Core-Shell Au@Metal-Organic Frameworks for Promoting Raman Detection Sensitivity of Methenamine

Recent advances of MOF-based SERS substrates in quantitative analysis of food contaminants: a review

Advancements in food-contaminant detection technologies can significantly improve food safety and human health. Surface-enhanced Raman spectroscopy (SERS) has become the preferred analytical method for food-safety detection owing to its numerous advantages, which include unique 'molecular fingerprinting' features, high sensitivity, rapid responses, and non-invasive characteristics. Raman-signal enhancements rely heavily on high-performance SERS substrates. In recent years, metal-organic framework (MOF)-based SERS substrates have gained attention as promising candidates for developing SERS technologies owing to their distinctive structures and functions. This review comprehensively examines recent advances in MOF-based SERS substrates, focusing on the main role of MOFs in SERS substrates as well as their typical categories and structures, construction methods, and representative applications in food-contaminant detection. First, the primary roles of MOFs in SERS substrates are briefly introduced. Next, a comprehensive overview of the typical categories and structures of MOF-based SERS substrates is discussed. Subsequently, a fundamental view of the general construction methods for MOF-based SERS substrates is presented. Next, the main applications of MOF-based SERS substrates for food-contaminant detection are summarised. Finally, challenges and perspectives, including improvements in SERS performance and stability, and the unification of SERS mechanisms, are addressed and discussed.

Multifunctional SERS Substrate for Simultaneous Detection of Multiple Contaminants and Photothermal Removal of Pathogenic Bacteria

In this work, a boric-acid-modified Fe3O4@Au@BA-MOF composite material as a multifunctional SERS substrate was ingeniously constructed for detecting both pathogens and antibiotics as well as photothermally inactivating the pathogens. Through improving the dispersity and stability of gold nanoparticles (Au NPs), leveraging the specificity of boric acid (BA) groups in recognizing cis-diol structures, and the ability of SERS technology to provide unique fingerprint spectra of targets, the sensitive and stable detection of pathogens and antibiotics was achieved. Compared with Au NPs and Fe3O4@Au, the SERS enhancement factor of Fe3O4@Au@BA-MOF was 4.31 × 106, which was about 400 times and 16 times higher than the former two, respectively. Among the existing work, the limit of detection for pathogens was lower or comparable, and it exhibited good stability, maintaining consistent performance for 23 days. Additionally, this substrate achieved efficient photothermal inactivation of pathogens under both near-infrared light and natural light excitation. Within 8 min of near-infrared light irradiation, the bactericidal rates for Staphylococcus aureus and Escherichia coli reach 100% and 99.3%, respectively.

Ultrasensitive detection strategy for CAP by molecularity imprinted SERS sensor based on multiple synergistic enhancement of SiO2@AuAg with MOFs@Au signal carrier

Chloramphenicol (CAP) residue in food can cause great harm to human health, it is important to develop a rapid and sensitive method to detect CAP. Here, molecularly imprinted polymer (MIP) was combined with metal-organic frameworks@Au (MOFs@Au) collaborative construction surface-enhanced Raman spectroscopy (SERS) based aptasensor for CAP ultrasensitive detection. MOFs@Au first carried the Raman signal molecule toluidine blue (TB) and aptamer to form MOFs@Au@TB@Apt. In addition, rMIP (CAP was removed) was dropped onto the uniform three-dimensional (3D) SERS substrate SiO2@AuAg to form SiO2@AuAg@rMIP. In the presence of target CAP, it could be specifically captured with rMIP by covalent interaction and was recognised by the aptamer. During this time, SiO2@AuAg@rMIP@CAP could selectively connect MOFs@Au@TB@Apt to realise synergistic enhance the Raman signal. Based on this principle, the proposed SERS aptasensor exhibits excellent sensitivity with a detection limit of 7.59×10-13 M for CAP, providing a new strategy for trace detection in food.

Ag@Au core-shell nanoparticle-based surface-enhanced Raman scattering coupled with chemometrics for rapid determination of chloramphenicol residue in fish

The alarming increase in drug-resistant bacteria in fish resulting from the misuse of antibiotics poses a significant threat to ecosystems and human health. Therefore, the development of a reliable approach for detecting antibiotic residues in fish is crucial. In this study, a rapid and simple method for detecting chloramphenicol (CAP) residue in tilapia was developed using surface-enhanced Raman scattering (SERS) combined with chemometric algorithms. Silver and gold core-shell nanoparticles (Ag@Au CSNPs) were used as SERS nanosensors to achieve strong signal amplification with an enhancement factor of 2.67 × 106. The results demonstrated that the variable combination population analysis-partial least square (VCPA-PLS) model combined with the standard normal variable transformation pretreatment method exhibited the best predictive performance with a detection limit of 1 × 10-5 µg/mL. Thus, an SERS technique was established based on Ag@Au CSNPs combined with VCPA-PLS to rapidly detect CAP in tilapia.

A versatile SERS platform based on conductive MOF-enforced carbon paper for rapidly and sensitively monitoring diazepam in aquatic products

Herein, a versatile surface enhanced Raman scattering (SERS) platform was firstly constructed by integrating conductive metal organic framework (CMOF) with controlled electrodeposition of Au nanoparticles (Au NPs) on flexible carbon paper (CP-CMOF@Au) for sensitively recognizing diazepam (DZP) in aquatic products. The CMOF not only provided a pre-concentration effect for boosting sensitivity, but also dramatically improved the intrinsic electrical conductivity contributing to homogeneous distribution of Au NPs and forming SERS-active "hot spot" with superior stability and reproducibility. Based on CP-CMOF@Au chip, DZP can be sensitively detected with low limit of detection of 0.64 ng mL-1 and wide linear detection range from 0.001 to 10 μg mL-1. Also, DZP in aquatic products can be collected and recognized using multiple approaches (drip coating, soaking and wiping) with excellent reusability and satisfactory recovery of 85.8-103.3%. This method would provide an ingenious SERS strategy for rapidly monitoring DZP in aquatic products with good practical applicability.

Identification and Detection of Intracellular Reactive Sulfur Species Using a Reaction-Mediated Dual-Recognition Strategy

Reactive sulfur species (RSS) are emerging as a potential key gasotransmitter in diverse physiological processes linking two signaling molecules H2S and SO2. However, the exact roles of H2S and SO2 remain unclear. A major hurdle is the shortage of accurate and robust approaches for sensing of H2S and SO2 in biological systems. Herein, we report a reaction-mediated dual-recognition strategy-based nanosensor, silver nanoparticles (AgNPs)-loaded MIL-101 (Fe) (ALM) hybrids, for the simultaneous detection of H2S and SO2 in a living cell. Upon exposure to H2S, AgNPs can be oxidized to form Ag2S, causing a decrease of surface enhanced Raman spectroscopy (SERS) signals of p,p'-dimercaptoazobenzene. Moreover, SO2 reacts with the amino moiety of MIL-101 to form charge-transfer complexes, resulting in an increment of fluorescent (FL) intensity. The ALM with dual-modal signals can simultaneously analyze H2S and SO2 at a concentration as low as 2.8 × 10-6 and 0.003 μM, respectively. Most importantly, the ALM sensing platform enables targeting mitochondria and detection multiple RSS simultaneously in living cells under external stimulation, as well as displays indiscernible crosstalk between SERS and FL signals, which is very beneficial for the comprehension of physiological issues related with RSS.

Surface ligand-assisted synthesis and biomedical applications of metal-organic framework nanocomposites

Metal-organic framework (MOF) nanocomposites have recently gained intensive attention for biosensing and disease therapy applications owing to their outstanding physiochemical properties. However, the direct growth of MOF nanocomposites is usually hindered by the mismatched lattice in the interface between the MOF and other nanocomponents. Surface ligands, molecules with surfactant-like properties, are demonstrated to exhibit the robust capability to modify the interfacial properties of nanomaterials and can be utilized as a powerful strategy for the synthesis of MOF nanocomposites. Besides this, surface ligands also exhibit significant functions in the morphological control and functionalization of MOF nanocomposites, thus greatly enhancing their performance in biomedical applications. In this review, the surface ligand-assisted synthesis and biomedical applications of MOF nanocomposites are comprehensively reviewed. Firstly, the synthesis of MOF nanocomposites is discussed according to the diverse roles of surface ligands. Then, MOF nanocomposites with different properties are listed with their applications in biosensing and disease therapy. Finally, current challenges and further directions of MOF nanocomposites are presented to motivate the development of MOF nanocomposites with elaborate structures, enriched functions, and excellent application prospects.

Recent Progress in the Application of Metal Organic Frameworks in Surface-Enhanced Raman Scattering Detection

Metal-organic framework (MOF) compounds are centered on metal ions or metal ion clusters, forming lattices with a highly ordered periodic porous network structure by connecting organic ligands. As MOFs have the advantages of high porosity, large specific surface area, controllable pore size, etc., they are widely used in gas storage, catalysis, adsorption, separation and other fields. SERS substrate based on MOFs can not only improve the sensitivity of SERS analysis but also solve the problem of easy aggregation of substrate nanoparticles. By combining MOFs with SERS, SERS performance is further improved, and tremendous research progress has been made in recent years. In this review, three methods of preparing MOF-based SERS substrates are introduced, and the latest applications of MOF-based SERS substrates in biosensors, the environment, gases and medical treatments are discussed. Finally, the current status and prospects of MOF-based SERS analysis are summarized.

Fabrication of a metal organic framework (MOF)-modified Au nanoparticle array for sensitive and stable SERS sensing of paraquat in cereals

A high-performance Au@MIL-101/PMMA/DT surface-enhanced Raman scattering (SERS) substrate was fabricated for sensitive and stable detection of paraquat by self-assembling metal organic framework-modified Au nanoparticles (Au@MIL-101) on a poly(methyl methacrylate) (PMMA) film and then immobilizing the formed substrate onto a duct tape (DT). The highly closely packed Au@MIL-101 array provided intensive hotspots for SERS sensing. The MIL-101 layer modified on the surface of Au nanoparticles could absorb paraquat to the electromagnetic enhancement area of Au nanoparticles. The DT on the bottom made the substrate smoother, which is beneficial for achieving a more stable detection performance. As a result, the constructed substrate exhibited outstanding uniformity with relative standard deviations of 9.47% and storage stability for 2 months. For detecting paraquat, the substrate showed a low detection limit of 7.1 × 10^-9  M (1.83 µg/kg) and wide linear range from 10^-8 to 10^-2  M. Furthermore, the substrate showed good detection performance in real cereal samples with desirable recovery rates from 91.57% to 102.32%.

Controllable synthesis of flower-like AuNFs@ZIF-67 core-shell nanocomposites for ultrasensitive SERS detection of histamine in fish

Histamine is a significant biomarker to assess the freshness of fish products. In this study, a novel MOF-based SERS sensor for histamine determination was synthesized by wrapping PVP-capped Au nanoflowers with a ZIF-67 shell (Au NFs@ZIF-67). The highly branched Au NFs core exhibited a strong electromagnetic field enhancement effect and provided an ultra-sensitive SERS fingerprint spectrum, while ZIF-67 shell was the contributor to enrich the target and stabilize the substrate. The morphology of the core-shell structures can be easily controlled by the concentrations of the capping agent PVP and MOF precursor Co ion. Consequently, 4-MBA pre-grafted on the optimized SERS substrate can act as the Raman internal standard (IS) to eliminate signal fluctuations through standardizing all spectra against its peak at 1074 cm^-1. Moreover, as the specific receptor for histamine molecules, 4-MBA helped reach the low detection sensitivity, where the SERS intensity ratio, I₁₁₇₂/I₁₀₇₄ presented a good linear relationship towards the histamine concentrations (10^-3-10^-7 M) with the LOD of 0.87 × 10^-7 M (R² = 0.9930). Furthermore, the application in monitoring fish spoilage process demonstrated the feasibility and reliability of the developed sensor. This work provided a facile strategy to construct MOF-based SERS substrate as a potential platform for the shelf-life prediction of fish products.

Metal-organic frameworks based surface-enhanced Raman spectroscopy technique for ultra-sensitive biomedical trace detection

Metal-organic frameworks (MOFs) have attracted widespread interest due to their unique and unprecedented advantages in microstructures and properties. Besides, surface-enhanced Raman scattering (SERS) technology has also rapidly developed into a powerful fingerprint spectroscopic technique that can provide rapid, non-invasive, non-destructive, and ultra-sensitive detection, even down to single molecular level. Consequently, a considerable amount of researchers combined MOFs with the SERS technique to further improve the sensing performance and broaden the applications of SERS substrates. Herein, representative synthesis strategies of MOFs to fabricate SERS-active substrates are summarized and their applications in ultra-sensitive biomedical trace detection are also reviewed. Besides, relative barriers, advantages, disadvantages, future trends, and prospects are particularly discussed to give guidance to relevant researchers.

Ultrasensitive and rapid colorimetric detection of urotropin boosted by effective electrostatic probing and non-covalent sampling

Leakage and contamination of hazardous chemical substances have been widely recognized as the critical issue in ensuring human health, maintaining environmental sustainability, and safeguarding public security. Urotropin as a crucial raw material in industrial holds a potential threat to aquatic/atmospheric environment with refractory degradation problem, hence, there remains a severe challenge to effectively and on-site monitor urotropin. Here, a general design with all-in-one strategy was presented, in which a highly integrated "pocket sensing chip" combining a sampling unit and a detecting unit together endows a rapid and ultrasensitive colorimetric detection without dead-zone towards urotropin. By loading fast blue B as sensing reagent in the detecting unit, a moderate and sensitive detection towards urotropin via electrostatic interaction was achieved with detection limits of 9 μM for liquid and 17.19 ng for particulates. Furthermore, an expandable sensing chip for the purpose of simultaneously screening on multi-target exhibited remarkable applicability for examining suspicious objects with all sorts of surface in real scenes, being unacted on environmental complexity. We expect this design would provide a universal strategy and the high referential value to propel the development of handy and portable sensing device to efficiently screen the environmental relevant critical substance on-site.

New Trends in Nanoarchitectured SERS Substrates: Nanospaces, 2D Materials, and Organic Heterostructures

This article reviews recent fabrication methods for surface-enhanced Raman spectroscopy (SERS) substrates with a focus on advanced nanoarchitecture based on noble metals with special nanospaces (round tips, gaps, and porous spaces), nanolayered 2D materials, including hybridization with metallic nanostructures (NSs), and the contemporary repertoire of nanoarchitecturing with organic molecules. The use of SERS for multidisciplinary applications has been extensively investigated because the considerably enhanced signal intensity enables the detection of a very small number of molecules with molecular fingerprints. Nanoarchitecture strategies for the design of new NSs play a vital role in developing SERS substrates. In this review, recent achievements with respect to the special morphology of metallic NSs are discussed, and future directions are outlined for the development of available NSs with reproducible preparation and well-controlled nanoarchitecture. Nanolayered 2D materials are proposed for SERS applications as an alternative to the noble metals. The modern solutions to existing limitations for their applications are described together with the state-of-the-art in bio/environmental SERS sensing using 2D materials-based composites. To complement the existing toolbox of plasmonic inorganic NSs, hybridization with organic molecules is proposed to improve the stability of NSs and selectivity of SERS sensing by hybridizing with small or large organic molecules.

Highly catalysis amplification of MOFNd-loaded nanogold combined with specific aptamer SERS/RRS assay of trace glyphosate

A neodymium metal-organic framework (MOFNd) was prepared using 1H-pyrazole-3,5-dicarboxylic acid (H3pdc) and 2-pyrazinecarboxylic acid as ligands. Through the addition of HAuCl4 as a precursor and NaBH4 as a reducing agent, a new MOFNd-loaded nanogold (AuNPs) (Au@MOFNd) nanosol with good stability and high catalytic activity was conveniently prepared via a solvothermal-reduction method and characterized. It was found that the indicator reaction of reducing HAuCl4 by Na2SO3 to generate AuNPs was slow. Au@MOFNd strongly catalyzes this nanoreaction, and the produced AuNPs exhibit a strong resonance Rayleigh scattering (RRS) peak at 370 nm, and a strong surface-enhanced Raman scattering (SERS) peak at 1617 cm-1 with the addition of the molecular probe Victoria blue 4R (VB4r). A novel SERS/RRS di-mode quantitative analysis method for glyphosate (GLY) was established by coupling this new Au@MOFNd catalytic indicator reaction with the aptamer (Apt) reaction of GLY, with SERS and RRS detection limits of 0.02 nM and 0.3 nM, respectively. It has been applied to the analysis of soil samples with a recovery rate of 93.0%-106.5% and precision of 2.2%-4.1%, and the results were satisfactory.

A metal-organic framework with rich accessible nitrogen sites for rapid dye adsorption and highly efficient dehydrogenation of formic acid

MOFs with adequate free nitrogen sites have potential applications in dye adsorption and formic acid dehydrogenation. Here, we successfully synthesized a novel 3-D MOF 1 ([(CH₃)₂NH₂][Cd(L)DMA]·0.5DMA·1.5H₂O) with a special two-fold interpenetrating framework through a simple solvothermal reaction between CdCl₂·1.5H₂O and a nitrogen-rich triangular tricarboxylate-based linker (H₃L, 4,4',4''-s-triazine-2,4,6-tribenzoic acid). After removing the guest molecules of dimethylacetamide (DMA) and H₂O, including the coordinated DMA from 1 by vacuum activation at 423 K, a compound named 1' with a formula of [(CH₃)₂NH₂][Cd(L)] and a similar interpenetrating framework structure was obtained. In comparison with compound 1, the total void volume of 1' is nearly doubled, and thus may provide higher potential for the adsorption of other guest molecules. Notably, the pyridine N atoms located in the middle of the triangular tricarboxylate-based linker are not involved in the coordination with Cd²⁺, and are all uniformly dispersed throughout the whole framework of the 3-D MOFs. Due to its unique structural features, the 3-D MOF 1' could effectively adsorb the cationic dye MB⁺ for recycling purposes. The rapid adsorption rate (0.7 × 10^-2 g mg^-1 min^-1) and the relatively high capacity (900 mg g^-1) for MB⁺ demonstrate the potential of 1' in dye adsorption. In addition, 1' may also be used as an effective support to immobilize PdAu NPs via the double-solvent method. The resultant catalyst Pd0.8Au0.2/1' exhibits decent catalytic activity for the dehydrogenation of formic acid with a TOF value of 1854 h^-1 at 333 K. The existence of a large void volume and accessible pyridine N atoms provide a suitable environment for achieving a high dispersion of PdAu NPs, thereby leading to the formation of a catalytically active and stable supported noble-metal NP catalyst for H₂ generation from formic acid decomposition.

SERS determination of dopamine using metal-organic frameworks decorated with Ag/Au noble metal nanoparticle composite after azo derivatization with p-aminothiophenol

A specific surface-enhanced Raman scattering (SERS) assay for dopamine (DA) based on an azo derivatization reaction is proposed for the first time by preparation of p-aminothiophenol (PATP)-modified composite SERS substrate, composed of metal-organic framework (MIL-101) decorated with Au and Ag nanoparticles. As the result, the SERS method for detection of the azo reaction between PATP and DA exhibits superior sensitivity, selectivity, and stability. A reasonable linearity in the range 10^-6 to 10^-10 mol∙L^-1 is achieved, and the limit of detection is 1.2 × 10^-12 mol∙L^-1. The reactive SERS assay is free from interference in complex physiological fluid. The feasibility of the proposed SERS method for the detection of DA levels in fetal bovine serum (FBS) samples and human serum samples is validated by HPLC-MS methods, displaying promising application potential in early disease diagnosis.

Explaining chemical clues of metal organic framework-nanozyme nano-/micro-motors in targeted treatment of cancers: benchmarks and challenges

Nowadays, nano-/micro-motors are considered as powerful tools in different areas ranging from cleaning all types of contaminants, to development of Targeted drug delivery systems and diagnostic activities. Therefore, the development and application of nano-/micro-motors based on metal-organic frameworks with nanozyme activity (abbreviated as: MOF-NZs) in biomedical activities have received much interest recently. Therefore, after investigating the catalytic properties and applications of MOF-NZs in the treatment of cancer, this study intends to point out their key role in the production of biocompatible nano-/micro-motors. Since reducing the toxicity of MOF-NZ nano-/micro-motors can pave the way for medical activities, this article examines the methods of making biocompatible nanomotors to address the benefits and drawbacks of the required propellants. In the following, an analysis of the amplified directional motion of MOF-NZ nano-/micro-motors under physiological conditions is presented, which can improve the motor behaviors in the propulsion function, conductivity, targeting, drug release, and possible elimination. Meanwhile, by explaining the use of MOF-NZ nano-/micro-motors in the treatment of cancer through the possible synergy of nanomotors with different therapies, it was revealed that MOF-NZ nano-/micro-motors can be effective in the treatment of cancer. Ultimately, by analyzing the potential challenges of MOF-NZ nano-/micro-motors in the treatment of cancers, we hope to encourage researchers to develop MOF-NZs-based nanomotors, in addition to opening up new ideas to address ongoing problems.

Synthesis of an organic phosphoric acid-based multilayered SERS imprinted sensor for selective detection of dichlorophenol

A novel SERS imprinted sensor (AIM@MIPs) was prepared, which could improve the detection ability of analysis detection. The AIM@MIPs presented sensitive and selective detection property to 2,6-DCP.

Au@ZIF-8 Core-Shell Nanoparticles as a SERS Substrate for Volatile Organic Compound Gas Detection

Surface-enhanced Raman spectroscopy (SERS) is a promising ultrasensitive analysis technology due to outstanding molecular fingerprint identification. However, the measured molecules generally need to be adsorbed on a SERS substrate, which makes it difficult to detect weakly adsorbed molecules, for example, the volatile organic compound (VOC) molecules. Herein, we developed a kind of a SERS detection method for weak adsorption molecules with Au@ZIF-8 core-shell nanoparticles (NPs). The well-uniformed single- and multicore-shell NPs can be synthesized controllably, and the shell thickness of the ZIF-8 was able to be precisely controlled (from 3 to 50 nm) to adjust the distance and electromagnetic fields between metal nanoparticles. After analyzing the chemical and physical characterization, Au@ZIF-8 core-shell NPs were employed to detect VOC gas by SERS. In contrast with multicore or thicker-shell nanoparticles, Au@ZIF-8 with a shell thickness of 3 nm could efficiently probe various VOC gas molecules, such as toluene, ethylbenzene, and chlorobenzene. Besides, we were capable of observing the process of toluene gas adsorption and desorption using real-time SERS technology. As observed from the experimental results, this core-shell nanostructure has a promising prospect in diverse gas detection and is expected to be applied to the specific identification of intermediates in catalytic reactions.

AgNPs and MIL-101(Fe) self-assembled nanometer materials improved the SERS detection sensitivity and reproducibility

Recently, in the research of Surface-enhanced Raman scattering (SERS) technology, it is found that the preparation of enhanced substrate is particularly important. In this work, the most commonly used methods were used to synthesize AgNPs and MIL-101(Fe), and AgNPs/MIL-101(Fe) nanocomposite was obtained through self-assembly of the two substances. Four different probe molecules were detected with the self-assembled substrate and compared with the results of same probe molecules with AgNPs and MIL-101(Fe) as SERS substrate separately, it was found that AgNPs/ MIL-101 (Fe) nanocomposites had a strong enhancing effect as SERS substrate. The Enhancement Factor (EF) value of 10^-6 mol/L Rhodamine 6G (R6G) was calculated as 2.09 × 10⁹, and the Raman intensities of the peak relative standard deviation (RSD) of R6G Raman attribution was calculated as 7.55%. The time stability of the material was studied and it was found that the reduced Raman signal and poor reproducibility were due to the AgNPs placement time. AgNPs/ MIL-101 (Fe) nanocomposites were used as SERS substrate to detect Paraquat with a minimum concentration of 10^-12 mol/L. The signal values of Paraquat Raman detected at 10^-6 mol/L in different pH environments were relatively stable.

Ultrathin ZIF-8 wrapping on Au-dotted Ag-nanowires for highly selective SERS-based CO2 gas detection

Ultrathin ZIF-8 wrapping was constructed on Au-dotted Ag-nanowires to obtain Ag@Au@ZIF-8. A thin film (Ag@Au@ZIF-8 NWs/TF) was constructed to selectively adsorb and enrich CO2 molecules, which solved the problem that SERS signals could not be detected due to the poor affinity of the metal surface and the low concentration of gas molecules.

ZIF-8-modified Au-Ag/Si nanoporous pillar array for active capture and ultrasensitive SERS-based detection of pentachlorophenol

A novel SERS substrate based on a zeolitic imidazolate framework-8 (ZIF-8) film-modified Au-Ag/Si nanoporous pillar array (ZIF-8/Au-Ag/Si-NPA) was successfully fabricated for pentachlorophenol (PCP) detection. The Au-Ag/Si-NPA was synthesized through immersion plating and replacement reaction on the Si-NPA, which was prepared by the hydrothermal etching. The ZIF-8 film was coated via layer-by-layer growth technique. The ZIF-8 film is nanoporous and its thickness can be controlled by varying the growing number, which can significantly influence the SERS performance of the substrate. The substrate with optimal ZIF-8 thickness exhibited an excellent SERS response to PCP molecules. The SERS enhancement factor reached up to 1.8 × 10⁷ and the detection limit was down to 10^-13 M. Moreover, the substrate showed good uniformity with a relative standard deviation (RSD) of 8.7% and good selectivity. The PCP detection is hardly interfered by the coexisting organic compounds. The high SERS performance may be due to the enrichment effect of the ZIF-8 film. The ZIF-8 film could capture and enrich the trace PCP molecules by electrostatic interaction between the negatively charged PCP^- and the positively charged ZIF-8. This work suggests that the ZIF-8/Au-Ag/Si-NPA substrate has potential application in SERS analysis of the polar organic pollutant detection in environmental media.

Present and Future of Surface-Enhanced Raman Scattering

The discovery of the enhancement of Raman scattering by molecules adsorbed on nanostructured metal surfaces is a landmark in the history of spectroscopic and analytical techniques. Significant experimental and theoretical effort has been directed toward understanding the surface-enhanced Raman scattering (SERS) effect and demonstrating its potential in various types of ultrasensitive sensing applications in a wide variety of fields. In the 45 years since its discovery, SERS has blossomed into a rich area of research and technology, but additional efforts are still needed before it can be routinely used analytically and in commercial products. In this Review, prominent authors from around the world joined together to summarize the state of the art in understanding and using SERS and to predict what can be expected in the near future in terms of research, applications, and technological development. This Review is dedicated to SERS pioneer and our coauthor, the late Prof. Richard Van Duyne, whom we lost during the preparation of this article.

Spectroscopy, microscopy, diffraction and scattering of archetypal MOFs: formation, metal sites in catalysis and thin films

A comprehensive overview of characterization tools for the analysis of well-known metal–organic frameworks and physico-chemical phenomena associated to their applications.

Surface-enhanced Raman scattering-based detection of hazardous chemicals in various phases and matrices with plasmonic nanostructures

Surface-enhanced Raman scattering (SERS)-based sensors utilize the electromagnetic-field enhancement of plasmonic substrates with the chemical specificity of vibrational Raman spectroscopy to identify trace amounts of a wide variety of different target analytes while being minimally affected by photobleaching. However, despite many advantageous features of this method, SERS sensors, particularly for detecting hazardous chemicals, suffer from several limitations such as requirement of gigantic signal enhancement that is often poorly controllable, subtle change and degradation of the SERS substrate, consecutive fluctuation of the signal, the lack of reliable receptors for capturing targets of interest and the absence of general principles for detecting various chemicals in different phases and matrices. To overcome these limitations and for SERS sensors to find practical use, one must (1) acknowledge the characteristics of the matrices of target systems, (2) finely engineer and tune the receptors of the SERS sensor to properly extract the target analyte from the phase, and (3) implement additional mechanistic modifications to enhance the plasmonic signal. This minireview underlines the difficulties associated with different phases and a wide range of target analytes, and introduces the practical measures undertaken to overcome the respective difficulties in SERS-based detection of hazardous chemicals.

Sensitive and selective SERS probe for detecting the activity of γ-glutamyl transpeptidase in serum

γ-Glutamyl transpeptidase (GGT) has attracted considerable attention for its regulatory effect on glutathione metabolism in living organisms; further, its close relationship with physiological dysfunctions such as hepatitis and liver cancers has enhanced its applicability. Therefore, the accurate detection of GGT levels is particularly important for the early diagnosis of diseases. Thus, we herein report the development of a surface-enhanced Raman spectroscopic (SERS) probe, namely bis-s,s'-((s)-4,4'-thiolphenylamide-Glu) (b-(s)-TPA-Glu), that comprises of a γ-glutamyl moiety for detection of the GGT activity. In this system, detection was achieved by observing differences in the SERS spectral profiles of the b-(s)-TPA-Glu probe and its corresponding hydrolysis product that resulted from the catalytic action of GGT. This SERS probe system exhibited a high selectivity toward GGT due to a combination of its specific catalytic action and the distinctive spectroscopic fingerprint of the SERS technique. The developed SERS approach was also found to be approximately linear in the range of 0.2-200 U/L, and a limit of detection of 0.09 U/L was determined. Furthermore, the proposed SERS method was suitable for detection of the GGT activity of clinical serum samples and also for evaluation of the inhibitors of GGT. Consequently, this approach is considered to be a promising diagnostic and drug screening tool for GGT-associated diseases.

Metal-Organic Frameworks for Food Safety

Food safety is a prevalent concern around the world. As such, detection, removal, and control of risks and hazardous substances present from harvest to consumption will always be necessary. Metal-organic frameworks (MOFs), a class of functional materials, possess unique physical and chemical properties, demonstrating promise in food safety applications. In this review, the synthesis and porosity of MOFs are first introduced by some representative examples that pertain to the field of food safety. Following that, the application of MOFs and MOF-based materials in food safety monitoring, food processing, covering preservation, sanitation, and packaging is overviewed. Future perspectives, as well as potential opportunities and challenges faced by MOFs in this field will also be discussed. This review aims to promote the development and progress of MOF chemistry and application research in the field of food safety, potentially leading to novel solutions.

Metal-organic framework (MOF-5) coated SERS active gold gratings: A platform for the selective detection of organic contaminants in soil

In this work, we proposed the functionalization of a surface plasmon-polariton (SPP)-supported gold grating surface with the metal-organic framework (MOF-5) for sensitive, selective and reproducible surface-enhanced Raman scattering (SERS) detection of organophosphorus pesticides. Homogeneous distribution of plasmon intensity along the Au grating surface ensures the high reproducibility of SERS results (deviation of Raman peak intensity does not exceed the 4% along the sample). The surface-assisted growth of thin MOF-5 film was accomplished in two steps procedure: (i) covalent grafting by 4-carboxyphenyl groups and (ii) the immersion of samples in the mother liquid of MOF-5. Proposed SERS chip proved itself to be a perfect analytical probe for the detection of organophosphorus pesticides with high reliability and low detection limit up to 10^-12 M. Moreover, selective detection and recognition of several relevant organic contaminants (azo-dye, mycotoxin, and pesticide) from the simulated soil was successfully demonstrated. All SERS measurements were performed using portable Raman spectrometer and can easily be expanded to environmental conditions. Our work combines the high affinity of organic contaminants to the MOF-5 with excellent plasmonic excitation on the surface plasmon-polariton supported structure and shows the way to the realization of closed-to-ideal analytical SERS chip.

A green and general strategy for the synthesis of hollow Ag/CdS nanocomposites for superior SERS performance

In this study, we developed a convenient, environmentally friendly approach for the fabrication of hollow Ag/CdS composites, which presented superior SERS performance.