel nonconjugated PNPs, offering potential in tackling the problem of heavy metal ion pollution for environmental monitoring and remediation.

Recent Advances in Energy Conversion Applications of Carbon Dots: From Optoelectronic Devices to Electrocatalysis

Exploitation and utilization of sustainable energy sources has increasingly become the common theme of global social development, which has promoted tremendous development of energy conversion devices/technologies. Owing to excellent and unique optical/electrical properties, carbon dots (CDs) have attracted extensive research interest for numerous energy conversion applications. Strong absorption, downconversion photoluminescence, electron acceptor/donor characteristics, and excellent electron conductivity endow CDs with enormous potential for applications in optoelectronic devices. Furthermore, excellent electron transfers/transport capacities and easily manipulable structural defects of CDs offer distinct advantages for electrocatalytic applications. Recent advances in CD-based energy conversion applications, including optoelectronic devices such as light-emitting diodes and solar cells, and electrocatalytic reactions including the hydrogen evolution reaction, oxygen evolution reaction, oxygen reduction reaction, and carbon dioxide reduction reaction, are summarized. Finally, current challenges and future prospects for CD-based energy conversion applications are proposed, highlighting the importance of controllable structural design and modifications.

Mineralized Soft and Elastic Polymer Dot Hydrogel for a Flexible Self-Powered Electronic Skin Sensor

We propose an integrated, self-powered, flexible electronic skin device containing an alginate-derived polymer dot (A-PD)-incorporated mineralized hydrogel-based energy storage unit and a chitosan-derived n-type carbon dot (N-CD)-based solar cell for an energy-harvesting unit. This study demonstrates a unique architecture of mineralized hydrogel comprising A-PD-incorporated poly(acrylic acid) (PAA)/CaCO₃/laponite containing soft and sensitive layers, deposited with a polyaniline electrode to serve as an energy storage unit. The self-assembly was achieved through the ionic cross-linking between A-PD and PAA driven by the mineralization process, resulting in excellent dimensional stability and improved mechanical properties of the hydrogel. The sp² carbon-rich A-PD enhances the electrochemical performance and the overall photon-to-electrical conversion and storage efficiency for self-powered devices by the formation of the bridge of electrons between the ionized polymer and metal ion. The capacitive sensor developed in this study exhibits high sensitivity in detecting small pressure changes, such as the falling of small water droplets. The self-powered sensing device can detect and monitor various human motions continuously by harvesting light energy from outdoor sunlight. Furthermore, the energy-autonomous device exhibits unique responses for handwriting characters stably and repeatedly. The proposed system may be applicable to human-machine interfaces, biomonitoring systems, secure communication, and wearable devices.

Bottom-Up Synthesized MoS2 Interfacing Polymer Carbon Nanodots with Electrocatalytic Activity for Hydrogen Evolution

The preparation of an MoS₂ -polymer carbon nanodot (MoS₂ -PCND) hybrid material was accomplished by employing an easy and fast bottom-up synthetic approach. Specifically, MoS₂ -PCND was realized by the thermal decomposition of ammonium tetrathiomolybdate and the in situ complexation of Mo with carboxylic acid units present on the surface of PCNDs. The newly prepared hybrid material was comprehensively characterized by spectroscopy, thermal means, and electron microscopy. The electrocatalytic activity of MoS₂ -PCND was examined in the hydrogen evolution reaction (HER) and compared with that of the corresponding hybrid material prepared by a top-down approach, namely MoS₂ -PCND(exf-fun), in which MoS₂ was firstly exfoliated and then covalently functionalized with PCNDs. The MoS₂ -PCND hybrid material showed superior electrocatalytic activity toward the HER with low Tafel slope, excellent electrocatalytic stability, and an onset potential of -0.16 V versus RHE. The superior catalytic performance of MoS₂ -PCND was rationalized by considering the catalytically active sites of MoS₂ , the effective charge/energy-transfer phenomena from PCNDs to MoS₂ , and the synergetic effect between MoS₂ and PCNDs in the hybrid material.

Visible-Light-Excited Room Temperature Phosphorescent Carbon Dots

Carbon dots (CDs) with a room temperature phosphorescent (RTP) feature have attracted considerable interest in recent years due to their fundamental importance and promising applications. However, the reported matrix-free RTP CDs only show short-wavelength (green to yellow) emissions and have to be triggered by ultraviolet (UV) light (below 400 nm), limiting their applications in certain fields. Herein, visible-light-excited matrix-free RTP CDs (named AA-CDs) with a long-wavelength (orange) emission are reported for the first time. The AA-CDs can be facilely prepared via a microwave heating treatment of L-aspartic acid (AA) in the presence of ammonia and they emit unique orange RTP in the solid state with visible light (420 nm) excitation just being switched off. Through the studies of the carbonization process, the C=O and C=N containing moieties in the AA-CDs are confirmed to be responsible for the observed RTP emission. Finally, the applications of AA-CDs in information encryption and anti-counterfeiting were preliminarily demonstrated.