Cellulose-Based Sensor Containing Phenanthroline for the Highly Selective and Rapid Detection of Fe2+ Ions with Naked Eye and Fluorescent Dual Modes

Readily soluble cellulose-based fluorescent probes for the detection and removal of Fe3+ ion

Cellulose is an economical, biodegradable, widely available, and eco-friendly natural macromolecule. But its utilization has been restricted due to its insolubility in water and common organic solvents. In this work, soluble fluorescent probes based on cellulose were synthesized. Firstly, the primary hydroxyl group in glucose units was reacted with SOCl2 to introduce Cl and obtain chloro-cellulose (Cell-Cl). This operation breaks down the regular structure and hydrogen bonding of the original cellulose, enabling it to dissolve in DMSO. Secondly, the Cell-Cl reacted with CS2 and 2-mercaptobenzothiazole to obtain a cellulose-based macromolecular RAFT reagent (Cell-CTA). Finally, the fluorescent monomers which bears -C=C- and naphthalimide, and methacrylic acid (MAA) were grafted onto the main chain of cellulose through RAFT polymerization. Thus, cellulose-based readily soluble macromolecular fluorescent probes were obtained. The cellulose-based probes can specifically recognize Fe3+ in pure water and can be recycled and regenerated. Additionally, the cellulose-based probes exhibit remarkable adsorption and separation properties for Fe3+ ions. The modification of cellulose decreases its crystallinity and introduces hydrophilic groups and fluorophores, which enables cellulose to be soluble in both pure water and the organic solvent DMSO. This work expands the application range of cellulose-based copolymers.

The synthesis of multifunctional cellulose graft alternating copolymers of 3,4-dihydrocoumarin and epoxides in DBU/DMSO/CO2 solvent system

Cellulose graft copolymers having well-defined structures could incorporate the characteristics of both the cellulose skeleton and side chains, providing a new method for the preparation functionalised cellulose derivatives. Herein, a series of multifunctional cellulose grafted, alternating 3,4-dihydrocoumarin (DHC) and epoxide (EPO) copolymers (cell-g-P(DHC-alt-EPO)) were prepared in a metal-free DBU/DMSO/CO2 solvent system without adding additional catalyst. Four examples of cell-g-P(DHC-alt-EPO) with tunable thermal and optical properties were synthesized by copolymerization of DHC with styrene oxide (SO), propylene oxide (PO), cyclohexene oxide (CHO) or furfuryl glycidyl ether (FGE) onto cellulose. The nonconjugated cell-g-P(DHC-alt-EPO) showed UV absorption properties with the maximum absorption peak at 282 nm and 295 nm and photoluminescence performance. A clustering-triggered emission mechanism was confirmed and consistent with DFT theoretical calculations. In DMSO solution, the copolymer (DHCSO5) with DP of 11.64 showed ACQ behaviour as the concentration increased. In addition, DHCSO5 had good antioxidant capacity with an instantaneous radical scavenging activity of 2,2-diphenyl-1-picrylhydrazine (DPPH) up to 65 % at a concentration of 40 mg/ ml and increased to 100 % after 30 min. Thus, the multifunctional cell-g-P(DHC-alt-EPO) materials had a variety of potential applications in the fields of fluorescent printing, bio-imaging, UV- shielding and antioxidants.

Synthesis, Crystal Structure and Fluorimetric Study of 2-phenylphthalazin-1(2H)-one: a Highly Selective Florescent Chemosensor for Detection of Fe3+ and Fe2+ Metal Ions

A ligand, 2-phenylphthalazin-1(2H)-one (K), was synthesized by refluxing 2-formylbenzoic acid with phenyl hydrazine in presence of ethanol. FTIR, elemental analysis and single crystal XRD techniques were used to elucidate the structure. Fluorimetric turn-off response was recorded when solution of ligand (K) in DMF was treated with aqueous solution of Fe3+ and Fe2+ metal ions. No specific changes were observed on addition of other metal ions (Pb2+, Cd2+, Mn2+, Zn2+, Ba2+, Ni2+, Al3+, Ag1+, Co2+, Ca2+, Cu2+, Mg2+, Cr3+). Limit of Detection (LOD) was calculated for Fe2 and Fe3+as 2.4 µM and 2.5µM respectively, which is quite below to the recommended value 5.4 µM of the Environment Protection Agency of USA. Association constants for Fe3+ and Fe2+ metal ions were determined as 6 × 10-4 M-1 and 3.6 × 10-4 M-1 respectively. Benesi-Hildebrand plot confirmed 1:1 binding ratio between metal ions and ligand.

A novel coumarin derivative-modified cellulose fluorescent probe for selective and sensitive detection of CN- in food samples

In this work, a novel coumarin derivative-modified cellulose acetate (DCB-CA) was synthesized as a fluorescent probe for highly selective and sensitive determination of CN^- in food samples. The DCB-CA was synthesized by using CA as a skeleton, and the coumarin derivative as the fluorophore. The DCB-CA obtained was characterized by different methods including FTIR, SEM, ¹H-NMR, TGA and UV-vis spectroscopy. The DCB-CA exhibited a significant "turn-off" fluorescence response to CN^-, accompanied by a distinct fluorescence color change from bright yellow to colorless. The detection limit of CN^- using DCB-CA was calculated to be 5.8 × 10^-7 M, which was much lower than the threshold limit of CN^- recommended by the World Health Organization (1.9 × 10^-6 M). Because of the favorable solubility and processability of the CA, the DCB-CA was easily processed into different fluorescent materials including fluorescent films and coatings. The fluorescent film obtained was also applied to the selective detection of CN^-. Furthermore, the DCB-CA was successfully applied to determine CN^- in food samples.

Fabrication of stable solid fluorescent starch materials based on Hantzsch reaction

In this paper, a series of fluorescent starches were prepared simply and effectively by Hantzsch multi-component reaction (MRC). These materials showed bright fluorescence emission. Notably, due to the existence of polysaccharide skeleton, starch molecules can effectively inhibit the common aggregation induced quenching effect caused by the aggregation of conjugated molecules in traditional organic fluorescent materials. Meanwhile, the stability of this material is so excellent that the fluorescence emission of the dried starch derivatives would not destroy after boiling at a high temperature in some common solvents, and even brighter fluorescence can be stimulated in alkaline solution. In addition to fluorescence, starch was also endowed with hydrophobic property by one-pot method connecting long alkyl chains. Compared with native starch, the contact angle of fluorescent hydrophobic starch increased from 29° to 134°. Furthermore, the fluorescent starch can be prepared into film, gel and coating by different processing methods. The preparation of these Hantzsch fluorescent starch materials provide a new way for the functional modification of starch materials and has great application potential in detecting, anti-counterfeiting, security printing and other related fields.

Selective turn-on fluorescence sensing of Fe2+ in real water samples by chalcones

The design of fluorescence sensor for selective detection of Fe²⁺ is very important as it is part of different biochemical redox system related to a number of diseases. In many occasion sensors are unable to distinguish Fe²⁺ from Fe³⁺ ions. In the present work, we report simple chalcone type sensors for sensing Fe²⁺ ions in semi aqueous system. The receptors R1 and R2 have showed excellent sensing properties at pH 7 in CH₃OH-H₂O (1:1, v/v) solvent system. The fluorescence emission intensity of the complexes between hosts and Fe²⁺ is least affected by the other competitive metal ions leading to the formation of very tight host-guest complex. The LOD for the R1 and R2 for Fe²⁺ are 1.91 μM and 3.54 μM respectively, which is quite low in compared to the many other reported sensors. The practical applicability of these sensors is determined by the detection of Fe²⁺ in real water samples. So chalcones would be cost effective PET inhibited fluorescence sensor for Fe²⁺.

Do matrix metalloproteinase and cathepsin K inhibitors work synergistically to reduce dentin erosion?

OBJECTIVES

To evaluate the effects of matrix metalloproteinase (MMP) and cathepsin K (catK) inhibitors on resistance to dentin erosion.

METHODOLOGY

A total of 96 dentin specimens (3×3×2 mm) were prepared and randomly assigned into four groups (n=24): deionized water (DW); 1 µM odanacatib (ODN, catK inhibitor); 1 mM 1,10-phenanthroline (PHEN, MMP inhibitor); and 1 µM odanacatib + 1 mM 1,10-phenanthroline (COM). Each group was further divided into two subgroups for the application of treatment solutions before (PRE) and after erosive challenges (POST). All specimens were subjected to four daily erosive challenges for 5 d. For each erosive challenge, the specimens in subgroup PRE were immersed in the respective solutions before cola drinks, while the specimens in subgroup POST were immersed in the respective solutions after cola drinks (the immersion duration was 5 min in both cases). All specimens were stored in artificial saliva at 37°C between erosive challenges. The erosive dentin loss (EDL) was measured by profilometry. The residual demineralized organic matrix (DOM) of specimens was removed using type VII collagenase and evaluated by profilometry. Both the EDL and thickness of the residual DOM were statistically analyzed by two-way analysis of variance (ANOVA) and Bonferroni's test (α=0.05). The surface topography and transverse sections of the specimens were observed using SEM. MMPs and catK were immunolabeled in the eroded dentin and in situ zymography was performed to evaluate the enzyme activity.

RESULTS

Significantly lower EDL was found in the groups ODN, PHEN, and COM than in the control group (all p<0.05), while no significant difference in EDL was found among the groups ODN, PHEN, and COM (all p>0.05). The application sequence showed no significant effect on the EDL of the tested groups (p=0.310). A significantly thicker DOM was observed in the group ODN than in the control group regardless of the application sequence (both p<0.05). The treatment with ODN, PHEN, and COM inhibited the gelatinolytic activity by approximately 46.32%, 58.6%, and 74.56%, respectively.

CONCLUSIONS

The inhibition of endogenous dentinal MMPs and catK increases the acid resistance of human dentin but without an apparent synergistic effect. The inhibition of MMPs and catK is equally effective either before or after the acid challenge.

Novel Paraquat Detection Strategy Enabled by Carboxylatopillar[5]arene Confined in Nanochannels on a Paper-Based Sensor

Paper-based optical sensors have emerged as a promising technology for pesticide detection and attracted extensive attention. However, in practical analytical applications, it may suffer from limited sensitivity with traditional signal amplification strategies. Here, we developed a novel mesoporous silica-modified paper-based sensor for a sensitive capture and analysis of the pesticide paraquat. Carboxylatopillar[5]arene was covalently introduced into the nanochannels for the rapid capture of target paraquat molecules due to the mass transfer confinement effect within nanopores. In addition, the large specific surface area of mesoporous silica enabled high-abundance immobilization of the capture agent and promoted its binding efficiency, which, in turn, contributed to improving the sensitivity. This work highlights the great potential of nanochannels as a development platform for sensitive paper-based sensors that can be used to develop new systems for the detection of paraquat and even other pesticides.

Dual modification of cellulose with esterification and carbonation in DMSO/DBU/CO2 system as fluorescent additive for pH detection

An easy and effective way to synthesize dual-functionalized cellulose derivatives with processability and fluorescence functionality by one-pot modification of successive esterification and carbonation under mild condition is established with the use of DMSO/DBU/CO₂ system. Accordingly, four kinds of dual-functionalized cellulose derivatives with rather good fluorescent response are obtained. After blending the synthesized dual-functionalized cellulose derivative with cellulose acetate as functional additive in solution, cast film with the elastic modulus, stress and strain reaches to 2.2 GPa, 34.1 MPa and 5.7% is prepared. Besides, the cast film also exhibits the ability to detect the pH value at 12-14 with detection accuracy of 0.4 through the change of fluorescent color. This research shows a simple but effective way to prepare dual-functionalized cellulose derivatives for the high-quality applications in field of detection.

Corrosion self-warning and repair tracking of polymeric coatings based on stimulus responsive nanosensors

Smart polymeric coatings with early corrosion self-warning and damage self-repairing characteristics have garnered tremendous interest due to their ability to sense corrosion reactions and repair coating defects. However, tracking the repair process and its underlying protection mechanism is highly challenging. Herein, we report the construction of a novel composite coating by incorporating multifunctional nanosensors (graphene oxide-zeolitic imidazole frameworks loaded with 1,10-phenanthroline) into a thermo-responsive polyurethane. Under damaging events, the localized acidity derived from metal corrosion stimulates the decomposition of the nanosensors to produce 1,10-phenanthroline and benzimidazole. The generated ferrous ions are rapidly sensed by the released 1,10-phenanthroline to produce a conspicuous red color, which warns of the corrosion occurrence. In profiting from the photothermal effect of graphene oxide, the composite coating exhibits efficient crack closure behavior under near-infrared light irradiation. Morphology observation indicates that a coating scratch (about 30 μm wide) almost closed with 20 s of irradiation. The photothermally activated crack closure combined with benzimidazole inhibition endows the prepared coating with superior self-repairing performance. Interestingly, the change in color intensity around the coating defect can assist in tracking the repair process. Therefore, this work provides a novel strategy to visualize microscopic behaviors during damage and repair processes.

A Highly Fluorescent Pyrene-Based Sensor for Selective Detection Of Fe3+ Ion in Aqueous Medium: Computational Investigations

In this work, we introduce a highly selective and sensitive fluorescent sensor based on pyrene derivative for Fe(III) ion sensing in DMSO/water media. 2-(pyrene-2-yl)-1-(pyrene-2-ylmethyl)-1H-benzo[d]imidazole (PEBD) receptor was synthesized via simple condensation reaction and confirmed by spectroscopic techniques. The receptor exhibits fluorescence quenching in the presence of Fe(III) ions at 440 nm. ESI-MS and Job's method were used to confirm the 1:1 molar binding ratio of the receptor PEBD to Fe(III) ions. Using the Benesi-Hildebrand equation the binding constant value was determined as 8.485 × 10³ M^-1. Furthermore, the limit of detection (LOD, 3σ/K) value was found to be 1.81 µM in DMSO/water (95/5, v/v) media. According to the Environmental Protection Agency (EPA) of the United States, it is lower than the acceptable value of Fe³⁺ in drinking water (0.3 mg/L). The presence of 14 other metal ions such Co²⁺, Cr³⁺, Cu²⁺, Fe²⁺, Hg²⁺, Pb²⁺, K⁺, Ni²⁺, Mg²⁺, Cd²⁺, Ca²⁺, Mn²⁺, Al³⁺, and Zn²⁺ did not interfere with the detection of Fe(III) ions. The fluorescence life-time of the receptor PEBD with and without Fe³⁺ ion was found to be 1.097 × 10^-9 s and 0.9202 × 10^-9 s respectively. Similarly, the quantum yield of the receptor PEBD with Fe³⁺ and without Fe³⁺ ion was calculated, and found as 0.05 and 0.25 respectively. Computational studies of the receptor PEBD were carried out with density functional theory (DFT) using B3LYP/ 6-311G (d, p), LANL2DZ level of theory.

Conjugated microporous organic polymer as fluorescent chemosensor for detection of Fe3+ and Fe2+ ions with high selectivity and sensitivity

A conjugated microporous organic polymer (TPA-Bp) comprised of triphenylamine (TPA) and 2,2'-bipyridine-5,5'-diformaldehyde (Bp) was prepared via the Schiff-base reaction under ambient conditions. TPA-Bp is an amorphous and microporous spherical nanoparticle with very high stability. TPA-Bp suspension in DMF displayed strong fluorescence emission and selective fluorescence quenching response towards Fe³⁺ and Fe²⁺ ions. The fluorescence intensity of TPA-Bp at 331 nm presents linear relationship with the concentrations of both Fe³⁺ and Fe²⁺ with low detection limits of 1.02 × 10^-5 M for Fe³⁺ and 5.37 × 10^-6 M for Fe²⁺. The results of X-ray photoelectron spectroscopy (XPS) and Fourier Transform infrared spectroscopy (FTIR) confirm the selective coordination of N atoms of pyridine unit with Fe ions. The fluorescence quenching of TPA-Bp upon the addition of Fe³⁺/Fe²⁺ ions can be attributed to the absorption competition quenching (ACQ) mechanism and the energy transfer between TPA-Bp and Fe³⁺/Fe²⁺ ions. This work demonstrates that the conjugated microporous polymers are promising candidates as luminescent sensor for detection of the special analytes in practical applications.

Efficient and portable cellulose-based colorimetric test paper for metal ion detection

Fabrication of metal ion detection materials generally involved problems such as high cost and complicated processes of pretreatment and operation. Herein, a novel colorimetric test paper for metal ions detection was developed based on functionalized cellulose fibers. Acetoacetyl groups were introduced on cellulose fibers by a surface esterification process. The obtained cellulose acetoacetate (CAA) fibers were made into CAA paper via a paper-making process. The CAA paper possessed robust mechanical property, thermal stability selectivity and rapid response to Fe³⁺ and Cu²⁺ ions, with an obvious naked-eye color change within 5 s. The mechanism of this visual recognition for metal ions due to that the acetoacetyl groups coordination chelated with metal ion to form six-membered ring structure, further leading to the color change of the materials. It provided a facile and universal method to prepare efficient and portable cellulose-based test paper, which has great potential in metal ion detection field.

pH-Responsive Dual-Emitting Hydroxypropyl Methylcellulose-Based Material Containing Fluorescein Isothiocyanate and CaAl2O4:Eu2+,Dy3+ Phosphors

Herein, we prepared a dual-emitting cellulose film with pH response, which offers high transparency, good flexibility, and intense thermal stability. The color of the fluorescent film that changes from green to blue-green to cyan was achieved by covalently attaching organic dye fluorescein isothiocyanate (FITC), inorganic pigment NH₂-CaAl₂O₄:Eu²⁺,Dy³⁺ (NH₂-CAO), and organic-inorganic fluorescence species onto hydroxypropyl methylcellulose (HMPC) chains, respectively. Benefiting from the "anchoring" and "dilution" effects of the HMPC skeleton, HPMC-FITC and HPMC@NH₂-CAO fluorescent solutions and solid-state films emit green and blue-green fluorescence at 535 and 480 nm, respectively. The obtained pH-responsive cellulose-based dual-emitting film can continuously emit cyan light at the two emission peaks of 480 and 535 nm for a long time and exhibits strong fluorescence intensity under exceedingly alkaline conditions. Moreover, the HPMC-based fluorescent solution coated on glass and fabric substrate shows strong fluorescence under 365 nm UV light stimulation. Compared with the existing cellulose-based fluorescent films, this work expands the emission wavelength range of cellulose-based fluorescent films and prolongs the luminescent time of environment-responsive fluorescent films. This provides a new way to prepare intelligent color-changing fabric-coating materials and sensitive pH sensors based on biomass.

Mesopores silica nanotubes-based sensors for the highly selective and rapid detection of Fe2+ ions in wastewater, boiler system units and biological samples

Mesopores silica nanotubes (MSNTs)-based chemical sensors for the rapid detection and of highly selective Fe²⁺ ions have been prepared. The novel nanosensors were prepared via immobilization of 1,10-phenanthroline-5-amine (PA) and bathophenanthroline (BP) onto the MSNTs. The resultant PA and BP sensors display high sensitivity for detection the Fe²⁺ ions in tap water, river water, sea water, two units in simple cycle power station, and biological samples. More interestingly, upon meeting ultra-trace amount of Fe²⁺ ions, a red complex appears at once. Color changes can be seen from the naked eye and tracked with a smartphone or spectrophotometric techniques. The response time that is necessary to achieve a stable signal was less than 15 s. The Univariate (Univar) calibration technique had been utilized for the determination of figures of merits. The detection limit obtained from the digital image analysis was 19 ppb (7.04 × 10^-7 M) for Fe²⁺ ions, while the obtained from the spectrophotometric method was 6.7 ppb (2.48 × 10^-7 M). Therefore, the two sensors had been successfully used in the determination of Fe²⁺ in several real samples with high sensitivity and selectivity. In addition, they can be used as a simple, rapid, and portable method to detect and quantify the pre rust in any cooler system.

Recent studies on cellulose-based fluorescent smart materials and their applications: A comprehensive review

The progress of bio-based fluorescent smart materials and their multifunctional applications have attained increasing interest in the recent decades. Cellulose is among the cheapest and widespread raw material on earth which can be modified into diverse useful materials. This review summarizes the chemical modification of cellulose into smart fluorescent materials. This further highlights on the fabrication of the prepared fluorescent materials into films, fibers, paper strips, carbon dots, hydrogels and solutions which are applied for the sensing of toxic metals and anions, pH, bioimaging, common organic solvents, aliphatic and aromatic amines, nitroaromatics, fluorescent printing, coating, and anti-counterfeiting applications. Finally, the discussion about the upcoming investigations, challenges, and options open for the cellulose-based luminescence sensors are communicated. We believe that this review will appeal more and more attention and curiosity for the chemists, biochemists, and chemical engineers working with the synthesis of cellulose-based fluorescent materials for widespread applications.

Development of an electrically responsive hydrogel for programmable in situ immobilization within a microfluidic device

A novel microfluidic channel device with programmable in situ formation of a hydrogel 3D network was designed. A biocompatible hybrid material consisting of iron ion-crosslinked alginate was used as the active porous medium. The sol-gel transition of the alginate was controlled by the oxidation state of Fe ions and regulated by an external electrical signal through an integrated gold plate electrode. The SEM images, FT-IR analysis, and rheological test demonstrated that homogeneous yet programmable hydrogel films were formed. The higher the concentration of the crosslinker (Fe(iii)), the smaller the pore and mesh size of the hydrogel. Moreover, the hydrogel thickness and volume were tailored by controlling the deposition time and the strength of electric current density. The as-prepared system was employed as an active medium for immobilization of target molecules, using BSA as a drug-mimicking protein. The reductive potential (activated by switching the current direction) caused dissolution of the hydrogel and consequently the release of BSA and Fe. The diffusion of the entrapped molecules was optimally adjusted by varying the dissolution conditions and the initial formulations. Finally, the altering electrical conditions confirm the programmable nature of the electrically responsive material and highlight its wide-ranging application potential.

Highly transparent, writable and photoluminescent foldable polymer film: When fluorescent dyes or pigments join cellulose-based microgel

We prepared a self-dispersed cellulose-based microgel via chemically bonding hydrophilic gelatin peptide chain onto cellulose glucose chain. Following, a variety of highly transparent, foldable, and writable photoluminescent polymer films was obtained through loading organic dyes and inorganic pigments onto cellulose-based microgel matrix, respectively. Benefiting from the coupling sites and network effect of microgel as well as the abundant hydroxyl, amino, and imino groups in its structure, the microgel containing organic dyes and inorganic pigments exhibit good dispersion and stability, and the resultant photoluminescent films emit bright yellow, orange, yellow-green, and blue-green fluorescence under UV light, respectively, especially the cellulose-based microgel stabilized inorganic alkaline earth aluminate hybrids exhibit continuous luminescence for a long time in the dark. Compared with the existing regenerated cellulose or CNCs-based fluorescent films, the cellulose-based microgel fluorescent films present higher transmittance and good biodegradability. This study can bring new ideas for the development of flexible luminescent devices.

Chiral Photonic Liquid Crystal Films Derived from Cellulose Nanocrystals

As a nanoscale renewable resource derived from lignocellulosic materials, cellulose nanocrystals (CNCs) have the features of high purity, high crystallinity, high aspect ratio, high Young's modulus, and large specific surface area. The most interesting trait is that they can form the entire films with bright structural colors through the evaporation-induced self-assembly (EISA) process under certain conditions. Structural color originates from micro-nano structure of CNCs matrixes via the interaction of nanoparticles with light, rather than the absorption and reflection of light from the pigment. CNCs are the new generation of photonic liquid crystal materials of choice due to their simple and convenient preparation processes, environmentally friendly fabrication approaches, and intrinsic chiral nematic structure. Therefore, understanding the forming mechanism of CNCs in nanoarchitectonics is crucial to multiple fields of physics, chemistry, materials science, and engineering application. Herein, a timely summary of the chiral photonic liquid crystal films derived from CNCs is systematically presented. The relationship of CNC, structural color, chiral nematic structure, film performance, and applications of chiral photonic liquid crystal films is discussed. The review article also summarizes the most recent achievements in the field of CNCs-based photonic functional materials along with the faced challenges.

Dopamine Functionalized S,N Co-doped Carbon Dots as a Fluorescent Sensor for the Selective Detection of Fe3+ and Fe2+ in Water

In current work, novel functionalized carbon dots have been designed and synthesized by covalently linking dopamine to the surface of S,N co-doped carbon dots (DA-S,N-CDs) for the selective detection of Fe³⁺ and Fe²⁺ in water. The as-synthesized DA-S,N-CDs emit blue fluorescence peaked at 470 nm and exhibit excitation-dependent tunable emissions. The tolerance towards pH, salt, and UV irradiation of synthesized carbon dots reveals excellent stability. Upon exposure to Fe³⁺ or Fe²⁺, the fluorescence of DA-S,N-CDs was selectively quenched, while other competitive cations did not change significantly. Under the optimal experimental conditions, the fluorescence intensity of DA-S,N-CDs showed a good linear relationship with the concentrations of Fe³⁺ and Fe²⁺ (5 - 200 μM for Fe³⁺ and 5 - 300 μM for Fe²⁺), and the limit of detection was 2.86 and 2.06 μM, respectively. Furthermore, considering the excellent stability and anti-interference, DA-S,N-CDs have been successfully used for the detection of Fe³⁺ and Fe²⁺ in environmental water.

Recent advances in colorimetry/fluorimetry-based dual-modal sensing technologies

Tailored to the increasing demands for sensing technologies, the fabrication of dual-modal sensing technologies through combining two signal transduction channels into one method has been proposed and drawn considerable attention. The integration of two sensing signals not only promotes the analytical efficiency with reduced assumption, but also improves the analytical performances with enlarged detection linear range, enhanced accuracy, and boosted application flexibility. The two top-rated output signals for developing dual-modal sensors are colorimetric and fluorescent signals because of their outstanding merits for point of care applications and real-time sensitive sensing. Given the rapid development of material chemistry and nanotechnology, the recent decade has witnessed great advance in colorimetric/fluorimetric signal based dual-modal sensing technologies. The new sensing strategy leads to a broad avenue for various applications in disease diagnosis, environmental monitoring and food safety because of the complementary and synergistic effects of the two output signals. In this state-of-the-art review, we comprehensively summarize different types of colorimetric/fluorimetric dual-modal sensing methods by highlighting representative research in the last 5 years, digging into their sensing methodologies, particularly the working principles of the signal transduction systems. Then, the challenges and future prospects for boosting further development of this research field are discussed.

Visual pH Sensors: From a Chemical Perspective to New Bioengineered Materials

Many human activities and cellular functions depend upon precise pH values, and pH monitoring is considered a fundamental task. Colorimetric and fluorescence sensors for pH measurements are chemical and biochemical tools able to sense protons and produce a visible signal. These pH sensors are gaining widespread attention as non-destructive tools, visible to the human eye, that are capable of a real-time and in-situ response. Optical “visual” sensors are expanding researchers’ interests in many chemical contexts and are routinely used for biological, environmental, and medical applications. In this review we provide an overview of trending colorimetric, fluorescent, or dual-mode responsive visual pH sensors. These sensors include molecular synthetic organic sensors, metal organic frameworks (MOF), engineered sensing nanomaterials, and bioengineered sensors. We review different typological chemical entities of visual pH sensors, three-dimensional structures, and signaling mechanisms for pH sensing and applications; developed in the past five years. The progression of this review from simple organic molecules to biological macromolecules seeks to benefit beginners and scientists embarking on a project of pH sensing development, who needs background information and a quick update on advances in the field. Lessons learned from these tools will aid pH determination projects and provide new ways of thinking for cell bioimaging or other cutting-edge in vivo applications.

A bi-modal, cellulose-based sensor for fluorometric detection of Fe(III) and antimicrobial studies of its silver-loaded form

The study reports designing of a new, low-cost and environmentally friendly colorimetric and fluorometric sensor by using cellulose-based materials for detection and determination of Fe(III). To make powder cellulose (Cel) and filter paper (PCel) fluorescent, they were modified with hexamethylene diisocyanate (HMDI) and 4-sulfo-1,8-naphthalimide (Nap). Fluorescent Cel-Nap and PCel-Nap materials were used for spectroscopic detection of Fe(III). The working range of the designed sensor was determined as 1.0 × 10^-5-4.5 × 10^-5 M with a low limit of detection (LOD) (7.51 μM). Antimicrobial properties of cel-based compounds and Ag(I)-containing compounds were tested against five bacteria; Bacillus cereus, Streptococcus mutans, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and two fungi; Candida albicans and Candida tropicalis. The materials exhibited antimicrobial effects and their antifungal properties were more effective than their antibacterial properties.

Discriminating detection of dissolved ferrous and ferric ions using copper nanocluster-based fluorescent probe

Discrimination and detection of specific metal ions that belong to the same metallic element with different valence states in a complex matrix is challenging. In the present work, a fluorescence method using polyvinylpyrrolidone stabilized copper nanocluster (CuNCs@PVP) as a probe for discriminating detection of ferrous (Fe³⁺) and ferric (Fe²⁺) ions was developed. The CuNCs@PVP exhibited an excellent selective response to Fe³⁺ ions in contrast to Fe²⁺ ions and other metal ions when the pH value of solution was less than 4.0. Furthermore, the fluorescence of the CuNCs@PVP could be more sensitively quenched by Fe²⁺ ions by virtue of Fenton reaction. The different response of CuNCs@PVP towards Fe³⁺ and Fe²⁺ ions under different conditions offered the potential for the discriminating detection of Fe³⁺ and Fe²⁺ ions. Based on detailed optimization of detection conditions, an excellent linear relationship between the fluorescence quenching efficiency (F/F₀) of the CuNCs@PVP and the concentration of Fe³⁺ ions over the range of 0.4-20.0 μM and of Fe²⁺ ions in the range of 0.01-0.4 μM were obtained, respectively. The detection limits for the Fe³⁺ and Fe²⁺ ions were 0.14 μM and 0.008 μM, respectively. The developed probe showed good selectivity and presented an alternative strategy for discriminating detection of Fe³⁺ and Fe²⁺ ions in complex samples.

Distinctive detection of Fe2+ and Fe3+ by biosurfactant capped silver nanoparticles via naked eye colorimetric sensing

Distinctive detection of Fe²⁺ and Fe³⁺via naked eye colorimetic sensing.

Sensitive and visual detection of p-phenylenediamine by using dialdehyde cellulose membrane as a solid matrix

A novel method was developed for the sensitive and visual detection of p-phenylenediamine (PPD) via immobilizing the target specie PPD on dialdehyde cellulose membrane (DCM) followed by the reaction with salicylaldehyde. The obtained solid fluorescent membrane (S-PPD-DCM) emitted yellow fluorescence under 365 nm UV light. DCM was not only used as a solid matrix but also played a vital role in the enrichment of PPD. Experimental variables influencing the fluorescence signal were investigated and optimized. Under the optimum conditions, a detection limit of 5.35 μg L^-1 was obtained and two linear ranges were observed at 10-100 and 100-1000 μg L^-1, respectively. Moreover, the fluorescence of the resultant membrane can still be visualized by naked eye when PPD concentration was 50 μg L^-1. The detection of PPD was hardly affected by the coexistence of 1 mg L^-1 of o-phenylenediamine, m-phenylenediamine or phenylamine, exhibiting good selectivity. The developed method involved in a two-step Schiff base reaction and enhanced the fluorescence emission via blocking nonradiative intramolecular rotation decay of the excited molecules. It was applied to determine the PPD in spiked hair dye with satisfactory results.

A Coumarin-Based Fluorescent Probe for Ratiometric Detection of Cu2+ and Its Application in Bioimaging

The fluorescent probe L, based on naphthalimide-modified coumarin, was designed, synthesized, and characterized, which could recognize Cu2+ from other cations selectively and sensitively in HEPES buffer (10 mM, Ph = 7. 4)/CH3CN (1:4, V/V). When the probe L interacted with Cu2+, the color and the fluorescent intensity changed obviously and it provided the naked-eye detection for Cu2+. The recognition mode between them was achieved by Job's plot, IR, MS, SEM, and 1HNMR. In addition, test strips made from L could still interact with Cu2+ in tap water effectively. The limit of detection (LOD) of L was 3.5 × 10-6 M. Additionally, the density functional theory (DFT) calculation method was used to analyze the action mechanism of L toward Cu2+. Importantly, the fluorescent probe L could demonstrate favorable selectivity toward Cu2+ in Caenorhabditis elegans. Thus, L was considered to have some potential for application in bioimaging.

Development of Biopolymer and Conducting Polymer-Based Optical Sensors for Heavy Metal Ion Detection

Great efforts have been devoted to the invention of environmental sensors as the amount of water pollution has increased in recent decades. Chitosan, cellulose and nanocrystalline cellulose are examples of biopolymers that have been intensively studied due to their potential applications, particularly as sensors. Furthermore, the rapid use of conducting polymer materials as a sensing layer in environmental monitoring has also been developed. Thus, the incorporation of biopolymer and conducting polymer materials with various methods has shown promising potential with sensitively and selectively toward heavy metal ions. In this feature paper, selected recent and updated investigations are reviewed on biopolymer and conducting polymer-based materials in sensors aimed at the detection of heavy metal ions by optical methods. This review intends to provide sufficient evidence of the potential of polymer-based materials as sensing layers, and future outlooks are considered in developing surface plasmon resonance as an excellent and valid sensor for heavy metal ion detection.

Cascade Chromogenic System with Exponential Signal Amplification for Visual Colorimetric Detection of Acetone

The signal of the traditional chromogenic systems is directly proportional to analyte concentration, leading to an unsatisfactory sensitivity. Herein, we report a cascade chromogenic system to realize exponential amplification of colorimetric signal through coupling chemical oxidation with photoinduced radical chain reaction. The chemical oxidation of o-phenylenediamine (OPD) by Fe³⁺ generates Fe²⁺ and photoactive 2,3-diaminophenazine (DAP). Under blue-light irradiation, DAP initiates the formation of holes and H₂O₂ that reacts with Fe²⁺ to hydroxyl radicals (·OH) and Fe³⁺ via an intersystem crossing (ISC) process. Moreover, the holes oxidize water to yield ·OH as well. The resulting ·OH and regenerated Fe³⁺ in turn oxidize OPD to yield more DAP, leading to a self-propagating reaction cycle that continues to proceed until all the OPD molecules are consumed, along with a distinct color change from colorless to yellow. Through the generation of the complex between DAP and acetone that limits the ISC process, and therefore quenches the colorimetric signal, the highly sensitive and selective naked-eye detection of acetone is achieved from 50 μM to 3 mM, with a limit of detection of 35 μM. Additionally, the feasibility of this colorimetric assay to detect acetone in real water samples is also demonstrated.

Cellulose-based fluorescent sensor for visual and versatile detection of amines and anions

It is practical and challenging to construct ultrasensitive and multi-responsive sensors for visual and real-time monitoring of the environment. Herein, a cellulose-based multi-responsive fluorescent sensor (Phen-MDI-CA) is fabricated, and realizes a visual and ultrasensitive detection of not only various amines but also three anions based on the change of the fluorescence and/or visible colors. Once exposure to various amines in both the solution and vapor state, the Phen-MDI-CA solution and test paper exhibit different fluorescence colors, which can be used to distinguish triethylamine, ethylenediamine, methylamine, aniline, hydrazine and pyrrolidine from other amines. Moreover, via combining the Phen-MDI-CA with the Phen-MDI-CA/malachite green ratiometric system, phosphate (PO₄^3-), carbonate (CO₃^2-) and borate (B₄O₇^2-) can be visually and accurately recognized depending on the change of the visible and fluorescence colors. In fluorescent mode, the LOD for B₄O₇^2-, PO₄^3- and CO₃^2- ions is as low as 0.18 nmol, 0.69 nmol and 0.86 nmol, respectively. Significantly, the Phen-MDI-CA can readily make a qualitative and quantitative detection of B₄O₇^2-, PO₄^3- and CO₃^2- anions in the mixture of anions. The state-of-the-art responsive behavior of Phen-MDI-CA originates from the amplification effect of cellulose polymer chain and the differentiated interactions between the sensor and analytes.

A robust 3D In–MOF with an imidazole acid ligand as a fluorescent sensor for sensitive and selective detection of Fe3+ ions

A stable In(iii)-MOF with a versatile 5-(1H-imidazol-1-yl)isophthalic acid ligand can be used as a fluorescent sensor for Fe³⁺ detection.

Sunlight-Driven Wearable and Robust Antibacterial Coatings with Water-Soluble Cellulose-Based Photosensitizers

Herein, a simple, effective, and general strategy is demonstrated to obtain a water-soluble and nontoxic cellulose-based photosensitizer (CPS) with enhanced photodynamic antibacterial activity through introducing protoporphyrin IX (PpIX) and quaternary ammonium salt (QAS) groups onto the cellulose backbone. The synergistic effect of the anchoring and diluting effect of the cellulose backbone and the electrostatic repulsion between QAS groups effectively inhibit the π-π stacking of PpIX groups, thus the as-prepared CPS exhibits markedly enhanced reactive oxygen species (ROS) yield. Meanwhile, the positively charged QAS groups endow the CPS with water-solubility and a strong attractive force to bacteria. As a result, the CPS can rapidly and efficiently kill drug-resistant bacteria strains, including E. coli and S. aureus, with a low light dose (2.4 J cm^-2 ) and low concentration of PpIX groups (0.35 × 10^-6 m). Benefiting from the excellent processability and formability, the CPS is readily applied as a sunlight-driven wearable and robust antibacterial coating by a spray coating and later crosslinking procedure.

Amine-responsive cellulose-based ratiometric fluorescent materials for real-time and visual detection of shrimp and crab freshness

Herein, we design and prepare cellulose-based ratiometric fluorescent materials with superior amine-response, which offers the real-time and visual detection of seafood freshness. Through utilizing the reactive hydroxyl groups along cellulose chains, we covalently immobilize the fluorescein isothiocyanate (FITC) as indicator and protoporphyrin IX (PpIX) as internal reference onto cellulose acetate (CA), respectively. Subsequently, a series of dual-emission solid fluorescent materials are achieved by simply blending green emitting CA-FITC with red-emitting CA-PpIX with varying ratios. They exhibit a sensitive, color-responsive, rapid and linear response to ammonia in a wide range of 5.0 ppm to 2.5 × 104 ppm. Benefiting from the excellent solubility and processibility of cellulose derivatives, the as-prepared materials are readily processed into different material forms, including printing ink, coating, flexible film, and nanofibrous membrane. The electrospun nanofibrous membrane is successfully employed as a low-cost, high-contrasting, quick-responsive fluorescent trademark for visual monitoring the freshness of shrimp and crab.

Visual and Precise Detection of pH Values under Extreme Acidic and Strong Basic Environments by Cellulose-Based Superior Sensor

Precise determination of pH values with an instrument-free mode is challenging and practical in industry processes, life science, and environmental monitoring. Here, taking advantage of the intramolecular charge transfer process, we construct a cellulose-based superior pH sensor, Phen-MDI-CA, which contains a highly sensitive, pH-responsive, and extended conjugation structure by combining phenanthroline moiety as a chromophore with urea group as a bridge. The resultant Phen-MDI-CA can precisely and visually determine pH values under extreme acidic and strong basic environments, depending on the different colors. In visible light mode, Phen-MDI-CA can readily discriminate the pH values of 14.0, 13.0, 12.0, and 11.0 and distinguish pH 2.0 from 1.0 by the naked eye. In fluorescent mode, Phen-MDI-CA can recognize more accurate pH values of pH 11.6-13.2 at a 0.2-0.4 pH interval by the high-contrasting color change. After addition of pH-irresponsive dyes as the reference, the corresponding ratiometric systems exhibit different colors at a 0.2-0.4 pH interval during the pH values of 11.0-14.0 and 1.0-2.0. Benefiting from the excellent formability, the Phen-MDI-CA was readily fabricated into pH test strips by coating method. To our knowledge, this is the first study to monitor extreme acidity and strong basicity in such precise pH values with an instrument-free mode.

A chitosan-based fluorescent hydrogel for selective detection of Fe2+ ions in gel-to-sol mode and turn-off fluorescence mode

A novel chitosan-based fluorescent hydrogel has been synthesized by chemically bonding terpyridine-bearing aldehydes onto chitosan via an acid condensation reaction.

Ligand Impact on Monolayer Electrochromic Material Properties

In this study, we present a range of efficient highly durable electrochromic materials that demonstrate excellent redox and lifetime stability, sufficient coloration contrast ratios, and the best-in-class electron-transfer constants. The materials were formed by anchoring as little as a monolayer of predefined iron complexes on a surface-enhanced conductive solid support. The thickness of the substrate was optimized to maximize the change in optical density. We demonstrate that even a slight change in molecular sterics and electronics results in materials with sufficiently different properties. Thus, minor changes in the ligand design give access to materials with a wide range of color variations, including green, purple, and brown. Moreover, ligand architecture dictates either orthogonal or parallel alignment of corresponding metal complexes on the surface due to mono- or bis-quaternization. We demonstrate that monoquaternization of the complexes during anchoring to the surface-bound template layer results in redshifts of the photoabsorption peak. The results of in-solution bis-methylation supported by density functional theory calculations show that the second quaternization may lead to an opposite blueshift (in comparison with monomethylated analogs), depending on the ligand electronics and the environmental change. It is shown that the variations of the photoabsorption peak position for different ligands upon attachment to the surface can be related to the calculated charge distribution and excitation-induced redistribution. Overall, the work demonstrates a well-defined method of electrochromic material color tuning via manipulation of sterics and electronics of terpyridine-based ligands.