Acrylic Acid-Functionalized Metal-Organic Frameworks for Sc(III) Selective Adsorption

g-C3N4 modified natural low-grade dolomite-palygorskite: Removal capacity and adsorption mechanism for Gd3

Rare earth elements (REEs) pose significant environmental challenges due to the wastewater generated during their extraction. Developing efficient adsorbents with simple, economical and eco-friendly methods for removing and recovering REEs from wastewater is highly demanded but full of challenges. This study creates a novel adsorbent (g-C3N4/0.5DPal) for efficient REEs removal and recovery by integrating the low-grade mineral dolomite-palygorskite with g-C3N4 through a "one-pot" calcination method. Characterization techniques including SEM, XRD, FT-IR, XPS, etc., were employed to analyze the structure of the g-C3N4/0.5DPal composite. Batch adsorption experiments focusing on Gd3+ from among the REEs were conducted to evaluate the adsorption performance. The results reveal a remarkable 3.34 times increase in Gd3+ adsorption capacity of g-C3N4/0.5DPal (192.46 mg/g) compared to raw dolomite-palygorskite (57.62 mg/g) at 298 K, highlighting the effectiveness of the modification. The adsorption mechanism involves electrostatic interactions, surface complexation, and cation-π interactions. It is worth noting that g-C3N4 facilitates the conversion of dolomite to calcite during the preparation process, enhancing the Gd3+ adsorption of g-C3N4/0.5DPal. This work offers a promising solution for the removal and recovery of REEs and the high-value utilization of low-grade minerals, addressing both environmental concerns and resource sustainability.

Constructing Two-Dimensional (2D) Heterostructure Channels with Engineered Biomembrane and Graphene for Precise Scandium Sieving

The special properties of rare earth elements (REE) have effectively broadened their application fields. How to accurately recognize and efficiently separate target rare earth ions with similar radii and chemical properties remains a formidable challenge. Here, precise two-dimensional (2D) heterogeneous channels are constructed using engineered E. coli membranes between graphene oxide (GO) layers. The difference in binding ability and corresponding conformational change between Lanmodulin (LanM) and rare earth ions in the heterogeneous channel allows for precisely recognizing and sieving of scandium ions (Sc3+). The engineered E. coli membranes not only can protect the integrity of structure and functionality of LanM, the rich lipids and sugars, but also help the Escherichia coli (E. coli) membranes closely tile on the GO nanosheets through interaction, preventing swelling and controlling interlayer spacing accurately down to the sub-nanometer. Apparently, the 2D heterogeneous channels showcase excellent selectivity for trivalent ions (SFFe /Sc≈3), especially for Sc3+ ions in REE with high selectivity (SFCe/Sc≈167, SFLa/Sc≈103). The long-term stability and tensile strain tests verify the membrane's outstanding stability. Thus, this simple, efficient, and cost-effective work provides a suggestion for constructing 2D interlayer heterogeneous channels for precise sieving, and this valuable strategy is proposed for the efficient extraction of Sc.

Insight into the Structure of MOF-Containing Hybrid Polymeric Microspheres

Polymer science exploited metal organic frameworks (MOFs) for various purposes, which is due to the fact that these materials are ideal platforms for identifying design features for advanced functional materials. The mechanism of polymerization using MOFs, is still largely unexplored and the detailed characterization of both materials in essential to understand the important interactions between the components. In this work modern advanced research methods were used to investigate the properties of MOF-containing hybrid polymeric microspheres. Hydrothermal conversion of CFA-derived iron particles was used to obtain MOF nanostructures, which were then introduced to the structure of hybrid polymer microspheres based on ethylene glycol dimethylacrylate (EGDMA) and triethoxyvinylsilane (TEVS). Chemical structures were confirmed by ATR-FTIR method. To provide information about the elemental composition of the tested materials and for the determination of chemical bonds present in the tested samples XPS method was applied. Morphology was studied using SEM microscopy, whereas porosity was investigated using ASAP technique. Swellability coefficients were determined using typical organic solvents and distilled water. Moreover, the ecological aspect concerning the use of fly ashes deserves to be emphasized.

Phosphonic Acid-Functionalized MIL-53(Al) As an Efficient Sorbent for Trace Rare Earth Elements Preconcentration, Storage and Their Determination by X-ray Fluorescence Spectrometry

In this work, a simple and novel method coupling solid phase extraction (SPE) with X-ray fluorescence spectrometry (XRF) is proposed for the simultaneous determination of 15 kinds of trace rare earth elements (REEs) in water samples. A phosphonic acid functionalized metal-organic framework named BPG-MIL-53(Al) was prepared via postsynthetic modification and served as an efficient adsorbent for these REEs. The prepared BPG-MIL-53(Al) could almost completely adsorb REEs in 5 min under neutral conditions. After filtration, REEs-adsorbed BPG-MIL-53(Al) was deposited on a filter membrane to form a thin film, which was directly analyzed by XRF. The XRF intensities of the REEs-retained MOF disc remained almost unchanged after six months. Taking advantage of this strategy, XRF was able to quantitate ng mL-1 levels of REEs in water samples, achieving impressive limits of detection in the range of 0.4-4.7 ng mL-1. The proposed method was applied to the on-site collection and analysis of REEs in real water samples with desirable accuracy and spike recoveries obtained.

Cryptands on a Solid Support for the Separation of Europium from Gadolinium

With the great demand for europium in green-energy technologies comes the need for innovative methods to isolate the elements. We introduce a solid-liquid extraction method using a 2.2.2-cryptand-modified solid support to separate europium from gadolinium using their differences in electrochemical potential. The method overcomes challenges associated with the separation of those two ions that have similar coordination chemistry in the +3 oxidation state. A competitive adsorption study in the cryptand system between EuII/EuIII and GdIII shows greater affinity for EuII relative to GdIII. After separation from GdIII, Eu was released by oxidizing EuII to EuIII with 99.3% purity. The purity of separated Eu is unaffected by pH between pH 3.0 and 5.5. Overall, we demonstrate that by modifying a solid support with 2.2.2-cryptand, divalent europium can be separated from trivalent gadolinium based on the differences of affinities of 2.2.2-cryptand for the two ions.

Tuning the Dual Active Sites of Functionalized UiO-66 for Selective Adsorption of Yb(III)

The recovery of rare earth elements (REEs) from discharged electronic devices or mineral waste water is highly essential but still facing challenges. In this work, two amino-functionalized carboxyl-UiO-66 (UiO-66-COOH-TETA and UiO-66-(COOH)₂-ED) prepared via the postmodification method were employed as the adsorbents for Yb(III) capture. The experimental results revealed their superior adsorption capacities of 161.5 and 202.6 mg/g, respectively. Meanwhile, their adsorption processes can be described by the pseudo-second-order kinetic model and Langmuir model. Effects of initial pH and temperature on adsorptions were systematically evaluated, affording an optimal operating condition (i.e., pH of 5.5-6, T of 65 °C, t of 10 h). Moreover, the fabricated materials exhibited great reusability after five adsorption-regeneration cycles. UiO-66-COOH-TETA demonstrated good separation selectivity for Yb(III) over light REEs (i.e., 3.98 of Yb/Ce, 3.51 of Yb/Nd). Based on the density functional theory calculations and characterization analysis (XPS, Zeta, mapping, and IR), the adsorption mechanisms were mainly attributed to significant electrostatic attraction and strong surface complexation between N and O sites and Yb(III).

Lanmodulin-Functionalized Magnetic Nanoparticles as a Highly Selective Biosorbent for Recovery of Rare Earth Elements

Recovering rare earth elements (REEs) from waste streams represents a sustainable approach to diversify REE supply while alleviating the environmental burden. However, it remains a critical challenge to selectively separate and concentrate REEs from low-grade waste streams. In this study, we developed a new type of biosorbent by immobilizing Lanmodulin-SpyCatcher (LanM-Spycatcher) on the surface of SpyTag-functionalized magnetic nanoparticles (MNPs) for selective separation and recovery of REEs from waste streams. The biosorbent, referred to as MNP-LanM, had an adsorption activity of 6.01 ± 0.11 μmol-terbium/g-sorbent and fast adsorption kinetics. The adsorbed REEs could be desorbed with >90% efficiency. The MNP-LanM selectively adsorbed REEs in the presence of a broad range of non-REEs. The protein storage stability of the MNP-LanM increased by two-fold compared to free LanM-SpyCatcher. The MNP-LanM could be efficiently separated using a magnet and reused with high stability as it retained ∼95% of the initial activity after eight adsorption-desorption cycles. Furthermore, the MNP-LanM selectively adsorbed and concentrated REEs from the leachate of coal fly ash and geothermal brine, resulting in 967-fold increase of REE purity. This study provides a scientific basis for developing innovative biosorptive materials for selective and efficient separation and recovery of REEs from low-grade feedstocks.

Tailoring abundant active-oxygen sites of Prussian blue analogues-derived adsorbents for highly efficient Yb(III) capture

The removal of rare earth elements in mineral processing wastewater is highly desirable but still challenging. In this study, three bimetallic Prussian blue analogues (PBA) and six corresponding oxides are prepared by co-precipitation and calcination methods, and then utilized to adsorb aqueous Yb(III) solution. The results of XRD, SEM, BET, and XPS indicate the successful synthesis of all the adsorbents. Among them, three PBA-oxide samples (PBO-800) exhibit the superior adsorption capacities (˃250 mg/g). The adsorption processes of Yb(III) are in accordance with the pseudo-second-order kinetic model and Langmuir model, simultaneously showing the spontaneous and endothermic thermodynamics. Moreover, PBO-800 can be reused after alkaline solution regeneration with less than 10% degradation after five consecutive adsorption-desorption cycles. More importantly, PBO-800 exhibits the impressive separation selectivity of Yb(III) and most light rare earth ions (e.g., 5.51 of Yb/La, 4.03 of Yb/Pr), as well as the selectivity of Yb(III) and alkali metal ions (e.g., 300.5 of Yb/Na, 256.2 of Yb/Ca). According to the characterization analysis and DFT calculation, the adsorption mechanism of Yb(III) by PBO-800 is mainly attributed to the strong interaction between the abundant active-oxygen sites and Yb(III), and the significant electrostatic attraction.

Biosorption of rare-earth and toxic metals from aqueous medium using different alternative biosorbents: evaluation of metallic affinity

Currently, the world faces difficulties related to the quantity and quality of water because of industrial expansion, population growth, and urbanization intensification. Biosorption is considered a promising technology that can be applied to remove toxic metals (TMs) and rare-earth metals (REMs) in wastewater at low concentrations, due to its efficiency and low cost. In this work, we investigated different non-conventional biosorbents to remove metallic ions (TMs and REMs) in biosorptive affinity tests. Metallic affinity assays among lanthanum and different biosorbents showed that greater affinities were found for sericin-alginate beads crosslinked with polyvinyl alcohol (SAPVA) (0.280 mmol/g) and polyethylene glycol diglycidyl ether (SAPEG) (0.277 mmol/g), expanded vermiculite (0.281 mmol/g), Sargassum filipendula seaweed (0.287 mmol/g), and seaweed biomass waste (0.289 mmol/g). Among the biosorbents evaluated, SAPVA and SAPEG beads, besides to sericin-alginate beads crosslinked with proanthocyanidins (SAPAs) were selected for affinity assays with other REMs and TMs. Compared to other particles, SAPVA beads showed higher potential for biosorption by REMs with the following order of affinity: Yb3+ > Dy3+ > Nd3+ > Ce3+ > La3+. Additionally, the biosorptive affinity of TMs by SAPVA beads followed the order: Al3+ > Cr3+ > Pb2+ > Cu2+ > Cd2+ > Zn2+ > Ni2+.

Phosphonomethyl iminodiacetic acid functionalized metal organic framework supported PAN composite beads for selective removal of La(III) from wastewater: Adsorptive performance and column separation studies

The rare earth elements being toxic in nature are being accumulated in water bodies as their industrial usage is growing exponentially, thus their efficient separation holds an immense significance. Herein, ligand functionalized metal organic framework (MOF), Phosphonomethyl iminodiacetic acid coordinated at Fe-BTC, was synthesized post-synthetically and incorporated subsequently in polyacrylonitrile polymer to prepare the composite beads via nonsolvent induced-phase-inversion technique for selective adsorption of La(III) from the wastewater in batch and dynamic column mode. XPS NMR, and FTIR were used to establish the interaction between functionalized ligand and unsaturated metal nodes of MOF. The adsorption capacity was 232.5 mg/g and 77.51 mg/g at 298 K of the functionalized MOF and composite beads respectively. Adsorption kinetics followed a pseudo-second order rate equation, and isotherm indicated the best fitting with Langmuir model. The dynamic behavior of the adsorption column packed with MOF/Polymer beads was fairly described by the Thomas model. The breakthrough time of 23.2 h could be attained with 12 cm of bed height and 10 ml/min of flow rate. These MOF/Polymer beads shown the selectivity of La over transitional metals were recycled over 5 times with about 15% loss of adsorption capacity. The findings provide suggestive insights of the potential use of functionalized MOF towards the separation of the rare earth element.

Highly compressible nanocellulose aerogels with a cellular structure for high-performance adsorption of Cu(II)

Cellulose-based aerogels have considerable potential for various application due to renewable, low cost, and high availability. However, mechanical robustness and functionalization remain major challenges. Here, we synthesized a compressible, recoverable cellulose nanofiber (CNF)/carboxymethyl cellulose (CMC)/branched polyethyleneimine (BPEI) aerogel via electrostatic-modulated interfacial covalent crosslinking and freeze-drying process. The porous BPEI@CNF/CMC aerogel possessed excellent mechanical compression and high-density metal-chelating groups, which exhibited fast adsorption kinetics and high adsorption capacity (452.49 mg g^-1) in static copper adsorption process. Furthermore, BPEI@CNF/CMC aerogels displayed excellent recyclability and could still reach 85% after 10 cycles. The integrated analyses of ATR-FTIR and XPS suggested that the predominant adsorption mechanism included electrostatic interaction, ion-exchange and chelation. This strategy provides a sustainable route to fabricate efficient biomass-based adsorbents for selective copper removal from water.

Rare earth elements from waste

Rare earth elements (REEs) are critical materials in electronics and clean technologies. With the diminishing of easily accessible minerals for mining, the REE recovery from waste is an alternative toward a circular economy. Present methods for REE recovery suffer from lengthy purifications, low extractability, and high wastewater streams. Here, we report an ultrafast electrothermal process (~3000°C, ~1 s) based on flash Joule heating (FJH) for activating wastes to improve REE extractability. FJH thermally degrades or reduces the hard-to-dissolve REE species to components with high thermodynamic solubility, leading to ~2× increase in leachability and high recovery yields using diluted acid (e.g., 0.1 M HCl). The activation strategy is feasible for various wastes including coal fly ash, bauxite residue, and electronic waste. The rapid FJH process is energy-efficient with a low electrical energy consumption of 600 kWh ton^-1. The potential for this route to be rapidly scaled is outlined.

Immersion grinding and in-situ polymerization synthesis of poly(ionic liquid)s incorporation into MOF composites as radioactive TcO4- scavenger

Imidazolium-based ionic liquids (ILs) are a promising candidate for efficient separation of radioactive pertechnetate (TcO₄^-) from nuclear waste. However, their effective fixation, availability of active sites and slow adsorption kinetics remain challenges. Here, we incorporated the bisimidazolium-based ILs into porous metal-organic frameworks (MOFs) via a combination of immersion grinding and in-situ polymerization. 3,3'-divinyl-1,1'(1,4-butanediyl) diimidazolium dichloride is tightly bound inside and outside the porous MOFs matrix by uniform immersion grinding, which facilitates the exposure of more adsorption sites and provides channels for the anions to travel through quickly. Solvent-free polymerization reduces environmental pollution and energy consumption. Notably, the composite P[C₄(VIM)₂]Cl₂@MIL-101 possesses an admirable removal efficiency (673 mg g^-1) compared with the pristine poly(ionic liquid)s (215 mg g^-1). Meanwhile, it exhibits fast sorption kinetics (92% in 2 min), good β and γ radiation-resistance, excellent regeneration and eminent removal efficiency in high alkaline conditions (83%). These superior traits endow that P[C₄(VIM)₂]Cl₂@MIL-101 effectively separated TcO₄^- from simulated Hanford Low-activity Waste (LAW) Melter off-gas scrubber solution tested in this work. DFT density functional theory confirms that the strong electrostatic attraction and minimum Gibbs free energy (-6.2 kcal mol^-1) achieve high selective adsorption for TcO₄^-. P[C₄(VIM)₂]Cl₂@MIL-101 demonstrates the considerable potential to remove TcO₄^- from radioactive contaminants.

Functionalized Activated Carbon Fibers by Hydrogen Peroxide and Polydopamine for Efficient Trace Lead Removal from Drinking Water

To achieve efficient and selective trace heavy metals removal from drinking water, a low-cost purification material polydopamine/activated carbon fibers (PDA/H-ACF) was successfully prepared by polymerizing dopamine on the surface of activated carbon fibers pretreated with hydrogen peroxide. The morphology, phase, surface functional groups, specific surface, and pore size distribution of the as-prepared sample were analyzed using FESEM, XPS, BET and pore size distribution test (PST), and FTIR, and orthogonal experiments were used to investigate the influences of concentration of H₂O₂, pretreatment time, and reflux temperature on trace lead removal. The results showed that the sample pretreated under optimized conditions could produce different pore structures, and the content of functional group -COOH obviously increased. After further modification by polydopamine, the contents of -NH-, -NH₂, and -OH functional groups on the surface obviously enhanced, which were beneficial to increase adsorption site and promote trace lead removal. The effluent lead concentration decreased from initial 150 to 3.18 ppb within 5 min, meeting the requirement of NSF International Standard/American National Standard for Drinking Water Treatment Units (NSF/ANSI 53-2020) (5 ppb). The isothermal adsorption process and adsorption kinetics could be well-fitted by the Langmuir isotherm and pseudo-second-order kinetics model, indicating that the adsorption process of trace lead by PDA/H-ACF belonged to monolayer and chemical adsorption. Moreover, the as-prepared PDA/H-ACF also showed superior trace lead adsorption performance in the presence of high concentration competitive metal ions, in a wide pH range and in tap water, and therefore had good application prospect in the field of drinking water purification.

Effective and selective adsorption of La3+ by a poly-N-isopropylacrylamide phosphoric modified cellulose aerogel

Synthesis diagram of CNC-P-PNIPAM aerogel material.

Ultralight and shapeable nanocellulose/metal-organic framework aerogel with hierarchical cellular architecture for highly efficient adsorption of Cu(II) ions

Water contamination by heavy metal pollutants is a global concern due to detrimental effects on the environment and human health. Regenerable, high-performance heavy metal sorbents are urgently demanded for improved water purification. Herein, we present an elegant strategy of interweaving metal-organic framework (MOF-808-ethylene diamine tetraacetic acid) and TEMPO-oxidized cellulose nanofibers (TCNF) to construct freeways in hybrid aerogels for rapid and efficient transport and capture of heavy metal ions. In this strategy, a postsynthetic ligand exchange approach is applied to introduce ordered and high-density accessible binding sites for metal ions. The prepared aerogels show excellent shapeability, ultralow density less than 0.005 g cm^-3, and high hierarchical porosity of 99.82%. Furthermore, benefiting from the abundant chelating groups and accessible surface areas, these aerogels exhibit outstanding uptake capacity of 300 mg g^-1 and rapid adsorption kinetics of 0.031 mg g^-1 h^-1 for Cu(II) ions, significantly better than conventional TCNF aerogels. The aerogels could be easily regenerated at least five cycles without greatly performance loss. These aerogels could effectively remove diverse heavy metal ions from complicated contaminated water. Thus, this work provides a novel method to synthesize environmental-friendly, regenerable, and high-performance adsorption materials for water remediation.

Persimmon tannin functionalized polyacrylonitrile fiber for highly efficient and selective recovery of Au(III) from aqueous solution

An efficient fibrous adsorbent (PANF-TETA-PT) was prepared via grafting triethylenetetramine (TETA) on polyacrylonitrile fiber (PANF), followed by persimmon tannin (PT) immobilizing. Detailed characterization certified that plenty amounts of amino and phenolic hydroxyl groups existed on the surface of PANF-TETA-PT, which would provide excellent active sites for Au(III) adsorption. The batch characteristic results found that the adsorption equilibrium data could be fitted well with Langmuir equation, while the obtained kinetic data were consistent with the Pseudo-second-order equation. The maximum equilibrium adsorption capacity of PANF-TETA-PT towards Au(III) (801.2 mg/g) was apparently superior than that of the reported adsorbents, and the competitive adsorption showed that PANF-TETA-PT had a good preference to adsorption Au(III) in spite of some coexisting pollutants. The characterization analysis of Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffractometer spectrum (XRD) revealed that the electrostatic attraction and chelation dominated the uptake of Au(III) on PANF-TETA-PT, in which a part of loaded Au(III) was reduced to Au particles with the help of reductive functional groups. Thus, this adsorbent could be as a promising candidate to separation and preconcentration of Au(III) from wastewater.

Study on the Effect and Mechanism of Impurity Aluminum on the Solvent Extraction of Rare Earth Elements (Nd, Pr, La) by P204-P350 in Chloride Solution

Solvent extraction is the most widely used method for separation and purification of rare earth elements, and organic extractants such as di(2-ethylhexyl) phosphoric acid (P204) and di(1-methyl-heptyl) methyl phosphonate (P350) are most commonly used for industrial applications. However, the presence of impurity ions in the feed liquid during extraction can easily emulsify the extractant and affect the quality of rare earth products. Aluminum ion is the most common impurity ion in the feed liquid, and it is an important cause of emulsification of the extractant. In this study, the influence of aluminum ion was investigated on the extraction of light rare earth elements by the P204-P350 system in hydrochloric acid medium. The results show that Al3+ competes with light rare earths in the extraction process, reducing the overall extraction rate. In addition, the Al3+ stripping rate is low and there is continuous accumulation of Al3+ in the organic phase during the stripping process, affecting the extraction efficiency and even causing emulsification. The slope method and infrared detection were utilized to explore the formation of an extraction compound of Al3+ and the extractant P204-P350 that entered the organic phase as AlCl[(HA)2]2P350(o).

PPI-Dendrimer-Functionalized Magnetic Metal-Organic Framework (Fe3O4@MOF@PPI) with High Adsorption Capacity for Sustainable Wastewater Treatment

Herein, a magnetic zirconium-based metal-organic framework nanocomposite was synthesized by a simple solvothermal method and used as an adsorbent for the removal of direct and acid dyes from aqueous solution. To enhance its adsorption performance, poly(propyleneimine) dendrimer was used to functionalize the as-synthesized magnetic porous nanocomposite. The dendrimer-functionalized magnetic nanocomposite was characterized by field-emission scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, nitrogen adsorption/desorption isotherms, and vibration sample magnetometer. The obtained results revealed the successful synthesis and functionalization of the magnetic nanocomposite. The adsorbents exhibited good magnetic properties with high saturation magnetization and high specific surface area. The adsorption isotherms and kinetics of anionic dyes were described by the Freundlich and pseudo-second-order models, respectively. It was found that the kinetics of adsorption of both the investigated dyes by the dendrimer-functionalized magnetic composite is considerably faster than the magnetic composite under the same condition. The adsorption capacity of the dendrimer-functionalized magnetic composite for investigated direct and acid dyes was 173.7 and 122.5 mg/g, respectively, which was higher than those of the existing magnetic adsorbents. This work provides new insights into the synthesis and application of hybrid magnetic adsorbents with synergistic properties of nanoporous metal-organic frameworks and dendrimer with a large number of functional groups for the removal of organic dyes.

Intertwined Nanosponge Solid-State Polymer Electrolyte for Rollable and Foldable Lithium-Ion Batteries

Herein, we report a straigthforward procedure to prepare an excellent intertwined nanosponge solid-state polymer electrolyte (INSPE) for highly bendable, rollable, and foldable lithium-ion batteries (LIBs). The mechanically reliable and electrochemically superior INSPE is conjugated with intertwined nanosponge (IN) poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-co-HFP) and ion-conducting polymer electrolyte (PE) containing poly(ethylene glycol) diacrylate (PEGDA), succinonitrile (SCN) plasticizer, and lithium bis(trifluoromethanesilfonyl)imide (LiTFSI). The conjugated INSPE has both high strength with great flexibility (tensile strength of 2.1 MPa, elongation of 36.7%), and excellent ionic conductivity (1.04 × 10^-3 S·cm^-1, similar to the values of liquid electrolytes). As a result of such special combination, the as-prepared INSPE retains almost 100% of its ionic conductivity when subjected to many types of severe mechanical deformations. Therefore, the INSPE is successfully applied to bendable, rollable, and foldable LIBs that show excellent energy storage performance despite the intense mechanical deformations.

Synthesis of N-(3-aminopropyl)imidazole-based poly(ionic liquid) as an adsorbent for the selective recovery of Au(iii) ions from aqueous solutions

A novel poly(ionic liquid) adsorbent (PIL-APIBCl) exhibits a high adsorption capacity of 236.68 mg g⁻¹ for Au(iii).

Polyacrylic acid-functionalized graphene oxide for high-performance adsorption of gallium from aqueous solution

Graphene oxide (GO) has great potential in metal recovery and water purification owing to their high surface area, abundant hydroxyl (OH) and carboxyl (COOH) groups. To fully understand the influence of the dispersity of GO on the adsorption capacity of metal ions, a series of polyacrylic acid (PAA) functionalized GO (PAA/GO) composites with different dispersity were prepared. The charge density of the PAA/GO composites were much higher than that of the untreated GO in acidic conditions, demonstrating a significant improvement of dispersibility by introducing PAA on the surfaces. Moreover, recovery of gallium by employing the PAA/GO composites as adsorbent were studied. The maximum adsorption capacity towards gallium ions of the adsorbent can reach 196.84 mg·g^-1, much higher than that of other commercially available resins (CL-P204, P507). This superiority could be attributed to the abundant COOH groups on the surfaces and the good dispersity of the PAA/GO composites. These results revealed that the PAA/GO composites could be promising adsorbents for selective adsorption and efficient recovery of Ga(III).