Highly Stable Copper(I)-Based Metal-Organic Framework Assembled with Resorcin[4]arene and Polyoxometalate for Efficient Heterogeneous Catalysis of Azide-Alkyne "Click" Reaction

Copper Dispersed Covalent Organic Framework for Azide-Alkyne Cycloaddition and Fast Synthesis of Rufinamide in Water

A crystalline porous bipyridine-based Bpy-COF with a high BET surface area (1864 m2 g-1) and uniform mesopore (4.0 nm) is successfully synthesized from 1,3,5-tris-(4'-formyl-biphenyl-4-yl)triazine and 5,5'-diamino-2,2'-bipyridine via a solvothermal method. After Cu(I)-loading, the resultant Cu(I)-Bpy-COF remained the ordered porous structure with evenly distributed Cu(I) ions at a single-atom level. Using Cu(I)-Bpy-COF as a heterogeneous catalyst, high conversions for cycloaddition reactions are achieved within a short time (40 min) at 25 °C in water medium. Moreover, Cu(I)-Bpy-COF proves to be applicable for aromatic and aliphatic azides and alkynes bearing various substituents such as ester, hydroxyl, amido, pyridyl, thienyl, bulky triphenylamine, fluorine, and trifluoromethyl groups. The high conversions remain almost constant after five cycles. Additionally, the antiepileptic drug (rufinamide) is successfully prepared by a simple one-step reaction using Cu(I)-Bpy-COF, proving its practical feasibility for pharmaceutical synthesis.

Synthesis and characterization of a new copper-based polyoxomolybdate and its catalytic activity for azide-alkyne cycloaddition reaction under UV light irradiation

A new organic-functionalized Cu-based Anderson-type polyoxomolybdate, namely (C7H15N4)2[Na(H2O)4]2[C6H12CuMo6N2O24]·2(H2O) (CuII-POM), was synthesized via a simple one-pot reaction and subsequently characterized using a range of analytical and spectral techniques. Structural investigation by single crystal X-ray diffraction analysis revealed that the polyanion component of the synthesized compound (i.e. [C6H12CuMo6N2O24]4-) possesses a δ-isomer Anderson-type structure, which is surrounded by four lattice water molecules and four [C7H15N4-NaH15(H2O)8]4+ cations in the crystal packing arrangement. The resulting double-sided tris-functionalized Anderson-type compound can function as highly effective heterogeneous photocatalysts for the copper(I)-catalyzed Huisgen azide-alkyne cycloaddition (Cu-AAC) reaction of terminal alkyne, benzyl halides, and sodium azide (acts as the azidonation and reducing agent) in aqueous media. Ultraviolet light irradiation enhances the catalytic activity of CuII-POM ~ 4.4 times of the "off" situation under reaction conditions of 0.00239 mmol cat., 80 °C, 8 h, 2 mL H2O, So that the isolated yields for the AAC reaction involving a variety of terminal alkynes and benzyl halides using the CuII-POM catalyst ranged between 19-97%. The current study is the first report about using an efficient and economical Cu(II)-POM/UV/NaN3 catalytic system in the Cu-AAC reaction and reveals its significant potential for applying to other Cu(I)-catalyzed reactions.

Catalysis of a Diels-Alder Reaction between Azachalcones and Cyclopentadiene by a Recyclable Copper(II)-PEIP Metal-Organic Framework

Metal-organic frameworks (MOFs) have attracted considerable interest as emerging heterogeneous catalysts for organic transformations of synthetic utility. Herein, a Lewis-acidic MOF, {[Cu3(PEIP)2(5-NH2-mBDC)(DMF)]·7DMF}∞, denoted as Cu(ΙΙ)-PEIP, has been synthesized via a one-pot process and deployed as an efficient heterogeneous catalyst for a Diels-Alder cycloaddition. Specifically, the [4 + 2] cycloaddition of 13 substituted azachalcone dienophiles with cyclopentadiene has been investigated. MOF-catalyzed reaction conditions were optimized, leading to the selection of water as the solvent, in the presence of 10% mol sodium dodecyl sulfate (SDS) to address substrate solubility. The Cu(II)-PEIP catalyst showed excellent activity under these green and mild conditions, exhibiting comparable or, in some cases, superior efficiency to a homogeneous catalyst often employed in Diels-Alder reactions, namely, Cu(OTf)2. The nature of the azachalcone substituent played a significant role in the reactivity of the dienophiles, with electron-withdrawing (EW) substituents enhancing conversion and electron-donating (ED) ones exhibiting the opposite effect. Coordinating substituents appeared to enhance the endo selectivity. Importantly, the Cu(II)-PEIP catalyst can be readily isolated from the reaction mixture and recycled up to four times without any significant reduction in conversion or selectivity.

Copper-Based Metal–Organic Frameworks (MOFs) as an Emerging Catalytic Framework for Click Chemistry

In the extensive terrain of catalytic procedures for the synthesis of organic molecules, metal–organic frameworks (MOFs) as heterogenous catalysts have been investigated in a variety of chemical processes, including Friedel–Crafts reactions, condensation reactions, oxidations, and coupling reactions, and utilized owing to their specific properties such as high porosity, tuneability, extraordinary catalytic activity, and recyclability. The eminent copper-tailored MOF materials can be exceptionally dynamic and regioselective catalysts for click reactions (1,3-dipolar cycloaddition reaction). Considering the fact that Cu(I)-catalyzed alkyne–azide cycloaddition (CuAAC) reactions can be catalyzed by several other copper catalysts such as Cu (II)-β-cyclodextrin, Cu(OAc)2, Fe3O4@SiO2, picolinimidoamide–Cu(II) complex, and Cu(II) porphyrin graphene, the properties of sorption and reusability, as well as the high density of copper-MOFs, open an efficient and robust pathway for regimented catalysis of this reaction. This review provides a comprehensive description and analysis of the relevant literature on the utilization of Cu-MOFs as catalysts for CuAAC ‘click’ reactions published in the past decade.

Organo-macrocycle-containing hierarchical metal-organic frameworks and cages: design, structures, and applications

Developing hierarchical ordered systems is challenging. Using organo-macrocycles to construct metal-organic frameworks (MOFs) and porous coordination cages (PCCs) provides an efficient way to obtain hierarchical assemblies. Macrocycles, such as crown ethers, cyclodextrins, calixarenes, cucurbiturils, and pillararenes, can be incorporated within MOFs/PCCs and they also endow the resultant composites with enhanced properties and functionalities. This review summarizes recent developments of organo-macrocycle-containing hierarchical MOFs/PCCs, emphasizing applications and structure-property relationships of these hierarchically porous materials. This review provides insights for future research on hierarchical self-assembly using macrocycles as building blocks and functional ligands to extend the applications of the composites.

MOF/POM hybrids as catalysts for organic transformations

Insertion of molecular metal oxides, e.g. polyoxometalates (POMs), into metal-organic frameworks (MOFs) opens up new research opportunities in various fields, particularly in catalysis. POM/MOF composites have strong acidity, oxygen-rich surface, and redox capacity due to typical characteristics of POMs and the large surface area, highly organized structures, tunable pore size, and shape are due to MOFs. Such hybrid materials have gained a lot of attention due to astonishing structural features, and hence have potential applications in organic catalysis, sorption and separation, proton conduction, magnetism, lithium-ion batteries, supercapacitors, electrochemistry, medicine, bio-fuel, and so on. The exceptional chemical and physical characteristics of POMOFs make them useful as catalysts in simple organic transformations with high capacity and selectivity. Here, the thorough catalytic study starts with a brief introduction related to POMs and MOFs, and is followed by the synthetic strategies and applications of these materials in several catalytic organic transformations. Furthermore, catalytic conversions like oxidation, condensation, esterification, and some other types of catalytic reactions including photocatalytic reactions are discussed in length with their plausible catalytic mechanisms. The disadvantages of the POMOFs and difficulties faced in the field have also been explored briefly from our perspectives.

Polyoxometalate-based CuII/CoII complexes tuned using various metal–pyrazole loops: design, diverse architectures and catalytic activity toward the oxidation of thioether derivatives

Three new polyoxometalate-based complexes with unique metal–pyrazole loops were synthesized, showing various architectures and finally resulting in different catalysis performance.

Dinuclear Copper Complex Immobilized on a Janus-Type Material as an Interfacial Heterogeneous Catalyst for Green Synthesis

We herein describe a rational design of a heterogeneous catalyst composed of a dinuclear cuprate anion being immobilized electrostatically on one surface of Janus-type nanosheets while the other surface is decorated with highly hydrophobic octyl groups. The catalyst was found to be well dispersible in the organic phase of a biphasic aqueous/organic mixture. It was characterized by means of elemental analysis, atomic absorption spectroscopy, mass spectrometry, N₂ absorption-desorption analysis, thermogravimetric analysis, scanning electron microscopy (SEM), and solid-state ¹³C and ²⁹Si cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy. The Janus nature of the catalyst was investigated by employing a selective surface labeling method and by means of SEM. The catalyst shows higher activity compared to a non-Janus analogue in a biphasic synthesis. It was successfully used for the azide-alkyne cycloaddition and the Chan-Lam C-N coupling reaction. In addition, new and simple ways have been established for the production of a coumarin-triazole derivative and for the synthesis of the biologically active compound Monastrol via a solvent-free Biginelli reaction. The role of the dinuclear copper centers is discussed mechanistically.

Self-Assembly of Polyoxometalate-Resorcin[4]arene-Based Inorganic-Organic Complexes: Metal Ion Effects on the Electrochemical Performance of Lithium Ion Batteries

With their adjustable structures and diverse functions, polyoxometalate (POM)-resorcin[4]arene-based inorganic-organic complexes are a kind of potential multifunctional material. They have potential applications for lithium ion batteries (LIBs). However, the relationship between different coordinated metal ions and electrochemical performance has rarely been investigated. Here, three functionalized POM-resorcin[4]arene-based inorganic-organic materials, [Co₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅2 EtOH⋅4.5 H₂ O (1), [Ni₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅4 EtOH⋅13 H₂ O (2), and [Zn₂ (TMR4 A)₂ (H₂ O)₁₀ ][SiW₁₂ O₄₀ ]⋅2 EtOH⋅2 H₂ O (3), have been synthesized. Furthermore, to enhance the conductivities of these compounds, 1-3 were doped with reduced graphene oxide (RGO) to give composites 1@RGO-3@RGO, respectively. As anode materials for LIBs, 1@RGO-3@RGO can deliver very high discharge capacities (1445.9, 1285.0 and 1095.3 mAh g^-1 , respectively) in the initial run, and show discharge capacities of 898, 665 and 651 mAh g^-1 , respectively, at a current density of 0.1 A g^-1 over 100 runs. More importantly, the discharge capacities of 319, 283 and 329 mAh g^-1 were maintained for 1@RGO-3@RGO even after 400 cycles at large current density (1 A g^-1 ).

Cu(I)-Catalyzed Click Chemistry in Glycoscience and Their Diverse Applications

Copper(I)-catalyzed 1,3-dipolar cycloaddition between organic azides and terminal alkynes, commonly known as CuAAC or click chemistry, has been identified as one of the most successful, versatile, reliable, and modular strategies for the rapid and regioselective construction of 1,4-disubstituted 1,2,3-triazoles as diversely functionalized molecules. Carbohydrates, an integral part of living cells, have several fascinating features, including their structural diversity, biocompatibility, bioavailability, hydrophilicity, and superior ADME properties with minimal toxicity, which support increased demand to explore them as versatile scaffolds for easy access to diverse glycohybrids and well-defined glycoconjugates for complete chemical, biochemical, and pharmacological investigations. This review highlights the successful development of CuAAC or click chemistry in emerging areas of glycoscience, including the synthesis of triazole appended carbohydrate-containing molecular architectures (mainly glycohybrids, glycoconjugates, glycopolymers, glycopeptides, glycoproteins, glycolipids, glycoclusters, and glycodendrimers through regioselective triazole forming modular and bio-orthogonal coupling protocols). It discusses the widespread applications of these glycoproducts as enzyme inhibitors in drug discovery and development, sensing, gelation, chelation, glycosylation, and catalysis. This review also covers the impact of click chemistry and provides future perspectives on its role in various emerging disciplines of science and technology.

Highly Efficient Synthesis of p-Benzoquinones Catalyzed by Robust Two-Dimensional POM-Based Coordination Polymers

Selective oxidation of alkyl-substituted phenols offers efficient access to p-benzoquinones (BQs) that serve as key components for synthesizing biologically active compounds, but rational manufacture of efficient recyclable catalysts for such a reaction remains a severe challenge. Herein, two crystalline 2D polyoxometalate-based coordination polymers (POMCPs), formulated as H₃[Cu^I₃(L)₃]₂[PM₁₂O₄₀]·xH₂O (M = Mo, x = 4 for 1; M = W, x = 6 for 2; and HL = 4-(1H-tetazol-5-yl)pyridine), are prepared by a mineralizer-assisted one-step synthesis strategy and explored as heterogeneous catalysts for p-BQs synthesis. Both compounds have been characterized through elemental analysis, EDS analysis, infrared spectroscopy, UV-vis diffuse reflectance spectrum, EPR, XPS, BET, single-crystal, and powder X-ray diffraction. Single-crystal X-ray diffraction analysis indicates that both 1 and 2 exhibit an interesting 2D sheet structure composed of 2-connected Keggin type anions [PM₁₂O₄₀]^3- and hexa-nuclear {Cu^I₆(HL)₆} cluster-based metal-organic chains via Cu···O interactions. When used as catalysts, POMCPs 1 and 2 have excellent catalytic activities in the selective oxidation of substituted phenols to p-BQs with H₂O₂. Notedly, in the model reaction from 2,3,6-trimethylphenol (TMP) to the vitamin E key intermediate trimethyl-p-benzoquinone (TMBQ), the catalytic activities expressed by turnover frequency (TOF) of 1 and 2 can reach an unprecedented 2400 and 2000 h^-1, respectively, at close to 100% TMBQ yield. The truly heterogeneous nature, stability, and structural integrity of both catalysts were ascertained by FTIR, PXRD techniques, and the following cycles. Mechanism studies reveal that both catalysts can involve a dual reaction pathway through a heterolytic oxygen atom transfer mechanism and homolytic radical mechanism. Moreover, the 2D POMCPs with highly accessible bilateral active sites and efficient mass transfer efficiency possess superior catalytic performance to their analogous 3D species.

Assembly of polyoxometalate-thiacalix[4]arene-based inorganic-organic hybrids as efficient catalytic oxidation desulfurization catalysts

Self-assembly of polyoxometalates, Ni(ii)/Ag(i) cations and tetra-[5-(mercapto)-1-methyltetrazole]-thiacalix[4]arene (L) yielded three inorganic-organic hybrids, namely, [Ni₃L₂(CH₃OH)₆(H₂O)₄][PMo₁₂O₄₀]₂·3CH₃OH·2H₂O (1), [Ni₃L₂(CH₃OH)₆(H₂O)₄][PW₁₂O₄₀]₂·3CH₃OH·2H₂O (2) and [Ag₃L(PMo₁₂O₄₀)] (3). In hybrids (1) and (2), Ni(ii) cations are linked by L ligands to produce layered frameworks, and H bonds among the [PMo₁₂O₄₀]^3-/[PW₁₂O₄₀]^3- anions and L ligands lengthen the structures to form 3D supramolecular architectures. Hybrid (3) exhibits a 3D architecture, of which Ag(i) cations not only coordinated with the N and O atoms of L ligands and [PMo₁₂O₄₀]^3- anions simultaneously, but also connected each other by Ag-Ag interactions. It is worth mentioning that 1 and 3 as recyclable catalysts show excellent heterogeneous catalytic activity in oxidation desulfurization reactions.

Copper-ligand clusters dictate size of cyclized peptide formed during alkyne-azide cycloaddition on solid support

Peptide and peptidomimetic cyclization by copper-catalyzed alkyne-azide cycloaddition (CuAAC) reaction have been used to mimic disulfide bonds, alpha helices, amide bonds, and for one-bead-one-compound (OBOC) library development. A limited number of solid-supported CuAAC cyclization methods resulting in monomeric cyclic peptide formation have been reported for specific peptide sequences, but there exists no general study on monocyclic peptide formation using CuAAC cyclization. Since several cyclic peptides identified from an OBOC CuAAC cyclized library has been shown to have important biological applications, we discuss here an efficient method of alkyne-azide 'click' catalyzed monomeric cyclic peptide formation on a solid support. The reason behind the efficiency of the method is explored. CuAAC cyclization of a peptide sequence with azidolysine and propargylglycine is performed under various reaction conditions, with different catalysts, in the presence or absence of an organic base. The results indicate that piperidine plays a critical role in the reaction yield and monomeric cycle formation by coordinating to Cu and forming Cu-ligand clusters. A previously synthesized copper compound containing piperidine, [Cu₄I₄(pip)₄], is found to catalyze the CuAAC cyclization of monomeric peptide effectively. The use of 1.5 equivalents of CuI and the use of DMF as solvent is found to give optimal CuAAC cyclized monomer yields. The effect of the peptide sequence and peptide length on monomer formation are also investigated by varying either parameter systemically. Peptide length is identified as the determining factor for whether the monomeric or dimeric cyclic peptide is the major product. For peptides with six, seven, or eight amino acids, the monomer is the major product from CuAAC cyclization. Longer and shorter peptides on cyclization show less monomer formation. CuAAC peptide cyclization of non-optimal peptide lengths such as pentamers is affected significantly by the amino acid sequence and give lower yields.

Metal-Organic Frameworks: Synthetic Methods and Potential Applications

Metal-organic frameworks represent a porous class of materials that are build up from metal ions or oligonuclear metallic complexes and organic ligands. They can be considered as sub-class of coordination polymers and can be extended into one-dimension, two-dimensions, and three-dimensions. Depending on the size of the pores, MOFs are divided into nanoporous, mesoporous, and macroporous items. The latter two are usually amorphous. MOFs display high porosity, a large specific surface area, and high thermal stability due to the presence of coordination bonds. The pores can incorporate neutral molecules, such as solvent molecules, anions, and cations, depending on the overall charge of the MOF, gas molecules, and biomolecules. The structural diversity of the framework and the multifunctionality of the pores render this class of materials as candidates for a plethora of environmental and biomedical applications and also as catalysts, sensors, piezo/ferroelectric, thermoelectric, and magnetic materials. In the present review, the synthetic methods reported in the literature for preparing MOFs and their derived materials, and their potential applications in environment, energy, and biomedicine are discussed.

Defect engineering: an effective tool for enhancing the catalytic performance of copper-MOFs for the click reaction and the A3 coupling

A series of Cu(i)-enriched and Lewis basic site-containing defect-engineering MOFs was investigated for significantly enhanced catalytic performance in the click reaction and the A³ coupling.

Magnetic AgNPs/Fe3O4@chitosan/PVA nanocatalyst for fast one-pot green synthesis of propargylamine and triazole derivatives

A new green magnetic nanocatalyst was introduced for one-pot fast synthesis of propargylamine and triazole derivatives.

Polyoxometalate-based metal–organic frameworks for heterogeneous catalysis

POM-based MOFs simultaneously possessing the virtues of POMs and MOFs exhibit excellent heterogeneous catalytic properties.

Gold-like Thiolate-Protected Ultrasmall Cubic Copper Nanocluster-Based Metal-Organic Framework as a Selective Catalyst for Stepwise Synthesis of Unsymmetric Bistriazole by Click Reaction

We report a facile synthesis of a thiolate-protected water-soluble ultrasmall cubic copper nanocluster-based metal-organic framework (CuMOF) as an efficient and chemoselective catalyst for the azide-alkyne click reaction. Interestingly, the diffuse reflectance spectra of CuMOFs exhibit three discrete plasmon bands at 463, 505, and 674 nm, which are similar to those corresponding to the fingerprint region of thiolate-protected atomically precise Au₂₅ nanoclusters; hence, CuMOFs are termed as gold-like ultrasmall cubic copper nanoclusters. The high-resolution transmission electron microscopy (HRTEM) and powder X-ray diffraction (XRD) patterns confirm the cubic morphology of CuMOFs with nanoclusters showing particle size distribution of ∼2-12 nm. The matrix-assisted laser desorption ionization (MALDI) spectrum of CuMOFs is attributed to the individual particles consisting of few Cu_n(SR)_m with Cu(0) core atoms and Cu(I)SR staples, i.e., Cu₂(SR)₄, Cu(SR)₆, Cu₃(SR)₇, and Cu₄(SR)₈. To our surprise, the unsymmetric bistriazoles resulting from the click reaction of bifunctional azides and alkynes in the presence of CuMOFs were achieved by step-by-step conversion of the terminal azide selectively with maximum yield in the range of 70-88%. The nitrogen adsorption-desorption studies confirm the size-dependent surface area, pore volume, and pore size for the CuMOFs prepared by varying metal-to-ligand ratios. The plausible mechanism for the selective mono-click at CuMOFs suggests the existence of bifunctional terminal interactions via thiol and sulfonate groups that might have provided the site-isolation-based active sites for selective catalysis. The easy recovery of CuMOFs and their reusability up to 5 times without significant loss of activity are very promising for the selective organic conversions in pharmaceutical and industrial formulations.

Water and Metal-Organic Frameworks: From Interaction toward Utilization

The steep stepwise uptake of water vapor and easy release at low relative pressures and moderate temperatures together with high working capacities make metal-organic frameworks (MOFs) attractive, promising materials for energy efficient applications in adsorption devices for humidity control (evaporation and condensation processes) and heat reallocation (heating and cooling) by utilizing water as benign sorptive and low-grade renewable or waste heat. Emerging MOF-based process applications covered are desiccation, heat pumps/chillers, water harvesting, air conditioning, and desalination. Governing parameters of the intrinsic sorption properties and stability under humid conditions and cyclic operation are identified. Transport of mass and heat in MOF structures, at least as important, is still an underexposed topic. Essential engineering elements of operation and implementation are presented. An update on stability of MOFs in water vapor and liquid systems is provided, and a suite of 18 MOFs are identified for selective use in heat pumps and chillers, while several can be used for air conditioning, water harvesting, and desalination. Most applications with MOFs are still in an exploratory state. An outlook is given for further R&D to realize these applications, providing essential kinetic parameters, performing smart engineering in the design of systems, and conceptual process designs to benchmark them against existing technologies. A concerted effort bridging chemistry, materials science, and engineering is required.

Superior absorption capacity of tremella like ferrocene based metal-organic framework in removal of organic dye from water

Removal of organic dyes from water by porous materials is considered as an efficient and low-cost way. Herein for the first time novel tremella-like ferrocene based metal-orgainc framework (TMOF) nanosheets designated as TFMOF were synthesized through a traditional solvothermal method. This ferrocene based TFMOF exhibit outstanding removal efficiency towards organic dye Congo red (CR) from water. After optimizing the reaction conditions, the highest adsorption capacity of 252.25 mg g^-1 could be achieved within 10 min. Furthermore, the investigation of adsorption kinetic indicated this adsorption process could be described as a pseudo-second order kinetic model with k₂ and q_e of 0.0488 g mg^-1 min^-1 and 241.5 mg g^-1, respectively. The adsorption isotherm could also be described as the Sips isotherm model according to the fitting calculation. The removal efficiency could maintain around 50 % with adsorption capacity of 124.38 mg g^-1 after 3 cycles, giving the TFMOF promising potential in the practical water treatment.

POM@MOF Hybrids: Synthesis and Applications

The hybrid materials that are created by supporting or incorporating polyoxometalates (POMs) into/onto metal–organic frameworks (MOFs) have a unique set of properties. They combine the strong acidity, oxygen-rich surface, and redox capability of POMs, while overcoming their drawbacks, such as difficult handling, a low surface area, and a high solubility. MOFs are ideal hosts because of their high surface area, long-range ordered structure, and high tunability in terms of the pore size and channels. In some cases, MOFs add an extra dimension to the functionality of hybrids. This review summarizes the recent developments in the field of POM@MOF hybrids. The most common applied synthesis strategies are discussed, together with major applications, such as their use in catalysis (organocatalysis, electrocatalysis, and photocatalysis). The more than 100 papers on this topic have been systematically summarized in a handy table, which covers almost all of the work conducted in this field up to now.

Three thiacalix[4]arene-based Cu(i) coordination polymers: catalytic activities for azide-alkyne cycloaddition reactions and luminescence properties

Three new coordination polymers, [Cu₂(CN)(L)(OCH₃)]·CH₃OH·3H₂O (1), [Cu₃(Br)₃(L)] (2) and [Cu(I)(L)]·1.5H₂O (3), have been solvothermally prepared by reacting L (5,11,17,23-tetra-tert-butyl-25,26,27,28-tetra[(3-pyridylmethyl)oxy]-2,8,14,20-tetrathiacalix[4]arene) with Cu(i) halide. 1 and 2 exhibit layers. 3 displays a chain, a supramolecular layer constructed by hydrogen bonds. The performance of 1-3 was examined as heterogeneous catalysts for azide-alkyne cycloaddition reactions. Most strikingly, 1 and 2 show predominant efficiency with high regioselectivity and excellent recyclability. Remarkably, solids 1-3 all have luminescence characteristics under irradiation with a UV lamp.

An unprecedented cobalt(ii)-containing Wells–Dawson-type tungstovanadate-based metal–organic framework as an efficient catalyst for ring-opening polymerization of ε-caprolactone

An unprecedented organic–inorganic hybrid material based on Wells–Dawson-type tungstovanadate building blocks and cobalt(ii)–organic framework with a bis(triazole) ligand was prepared and employed to catalyze solvent-free ROP of caprolactone.

Highly Stable Copper(I)-Thiacalix[4]arene-Based Frameworks for Highly Efficient Catalysis of Click Reactions in Water

Environmentally friendly metal-organic frameworks (MOFs) have gained considerable attention for their potential use as heterogeneous catalysts. Herein, two Cu^I -based MOFs, namely, [Cu₄ Cl₄ L]⋅CH₃ OH⋅1.5 H₂ O (1-Cl) and [Cu₄ Br₄ L]⋅DMF⋅0.5 H₂ O (1-Br), were assembled with new functionalized thiacalix[4]arenes (L) and halogen anions X^- (X=Cl and Br) under solvothermal conditions. Remarkably, catalysts 1-Cl and 1-Br exhibit great stability in aqueous solutions over a wide pH range. Significantly, MOFs 1-Cl and 1-Br, as recycled heterogeneous catalysts, are capable of highly efficient catalysis for click reactions in water. The MOF structures, especially the exposed active Cu^I sites and 1D channels, play a key role in the improved catalytic activities. In particular, their catalytic activities in water are greatly superior to those in organic solvents or even in mixed solvents. This work proposes an attractive route for the design and self-assembly of environmentally friendly MOFs with high catalytic activity and reusability in water.