White Light-Emitting Multistimuli-Responsive Hydrogels with Lanthanides and Carbon Dots

Human Muscle Inspired Anisotropic and Dynamic Metal Ion-Coordinated Mechanically Robust, Stretchable and Swelling-Resistant Hydrogels for Underwater Motion Sensing and Flexible Supercapacitor Application

Mechanically robust and anisotropic conductive hydrogels have emerged as crucial components in the field of flexible electronic devices, since they possess high mechanical properties and intelligent sensing capabilities. However, the hydrogels often swell on exposure to aqueous medium because of their hydrophilicity, which compromises their mechanical properties. Additionally, the hydrogels' isotropic polymeric networks demonstrate isotropic ion transport, which significantly diminishes the sensing capabilities of electrical devices based on hydrogels. These factors greatly limit their use in flexible and wearable sensors. In this study, we have developed poly(acrylamide-co-maleic acid-co-butyl acrylate) based anisotropic hydrogels by prestretching and drying, followed by ionic cross-linking to fix the alignment. The anisotropic arrangement of the polymer network resulted in significant improvements in mechanical performance and electrical conductivity along the prestretching direction. This anisotropic hydrogel combines hydrophobic and metal ion-ligand interactions, enhancing the maximum tensile strength up to 11 MPa along the prestretching direction, about 3 times higher than in the perpendicular direction. The optimized 200% prestretched hydrogel exhibited high tensile strength (7 MPa), flexibility (fracture strain 370%), high toughness (16 MJ m-3) and antiswelling behavior in water (equilibrium swelling ratio 2% after 15 days). alongside higher conductivity (3 times higher) and strain sensing ability (4 times higher gauge factor) along the prestretching direction. The hydrogel demonstrated efficient and stable underwater sensing for underwater communication and to monitor human limb position and movement. The anisotropic hydrogel electrolyte-based flexible supercapacitor exhibited 117 Fg-1 specific capacitance at 0.5 Ag-1, and maximum energy density 5.85 Whkg-1, significantly higher than the corresponding values for the isotropic hydrogel-based device (88 F g-1 and 4.4 Whkg-1, respectively). This hydrogel mimics the structural design of unidirectionally oriented muscle fibers, showing better direction dependent functional properties than the corresponding isotropic hydrogel. The anti-swelling ability and retention of mechanical and conductive properties of these hydrogels in aqueous environment suggest long-term usage capability of these functional materials.

Fabrication of Luminescent Triple-Cross-Linked Gelatin/Alginate Hydrogels through Freezing-Drying-Swelling and Freezing-Thawing Processes

Lanthanide-containing luminescent hydrogels have shown potential for sensing and imaging applications. Nonetheless, integrating lanthanide ions or complexes into the polymer matrix often results in the poor stability and mechanical strength of the hydrogels. This work presents an innovative approach to fabricating luminescent hydrogels with three dynamic cross-links: imine bond, boronate ester bond, and metal-ligand coordination. Europium(III) (Eu3+) ions are incorporated into a dual-cross-linked matrix composed of phenylboronic acid-polyethylenimine-modified gelatin (PPG) and alginate dialdehyde (ADA) through a combined treatment involving freeze-drying-swelling (FDS) and freeze-thawing (FT) processes. The FDS process facilitates the formation of additional europium-carboxylate cross-links within the polymeric network to enhance its luminescence and stability, while the FT process strengthens the network physically. The impact of the FDS-FT cycle number on the microstructures and properties of PPG/ADA-Eu3+ hydrogels is thoroughly investigated, and their potential for monitoring bacterial growth and detecting copper(II) ions is also demonstrated.

Jellyfish-Inspired Self-Healing Luminescent Elastomers Based on Borate Nanoassemblies for Dual-Model Encryption

Responsive luminescent materials that reversibly react to external stimuli have emerged as prospective platforms for information encryption applications. Despite brilliant achievements, the existing fluorescent materials usually have low information density and experience inevitable information loss when subjected to mechanical damage. Here, inspired by the hierarchical nanostructure of fluorescent proteins in jellyfish, we propose a self-healable, photoresponsive luminescent elastomer based on dynamic interface-anchored borate nanoassemblies for smart dual-model encryption. The rigid cyclodextrin molecule restricts the movement of the guest fluorescent molecules, enabling long room-temperature phosphorescence (0.37 s) and excitation wavelength-responsive fluorescence. The building of reversible interfacial bonding between nanoassemblies and polymer matrix together with their nanoconfinement effect endows the nanocomposites with excellent mechanical performances (tensile strength of 15.8 MPa) and superior mechanical and functional recovery capacities after damage. Such supramolecular nanoassemblies with dynamic nanoconfinement and interfaces enable simultaneous material functionalization and self-healing, paving the way for the development of advanced functional materials.

Novel supramolecular luminescent metallogels containing Tb(iii) and Eu(iii) ions with benzene-1,3,5-tricarboxylic acid gelator: advancing semiconductor applications in microelectronic devices

A novel strategy was employed to create supramolecular metallogels incorporating Tb(iii) and Eu(iii) ions using benzene-1,3,5-tricarboxylic acid (TA) as a gelator in N,N-dimethylformamide (DMF). Rheological analysis demonstrated their mechanical robustness under varying stress levels and angular frequencies. FESEM imaging revealed a flake-like hierarchical network for Tb-TA and a rod-shaped architecture for Eu-TA. EDX analysis confirmed essential chemical constituents within the metallogels. FT-IR, PXRD, Raman spectroscopy, and thermogravimetric analysis assessed their gelation process and material properties, showing semiconducting characteristics, validated by optical band-gap measurements. Metal-semiconductor junction-based devices integrating Al metal with Tb(iii)- and Eu(iii)-metallogels exhibited non-linear charge transport akin to a Schottky diode, indicating potential for advanced electronic device development. Direct utilization of benzene-1,3,5-tricarboxylic acid and Tb(iii)/Eu(iii) sources underscores their suitability as semiconducting materials for device fabrication. This study explores the versatile applications of Tb-TA and Eu-TA metallogels, offering insights for material science researchers.

Luminescent lanthanide-containing gelatin/polydextran/laponite nanocomposite double-network hydrogels for processing and sensing applications

Lanthanide-containing nanomaterials have gained significant popularity for their utilization in polymeric networks, enabling the creation of luminescent nanocomposites for advanced applications. In this study, we developed a new type of lanthanide-containing nanocomposite hydrogels by incorporating terbium-containing laponite (Tb3+@Lap) into the networks of polyethyleneimine-modified gelatin/polydextran aldehyde (PG/PDA) through dynamic bonds. The structures and properties of the Tb3+@Lap-containing nanocomposite double-network (ncDN) hydrogels were comprehensively investigated in comparison with the DN hydrogels with a pure polymeric network and the Lap-containing ncDN hydrogels. The PG/PDA/Tb3+@Lap ncDN hydrogels with multiple dynamic bonds (i.e., imine bonds, coordination bonds, hydrogen bonds, and electrostatic interactions) exhibited remarkable characteristics of shear-thinning and self-healing, making them suitable for the construction of hydrogel scaffolds on a macroscale using fabrication techniques such as electrospinning and 3D printing. Moreover, the PG/PDA/Tb3+@Lap ncDN hydrogels have been demonstrated to act as sensitive and selective luminescent sensors for detecting copper ions. Taken together, a versatile lanthanide-containing ncDN hydrogel platform capable of dynamic features is developed for processing and sensing applications.

Hydrophobic Mn-Doped Solid-State Red-Emitting Carbon Nanodots with AIE Effect and Their Hydrogel Composites for Color-Changing Anticounterfeiting

The aggregation-caused quenching has always limited the high concentration and solid-state applications of carbon nanodots. While the aggregation-induced emission effect, dominated by intramolecular motion, may be an effective means to solve this problem. Here, hydrophobic solid-state red-light carbon nanodots (M-CDs) with 95% yield are synthesized by a one-step hydrothermal method using 2,2'-dithiodibenzoic acid as the carbon source and manganese acetate as the dopant source. The disulfide bond of 2,2'-dithiodibenzoic acid serves as the symmetry center of molecular rotation and Mn catalyzes the synthesis of M-CDs, which promotes the formation of the central graphitic carbon structure. The M-CDs/agar hydrogel composites can achieve fluorescence transition behavior because of the special fluorescence transition properties of M-CDs. When this composite hydrogel is placed in water, water molecules contact with M-CDs through the network structure of the hydrogels, making the aggregated hydrogels of M-CDs fluorescence orange-red under 365 nm excitation. While in dimethyl sulfoxide, water molecules in the hydrogels network are replaced and the M-CDs fluoresce blue when dispersed, providing a potential application in information encryption. In addition, high-performance monochromatic light-emitting diode (LED) devices are prepared by compounding M-CDs with epoxy resin and coating them on 365 nm LED chips.

Tunable Multicolor Lanthanide Supramolecular Assemblies with White Light Emission Confined by Cucurbituril[7]

Macrocyclic confinement-induced supramolecular luminescence materials have important application value in the fields of bio-sensing, cell imaging, and information anti-counterfeiting. Herein, a tunable multicolor lanthanide supramolecular assembly with white light emission is reported, which is constructed by co-assembly of cucurbit[7]uril (CB[7]) encapsulating naphthylimidazolium dicarboxylic acid (G1 )/Ln (Eu3+ /Tb3+ ) complex and carbon quantum dots (CD). Benefiting from the macrocyclic confinement effect of CB[7], the supramolecular assembly not only extends the fluorescence intensity of the lanthanide complex G1 /Tb3+ by 36 times, but also increases the quantum yield by 28 times and the fluorescence lifetime by 12 times. Furthermore, the CB[7]/G1 /Ln assembly can further co-assemble with CD and diarylethene derivatives (DAE) to realize the intelligently-regulated full-color spectrum including white light, which results from the competitive encapsulation of adamantylamine and CB[7], the change of pH, and photochromic DAE. The multi-level logic gate based on lanthanide supramolecular assembly is successfully applied in anti-counterfeiting system and information storage, providing an effective method for the research of new luminescent intelligent materials.

Fluorescent-Nanoparticle-Impregnated Nanocomposite Polymeric Gels for Biosensing and Drug Delivery Applications

Nanocomposite polymeric gels infused with fluorescent nanoparticles have surfaced as a propitious category of substances for biomedical purposes owing to their exceptional characteristics. The aforementioned materials possess a blend of desirable characteristics, including biocompatibility, biodegradability, drug encapsulation, controlled release capabilities, and optical properties that are conducive to imaging and tracking. This paper presents a comprehensive analysis of the synthesis and characterization of fluorescent-nanoparticle-impregnated nanocomposite polymeric gels, as well as their biomedical applications, such as drug delivery, imaging, and tissue engineering. In this discourse, we deliberate upon the merits and obstacles linked to these substances, encompassing biocompatibility, drug encapsulation, optical characteristics, and scalability. The present study aims to provide an overall evaluation of the potential of fluorescent-nanoparticle-impregnated nanocomposite polymeric gels for biomedical applications. Additionally, emerging trends and future directions for research in this area are highlighted.

Stimuli-bioresponsive hydrogels as new generation materials for implantable, wearable, and disposable biosensors for medical diagnostics: Principles, opportunities, and challenges

Hydrogels are excellent water-swollen polymeric materials for use in wearable, implantable, and disposable biosensors. Hydrogels have unique properties such as low cost, ease of preparation, transparency, rapid response to external conditions, biocompatibility and self-adhesion to the skin, flexibility, and strain sensitivity, making them ideal for use in biosensor platforms. This review provides a detailed overview of advanced applications of stimuli-responsive hydrogels in biosensor platforms, from hydrogel synthesis and functionalization for bioreceptor immobilization to several important diagnostic applications. Emphasis is placed on recent advances in the fabrication of ultrasensitive fluorescent and electrically conductive hydrogels and their applications in wearable, implantable, and disposable biosensors for quantitative measurements. Design, modification, and assembly techniques of fluorescent, ionically conductive, and electrically conductive hydrogels to improve performance will be addressed. The advantages and performance improvements of immobilizing bioreceptors (e.g., antibodies, enzymes, and aptamers), and incorporating fluorescent and electrically conductive nanomaterials are described, as are their limitations. Potential applications of hydrogels in implantable, wearable, disposable portable biosensors for quantitative detection of the various bioanalytes (ions, molecules, drugs, proteins, and biomarkers) are discussed. Finally, the global market for hydrogel-based biosensors and future challenges and prospects are discussed in detail.

Carbon Dot-Based Hydrogels: Preparations, Properties, and Applications

Hydrogels have extremely high moisture content, which makes it very soft and excellently biocompatible. They have become an important soft material and have a wide range of applications in various fields such as biomedicine, bionic smart material, and electrochemistry. Carbon dot (CD)-based hydrogels are based on carbon dots (CDs) and auxiliary substances, forming a gel material with comprehensive properties of individual components. CDs embedding in hydrogels could not only solve their aggregation-caused quenching (ACQ) effect, but also manipulate the properties of hydrogels and even bring some novel properties, achieving a win-win situation. In this review, the preparation methods, formation mechanism, and properties of CD-based hydrogels, and their applications in biomedicine, sensing, adsorption, energy storage, and catalysis -are summarized. Finally, a brief discussion on future research directions of CD-based hydrogels will be given.

Recent Progress in Self-Healable Hydrogel-Based Electroluminescent Devices: A Comprehensive Review

Flexible electronics have gained significant research attention in recent years due to their potential applications as smart and functional materials. Typically, electroluminescence devices produced by hydrogel-based materials are among the most notable flexible electronics. With their excellent flexibility and their remarkable electrical, adaptable mechanical and self-healing properties, functional hydrogels offer a wealth of insights and opportunities for the fabrication of electroluminescent devices that can be easily integrated into wearable electronics for various applications. Various strategies have been developed and adapted to obtain functional hydrogels, and at the same time, high-performance electroluminescent devices have been fabricated based on these functional hydrogels. This review provides a comprehensive overview of various functional hydrogels that have been used for the development of electroluminescent devices. It also highlights some challenges and future research prospects for hydrogel-based electroluminescent devices.

Naturally Derived Carbon Dots In Situ Confined Self-Healing and Breathable Hydrogel Monolith for Anomalous Diffusion-Driven Phytomedicine Release

Fluorescent nanocarbons are well-proficient nanomaterials because of their optical properties and surface engineering. Herein, Apium graveolens-derived carbon dots (ACDs) have been synthesized by a one-step hydrothermal process without using any surplus vigorous chemicals or ligands. ACDs were captured via an in situ gelation reaction to form a semi-interpenetrating polymer network system showing mechanical robustness, fluorescent behavior, and natural adhesivity. ACDs-reinforced hydrogels were tested against robust uniaxial stress, repeated mechanical stretching, thixotropy, low creep, and fast strain recovery, confirming their elastomeric sustainability. Moreover, the room-temperature self-healing behavior was observed for the ACDs-reinforced hydrogels, with a healing efficacy of more than 45%. Water imbibition through hydrogel surfaces was digitally monitored via "breathing" and "accelerated breathing" behaviors. The phytomedicine release from the hydrogels was tuned by the ACDs' microstructure regulatory activity, resulting in better control of the diffusion rate compared to conventional chemical hydrogels. Finally, the phytomedicine-loaded hydrogels were found to be excellent bactericidal materials eradicating more than 85% of Gram-positive and -negative bacteria. The delayed network rupturing, superstretchability, fluorescent self-healing, controlled release, and antibacterial behavior could make this material an excellent alternative to soft biomaterials and soft robotics.

Recent Progress in Smart Polymeric Gel-Based Information Storage for Anti-Counterfeiting

Information security protection has a tremendous impact on human life, social stability and national security, leading to the rapid development of anti-counterfeiting materials and related techniques. However, the traditional stored information on hard or dry media is often static and lacks functions, which makes it challenging to deal with increasing and powerful counterfeiting technologies. Modified intelligent polymeric gels exhibit color changes and shape morphing under external stimuli, which give them great potential for applications in information storage. This paper provides an overview of the latest progress in polymeric gel-based information storage materials in relation to counterfeiting. Following a brief introduction of anti-counterfeiting materials, the preparation methods for intelligent gels with adjustable colors (e.g., chemical colors and physical colors) and various encryption/decryption modes involving dimensions and diverse colors are outlined. Finally, the challenges and prospects for information storage and anti-counterfeiting based on smart gels are discussed.

Amino acid derivative-based Ln-metallohydrogels with multi-stimuli responsiveness and applications

Metallohydrogels and lanthanide (Ln) fluorescent materials have gained much attention recently. In this study, we designed and synthesized a facile gelator of a phenylalanine-based derivative containing an indazole group (namely IZF). It was found that IZF can self-assemble to form hydrogel at pH ≤ 7. Meanwhile, IZF and Tb³⁺/Eu³⁺ can co-assemble to generate IZF-Tb and IZF-Eu metallohydrogels with green and red fluorescence, respectively, at pH 8-11, with excellent multi-stimuli responsiveness. The bimetallic hydrogels of IZF-Tb/Eu exhibit different colors under UV light by adjusting the ratio of Tb³⁺ and Eu³⁺. Moreover, white light emission was achieved with IZF-Tb/Eu bimetallic gels through doping carbon dots (CDs) by tailoring the stoichiometric ratio of Ln-complex and CDs. Remarkably, IZF-Tb and IZF-Eu could be used as fluorescent inks with excellent stability. This study indicates that the amino acid derivative-based Ln-metallohydrogels are excellent candidates for constructing information storage and multiple anti-counterfeiting materials.

Multi-level encryption of information in morphing hydrogels with patterned fluorescence

Fluorescent hydrogels have attracted tremendous attention recently in the field of information security due to the booming development of information technology. Along this line, it is highly desired to improve the security level of concealed information by the advancements of materials and encryption technologies. Here we report multi-level encryption of information in a bilayer hydrogel with shape-morphing ability and patterned fluorescence. This hydrogel is composed of a fluorescence layer containing chromophore units in the poly(acrylic acid) network and an active layer with UV-absorption agents in the poly(N-isopropylacrylamide-co-acrylic acid) network. The former layer exhibits tunable fluorescence tailored by UV light irradiation to induce unimer-to-dimer transformation of the chromophores, facilitating the write-in of information through photolithography. The latter layer is responsive to temperature, enabling morphing of the bilayer hydrogel. Therefore, the bilayer hydrogel encoded with patterned fluorescent patterns can deform into three-dimensional configurations at room temperature to conceal the information, which is readable only after successive procedures of shape recovery at an appropriate temperature and under UV light irradiation from the right direction. The combination of morphing materials and patterned fluorescence as a new avenue to improve the encryption level of information should merit the design of other smart materials with integrated functions for specific applications.

Programmed Stimuli-Responsive Carbon Dot-Nanogel Hybrids for Imaging-Guided Enhanced Tumor Phototherapy

For harmonizing the contradiction of nanotheranostic agents between enhanced tumor accumulation and penetration, efficient cell internalization and fast elimination are key tactics for promoting their clinical applications. Herein, programmed stimuli-responsive poly(N-isopropylacrylamide)-carbon dot (PNIPAM-CD) hybrid nanogels are designed to address the abovementioned conflicts. The enlarged particle size of PNIPAM-CDs enables one to effectively improve their accumulation at tumor sites. Once the hybrid nanogels are docked in tumors and exposed to deep-red-light (660 nm) irradiation, heat and reactive oxygen species (ROS) are generated from the CDs, consequently activating photothermal therapy (PTT) and photodynamic therapy (PDT) effects and meanwhile inducing partial degradation of PNIPAM-CDs for deep tissue penetration. Further, enhanced cellular internalization of the functional components can be achieved owing to the pH-responsive charge reversal and temperature-dependent hydrophilic/hydrophobic conversion characteristics of PNIPAM-CDs. Finally, the overexpressed glutathione (GSH) in tumor cells would trigger further cleavage of the partially degraded hybrid nanogels, which is beneficial for their rapid clearance from the body. This work not only proposed a novel strategy to fabricate nanotheranostic agents using just a single functional component (i.e., the versatile CDs) to simplify the preparation process but also achieved effective delivery of agents into tumor cells by overcoming the multiple biological barriers to enhance therapeutic efficacy and decrease side effects.

Probing the emission dynamics in nitrogen doped carbon dots by reversible capping with mercury (II) through surface chemistry

In this study, the mechanistic insight and emission dynamics have been explored of size dependent nitrogen doped carbon quantum dots (namely 3A,3B & 3C) with toxic metal Hg2+ ions via...

Research progress of smart response composite hydrogels based on nanocellulose

In recent years, smart-responsive nanocellulose composite hydrogels have attracted extensive attention due to their unique porous substrate, hydrophilic properties, biocompatibility and stimulus responsiveness. At present, the research on smart response nanocellulose composite hydrogel mainly focuses on the selection of composite materials and the construction of internal chemical bonds. The common composite materials and connection methods used for preparation of smart response nanocellulose composite hydrogels are compared according to the different types of response sources such as temperature, pH and so on. The response mechanisms and the application prospects of different response types of nanocellulose composite hydrogels are summarized, and the transformation of internal ions, functional groups and chemical bonds, as well as the changes in mechanical properties such as modulus and strength are discussed. Finally, the shortcomings and application prospects of nanocellulose smart response composite hydrogels are summarized and prospected.

Carboxymethyl chitosan‒promoted luminescence of lanthanide metallogel and its application in assay of multiple metal ions

In this work, the luminescence of lanthanide supramolecular metallogel formed by the self-assembly of 5,5',5″-(1,3,5-triazine-2,4,6-triyl)tris(azanediyl)triisophthalate (H₆L) and Tb³⁺ was efficiently promoted by carboxymethyl chitosan (CMCS). The total quantum yield of the resultant metallogel (denoted as H₆L/Tb³⁺/CMCS gel) was 9 times higher than the gel without CMCS. The average lifetime of H₆L/Tb³⁺/CMCS gel increased from 0.51 ms to 1.20 ms. More importantly, the aqueous dispersion of H₆L/Tb³⁺/CMCS xerogels showed a stable and pH-dependent luminescence. Based on the selective affinity of CMCS to different metal ions as well as with the aid of principal component analysis, H₆L/Tb³⁺ /CMCS can be used as a sensor array to distinguish 11 metal ions (P < 0.05). This work provides a new strategy for the design and development of bio-based functional luminescent lanthanide supramolecular metallogels.

Carbon dots-releasing hydrogels with antibacterial activity, high biocompatibility, and fluorescence performance as candidate materials for wound healing

Antibacterial hydrogels have received attention for preventing infections and for their biomedical applications. However, traditional antibiotics-containing and metal nanoparticle-containing hydrogels often cause bacterial resistance, exhibit low biocompatibility, and lack real-time monitoring capability. Here, a fluorescent antibacterial hydrogel with antibacterial ability, excellent optical performance, and high biocompatibility was developed based on cationic carbon dots (CDs), pectin, and acrylic acid triggered construction of the hydrogel network by cross-linker. The antibacterial high-cationic CDs (+51.20 mV) were synthesized by a simple hydrothermal method and released from hydrogel in response to broken hydrogen bonds due to a change in the ambient environment caused by the growing bacteria. The hydrogel showed long-term potent broad-spectrum antibacterial ability (even drug-resistant bacteria) due to the bacterial membrane seriously damaged by the released CDs. The inhibitory capability of this hydrogel was 108.5-fold higher than the other hydrogel. After implantation or incubation with cells, no obvious cytotoxicity or tissue toxicity was observed for the antibacterial hydrogel. This hydrogel enhanced both the application of CDs in vivo and the biosafety of hydrogel. Furthermore, the multicolor fluorescence emission produced by CD provides a potential idea for the development of dual-function hydrogels with in situ monitoring and prevention of bacterial infections to treat wounds.

High-Performance Photochromic Hydrogels for Rewritable Information Record

Rewritable information record materials usually demand not only reversibly stimuli-responsive ability, but also strong mechanical properties. To achieve one photochromic hydrogel with super-strong mechanical strength, hydrophobic molecule spiropyran (SP) has been introduced into a copolymer based on ion-hybrid crosslink. The hydrogels exhibit both photoinduced reversible color changes and excellent mechanical properties, i.e., the tensile stress of 3.22 MPa, work of tension of 12.8 MJ m^-3 , and modulus of elasticity of 8.6 MPa. Moreover, the SP-based Ca²⁺ crosslinked hydrogels can be enhanced further when exposed to UV-light via ionic interaction coordination between Ca²⁺ , merocyanine (MC) with polar copolymer chain. In particular, hydrogels have excellent reversible conversion behavior, which can be used to realize repeatable writing of optical information. Thus, the novel design is demonstrated to support future applications in writing repeatable optical information, optical displays, information storage, artificial intelligence systems, and flexible wearable devices.

Carbon Dots: An Emerging Smart Material for Analytical Applications

Carbon dots (CDs) are optically active carbon-based nanomaterials. These nanomaterials can change their light emission properties in response to various external stimuli such as pH, temperature, pressure, and light. The CD's remarkable stimuli-responsive smart material properties have recently stimulated massive research interest for their exploitation to develop various sensor platforms. Herein, an effort has been made to review the major advances made on CDs, focusing mainly on its smart material attributes and linked applications. Since the CD's material properties are largely linked to their synthesis approaches, various synthesis methods, including surface passivation and functionalization of CDs and the mechanisms reported so far in their photophysical properties, are also delineated in this review. Finally, the challenges of using CDs and the scope for their further improvement as an optical signal transducer to expand their application horizon for developing analytical platforms have been discussed.

White-light emission from the quadruple-stranded dinuclear Eu(iii) helicate decorated with pendent tetraphenylethylene (TPE)

The hybrid film doped with a quadruple-stranded Eu³⁺ helicate displayed tuneable emission and white light.

Co-cross-linked lanthanide-containing nanocomposite luminescent hydrogels

We report a hydrogel with co-cross-linked networks synthesized via in situ polymerization of NIPA, LAPONITE® and lanthanide complex, endowing the hydrogel with thermoresponsive mechanical and luminescent performance.

A novel multichromic Zn(II) cationic coordination polymer based on a new flexible viologen ligand exhibiting aniline detection in the solid state

In this work, a novel multichromic cationic coordination polymer, named [Zn4(BTC)3(bcbpy)2]·5H2O (1), based on a new flexible viologen ligand 1,1'-bis(3-cyanobenzyl)-[4,4'-bipyridine]-1,1'-diium (H2bcbpy·2Cl), Zn(NO3)2·6H2O and pyromellitic acid (H4BTC) was synthesized. Compound 1 has good photosensitive activity and can respond to sunlight at room temperature. The colour of compound 1 changes rapidly in response to UV light and blue ray irradiation within 5 s. We rarely obtained the crystal structures after irradiation under UV light and blue ray. At the same time, compound 1 shows the hydrochromism phenomenon when heated at 120 °C, and it also shows the ability of detecting aniline and NO2- under low-concentration conditions (10-4 M).

Aqueous Systems with Tunable Fluorescence Including White-Light Emission for Anti-Counterfeiting Fluorescent Inks and Hydrogels

White-light-emitting materials have attracted wide interest for potential applications in information displays and lighting. To date, the majority of reported white-light-emitting materials have been multicomponent systems that are typically processed with organic solvents. These features are associated with complex processing, poor white-light quality, and environmental pollution. Herein, a white-light-emitting aqueous system is realized by encapsulating a fluorophore, which has a vibration-induced emission effect, in Pluronic F127 micelles. Tunable multicolor fluorescence is achieved by changing the temperature, and the use of organic solvents is effectively avoided. Through this process, white-light emission with Commission Internationale de l'Eclairage coordinates of (0.3351, 0.3326) is obtained, which is very close to pure white light, and its color rendering index is as high as 89. The fluorescence color tunability of this system could be performed in a wide temperature range, rendering it a potential material in optical thermometry. Besides, the aqueous system also allows for the application of the material as a fluorescent ink and white-light-emitting hydrogels. Information could be embedded in paper-based materials and hydrogels through the fluorescence quenching effect of iron ions (Fe³⁺) on the fluorophore. Fluorescence could then be recovered upon removal of Fe³⁺ by adenosine 5'-triphosphate. Thus, fluorescent patterning and triple-mode anti-counterfeiting could be expected due to the temperature-sensitive emission, fluorescence quenching, and recovering properties.

The Rapid and Large-Scale Production of Carbon Quantum Dots and their Integration with Polymers

Carbon quantum dots (CDs) have inspired vast interest because of their excellent photoluminescence (PL) performances and their promising applications in optoelectronic, biomedical, and sensing fields. The development of effective approaches for the large-scale production of CDs may greatly promote the further advancement of their practical applications. In this Minireview, the newly emerging methods for the large-scale production of CDs are summarized, such as microwave, ultrasonic, plasma, magnetic hyperthermia, and microfluidic techniques. The use of the available strategies for constructing CD/polymer composites with intriguing solid-state PL is then described. Particularly, the multiple roles of CDs are emphasized, including as fillers, monomers, and initiators. Moreover, typical applications of CD/polymer composites in light-emitting diodes, fluorescent printing, and biomedicine are outlined. Finally, we discuss current problems and speculate on their future development.

The synthesis of a chemically reactive and polymeric luminescent gel

In the past, chemically reactive polymeric interfaces have been considered to be of potential interest for developing functional materials for a wide range of practical applications. Furthermore, the rational incorporation of luminescence properties into such chemically reactive interfaces could provide a basis for extending the horizon of their prospective utility. In this report, a simple catalyst-free chemical approach is introduced to develop a chemically reactive and optically active polymeric gel. Branched-polyethyleneimine (BPEI)-derived, inherently luminescent carbon dots (BPEI-CDs) were covalently crosslinked with pentaacrylate (5Acl) through a 1,4-conjugate addition reaction under ambient conditions. The synthesized polymeric gel was milky white under visible light; however, it displayed fluorescence under UV light. Additionally, the residual acrylate groups in the synthesized fluorescent gel allowed its chemical functionality to be tailored through facile, robust 1,4-conjugate addition reactions with primary-amine-containing small molecules under ambient conditions. The chemical reactivity of the luminescent gel was further employed for a proof-of-concept demonstration of portable and parallel 'ON'/'OFF' toxic chemical sensing (namely, the sensing of nitrite ions as a model analyte). First, the chemically reactive luminescent gel derived from BPEI-CDs was covalently post-modified with aniline for the selective synthesis of a diazo compound in the presence of nitrite ions. During this process, the color of the gel under visible light changed from white to yellow and, thus, the colorimetric mode of the sensor was turned 'ON'. In parallel, the luminescence of the gel under UV light was quenched, which was denoted as the 'OFF' mode of the sensor. This parallel and unambiguous 'ON'/'OFF' sensing of a toxic chemical (nitrite ions, with a detection limit of 3 μM) was also achieved even in presence of other relevant interfering ions and at concentrations well below the permissible limit (65 μM) set by the World Health Organization (WHO). Furthermore, this chemically reactive luminescent gel could be of potential interest in a wide range of basic and applied contexts.

Stimulus-responsive luminescent hydrogels: Design and applications

Luminescent hydrogels are emerging soft materials with applications in photoelectric, biomedicine, sensors and actuators, which are fabricated via covalently conjugation of luminophors to hydrogelators or physical loading of luminescent organic/inorganic materials into hydrogel matrices. Due to the intrinsic stimulus-responsiveness for hydrogels such as thermo-, pH, ionic strength, light and redox, luminescent hydrogels could respond to external physical or chemical stimuli through varying the luminescent properties such as colors, fluorescent intensity and so on, affording diverse application potential in addition to the pristine individual hydrogels or luminescent materials. Based on the rapid development of such area, here we systematically summarize and discuss the design protocols, properties as well as the applications of stimulus-responsive luminescent hydrogels. Because of the stimuli-responsiveness, biocompatibility, injectable and controllability of luminescent hydrogels, they are widely used as functional smart materials. We illustrate the applications of luminescent hydrogels. The future developments about luminescent hydrogels are also presented.

Microwave-Synthesized Polysaccharide-Derived Carbon Dots as Therapeutic Cargoes and Toughening Agents for Elastomeric Gels

Fluorescent carbon dots (CDs) play a versatile role in materials science. Herein, we have developed alginate-derived nitrogen-doped CDs as a drug carrier and a toughening agent for hydrogels by a microwave-assisted method. In the first phase of work, we carried out covalent conjugation of the drug onto the CD surface for controlled delivery of drug molecules, and in the second phase of work, we demonstrated how CDs could act as a toughening agent as well as a viscosity modifier for poly(acrylic acid-co-methacrylamide) copolymer hydrogels. The hydrogels were evaluated by Fourier transformed infrared spectroscopy, X-ray photoelectron spectroscopy, and solid-state nuclear magnetic resonance. The hybrid hydrogels have been tested to be mechanically robust with extraordinary stretchability (∼1200% elongation at break), recoverable to the original position (low permanent set), tunable water uptake, and thixotropic character in dynamic stress. The crosslinked structure has been evaluated through void calculation revealing gradual densification of the network with increasing CD content. Exceptional gel strength (ratio of elastic modulus to loss modulus; G'/G″) has been achieved from analogous crosslinking made by CDs. The delayed network rupturing and superstretchability could make this material a good choice for soft biomaterials and soft robotics.

When rare earth meets carbon nanodots: mechanisms, applications and outlook

Rare earth (RE) elements are widely used in the luminescence and magnetic fields by virtue of their abundant 4f electron configurations. However, the overall performance and aqueous stability of single-component RE materials need to be urgently improved to satisfy the requirements for multifunctional applications. Carbon nanodots (CNDs) are excellent nanocarriers with abundant functional surface groups, excellent hydrophilicity, unique photoluminescence (PL) and tunable features. Accordingly, RE-CND hybrids combine the merits of both RE and CNDs, which dramatically enhance their overall properties such as luminescent and magnetic-optical imaging performances, leading to highly promising practical applications in the future. Nevertheless, a comprehensive review focusing on the introduction and in-depth understanding of RE-CND hybrid materials has not been reported to date. This review endeavors to summarize the recent advances of RE-CNDs, including their interaction mechanisms, general synthetic strategies and applications in fluorescence, biosensing and multi-modal biomedical imaging. Finally, we present the current challenges and the possible application perspectives of newly developed RE-CND materials. We hope this review will inspire new design ideas and valuable references in this promising field in the future.

Engineering luminescent pectin-based hydrogel for highly efficient multiple sensing

Luminescent hydrogels with sensing capabilities have attracted much interest in recent years, especially those responsive to stimuli, making such materials potential for various applications. Pectin is a high-molecular-weight carbohydrate polymer that has the ability to form hydrogel upon heating or mixing with divalent cations. However, intrinsic pectin gels are weak and lack of functionalities. In this study, lanthanide ions and silk fibroin derived carbon dots were incorporated into Pectin/PVA hydrogel (PPH) to form luminescent tough hydrogels. The luminescence of the hydrogel can be tuned by adjusting the ratio of blue emission carbon dots to Eu³⁺ ions (red emission) and Tb³⁺ ions (green emission). Such incorporation of emitters only slightly changed the mechanical properties of the tough hydrogel. Notably, the luminescent Pectin/PVA hydrogel (LPPH) showed chromic response to external stimuli, like pH and metal ions. By measuring the ratio of luminescent intensity at 473 nm and 617 nm (I₄₇₃/I₆₁₇), the pH response can be quantified in high sensitivity. In addition, the specific detection of Cu²⁺ and Fe³⁺ ions using the fabricated hydrogel were demonstrated, the mechanism was also proposed. The different chromic responses to Fe²⁺ and Fe³⁺ endow the luminescent tough Pectin/PVA hydrogel potential for multiple sensing applications.

A robust stimuli responsive Eu3+ - Metalo organic hydrogel and xerogel emitting white light

Recently, there is incredible growth on optoelectronic properties of new supramolecular gels and white-light-emitting (WLE) metalo-organic gel comprised with single lanthanide metal ion having stimuli-responsive property is not yet reported. Here, we report a mandelic acid (MA)-triethylene tetraamine (TETA)-Eu-acetate conjugate (4.5:1:0.4 mol ratio), producing stimuli-sensitive WLE hydrogel exhibiting thermoreversible, thixotropic, pH-switchable, self-standing and self-healing properties. Energy minimized structure suggests complexation between MA-TETA conjugate and Eu³⁺ ion. Fluorescence intensity of MA-TETA conjugate decreases with increasing Eu³⁺ concentration indicating energy transfer from MA-TETA to Eu³⁺. Decay of donor fluorescence intensity follows Stern-Volmer equation and energy transfer efficiency is 42%. WLE gel has Quantum yield 11.4% and Förster distance 1.7 Å. Hydrogel and xerogel show WLE on excitation at 330 and 350 nm having CIE coordinates (0.34, 0.33) and (0.28, 0.32), respectively. WLE gel has Correlated colour temperature 5148 K, appropriate for cool day light emission and on coating over UV-LED bulb it emits bright white light.

A versatile molecular logic system based on Eu(III) coordination polymer film electrodes combined with multiple properties of NADH

Herein, a new type of lanthanide coordination polymer film made up of europium (Eu(iii)) and poly(N-methacryloylglycine) (Eu(iii)-PMAG) was prepared on an ITO electrode surface driven by the coordination between N-methacryloylglycine (MAG) and Eu(iii) through a single-step polymerization process. The fluorescence signal of Eu(iii)-PMAG films at 617 nm originating from Eu(iii) could be well retained in the buffer solution but was regulated by the concentration of Cu(ii) and the complexing agent EDTA. The switching of fluorescence by Cu(ii) was attributed to the inhibition of the "antenna effect" between Eu(iii) and the MAG ligand in the films. The coexistence of reduced β-nicotinamide adenine dinucleotide (NADH) in the solution can apparently quench the fluorescence of Eu(iii)-PMAG films through the internal filtration effect of UV absorbance overlapping the excitation wavelength, but itself exhibiting a fluorescence emission at 468 nm. In addition, the electrocatalytic oxidation of NADH with the help of the ferrocenedicarboxylic acid (FcDA) probe demonstrated a cyclic voltammetry (CV) signal at 0.45 V (vs. SCE). Based on various reversible stimulus-responsive behaviours, a 4-input/10-output logic network was built using Cu(ii), EDTA, NADH and FcDA as inputs and the signals of fluorescence from Eu(iii)-PMAG (617 nm) and NADH (468 nm), the CV response from FcDA and the UV-vis absorbance from the Cu(ii)-EDTA complex as outputs. Meanwhile, 6 different functional logic devices were constructed based on the same versatile platform, including a 2-to-1 encoder, a 1-to-2 decoder, a 1-to-2 demultiplexer, a parity checker, a transfer gate and a reprogrammable 3-input/2-output keypad lock. Combined with the new type of lanthanide coordination polymer film, NADH played central roles in designing sophisticated computing systems with its fluorescence, UV and electrocatalytic properties. This work might provide a novel avenue to develop intelligent multi-analyte sensing and information processing at the molecular level based on one single platform.

White-light-emitting hydrogels with self-healing properties and adjustable emission colors

White-light-emitting soft materials with self-healing properties show extensive applications in many fields. Herein, a novel self-healing hydrogel is successfully fabricated using oxidized dextran (Odex) and dithiodipropionate dihydrazide (TPH). Carbon dots (CDs), Riboflavin (Ri) and Rhodamine B (RhB) are incorporated into the gel matrix to produce white light emission through fluorescence resonance energy transfer (FRET) process, thus achieving excellent Commission Internationale de L'eclairage (CIE) coordinate value of (0.30, 0.33). The emission colors can be easily tuned via changing proportions of three emitters or the excitation wavelength. When the hydrogels are coated on an ultraviolet light-emitting diodes (UV LED), the hydrogel coating converts UV light to white light and repairs itself in 20 h while a hole is dug from it. Thanks to reversible exchanging reactions of acylhydrazone and disulfide bonds in hydrogel networks, the hydrogel coating exhibits perfect self-healing property in a wide range of pH (from 5 to 9 except for 7). The excellent emission and self-healing properties of hydrogels have great value in practical applications.

Multi-Responsive Lanthanide-Based Hydrogel with Encryption, Naked Eye Sensing, Shape Memory, Self-Healing, and Antibacterial Activity

In this work, we reported a multi-responsive luminescent hydrogel with properties of encryption, naked eye sensing of glucose, shape memory, self-healing, and antibacterial activity. The hydrogel (GA/CCS/DNSA/Eu³⁺) was obtained by mixing phenylboronic acid-modified gelatin (GA-DBA), catechol-modified carboxymethyl chitosan (CCS-PCA), 3,5-dinitrosalicylic acid (DNSA), and Eu³⁺ ions through a facile heating-cooling process. The resultant hydrogel exhibits reversible luminescence and color and phase changes in response to temperature, acid/base, salt, and redox stimuli. Based on the multiple responsiveness, information encryption and decryption, naked eye sensing of glucose, remarkable shape memory, and enhanced mechanical properties of the as-prepared hydrogel were realized. In addition, the self-healing capacity was also achieved due to the dynamic bonds in GA/CCS/DNSA/Eu³⁺ hydrogels. Specifically, the GA/CCS/DNSA/Eu³⁺ hydrogels possess antibacterial activity owing to the bacteriostasis of the CCS-PCA and DNSA/Eu³⁺ complex. Thus, GA/CCS/DNSA/Eu³⁺ hydrogels have potential applications in the fields of anticounterfeiting, wearable devices, biomedicine, sensing, etc.

Tri(pyridinyl)pyridine Viologen-Based Kagome Dual Coordination Polymer with Selective Chromic Response to Soft X-ray and Volatile Organic Amines

The development of new responsive smart materials has been highly desirable in the recent decade due to growing demand in our daily life, and extended viologen-based coordination polymers are regarded as proper and promising candidates for stimuli-responsive study. A tri(pyridinyl)pyridine viologen-based Kagome dual (kgd) topological coordination polymer, [Mn₃Cl₄(tpptb)₂]·Cl₂·(H₂O)₂, (tpptb = N,N',N″-tri(3-carboxybenzyl)-2,4,6-tri(pyridinium-4-yl)pyridine; 1) has been solvothermally synthesized, which can selectively respond to soft X-ray Al-Kα (λ = 8.357 Å) irradiation but not to UV light and hard X-rays of λ < 1.5418 Å at room temperature. Appealingly, 1 is very sensitive and convenient for the visual detection of various volatile amine vapors, especially ethylamine vapors at a low concentration of 100 ppm, and the vapochromic sample can be recovered after exposure in the air at room temperature. The sequence of amines in vapochromism could be rationalized by combined consideration of vapor pressure, the molecular size, and electron-donor ability of various amine molecules as well as the void spaces of 1. In addition, 1 exhibits an obvious hydrochromic transformation upon heating in the air and an anhydrous atmosphere. Combined XPS and EPR confirmed that these physical and chemical stimuli can cause electron transfer from electron-rich groups to quaternary nitrogen atoms of the ligand to generate charge-separated radicals, leading to soft X-ray-induced photochromic and selective vapochromic behavior of 1. Such behavior indicates that it will become a convenient, recyclable, and practical multifunctional material for chemical and environmental sensing. These results provide an effective avenue for the rational design and synthesis of multifunctional chromic materials for potential use in sensing devices.

A facile synthesis of multifunctional carbon dots as fluorescence 'turn on' and 'turn off' probes for selective detection of Al3+ and 2,4,6-trinitrophenol

Carbon dots (CDs) have drawn increasing interests due to their unique optical properties and promising application in various fields. In this study, citric acid (CA) and 5-chloromethyl-8-hydroxyquinoline (LQ) were used to synthesize nitrogen-doped CDs as novel fluorescent probes using a one-step solvothermal route. The as-prepared CDs had strong blue-white fluorescence emission when excited at 405 nm wavelength with a quantum yield (QY) of 25%, behaving with high ion concentration stability. Water-soluble CDs with a 8-hydroxyquinoline structure on their surface could be used to detect Al³⁺ using a 'turn on' mechanism and trinitrophenol (TNP) using a 'turn off' mechanism with detection limits of 229 nM and 44.4 nM, respectively. Al³⁺ enhances the fluorescence of CDs by forming a coordination complex to generate a fluorescence synergistic role and limit CD nonradiative transition. TNP quenched the fluorescence with high selectivity and sensitivity, which was attributed to the inner filter effect and static quenching. These results indicated that these CDs with their unique 'turn on' and 'turn off' nature have potential application in the environmental protection field and in prevention of terrorist threats.

Multiresponsive White-Light Emitting Aerogel Prepared with Codoped Lanthanide/Thymidine/Carbon Dots

Aerogels hold great promise as a lightweight replacement in materials fields. Dynamic fluorochromic aerogels that possess reversible stimuli responsiveness have been particularly attractive recently for new design opportunities in practical solid-state lighting and wide applications in advanced sensors/probe. In this study, we report a reversibly multiresponsive white-light-emitting (WLE) aerogel prepared with codoped lanthanide, thymidine, and carbon dots. By precisely modulating the stoichiometric ratio of lanthanide complexes and carbon dots, broad-spectrum output from purple to red is obtained, including pure white light (CIE (0.33, 0.32)). The freeze-drying process contributes to the elimination of hydration between water molecules and lanthanide ions, further preventing the quenching of lanthanide luminescence and preserving the high quantum yield (47.4%) of our aerogel. Moreover, the dynamic coordination bond between lanthanide (europium and terbium) and thymidine endows the aerogel with reversible responsiveness upon five different stimuli, including halide anions, metal ions, pH, temperature, and humidity. We envision that our WLE aerogel has considerable potential for use in various fields such as display devices, advanced sensors, and environmentally friendly probes where multiresponsiveness is required.