Polycyclodextrin-Clay Composites: Regenerable Dual-Site Sorbents for Bisphenol A Removal from Treated Wastewater

Removal of contaminants present in water and wastewater by cyclodextrin-based adsorbents: A bibliometric review from 1993 to 2022

Cyclodextrin (CD), a cyclic oligosaccharide from enzymatic starch breakdown, plays a crucial role in pharmaceuticals, food, agriculture, textiles, biotechnology, chemicals, and environmental applications, including water and wastewater treatment. In this study, a statistical analysis was performed using VOSviewer and Citespace to scrutinize 2038 articles published from 1993 to 2022. The investigation unveiled a notable upsurge in pertinent articles and citation counts, with China and USA contributing the highest publication volumes. The prevailing research focus predominantly revolves around the application of CD-based materials used as adsorbents to remove conventional contaminants such as dyes and metals. The CD chemistry allows the construction of materials with various architectures, including cross-linked, grafted, hybrid or supported systems. The main adsorbents are cross-linked CD polymers, including nanosponges, fibres and hybrid composites. Additionally, research efforts are actually concentrated on the synthesis of CD-based membranes, CD@graphene oxide, and CD@TiO2. These materials are proposed as adsorbents to remove emerging pollutants. By employing bibliometric analysis, this study delivers a comprehensive retrospective review and synthesis of research concerning CD-based adsorbents for the removal of contaminants from wastewater, thereby offering valuable insights for future large-scale application of CD-based adsorption materials.

Understanding the Nanoscale Affinity between Dissolved Organic Matter and Noncrystalline Mineral with the Implication for Water Treatment

In recent decades, the concentration of dissolved organic matter (DOM) in aquatic ecosystems has gradually increased, leading to water pollution problems. Understanding the interfacial chemical processes of DOM on natural minerals is important to the exploration of high-efficiency absorbents. However, studying DOM chemical processes and adsorption mechanisms are still challenging due to the complex DOM structure and environmental system. Hence, we characterized the microstructure changes after the formation of amorphous calcium phosphate (ACP) at the interface of montmorillonite (Mt) minerals in a simulated environment system. Combined with atomic force microscopy and density functional theory (DFT) simulation, the mechanism of interfacial interaction between Mt-ACP and DOM was characterized at the molecular level. Moreover, we further evaluated the adsorption behavior of Mt-ACP as a potential adsorbent for organic matter. The comprehensive investigation of humic acid adsorption, intermolecular force, and DFT simulation is conducive to our understanding of the interfacial interaction mechanism between organic matter and noncrystalline minerals in aquatic environments and provides new perspectives on the application of clay-based mineral materials in pollutant removal under exposure from DOM.

β-Cyclodextrin functionalized adsorbents for removal of organic micropollutants from water

The presence of organic micropollutants in water is an ongoing concern due to the potential risks to living organisms. β-Cyclodextrin-based adsorbents have been developed to remove organic micropollutants from water as they are deemed to be efficient, selective and reusable. This literature review establishes the current state of the knowledge on the application of β-Cyclodextrin adsorbents for the removal of organic micropollutants from water and determines knowledge gaps and recommendations for future studies. An inventory of organic micropollutants that have been studied was developed and it revealed that bisphenol-A has been the most commonly studied. Adsorbent configurations were reviewed and modifications to the adsorbent structures that have provided enhanced adsorption properties were identified. The size and shape of the organic micropollutants was found to affect the adsorption behavior. The surface charge of β-Cyclodextrin adsorbents influence adsorption when repulsive forces are present and the extent of repulsion can depend on the pH of the solution. Common competitors such as natural organic matter and inorganic ions do not significantly impact the adsorption of organic micropollutants however relatively small fulvic acids may compete for the β-Cyclodextrin cavity depending on the adsorbent type. Desorption of organic micropollutants from these adsorbents has been accomplished with alcohols and most adsorbents have been recovered and reused in adsorption/desorption cycles. The need for enhanced recovery processes that maintain water quality and adsorbent integrity was identified. The use of quantitative structure-activity relationships and molecular computational tools could potentially guide future environmental applications of β-Cyclodextrin adsorbents.

Bioapplication of cyclodextrin-containing montmorillonite

Recent progresses in the integration of CDs and montmorillonite, as well as applications of CD-containing montmorillonite hybrid host systems are summarized in this review. Several efficient synthesis strategies, such as ion exchange, metal coordination, supramolecular strategies, polymerizations and organic synthesis methods, have been discussed during the preparation of CDs/montmorillonite hybrid composites. In particular, diverse instrumental techniques were highly recommended for characterizing the as-obtained hybrid systems, including their chemical composition and structures, crystallinity, surface/self-assembled morphologies, as well as other particular physiochemical properties, providing a direct guide for promoting the desired structures and exploring various applications. It should be noted that the introduction of functional groups, as well as the integration of CDs and montmorillonite granted the thus obtained CD-containing montmorillonite hybrid host systems a lot of unique features, providing great opportunities for expanding the practical applications to a series of biological and environmental areas, such as biosensors, sorption and decontamination of bio/environmental hazardous materials, biostudies about aqueous dispersity, stability and biocompatibility, drug loading and target delivery, controlled and sustained drug release, as well as antibacterial.

An Overview on Composite Sorbents Based on Polyelectrolytes Used in Advanced Wastewater Treatment

Advanced wastewater treatment processes are required to implement wastewater reuse in agriculture or industry, the efficient removal of targeted priority and emerging organic & inorganic pollutants being compulsory (due to their eco-toxicological and human health effects, bio-accumulative, and degradation characteristics). Various processes such as membrane separations, adsorption, advanced oxidation, filtration, disinfection may be used in combination with one or more conventional treatment stages, but technical and environmental criteria are important to assess their application. Natural and synthetic polyelectrolytes combined with some inorganic materials or other organic or inorganic polymers create new materials (composites) that are currently used in sorption of toxic pollutants. The recent developments on the synthesis and characterization of composites based on polyelectrolytes, divided according to their macroscopic shape-beads, core-shell, gels, nanofibers, membranes-are discussed, and a correlation of their actual structure and properties with the adsorption mechanisms and removal efficiencies of various pollutants in aqueous media (priority and emerging pollutants or other model pollutants) are presented.

Alkali-Activated Materials as Catalysts for Water Purification

In this study, novel and cost-effective alkali-activated materials (AAMs) for catalytic applications were developed by using an industrial side stream, i.e., blast furnace slag (BFS). AAMs can be prepared from aluminosilicate precursors under mild conditions (room temperature using non-hazardous chemicals). AAMs were synthesized by mixing BFS and a 50 wt % sodium hydroxide (NaOH) solution at different BFS/NaOH ratios. The pastes were poured into molds, followed by consolidation at 20 or 60 °C. As the active metal, Fe was impregnated into the prepared AAMs by ion exchange. The prepared materials were examined as catalysts for the catalytic wet peroxide oxidation (CWPO) of a bisphenol A (BPA) aqueous solution. As-prepared AAMs exhibited a moderate surface area and mesoporous structure, and they exhibited moderate activity for the CWPO of BPA, while the iron ion-exchanged, BFS-based catalyst (Fe/BFS30-60) exhibited the maximum removal of BPA (50%) during 3 h of oxidation at pH 3.5 at 70 °C. Therefore, these new, inexpensive, AAM-based catalysts could be interesting alternatives for catalytic wastewater treatment applications.

Acid mine drainage treatment with novel high-capacity bio-based anion exchanger

Aminated peat (termed PG-Peat) produced using polyethylenimine and glycidyltrimethylammonium chloride was used for the removal of sulphate from real acid mine drainage (AMD) in batch and column mode sorption studies. In the batch tests, the highest sulphate removal capacity achieved was 125.7 mg/g. PG-Peat was efficient and rapid in sulphate removal from AMD even at low temperatures (2-5 °C), achieving equilibrium within a contact time of 30 min. The PG-Peat column treating real AMD showed even higher sulphate uptake capacity (154.2 mg SO₄^2-/g) than the batch sorption studies. The regenerative and practical applicability of PG-Peat was also tested in column set-ups using synthetic sulphate solutions (at pH 5.8 and pH 2.0). The sulphate uptake capacity obtained was higher in column mode when the solutions were treated at acidic pH (2.0) compared to pH 5.8. This could be attributed to the presence of cationized amine groups on PG-Peat under acidic pH conditions. Almost complete sulphate desorption was achieved with NaCl in the column that treated synthetic sulphate solution at pH 5.8, while the lowest desorption rates were observed in the column that treated acidic synthetic sulphate solution (pH 2).

Exploring the Ability of Luminescent Metal Assemblies to Bind and Sense Anionic or Ionizable Analytes A Ru(phen)2bipy-Based Dizinc Complex for Bisphenol A (BPA) Recognition

The synthesis of a new Ru^II complex, in which the metal is coordinated by two 1,10-phenanthroline ligands and a 2,2′-bipyridyl unit linked, via methylene bridges in its 4 and 4′ positions, to two 1,4,7,10-tetraazacyclododecane (cyclen) macrocycles ([Ru(phen)₂L]²⁺) is reported. Protonation and Zn^II binding by [Ru(phen)₂L]²⁺ have been analyzed by potentiometric titration, evidencing the formation of mixed hetero-binuclear and hetero-trinuclear Zn^II/Ru^II complexes. These complexes were tested as bis-phenol A (BPA) binders. Only the dizinc complex with [Ru(phen)₂L]²⁺ is able to bind BPA in aqueous solution, affording a remarkably stable {Zn₂[Ru(phen)₂L]BPA(H₋₂)}⁴⁺ adduct at neutral pH, in which BPA is bound in its doubly deprotonated form to the two Zn^II ions. BPA binding was found to quench the luminescence emission of the Ru^II(phen)₂bipy core. Although the quenching effect is modest, this study demonstrates that appropriately designed dizinc complexes can be used for binding and optical sensing of BPA in water.

Cyclodextrin Polymers and Cyclodextrin-Containing Polysaccharides for Water Remediation

Chemical pollution of water has raised great concerns among citizens, lawmakers, and nearly all manufacturing industries. As the legislation addressing liquid effluents becomes more stringent, water companies are increasingly scrutinized for their environmental performance. In this context, emergent contaminants represent a major challenge, and the remediation of water bodies and wastewater demands alternative sorbent materials. One of the most promising adsorbing materials for micropolluted water environments involves cyclodextrin (CD) polymers and cyclodextrin-containing polysaccharides. Although cyclodextrins are water-soluble and, thus, unusable as adsorbents in aqueous media, they can be feasibly polymerized by using different crosslinkers such as epichlorohydrin, polycarboxylic acids, and glutaraldehyde. Likewise, with those coupling agents or after substituting hydroxyl groups with more reactive moieties, cyclodextrin units can be covalently attached to a pre-existing polysaccharide. In this direction, the functionalization of chitosan, cellulose, carboxymethyl cellulose, and other carbohydrate polymers with CDs is vastly found in the literature. For the system containing CDs to be used for remediation purposes, there are benefits from a synergy that arises from (i) the ability of CD units to interact selectively with a broad spectrum of molecules, forming inclusion complexes and higher-order supramolecular assemblies, (ii) the functional groups of the crosslinker comonomers, (iii) the three-dimensional structure of the crosslinked network, and/or (iv) the intrinsic characteristics of the polysaccharide backbone. In view of the most recent contributions regarding CD-based copolymers and CD-containing polysaccharides, this review discusses their performance as adsorbents in micropolluted water environments, as well as their interaction patterns, addressing the influence of their structural and physicochemical properties and their functionalization.

Designing clay-polymer nanocomposite sorbents for water treatment: A review and meta-analysis of the past decade

Clay-polymer nanocomposites (CPNs) have been studied for two decades as sorbents for water pollutants, but their applicability remains limited. Our aim in this review is to present the latest progress in CPN research using a meta-analysis approach and identify key steps necessary to bridge the gap between basic research and CPN application. Based on results extracted from 99 research articles on CPNs and 8 review articles on other widely studies sorbents, CPNs had higher adsorption capacities for several inorganic and organic pollutant classes (including heavy metals, oxyanions, and dyes, n = 308 observations). We applied principal component analysis, analysis of variance, and multiple linear regressions to test how CPN and pollutant properties correlated with Langmuir adsorption model coefficients. While adsorption was, surprisingly, not influenced by mineral properties, it was influenced by CPN fabrication method, polymer functional groups, and pollutant properties. For example, among the pollutant classes, heavy metals had the highest adsorption capacity but the lowest adsorption affinity. On the other hand, dyes had high adsorption affinities, as reflected by the linear correlation between adsorption affinity and pollutant molecular weight. Scaling from 'basic research' to 'technological application' requires testing CPN performance in real water, application in columns, comparison to commercial sorbents, regeneration, and cost evaluation. However, our survey indicates that of the 158 observations, only 20 compared the CPN's performance to that of a commercial sorbent. We anticipate that this review will promote the design of smart and functional CPNs, which can then evolve into an effective water treatment technology.

Iron-Montmorillonite-Cyclodextrin Composites as Recyclable Sorbent Catalysts for the Adsorption and Surface Oxidation of Organic Pollutants

Iron-clay-cyclodextrin composites were designed as sorbent catalysts to adsorb and oxidize pollutants from water. The clay-iron backbone served as a mechanical support and as a heterogeneous Fenton catalyst, and the cyclodextrin monomers or polymers cross-linked with polyfluorinated aromatic molecules were used to accommodate adsorption of the pollutants. The composite based on iron-clay-cyclodextrin-polymers (Fe-MMT-βCD-DFB) exhibited superior adsorption and degradation of the model pollutants, bisphenol A (BPA), carbamazepine (CBZ), and perfluorooctanoic acid (PFOA), compared to the monomer-based composite and the native iron clay. The variety of adsorption sites, such as the polyfluorinated aromatic cross-linker, cyclodextrin toroid, and iron-clay surface, resulted in high adsorption affinity toward all pollutants; BPA was primarily adsorbed to the cyclodextrin functional groups, CBZ showed high affinity toward the Fe-MMT surface and the Fe-MMT-βCD-DFB composite, whereas PFOA was adsorbed mainly to the βCD-DFB polymer. Degradation, using H₂O₂, was highly efficient, reaching over 90% degradation in 1 h for BPA and CBZ and ∼80% for PFOA. The composite also showed excellent degradation efficiency in a multicomponent system with all three model pollutants. Furthermore, the composite's activity remained steady for five consecutive cycles of adsorption and degradation. The ability to remediate a broad range of pollutants, and the high overall removal exhibited by this novel material, demonstrates the potential for future application in water remediation technologies.

One-pot fabrication of antibacterial β-cyclodextrin-based nanoparticles and their superfast, broad-spectrum adsorption towards pollutants

The current water treatment technology is still based on low energy efficient processes due to the complex composition of wastewater. To achieve high energy efficiency, many micro-porous materials with complex functional groups have been fabricated because of their high pollutant adsorption capabilities. In this work, antibacterial β-cyclodextrin-based nanoparticles (E-β-CDN) were prepared via one-pot method to explore their adsorption performance to pollutants in wastewater. The resulting nanoparticles exhibited superfast adsorption kinetics to pollutants with removal efficiency of over 95% within 10 s. The nanoparticles also presented broad-spectrum adsorption to organic pollutants and heavy metal ions, and their maximum adsorption capacity was 3289.6 mg g^-1 towards methyl orange (MO) and 970.8 mg g^-1 towards Pb(II), much higher than that of many other adsorbents. Easy cyclic adsorption-desorption was another distinguishing feature of the nanoparticles, whose removal efficiency to these pollutants hardly varied after 10 cycles of regeneration. Interestingly, the resulting nanoparticles showed prominent antibacterial activity of 99.99% bacterial inhibitive rate against both gram-negative bacteria Escherichia coli (E. coli) and gram-positive bacteria Staphylococcus aureus (S. aureus). These results suggest that the resulting nanoparticles have great potential in the purification of the wastewater.

Dissolved organic matter adsorption from surface waters by granular composites versus granular activated carbon columns: An applicable approach

Many new sorbents have been introduced as an alternative for granular activated carbon (GAC), the most common sorbent for dissolved organic matter (DOM) removal. In the current study, we developed an applicable granular composite based on a flocculant commonly employed for drinking water treatment adsorbed to montmorillonite. DOM adsorption from surface waters, Lake Kinneret and Suwannee River, with low and high specific ultraviolet absorption (SUVA), respectively, by composite and GAC columns, was studied. Adsorption of DOM from Suwannee River was significantly higher by the composite column, in comparison to the GAC column, while an opposite trend was obtained for the adsorption of DOM from Lake Kinneret. In-situ regeneration of the columns with a brine solution was extremely efficient and inefficient for the composite and GAC columns, respectively. Adsorption, of both waters, post-regeneration by the composite column was not compromised, while GAC effectiveness decreased. The opposite trend in DOM adsorption from Suwannee River and Lake Kinneret was explained by the different affinities of the sorbents towards various DOM molecules. Distinguishing between different DOM components adsorbed by GAC and the composite was supported by ¹³C NMR and direct pyrolysis-GC-MS measurements. Furthermore, we demonstrated that the kinetics and adsorption at the equilibrium of five organic molecules to the composite and GAC can be correlated to their chemical-physical properties. Indeed, combining the properties of both sorbents, by integrating them into a single column, yielded higher DOM removal than by the individual columns. Furthermore, since DOM removal by GAC and by the composite, increases, and decreases with temperature, respectively, the integrated column, mitigates the changes in removal, stabilizing the adsorption performance. Such an integrated filter may minimize additional seasonal and water quality fluctuations.

Polycyclodextrins: Synthesis, functionalization, and applications

Cyclodextrins (CDs) are cyclic oligosaccharides with unique conical structure enabling host-guest inclusion complexes. However, virgin CDs sufferfrom low solubility, lack of functional groups and its inability to strong complexation with the guests. One of the most efficient ways to improve the properties of cyclodextrins is the synthesis of polycyclodextrins. Generally, there are two types of polycyclodextrins: 1) polymers containing CD units as parts of the main backbone; and 2) polymers with CD units as side chains. These polycyclodextrins are produced (i) from direct copolymerization of virgin cyclodextrins or cyclodextrins derivatives with various monomers including isocyanates, epoxides, carboxylic acids, anhydrides, acrylates, acrylamides and fluorinated aromatic compounds, or (ii) by post-functionalization of other polymers with CDs or CD derivatives.. By selecting the proper derivatives of CDs and controlling the polymerization, polycyclodextrins with linear, hyperbranched, and crosslinked structures have been synthesized. Polycyclodextrins have found significant applications in numerous areas, as adsorbents for removal of organic pollutants, carriers in gene/drug delivery, and for preparation of supramolecular based hydrogels. The focus of this review paper is placed on the synthesis, characterization, and applications of CDs so as to highlight challenges as well as the promising features of the future ahead of material developments based on CDs.

Clay-polymer nanocomposites: Progress and challenges for use in sustainable water treatment

Contaminant removal from water involves various technologies among which adsorption is considered to be simple, effective, economical, and sustainable. In recent years, nanocomposites prepared by combining clay minerals and polymers have emerged as a novel technology for cleaning contaminated water. Here, we provide an overview of various types of clay-polymer nanocomposites focusing on their synthesis processes, characteristics, and possible applications in water treatment. By evaluating various mechanisms and factors involved in the decontamination processes, we demonstrate that the nanocomposites can overcome the limitations of individual polymer and clay components such as poor specificity, pH dependence, particle size sensitivity, and low water wettability. We also discuss different regeneration and wastewater treatment options (e.g., membrane, coagulant, and barrier/columns) using clay-polymer nanocomposites. Finally, we provide an economic analysis of the use of these adsorbents and suggest future research directions.

Occurrence, fate and risk assessment of BPA and its substituents in wastewater treatment plant: A review

Several bisphenol analogues (BPs) are gradually replacing bisphenol A (BPA) in many fields, following strict restrictions on the production and use of BPA. The presence of micropollutants in wastewater treatment plants (WWTPs) may pose risks to the aquatic ecosystem and human health. In this review, we outlined the occurrence and fate of BPs in WWTPs, and estimated their potential risks to the aquatic ecosystem. BPA is still the most predominant bisphenol analogue in WWTPs with high detection rate and concentration, followed by bisphenol S (BPS) and F (BPF). Biodegradation and adsorption are the main removal pathways for removal of BPs in WWTPs. The secondary (activated sludge process, biological aerated filter, and membrane bioreactor) and advanced (membrane technique, ultraviolet disinfection, adsorption process, and ozonation) treatment processes show high removal efficiency for BPs, which are influenced by many factors such as sludge retention time and redox conditions. BPs other than BPA (assessed in this review) in effluent of WWTPs have low risks to Daphnia magna and early life stages on medaka, while BPA shows a medium or high risk under certain conditions. Knowledge gaps have been identified and future line of research on this class of chemicals in WWTPs is recommended. More data are needed to illustrate the occurrence and fate of BPs in WWTPs. Environmental risks of BPs other than BPA initiating from wastewater discharge to aquatic organisms remain largely unknown.

Preparation of sulfhydryl functionalized magnetic SBA-15 and its high-efficiency adsorption on uranyl ion in solution

A novel assembly method was used to prepare the sulfhydryl functionalized magnetic SBA-15 (SH-M-SBA-15). The physicochemical properties of SH-M-SBA-15 were characterized by TEM, XRD, EDS, FT-IR, BET, and VSM. Batch adsorption experiments were conducted to investigate the influence of initial uranium concentration, dosage of adsorbent, pH values, contact time, and temperature on the adsorption efficiency and behaviors. The adsorption types were analyzed from the aspects of kinetic, isotherms, and thermodynamic. The results show that the specific surface area of SH-M-SBA-15 is 316.67 m²/g, which is smaller than that of SBA-15 (692.18 m²/g). However, compared with SBA-15, SH-M-SBA-15 has more surface sulfhydryl functional groups. The addition of this group can improve the adsorption of uranyl ions by SH-M-SBA-15. The optimal adsorption conditions were adsorption dosage 40 mg/L, pH 6, temperature 35 °C, contact time 180 min, and initial uranium concentration 35 mg/L. Under this condition, the maximum adsorption amount of uranyl ion by SH-M-SBA-15 can reach 804.79 mg/g, which is much higher than the highest adsorption capacity of uranyl ion by SBA-15 (146.23 mg/g). The adsorption process was better depicted by the Langmuir isotherm model. The process was consistent with the quasi-second-order model. ΔG was negative and ΔH was positive, indicating spontaneous and endothermic adsorption.

β-Cyclodextrin-based hollow nanoparticles with excellent adsorption performance towards organic and inorganic pollutants

In this work, β-cyclodextrin (β-CD) based hollow nanoparticles (denoted as β-CDHN) with abundant active sites and high specific surface area were first fabricated via a facile one-step method. The β-CDHN presented a maximum adsorption capacity of 2080.35, 427.35 and 120.48 mg g^-1 towards the cationic dye methylene blue (MB), heavy metal ions (Pb²⁺) and bisphenol A (BPA), respectively, much higher than those of many other adsorbents. Furthermore, β-CDHN also exhibited fast adsorption kinetics towards these pollutants with adsorption rate constants 6 to 200 times higher than those of activated carbon and other β-CD-based adsorbents, meaning the former can remove these pollutants at a much faster adsorption rate than the latter adsorbents. More importantly, the removal efficiency of these pollutants on β-CDHN almost remained stable after 10 regeneration cycles with favorable recyclability. The prepared β-CDHN show great potential in practical applications due to their low costs and high efficiency in the treatment of organic and inorganic pollutants from wastewater.

Emerging pollutants-Part II: Treatment

Recently, emerging pollutants (EPs) have been frequently detected in urban wastewater, surface water, drinking water, and other water bodies. EPs mainly usually include pharmaceuticals and personal care products, endocrine-disrupting chemicals, antibiotic resistance genes, persistent organic pollutants, disinfection by-products, and other industrial chemicals. The potential threat of EPs to ecosystems and human health has attracted worldwide attention. Therefore, how to treat EPs in various water bodies has become one of the research priorities. In this paper, some research results on treatment of EPs published in 2018 were summarized. PRACTITIONER POINTS: At present, more attention has been paid to emerging pollutants (EPs), including pharmaceuticals and personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), antibiotic resistance genes, persistent organic pollutants, disinfection by-products, etc. Existing EPs disposal technologies mainly include: engineered wetlands and natural systems, biological treatment, physical and physicochemical separation, chemical oxidation, catalysis, etc. This paper reviews some research results on the treatment technologies of EPs published in 2018.

An Asymmetric Electrochemical System with Complementary Tunability in Hydrophobicity for Selective Separations of Organics

Conducting polymers modified with redox-active moieties or amphiphilic surfactants are promising adsorbent materials for the separation of neutral organic species from water. We develop an asymmetric system combining a polyvinylferrocene-polypyrrole hybrid (PVF-PPy) and an amphiphilic surfactant dioctyl sulfosuccinate (AOT)-doped polypyrrole (PPy(AOT)) that have complementary hydrophobicity tunability in response to electrochemical modulations. Both materials are hydrophobic in their respective neutral states, exhibiting high affinities toward organics. Upon application of a mild potential to oxidize PVF-PPy and reduce PPy(AOT), these polymers can be simultaneously rendered hydrophilic, thereby driving desorption of organics and regeneration of the materials. The asymmetric system can be used in a cyclic fashion, through repeated electrical shorting of the two electrodes to program the capture of organics from a large volume of feed solution, and application of a potential (above 0.9 V) to stimulate the release of the adsorbed organics into a small volume of desorption solution. The asymmetric configuration has multiple benefits, including suppression of water parasitic reactions, high energetic efficiency, and selectivity for target organic species. Therefore, the electrode system has the potential to reduce the energy consumption in the mitigation of organic contaminants over conventional methods, with the additional ability to recover valuable organic products, opening up new possibilities for addressing the water-energy nexus.

Efficient Removal of Polycyclic Aromatic Hydrocarbons and Heavy Metals from Water by Electrospun Nanofibrous Polycyclodextrin Membranes

Here, a highly efficient membrane based on electrospun polycyclodextrin (poly-CD) nanofibers was prepared and exploited for the scavenging of various polycyclic aromatic hydrocarbons (PAHs) and heavy metals from water. The poly-CD nanofibers were produced by the electrospinning of CD molecules in the presence of a cross-linker (i.e., 1,2,3,4-butanetetracarboxylic acid), followed by heat treatment to obtain an insoluble poly-CD nanofibrous membrane. The membrane was used for the removal of several PAH compounds (i.e., acenaphthene, fluorene, fluoranthene, phenanthrene, and pyrene) and heavy metals (i.e., Pb²⁺, Ni²⁺, Mn²⁺, Cd²⁺, Zn²⁺, and Cu²⁺) from water over time. Experiments were made on the batch sorption of PAHs and heavy metals from contaminated water to explore the binding affinity of PAHs and heavy metals to the poly-CD membrane. The equilibrium sorption capacity (q _e) of the poly-CD nanofibrous membrane was found to be 0.43 ± 0.045 mg/g for PAHs and 4.54 ± 0.063 mg/g for heavy metals, and the sorption kinetics fitted well with the pseudo-second-order model for both types of pollutants. The membrane could be recycled after treatment with acetonitrile or a 2% nitric acid solution and reused up to four times with similar performance. Further, dead-end filtration experiments showed that the PAH removal efficiencies were as high as 92.6 ± 1.6 and 89.9 ± 4.8% in 40 s for the solutions of 400 and 600 μg/L PAHs, respectively. On the other hand, the removal efficiencies for heavy metals during the filtration were 94.3 ± 5.3 and 72.4 ± 23.4% for 10 and 50 mg/L solutions, respectively, suggesting rapid and efficient filtration of heavy metals and PAHs by the nanofibrous poly-CD membrane.

Inorganic and Hybrid (Organic⁻Inorganic) Lamellar Materials for Heavy metals and Radionuclides Capture in Energy Wastes Management-A Review

The energy industry (nuclear, battery, mining industries, etc.) produces a large quantity of hazardous effluents that may contain radionuclides (¹³⁷Cs and ⁹⁰Sr in particular) and heavy metals. One of the hardest tasks of environmental safety and sustainable development is the purification of wastewater holding these pollutants. Adsorption is one of the most powerful methods for extracting toxic compounds from wastewater. This study reviews the usefulness of clay minerals as adsorbent for removing these hazardous elements to clean up energy production processes. Phyllosilicates are able to extract several heavy metals from effluent, as widely examined. A particular focus is given to synthetic phyllosilicates and their abilities to entrap heavy metals with a special attention paid to those synthesized by sol-gel route. Indeed, this method is attractive since it allows the development of organic–inorganic hybrids from organosilanes presenting various functions (amino, thiol, etc.) that can interact with pollutants. Regarding these pollutants, a part of this review focuses on the interaction of lamellar materials (natural and synthetic phyllosilicates as well as layered double hydroxide) with heavy metals and another part deals with the adsorption of specific radionuclides, cesium and strontium.