Co9S8@MoS2 Core-Shell Heterostructures as Trifunctional Electrocatalysts for Overall Water Splitting and Zn-Air Batteries

Snowflake Cu2S@ZIF-67: A novel heterostructure substrate for enhanced adsorption and sensitive detection in BPA

Developing semiconductor substrates with superior stability and sensitivity is challenging in surface-enhanced Raman scattering (SERS) research. Here, a snowflake Cu2S@ZIF-67 heterostructure was fabricated using a straightforward method, exhibiting a notable enhancement factor of 9.0 × 109 and a limit of detection (LOD) of 10-14 M for methylene blue (MB). In addition, the Cu2S@ZIF-67 heterostructure substrate demonstrates outstanding homogeneity (relative standard deviation (RSD) = 9.2%) and stability (120 days). Employing Cu2S generates highly sensitive hotspots via an electromagnetic (EM) mechanism, and the growth of ZIF-67 on its surface augments the adsorption capacity and charge transfer capability (chemical mechanism, CM), thereby enhancing the SERS detection sensitivity. Furthermore, the Cu2S@ZIF-67 heterostructure, which was used as a SERS substrate, facilitated the detection of bisphenol A (BPA) with an LOD of 10-11 M. The Cu2S@ZIF-67 heterostructure substrate has excellent selectivity and anti-interference, which is very suitable for BPA detection in complex environment applications. The accuracy of the Cu2S@ZIF-67 heterostructure as a SERS substrate for detecting BPA in real water samples (water bottles, tap water, and pure milk) was confirmed by comparison with high-performance liquid chromatography (HPLC). These results demonstrate that through the rational design of heterostructures can achieve the quantitative and accurate detection of hazardous substances in food and the environment can be achieved.

Advancements in Rechargeable Zn-Air Batteries with Transition-Metal Dichalcogenides as Bifunctional Electrocatalyst

This review covers recent progress on transition metal dichalcogenides (TMDs) as bifunctional electrocatalysts for Zinc-air batteries (ZABs), emphasizing their suitable surface area, electrocatalytic active sites, stability in acidic/basic environments, and tunable electronic properties. It discusses strategies like defect engineering, doping, interface, and structural modifications of TMDs nanostructures for enhancing the performances of ZABs. Zinc-air batteries are promising energy storage devices owing to their high energy density, low cost, and environmental friendliness. However, the development of durable and efficient bifunctional electrocatalysts is a major concern for Zn-air batteries. In this review, we summarize the recent progress on transition metal dichalcogenides (TMDs) as bifunctional electrocatalysts for Zn-air batteries. We discuss the advantages of TMDs, such as high activity, good stability, and tunable electronic structure, as well as the challenges, such as low conductivity, poor durability, and limited active sites. We also highlight the strategies for fine-tuning the properties of TMDs, such as defect engineering, doping, hybridization, and structural engineering, to enhance their catalytic performance and stability. We provide a comprehensive and in-depth analysis of the applications of TMDs in Zn-air batteries, demonstrating their potential as low-cost, abundant, and environmentally friendly alternatives to noble metal catalysts. We also suggest future directions like exploring new TMDs materials and compositions, developing novel synthesis and modification techniques, investigating the interfacial interactions and charge transfer processes, and integrating TMDs with other functional materials. This review aims to illuminate the path forward for the development of efficient and durable Zn-air batteries, aligning with the broader objectives of sustainable energy solutions.

Metal-organic framework derived transition metal sulfides grown on carbon nanofibers as self-supported catalysts for hydrogen evolution reaction

Metal-organic framework (MOF) derived transition metal-based electrocatalysts have received great attention as substitutes for noble metal-based hydrogen evolution catalysts. However, the low conductivity and easy detachments from electrodes of raw MOF have seriously hindered their applications in hydrogen evolution reaction. Herein, we report the facile preparation of Co-NSC@CBC84, a porous carbon-based and self-supported catalyst containing Co9S8 active species, by pyrolysis and sulfidation of in-situ grown ZIF-67 on polydopamine-modified biomass bacterial cellulose (PDA/BC). As a binder-free and self-supported electrocatalyst, Co-NSC@CBC84 exhibits superior electrocatalytic properties to other reported cobalt-based sulfide catalytic materials and has good stability in 0.5 M H2SO4 electrolyte. At the current density of 10 mA cm-2, only an overpotential of 138 mV was required, corresponding to a Tafel slope of 123 mV dec-1, owing to the strong synergy effect between Co-NSC nanoparticles and CBC substrate. This work therefore provides a feasible approach to prepare self-supported transition metal sulfides as HER catalysts, which is helpful for the development of noble metal-free catalysts and biomass carbon materials.

Stabilizing Sulfur Sites in Tetraoxygen Tetrahedral Coordination Structure for Efficient Electrochemical Water Oxidation

Ion regulation strategy is regarded as a promising pathway for designing transition metal oxide-based electrocatalysts for oxygen evolution reaction (OER) with improved activity and stability. Precise anion conditioning can accurately change the anionic environment so that the acid radical ions (SO4 2- , PO3 2- , SeO4 2- , etc.), regardless of their state (inside the catalyst, on the catalyst surface, or in the electrolyte), can optimize the electronic structure of the cationic active site and further increase the catalytic activity. Herein, we report a new approach to encapsulate S atoms at the tetrahedral sites of the NaCl-type oxide NiO to form a tetraoxo-tetrahedral coordination structure (S-O4 ) inside the NiO (S-NiO -I). Density functional theory (DFT) calculations and operando vibrational spectroscopy proves that this kind of unique structure could achieve the S-O4 and Ni-S stable structure in S-NiO-I. Combining mass spectroscopy characterization, it could be confirmed that the S-O4 structure is the key factor for triggering the lattice oxygen exchange to participate in the OER process. This work demonstrates that the formation of tetraoxygen tetrahedral structure is a generalized key for boosting the OER performances of transition metal oxides.

Intrinsic Specific Activity Enhancement for Bifunctional Electrocatalytic Activity toward Oxygen and Hydrogen Evolution Reactions via Structural Modification of Nickel Organophosphonates

A comprehensive knowledge of the structure-activity relationship of the framework material is decisive to develop efficient multifunctional electrocatalysts. In this regard, two different metal organophosphonate compounds, [Ni(Hhedp)2]·4H2O (I) and [Ni3(H3hedp)2(C4H4N2)3]·6H2O (II) have been isolated through one-pot hydrothermal strategy by using H4hedp (1-hydroxyethane 1,1-diphosphonic acid) and N-donor auxiliary ligand (pyrazine; C4H4N2). The structures of synthesized materials have been established through single-crystal X-ray diffraction studies, which confirm that compound I formed a one-dimensional molecular chain structure, while compound II exhibited a three-dimensional extended structure. Further, the crystalline materials have participated as efficient electrocatalysts for the oxygen evolution and hydrogen evolution reactions (OER and HER) as compared to the state-of-the-art electrocatalyst RuO2. The electrocatalytic OER and HER performances show that compound II displayed better electrocatalytic performances toward OER (η10 = 305 mV) and HER (η10 = 230 mV) in alkaline (1 M KOH) and acidic (0.5 M H2SO4) media, respectively. Substantially, the specific activity has been assessed in order to measure the inherent electrocatalytic activity of the title electrocatalyst, which displays an enrichment of fourfold higher activity of compound II (0.64 mA/cm2) than compound I (0.16 mA/cm2) for the OER experiments. Remarkably, inclusion of an auxiliary pyrazine ligand into the metal organophosphonate structure (compound II) not only offers higher dimensionality along with significant enhancement of the overall bifunctional electrocatalytic performances but also improves the long-term stability, which is noteworthy for the family of hybrid framework materials.

Modulation of Phase Transition in Cobalt Selenide with Simultaneous Construction of Heterojunctions for Highly-Efficient Oxygen Electrocatalysis in Zinc-Air Battery

Phase transformation of cobalt selenide (CoSe2 ) can effectively modulate its intrinsic electrocatalytic activity. However, enhancing electroconductivity and catalytic activity/stability of CoSe2 still remains challenging. Heterostructure engineering may be feasible to optimize interfacial properties to promote the kinetics of oxygen electrocatalysis on a CoSe2 -based catalyst. Herein, a heterostructure consisting of CoSe2 and cobalt nitride (CoN) embedded in a hollow carbon cage is designed via a simultaneous phase/interface engineering strategy. Notably, the phase transition of orthorhombic-CoSe2 to cubic-CoSe2 (c-CoSe2 ) accompanied by in situ CoN formation is realized to build the c-CoSe2 /CoN heterointerface, which exhibits excellent/highly stable activities for oxygen reduction/evolution reactions (ORR/OER). Notably, heterostructure can modulate the local coordination environment and increase Co-Se/N bond lengths. Theoretical calculations show that Co-site (c-CoSe2 ) with an electronic state near Fermi energy level is the main active site for ORR/OER.Energetical tailoring of the d-orbital electronic structure of the Co atom of c-CoSe2 in heterostructure by in situ CoN incorporation lowers thermodynamic barriers for ORR/OER. Attractively, a zinc-air battery with a c-CoSe2 -CoN cathode displays excellent cycling stability (250 h) and charge/discharge voltage loss (0.953/0.96 V). It highlights that heterointerface engineering provides an option for modulating the bifunctional activity of metal selenides with controlled phase transformation.

Engineering Double Sulfur-Vacancy in CoS1.097@MoS2 Core-Shell Heterojunctions for Hydrogen Evolution in a Wide pH Range

Heterostructured nanomaterials have arisen as electrocatalysts with great potential for hydrogen evolution reaction (HER), considering their superiority in integrating different active components but are plagued by their insufficient active site density in a wide pH range. In this report, double sulfur-vacancy-decorated CoS1.097@MoS2 core-shell heterojunctions are designed, which contain a primary structure of hollow CoS1.097 nanocubes and a secondary structure of ultrathin MoS2 nanosheets. Taking advantage of the core-shell type heterointerfaces and double sulfur-vacancy, the CoS1.097@MoS2 catalyst exhibits pH-universal HER performance, achieving the overpotentials at 10 mA cm-2 of 190, 139, and 220 mV in 0.5 M H2SO4, 1.0 M KOH, and 1.0 M PBS, respectively. Systematic theoretical results show that the double sulfur-vacancy can endow the CoS1.097@MoS2 core-shell heterojunctions with promoted electron/mass transfer and enhanced reactive kinetics, thus boosting HER performance. This work clearly demonstrates an indispensable role of double sulfur-vacancy in enhancing the electrocatalytic HER performance of core-shell type heterojunctions under a wide pH operating condition.

Recent advances in defect-engineered molybdenum sulfides for catalytic applications

Electrochemical energy conversion and storage driven by renewable energy sources is drawing ever-increasing interest owing to the needs of sustainable development. Progress in the related electrochemical reactions relies on highly active and cost-effective catalysts to accelerate the sluggish kinetics. A substantial number of catalysts have been exploited recently, thanks to the advances in materials science and engineering. In particular, molybdenum sulfide (MoSx) furnishes a classic platform for studying catalytic mechanisms, improving catalytic performance and developing novel catalytic reactions. Herein, the recent theoretical and experimental progress of defective MoSx for catalytic applications is reviewed. This article begins with a brief description of the structure and basic catalytic applications of MoS2. The employment of defective two-dimensional and non-two-dimensional MoSx catalysts in the hydrogen evolution reaction (HER) is then reviewed, with a focus on the combination of theoretical and experimental tools for the rational design of defects and understanding of the reaction mechanisms. Afterward, the applications of defective MoSx as catalysts for the N2 reduction reaction, the CO2 reduction reaction, metal-sulfur batteries, metal-oxygen/air batteries, and the industrial hydrodesulfurization reaction are discussed, with a special emphasis on the synergy of multiple defects in achieving performance breakthroughs. Finally, the perspectives on the challenges and opportunities of defective MoSx for catalysis are presented.

Lignin-based nitrogen/sulfur dual-doped nanosheets decorated with Co1-xS nanoparticles as efficient bifunctional oxygen electrocatalysts

The development of efficient, cost-effective, bifunctional cathode catalyst materials to replace precious metals is highly attractive for the fabrication of Zn-air battery. Here, the three-dimensional N and S co-doped carbon nanosheets loaded with cobalt sulfide nanoparticles (Co_1-xS@SNFC) for bifunctional oxygen electrocatalysis were synthesized with Co(NO₃)₂·6H₂O as the Co source, lignin as the carbon source, thiourea as the nitrogen/ sulfur source, and MgO as the template. The synergistic effect of multiple active sites gives the Co_1-xS@SNFC fast electrochemical kinetic properties and excellent stability to oxygen reduction reactions (ORR) and oxygen evolution reactions (OER). The half-wave potential and overpotential of Co_1-xS@SNFC were 0.84 mV and 306 mV, respectively, which is closed to commercial noble metal catalysts. In addition, Co_1-xS@SNFC exhibited four-electron transfer characteristics and ultra-low tafel slope. Compared with commercial Pt/C, the Zn-air battery assembled from Co_1-xS@SNFC exhibited a low voltage gap of polarization curve (0.75 V) between charging and discharge and high power density (207 mWcm^-2) in alkaline electrolyte. This work developed a green and novel fabrication approach for the synthesis of bifunctional electrocatalyst and provides a new idea for high-value utilization of biomass.

Synergistic Transition-Metal Selenide Heterostructure as a High-Performance Cathode for Rechargeable Aluminum Batteries

We synthesize and characterize a rechargeable aluminum battery cathode material composed of heterostructured Co₃Se₄/ZnSe embedded in a hollow carbon matrix. This heterostructure is synthesized from a metal-organic framework composite, in which ZIF-8 is grown on the surface of ZIF-67 cube. Both experimental and theoretical studies indicate that the internal electric field across the heterostructure interface between Co₃Se₄ and ZnSe promotes the fast transport of electron and Al-ion diffusion. As a result, the heterostructured Co₃Se₄/ZnSe demonstrates superior specific capacity and cycle stability compared to the single-phase Co₃Se₄ and ZnSe cathode materials.

Low-dimensional transition metal sulfide-based electrocatalysts for water electrolysis: overview and perspectives

Hydrogen prepared by electrocatalytic decomposition of water ("green hydrogen") has the advantages of high energy density and being clean and pollution-free, which is an important energy carrier to face the problems of the energy crisis and environmental pollution. However, the most used commercial electrocatalysts are based on expensive and scarce precious metals and their alloy materials, which seriously restricts the large-scale industrial application of hydrogen energy. The development of efficient non-precious metal electrocatalysts is the key to achieving the sustainable development of the hydrogen energy industry. Transition metal sulfides (TMS) have become popular non-precious metal electrocatalysts with great application potential due to their large specific surface area, unique electronic structure, and rich regulatory strategies. To further improve their catalytic activities for practical application, many methods have been tried in recent years, including control of morphology and crystal plane, metal/nonmetal doping, vacancy engineering, building of self-supporting electrocatalysts, interface engineering, etc. In this review, we introduce firstly the common types of TMS and their preparation. Additionally, we summarize the recent developments of the many different strategies mentioned above for efficient water electrolysis applications. Furthermore, the rationales behind their enhanced electrochemical performances are discussed. Lastly, the challenges and future perspectives are briefly discussed for TMS-based water dissociation catalysts.

A Stable Rechargeable Aqueous Zn-Air Battery Enabled by Heterogeneous MoS2 Cathode Catalysts

Aqueous rechargeable zinc (Zn)−air batteries have recently attracted extensive research interest due to their low cost, environmental benignity, safety, and high energy density. However, the sluggish kinetics of oxygen (O2) evolution reaction (OER) and the oxygen reduction reaction (ORR) of cathode catalysts in the batteries result in the high over-potential that impedes the practical application of Zn−air batteries. Here, we report a stable rechargeable aqueous Zn−air battery by use of a heterogeneous two-dimensional molybdenum sulfide (2D MoS2) cathode catalyst that consists of a heterogeneous interface and defects-embedded active edge sites. Compared to commercial Pt/C-RuO2, the low cost MoS2 cathode catalyst shows decent oxygen evolution and acceptable oxygen reduction catalytic activity. The assembled aqueous Zn−air battery using hybrid MoS2 catalysts demonstrates a specific capacity of 330 mAh g−1 and a durability of 500 cycles (~180 h) at 0.5 mA cm−2. In particular, the hybrid MoS2 catalysts outperform commercial Pt/C in the practically meaningful high-current region (>5 mA cm−2). This work paves the way for research on improving the performance of aqueous Zn−air batteries by constructing their own heterogeneous surfaces or interfaces instead of constructing bifunctional catalysts by compounding other materials.

Synergizing Hydrogen Spillover and Deprotonation by the Internal Polarization Field in a MoS2 /NiPS3 Vertical Heterostructure for Boosted Water Electrolysis

Hydrogen spillover (HSo) has emerged to upgrade the hydrogen evolution reaction (HER) activity of Pt-support electrocatalysts, but it is not applicable to the deprotonated oxygen evolution reaction (OER). Non-precious catalysts that can perform well in both HSo and deprotonation (DeP) are extremely desirable for a sustainable hydrogen economy. Herein, an affordable MoS₂ /NiPS₃ vertical heterostructure catalyst is presented to synergize HSo and DeP for efficient water electrolysis. The internal polarization field (IPF) is clarified as the driving force of HSo in HER electrocatalysis. The HSo from the MoS₂ edge to NiPS₃ can activate the NiPS₃ basal plane to boost the HER activity of the MoS₂ /NiPS₃ heterostructure (112 mV vs reversible hydrogen electrode (RHE) at 10 mA cm^-2 ), while for OER, the IPF in the heterostructure can facilitate the hydroxyl diffusion and render MoS₂ -to-NiPS₃ /P-to-S dual-pathways for DeP. As a result, the stacking of OER-inactive MoS₂ on the NiPS₃ surface still brings intriguing OER enhancements. With them serving as electrode couples, the overall water splitting is attested stably with a cell voltage of 1.64 V at 10 mA cm^-2 . This research puts forward the IPF as the criterion in the rational design of HSo/DeP-unified non-precious catalysts for efficient water electrolysis.

Recent advances in the metal-organic framework-based electrocatalysts for trifunctional electrocatalysis

The sustainable energy technology is in great demand due to the depletion and the risks associated with the use of fossil fuels. Various energy technologies like regenerative fuel cells, zinc-air batteries, and overall water-splitting devices have a huge scope in the growth of green energy. The efficiency of these devices is reliant upon the multifunctional electrocatalysts, which include both bifunctional and trifunctional electrocatalysts. Among the different categories of the materials used for such multifunctional electrocatalysis, metal-organic-frameworks (MOFs) occupy a very consolidated place because of their high surface area, porosity, and many other unique physicochemical properties. However, the use of MOFs for the trifunctional electrocatalytic applications is in the budding phase and needs to be explored more. Further, most of these MOF-based trifunctional electrocatalysts are derived by pyrolyzing MOFs at high temperatures. Therefore, there is a need to develop more conductive MOFs which can be directly utilized for the trifunctional applications. In this frontier article, we present the latest reports on the MOF-based materials for trifunctional applications. The material design strategies of the MOF-based materials for trifunctional electrocatalysis have been discussed. The progressive improvements made with MOFs in electrocatalytic applications have been provided with emphasis on the structural, active site and compositional requirements. Finally, the challenges and viewpoints on the future development of the MOF-based materials for trifunctional electrocatalysis have been provided.

Self-supporting nanoporous CoMoP electrocatalyst for hydrogen evolution reaction in alkaline solution

Efficient catalysts with low costs are very important for hydrogen production. In this work, a nanoporous CoMoP (np-CoMoP) bimetallic phosphide catalyst with a self-supporting structure was prepared by the electrochemical dealloying method. The introduction of Mo tuned the electronic structures around Co and P, optimized the desorption of the H atom, and improved the catalytic activity of cobalt phosphide. The prepared nanoporous Co₆₅Mo₁₅P₂₀ (np-Co₆₅Mo₁₅P₂₀) structures promoted electron transfer and provided more active sites, exhibiting superior hydrogen evolution reaction (HER) performance with the overpotential of 40.8 mV at 10 mA cm^-2 and Tafel slope of 46.2 mV dec^-1 in alkaline solution. Also, the catalysts exhibited good long-term stability.

Superhydrophilic/Superaerophobic Hierarchical NiP2@MoO2/Co(Ni)MoO4 Core-Shell Array Electrocatalysts for Efficient Hydrogen Production at Large Current Densities

Rationally constructing low-cost, high-efficiency, and durable electrocatalysts toward the hydrogen evolution reaction at large current densities is imperative for water splitting, especially for large-scale industrial applications. Herein, a hierarchical core-shell NiP₂@MoO₂/Co(Ni)MoO₄ cuboid array electrode with superhydrophilic/superaerophobic properties is successfully fabricated and the formation mechanism of the core-shell structure is systematically investigated. Through an in situ partially converted gas-solid reaction during the phosphating process, Ni and Co elements are leached and rearranged to form NiP₂ particles and amorphous CoO as the shell layer and the inner undecomposed Co(Ni)MoO₄ crystals serve as the core layer. Because of its seamless core-shell structure and superhydrophilicity/superaerophobicity of hierarchical cuboid arrays, NiP₂@MoO₂/Co(Ni)MoO₄ exhibits superior HER activity in 1 M KOH with only an overpotential of 297 mV to deliver 1000 mA cm^-2 and can work steadily for 650 h at 200 mA cm^-2. Remarkably, when coupled with NiFe LDH for overall water splitting, it can drive an AA battery with an ultralow cell voltage of 1.49 V to deliver 10 mA cm^-2. This work sheds new light on designing large-current-density efficient HER electrocatalysts for large-scale industrial applications.

Direct Synthesis of Stable 1T-MoS2 Doped with Ni Single Atoms for Water Splitting in Alkaline Media

Metallic MoS₂ (i.e., 1T-MoS₂ ) is considered as the most promising precious-metal-free electrocatalyst with outstanding hydrogen evolution reaction (HER) performance in acidic media comparable to Pt. However, sluggish kinematics of HER in alkaline media and its inability for the oxygen evolution reaction (OER), hamper its development as bifunctional catalysts. The instability of 1T-MoS₂ further impedes its applications for scaling up, calling an urgent need for simple synthesis to produce stable 1T-MoS₂ . In this work, the challenge of 1T-MoS₂ synthesis is first addressed using a direct one-step hydrothermal method by adopting ascorbic acid. 1T-MoS₂ with flower-like morphology is obtained, and transition metals (Ni, Co, Fe) are simultaneously doped into 1T-MoS₂ . Ni-1T-MoS₂ achieves an enhanced bifunctional catalytic activity for both HER and OER in alkaline media, where the key role of Ni doping as single atom is proved to be essential for boosting HER/OER activity. Finally, a Ni-1T-MoS₂ ||Ni-1T-MoS₂ electrolyzer is fabricated, reaching a current density of 10 mA cm^-2 at an applied cell voltage of only 1.54 V for overall water splitting.

Bifunctional P-Intercalated and Doped Metallic (1T)-Copper Molybdenum Sulfide Ultrathin 2D-Nanosheets with Enlarged Interlayers for Efficient Overall Water Splitting

Metallic (1T) molybdenum disulfide (MoS₂) is a much better electrocatalyst than the semiconducting (2H) MoS₂ because of its superior conductivity, presence of active basal planes, and bulky interlayers. However, the lack of thermodynamic stability has hindered its practical uses. The insertion of transition metals and nonmetals in the interlayers and the crystal is known to improve both the thermodynamic stability and the catalytic efficacy of 1T-MoS₂. In this study, for the first time we have developed an electrocatalyst for water splitting based on metallic copper molybdenum sulfide (1T-CMS). The present catalyst, P-doped and intercalated 1T-CMS ultrathin 2D nanosheets on carbon cloth (P-1T-CMS@CC), demonstrates excellent catalytic efficacy for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). It required an overpotential of 95 mV for HER and of 284 mV for OER at a current density of 10 mA cm^-2. The P-1T-CMS@CC(+ -) device also shows excellent performance, requiring a cell voltage of only 1.51 V at a current density of 10 mA cm^-2.

CoFeS2@CoS2 Nanocubes Entangled with CNT for Efficient Bifunctional Performance for Oxygen Evolution and Oxygen Reduction Reactions

Exploring bifunctional electrocatalysts to lower the activation energy barriers for sluggish electrochemical reactions for both the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are of great importance in achieving lower energy consumption and higher conversion efficiency for future energy conversion and storage system. Despite the excellent performance of precious metal-based electrocatalysts for OER and ORR, their high cost and scarcity hamper their large-scale industrial application. As alternatives to precious metal-based electrocatalysts, the development of earth-abundant and efficient catalysts with excellent electrocatalytic performance in both the OER and the ORR is urgently required. Herein, we report a core–shell CoFeS₂@CoS₂ heterostructure entangled with carbon nanotubes as an efficient bifunctional electrocatalyst for both the OER and the ORR. The CoFeS₂@CoS₂ nanocubes entangled with carbon nanotubes show superior electrochemical performance for both the OER and the ORR: a potential of 1.5 V (vs. RHE) at a current density of 10 mA cm⁻² for the OER in alkaline medium and an onset potential of 0.976 V for the ORR. This work suggests a processing methodology for the development of the core–shell heterostructures with enhanced bifunctional performance for both the OER and the ORR.

Process of metal-organic framework (MOF)/covalent-organic framework (COF) hybrids-based derivatives and their applications on energy transfer and storage

The fossil-fuel shortage and severe environmental issues have posed ever-increasing demands on clean and renewable energy sources, for which the exploration of electrocatalysts has been a big challenge toward energy transfer and storage. Some indispensable features of electrocatalysts, such as large surface area, controlled structure, high porosity, and effective functionalization, have been proved to be critical for the improvement of electrocatalytic activities. Recently, the rapid expansion of metal-organic frameworks (MOFs), covalent-organic frameworks (COFs), and porous-organic polymers has provided extensive opportunities for the development of various electrocatalysts. Moreover, combining diverse descriptions of porous-organic frameworks (such as MOFs and COFs) can generate amazing and fantastic properties, affording the formed MOF/COF (including core-shell MOF@MOF and MOF@COF and layer-on-layer MOF-on-MOF or COF-on-MOF) heterostructures wide applications in diverse fields, especially in clean energy and energy transfer. To further boosts electronic conductivity, catalytic performances, and energy storage abilities, these MOF/COF hybrid materials have been widely utilized as versatile precursors for the manufacture of transition metal catalysts embedded within mesoporous carbon nitrides (M@CN_x) and porous carbon nitride frameworks (CN_x) via a facile pyrolysis process. Given that these M@CN_x and CN_x hybrids are composed of abundant catalytic centers, rich functionalities, and large specific surface areas, vast applications in energy transfer and energy storage fields can be realized. In this mini-review, we summarize the preparation strategies of MOF/COF-based hybrids, as well as their derivatives, nanostructure formation mechanism of M@CN_x and CN_x hybrids from MOF/COF-based hybrid materials, and their applications as catalysts for driving diverse reactions and electrode materials for energy storage. Further, current challenges and future prospects of applying these derivatives into energy conversion and storage devices are also discussed.

Fe and Cu dual-doped Ni3S4 nanoarrays with less low-valence Ni species for boosting water oxidation reaction

Transition metal materials with high efficiency and durable electrocatalytic water splitting activity have attracted widespread attention among scientists. In this work, two cation co-doped Ni₃S₄ nanoarrays grown on a Ni foam support were firstly synthesized through a typical two step hydrothermal process. Cu and Fe co-doping can regulate the internal electron configuration of the material, thus reducing the activation energy of the active species. Moreover, density functional theory calculations demonstrate that a low Ni²⁺ amount improves the adsorption energy of H₂O, which facilitates the formation and reaction of intermediate species in the water splitting process. The experimental results indicate that the Cu and Fe co-doped Ni₃S₄ material has superior electrochemical activity for water oxidation reaction to pure Ni₃S₄, Fe doped Ni₃S₄ and Cu doped Ni₃S₄. The Fe-Cu-Ni₃S₄ material displays a significantly enhanced electrocatalytic performance with low overpotentials of 230 mV at 50 mA cm^-2 and 260 mV at 100 mA cm^-2 for the oxygen evolution reaction under alkaline conditions. It's worth noting that when Fe-Cu-Ni₃S₄ was used as the anode and cathode, a small cell voltage of 1.59 V at 10 mA cm^-2 was obtained to achieve stable overall water splitting. Our work will afford a novel view and guidance for the preparation and application of efficient and environmentally friendly water splitting catalysts.

Recent Advances in Nanoscale Based Electrocatalysts for Metal-Air Battery, Fuel Cell and Water-Splitting Applications: An Overview

Metal-air batteries and fuel cells are considered the most promising highly efficient energy storage systems because they possess long life cycles, high carbon monoxide (CO) tolerance, and low fuel crossover ability. The use of energy storage technology in the transport segment holds great promise for producing green and clean energy with lesser greenhouse gas (GHG) emissions. In recent years, nanoscale based electrocatalysts have shown remarkable electrocatalytic performance towards the construction of sustainable energy-related devices/applications, including fuel cells, metal-air battery and water-splitting processes. This review summarises the recent advancement in the development of nanoscale-based electrocatalysts and their energy-related electrocatalytic applications. Further, we focus on different synthetic approaches employed to fabricate the nanomaterial catalysts and also their size, shape and morphological related electrocatalytic performances. Following this, we discuss the catalytic reaction mechanism of the electrochemical energy generation process, which provides close insight to develop a more efficient catalyst. Moreover, we outline the future perspectives and challenges pertaining to the development of highly efficient nanoscale-based electrocatalysts for green energy storage technology.

Shining Light on Anion-Mixed Nanocatalysts for Efficient Water Electrolysis: Fundamentals, Progress, and Perspectives

This review introduces recent advances of various anion-mixed transition metal compounds (e.g., nitrides, halides, phosphides, chalcogenides, (oxy)hydroxides, and borides) for efficient water electrolysis applications in detail. The challenges and future perspectives are proposed and analyzed for the anion-mixed water dissociation catalysts, including polyanion-mixed and metal-free catalyst, progressive synthesis strategies, advanced in situ characterizations, and atomic level structure-activity relationship. Hydrogen with high energy density and zero carbon emission is widely acknowledged as the most promising candidate toward world's carbon neutrality and future sustainable eco-society. Water-splitting is a constructive technology for unpolluted and high-purity H₂ production, and a series of non-precious electrocatalysts have been developed over the past decade. To further improve the catalytic activities, metal doping is always adopted to modulate the 3d-electronic configuration and electron-donating/accepting (e-DA) properties, while for anion doping, the electronegativity variations among different non-metal elements would also bring some potential in the modulations of e-DA and metal valence for tuning the performances. In this review, we summarize the recent developments of the many different anion-mixed transition metal compounds (e.g., nitrides, halides, phosphides, chalcogenides, oxyhydroxides, and borides/borates) for efficient water electrolysis applications. First, we have introduced the general information of water-splitting and the description of anion-mixed electrocatalysts and highlighted their complementary functions of mixed anions. Furthermore, some latest advances of anion-mixed compounds are also categorized for hydrogen and oxygen evolution electrocatalysis. The rationales behind their enhanced electrochemical performances are discussed. Last but not least, the challenges and future perspectives are briefly proposed for the anion-mixed water dissociation catalysts.

Flower-like Co3Ni1B nanosheets based on reduced graphene oxide (rGO) as an efficient electrocatalyst for the oxygen evolution reaction

Flower-like Co3Ni1B nanosheets based on a reduced graphene oxide electrocatalyst exhibit a better OER performance than commercial RuO2.

Microflower-like Co9S8@MoS2 heterostructure as an efficient bifunctional catalyst for overall water splitting

The development of a distinguished and high-performance catalyst for H₂ and O₂ generation is a rational strategy for producing hydrogen fuel via electrochemical water splitting. Herein, a flower-like Co₉S₈@MoS₂ heterostructure with effective bifunctional activity was achieved using a one-pot approach via the hydrothermal treatment of metal-coordinated species followed by pyrolysis under an N₂ atmosphere. The heterostructures exhibited a 3D interconnected network with a large electrochemical active surface area and a junctional complex with hydrogen evolution reaction (HER) catalytic activity of MoS₂ and oxygen evolution reaction (OER) catalytic activity of Co₉S₈, exhibiting low overpotentials of 295 and 103 mV for OER and HER at 10 mA cm⁻² current density, respectively. Additionally, the catalyst-assembled electrolyser provided favourable catalytic activity and strong durability for overall water splitting in 1 M KOH electrolyte. The results of the study highlight the importance of structural engineering for the design and preparation of cost-effective and efficient bifunctional electrocatalysts.

A flower-like Co₉S₈@MoS₂ heterostructure was prepared as efficient bifunctional electrocatalyst for overall water splitting by a sample one-pot approach.

Cu/Co/CoS2 embedded in S,N doped carbon as highly-efficient oxygen reduction and evolution electrocatalyst for rechargeable zinc-air batteries

In order to improve the retarded oxygen reduction and evolution reaction (ORR/OER) in rechargeable metal-air cells in electrochemical energy conversion systems, constructing multiphase nanostructured catalysts is an alternative strategy, where...

Double shelled hollow CoS2@MoS2@NiS2 polyhedron as advanced trifunctional electrocatalyst for zinc-air battery and self-powered overall water splitting

Electrocatalysts play important role in various energy conversion and storage devices. The catalytic performance of electrocatalysts can be enhanced through the increasement of intrinsic catalytic activity by optimizing electronic structure and the improvement of exposed active sites by designing proper nanostructures. In this work, CoS₂@MoS₂@NiS₂ nano polyhedron with double-shelled structure was prepared using metal organic framework as a precursor. Due to the rational integration of multifunctional active center, the strong electronic interaction of the various component, the high electrochemical surface area and shortened mass transport induced by the special structure, CoS₂@MoS₂@NiS₂ exhibits high catalytic activity for hydrogen evolution reaction (HER), oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Specifically, low overpotentials of 156 and 200 mV was achieved to deliver a current density of 10 mA cm^-2 for HER and OER, and a high half-wave potential of 0.80 V was observed for ORR. More importantly, the Zn-air battery assembled by CoS₂@MoS₂@NiS₂ exhibits a high-power density of 80.28 mW cm^-2 and could effectively drive overall water splitting. This work provides a new platform for designing multifunctional catalysts with high activity for energy conversion and storage.

Interfacial Structural and Electronic Regulation of MoS2 for Promoting Its Kinetics and Activity of Alkaline Hydrogen Evolution

The alkaline hydrogen evolution reaction (HER) of MoS2 is hampered by its sluggish water dissociation kinetics as well as limited edge sites. Herein, Ni3S2/MoS2 is fabricated as a model catalyst to highlight interfacial structural and electronic modulations of MoS2 for realizing its high performance in the alkaline HER. Experiments and density functional theory results demonstrate that the coupled Ni3S2 species can not only promote the adsorption and dissociation of H2O to boost the alkaline HER kinetics but also tailor the inert plane of MoS2 to create abundant unsaturated edge-like active sites, while the interfacial electron interaction can regulate the band gaps and Gibbs free energy of hydrogen adsorption of MoS2 to improve the electron conductivity as well as HER activity. Moreover, field emission scanning electron microscopy, transmission electron microscopy, Raman, ex situ synchrotron radiation X-ray absorption, and X-ray photoelectron spectroscopy results reveal the excellent structural stability of Ni3S2/MoS2 during the HER. As expected, the target Ni3S2/MoS2 achieves an ultralow overpotential of 68 mV at 10 mA cm-2, a fast alkaline HER kinetics, and remarkable durability. The proposed concept of interfacial structural and electronic reorganization could be extended to develop other functional materials.

Integrating a metal framework with Co-confined carbon nanotubes as trifunctional electrocatalysts to boost electron and mass transfer approaching practical applications

A facile and large-scale construction of robust and inexpensive trifunctional self-supporting electrodes for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in metal-air batteries and water splitting is crucial but remains challenging. Herein, we report a direct and up-scalable all-solid-phase strategy for the synthesis of a porous three-dimensional electrode consisting of cobalt nanoparticles wrapped in nitrogen-doped carbon tubes (Co/N-CNTs), which are in situ planted onto the surface of a cobalt foam. The resultant Co/N-CNTs can directly serve as a self-supporting and adhesive-free electrode with excellent and durable catalytic performances for the ORR, OER and HER. The metal framework substrate with an open-pore architecture is favorable for electron and mass transfer and allows fast catalytic kinetics. More importantly, when used in Zn-air batteries and overall water splitting, the as-prepared Co/N-CNT electrode displays a remarkable performance, implying bright perspects for practical application.

Constructing NiSe2@MoS2 nano-heterostructures on a carbon fiber paper for electrocatalytic oxygen evolution

Although MoS2 has shown its potential as an electro-catalyst for the oxygen evolution reaction (OER), its research is still insufficient. In this study, as a novel MoS2-based heterostructure electro-catalyst for OER, namely NiSe2@MoS2 nano-heterostructure, was constructed on a carbon fiber paper (CFP) substrate by a simple approach, which includes electrochemical deposition of NiSe2 film and hydrothermal processing of MoS2 film. In addition to a series of observations on the material structure, electrocatalytic OER performance of NiSe2@MoS2 was fully evaluated and further compared with other MoS2-based OER electro-catalysts. It exhibits an outstanding catalytic performance with an overpotential η 10 of 267 mV and a Tafel slope of 85 mV dec-1. Only 6% loss of current density before and after 10 h indicates its excellent durability. The results indicate that the obtained NiSe2@MoS2 is an excellent OER electro-catalyst and worth exploring as a substitute for noble metal-based materials.

ZnS-SnS@NC Heterostructure as Robust Lithiophilicity and Sulfiphilicity Mediator toward High-Rate and Long-Life Lithium-Sulfur Batteries

Lithium-sulfur (Li-S) batteries are severely hindered by the low sulfur utilization and short cycling life, especially at high rates. One of the effective solutions to address these problems is to improve the sulfiphilicity of lithium polysulfides (LiPSs) and the lithiophilicity of the lithium anode. However, it is a great challenge to simultaneously optimize both aspects. Herein, by incorporating the merits of strong absorbability and high conductivity of SnS with good catalytic capability of ZnS, a ZnS-SnS heterojunction coated with a polydopamine-derived N-doped carbon shell (denoted as ZnS-SnS@NC) with uniform cubic morphology was obtained and compared with the ZnS-SnS₂@NC heterostructure and its single-component counterparts (SnS@NC and SnS₂@NC). Theoretical calculations, ex situ XANES, and in situ Raman spectrum were utilized to elucidate rapid anchoring-diffusion-transformation of LiPSs, inhibition of the shuttling effect, and improvement of the sulfur electrochemistry of bimetal ZnS-SnS heterostructure at the molecular level. When applied as a modification layer coated on the separator, the ZnS-SnS@NC-based cell with optimized lithiophilicity and sulfiphilicity enables desirable sulfur electrochemistry, including high reversibility of 1149 mAh g^-1 for 300 cycles at 0.2 C, high rate performance of 661 mAh g^-1 at 10 C, and long cycle life with a low fading rate of 0.0126% each cycle after 2000 cycles at 4 C. Furthermore, a favorable areal capacity of 8.27 mAh cm^-2 is maintained under high sulfur mass loading of 10.3 mg cm^-2. This work furnishes a feasible scheme to the rational design of bimetal sulfides heterostructures and boosts the development of other electrochemical applications.

Nanocrystalline NiSe2/MoS2 heterostructures for electrochemical hydrogen evolution reaction

Although it suffers from a heavy dependence on the noble platinum catalyst, the electrochemical hydrogen evolution reaction (HER) is one of the most promising methods for the production of hydrogen. After numerous efforts, it is found that MoS₂-based heterostructure may replace platinum as the electrochemical HER catalyst. In this work, the nanocrystalline NiSe₂/MoS₂ heterostructures were successfully prepared on the carbon fiber paper (CFP) substrate through electrochemical deposition and hydrothermal process. According to a series of electrochemical HER tests and a comparison with other MoS₂-based heterostructure catalysts, the CFP/NiSe₂/MoS₂ catalyst with an overpotential η ₁₀ of 143 mV and a Tafel slope of 45 mV dec^-1 exhibited an excellent electrochemical HER catalytic performance and durability. In addition, CFP/NiSe₂/MoS₂ catalyst was treated by plasma to further improve the catalytic performance of the catalyst.

One-dimensional, space-confined, solid-phase growth of the Cu9S5@MoS2 core-shell heterostructure for electrocatalytic hydrogen evolution

Binary transition metal chalcogenide core-shell nanocrystals are considered the most promising nonprecious metal catalysts for large-scale industrial hydrogen production. Herein, we report a one-dimensional, space-confined, solid-phase strategy for the growth of a Cu₉S₅@MoS₂ core-shell heterostructure by combining electrospinning and chemical vapor deposition methods. The Cu₉S₅@MoS₂ core-shell nanocrystals were synthesized in situ on carbon nanofibers (Cu₉S₅@MoS₂/CNFs) by an S vapor graphitization process. Tuning of the MoS₂ shell numbers can be controlled by changing the mass ratio of the Cu and Mo precursors. We experimentally determined the effects of the thickness of the MoS₂ shell on the electrocatalytic activity for the hydrogen evolution reaction (HER) in acidic and alkaline solutions. When the mass ratio is 3:1, the Cu₉S₅@MoS₂/CNFs show the fewest MoS₂ shells with just 1-2 layers each and exhibit the best HER performance with small overpotentials of 116 mV and 114 mV in acidic and alkaline solutions, respectively, at a current density of 10 mA cm^-2. The core shell structures, with their unique Cu-S-Mo nanointerfaces, could enhance the electron transfer and surface area, thus increasing the performance of the HER. This work provides a facile method to design unique core shell assemblies in one-dimensional nanostructures.

TiO2 as a Photocatalyst for Water Splitting-An Experimental and Theoretical Review

Hydrogen produced from water using photocatalysts driven by sunlight is a sustainable way to overcome the intermittency issues of solar power and provide a green alternative to fossil fuels. TiO₂ has been used as a photocatalyst since the 1970s due to its low cost, earth abundance, and stability. There has been a wide range of research activities in order to enhance the use of TiO₂ as a photocatalyst using dopants, modifying the surface, or depositing noble metals. However, the issues such as wide bandgap, high electron-hole recombination time, and a large overpotential for the hydrogen evolution reaction (HER) persist as a challenge. Here, we review state-of-the-art experimental and theoretical research on TiO₂ based photocatalysts and identify challenges that have to be focused on to drive the field further. We conclude with a discussion of four challenges for TiO₂ photocatalysts-non-standardized presentation of results, bandgap in the ultraviolet (UV) region, lack of collaboration between experimental and theoretical work, and lack of large/small scale production facilities. We also highlight the importance of combining computational modeling with experimental work to make further advances in this exciting field.