Biomimetic Sensing System for Tracing Pb2+ Distribution in Living Cells Based on the Metal-Peptide Supramolecular Assembly

Development of a novel fluorescent protein-based probe for efficient detection of Pb2+ in serum inspired by the metalloregulatory protein PbrR691

BACKGROUND

The accurate and rapid detection of blood lead concentration is of paramount importance for assessing human lead exposure levels. Fluorescent protein-based probes, known for their high detection capabilities and low toxicity, are extensively used in analytical sciences. However, there is currently a shortage of such probes designed for ultrasensitive detection of Pb2+, and no reported probes exist for the quantitative detection of Pb2+ in blood samples. This study aims to fill this critical void by developing and evaluating a novel fluorescent protein-based probe that promises accurate and rapid lead quantification in blood.

RESULTS

A simple and small-molecule fluorescent protein-based probe was successfully constructed herein using a peptide PbrBD designed for Pb2+ recognition coupled to a single fluorescent protein, sfGFP. The probe retains a three-coordinate configuration to identify Pb2+ and has a high affinity for it with a Kd' of 1.48 ± 0.05 × 10-17 M. It effectively transfers the conformational changes of the peptide to the chromophore upon Pb2+ binding, leading to fast fluorescence quenching and a sensitive response to Pb2+. The probe offers a broad dynamic response range of approximately 37-fold and a linear detection range from 0.25 nM to 3500 nM. More importantly, the probe can resist interference of metal ions in living organisms, enabling quantitative analysis of Pb2+ in the picomolar to millimolar range in serum samples with a recovery percentage of 96.64%-108.74 %.

SIGNIFICANCE

This innovative probe, the first to employ a single fluorescent protein-based probe for ultrasensitive and precise analysis of Pb2+ in animal and human serum, heralds a significant advancement in environmental monitoring and public health surveillance. Furthermore, as a genetically encoded fluorescent probe, this probe also holds potential for the in vivo localization and concentration monitoring of Pb2+.

Engineered DNA molecular machine for ultrasensitive detection of environmental lead pollution

Dynamic monitoring of environmental Pb2+ is of utmost importance for food safety and personal well-being. Herein, we report a novel, rapid, and practical fluorescence detection platform for Pb2+. The platform comprises two essential components: an engineered DNAzyme probe (EDP) and a responsive functionalized probe (RFP). The EDP demonstrates specific recognition of Pb2+ and the subsequent release of free DNA fragments. The released DNA fragments are then captured using the RFP to form DNA complexes, which undergo multiple cascade amplification reactions involving polymerases and nickases, resulting in the generation of a large number of fluorescence signals. These signals can detect Pb2+ at concentrations as low as 0.114 nmol/L, with a dynamic range spanning from 0.1 nmol/L to 50 nmol/L. Moreover, the platform exhibits excellent sensitivity and selectivity for Pb2+ detection. To further validate its effectiveness, we successfully quantitatively detected lead contamination in water from Chaohu Lake, and the results aligned closely with those obtained using inductively coupled plasma-mass spectrometry (ICP-MS). Moreover, this platform is suitable for detecting Pb2+ in seawater, soil, and fish samples. These findings confirm the suitability of the current detection platform for the dynamic assessment of Pb contamination in ecological environments, thereby contributing to environmental and food safety.

Molecularly Targeted Fluorescent Sensors for Visualizing and Tracking Cellular Senescence

Specific identification and monitoring of senescent cells are essential for the in-depth understanding and regulation of senescence-related life processes and diseases. Fluorescent sensors providing real-time and in situ information with spatiotemporal resolution are unparalleled tools and have contributed greatly to this field. This review focuses on the recent progress in fluorescent sensors for molecularly targeted imaging and real-time tracking of cellular senescence. The molecular design, sensing mechanisms, and biological activities of the sensors are discussed. The sensors are categorized by the types of markers and targeting ligands. Accordingly, their molecular recognition and fluorescent performance towards senescence biomarkers are summarized. Finally, the perspective and challenges in this field are discussed, which are expected to assist future design of next-generation sensors for monitoring cellular senescence.

Development of ratiometric fluorescent probes based on peptides for sensing Pb2+ in aquatic environments and human serum

The detection of Pb²⁺ ions in aquatic environments and biofluid samples is crucial for assessment of human health. Herein, we synthesized two fluorescent probes (1 and 2) consisting of the peptide receptor for Pb²⁺ and a benzothiazolyl-cyanovinylene fluorophore that exhibited excimer-like emission when it aggregated. The peptide-based probes sensitively detected Pb²⁺ in purely aqueous solution (1% DMF) through ratiometric fluorescent response with a decrease in monomer emission at 520 nm and an increase in excimer emission at 570 nm. Specially, probe 2 showed remarkable detection features such as high selectivity for Pb²⁺over 15 metal ions, high binding affinity (K_d = 5.83 × 10^-7 M) for Pb²⁺, significant emission intensity changes, low detection limit (3.8 nM) of Pb²⁺, high water solubility, and visible light excitation (450 nm). Probe 2 was successfully used to quantify nanomolar concentration (0 ∼ 800 nM) of Pb²⁺ in real water samples (ground water and tap water). Specially, 2 was successfully applied for the quantification of Pb²⁺ in human serum by combination of microwave-assisted human serum digestion and filtration of digested serum by anion exchange cartridge. We clearly investigated the binding mode of 2 with Pb²⁺ using ¹H NMR, IR spectroscopy, pH titration, confocal microscopy, and size analysis. The peptide-based fluorescent probe might have great application potential for sensing Pb²⁺ in aquatic environments and biofluid samples.

Peptide-derived coordination frameworks for biomimetic and selective separation

Peptide-derived metal-organic frameworks (PMOFs) have emerged as a class of biomimetic materials with attractive performances in analytical and bioanalytical chemistry. The incorporation of biomolecule peptides gives the frameworks conformational flexibility, guest adaptability, built-in chirality, and molecular recognition ability, which greatly accelerate the applications of PMOFs in enantiomeric separation, affinity separation, and the enrichment of bioactive species from complicated samples. This review focuses on the recent advances in the engineering and applications of PMOFs in selective separation. The unique biomimetic size-, enantio-, and affinity-selective performances for separation are discussed along with the chemical structures and functions of MOFs and peptides. Updates of the applications of PMOFs in adaptive separation of small molecules, chiral separation of drug molecules, and affinity isolation of bioactive species are summarized. Finally, the promising future and remaining challenges of PMOFs for selective separation of complex biosamples are discussed.

Ratiometric Fluorescence Sensing System for Lead Ions Based on Self-Assembly of Bioprobes Triggered by Specific Pb2+-Peptide Interactions

Lead is one of the most toxic substances. However, there are few ratiometric fluorescent probes for sensing Pb2+ in aqueous solution as well as living cells because specific ligands for Pb2+ ions have not been well characterized. Considering the interactions between Pb2+ and peptides, we developed ratiometric fluorescent probes for Pb2+ based on the peptide receptor in two steps. First, we synthesized fluorescent probes (1-3) based on the tetrapeptide receptor (ECEE-NH2) containing hard and soft ligands by conjugation with diverse fluorophores that showed excimer emission when they aggregated. After investigation of fluorescent responses to metal ions, benzothiazolyl-cyanovinylene was evaluated as an appropriate fluorophore for ratiometric detection of Pb2+. Next, we modified the peptide receptor to decrease the number of hard ligands and/or to replace Cys with disulfide bond and methylated Cys for improving selectivity and cell permeability. From this process, we developed two fluorescent probes (3 and 8) among the probes (1-8) that exhibited remarkable ratiometric sensing properties for Pb2+ including high water solubility (≤2% DMF), visible light excitation, high sensitivity, selectivity for Pb2+, low detection limits (<10 nM), and fast response (<6 min). The binding mode study revealed that specific Pb2+-peptide interactions of the probes caused nanosized aggregates in which the fluorophores of the probes came close each other, exhibiting excimer emission. In particular, 8 based on tetrapeptide bearing a disulfide bond and two carboxyl groups with a good permeability successfully quantified intracellular uptake of Pb2+ in live cells through ratiometric fluorescent signals. The ratiometric sensing system based on specific metal-peptide interactions and excimer emission process could provide a valuable tool to quantify Pb2+ in live cells and pure aqueous solutions.

Self-Supplied Electron Photoelectrochemical Biosensor with PTB7-Th as a Photoelectric Material and Biotin as an Efficient Quencher

In this work, a self-supplied electron photoelectrochemical (PEC) biosensor for sensitive determination of Pb²⁺ was established by utilizing donor-acceptor (D-A)-type PTB7-Th (poly{4,8-bis[5-(2-ethylhexyl) thiophen-2-yl]benzo[1,2-b,4,5-b']dithiophene-2,6-diyl-alt-3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno[3,4-b]-thiophene-4,6-diyl}) as a photoelectric material coupled with biotin as an efficient signal quencher. Impressively, compared with the traditional PEC signal quenchers, biotin was first applied as a PEC signal quencher in this work and it effectively avoided a cumbersome preparation process, complex DNA sequence design, and extra reagent assistance and greatly simplified experimental steps, which could achieve an efficient PEC signal quenching toward PTB7-Th. In addition, the execution of a DNAzyme-assisted Pb²⁺ recycling amplification reaction could release the quencher biotin, leading to the recovery of the PEC signal, thereby realizing the quantitative detection of Pb²⁺. Resultantly, the submitted self-supplied electron PEC biosensor presented an extensive coverage of assay Pb²⁺ (50 fM to 500 nM) along with a low determination limit (16.7 fM), which exhibited the advantages of high selectivity and excellent stability. Importantly, this work provided a powerful alternative to traditional heavy metal-ion assessment methods and possessed the potential for application in environment, biomedicine, and food-safety fields.

Recent Advances in Nanomaterials of Group XIV Elements of Periodic Table in Breast Cancer Treatment

Breast cancer is one of the most common malignancies and a leading cause of cancer-related mortality among women worldwide. The elements of group XIV in the periodic table exhibit a wide range of chemical manners. Recently, there have been remarkable developments in the field of nanobiomedical research, especially in the application of engineered nanomaterials in biomedical applications. In this review, we concentrate on the recent investigations on the antiproliferative effects of nanomaterials of the elements of group XIV in the periodic table on breast cancer cells. In this review, the data available on nanomaterials of group XIV for breast cancer treatment has been documented, providing a useful insight into tumor biology and nano-bio interactions to develop more effective nanotherapeutics for cancer patients.

Fabrication of 2D nanosheet sorbents through metastable emulsion droplets and subsequent two-step grafting polymerization for efficient blood lead removal in vitro

Hemoperfusion is a powerful and yet simple method for lead poisoning treatment, but creation of safe and effective sorbents with excellent selectivity remains a real challenge. To address this, we here construct 2D nanosheet sorbents (BM-SH) through metastable emulsion droplets and subsequent two-step grafting polymerization for efficient blood lead removal in vitro. Metastable emulsion droplets endow typical nanosized sheet-like structure (thickness of 30 nm) and relatively round shape. The consecutive two grafting processes using hydroxyethyl methacrylate (HEMA) and L-cysteine monomer (D-SH) provide BM-SH with a high density of accessible binding sites towards lead ions (Pb²⁺). A high adsorption capacity of 390.5 mg g^-1 and quick capture 97.35 % of Pb²⁺ within initial 10 min are obtained, surpassing most of the reported sorbents for lead removal. Besides, adsorption distribution coefficient (K_d) of BM-SH among four coexisting metal ions achieved 7792 mL g^-1, showing outstanding selectivity toward Pb²⁺. Importantly, a possible adsorption mechanism is recognized as coordination with carboxyl, sulfydryl and imino groups from L-cysteine, and mercapto ligand as the key chelating agent may be the reason for high Pb²⁺ affinity. And what's more, BM-SH displays good hemocompatibility and high efficiency of blood lead removal rate (above 86 % in vitro).

Metal-Organic Framework Accelerated One-Step Capture and Reduction of Palladium to Catalytically Active Nanoparticles

Recovery of noble metals and in situ transforming to functional materials hold great promise in the sustainability of natural resources but remain as a challenge. Herein, the variable chemical microenvironments created by the inorganic-organic hybrid composition of metal-organic frameworks (MOFs) were exploited to tune the metal-support interactions, thus establishing an integrated strategy for recovering and reducing palladium (Pd). Assisted by sonic waves and alcoholic solvent, selective capture of Pd(II) from a complicated matrix to directly afford Pd nanoparticles (NPs) in MOFs can be achieved in one step within several minutes. Mechanism investigation reveals that the Pd binding site and the energy barriers between ionic and metallic status are sensitive to chemical environments in different frameworks. Thanks to the clean, dispersive, and uniform nature of Pd NPs, Pd@MOFs synthesized from a complicated environment exhibited high catalytic activity toward 4-nitrophenol reduction and Suzuki coupling reactions.

Recent Advances in Peptides-Based Stimuli-Responsive Materials for Biomedical and Therapeutic Applications: A Review

Smart materials are engineered materials that have one or more properties that are introduced in a controlled fashion by surrounding stimuli. Engineering of biomacromolecules like proteins into a smart material call for meticulous artistry. Peptides have grabbed notable attention as a preferred source for smart materials in the medicinal field, promoted by their versatile chemical and biophysical attributes of biocompatibility, and biodegradability. Recent advances in the synthesis of multifunctional peptides have proliferated their application in diverse domains: agriculture, nanotechnology, medicines, biosensors, therapeutics, and soft robotics. Stimuli such as pH, temperature, light, metal ions, and enzymes have vitalized physicochemical properties of peptides by augmented sensitivity, stability, and selectivity. This review elucidates recent (2018-2021) advances in the design and synthesis of smart materials, from stimuli-responsive peptides followed by their biomedical and therapeutic applications.

A novel AIEE active anti-B18H22derivative-based Cu2+and Fe3+fluorescence off-on-off sensor

A novel fluorescence sensor for successive detection of Cu²⁺and Fe³⁺based on anti-B₁₈H₂₂derivative which possesses 5-hydroxyisoquinoline as an ionophore was synthesized via a one-pot and its structure and photophysical properties were characterized by NMR, HRMS, FTIR, UV-vis, PL and theoretical calculation. The fluorophore displays two emission peaks at 460 nm and 670 nm in THF solution coming from the emission of the locally excited state and intramolecular charge transfer fluorescence, respectively. The complex exhibited obvious aggregation-induced emission enhancement (AIEE) characteristics in THF/H₂O solution by increasing the aqueous concentration from 70% to 95%. The AIEE molecules showed a high selectivity towards Cu²⁺over other metal ions by forming a 2:1 metal-to-ligand complex in THF/H₂O (fw = 20%) solution, the fluorescence intensity increased as a linear function of the Cu²⁺concentration at 460 nm due to the inhibition of PET effect. The fluorescent emission was quenched linearly by the addition of Fe³⁺, which provides a method for successive determination of Cu²⁺and Fe³⁺based on 'off-on-off' fluorescence of the fluorescent. The detection limit of Cu²⁺and Fe³⁺was 5.7 × 10^-6M and 7.2 × 10^-5M respectively. Morever, a rapid identification of Cu²⁺in the aqueous solution by naked eyes can be realized. In addition, the molecules were pH-sensitive, the fluorescence quenching can be observed in strongly alkaline environment. The method has been applied to the determination of copper ions in water samples with satisfactory results.

Mapping the Morphological Landscape of Oligomeric Di-block Peptide-Polymer Amphiphiles

Peptide-polymer amphiphiles (PPAs) are tunable hybrid materials that achieve complex assembly landscapes by combining the sequence-dependent properties of peptides with the structural diversity of polymers. Despite their promise as biomimetic materials, determining how polymer and peptide properties simultaneously affect PPA self-assembly remains challenging. We herein present a systematic study of PPA structure-assembly relationships. PPAs containing oligo(ethyl acrylate) and random-coil peptides were used to determine the role of oligomer molecular weight, dispersity, peptide length, and charge density on self-assembly. We observed that PPAs predominantly formed spheres rather than anisotropic particles. Oligomer molecular weight and peptide hydrophilicity dictated morphology, while dispersity and peptide charge affected particle size. These key benchmarks will facilitate the rational design of PPAs that expand the scope of biomimetic functionality within assembled soft materials.

Structural and photoactive properties of self-assembled peptide-based nanostructures and their optical bioapplication in food analysis

BACKGROUND

Food processing plays an important role in the modern industry because food quality and security directly affect human health, life safety, and social and economic development. Accurate, efficient, and sensitive detection technology is the basis for ensuring food quality and security. Optosensor-based technology with the advantage of fast and visual real-time detection can be used to detect pesticides, metal ions, antibiotics, and nutrients in food. As excellent optical centres, self-assembled peptide-based nanostructures possess attractive advantages, such as simple preparation methods, controllable morphology, tunable functionality, and inherent biocompatibility.

AIM OF REVIEW

Self-assembled peptide nanostructures with good fabrication yield, stability, dispersity in a complex sample matrix, biocompatibility, and environmental friendliness are ideal development goals in the future. Owing to its flexible and unique optical properties, some short peptide self-assemblies can possibly be used to achieve the purpose of rapid and sensitive detection of composition in food, agriculture, and the environment, expanding the understanding and application of peptide-based optics in analytical chemistry.

KEY SCIENTIFIC CONCEPT OF REVIEW

The self-assembly process of peptides is driven by noncovalent interactions, including hydrogen bonding, electrostatic interactions, hydrophobic interactions, and π-π stacking, which are the key factors for obtaining stable self-assembled peptide nanostructures with peptides serving as assembly units. Controllable morphology of self-assembled peptide nanostructures can be achieved through adjustment in the type, concentration, and pH of organic solvents and peptides. The highly ordered nanostructures formed by the self-assembly of peptides have been proven to be novel biological structures and can be used for the construction of optosensing platforms in biological or other systems. Optosensing platforms make use of signal changes, including optical signals and electrical signals caused by specific reactions between analytes and active substances, to determine the content or concentration of an analyte.

Supramolecular Assembly with Aggregation-Induced Emission Property for Sensing and Detection

The fabrication of new supramolecular materials for real-time detection of analytes including ions, organic pollutants, gases, biomolecules, and drugs is of pivotal importance in industrial manufacture, clinical treatment, and environmental remediation. Incorporating fluorescent molecules with distinct aggregation-induced emission (AIE) effects into supramolecular assemblies has received much attention over the past two decades, owing to the remarkable performance of the AIE-active supramolecular materials in sensing and detection. In this minireview, we summarize the recent progress of superior detection systems on the basis of supramolecular assemblies accompanied with AIE features. We envision that this minireview will be helpful and timely for relevant researchers to stimulate new thinking for constructing new AIE-based supramolecular materials with advanced architectures for effective sensing and detection.

Peptide-based system for sensing Pb2+ and molecular logic computing

Peptides with recognition, assembly, various activities exhibit strong power and application prospects in sensing, material science, biomedicine. However, peptide-based sensing and expanding application is still at an early stage. Herein, a peptide-based sensing and logic system was developed for highly sensitive and selective detection of Pb²⁺ and implementation of logic operations. Our Pb²⁺ assay method was ultra-rapid (less than 1 min), direct, simple with detection limit of 0.75 nM. Flexibility and scalability of peptide-based solution system facilitated the execution of sensing and logic operations from simple to complex. This research will not only inspire discovery and comprehensive applications (such as sensing and assembly) of more functional peptides, but also provide more opportunities for development and design of peptide-based systems and molecular information technologies.

Peptide-Engineered Fluorescent Nanomaterials: Structure Design, Function Tailoring, and Biomedical Applications

Fluorescent nanomaterials have exhibited promising applications in biomedical and tissue engineering fields. To improve the properties and expand bioapplications of fluorescent nanomaterials, various functionalization and biomodification strategies have been utilized to engineer the structure and function of fluorescent nanomaterials. Due to their high biocompatibility, satisfied bioactivity, unique biomimetic function, easy structural tailoring, and controlled self-assembly ability, supramolecular peptides are widely used as versatile modification agents and nanoscale building blocks for engineering fluorescent nanomaterials. In this work, recent advance in the synthesis, structure, function, and biomedical applications of peptide-engineered fluorescent nanomaterials is presented. Firstly, the types of different fluorescent nanomaterials are introduced. Then, potential strategies for the preparation of peptide-engineered fluorescent nanomaterials via templated synthesis, bioinspired conjugation, and peptide assembly-assisted synthesis are discussed. After that, the unique structure and functions through the peptide conjugation with fluorescent nanomaterials are demonstrated. Finally, the biomedical applications of peptide-engineered fluorescent nanomaterials in bioimaging, disease diagnostics and therapy, drug delivery, tissue engineering, antimicrobial test, and biosensing are presented and discussed in detail. It is helpful for readers to understand the peptide-based conjugation and bioinspired synthesis of fluorescent nanomaterials, and to design and synthesize novel hybrid bionanomaterials with special structures and improved functions for advanced applications.

Review of recent progress on DNA-based biosensors for Pb2+ detection

Lead (Pb) is a highly toxic heavy metal of great environmental and health concerns, and interestingly Pb²⁺ has played important roles in nucleic acids chemistry. Since 2000, using DNA for selective detection of Pb²⁺ has become a rapidly growing topic in the analytical community. Pb²⁺ can serve as the most active cofactor for RNA-cleaving DNAzymes including the GR5, 17E and 8-17 DNAzymes. Recently, Pb²⁺ was found to promote a porphyrin metalation DNAzyme named T30695. In addition, Pb²⁺ can tightly bind to various G-quadruplex sequences inducing their unique folding and binding to other molecules such as dyes and hemin. The peroxidase-like activity of G-quadruplex/hemin complexes was also used for Pb²⁺ sensing. In this article, these Pb²⁺ recognition mechanisms are reviewed from fundamental chemistry to the design of fluorescent, colorimetric, and electrochemical biosensors. In addition, various signal amplification mechanisms such as rolling circle amplification, hairpin hybridization chain reaction and nuclease-assisted methods are coupled to these sensing methods to drive up sensitivity. We mainly cover recent examples published since 2015. In the end, some practical aspects of these sensors and future research opportunities are discussed.

Halogen Bonds Fabricate 2D Molecular Self-Assembled Nanostructures by Scanning Tunneling Microscopy

Halogen bonds are currently new noncovalent interactions due to their moderate strength and high directionality, which are widely investigated in crystal engineering. The study about supramolecular two-dimensional architectures on solid surfaces fabricated by halogen bonding has been performed recently. Scanning tunneling microscopy (STM) has the advantages of realizing in situ, real-time, and atomic-level characterization. Our group has carried out molecular self-assembly induced by halogen bonds at the liquid–solid interface for about ten years. In this review, we mainly describe the concept and history of halogen bonding and the progress in the self-assembly of halogen-based organic molecules at the liquid/graphite interface in our laboratory. Our focus is mainly on (1) the effect of position, number, and type of halogen substituent on the formation of nanostructures; (2) the competition and cooperation of the halogen bond and the hydrogen bond; (3) solution concentration and solvent effects on the molecular assembly; and (4) a deep understanding of the self-assembled mechanism by density functional theory (DFT) calculations.

Harnessing Peptides against lead pollution and poisoning: Achievements and prospects

Among the broad applicability of peptides in numerous aspects of life and technologies, their interactions with lead (Pb), one of the most harmful substances to the environment and health, are constantly explored. So far, peptides were developed for environmental remediation of Pb-contaminations by various strategies such as hydrogelation and surface display. They were also designed for Pb detection and sensing by electrochemical and fluorescent methods and for modeling natural proteins that involve in mechanisms by which Pb is toxic. This review aims at summarizing selected examples of these applications, manifesting the enormous potential of peptides in the combat against Pb pollution. Nevertheless, the absence of new medicinal treatments against Pb poisoning that are based on peptides is noticeable. An overview of previous achievements utilizing Pb-peptide interactions towards various goals is presented and can be therefore leveraged to construct a useful toolbox for the design of smart peptides as next-generation therapeutics against Pb.

High-performance FRET biosensors for single-cell and in vivo lead detection

Forms of lead (Pb) have been insidiously invading human life for thousands of years without obvious signs of their considerable danger to human health. Blood lead level (BLL) is the routine measure used for diagnosing the degree of lead intoxication, although it is unclear whether there is any safe range of BLL. To develop a practical detection tool for living organisms, we engineered a genetically encoded fluorescence resonance energy transfer (FRET)-based Pb²⁺ biosensor, 'Met-lead 1.44 M1', with excellent performance. Met-lead 1.44 M1 has an apparent dissociation constant (K_d) of 25.97 nM, a detection limit (LOD) of 10 nM (2.0 ppb/0.2 μg/dL), and an enhancement dynamic ratio of nearly ~ 5-fold upon Pb²⁺ binding. The 10 nM sensitivity of Met-lead 1.44 M1 is five times below the World Health Organization-permitted level of lead in tap water (10 ppb; WHO, 2017), and fifteen times lower than the maximum BLL for children (3 μg/dL). We deployed Met-lead 1.44 M1 to measure Pb²⁺ concentrations in different living models, including two general human cell lines and one specific line, induced pluripotent stem cell (iPSC)-derived cardiomyocytes, as well as in widely used model species in plant (Arabidopsis thaliana) and animal (Drosophila melanogaster) research. Our results suggest that this new biosensor is suitable for lead toxicological research in vitro and in vivo, and will pave the way toward potential applications for both low BLL measures and rapid detection of environmental lead in its divalent form.

Multi-Stimuli Responsive FRET Processes of Bifluorophoric AIEgens in an Amphiphilic Copolymer and Its Application to Cyanide Detection in Aqueous Media

A novel amphiphilic aggregation-induced emission (AIE) copolymer, that is, poly(NIPAM-co-TPE-SP), consisting of N-isopropylacrylamide (NIPAM) as a hydrophilic unit and a tetraphenylethylene-spiropyran monomer (TPE-SP) as a bifluorophoric unit is reported. Upon UV exposure, the close form of non-emissive spiropyran (SP) in poly(NIPAM-co-TPE-SP) can be photo-switched to the open form of emissive merocyanine (MC) in poly(NIPAM-co-TPE-MC) in an aqueous solution, leading to ratiometric fluorescence of AIEgens between green TPE and red MC emissions at 517 and 627 nm, respectively, via Förster resonance energy transfer (FRET). Distinct FRET processes of poly(NIPAM-co-TPE-MC) can be observed under various UV and visible light irradiations, acid-base conditions, thermal treatments, and cyanide ion interactions, which are also confirmed by theoretical studies. The subtle perturbations of environmental factors, such as UV exposure, pH value, temperature, and cyanide ion, can be detected in aqueous media by distinct ratiometric fluorescence changes of the FRET behavior in the amphiphilic poly(NIPAM-co-TPE-MC). Moreover, the first FRET sensor polymer poly(NIPAM-co-TPE-MC) based on dual AIEgens of TPE and MC units is developed to show a very high selectivity and sensitivity with a low detection limit (LOD = 0.26 μM) toward the cyanide ion in water, which only contain an approximately 1% molar ratio of the bifluorophoric content and can be utilized in cellular bioimaging applications for cyanide detections.

Recent Advances in AIEgens for Metal Ion Biosensing and Bioimaging

Metal ions play important roles in biological system. Approaches capable of selective and sensitive detection of metal ions in living biosystems provide in situ information and have attracted remarkable research attentions. Among these, fluorescence probes with aggregation-induced emission (AIE) behavior offer unique properties. A variety of AIE fluorogens (AIEgens) have been developed in the past decades for tracing metal ions. This review highlights recent advances (since 2015) in AIE-based sensors for detecting metal ions in biological systems. Major concerns will be devoted to the design principles, sensing performance, and bioimaging applications.