Hydrophobic Antifouling Electrospun Mats from Zwitterionic Amphiphilic Copolymers

Influence of zwitterionic amphiphilic copolymers on heterogeneous gypsum formation: A promising approach for scaling resistance

This study aims to investigate the influence of zwitterionic amphiphilic copolymers (ZACs) in the nucleation and growth of heterogeneous CaSO4 at the zwitterion-water interface, which is crucial for the prevention of mineral scaling and consequent downtime or suboptimal performance in industries like membrane desalination, heat exchangers, and pipeline transportation. In situ grazing incidence small angle X-ray Scattering (GISAXS), and quartz crystal microbalance with dissipation (QCM-D) techniques were used to analyze the evolution of CaSO4 particles on two new ZAC coatings: poly-(trifluoroethyl methacrylate-random-sulfobetaine methacrylate) (PTFEMA-r-SBMA, or PT:SBMA) and poly(trifluoroethyl methacrylate-random-2-methacryloyloxyethyl phosphorylcholine) (PTFEMA-r-MPC, or PT:MPC). The results showed that PT:MPC coatings promoted nucleation but inhibited crystal growth, resulting in slower overall reaction kinetics on PT:MPC coatings compared to PT:SBMA coatings. Interfacial interactions involving the substrates, sulfate minerals, and ions were examined, revealing that calcium ion adsorption, primarily governed by electrostatic attraction, played a crucial role in the nucleation and growth processes on both ZAC coatings. The crystal characterization revealed a phase transition from bassanite to gypsum on both ZAC coatings, suggesting that these zwitterionic materials can influence the mineral phase of heterogeneously formed CaSO4 crystals. These findings enhance our understanding of the fundamental mechanisms underlying heterogeneous CaSO4 scaling in the presence of zwitterionic materials.

Exploring the potential of an Aloe vera and honey extract loaded bi-layered nanofibrous scaffold of PCL-Col and PCL-SBMA mimicking the skin architecture for the treatment of diabetic wounds

Diabetic wounds are often chronic in nature, and issues like elevated blood sugar, bacterial infections, oxidative stress and persistent inflammation impede the healing process. To ensure the appropriate healing of wounds, scaffolds should promote complete tissue regeneration in wounds, both functionally and structurally. However, the available scaffolds lack the explicit architecture and functionality that could match those of native skin, thus failing to carry out the scar-free skin regeneration in diabetic wounds. This study deals with the synthesis of a bi-layered nanofibrous scaffold mimicking the native skin architecture in terms of porosity and hydrophobic-hydrophilic gradients. In addition, herbal extracts of Aloe vera and litchi honey were added in consecutive layers to manage the high blood glucose level, inflammation, and increased ROS level associated with diabetic wounds. In vitro studies confirmed that the prepared scaffold with herbal extracts showed enhanced proliferation of skin cells with good mechanical strength, degradability, anti-bacterial and anti-diabetic properties. The scaffold also demonstrated superior wound healing in vivo with quicker scar-free wound recovery and appropriate skin regeneration, compared to conventional treatment. Altogether, the synthesized herbal extract loaded bi-layered nanofibrous scaffold can be used as a regenerative template for hard-to-heal diabetic wounds, offering a new strategy for the management of chronic wounds.

Guardians of Future Food Safety: Innovative Applications and Advancements in Anti-biofouling Materials

Biofilm formation is a widespread natural phenomenon that poses a substantial threat to food microbiological safety, with direct implications for consumer health. To combat this challenge effectively, one promising strategy involves the development of functional anti-biofouling layers on food-contact surfaces to deter microbial adhesion. Herein, we explore the methodologies for fabricating both hydrophilic and hydrophobic anti-biofouling materials, along with a detailed examination of their inherent antiadhesive mechanisms. Furthermore, we provide concise insights into exemplary applications of anti-biofouling materials within the context of the food industry. This comprehensive analysis not only advances our understanding of biofilm prevention but also sets the stage for innovative developments in anti-biofouling materials and their future applications in food science. These advancements hold the potential to significantly enhance food microbiological safety, ensuring that consumers can confidently enjoy food products of the highest standards in terms of hygiene and quality.

Surface-segregating zwitterionic copolymers to control poly(dimethylsiloxane) surface chemistry

The use of microfluidic devices in biomedicine is growing rapidly in applications such as organs-on-chip and separations. Polydimethylsiloxane (PDMS) is the most popular material for microfluidics due to its ability to replicate features down to the nanoscale, flexibility, gas permeability, and low cost. However, the inherent hydrophobicity of PDMS leads to the adsorption of macromolecules and small molecules on device surfaces. This curtails its use in "organs-on-chip" and other applications. Current technologies to improve PDMS surface hydrophilicity and fouling resistance involve added processing steps or do not create surfaces that remain hydrophilic for long periods. This work describes a novel, simple, fast, and scalable method for improving surface hydrophilicity and preventing the nonspecific adsorption of proteins and small molecules on PDMS through the use of a surface-segregating zwitterionic copolymer as an additive that is blended in during manufacture. These highly branched copolymers spontaneously segregate to surfaces and rearrange in contact with aqueous solutions to resist nonspecific adsorption. We report that mixing a minute amount (0.025 wt%) of the zwitterionic copolymer in PDMS considerably reduces hydrophobicity and nonspecific adsorption of proteins (albumin and lysozyme) and small molecules (vitamin B12 and reactive red). PDMS blended with these zwitterionic copolymers retains its mechanical and physical properties for at least six months. Moreover, this approach is fully compatible with existing PDMS device manufacture protocols without additional processing steps and thus provides a low-cost and user-friendly approach to fabricating reliable biomicrofluidics.

A spiropyran-decorated nanocoating for dynamically regulating bacteria/cell adhesion and detachment

Microorganism adhesion and the resulting contamination of the biomaterial is one of the major causes of biomedical device failure. Stimuli-responsive materials based on dynamically regulating interactions with reversible characteristics of on-off states have attracted increasing attention. Here, a facile self-assembled biomaterial nanocoating constructed using acidity- and photoregulated spiropyran-modified nanoparticles was developed for reversibly regulating bacteria or mammalian cell adhesion-and-detachment. The coating was formed by coating a solution of spiropyran-conjugated nanoparticles around the surface of a silica gel followed by curing and drying at 60 °C for 30 min. Importantly, efficient adhesion-and-detachment of bacteria or cells could be controlled even after 8 cycles owing to the excellent acidity- and light-switched ability. Collectively, this well-defined self-assembled nanocoating as a dynamical and reversible agent provides promising insight for the development of biomedical devices, especially for biomaterial medical coatings.

Antifouling Zwitterionic Nanofibrous Wound Dressing for Long-Lasting Antibacterial Photodynamic Therapy

Nanofibrous mats as a wound dressing have received great attention in recent year. The development of biocompatible dressings with antibiofouling capability and long-lasting antibacterial properties is important but challenging. Antibacterial photodynamic therapy (aPDT) effectively eliminates pathogens via a photodynamic process that can circumvent the emergence of antibiotic-resistant pathogens. In this study, we integrated the zwitterionic materials (2-methacryloyloxyethyl phosphorylcholine (MPC) moiety) and aPDT photosensitizer, methylene blue (MB), to fabricate a long-lasting antibacterial nanofibrous mat using electrospinning technology. The prepared nanofibers possessed an appropriate water absorption and retention ability, superior cytocompatibility, and antibiofouling ability against both proteins and L929 cell adhesion. MB-loaded nanofibrous mats have exhibited superior aPDT against Gram-positive Staphylococcus aureus compared to Gram-negative Escherichia coli under moderate irradiation (100 W m-2) due to the presence of an extra outer membrane of Gram-negative bacteria serving as a protective barrier. In vitro release study demonstrated that the nanofibrous mat had a long-lasting drug release profile, which can efficiently suppress bacterial growth via aPDT. The antibacterial ability of the MB-loaded nanofibrous mat was commensurate or slightly inferior to antibiotics such as tetracycline and kanamycin, suggesting that it has the potential to be used as an antibiotic alternative. Overall, this zwitterionic nanofibrous mat with long-lasting aPDT function and nonadherent properties has potential as a promising antibacterial wound dressing.

Efficacy of Electrospun Nanofiber Membranes on Fouling Mitigation: A Review

Despite the advantages of high contaminant removal, operational flexibility, and technical advancements offered, the undesirable fouling property of membranes limits their durability, thus posing restrictions on their usage. An enormous struggle is underway to conquer this major challenge. Most of the earlier reviews include the basic concepts of fouling and antifouling, with respect to particular separation processes such as ultrafiltration, nanofiltration, reverse osmosis and membrane bioreactors, graphene-based membranes, zwitterionic membranes, and so on. As per our knowledge, the importance of nanofiber membranes in challenging the fouling process has not been included in any record to date. Nanofibers with the ability to be embedded in any medium with a high surface to volume ratio play a key role in mitigating the fouling of membranes, and it is important for these studies to be critically analyzed and reported. Our Review hence intends to focus on nanofiber membranes developed with enhanced antifouling and biofouling properties with a brief introduction on fabrication processes and surface and chemical modifications. A summary on surface modifications of preformed nanofibers is given along with different nanofiller combinations used and blend fabrication with efficacy in wastewater treatment and antifouling abilities. In addition, future prospects and advancements are discussed.

Hydrophobicity of the Pentafluorosulfanyl Group in Side Chains of Polymethacrylates by Evaluation with Surface Free Energy and Neutron Reflectivity

A hydrophobic surface or coating is required for surface protection, anti-fouling, adhesion, and other applications. For the achievements of hydrophobic properties, fluorine-based coatings, such as the introduction of trifluoromethyl or difluoromethylene groups, are conventionally employed. Recent developments in synthetic chemistry have indicated other organic fluoroalkyl groups that are suitable for achieving a more hydrophobic surface. In this study, we focused on the hydrophobic properties of the pentafluorosulfanyl (-SF₅) group. We synthesized polymethacrylates with -SF₅ groups or other functional groups (-CF₃, -CH₃, and -H) in their side chains and evaluated their hydrophobicity based on contact angles of water and ethylene glycol and the affinities of their films to water through neutron reflectivity measurements to demonstrate the superior hydrophobic properties of the -SF₅ group. The water contact angle on the polymethacrylate film with -SF₅ groups was larger, which suggested that the surface free energy was lower than that of the other polymethacrylate thin films with pendant side chains of -CF₃, -CH₃, and -H. In addition, the fitting analyses of the neutron reflectivity profiles of the thin polymer films in contact with air and water revealed the lowest affinity between water and the surface of polymethacrylate films with -SF₅ groups among the films of the synthesized polymers. Thus, we demonstrated the potential of pentafluorosulfanyl groups as advanced hydrophobic groups.

Synthesis of Carbonaceous Hydrophobic Layers through a Flame Deposition Process

In this study we report the effect of fuel type (biodiesel vs. methane), flame structure and flame height (inner-cone vs. outer-cone), and the percent of oxygen content in the oxidizer stream for the formation of hydrophobic carbon layers using co-flow diffusion flames. It was found that a flame formed using a gaseous fuel (methane) over a vaporized liquid fuel, Canola Methyl Ester (CME), has significant structural differences that enable vastly different deposition behavior of soot layers on the surface of solid substrates. Due to its larger pyrolysis zone (taller inner-cone), the CH4/air flame has a smaller region that supports uniform soot deposition of hydrophobic carbon layers (C-layers) compared to the CME/air flame. When a solid substrate is placed within the pyrolysis zone (inner-cone) of a flame the resulting layer is non-uniform, hydrophilic, and consists of undeveloped soot. However, when outside the pyrolysis zone, the deposited soot tends to be uniform and mature, ultimately creating a hydrophobic C-layer consisting of the typical microscale interconnected weblike structures formed of spherical soot nanoparticles. The effect of oxygen content (35% and 50% O2) in the oxidizer stream for the formation of hydrophobic C-layers was also studied in this work. It was found that oxygen enrichment within the CME flame alters the structure of the flame, hence affecting the morphology of the formed C-layer. Under oxygen enrichment the central region of the deposited C-layer is composed of a weblike structure similar to those seen in the air flames; however, this central region is bordered by a region of densely compacted soot that shows signs of significant thermal stress. At 35% O2 the thermal stress is expressed as multiple microscale cracks while at 50% O2 this border region shows much larger cracks and macroscale layer peeling. The formed C-layers under the different flame conditions were tested for hydrophobicity by measuring the contact angle of a water droplet. The morphology of the C-layers was analyzed using scanning electron microscopy.

Gravity-driven electrospun membranes for effective removal of perfluoro-organics from synthetic groundwater

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are emerging contaminants in water and soil. Electrospun membranes with open structure could treat PFAS in a gravity-driven mode with ultralow pressure needs. The electrospun ultrathin fibers (67 ± 27 nm) was prepared for the enhanced specific surface area; where polyvinylidene fluoride (PVDF) backbones and the grafted quaternary ammonium moieties (QA; PVDF-g-QA membranes) provided both hydrophobicity and anion-exchange ability (electrostatic interaction). High affinity towards the perfluorooctanoic acid (PFOA)/perfluorooctanesulfonic acid (PFOS) molecules (denoted as PFOX collectively) was observed, and >95% PFOX was removed from synthetic groundwater with a flux of 32.3 Lm-2h-1 at ΔPo = 313 Pa. With a higher octanol/water partitioning coefficient (Log Kow = 6.3) and close dispersion interaction parameter to the membrane backbones (16.6% difference in δd), the effective PFOS removal remained under alkaline and high conductivity conditions due to the intensive hydrophobic interaction compared to that of PFOA. Long-term studies exhibited >90% PFOX removal in an 8 h test with a capacity of 258 L/m2. Under mild regeneration conditions, PFOA and PFOS were concentrated by 35-fold and 39-fold, respectively. Overall, the gravity-driven electrospun PVDF-g-QA membranes, with adsorptive effectiveness and ease of regeneration, showed great potential in PFAS remediation.

Transparent polycarbonate coated with CeO2 nanozymes repel Pseudomonas aeruginosa PA14 biofilms

Highly transparent CeO₂/polycarbonate surfaces were fabricated that prevent adhesion, proliferation, and the spread of bacteria. CeO₂ nanoparticles with diameters of 10-15 nm and lengths of 100-200 nm for this application were prepared by oxidizing aqueous dispersions of Ce(OH)₃ with H₂O₂ in the presence of nitrilotriacetic acid (NTA) as the capping agent. The surface-functionalized water-dispersible CeO₂ nanorods showed high catalytic activity in the halogenation reactions, which makes them highly efficient functional mimics of haloperoxidases. These enzymes are used in nature to prevent the formation of biofilms through the halogenation of signaling compounds that interfere with bacterial cell-cell communication ("quorum sensing"). Bacteria-repellent CeO₂/polycarbonate plates were prepared by dip-coating plasma-treated polycarbonate plates in aqueous CeO₂ particle dispersions. The quasi-enzymatic activity of the CeO₂ coating was demonstrated using phenol red enzyme assays. The monolayer coating of CeO₂ nanorods (1.6 μg cm^-2) and the bacteria repellent properties were demonstrated by atomic force microscopy, biofilm assays, and fluorescence measurements. The engineered polymer surfaces have the ability to repel biofilms as green antimicrobials on plastics, where H₂O₂ is present in humid environments such as automotive parts, greenhouses, or plastic containers for rainwater.

Zwitterionic Polysulfone Copolymer/Polysulfone Blended Ultrafiltration Membranes with Excellent Thermostability and Antifouling Properties

Membrane fouling has been one of the most important challenges in membrane separation operations. In this study, we report a facile strategy to prepare antifouling polysulfone (PSf) UF membranes by blending amphiphilic zwitterion polysulfone-co-sulfobetaine polysulfone (PSf-co-SBPSf) copolymer. The copolymer chemical structure was characterized by ¹HNMR spectroscopy. The PSf/PSf-co-SBPSf blend membranes with various zwitterionic SBPSf segment contents exhibited better surface hydrophilicity and excellent antifouling ability compared to PSf and PSf/PEG membranes. The significant increase of both porosity and water permeance indicates that the PSf-co-SBPSf has a pore-forming effect. The pure water flux and flux recovery ratio of the PSf/PSf-co-SBPSf blend membranes were both remarked to improve 286.43 L/m²h and 92.26%, while bovine serum albumin (BSA) rejection remained at a high level (97.66%). More importantly, the water flux and BSA rejection see minimal variance after heat treatment, indicating excellent thermostability. Overall, the PSf/PSf-co-SBPSf blend membranes achieved a comprehensive performance of sustainable hydrophilic, high permeation flux, and remarkable antifouling ability, thus becoming a promising candidate in high-temperature separation application.

Confined Channels Induced Coalescence Demulsification and Slippery Interfaces Constructed Fouling Resist-Release for Long-Lasting Oil/Water Separation

Superwetting membranes based on steric exclusion and affinity difference have drawn substantial interest for oil/water separation. However, the state-of-the-art membranes fail to literally sort out fouling and permeability decline and so limit their viability for long-term separation. Inspired by Dayu's philosophy of "draining rather than blocking water", herein, we achieve a long-lasting and efficient separation for viscous emulsions by designing poly(hydroxyethyl methylacrylate) (PHEMA)- and polydimethylsiloxane (PDMS)-compensated poly(vinylidene fluoride) membranes based on coalescence demulsification via chemical coordination phase separation. The symmetric and torturous microporous structure facilitated oil spatial confining and coalescence demulsification, while the synergistic compensation of PHEMA and PDMS coordinated the fouling resist and release properties, which was confirmed by multichannel confocal laser scanning microscopy. The developed membrane shows an unprecedented permeability half-life (τ) for viscous emulsions (e.g., decamethylcyclopentasiloxane, soybean oil paraffin, n-hexadecane, and isooctane) under cross-flow operation, far more beyond common superwetting membranes under applied bench-scale dead-end filtration. Our technique for designing "nonfouling" membranes opens up opportunities for advancing next-generation membranes for oil/water separation.

A self-cleaning zwitterionic nanofibrous membrane for highly efficient oil-in-water separation

The oil and bacteria adhesion during membrane separation process brings great challenges to the operation costs and membrane service life. Meantime, the strong chemical corrosion in sewage seriously limits the durability of membrane as well. Herein, a facile strategy is developed for fabricating highly stable and efficient zwitterionic nanofibrous membrane (NFM) with self-cleaning feature via the combination of in-situ cross-linking of poly (sulfobetaine methacrylate) (PSBMA) and electrospun poly (ether sulfone) (PES) nanofibers. Owing to the introduction of zwitterionic functional groups, the PSBMA/PES NFM exhibits superior antifouling ability (over 3 cycles of crude oil fouling/self-cleaning and up to 7 days of bacteria adhesion/repelling tests). Moreover, the membrane also presents remarkable chemical stability in acidic, alkaline and salty environments; and exhibits excellent separation performance for both layered oil/water mixture and oil-in-water emulsion as well. Furthermore, the membrane is capable to remove bacteria during the continuous oil/water mixture separation. Overall, the proposed strategy provides a new perspective into developing long-term antifouling membrane materials for complicated oily wastewater remediation in various corrosive environments.

Sulfonated Polyaniline as Zwitterionic and Conductive Interfaces for Anti-Biofouling on Open Electrode Surfaces in Electrodynamic Systems

Electrodynamic systems for bioanalytical applications constantly suffer from biofouling due to electrical field-induced nonspecific bioadsorption on electrode surfaces. To minimize this issue, surface modification using anti-biofouling and conductive materials is necessary to not only protect the electrode surface from nonspecific bioadsorption but also maintain desired electrodynamic properties for electrode operation. In this study, we designed and prepared a conductive, zwitterionic, and self-doped sulfonated polyaniline (SPANI) coating on Au electrode surfaces for anti-biofouling applications. The zwitterionic coating was fabricated by electrochemical polymerization of aniline on the Au electrode surface functionalized with cysteamine (HS-CH₂CH₂-NH₂) and then a post-polymerization treatment with fuming sulfuric acid. We found that the SPANI-coated electrodes exhibited an excellent anti-biofouling ability in dielectrophoresis (DEP) capturing-and-releasing processes, with a very low average residual mass rate of 1.44% for the SPANI-5s electrode, whereas electrodes modified with poly(ethylene glycol) (PEG) gave an average residual mass rate of 14.30%. Even under continuous operation for more than 1 h, the SPANI-5s electrode still showed stable anti-biofouling ability for an 11-cycle E. coli capturing-and-releasing DEP process, with the residual mass rate for all 11 cycles being kept at or below 2.18% to give an average residual mass rate of 1.62% with a standard deviation of 0.40%. This study demonstrates that electrodynamic systems with zwitterionic SPANI coated on open electrode surfaces can excellently function with decent conductance and anti-biofouling performance.

Ionic Liquid-Functionalized Multiwalled Carbon Nanotube-Based Hydrophobic Coatings for Robust Antibacterial Applications

In recent years, the biomimetic superhydrophobic coatings have received tremendous attention, owing to their potential in fabricating self-cleaning surfaces, in environmental applications. Consequently, extensive research has been devoted to create a superhydrophobic surface using the oxidized derivatives of CNTs and graphene. Thus, the design and development of a self-cleaning/superhydrophobic surface with good biocompatibility are an effective approach to deal with the bacterial infections related to biomedical devices used in hospitals. In this context, herein, we have developed the material based on ionic liquid (IL)-functionalized multiwalled carbon nanotubes (MWCNTs) for hydrophobic coatings, which was fully characterized with various techniques such as Fourier transform infrared, powder X-ray diffraction, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. We have evaluated the synthesized ILs for their antibacterial potential against the pathogenic bacterial strains such as Gram-positive (Staphylococcus aureus and methicillin-resistant S. aureus) and Gram-negative (Escherichia coli) bacterial strains. Further, atomic force and scanning electron microscopic studies have been performed to investigate the morphological changes to unravel the mechanism of action, whereas DNA binding study indicates the binding of IL-1d@MWCNT with DNA (K_a = 2.390 × 10⁴ M^-1). Furthermore, the developed material (IL-1d@MWCNT) is coated onto the surface of polyvinyl chloride (PVC) and evaluated for hydrophobicity through water contact angle measurements and possesses long-term antibacterial efficiency against both under-investigating pathogenic strains. For the biocompatibility assay, the obtained coated PVC material has also been evaluated for its cytotoxicity, and results reveal no toxicity against viable cells. These all results are taken together, indicating that by coating with the developed material IL-1d@MWCNT, a robust self-sterilizing surface has achieved, which helps in maintaining a bacteria-free surface.

Nonadherent Zwitterionic Composite Nanofibrous Membrane with a Halloysite Nanocarrier for Sustained Wound Anti-Infection and Cutaneous Regeneration

Wound dressing synechia and sustained postoperative bacterial infection would cause serious secondary damage to nascent cutaneous tissue and impede normal regeneration of injured wound. Endowing wound dressings with nonadherent capability and long-lasting antibacterial property could optimize the postoperative wound healing conditions and promote wound tissue neogenesis, which have important clinical application value and demand. In this study, novel nanocarrier-embedded zwitterionic composite nanofibrous membranes are fabricated using the co-electrospinning/photo-cross-linking method for the purpose of painless removal and eliminating long-lasting antibacterial infection during postoperative wound therapy. The prepared membranes possess good biocompatibility, excellent antibiofouling ability against both bacteria and plasma proteins, and platelet and L929 cell adhesion. Furthermore, in vitro and in vivo antibacterial evaluations exhibit that the composite nanofibrous membranes with a sustained drug release profile could effectively inhibit bacterial proliferation for at least 16 days. Additionally, in vivo wound regeneration assessment indicates that the obtained membranes could better enhance skin regeneration than the commercial 3M Tegaderm film, which highlights the application prospect of such novel zwitterionic composite nanofibrous membranes for sustained postoperative wound anti-infection and cutaneous regeneration.

Strategies to Tune Electrospun Scaffold Porosity for Effective Cell Response in Tissue Engineering

Tissue engineering aims to develop artificial human tissues by culturing cells on a scaffold in the presence of biochemical cues. Properties of scaffold such as architecture and composition highly influence the overall cell response. Electrospinning has emerged as one of the most affordable, versatile, and successful approaches to develop nonwoven nano/microscale fibrous scaffolds whose structural features resemble that of the native extracellular matrix. However, dense packing of the fibers leads to small-sized pores which obstruct cell infiltration and therefore is a major limitation for their use in tissue engineering applications. To this end, a variety of approaches have been investigated to enhance the pore properties of the electrospun scaffolds. In this review, we collect state-of-the-art modification methods and summarize them into six classes as follows: approaches focused on optimization of packing density by (a) conventional setup, (b) sequential or co-electrospinning setups, (c) involving sacrificial elements, (d) using special collectors, (e) post-production processing, and (f) other specialized methods. Overall, this review covers historical as well as latest methodologies in the field and therefore acts as a quick reference for those interested in electrospinning matrices for tissue engineering and beyond.

Simple Surface Modification of Poly(dimethylsiloxane) via Surface Segregating Smart Polymers for Biomicrofluidics

Poly(dimethylsiloxane) (PDMS) is likely the most popular material for microfluidic devices in lab-on-a-chip and other biomedical applications. However, the hydrophobicity of PDMS leads to non-specific adsorption of proteins and other molecules such as therapeutic drugs, limiting its broader use. Here, we introduce a simple method for preparing PDMS materials to improve hydrophilicity and decrease non-specific protein adsorption while retaining cellular biocompatibility, transparency, and good mechanical properties without the need for any post-cure surface treatment. This approach utilizes smart copolymers comprised of poly(ethylene glycol) (PEG) and PDMS segments (PDMS-PEG) that, when blended with PDMS during device manufacture, spontaneously segregate to surfaces in contact with aqueous solutions and reduce the hydrophobicity without any added manufacturing steps. PDMS-PEG-modified PDMS samples showed contact angles as low as 23.6° ± 1° and retained this hydrophilicity for at least twenty months. Their improved wettability was confirmed using capillary flow experiments. Modified devices exhibited considerably reduced non-specific adsorption of albumin, lysozyme, and immunoglobulin G. The modified PDMS was biocompatible, displaying no adverse effects when used in a simple liver-on-a-chip model using primary rat hepatocytes. This PDMS modification method can be further applied in analytical separations, biosensing, cell studies, and drug-related studies.

Understanding the Antifouling Mechanism of Zwitterionic Monomer-Grafted Polyvinylidene Difluoride Membranes: A Comparative Experimental and Molecular Dynamics Simulation Study

The antifouling process of the membrane is very vital for the highly efficient treatment of industrial wastewater, especially high salinity wastewater containing oil and other pollutants. In the present work, the dynamical antifouling mechanism is explored via molecular dynamics simulations, while the corresponding experiments about surface properties of the zwitterionic monomer-grafted polyvinylidene difluoride membrane are designed to verify the simulated mechanism. Water can form a stable hydration layer at the grafted membrane surface, where all the simulated radial distribution function of water/membrane, hydrogen bond number, water diffusivity, and experimental oil contact angles are stable. However, the water flux across the membrane will increase first and then decrease as the grafting ratio increases, which not only depends on the reduced pore size of the zwitterionic monomer-grafted membrane but also results from water diffusion. Furthermore, the dynamical fouling processes of pollutants (taking sodium alginate as an example) on the grafted membrane in water and brine solution are investigated, where both the high grafting ratio and electrolyte CaCl₂ can enhance the fouling energy barrier of the pollutant. The results show that both the enhanced hydrophilic property and the electrostatic repulsion can affect the antifouling capability of the grafted membrane. Finally, the ternary synergistic antifouling mechanisms among the zwitterionic membrane, electrolyte, and pollutant sodium alginates are discussed, which could be helpful for the rational design and preparation of new and highly efficient zwitterionic antifouling membranes.

Capillary effect in Janus electrospun nanofiber membrane for oil/water emulsion separation

Janus electrospun nanofiber membranes (J-ENMs) have attracted considerable interest as membranes for oil-in-water emulsion separation due to the opposite properties on each side of the membrane. Such properties can provide capillary effect and achieve water unidirectional transportation. However, the capillary effect on performances of the J-ENMs is still obscure. Therefore, it is highly important to investigate the relation of pore size, capillary pressure, and fluid flux of them. For this study, J-ENMs, which have a dual-layer structure with hydrophilic polyacrylonitrile (PAN) and hydrophobic polystyrene (PS) nanofibrous membranes simultaneously, were fabricated via the electrospinning process. Among the fabricated membranes, the large pore sizes of the PS layer of J-ENMs affected capillary pressure leading to a pure water flux increase of nine times that of the small pore size. For emulsion flux, oil droplets can pass through a large pore of the PS layer easily and can cause a decrease in emulsion flux. Nevertheless, the emulsion flux of J-ENMs was 1.7 times higher than that of single layer membrane, which showed a promising application for the oil/water separation field.

Waterproof and Breathable Electrospun Nanofibrous Membranes

Waterproof and breathable (W&B) membranes combine fascinating properties of resistance to liquid water penetration and transmitting of water vapor, playing a key role in addressing problems related to health, resources, and energy. Electrospinning is an efficient and advanced way to construct nanofibrous materials with easily tailored wettability and adjustable pore structure, therefore providing an ideal strategy for constructing W&B membranes. In this review, recent progress on electrospun W&B membranes is summarized, involving materials design and fabrication, basic properties of electrospun W&B membranes associated with waterproofness and breathability, as well as their applications. In addition, challenges and future trends of electrospun W&B membranes are discussed.

Nanozymes in Nanofibrous Mats with Haloperoxidase-like Activity To Combat Biofouling

Electrospun polymer mats are widely used in tissue engineering, wearable electronics, and water purification. However, in many environments, the polymer nanofibers prepared by electrospinning suffer from biofouling during long-term usage, resulting in persistent infections and device damage. Herein, we describe the fabrication of polymer mats with CeO_{2- x} nanorods that can prevent biofouling in an aqueous environment. The embedded CeO_{2- x} nanorods are functional mimics of natural haloperoxidases that catalyze the oxidative bromination of Br^- and H₂O₂ to HOBr. The generated HOBr, a natural signaling molecule, disrupted the bacterial quorum sensing, a critical step in biofilm formation. The polymer fibers provide porous structures with high water wettability, and the embedded cerium oxide nanozymes act as a catalyst that can efficiently trigger oxidative bromination, as shown by a haloperoxidase assay. Additionally, the embedded nanozymes enhance the mechanical property of polymer mats, as shown by a single-fiber bending test using atomic force microscopy. We envision that the fabricated polymer mats with CeO_{2- x} nanorods may be used to provide mechanically robust coatings with antibiofouling properties.

Fabrication of Janus Membranes for Desalination of Oil-Contaminated Saline Water

Desalination of oil-contaminated saline water using membrane distillation requires hydrophobic membranes with underwater superoleophobic surfaces. For designing such membranes, the chemistry and morphology of the interfacial domains in contact with the contaminated water need to be adjusted such that a stable water layer, adhering to the surface, prevents oil droplets from wetting the membrane. In this article, we present an approach that relies on the controlled functionalization of the surface of polyvinylidene fluoride (PVDF) membranes; we adjust the surface topography of the membranes and introduce chemical heterogeneity to them. We show that the morphology of the PVDF surface can be altered by adjusting the composition of the nonsolvent bath used for the phase inversion process. Also, we render the surface of the membranes hydrophilic by using an alkaline chemical bath solution. The membrane morphology and effectiveness of our chemical treatment were confirmed by atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), Fourier-transformed infrared spectroscopy (FTIR), and zeta potential measurements. A stable underwater contact angle, higher than 150°, was observed for both canola oil (ρ ≈ 0.913 g cm^-3, γ ≈ 31.5 mN m^-1) and hexane (ρ ≈ 0.655 g cm^-3, γ ≈ 18 mN m^-1). We evaluated the performance of both pristine and functionalized membranes in a laboratory-scale direct contact membrane distillation (DCMD) setup and desalinated a saline solution contaminated with 500 ppm canola oil. Our results show that oil does not wet the functionalized membrane during the desalination process. The average permeate flux and salt rejection values for the functionalized membranes were 45 ± 5 Lm^-2h^-1 ( T_feed = 70 °C, T_distillate = 20 °C) and 99.99%, respectively.

Current and Emerging Approaches to Engineer Antibacterial and Antifouling Electrospun Nanofibers

From ship hulls to bandages, biological fouling is a ubiquitous problem that impacts a wide range of industries and requires complex engineered solutions. Eliciting materials to have antibacterial or antifouling properties describes two main approaches to delay biofouling by killing or repelling bacteria, respectively. In this review article, we discuss how electrospun nanofiber mats are blank canvases that can be tailored to have controlled interactions with biologics, which would improve the design of intelligent conformal coatings or freestanding meshes that deliver targeted antimicrobials or cause bacteria to slip off surfaces. Firstly, we will briefly discuss the established and emerging technologies for addressing biofouling through antibacterial and antifouling surface engineering, and then highlight the recent advances in incorporating these strategies into electrospun nanofibers. These strategies highlight the potential for engineering electrospun nanofibers to solicit specific microbial responses for human health and environmental applications.