1
|
Yang X, Chen W, Fan Q, Chen J, Chen Y, Lai F, Liu H. Electronic Skin for Health Monitoring Systems: Properties, Functions, and Applications. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2024; 36:e2402542. [PMID: 38754914 DOI: 10.1002/adma.202402542] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/19/2024] [Revised: 04/22/2024] [Indexed: 05/18/2024]
Abstract
Electronic skin (e-skin), a skin-like wearable electronic device, holds great promise in the fields of telemedicine and personalized healthcare because of its good flexibility, biocompatibility, skin conformability, and sensing performance. E-skin can monitor various health indicators of the human body in real time and over the long term, including physical indicators (exercise, respiration, blood pressure, etc.) and chemical indicators (saliva, sweat, urine, etc.). In recent years, the development of various materials, analysis, and manufacturing technologies has promoted significant development of e-skin, laying the foundation for the application of next-generation wearable medical technologies and devices. Herein, the properties required for e-skin health monitoring devices to achieve long-term and precise monitoring and summarize several detectable indicators in the health monitoring field are discussed. Subsequently, the applications of integrated e-skin health monitoring systems are reviewed. Finally, current challenges and future development directions in this field are discussed. This review is expected to generate great interest and inspiration for the development and improvement of e-skin and health monitoring systems.
Collapse
Affiliation(s)
- Xichen Yang
- State Key Lab of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 00240, P. R. China
| | - Wenzheng Chen
- State Key Lab of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 00240, P. R. China
| | - Qunfu Fan
- State Key Lab of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 00240, P. R. China
| | - Jing Chen
- State Key Lab of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 00240, P. R. China
| | - Yujie Chen
- State Key Lab of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 00240, P. R. China
| | - Feili Lai
- State Key Lab of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 00240, P. R. China
| | - Hezhou Liu
- State Key Lab of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 00240, P. R. China
- Collaborative Innovation Center for Advanced Ship and Dee-Sea Exploration, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai, 200240, P. R. China
| |
Collapse
|
2
|
Mo Y, Huang X, Yue M, Hu L, Hu C. Preparation of nanocellulose and application of nanocellulose polyurethane composites. RSC Adv 2024; 14:18247-18257. [PMID: 38854830 PMCID: PMC11157500 DOI: 10.1039/d4ra01412j] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/23/2024] [Accepted: 05/21/2024] [Indexed: 06/11/2024] Open
Abstract
Polyurethane is a widely used material because of its excellent properties. Cellulose is a renewable, biocompatible, and biodegradable natural polymer that also has the advantages of a low density, high porosity, and large specific surface area. There are three main types of common nanocellulose: nanocellulose fibers, cellulose nanocrystals, and bacterial nanocellulose. Composites prepared with nanocellulose and polyurethane materials have good mechanical properties and good biocompatibility and can be applied in sensors, 3D printing, self-repairing materials, electromagnetic shielding, and many other areas. This paper details the preparation processes of different nanocelluloses and the application areas of composites, and points to the future development of nanocellulose polyurethane composites.
Collapse
Affiliation(s)
- Ya Mo
- School of Materials and Chemical Engineering, Hubei University of Technology Wuhan 430068 China
| | - Xiaoyue Huang
- School of Materials and Chemical Engineering, Hubei University of Technology Wuhan 430068 China
| | - Meng Yue
- School of Materials and Chemical Engineering, Hubei University of Technology Wuhan 430068 China
| | - Lixin Hu
- School of Materials and Chemical Engineering, Hubei University of Technology Wuhan 430068 China
| | - Chuanqun Hu
- School of Materials and Chemical Engineering, Hubei University of Technology Wuhan 430068 China
| |
Collapse
|
3
|
Del Bosque A, Sánchez-Romate XF, Sánchez M, Ureña A. Toward flexible piezoresistive strain sensors based on polymer nanocomposites: a review on fundamentals, performance, and applications. NANOTECHNOLOGY 2024; 35:292003. [PMID: 38621367 DOI: 10.1088/1361-6528/ad3e87] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/19/2023] [Accepted: 04/15/2024] [Indexed: 04/17/2024]
Abstract
The fundamentals, performance, and applications of piezoresistive strain sensors based on polymer nanocomposites are summarized herein. The addition of conductive nanoparticles to a flexible polymer matrix has emerged as a possible alternative to conventional strain gauges, which have limitations in detecting small strain levels and adapting to different surfaces. The evaluation of the properties or performance parameters of strain sensors such as the elongation at break, sensitivity, linearity, hysteresis, transient response, stability, and durability are explained in this review. Moreover, these nanocomposites can be exposed to different environmental conditions throughout their lifetime, including different temperature, humidity or acidity/alkalinity levels, that can affect performance parameters. The development of flexible piezoresistive sensors based on nanocomposites has emerged in recent years for applications related to the biomedical field, smart robotics, and structural health monitoring. However, there are still challenges to overcome in designing high-performance flexible sensors for practical implementation. Overall, this paper provides a comprehensive overview of the current state of research on flexible piezoresistive strain sensors based on polymer nanocomposites, which can be a viable option to address some of the major technological challenges that the future holds.
Collapse
Affiliation(s)
- Antonio Del Bosque
- Technology, Instruction and Design in Engineering and Education Research Group (TiDEE.rg), Catholic University of Ávila, C/Canteros s/n, E-05005 Ávila, Spain
| | - Xoan F Sánchez-Romate
- Materials Science and Engineering Area, Higher School of Experimental Sciences and Technology, Rey Juan Carlos University, C/Tulipán s/n, Móstoles, E-28933 Madrid, Spain
| | - María Sánchez
- Materials Science and Engineering Area, Higher School of Experimental Sciences and Technology, Rey Juan Carlos University, C/Tulipán s/n, Móstoles, E-28933 Madrid, Spain
- Instituto de Tecnologías Para la Sostenibilidad, Rey Juan Carlos University, C/Tulipán s/n, E-28933 Móstoles, Madrid, Spain
| | - Alejandro Ureña
- Materials Science and Engineering Area, Higher School of Experimental Sciences and Technology, Rey Juan Carlos University, C/Tulipán s/n, Móstoles, E-28933 Madrid, Spain
- Instituto de Tecnologías Para la Sostenibilidad, Rey Juan Carlos University, C/Tulipán s/n, E-28933 Móstoles, Madrid, Spain
| |
Collapse
|
4
|
Ye Y, Hong Y, Liang Q, Wang Y, Wang P, Luo J, Yin A, Ren Z, Liu H, Qi X, He S, Yu S, Wei J. Bioinspired electrically stable, optically tunable thermal management electronic skin via interfacial self-assembly. J Colloid Interface Sci 2024; 660:608-616. [PMID: 38266342 DOI: 10.1016/j.jcis.2024.01.041] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/27/2023] [Revised: 12/27/2023] [Accepted: 01/06/2024] [Indexed: 01/26/2024]
Abstract
The skin is the largest organ in the human body and serves vital functions such as sensation, thermal management, and protection. While electronic skin (E-skin) has made significant progress in sensory functions, achieving adaptive thermal management akin to human skin has remained a challenge. Drawing inspiration from squid skin, we have developed a hybrid electronic-photonic skin (hEP-skin) using an elastomer semi-embedded with aligned silver nanowires through interfacial self-assembly. With mechanically adjustable optical properties, the hEP-skin demonstrates adaptive thermal management abilities, warming in the range of +3.5°C for heat preservation and cooling in the range of -4.2°C for passive cooling. Furthermore, it exhibits an ultra-stable high electrical conductivity of ∼4.5×104 S/cm, even under stretching, bending or torsional deformations over 10,000 cycles. As a proof of demonstration, the hEP-skin successfully integrates stretchable light-emitting electronic skin with adaptive thermal management photonic skin.
Collapse
Affiliation(s)
- Yang Ye
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Yang Hong
- School of Science, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Qimin Liang
- School of Science, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Yuxin Wang
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Peike Wang
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Jingjing Luo
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Ao Yin
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Zhongqi Ren
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Haipeng Liu
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Xue Qi
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China
| | - Sisi He
- School of Science, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China.
| | - Suzhu Yu
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China.
| | - Jun Wei
- Shenzhen Key Laboratory of Flexible Printed Electronics Technology, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China.
| |
Collapse
|
5
|
Meraj A, Jawaid M, Singh SP, Nasef MM, Ariffin H, Fouad H, Abu-Jdayil B. Isolation and characterisation of lignin using natural deep eutectic solvents pretreated kenaf fibre biomass. Sci Rep 2024; 14:8672. [PMID: 38622317 PMCID: PMC11018866 DOI: 10.1038/s41598-024-59200-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/12/2024] [Accepted: 04/08/2024] [Indexed: 04/17/2024] Open
Abstract
Extraction of lignin via green methods is a crucial step in promoting the bioconversion of lignocellulosic biomasses. In the present study, utilisation of natural deep eutectic solvent for the pretreatment of kenaf fibres biomass is performed. Furthermore, extracted lignin from natural deep eutectic solvent pretreated kenaf biomass was carried out and its comparative study with commercial lignin was studied. The extracted lignin was characterized and investigated through Infrared Fourier transform spectroscopy, X-ray Diffraction, thermogravimetric analysis, UV-Vis spectroscopy, and scanning electron microscopy. FTIR Spectra shows that all samples have almost same set of absorption bands with slight difference in frequencies. CHNS analysis of natural deep eutectic solvent pretreated kenaf fibre showed a slight increase in carbon % from 42.36 to 43.17% and an increase in nitrogen % from - 0.0939 to - 0.1377%. Morphological analysis of commercial lignin shows irregular/uneven surfaces whereas natural deep eutectic solvent extracted lignin shows smooth and wavy surface. EDX analysis indicated noticeable peaks for oxygen and carbon elements which are present in lignocellulosic biomass. Thermal properties showed that lignin is constant at higher temperatures due to more branching and production of extremely condensed aromatic structures. In UV-VIS spectroscopy, commercial lignin shows slightly broad peak between 300 and 400 nm due to presence of carbonyl bond whereas, natural deep eutectic solvent extracted lignin does not show up any peak in this range. XRD results showed that the crystallinity index percentage for kenaf and natural deep eutectic solvent treated kenaf was 70.33 and 69.5% respectively. Therefore, these innovative solvents will undoubtedly have significant impact on the development of clean, green, and sustainable products for biocatalysts, extraction, electrochemistry, adsorption applications.
Collapse
Affiliation(s)
- Aatikah Meraj
- Laboratory of Bio-Polymer and its Derivatives, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, 43400, UPM Serdang, Selangor, Malaysia
| | - M Jawaid
- Chemical and Petroleum Engineering Department, College of Engineering, United Arab Emirates University (UAEU), P.O. Box. 15551, Al Ain, United Arab Emirates.
| | | | - Mohamed Mahmoud Nasef
- Department of Chemical and Environmental Engineering, Malaysia-Japan International Institute of Technology, Universiti Teknologi Malaysia, Jalan Sultan Yahya Petra, 54100, Kuala Lumpur, Malaysia
- Center of Hydrogen Energy, Institute of Future Energy, Universiti Teknologi, Jalan Sultan Yahya Petra, 54100, Kuala Lumpur, Malaysia
| | - Hidayah Ariffin
- Laboratory of Bio-Polymer and its Derivatives, Institute of Tropical Forestry and Forest Products (INTROP), Universiti Putra Malaysia, 43400, UPM Serdang, Selangor, Malaysia
- Department of Bioprocess Technology, Faculty of Biotechnology and Biomolecular Sciences, Universiti Putra Malaysia, 43400, UPM Serdang, Selangor, Malaysia
| | - Hassan Fouad
- Applied Medical Science Department, Community College, King Saud University, P.O Box 10219, Riyadh, 11433, Saudi Arabia
| | - Basim Abu-Jdayil
- Chemical and Petroleum Engineering Department, College of Engineering, United Arab Emirates University (UAEU), P.O. Box. 15551, Al Ain, United Arab Emirates
| |
Collapse
|
6
|
Weldemhret TG, Park YT, Song JI. Recent progress in surface engineering methods and advanced applications of flexible polymeric foams. Adv Colloid Interface Sci 2024; 326:103132. [PMID: 38537566 DOI: 10.1016/j.cis.2024.103132] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/15/2023] [Revised: 01/15/2024] [Accepted: 03/10/2024] [Indexed: 04/13/2024]
Abstract
Polymeric foams, also known as three-dimensional (3D) polymeric sponges, are lightweight, flexible, compressible, and possess a high surface area compared with other bulk polymers. These sponges have traditionally been used for mattresses or seat cushions in homes, offices, aircraft, automobiles, and trains, and to insulate against heat, electricity, and noise. Recently, the demand for modern materials has expanded the application of polymeric foams to various high-value technologies, including in areas that need high flame retardancy, flame sensors, oil/water separation, metal adsorption, solar steam generation, piezoresistivity, electromagnetic interference shielding, thermal energy storage, catalysis, supercapacitors, batteries, and triboelectric energy harvesting. Proper modification of foams is a prerequisite for their use in high-value applications. Several new strategies for the surface coating of 3D porous foams and novel emerging applications have been recently developed. Therefore, in this review, current advances in the field of surface coating and the application of 3D polymeric foams are discussed. A brief background on 3D polymeric foams, including the unique properties and benefits of polymeric sponges and their routes of synthesis, is presented. Different coating strategies for polymeric sponges are discussed, and their advantages and drawbacks are highlighted. Different advanced applications of polymeric sponges, in conjunction with specific and detailed examples of the above-mentioned applications, are also described. Finally, challenges and potential applications related to the coating of polymeric foams are discussed. We envisage that this review will be useful to facilitate further research, promote continued efforts on the advanced applications mentioned above, and provide new stimuli for the design of novel polymeric sponges for future modern applications.
Collapse
Affiliation(s)
- Teklebrahan Gebrekrstos Weldemhret
- Department of Mechanical Engineering, Changwon National University, 20 Changwondaehak-ro, Uichang-gu, Changwon, Gyeongsangnam-do 51140, Republic of Korea; Division of Physics and Semiconductor Science, Dongguk University, Seoul 04620, Republic of Korea
| | - Yong Tae Park
- Department of Mechanical Engineering, Myongji University, 116 Myongji-ro, Cheoin-gu, Yongin, Gyeonggi-do 17058, Republic of Korea.
| | - Jung Il Song
- Department of Mechanical Engineering, Changwon National University, 20 Changwondaehak-ro, Uichang-gu, Changwon, Gyeongsangnam-do 51140, Republic of Korea.
| |
Collapse
|
7
|
Song Y, Xing L, Zou X, Zhang C, Huang Z, Liu W, Wang J. A chitosan-based conductive double network hydrogel doped by tannic acid-reduced graphene oxide with excellent stretchability and high sensitivity for wearable strain sensors. Int J Biol Macromol 2024; 258:128861. [PMID: 38114012 DOI: 10.1016/j.ijbiomac.2023.128861] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/02/2023] [Revised: 11/29/2023] [Accepted: 12/15/2023] [Indexed: 12/21/2023]
Abstract
Conductive hydrogels usually suffer from weak mechanical properties and are easily destroyed, resulting in limited applications in flexible electronics. Concurrently, adding conductive additives to the hydrogel solution increases the probability of agglomeration and uneven dispersion issues. In this study, the biocompatible natural polymer chitosan was used as the network substrate. The rigid network employed was the Cit3-ion crosslinked chitosan (CS) network, and the MBA chemically crosslinked polyacrylamide (PAM) network was used as the flexible network. Tannic acid-reduced graphene oxide (TA-rGO), which has excellent conductivity and dispersibility, is used as a conductive filler. Thus, a CS/TA-rGO/PAM double network conductive hydrogel with excellent performance, high toughness, high conductivity, and superior sensing sensitivity was prepared. The prepared CS/TA-rGO/PAM double network conductive hydrogels have strong tensile properties (strain and toughness as high as 2009 % and 1045 kJ/cm3), excellent sensing sensitivity (GF value was 4.01), a wider strain detection range, high cycling stability and durability, good biocompatibility, and antimicrobial properties. The hydrogel can be assembled into flexible wearable devices that can not only dynamically detect human movements, such as joint bending, facial expression changes, swallowing, and saying, but also recognize handwriting and enable human-computer interaction.
Collapse
Affiliation(s)
- Yaoting Song
- School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200030, People's Republic of China
| | - Lu Xing
- School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200030, People's Republic of China
| | - Xinquan Zou
- School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200030, People's Republic of China
| | - Chenyan Zhang
- School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200030, People's Republic of China
| | - Zhonghuang Huang
- School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200030, People's Republic of China
| | - Wenxiu Liu
- School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200030, People's Republic of China
| | - Jikui Wang
- School of Materials Science and Engineering, East China University of Science and Technology, Shanghai 200030, People's Republic of China.
| |
Collapse
|
8
|
Fan L, Liu Y, Yang X, Sun H. A Novel Resistive Sensor Network Utilizing an SAP-Enhanced Ionic Layer and CNT Doping for Multipoint Pressure Measurement. ACS OMEGA 2024; 9:1535-1545. [PMID: 38222553 PMCID: PMC10785618 DOI: 10.1021/acsomega.3c07945] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/11/2023] [Revised: 12/06/2023] [Accepted: 12/08/2023] [Indexed: 01/16/2024]
Abstract
Amidst the rapid advancements in flexible electronics, flexible pressure sensors have achieved widespread applications in fields such as wearable devices and motion monitoring. Nevertheless, it is still a challenge to design a sensor with high sensitivity, cost-effectiveness, and a simplified manufacturing process. This paper introduces a piezoresistive sensor built upon a composite conductive filler. The sensor incorporates a super absorbent polymer (SAP) to absorb a phosphoric acid solution and doped carbon nanotubes as the composite conductive filler. In contrast to conventional rigid conductive fillers, the elastic polymer SAP enhances the sensor's stability significantly by exhibiting superior compatibility with the polydimethylsiloxane matrix, all the while reducing its Young's modulus. This work aims to theoretically elucidate the underlying principles that enable the sensor to achieve high sensitivity. It focuses on the induction of charge carriers due to pressure, which leads to the formation of a conductive pathway and subsequent changes in resistance, thus facilitating precise pressure detection. The paper also discusses the effects of piezoresistive layers with varying thicknesses and conductive fillers on the sensor's output performance. The results highlight the sensor's high sensitivity (0.094 kPa-1), rapid response time (105 ms), and exceptional cyclic load/unload stability (>5000 cycles). Furthermore, this paper establishes a versatile sensing network by integrating a portable inductance, capacitance, and resistance instrument with a programmable logic controller module. Compared to individual sensors, this system enables multipoint measurements, offering high spatial resolution and real-time monitoring capabilities, significantly expanding its overall practicality.
Collapse
Affiliation(s)
- Leijin Fan
- School of Aerospace
Engineering, Xiamen University, Xiamen 361005, China
| | - Yuantao Liu
- School of Aerospace
Engineering, Xiamen University, Xiamen 361005, China
| | - Xiaofeng Yang
- Science and Technology
on Reliability Physics and Application of Electronic Component Laboratory, The Fifth Electronics Research Institute of the Ministry
of Industry and Information Technology, Guangzhou 511370, China
| | - Hu Sun
- School of Aerospace
Engineering, Xiamen University, Xiamen 361005, China
| |
Collapse
|
9
|
Li S, Li H, Lu Y, Zhou M, Jiang S, Du X, Guo C. Advanced Textile-Based Wearable Biosensors for Healthcare Monitoring. BIOSENSORS 2023; 13:909. [PMID: 37887102 PMCID: PMC10605256 DOI: 10.3390/bios13100909] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 08/28/2023] [Revised: 09/19/2023] [Accepted: 09/22/2023] [Indexed: 10/28/2023]
Abstract
With the innovation of wearable technology and the rapid development of biosensors, wearable biosensors based on flexible textile materials have become a hot topic. Such textile-based wearable biosensors promote the development of health monitoring, motion detection and medical management, and they have become an important support tool for human healthcare monitoring. Textile-based wearable biosensors not only non-invasively monitor various physiological indicators of the human body in real time, but they also provide accurate feedback of individual health information. This review examines the recent research progress of fabric-based wearable biosensors. Moreover, materials, detection principles and fabrication methods for textile-based wearable biosensors are introduced. In addition, the applications of biosensors in monitoring vital signs and detecting body fluids are also presented. Finally, we also discuss several challenges faced by textile-based wearable biosensors and the direction of future development.
Collapse
Affiliation(s)
- Sheng Li
- School of Microelectronics and Control Engineering, Changzhou University, Changzhou 213164, China; (S.L.); (H.L.); (Y.L.); (M.Z.); (S.J.)
- CCZU-ARK Institute of Carbon Materials, Nanjing 210012, China
| | - Huan Li
- School of Microelectronics and Control Engineering, Changzhou University, Changzhou 213164, China; (S.L.); (H.L.); (Y.L.); (M.Z.); (S.J.)
| | - Yongcai Lu
- School of Microelectronics and Control Engineering, Changzhou University, Changzhou 213164, China; (S.L.); (H.L.); (Y.L.); (M.Z.); (S.J.)
| | - Minhao Zhou
- School of Microelectronics and Control Engineering, Changzhou University, Changzhou 213164, China; (S.L.); (H.L.); (Y.L.); (M.Z.); (S.J.)
| | - Sai Jiang
- School of Microelectronics and Control Engineering, Changzhou University, Changzhou 213164, China; (S.L.); (H.L.); (Y.L.); (M.Z.); (S.J.)
| | - Xiaosong Du
- School of Microelectronics and Control Engineering, Changzhou University, Changzhou 213164, China; (S.L.); (H.L.); (Y.L.); (M.Z.); (S.J.)
| | - Chang Guo
- CCZU-ARK Institute of Carbon Materials, Nanjing 210012, China
- School of Mechanical Engineering and Rail Transit, Changzhou University, Changzhou 213164, China
| |
Collapse
|
10
|
Malik S, Singh J, Goyat R, Saharan Y, Chaudhry V, Umar A, Ibrahim AA, Akbar S, Ameen S, Baskoutas S. Nanomaterials-based biosensor and their applications: A review. Heliyon 2023; 9:e19929. [PMID: 37809900 PMCID: PMC10559358 DOI: 10.1016/j.heliyon.2023.e19929] [Citation(s) in RCA: 11] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/15/2023] [Revised: 09/05/2023] [Accepted: 09/06/2023] [Indexed: 10/10/2023] Open
Abstract
A sensor can be called ideal or perfect if it is enriched with certain characteristics viz., superior detections range, high sensitivity, selectivity, resolution, reproducibility, repeatability, and response time with good flow. Recently, biosensors made of nanoparticles (NPs) have gained very high popularity due to their excellent applications in nearly all the fields of science and technology. The use of NPs in the biosensor is usually done to fill the gap between the converter and the bioreceptor, which is at the nanoscale. Simultaneously the uses of NPs and electrochemical techniques have led to the emergence of biosensors with high sensitivity and decomposition power. This review summarizes the development of biosensors made of NPssuch as noble metal NPs and metal oxide NPs, nanowires (NWs), nanorods (NRs), carbon nanotubes (CNTs), quantum dots (QDs), and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.
Collapse
Affiliation(s)
- Sumit Malik
- Department of Chemistry, Maharishi Markandeshwar (Deemed to be University), Mullana, Ambala, 133203, Haryana, India
| | - Joginder Singh
- Department of Chemistry, Maharishi Markandeshwar (Deemed to be University), Mullana, Ambala, 133203, Haryana, India
| | - Rohit Goyat
- Department of Chemistry, Maharishi Markandeshwar (Deemed to be University), Mullana, Ambala, 133203, Haryana, India
| | - Yajvinder Saharan
- Department of Chemistry, Maharishi Markandeshwar (Deemed to be University), Mullana, Ambala, 133203, Haryana, India
| | - Vivek Chaudhry
- Department of Chemistry, Maharishi Markandeshwar (Deemed to be University), Mullana, Ambala, 133203, Haryana, India
| | - Ahmad Umar
- Department of Chemistry, Faculty of Science and Arts, and Promising Centre for Sensors and Electronic Devices (PCSED)Najran University, Najran, 11001, Kingdom of Saudi Arabia
- Department of Materials Science and Engineering, The Ohio State University, Columbus, OH, 43210, USA
- Department of Materials Science and Engineering, The Ohio State University, Columbus, OH, 43210, USA
| | - Ahmed A. Ibrahim
- Department of Chemistry, Faculty of Science and Arts, and Promising Centre for Sensors and Electronic Devices (PCSED)Najran University, Najran, 11001, Kingdom of Saudi Arabia
| | - Sheikh Akbar
- Department of Materials Science and Engineering, The Ohio State University, Columbus, OH, 43210, USA
| | - Sadia Ameen
- Advanced Materials and Devices Laboratory, Department of Bio-Convergence Science, Advanced Science Campus, Jeonbuk National University, 56212, Jeonju, Republic of Korea
| | - Sotirios Baskoutas
- Department of Materials Science, University of Patras, 26500, Patras, Greece
| |
Collapse
|
11
|
Hu G, Varamesh A, Zhong N, Kong F, Hu J. Super-strong and high-performance electrical film heater derived from silver nanowire/aligned bacterial cellulose film. BIORESOUR BIOPROCESS 2023; 10:54. [PMID: 38647935 PMCID: PMC10992140 DOI: 10.1186/s40643-023-00669-w] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/28/2023] [Accepted: 07/21/2023] [Indexed: 04/25/2024] Open
Abstract
High-performance electrical Joule heaters with high mechanical properties, low driving voltage, rapid response, and flexibility are highly desirable for portable thermal management. Herein, by using aligned bacterial cellulose (BC) and silver nanowire (AgNW), we fabricated a novel film heater based on Joule heating phenomena. The aligned BC film prepared by stretching BC hydrogel and hot-pressing drying technology showed outstanding mechanical properties and flexibility. The ultrahigh strength of up to 1018 MPa and the toughness of 20 MJ/m3 were obtained for the aligned BC film with 40% wet-stretching (BC-40). In addition, the aligned BC film could be folded into desirable shapes. The AgNW was spray-coated on the surface of aligned BC-40 film and then covered with polydimethylsiloxane to form a P@AgNW@BC heater. P@AgNW@BC heater showed excellent conductivity, which endowed the film heater with an outstanding Joule heating performance. P@AgNW@BC heater could reach ~ 98 ℃ at a very low driving voltage of 4 V with a rapid heating response (13 s) and long-term temperature stability. The P@AgNW@BC heater with such an outstanding heating performance can be used as a flexible heating device for different applications in daily life like deicing/defogging device, wearable thermotherapy, etc.Affiliations: Please check and confirm that the authors and their respective affiliations have been correctly identified and amend if necessary.yes, we confirmed the affiliations are correct. Article title: Kindly check and confirm the edit made in the article title.Thanks, the title is no problem.
Collapse
Affiliation(s)
- Guichun Hu
- Department of Chemical & Petroleum Engineering, Schulich School of Engineering, Calgary, AB, T2N 1N4, Canada
- State Key Laboratory of Biobased Material and Green Papermaking, Faculty of Light Industry, Shandong Academy of Sciences, Qilu University of Technology, Jinan, 250353, People's Republic of China
| | - Amir Varamesh
- Department of Chemical & Petroleum Engineering, Schulich School of Engineering, Calgary, AB, T2N 1N4, Canada
| | - Na Zhong
- Department of Chemical & Petroleum Engineering, Schulich School of Engineering, Calgary, AB, T2N 1N4, Canada
| | - Fangong Kong
- State Key Laboratory of Biobased Material and Green Papermaking, Faculty of Light Industry, Shandong Academy of Sciences, Qilu University of Technology, Jinan, 250353, People's Republic of China
| | - Jinguang Hu
- Department of Chemical & Petroleum Engineering, Schulich School of Engineering, Calgary, AB, T2N 1N4, Canada.
| |
Collapse
|
12
|
Cao C, Boutilier MSH, Kim S, Taheri-Mousavi SM, Nayakanti N, Roberts R, Owens C, Hart AJ. Low-Profile, Large-Range Compressive Strain Sensing Using Micromanufactured CNT Micropillar Arrays. ACS APPLIED MATERIALS & INTERFACES 2023; 15:38665-38673. [PMID: 37549356 DOI: 10.1021/acsami.3c06299] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 08/09/2023]
Abstract
Tactile sensors, or sensors that collect measurements through touch, have versatile applications in a wide range of fields including robotic gripping, intelligent manufacturing, and biomedical technology. Hoping to match the ability of human hands to sense physical changes in objects through touch, engineers have experimented with a variety of materials from soft polymers to hard ceramics, but so far, all have fallen short. A grand challenge for developers of "human-like" bionic tactile sensors is to be able to sense a wide range of strains while maintaining the low profile necessary for compact integration. Here, we developed a low-profile tactile sensor (∼300 μm in height) based on patterned, vertically aligned carbon nanotubes (PVACNT) that can repetitively sense compressive strains of up to 75%. Upon compression, reversible changes occur in the points of contact between CNTs, producing measurable changes in electrical admittance. By patterning VACNT pillars with different aspect ratios and pitch sizes, we engineered the range and resolution of strain sensing, suggesting that CNT-based tactile sensors can be integrated according to device specifications.
Collapse
Affiliation(s)
- Changhong Cao
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
- Department of Mechanical Engineering, McGill University, Montreal, Quebec H3A 0C3, Canada
| | - Michael S H Boutilier
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
- Department of Chemical and Biochemical Engineering, Western University, London, Ontario N6A 5B9, Canada
| | - Sanha Kim
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
- Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology, Daejeon 34141, South Korea
| | - S Mohadeseh Taheri-Mousavi
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
| | - Nigamaa Nayakanti
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
| | - Ricardo Roberts
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
- School of Engineering and Sciences, Tecnológico de Monterrey, 64849 Monterrey, NL, Mexico
| | - Crystal Owens
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
| | - A John Hart
- Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
| |
Collapse
|
13
|
García Díez A, Pereira N, Tubio CR, Vilas-Vilela JL, Costa CM, Lanceros-Mendez S. Magnetic Polymer Actuators with Self-Sensing Resistive Bending Response Based on Ternary Polymer Composites. ACS APPLIED ELECTRONIC MATERIALS 2023; 5:3426-3435. [PMID: 37396056 PMCID: PMC10308843 DOI: 10.1021/acsaelm.3c00432] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 04/01/2023] [Accepted: 05/17/2023] [Indexed: 07/04/2023]
Abstract
A multifunctional polymer-based composite has been designed based on poly(vinylidene fluoride) (PVDF) as polymer matrix and cobalt ferrite (CoFe2O4, CFO) and multiwalled carbon nanotubes (MWCNTs) as fillers, allowing to combine magnetic and electrical responses. The composites were prepared by solvent casting with a fixed 20 wt % concentration of CFO and varying the MWCNTs content between 0 and 3 wt %, allowing to tailor the electrical behavior. The morphology, polymer phase, and thermal and magnetic properties are nearly independent of the MWCNT filler content within the polymer matrix. On the other hand, the mechanical and electrical properties strongly depend on the MWCNT content and a maximum d.c. electrical conductivity value of 4 × 10-4 S·cm-1 has been obtained for the 20 wt %CFO-3 wt %MWCNT/PVDF sample, which is accompanied by an 11.1 emu·g-1 magnetization. The suitability of this composite for magnetic actuators with self-sensing strain characteristics is demonstrated with excellent response and reproducibility.
Collapse
Affiliation(s)
- Ander García Díez
- BCMaterials,
Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain
| | - Nelson Pereira
- Centre
of Physics Universities of Minho and Porto and Laboratory of Physics
for Materials and Emergent Technologies, LapMET, University of Minho, Campus de Gualtar, 4710-057 Braga, Portugal
| | - Carmen R. Tubio
- BCMaterials,
Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain
| | - Jose Luis Vilas-Vilela
- BCMaterials,
Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain
- Departamento
de Química Física, Facultad de Ciencia y Tecnología, Universidad del País Vasco (UPV/EHU), Apdo. 644, 48080 Bilbao, Spain
| | - Carlos M. Costa
- Centre
of Physics Universities of Minho and Porto and Laboratory of Physics
for Materials and Emergent Technologies, LapMET, University of Minho, Campus de Gualtar, 4710-057 Braga, Portugal
| | - Senentxu Lanceros-Mendez
- BCMaterials,
Basque Center for Materials, Applications and Nanostructures, UPV/EHU Science Park, 48940 Leioa, Spain
- Centre
of Physics Universities of Minho and Porto and Laboratory of Physics
for Materials and Emergent Technologies, LapMET, University of Minho, Campus de Gualtar, 4710-057 Braga, Portugal
- Ikerbasque,
Basque Foundation for Science, 48009 Bilbao, Spain
| |
Collapse
|
14
|
Xu S, Xu Z, Li D, Cui T, Li X, Yang Y, Liu H, Ren T. Recent Advances in Flexible Piezoresistive Arrays: Materials, Design, and Applications. Polymers (Basel) 2023; 15:2699. [PMID: 37376345 DOI: 10.3390/polym15122699] [Citation(s) in RCA: 1] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/18/2023] [Revised: 06/06/2023] [Accepted: 06/07/2023] [Indexed: 06/29/2023] Open
Abstract
Spatial distribution perception has become an important trend for flexible pressure sensors, which endows wearable health devices, bionic robots, and human-machine interactive interfaces (HMI) with more precise tactile perception capabilities. Flexible pressure sensor arrays can monitor and extract abundant health information to assist in medical detection and diagnosis. Bionic robots and HMI with higher tactile perception abilities will maximize the freedom of human hands. Flexible arrays based on piezoresistive mechanisms have been extensively researched due to the high performance of pressure-sensing properties and simple readout principles. This review summarizes multiple considerations in the design of flexible piezoresistive arrays and recent advances in their development. First, frequently used piezoresistive materials and microstructures are introduced in which various strategies to improve sensor performance are presented. Second, pressure sensor arrays with spatial distribution perception capability are discussed emphatically. Crosstalk is a particular concern for sensor arrays, where mechanical and electrical sources of crosstalk issues and the corresponding solutions are highlighted. Third, several processing methods are also introduced, classified as printing, field-assisted and laser-assisted fabrication. Next, the representative application works of flexible piezoresistive arrays are provided, including human-interactive systems, healthcare devices, and some other scenarios. Finally, outlooks on the development of piezoresistive arrays are given.
Collapse
Affiliation(s)
- Shuoyan Xu
- School of Integrated Circuit, Tsinghua University, Beijing 100084, China
- Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing 100084, China
| | - Zigan Xu
- School of Integrated Circuit, Tsinghua University, Beijing 100084, China
- Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing 100084, China
| | - Ding Li
- School of Integrated Circuit, Tsinghua University, Beijing 100084, China
- Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing 100084, China
| | - Tianrui Cui
- School of Integrated Circuit, Tsinghua University, Beijing 100084, China
- Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing 100084, China
| | - Xin Li
- School of Integrated Circuit, Tsinghua University, Beijing 100084, China
- Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing 100084, China
| | - Yi Yang
- School of Integrated Circuit, Tsinghua University, Beijing 100084, China
- Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing 100084, China
| | - Houfang Liu
- School of Integrated Circuit, Tsinghua University, Beijing 100084, China
- Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing 100084, China
| | - Tianling Ren
- School of Integrated Circuit, Tsinghua University, Beijing 100084, China
- Beijing National Research Center for Information Science and Technology (BNRist), Tsinghua University, Beijing 100084, China
- Center for Flexible Electronics Technology, Tsinghua University, Beijing 100084, China
| |
Collapse
|
15
|
Li J, Deng Y, Fu H, Zhang Y, Zhang Y, Fu L, Xu C, Lin B. Multifunctional Starch-Based Sensor with Non-Covalent Network to Achieve "3R" Circulation. SMALL (WEINHEIM AN DER BERGSTRASSE, GERMANY) 2023; 19:e2208116. [PMID: 36890772 DOI: 10.1002/smll.202208116] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/24/2022] [Revised: 02/15/2023] [Indexed: 06/08/2023]
Abstract
With the consumption of disposable electronic devices increasing, it is meaningful but also a big challenge to develop reusable and sustainable materials to replace traditional single-use sensors. Herein, a clever strategy for constructing a multifunctional sensor with 3R circulation (renewable, reusable, pollution-reducing biodegradable) is presented, in which silver nanoparticles (AgNPs) with multiple interactions are introduced into a reversible non-covalent cross-linking network composed of biocompatible and degradable carboxymethyl starch (CMS) and polyvinyl alcohol (PVA) to simultaneously obtain high mechanical conductivity and long-term antibacterial properties by a one-pot method. Surprisingly, the assembled sensor shows high sensitivity (gauge factor up to 4.02), high conductivity (0.1753 S m-1 ), low detection limit (0.5%), long-term antibacterial ability (more than 7 days), and stable sensing performance. Thus, the CMS/PVA/AgNPs sensor can not only accurately monitor a series of human behavior, but also identify handwriting recognition from different people. More importantly, the abandoned starch-based sensor can form a 3R circulation. Especially, the fully renewable film still shows excellent mechanical performance, achieving reusable without sacrificing its original function. Therefore, this work provides a new horizon for multifunctional starch-based materials as sustainable substrates for replacing traditional single-use sensors.
Collapse
Affiliation(s)
- Jianfang Li
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, 530004, P. R. China
| | - Yongfu Deng
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, 530004, P. R. China
| | - Hao Fu
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, 530004, P. R. China
| | - Yuwei Zhang
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, 530004, P. R. China
| | - Yuancheng Zhang
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, 530004, P. R. China
| | - Lihua Fu
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, 530004, P. R. China
| | - Chuanhui Xu
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, 530004, P. R. China
| | - Baofeng Lin
- School of Chemistry and Chemical Engineering, Guangxi University, Nanning, 530004, P. R. China
| |
Collapse
|
16
|
Zhu Y, Haghniaz R, Hartel MC, Mou L, Tian X, Garrido PR, Wu Z, Hao T, Guan S, Ahadian S, Kim HJ, Jucaud V, Dokmeci MR, Khademhosseini A. Recent Advances in Bioinspired Hydrogels: Materials, Devices, and Biosignal Computing. ACS Biomater Sci Eng 2023; 9:2048-2069. [PMID: 34784170 PMCID: PMC10823919 DOI: 10.1021/acsbiomaterials.1c00741] [Citation(s) in RCA: 19] [Impact Index Per Article: 19.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Abstract
The remarkable ability of biological systems to sense and adapt to complex environmental conditions has inspired new materials and novel designs for next-generation wearable devices. Hydrogels are being intensively investigated for their versatile functions in wearable devices due to their superior softness, biocompatibility, and rapid stimulus response. This review focuses on recent strategies for developing bioinspired hydrogel wearable devices that can accommodate mechanical strain and integrate seamlessly with biological systems. We will provide an overview of different types of bioinspired hydrogels tailored for wearable devices. Next, we will discuss the recent progress of bioinspired hydrogel wearable devices such as electronic skin and smart contact lenses. Also, we will comprehensively summarize biosignal readout methods for hydrogel wearable devices as well as advances in powering and wireless data transmission technologies. Finally, current challenges facing these wearable devices are discussed, and future directions are proposed.
Collapse
Affiliation(s)
- Yangzhi Zhu
- Terasaki Institute for Biomedical Innovation, Los Angeles, California 90064, United States
| | - Reihaneh Haghniaz
- Terasaki Institute for Biomedical Innovation, Los Angeles, California 90064, United States
| | - Martin C Hartel
- Terasaki Institute for Biomedical Innovation, Los Angeles, California 90064, United States
- Department of Bioengineering, University of California-Los Angeles, Los Angeles, California 90095, United States
| | - Lei Mou
- Terasaki Institute for Biomedical Innovation, Los Angeles, California 90064, United States
| | - Xinyu Tian
- Department of Nanoengineering, University of California, San Diego, La Jolla, California 92093, United States
| | - Pamela Rosario Garrido
- Terasaki Institute for Biomedical Innovation, Los Angeles, California 90064, United States
- Department of Electric and Electronic Engineering, Technological Institute of Merida, Merida, Yucatan 97118, Mexico
| | - Zhuohong Wu
- Department of Nanoengineering, University of California, San Diego, La Jolla, California 92093, United States
| | - Taige Hao
- Department of Nanoengineering, University of California, San Diego, La Jolla, California 92093, United States
| | - Shenghan Guan
- Terasaki Institute for Biomedical Innovation, Los Angeles, California 90064, United States
- Mork Family Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, California 90089, United States
| | - Samad Ahadian
- Terasaki Institute for Biomedical Innovation, Los Angeles, California 90064, United States
| | - Han-Jun Kim
- Terasaki Institute for Biomedical Innovation, Los Angeles, California 90064, United States
| | - Vadim Jucaud
- Terasaki Institute for Biomedical Innovation, Los Angeles, California 90064, United States
| | - Mehmet R Dokmeci
- Terasaki Institute for Biomedical Innovation, Los Angeles, California 90064, United States
| | - Ali Khademhosseini
- Terasaki Institute for Biomedical Innovation, Los Angeles, California 90064, United States
| |
Collapse
|
17
|
Zhu S, Kim D, Jeong C. Recent Development of Mechanical Stimuli Detectable Sensors, Their Future, and Challenges: A Review. SENSORS (BASEL, SWITZERLAND) 2023; 23:s23094300. [PMID: 37177505 PMCID: PMC10181258 DOI: 10.3390/s23094300] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/11/2022] [Revised: 12/30/2022] [Accepted: 04/21/2023] [Indexed: 05/15/2023]
Abstract
By virtue of their wide applications in transportation, healthcare, smart home, and security, development of sensors detecting mechanical stimuli, which are many force types (pressure, shear, bending, tensile, and flexure) is an attractive research direction for promoting the advancement of science and technology. Sensing capabilities of various force types based on structural design, which combine unique structure and materials, have emerged as a highly promising field due to their various industrial applications in wearable devices, artificial skin, and Internet of Things (IoT). In this review, we focus on various sensors detecting one or two mechanical stimuli and their structure, materials, and applications. In addition, for multiforce sensing, sensing mechanism are discussed regarding responses in external stimuli such as piezoresistive, piezoelectric, and capacitance phenomena. Lastly, the prospects and challenges of sensors for multiforce sensing are discussed and summarized, along with research that has emerged.
Collapse
Affiliation(s)
- Shushuai Zhu
- School of Mechanical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea
| | - Dana Kim
- School of Mechanical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea
| | - Changyoon Jeong
- School of Mechanical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea
| |
Collapse
|
18
|
Muñoz-Chilito J, Lara-Ramos JA, Marín L, Machuca-Martínez F, Correa-Aguirre JP, Hidalgo-Salazar MA, García-Navarro S, Roca-Blay L, Rodríguez LA, Mosquera-Vargas E, Diosa JE. Morphological Electrical and Hardness Characterization of Carbon Nanotube-Reinforced Thermoplastic Polyurethane (TPU) Nanocomposite Plates. Molecules 2023; 28:molecules28083598. [PMID: 37110832 PMCID: PMC10145542 DOI: 10.3390/molecules28083598] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/25/2022] [Revised: 03/07/2023] [Accepted: 03/24/2023] [Indexed: 04/29/2023] Open
Abstract
The impacts on the morphological, electrical and hardness properties of thermoplastic polyurethane (TPU) plates using multi-walled carbon nanotubes (MWCNTs) as reinforcing fillers have been investigated, using MWCNT loadings between 1 and 7 wt%. Plates of the TPU/MWCNT nanocomposites were fabricated by compression molding from extruded pellets. An X-ray diffraction analysis showed that the incorporation of MWCNTs into the TPU polymer matrix increases the ordered range of the soft and hard segments. SEM images revealed that the fabrication route used here helped to obtain TPU/MWCNT nanocomposites with a uniform dispersion of the nanotubes inside the TPU matrix and promoted the creation of a conductive network that favors the electronic conduction of the composite. The potential of the impedance spectroscopy technique has been used to determine that the TPU/MWCNT plates exhibited two conduction mechanisms, percolation and tunneling conduction of electrons, and their conductivity values increase as the MWCNT loading increases. Finally, although the fabrication route induced a hardness reduction with respect to the pure TPU, the addition of MWCNT increased the Shore A hardness behavior of the TPU plates.
Collapse
Affiliation(s)
- José Muñoz-Chilito
- Grupo de Transiciones de Fase y Materiales Funcionales, Departamento de Física, Universidad del Valle, Santiago de Cali 760032, Colombia
| | - José A Lara-Ramos
- Grupo de Transiciones de Fase y Materiales Funcionales, Departamento de Física, Universidad del Valle, Santiago de Cali 760032, Colombia
| | - Lorena Marín
- Centro de Excelencia en Nuevos Materiales (CENM), Universidad del Valle, Santiago de Cali 760032, Colombia
- Grupo de Películas Delgadas, Universidad del Valle, Santiago de Cali 760032, Colombia
| | - Fiderman Machuca-Martínez
- Centro de Excelencia en Nuevos Materiales (CENM), Universidad del Valle, Santiago de Cali 760032, Colombia
- Grupo de Investigación en Procesos Avanzados para Tratamientos Biológicos y Químicos, Escuela de Ingeniería Química, Universidad del Valle, Santiago de Cali 760032, Colombia
| | - Juan P Correa-Aguirre
- Grupo de Investigación en Tecnología para la Manufactura, Universidad Autónoma de Occidente, Santiago de Cali 760035, Colombia
| | - Miguel A Hidalgo-Salazar
- Grupo de Investigación en Tecnología para la Manufactura, Universidad Autónoma de Occidente, Santiago de Cali 760035, Colombia
| | | | - Luis Roca-Blay
- AIMPLAS, Gustave Eiffel 4 (València Parc Tecnològic), 46980 Paterna, Spain
| | - Luis A Rodríguez
- Grupo de Transiciones de Fase y Materiales Funcionales, Departamento de Física, Universidad del Valle, Santiago de Cali 760032, Colombia
- Centro de Excelencia en Nuevos Materiales (CENM), Universidad del Valle, Santiago de Cali 760032, Colombia
| | - Edgar Mosquera-Vargas
- Grupo de Transiciones de Fase y Materiales Funcionales, Departamento de Física, Universidad del Valle, Santiago de Cali 760032, Colombia
- Centro de Excelencia en Nuevos Materiales (CENM), Universidad del Valle, Santiago de Cali 760032, Colombia
| | - Jesús E Diosa
- Grupo de Transiciones de Fase y Materiales Funcionales, Departamento de Física, Universidad del Valle, Santiago de Cali 760032, Colombia
- Centro de Excelencia en Nuevos Materiales (CENM), Universidad del Valle, Santiago de Cali 760032, Colombia
| |
Collapse
|
19
|
Zhan W, Zhang Q, Zhang C, Yang Z, Peng N, Jiang Z, Liu M, Zhang X. Carboxymethylcellulose reinforced, double-network hydrogel-based strain sensor with superior sensing stability for long-term monitoring. Int J Biol Macromol 2023; 241:124536. [PMID: 37085065 DOI: 10.1016/j.ijbiomac.2023.124536] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/01/2023] [Revised: 04/15/2023] [Accepted: 04/17/2023] [Indexed: 04/23/2023]
Abstract
Hydrogel-based strain sensors have garnered significant attention for their potential for human health monitoring. However, its practical application has been hindered by water loss, freezing, and structural impairment during long-term motion monitoring. Here, a strain sensor based on double-network (DN) hydrogel of polyacrylamide (PAAm)/carboxymethylcellulose (CMC) was developed in a ternary solvent system of lithium chloride (LiCl)/ethylene glycol (EG)/H2O through a facile one-pot radical polymerization strategy. The incorporation of EG effectively mitigated the hydration of lithium salts by generating stable ion clusters with Li+ and stronger hydrogen bonds within the polymer matrix. The sensor demonstrated excellent mechanical properties, including a stretchability of 1858 %, toughness of 1.80 MJ/m3, and recoverability of 102 %. Furthermore, the LiCl/EG/H2O ternary system resulted in high conductivity, excellent anti-freezing performance, and superior sensing stability. In addition, the sensor exhibited remarkable sensitivity, enabling the monitoring of human movements ranging from subtle to significant deformations, including throat motion and bending of the elbow, wrist, finger, and lower limb. This study presents a viable approach for constructing hydrogel-based strain sensors with exceptional sensing stability for long-term tracking of human motions.
Collapse
Affiliation(s)
- Wang Zhan
- The Key Laboratory of Biomedical Information Engineering of the Ministry of Education, Center for Mitochondrial Biology and Medicine, School of Life Science and Technology, State Key Laboratory for Manufacturing Systems Engineering, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technology, Key Laboratory for Biomedical Testing and High-end Equipment, Xi'an Jiaotong University, Xi'an 710049, Shannxi, PR China
| | - Qi Zhang
- The Key Laboratory of Biomedical Information Engineering of the Ministry of Education, Center for Mitochondrial Biology and Medicine, School of Life Science and Technology, State Key Laboratory for Manufacturing Systems Engineering, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technology, Key Laboratory for Biomedical Testing and High-end Equipment, Xi'an Jiaotong University, Xi'an 710049, Shannxi, PR China
| | - Cuiling Zhang
- The Key Laboratory of Biomedical Information Engineering of the Ministry of Education, Center for Mitochondrial Biology and Medicine, School of Life Science and Technology, State Key Laboratory for Manufacturing Systems Engineering, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technology, Key Laboratory for Biomedical Testing and High-end Equipment, Xi'an Jiaotong University, Xi'an 710049, Shannxi, PR China
| | - Zihao Yang
- The Key Laboratory of Biomedical Information Engineering of the Ministry of Education, Center for Mitochondrial Biology and Medicine, School of Life Science and Technology, State Key Laboratory for Manufacturing Systems Engineering, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technology, Key Laboratory for Biomedical Testing and High-end Equipment, Xi'an Jiaotong University, Xi'an 710049, Shannxi, PR China
| | - Niancai Peng
- State Key Laboratory for Manufacturing Systems Engineering, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technology, Key Laboratory for Biomedical Testing and High-end Equipment, Xi'an Jiaotong University, Xi'an 7100049, Shaanxi, PR China
| | - Zhuangde Jiang
- State Key Laboratory for Manufacturing Systems Engineering, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technology, Key Laboratory for Biomedical Testing and High-end Equipment, Xi'an Jiaotong University, Xi'an 7100049, Shaanxi, PR China
| | - Ming Liu
- Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education & State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 7100049, Shaanxi, PR China.
| | - Xiaohui Zhang
- The Key Laboratory of Biomedical Information Engineering of the Ministry of Education, Center for Mitochondrial Biology and Medicine, School of Life Science and Technology, State Key Laboratory for Manufacturing Systems Engineering, International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technology, Key Laboratory for Biomedical Testing and High-end Equipment, Xi'an Jiaotong University, Xi'an 710049, Shannxi, PR China.
| |
Collapse
|
20
|
Li J, Yang F, Liu D, Han S, Li J, Sui G. Graphene composite paper synergized with micro/nanocellulose-fiber and silk fibroin for flexible strain sensor. Int J Biol Macromol 2023; 240:124439. [PMID: 37062378 DOI: 10.1016/j.ijbiomac.2023.124439] [Citation(s) in RCA: 2] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/29/2022] [Revised: 03/22/2023] [Accepted: 04/10/2023] [Indexed: 04/18/2023]
Abstract
The fabrication of uniform and strong graphene-based conductive paper is challenging due to easy aggregation and poor film formability of graphene. Herein, on the basis of good dispersing effect of nanocellulose, high content graphene (50 wt%) composite paper with micro/nanocellulose fibers and silk fibroin (SF) was manufactured via simple casting method. The synergistic effects of cellulose microfibers (CMFs), cellulose nanofibers (CNFs) and SF result in the paper with ideal combination of flexibility, electrical conductivity and mechanical strength, where CNFs, CMFs and SF act as dispersing and film forming for GNPs, dimensional stability, and interfacial binding agents, respectively. Extraordinarily, by adding SF, graphene nanosheets are tightly coated on the surface of CMFs. The composite paper shows a tensile strength of 49.29 MPa, surface resistance of 39.0-42.1 Ω and good joints bend sensing performance. Additionally, it is found that CMFs can hinder the micro-cracks from propagating during the cyclic elbow bending test. The graphene-based conductive paper is helpful for the development of smart clothing wearable biosensing devices.
Collapse
Affiliation(s)
- Jun Li
- Shi-changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China
| | - Fei Yang
- Shi-changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China
| | - Dongyan Liu
- Shi-changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China.
| | - Sensen Han
- Shi-changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China
| | - Junsheng Li
- Engineering Center of National New Raw Material Base Construction of Liaoning Province, Shenyang 110031, China
| | - Guoxin Sui
- Shi-changxu Innovation Center for Advanced Materials, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China.
| |
Collapse
|
21
|
Qian K, Zhou J, Miao M, Wu H, Thaiboonrod S, Fang J, Feng X. Highly Ordered Thermoplastic Polyurethane/Aramid Nanofiber Conductive Foams Modulated by Kevlar Polyanion for Piezoresistive Sensing and Electromagnetic Interference Shielding. NANO-MICRO LETTERS 2023; 15:88. [PMID: 37029266 PMCID: PMC10082146 DOI: 10.1007/s40820-023-01062-0] [Citation(s) in RCA: 11] [Impact Index Per Article: 11.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 01/19/2023] [Accepted: 02/28/2023] [Indexed: 06/19/2023]
Abstract
Highly ordered and uniformly porous structure of conductive foams is a vital issue for various functional purposes such as piezoresistive sensing and electromagnetic interference (EMI) shielding. With the aids of Kevlar polyanionic chains, thermoplastic polyurethane (TPU) foams reinforced by aramid nanofibers (ANF) with adjustable pore-size distribution were successfully obtained via a non-solvent-induced phase separation. In this regard, the most outstanding result is the in situ formation of ANF in TPU foams after protonation of Kevlar polyanion during the NIPS process. Furthermore, in situ growth of copper nanoparticles (Cu NPs) on TPU/ANF foams was performed according to the electroless deposition by using the tiny amount of pre-blended Ti3C2Tx MXene as reducing agents. Particularly, the existence of Cu NPs layers significantly promoted the storage modulus in 2,932% increments, and the well-designed TPU/ANF/Ti3C2Tx MXene (PAM-Cu) composite foams showed distinguished compressive cycle stability. Taking virtues of the highly ordered and elastic porous architectures, the PAM-Cu foams were utilized as piezoresistive sensor exhibiting board compressive interval of 0-344.5 kPa (50% strain) with good sensitivity at 0.46 kPa-1. Meanwhile, the PAM-Cu foams displayed remarkable EMI shielding effectiveness at 79.09 dB in X band. This work provides an ideal strategy to fabricate highly ordered TPU foams with outstanding elastic recovery and excellent EMI shielding performance, which can be used as a promising candidate in integration of satisfactory piezoresistive sensor and EMI shielding applications for human-machine interfaces.
Collapse
Affiliation(s)
- Kunpeng Qian
- School of Materials Sciences and Engineering, Shanghai University, Shanghai, 200444, People's Republic of China
- Research Center of Nano Science and Technology, Shanghai University, Shanghai, 200444, People's Republic of China
| | - Jianyu Zhou
- Research Center of Nano Science and Technology, Shanghai University, Shanghai, 200444, People's Republic of China
| | - Miao Miao
- Research Center of Nano Science and Technology, Shanghai University, Shanghai, 200444, People's Republic of China
| | - Hongmin Wu
- Research Center of Nano Science and Technology, Shanghai University, Shanghai, 200444, People's Republic of China
| | - Sineenat Thaiboonrod
- National Nanotechnology Center (NANOTEC), National Science and Technology Development Agency (NSTDA), Thailand Science Park, Pathum Thani, 12120, Thailand
| | - Jianhui Fang
- Research Center of Nano Science and Technology, Shanghai University, Shanghai, 200444, People's Republic of China
| | - Xin Feng
- School of Materials Sciences and Engineering, Shanghai University, Shanghai, 200444, People's Republic of China.
- Research Center of Nano Science and Technology, Shanghai University, Shanghai, 200444, People's Republic of China.
| |
Collapse
|
22
|
Yu T, Tao Y, Wu Y, Zhang D, Yang J, Ge G. Heterogeneous Multi-Material Flexible Piezoresistive Sensor with High Sensitivity and Wide Measurement Range. MICROMACHINES 2023; 14:716. [PMID: 37420949 DOI: 10.3390/mi14040716] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/01/2023] [Revised: 03/17/2023] [Accepted: 03/21/2023] [Indexed: 07/09/2023]
Abstract
Flexible piezoresistive sensors (FPSs) have the advantages of compact structure, convenient signal acquisition and fast dynamic response; they are widely used in motion detection, wearable electronic devices and electronic skins. FPSs accomplish the measurement of stresses through piezoresistive material (PM). However, FPSs based on a single PM cannot achieve high sensitivity and wide measurement range simultaneously. To solve this problem, a heterogeneous multi-material flexible piezoresistive sensor (HMFPS) with high sensitivity and a wide measurement range is proposed. The HMFPS consists of a graphene foam (GF), a PDMS layer and an interdigital electrode. Among them, the GF serves as a sensing layer, providing high sensitivity, and the PDMS serves as a supporting layer, providing a large measurement range. The influence and principle of the heterogeneous multi-material (HM) on the piezoresistivity were investigated by comparing the three HMFPS with different sizes. The HM proved to be an effective way to produce flexible sensors with high sensitivity and a wide measurement range. The HMFPS-10 has a sensitivity of 0.695 kPa-1, a measurement range of 0-14,122 kPa, fast response/recovery (83 ms and 166 ms) and excellent stability (2000 cycles). In addition, the potential application of the HMFPS-10 in human motion monitoring was demonstrated.
Collapse
Affiliation(s)
- Tingting Yu
- School of Aerospace Science and Technology, Xidian University, Xi'an 710071, China
| | - Yebo Tao
- Intelligent Manufacturing College, Jiaxing Vocational & Technical College, Jiaxing 314036, China
| | - Yali Wu
- College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China
| | - Dongguang Zhang
- College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, Taiyuan 030024, China
| | - Jiayi Yang
- College of Computer Science and Technology, Xi'an University of Science and Technology, Xi'an 710054, China
| | - Gang Ge
- Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117583, Singapore
| |
Collapse
|
23
|
Lai QT, Sun QJ, Tang Z, Tang XG, Zhao XH. Conjugated Polymer-Based Nanocomposites for Pressure Sensors. Molecules 2023; 28:1627. [PMID: 36838615 PMCID: PMC9964060 DOI: 10.3390/molecules28041627] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/01/2023] [Revised: 02/01/2023] [Accepted: 02/02/2023] [Indexed: 02/11/2023] Open
Abstract
Flexible sensors are the essential foundations of pressure sensing, microcomputer sensing systems, and wearable devices. The flexible tactile sensor can sense stimuli by converting external forces into electrical signals. The electrical signals are transmitted to a computer processing system for analysis, realizing real-time health monitoring and human motion detection. According to the working mechanism, tactile sensors are mainly divided into four types-piezoresistive, capacitive, piezoelectric, and triboelectric tactile sensors. Conventional silicon-based tactile sensors are often inadequate for flexible electronics due to their limited mechanical flexibility. In comparison, polymeric nanocomposites are flexible and stretchable, which makes them excellent candidates for flexible and wearable tactile sensors. Among the promising polymers, conjugated polymers (CPs), due to their unique chemical structures and electronic properties that contribute to their high electrical and mechanical conductivity, show great potential for flexible sensors and wearable devices. In this paper, we first introduce the parameters of pressure sensors. Then, we describe the operating principles of resistive, capacitive, piezoelectric, and triboelectric sensors, and review the pressure sensors based on conjugated polymer nanocomposites that were reported in recent years. After that, we introduce the performance characteristics of flexible sensors, regarding their applications in healthcare, human motion monitoring, electronic skin, wearable devices, and artificial intelligence. In addition, we summarize and compare the performances of conjugated polymer nanocomposite-based pressure sensors that were reported in recent years. Finally, we summarize the challenges and future directions of conjugated polymer nanocomposite-based sensors.
Collapse
Affiliation(s)
- Qin-Teng Lai
- School of Physics and Optoelectric Engineering, Guangdong University of Technology, Guangzhou 511400, China
| | - Qi-Jun Sun
- School of Physics and Optoelectric Engineering, Guangdong University of Technology, Guangzhou 511400, China
- Department of Materials Science and Engineering, City University of Hong Kong, Hong Kong 518060, China
| | - Zhenhua Tang
- School of Physics and Optoelectric Engineering, Guangdong University of Technology, Guangzhou 511400, China
| | - Xin-Gui Tang
- School of Physics and Optoelectric Engineering, Guangdong University of Technology, Guangzhou 511400, China
| | - Xin-Hua Zhao
- Department of Chemistry, South University of Science and Technology of China, Shenzhen 518060, China
| |
Collapse
|
24
|
Mechanical and Sensing Performance under Hydrothermal Ageing of Wearable Sensors Made of Polydimethylsiloxane with Graphitic Nanofillers. Polym Degrad Stab 2023. [DOI: 10.1016/j.polymdegradstab.2023.110278] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/05/2023]
|
25
|
Cao W, Luo Y, Dai Y, Wang X, Wu K, Lin H, Rui K, Zhu J. Piezoresistive Pressure Sensor Based on a Conductive 3D Sponge Network for Motion Sensing and Human-Machine Interface. ACS APPLIED MATERIALS & INTERFACES 2023; 15:3131-3140. [PMID: 36603144 DOI: 10.1021/acsami.2c18203] [Citation(s) in RCA: 10] [Impact Index Per Article: 10.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Flexible sensors have attracted increasing attention owing to their important applications in human activity monitoring, medical diagnosis, and human-machine interaction. However, the rational design of low-cost sensors with desirable properties (e.g., high sensitivity and excellent stability) and extended applications is still a great challenge. Herein, a simple and cost-effective strategy is reported by immersing polyurethane (PU) sponge in graphene oxide solution followed by in situ chemical reduction to construct a reduced graphene oxide (RGO)-wrapped PU sponge sensor. Ascribed to the excellent compressive resilience of PU sponge and an electrically conductive RGO layer, the constructed flexible sensor exhibits satisfactory sensing performance with high sensitivity (17.65 kPa-1) in a low-load range (0-3.2 kPa), a wide compression strain range (0-80%), and reliable stability (8000 cycles). In addition, these sensors can be successfully applied to monitor human movements and identify the weight of objects. Through the use of a sensor array integrated with a signal acquisition circuit, the reasonably designed sensors can realize tactile feedback via mapping real-time spatial distribution of pressure in complicated tasks and show potential applications in flexible electronic pianos, electronic skin, and remote real-time control of home electronics.
Collapse
Affiliation(s)
- Wei Cao
- School of Flexible Electronics (Future Technologies), Key Laboratory of Flexible Electronics (KLOFE), Nanjing Tech University, 30 South Puzhu Road, Nanjing211816, P. R. China
| | - Yan Luo
- School of Flexible Electronics (Future Technologies), Key Laboratory of Flexible Electronics (KLOFE), Nanjing Tech University, 30 South Puzhu Road, Nanjing211816, P. R. China
| | - Yiming Dai
- School of Flexible Electronics (Future Technologies), Key Laboratory of Flexible Electronics (KLOFE), Nanjing Tech University, 30 South Puzhu Road, Nanjing211816, P. R. China
| | - Xin Wang
- School of Flexible Electronics (Future Technologies), Key Laboratory of Flexible Electronics (KLOFE), Nanjing Tech University, 30 South Puzhu Road, Nanjing211816, P. R. China
| | - Kaili Wu
- School of Flexible Electronics (Future Technologies), Key Laboratory of Flexible Electronics (KLOFE), Nanjing Tech University, 30 South Puzhu Road, Nanjing211816, P. R. China
| | - Huijuan Lin
- School of Flexible Electronics (Future Technologies), Key Laboratory of Flexible Electronics (KLOFE), Nanjing Tech University, 30 South Puzhu Road, Nanjing211816, P. R. China
| | - Kun Rui
- School of Flexible Electronics (Future Technologies), Key Laboratory of Flexible Electronics (KLOFE), Nanjing Tech University, 30 South Puzhu Road, Nanjing211816, P. R. China
| | - Jixin Zhu
- State Key Laboratory of Fire Science, University of Science and Technology of China, 443 Huangshan Road, Hefei230027, P. R. China
| |
Collapse
|
26
|
Zhang L, Sun Y, Peng L, Fang W, Huang Q, Zhang J, Zhang Z, Li H, Liu Y, Ying Y, Fu Y. Blood-Coagulation-Inspired Dynamic Bridging Strategy for the Fabrication of Multiscale-Assembled Hierarchical Porous Material. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2023; 10:e2204702. [PMID: 36412067 PMCID: PMC9839836 DOI: 10.1002/advs.202204702] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 08/16/2022] [Revised: 10/10/2022] [Indexed: 06/16/2023]
Abstract
Porous materials, from macroscopic bulk materials (MBs) with (sub-)millimeter-scale pores to tiny particles (TPs) with (sub-)nanometer-scale pores, have attracted ever-growing interest in various fields. However, the integration of multi-scale pores in one composite is promising but challenging, owing to the considerable gap in the scale of the pores. Inspired by blood coagulation, a fibrin-based dynamic bridging strategy is developed to fabricate a multiscale-assembled hierarchical porous material (MHPM), in which fibrin formed as the sub-framework for the weaving-narrow of MBs and the enwinding-load of TPs. The bio-polymerization nature makes the fabrication rapid, facile, and universal for the customizable integration of seven kinds of TPs and four kinds of MBs. Besides, the integration is controllable with high load capacity of TPs and is stable against external shock forces. The unique multi-level structure endows the MHPM with large and accessible surface area, and efficient mass transfer pathways, synergistically leading to high adsorption capacity and rapid kinetics in multiple adsorption models. This work suggests a strategy for the rational multi-level design and fabrication of hierarchical porous architectures.
Collapse
Affiliation(s)
- Lin Zhang
- College of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058China
- International Research Center for X PolymersDepartment of Polymer Science and EngineeringZhejiang UniversityHangzhou310027China
| | - Yuxin Sun
- College of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058China
| | - Li Peng
- International Research Center for X PolymersDepartment of Polymer Science and EngineeringZhejiang UniversityHangzhou310027China
| | - Wenzhang Fang
- International Research Center for X PolymersDepartment of Polymer Science and EngineeringZhejiang UniversityHangzhou310027China
| | - Qiao Huang
- College of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058China
| | - Jie Zhang
- College of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058China
| | - Ziyan Zhang
- College of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058China
| | - Hang Li
- International Research Center for X PolymersDepartment of Polymer Science and EngineeringZhejiang UniversityHangzhou310027China
| | - Yingjun Liu
- International Research Center for X PolymersDepartment of Polymer Science and EngineeringZhejiang UniversityHangzhou310027China
| | - Yibin Ying
- College of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058China
| | - Yingchun Fu
- College of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhou310058China
| |
Collapse
|
27
|
Kim DY, Nam KW, Kang BH, Park SH. Soft Multifunctional Porous Sponge Sensor for Pressure and Strain Using Liquid Metal/Polydimethylsiloxane with Silver-Nanowire-Coated Composite. MICROMACHINES 2022; 13:1998. [PMID: 36422427 PMCID: PMC9698561 DOI: 10.3390/mi13111998] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/01/2022] [Revised: 11/12/2022] [Accepted: 11/15/2022] [Indexed: 06/16/2023]
Abstract
Compression and tension sensors with a porous structure have attracted attention recently. Porous sponge sensors have the advantage of a wide deformation range owing to their structural characteristics. In this study, a porous sponge structure was prepared by absorbing polydimethylsiloxane (PDMS) into the matrix of porous commercial sugar cubes. A conductive network was formed by coating the outside of the sponge skeleton with silver nanowires (AgNWs), which have a high aspect ratio. In addition, a liquid metal (LM), which does not directly form an electrical network but changes from zero-dimensional to one-dimensional under an external force was introduced into this porous sponge structure. The effects of the LM on the sensor sensitivity to pressure and strain were analyzed by comparing the electrical resistance changes of PDMS/AgNW and LM/PDMS/AgNW sponge sensors under tension and pressure. This study shows that the use of a porous structure and an LM may be useful for future wearable sensor design.
Collapse
|
28
|
Liu L, Xiang D, Zhang X, Harkin‐Jones E, Wang J, Zhao C, Li H, Li Z, Wang L, Wang P, Li Y, Wu Y. Highly sensitive flexible strain sensor based on carbon nanotube/styrene butadiene styrene@ thermoplastic polyurethane fiber with a double percolated structure. POLYM ENG SCI 2022. [DOI: 10.1002/pen.26198] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/13/2022]
Affiliation(s)
- Libing Liu
- School of New Energy and Materials Southwest Petroleum University Chengdu China
| | - Dong Xiang
- School of New Energy and Materials Southwest Petroleum University Chengdu China
- The Center of Functional Materials for Working Fluids of Oil and Gas Field, Sichuan Engineering Technology Research Center of Basalt Fiber Composites Development and Application Southwest Petroleum University Chengdu China
- Collaborative Scientific Innovation Platform of Universities in Sichuan for Basalt Fiber Southwest Petroleum University Chengdu China
| | - Xiangxia Zhang
- School of New Energy and Materials Southwest Petroleum University Chengdu China
| | | | - Junjie Wang
- Department of Civil Engineering Tsinghua University Beijing China
| | - Chunxia Zhao
- School of New Energy and Materials Southwest Petroleum University Chengdu China
- The Center of Functional Materials for Working Fluids of Oil and Gas Field, Sichuan Engineering Technology Research Center of Basalt Fiber Composites Development and Application Southwest Petroleum University Chengdu China
- Collaborative Scientific Innovation Platform of Universities in Sichuan for Basalt Fiber Southwest Petroleum University Chengdu China
| | - Hui Li
- School of New Energy and Materials Southwest Petroleum University Chengdu China
- The Center of Functional Materials for Working Fluids of Oil and Gas Field, Sichuan Engineering Technology Research Center of Basalt Fiber Composites Development and Application Southwest Petroleum University Chengdu China
- Collaborative Scientific Innovation Platform of Universities in Sichuan for Basalt Fiber Southwest Petroleum University Chengdu China
| | - Zhenyu Li
- School of New Energy and Materials Southwest Petroleum University Chengdu China
- The Center of Functional Materials for Working Fluids of Oil and Gas Field, Sichuan Engineering Technology Research Center of Basalt Fiber Composites Development and Application Southwest Petroleum University Chengdu China
- Collaborative Scientific Innovation Platform of Universities in Sichuan for Basalt Fiber Southwest Petroleum University Chengdu China
| | - Li Wang
- School of New Energy and Materials Southwest Petroleum University Chengdu China
- The Center of Functional Materials for Working Fluids of Oil and Gas Field, Sichuan Engineering Technology Research Center of Basalt Fiber Composites Development and Application Southwest Petroleum University Chengdu China
- Collaborative Scientific Innovation Platform of Universities in Sichuan for Basalt Fiber Southwest Petroleum University Chengdu China
| | - Ping Wang
- School of New Energy and Materials Southwest Petroleum University Chengdu China
| | - Yuntao Li
- School of New Energy and Materials Southwest Petroleum University Chengdu China
| | - Yuanpeng Wu
- School of New Energy and Materials Southwest Petroleum University Chengdu China
- The Center of Functional Materials for Working Fluids of Oil and Gas Field, Sichuan Engineering Technology Research Center of Basalt Fiber Composites Development and Application Southwest Petroleum University Chengdu China
- Collaborative Scientific Innovation Platform of Universities in Sichuan for Basalt Fiber Southwest Petroleum University Chengdu China
| |
Collapse
|
29
|
Wang XM, Zhu B, Huang Y, Shen L, Chai Y, Han J, Yu J, Wang Z, Chen X. High-performance self-powered integrated system of pressure sensor and supercapacitor based on Cu@Cu2O/graphitic carbon layered porous structure. J Colloid Interface Sci 2022; 632:140-150. [DOI: 10.1016/j.jcis.2022.11.064] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2022] [Revised: 11/07/2022] [Accepted: 11/12/2022] [Indexed: 11/18/2022]
|
30
|
Yang S, Li H, Liu S, Wang S, Li H, Li H, Qi W, Xu Q, Zhang Q, Zhu J, Zhao P, Chen L. Wodyetia bifurcate structured carbon fabrics with durable superhydrophobicity for high-efficiency oil-water separation. JOURNAL OF HAZARDOUS MATERIALS 2022; 439:129688. [PMID: 36104914 DOI: 10.1016/j.jhazmat.2022.129688] [Citation(s) in RCA: 8] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/18/2022] [Revised: 07/20/2022] [Accepted: 07/26/2022] [Indexed: 06/15/2023]
Abstract
The superhydrophobic fiber-based membranes with features of high separation efficiency and low energy consumption for oil-water separation remains a formidable challenge. In this paper, a robust and durable superhydrophobic cotton-derived carbon fabric (CDCF) with wodyetia bifurcate-like structure is fabricated via in situ cobalt-nickel basic carbonate (CNC) deposition and 1 H, 1 H, 2 H, 2 H-perfluorooctyltriethoxysilane (POTS) coating. The combined action of rough surface structure and low surface energy makes CDCF/CNC/POTS with superhydrophobicity/superoleophilicity, anti-wetting, and self-cleaning performance. Intriguingly, the CDCF/CNC/POTS can keep its superhydrophobicity under of the water droplet impact pressure of 781 Pa. In addition to its robust dynamic superhydrophobicity, CDCF/CNC/POTS can also maintain its non-wetting property under harsh environmental conditions such as mechanical abrasion treatment, acidic, alkaline and salt solutions, and ultraviolet radiation. Importantly, the CDCF/CNC/POTS can separate various oil-water mixtures and emulsions under gravity with ultrahigh oil-water mixtures permeate flux (∼19,126 L/m2h), high surfactant-stabilized emulsion permeate flux (∼821 L/m2h), and high separation efficiency (> 98.60 %). Moreover, remarkable recyclability endow the CDCF/CNC/POTS with promising application in treating oily wastewater. This work may benefit the low-cost mass production of cotton-based carbon fabrics for developing eco-friendly high-efficiency separators.
Collapse
Affiliation(s)
- Sudong Yang
- College of Food and Biological Engineering, Institute for Advanced Study, Chengdu University, Chengdu 610106, PR China.
| | - Hongyi Li
- Guangzhou Panyu Polytechnic, Guangzhou 511483, PR China
| | - Shuai Liu
- College of Grassland and Environmental Sciences, Xinjiang Agricultural University, Urumqi 830052, PR China
| | - Shanshan Wang
- College of Grassland and Environmental Sciences, Xinjiang Agricultural University, Urumqi 830052, PR China
| | - Hongmei Li
- College of Food and Biological Engineering, Institute for Advanced Study, Chengdu University, Chengdu 610106, PR China.
| | - Huiming Li
- College of Food and Biological Engineering, Institute for Advanced Study, Chengdu University, Chengdu 610106, PR China
| | - Wensheng Qi
- College of Food and Biological Engineering, Institute for Advanced Study, Chengdu University, Chengdu 610106, PR China
| | - Qing Xu
- College of Food and Biological Engineering, Institute for Advanced Study, Chengdu University, Chengdu 610106, PR China
| | - Qian Zhang
- College of Food and Biological Engineering, Institute for Advanced Study, Chengdu University, Chengdu 610106, PR China
| | - Jie Zhu
- College of Food and Biological Engineering, Institute for Advanced Study, Chengdu University, Chengdu 610106, PR China
| | - Peng Zhao
- College of Food and Biological Engineering, Institute for Advanced Study, Chengdu University, Chengdu 610106, PR China
| | - Lin Chen
- College of Food and Biological Engineering, Institute for Advanced Study, Chengdu University, Chengdu 610106, PR China.
| |
Collapse
|
31
|
Zhou Y, Lian H, Li Z, Yin L, Ji Q, Li K, Qi F, Huang Y. Crack engineering boosts the performance of flexible sensors. VIEW 2022. [DOI: 10.1002/viw.20220025] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022] Open
Affiliation(s)
- Yunlei Zhou
- School of Mechanical Science and Engineering Huazhong University of Science and Technology Wuhan China
- State Key Laboratory of Digital Manufacturing Equipment and Technology Flexible Electronics Research Center Huazhong University of Science and Technology Wuhan China
| | - Haoxiang Lian
- School of Mechanical Science and Engineering Huazhong University of Science and Technology Wuhan China
- State Key Laboratory of Digital Manufacturing Equipment and Technology Flexible Electronics Research Center Huazhong University of Science and Technology Wuhan China
| | - Zhenlei Li
- School of Mechanical and Electric Engineering Soochow University Suzhou China
| | - Liting Yin
- School of Mechanical Science and Engineering Huazhong University of Science and Technology Wuhan China
- State Key Laboratory of Digital Manufacturing Equipment and Technology Flexible Electronics Research Center Huazhong University of Science and Technology Wuhan China
| | - Qian Ji
- School of Mechanical Science and Engineering Huazhong University of Science and Technology Wuhan China
| | - Kan Li
- School of Mechanical Science and Engineering Huazhong University of Science and Technology Wuhan China
- State Key Laboratory of Digital Manufacturing Equipment and Technology Flexible Electronics Research Center Huazhong University of Science and Technology Wuhan China
| | - Fei Qi
- School of Mechanical and Electric Engineering Soochow University Suzhou China
| | - YongAn Huang
- School of Mechanical Science and Engineering Huazhong University of Science and Technology Wuhan China
- State Key Laboratory of Digital Manufacturing Equipment and Technology Flexible Electronics Research Center Huazhong University of Science and Technology Wuhan China
| |
Collapse
|
32
|
Liu J, Wang P, Li G, Yang L, Yu W, Meng C, Guo S. A highly stretchable and ultra-sensitive strain sensing fiber based on a porous core-network sheath configuration for wearable human motion detection. NANOSCALE 2022; 14:12418-12430. [PMID: 35972043 DOI: 10.1039/d2nr03277e] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
Functional fibers have attracted much research attention due to their potential application in developing advanced electronic textiles for wearable devices. However, challenges still exist in preparing high-performance fiber-shaped sensors with superior flexibility and stretchability while achieving a high sensitivity and a wide detection range. Herein, we propose the design and fabrication of an ultra-flexible and super-elastic fiber-shaped strain sensor via a facile combining approach of wet-spinning and dip-coating. The sensor adopts a core-sheath configuration of liquid metal droplets dispersed in porous thermoplastic polyurethane as a substrate core and a carbon nanotube intertwined network embedding silver nanowires as a strain sensitive sheath. By taking advantage of both the composition of multiple functional materials and the design of a microstructured device configuration, the developed fiber-shaped sensor exhibits an ultrahigh sensitivity (maximum gauge factor of 7336.1), an extremely large workable strain range (500%), a low strain detection limit (0.5%), a fast response time (200 ms) and good stability (10 000 cycles). In addition, the sensor is temperature insensitive, inert under harsh solution conditions, degradable and recyclable. Intriguingly, the fiber-shaped sensor can be used to detect various human motions and gestures by directly attaching to skins or elaborately weaving into textiles, demonstrating its great potential in human healthcare monitoring and human-machine interactions.
Collapse
Affiliation(s)
- Jun Liu
- State Key Laboratory for Reliability and Intelligence of Electrical Equipment, Hebei Key Laboratory of Smart Sensing and Human-Robot Interaction, School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, China.
| | - Peng Wang
- State Key Laboratory for Reliability and Intelligence of Electrical Equipment, Hebei Key Laboratory of Smart Sensing and Human-Robot Interaction, School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, China.
| | - Guoxian Li
- State Key Laboratory for Reliability and Intelligence of Electrical Equipment, Hebei Key Laboratory of Smart Sensing and Human-Robot Interaction, School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, China.
| | - Li Yang
- State Key Laboratory of Reliability and Intelligence of Electrical Equipment, School of Health Sciences and Biomedical Engineering, Hebei University of Technology, Tianjin 300130, China
| | - Wei Yu
- State Key Laboratory for Reliability and Intelligence of Electrical Equipment, Hebei Key Laboratory of Smart Sensing and Human-Robot Interaction, School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, China.
| | - Chuizhou Meng
- State Key Laboratory for Reliability and Intelligence of Electrical Equipment, Hebei Key Laboratory of Smart Sensing and Human-Robot Interaction, School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, China.
| | - Shijie Guo
- State Key Laboratory for Reliability and Intelligence of Electrical Equipment, Hebei Key Laboratory of Smart Sensing and Human-Robot Interaction, School of Mechanical Engineering, Hebei University of Technology, Tianjin, 300401, China.
| |
Collapse
|
33
|
Fei Y, Jiang R, Fang W, Liu T, Saeb MR, Hejna A, Ehsani M, Barczewski M, Sajadi SM, Chen F, Kuang T. Highly sensitive large strain cellulose/multiwalled carbon nanotubes (MWCNTs)/thermoplastic polyurethane (TPU) nanocomposite foams: From design to performance evaluation. J Supercrit Fluids 2022. [DOI: 10.1016/j.supflu.2022.105653] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
34
|
Wearable and stretchable conductive polymer composites for strain sensors: How to design a superior one? NANO MATERIALS SCIENCE 2022. [DOI: 10.1016/j.nanoms.2022.08.003] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|
35
|
Shen Z, Liu F, Huang S, Wang H, Yang C, Hang T, Tao J, Xia W, Xie X. Progress of flexible strain sensors for physiological signal monitoring. Biosens Bioelectron 2022; 211:114298. [DOI: 10.1016/j.bios.2022.114298] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/02/2021] [Revised: 04/15/2022] [Accepted: 04/19/2022] [Indexed: 11/27/2022]
|
36
|
Li J, Li N, Zheng Y, Lou D, Jiang Y, Jiang J, Xu Q, Yang J, Sun Y, Pan C, Wang J, Peng Z, Zheng Z, Liu W. Interfacially Locked Metal Aerogel Inside Porous Polymer Composite for Sensitive and Durable Flexible Piezoresistive Sensors. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2201912. [PMID: 35748166 PMCID: PMC9376829 DOI: 10.1002/advs.202201912] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/02/2022] [Revised: 05/16/2022] [Indexed: 05/31/2023]
Abstract
Flexible pressure sensors play significant roles in wearable devices, electronic skins, and human-machine interface (HMI). However, it remains challenging to develop flexible piezoresistive sensors with outstanding comprehensive performances, especially with excellent long-term durability. Herein, a facile "interfacial locking strategy" has been developed to fabricate metal aerogel-based pressure sensors with excellent sensitivity and prominent stability. The strategy broke the bottleneck of the intrinsically poor mechanical properties of metal aerogels by grafting them on highly elastic melamine sponge with the help of a thin polydimethylsiloxane (PDMS) layer as the interface-reinforcing media. The hierarchically porous conductive structure of the ensemble offered the as-prepared flexible piezoresistive sensor with a sensitivity as high as 12 kPa-1 , a response time as fast as 85 ms, and a prominent durability over 23 000 compression cycles. The excellent comprehensive performance enables the successful application of the flexible piezoresistive sensor as two-dimensional (2D) array device as well as three-dimensional (3D) force-detecting device for real-time monitoring of HMI activities.
Collapse
Affiliation(s)
- Jian Li
- The Key Laboratory of Low‐Carbon Chemistry & Energy Conservation of Guangdong ProvinceKey Laboratory for Polymeric Composite and Functional Materials of Ministry of EducationState Key Laboratory of Optoelectronic Materials and TechnologiesSchool of Materials Science and EngineeringSun Yat‐sen UniversityGuangzhou510006P. R. China
| | - Ning Li
- Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong ProvinceCollege of Physics and Optoelectronic EngineeringShenzhen UniversityShenzhen518060P. R. China
| | - Yuanyuan Zheng
- The Key Laboratory of Low‐Carbon Chemistry & Energy Conservation of Guangdong ProvinceKey Laboratory for Polymeric Composite and Functional Materials of Ministry of EducationState Key Laboratory of Optoelectronic Materials and TechnologiesSchool of Materials Science and EngineeringSun Yat‐sen UniversityGuangzhou510006P. R. China
| | - Dongyang Lou
- The Key Laboratory of Low‐Carbon Chemistry & Energy Conservation of Guangdong ProvinceKey Laboratory for Polymeric Composite and Functional Materials of Ministry of EducationState Key Laboratory of Optoelectronic Materials and TechnologiesSchool of Materials Science and EngineeringSun Yat‐sen UniversityGuangzhou510006P. R. China
| | - Yue Jiang
- Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong ProvinceCollege of Physics and Optoelectronic EngineeringShenzhen UniversityShenzhen518060P. R. China
| | - Jiaxi Jiang
- Center for Advanced Mechanics and MaterialsApplied Mechanics LaboratoryDepartment of Engineering MechanicsTsinghua UniversityBeijing100084P. R. China
| | - Qunhui Xu
- Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong ProvinceCollege of Physics and Optoelectronic EngineeringShenzhen UniversityShenzhen518060P. R. China
| | - Jing Yang
- The Key Laboratory of Low‐Carbon Chemistry & Energy Conservation of Guangdong ProvinceKey Laboratory for Polymeric Composite and Functional Materials of Ministry of EducationState Key Laboratory of Optoelectronic Materials and TechnologiesSchool of Materials Science and EngineeringSun Yat‐sen UniversityGuangzhou510006P. R. China
| | - Yujing Sun
- The Key Laboratory of Low‐Carbon Chemistry & Energy Conservation of Guangdong ProvinceKey Laboratory for Polymeric Composite and Functional Materials of Ministry of EducationState Key Laboratory of Optoelectronic Materials and TechnologiesSchool of Materials Science and EngineeringSun Yat‐sen UniversityGuangzhou510006P. R. China
| | - Chuxuan Pan
- The Key Laboratory of Low‐Carbon Chemistry & Energy Conservation of Guangdong ProvinceKey Laboratory for Polymeric Composite and Functional Materials of Ministry of EducationState Key Laboratory of Optoelectronic Materials and TechnologiesSchool of Materials Science and EngineeringSun Yat‐sen UniversityGuangzhou510006P. R. China
| | - Jianlan Wang
- The Key Laboratory of Low‐Carbon Chemistry & Energy Conservation of Guangdong ProvinceKey Laboratory for Polymeric Composite and Functional Materials of Ministry of EducationState Key Laboratory of Optoelectronic Materials and TechnologiesSchool of Materials Science and EngineeringSun Yat‐sen UniversityGuangzhou510006P. R. China
| | - Zhengchun Peng
- Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong ProvinceCollege of Physics and Optoelectronic EngineeringShenzhen UniversityShenzhen518060P. R. China
| | - Zhikun Zheng
- Key Laboratory for Polymeric Composite and Functional Materials of Ministry of EducationState Key Laboratory of Optoelectronic Materials and TechnologiesSchool of chemistrySun Yat‐sen UniversityGuangzhou510006P. R. China
| | - Wei Liu
- The Key Laboratory of Low‐Carbon Chemistry & Energy Conservation of Guangdong ProvinceKey Laboratory for Polymeric Composite and Functional Materials of Ministry of EducationState Key Laboratory of Optoelectronic Materials and TechnologiesSchool of Materials Science and EngineeringSun Yat‐sen UniversityGuangzhou510006P. R. China
| |
Collapse
|
37
|
Li S, Chen H, Liu X, Li P, Wu W. Nanocellulose as a promising substrate for advanced sensors and their applications. Int J Biol Macromol 2022; 218:473-487. [PMID: 35870627 DOI: 10.1016/j.ijbiomac.2022.07.124] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/21/2022] [Revised: 07/14/2022] [Accepted: 07/17/2022] [Indexed: 01/14/2023]
Abstract
Nanocellulose has broad and promising applications owing to its low density, large specific surface area, high mechanical strength, modifiability, renewability. Recently, nanocellulose has been widely used to fabricate flexible, durable and environmental-friendly sensor substrates. In this contribution, the construction and characteristics of nanocellulose-based sensors are comprehensively reviewed. Various nanocellulose-based sensors are summarized and divided into colorimetric, fluorescent, electronic, electrochemical and SERS types according to the sensing mechanism. This review also introduces the applications of nanocellulose-based sensors in the fields of biomedicine, environmental monitoring, food safety, and wearable devices.
Collapse
Affiliation(s)
- Sijie Li
- Jiangsu Co-Innovation Center for Efficient Processing and Utilization of Forest Resources, College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Haibo Chen
- School of Electronic and Information Engineering, Soochow University, Suzhou 215000, Jiangsu, China
| | - Xingyue Liu
- Jiangsu Co-Innovation Center for Efficient Processing and Utilization of Forest Resources, College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China
| | - Peng Li
- School of Electronic and Information Engineering, Soochow University, Suzhou 215000, Jiangsu, China.
| | - Weibing Wu
- Jiangsu Co-Innovation Center for Efficient Processing and Utilization of Forest Resources, College of Light Industry and Food Engineering, Nanjing Forestry University, Nanjing 210037, China.
| |
Collapse
|
38
|
Luo XL, Schubert DW. Experimental and Theoretical Study on Piezoresistive Behavior of Compressible Melamine Sponge Modified by Carbon-based Fillers. CHINESE JOURNAL OF POLYMER SCIENCE 2022. [DOI: 10.1007/s10118-022-2771-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/24/2022]
|
39
|
Sang S, Pei Z, Zhang F, Ji C, Li Q, Ji J, Yang K, Zhang Q. Three-Dimensional Printed Bimodal Electronic Skin with High Resolution and Breathability for Hair Growth. ACS APPLIED MATERIALS & INTERFACES 2022; 14:31493-31501. [PMID: 35767549 DOI: 10.1021/acsami.2c09311] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/15/2023]
Abstract
People with neurological deficits face difficulties perceiving their surroundings, resulting in an urgent need for wearable electronic skin (e-skin) that can monitor external stimuli and temperature changes. However, the monolithic structure of e-skin is not conducive to breathability and hinders hair growth, limiting its wearing comfort. In this work, we prepared fully three-dimensional (3D) printed e-skin that allowed hair penetration and growth. This e-skin also achieved simultaneous pressure and temperature detection and a high tactile resolution of 100 cm-2, which is close to that of human fingertips. The temperature sensor maintained linear measurements within 10-60 °C. The pore microstructure prepared by a sacrificial template method helped the pressure-sensing unit achieve a high sensitivity of 0.213 kPa-1. Considering the distribution of human hair, the design of the main structure of the e-skin was studied to realize hair penetration and growth. High-performance pressure-sensitive inks and transparent flexible substrate inks for 3D printing were developed, and e-skins combining these functions were realized through multimaterial in situ 3D printing with high accuracy and high consistency. The temperature and pressure sensors separately performed simultaneous detection without interference, and the tactile sensor array accurately identified stimuli at different locations.
Collapse
Affiliation(s)
- Shengbo Sang
- Shanxi Key Laboratory of Micro Nano Sensors & Artificial Intelligence Perception, College of Information and Computer, Taiyuan University of Technology, Taiyuan 030024, China
- Key Lab of Advanced Transducers and Intelligent Control System of the Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
| | - Zhen Pei
- Shanxi Key Laboratory of Micro Nano Sensors & Artificial Intelligence Perception, College of Information and Computer, Taiyuan University of Technology, Taiyuan 030024, China
- Key Lab of Advanced Transducers and Intelligent Control System of the Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
- Department of Mechanical Engineering, National University of Singapore, 117575 Singapore
| | - Fan Zhang
- Shanxi Key Laboratory of Micro Nano Sensors & Artificial Intelligence Perception, College of Information and Computer, Taiyuan University of Technology, Taiyuan 030024, China
- Key Lab of Advanced Transducers and Intelligent Control System of the Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
- Shanxi Research Institute of 6D Artificial Intelligence Biomedical Science, Taiyuan 030024, China
| | - Chao Ji
- Shanxi Key Laboratory of Micro Nano Sensors & Artificial Intelligence Perception, College of Information and Computer, Taiyuan University of Technology, Taiyuan 030024, China
- Key Lab of Advanced Transducers and Intelligent Control System of the Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
| | - Qiang Li
- Shanxi Key Laboratory of Micro Nano Sensors & Artificial Intelligence Perception, College of Information and Computer, Taiyuan University of Technology, Taiyuan 030024, China
- Key Lab of Advanced Transducers and Intelligent Control System of the Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
| | - Jianlong Ji
- Shanxi Key Laboratory of Micro Nano Sensors & Artificial Intelligence Perception, College of Information and Computer, Taiyuan University of Technology, Taiyuan 030024, China
- Key Lab of Advanced Transducers and Intelligent Control System of the Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
| | - Kun Yang
- Shanxi Key Laboratory of Micro Nano Sensors & Artificial Intelligence Perception, College of Information and Computer, Taiyuan University of Technology, Taiyuan 030024, China
- Key Lab of Advanced Transducers and Intelligent Control System of the Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
| | - Qiang Zhang
- Shanxi Key Laboratory of Micro Nano Sensors & Artificial Intelligence Perception, College of Information and Computer, Taiyuan University of Technology, Taiyuan 030024, China
- Key Lab of Advanced Transducers and Intelligent Control System of the Ministry of Education, Taiyuan University of Technology, Taiyuan 030024, China
| |
Collapse
|
40
|
Yin Y, Guo C, Li H, Yang H, Xiong F, Chen D. The Progress of Research into Flexible Sensors in the Field of Smart Wearables. SENSORS (BASEL, SWITZERLAND) 2022; 22:s22145089. [PMID: 35890768 PMCID: PMC9319532 DOI: 10.3390/s22145089] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/20/2022] [Revised: 07/02/2022] [Accepted: 07/03/2022] [Indexed: 05/14/2023]
Abstract
In modern society, technology associated with smart sensors made from flexible materials is rapidly evolving. As a core component in the field of wearable smart devices (or 'smart wearables'), flexible sensors have the advantages of excellent flexibility, ductility, free folding properties, and more. When choosing materials for the development of sensors, reduced weight, elasticity, and wearer's convenience are considered as advantages, and are suitable for electronic skin, monitoring of health-related issues, biomedicine, human-computer interactions, and other fields of biotechnology. The idea behind wearable sensory devices is to enable their easy integration into everyday life. This review discusses the concepts of sensory mechanism, detected object, and contact form of flexible sensors, and expounds the preparation materials and their applicability. This is with the purpose of providing a reference for the further development of flexible sensors suitable for wearable devices.
Collapse
Affiliation(s)
- Yunlei Yin
- College of Textile, Zhongyuan University of Technology, Zhengzhou 450007, China; (C.G.); (H.L.); (H.Y.); (F.X.); (D.C.)
- Correspondence:
| | - Cheng Guo
- College of Textile, Zhongyuan University of Technology, Zhengzhou 450007, China; (C.G.); (H.L.); (H.Y.); (F.X.); (D.C.)
| | - Hong Li
- College of Textile, Zhongyuan University of Technology, Zhengzhou 450007, China; (C.G.); (H.L.); (H.Y.); (F.X.); (D.C.)
| | - Hongying Yang
- College of Textile, Zhongyuan University of Technology, Zhengzhou 450007, China; (C.G.); (H.L.); (H.Y.); (F.X.); (D.C.)
- Henan Province Collaborative Innovation Center of Textile and Garment Industry, Zhengzhou 450007, China
| | - Fan Xiong
- College of Textile, Zhongyuan University of Technology, Zhengzhou 450007, China; (C.G.); (H.L.); (H.Y.); (F.X.); (D.C.)
| | - Dongyi Chen
- College of Textile, Zhongyuan University of Technology, Zhengzhou 450007, China; (C.G.); (H.L.); (H.Y.); (F.X.); (D.C.)
- College of Automation Engineering, University of Electronic Science and Technology, Chengdu 611731, China
| |
Collapse
|
41
|
Highly Compressible and Sensitive Flexible Piezoresistive Pressure Sensor Based on MWCNTs/Ti3C2Tx MXene @ Melamine Foam for Human Gesture Monitoring and Recognition. NANOMATERIALS 2022; 12:nano12132225. [PMID: 35808061 PMCID: PMC9268708 DOI: 10.3390/nano12132225] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 05/21/2022] [Revised: 06/22/2022] [Accepted: 06/26/2022] [Indexed: 11/25/2022]
Abstract
Flexible sensing devices provide a convenient and effective solution for real-time human motion monitoring, but achieving efficient and low-cost assembly of pressure sensors with high performance remains a considerable challenge. Herein, a highly compressible and sensitive flexible foam-shaped piezoresistive pressure sensor was prepared by sequential fixing multiwalled carbon nanotubes and Ti3C2Tx MXene on the skeleton of melamine foam. Due to the porous skeleton of the melamine foam and the extraordinary electrical properties of the conductive fillers, the obtained MWCNTs/Ti3C2Tx MXene @ melamine foam device features high sensitivity of 0.339 kPa−1, a wide working range up to 180 kPa, a desirable response time and excellent cyclic stability. The sensing mechanism of the composite foam device is attributed to the change in the conductive pathways between adjacent porous skeletons. The proposed sensor can be used successfully to monitor human gestures in real-time, such as finger bending and tilting, scrolling the mouse and stretching fingers. By combining with the decision tree algorithm, the sensor can unambiguously classify different Arabic numeral gestures with an average recognition accuracy of 98.9%. Therefore, our fabricated foam-shaped sensor may have great potential as next-generation wearable electronics to accurately acquire and recognize human gesture signals in various practical applications.
Collapse
|
42
|
Zhou M, Wang Y, Chen W, Wang J. Structural Design and Performance Research of a Knitted Flexible Sensor. ACS OMEGA 2022; 7:21701-21713. [PMID: 35785317 PMCID: PMC9245112 DOI: 10.1021/acsomega.2c01710] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/21/2022] [Accepted: 06/02/2022] [Indexed: 06/15/2023]
Abstract
This paper mainly studies the structure and performance of a smart knitting sensor and selects three kinds, 1 + 1, 2 + 2, and 2 + 1, of fake rib stitches. 70D and 100D silver-plated conductive yarns with a 40D carbon black conductive yarn are knitted into different fabrics in the way of plating. Finally, the related properties of the conductive fabrics of different sizes are studied. This study found that the prepared knitted fabrics can not only meet the requirements of air permeability standards in both the plain needle area and the plated area greatly but also have good elastic recovery. When the number of the plated conductive yarn is the same, the conductivity of the fabric increases with the increase in the conductive yarn wale number, and the smaller the number of plated yarns, the greater the influence of the wale number on the change in conductivity. When the number of plated yarn wales is the same, the conductivity of the fabric decreases with the increase in the conductive yarn course number, and the smaller the wale number, the smaller the effect of the course number on the change in conductivity. When the fabric formed by a silver-plated conductive yarn is in a stretched state, the conductivity decreases. However, the electrical conductivity of the 100D silver-plated fabric is more stable than that of the 70D silver-plated fabric. The conductivity of the carbon black conductive fabric is in the order of MΩ, and the conductivity of the conductive fabric changes greatly and disperses when the conductive fabric is in a stretched state. The conductive stability of the 1 + 1 fake rib stitch samples was the best before washing. On the contrary, the conductive stability of the 2 + 2 fake rib stitch fabrics was relatively good after washing.
Collapse
|
43
|
Zhang ZQ, Zhang XL, Xu GS, Liu XJ, Guo Q, Feng Z, Jia JT, Ku PT. Fabrication of polydimethylsiloxane/graphene flexible strain sensors by using the scraping and coating method. THE REVIEW OF SCIENTIFIC INSTRUMENTS 2022; 93:065001. [PMID: 35778021 DOI: 10.1063/5.0089849] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/01/2022] [Accepted: 05/13/2022] [Indexed: 06/15/2023]
Abstract
Production of flexible strain sensors is complex, time-consuming, and expensive. In this study, a novel fabrication method of polydimethylsiloxane/graphene nanocomposite conductive materials was proposed by using the scraping and coating method for manufacturing sandwich-shape flexible strain sensors. A ZQ-60B tensile testing machine was employed to test the mechanical properties of flexible sensors with 1%, 3%, and 5% graphene content. The results revealed that the stress and strain of the flexible strain sensor exhibited a linear relationship, and the linear correlation coefficients were 0.99706, 0.99819, and 0.99826, respectively. The concentration of graphene was 1%, 3%, and 5%, and the gauge factors (GFs) of the sensor were 24, 6, and 3, respectively. With the increase in the graphene content, the GF decreased gradually. This phenomenon could be attributed to tunneling, which increased the number of conductive pathways with an increase in the graphene content. Furthermore, the sensor exhibited excellent stability after 100 cycles of stretching/scaling. The finger joint bending test revealed that the flexible strain sensor is reproducible and exhibits excellent application prospects in monitoring human movement and health.
Collapse
Affiliation(s)
- Zhou Q Zhang
- School of Mechanical and Electrical Engineering, Xi'an Polytechnic University, No. 19, Jinhua south road, Xi'an, Shaanxi 710048, China
| | - Xue L Zhang
- School of Mechanical and Electrical Engineering, Xi'an Polytechnic University, No. 19, Jinhua south road, Xi'an, Shaanxi 710048, China
| | - Guang S Xu
- School of Mechanical and Electrical Engineering, Xi'an Polytechnic University, No. 19, Jinhua south road, Xi'an, Shaanxi 710048, China
| | - Xue J Liu
- School of Mechanical and Electrical Engineering, Xi'an Polytechnic University, No. 19, Jinhua south road, Xi'an, Shaanxi 710048, China
| | - Q Guo
- School of Mechanical and Electrical Engineering, Xi'an Polytechnic University, No. 19, Jinhua south road, Xi'an, Shaanxi 710048, China
| | - Z Feng
- School of Mechanical and Electrical Engineering, Xi'an Polytechnic University, No. 19, Jinhua south road, Xi'an, Shaanxi 710048, China
| | - Jiang T Jia
- School of Mechanical and Electrical Engineering, Xi'an Polytechnic University, No. 19, Jinhua south road, Xi'an, Shaanxi 710048, China
| | - Peng T Ku
- School of Mechanical and Electrical Engineering, Xi'an Polytechnic University, No. 19, Jinhua south road, Xi'an, Shaanxi 710048, China
| |
Collapse
|
44
|
Xiu H, Zhao H, Dai L, Li J, Wang Z, Cui Y, Bai Y, Zheng X, Li J. Robust and adhesive lignin hybrid hydrogel as an ultrasensitive sensor. Int J Biol Macromol 2022; 213:226-233. [PMID: 35654216 DOI: 10.1016/j.ijbiomac.2022.05.168] [Citation(s) in RCA: 11] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/19/2022] [Revised: 05/16/2022] [Accepted: 05/24/2022] [Indexed: 12/18/2022]
Abstract
The fabrication of hydrogel for sensing purposes remains to be a challenge since the hydrogel needs to have both good mechanical strength and adhesiveness. This work reports a robust and adhesive hydrogel mainly constructed with AgNPs@lignin, polyacrylamide (PAM) and sodium alginate (SA). The silver nanoparticles (AgNPs) were in-situ generated via the reaction between lignin and silver ammonia ([Ag(NH3)2]+). The resultant lignin hybrid hydrogel exhibited a stress, strain and tearing energy up to 0.055 MPa, 1000% and 250 J·m-2, respectively. Furthermore, the hydrogel adhered to different materials with an adhesion energy of higher than 230 J·m-2. This hydrogel was demonstrated to be an ideal sensing material since it could detect both large-scale motions and tiny physiological signals including breathing and pulse. The hydrogel also exhibited good antibacterial performance and biocompatibility. This work provides a good example to design a lignin-based high-performance hydrogel material for sensing purposes.
Collapse
Affiliation(s)
- Huijuan Xiu
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China
| | - Haizhi Zhao
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China
| | - Lei Dai
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China.
| | - Jingyu Li
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China
| | - Zhi Wang
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China
| | - Yuxin Cui
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China
| | - Yurou Bai
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China
| | - Xinyi Zheng
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China
| | - Jinbao Li
- College of Bioresources Chemical and Materials Engineering, Shaanxi University of Science and Technology, Xi'an 710021, China.
| |
Collapse
|
45
|
Solazzo M, Hartzell L, O’Farrell C, Monaghan MG. Beyond Chemistry: Tailoring Stiffness and Microarchitecture to Engineer Highly Sensitive Biphasic Elastomeric Piezoresistive Sensors. ACS APPLIED MATERIALS & INTERFACES 2022; 14:19265-19277. [PMID: 35452235 PMCID: PMC9073843 DOI: 10.1021/acsami.2c04673] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 03/16/2022] [Accepted: 04/11/2022] [Indexed: 06/14/2023]
Abstract
Carbon-based nanoparticles and conductive polymers are two classes of materials widely used in the production of three-dimensional (3D) piezoresistive sensors. One conductive polymer, poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS) has excellent stability and conductivity yet is limited in its application as a sensor, often existing upon a base, limiting its performance and potential. Despite much progress in the field of materials chemistry and polymer synthesis, one aspect we consider worthy of exploration is the impact that microstructure and stiffness may have on the sensitivity of 3D sensors. In this study, we report a strategy for fabricating biphasic electroactive sponges (EAS) that combine 3D porous PEDOT:PSS scaffolds possessing either an isotropic or anisotropic microarchitecture, infused with insulating elastomeric fillers of varying stiffness. When characterizing the electromechanical behavior of these EAS, a higher stiffness yields a higher strain gauge factor, with values as high as 387 for an isotropic microarchitecture infused with a stiff elastomer. The approach we describe is cost-effective and extremely versatile, by which one can fabricate piezoresistive sensors with adaptable sensitivity ranges and excellent high strain gauge factor with the underlying microarchitecture and insulant stiffness dictating this performance.
Collapse
Affiliation(s)
- Matteo Solazzo
- Department
of Mechanical, Manufacturing and Biomedical Engineering, Trinity College Dublin, Dublin 2, Ireland
- Trinity
Centre for Biomedical Engineering, Trinity
College Dublin, Dublin 2, Ireland
| | - Linette Hartzell
- Department
of Mechanical, Manufacturing and Biomedical Engineering, Trinity College Dublin, Dublin 2, Ireland
- Trinity
Centre for Biomedical Engineering, Trinity
College Dublin, Dublin 2, Ireland
| | - Ciara O’Farrell
- Department
of Mechanical, Manufacturing and Biomedical Engineering, Trinity College Dublin, Dublin 2, Ireland
- Trinity
Centre for Biomedical Engineering, Trinity
College Dublin, Dublin 2, Ireland
| | - Michael G. Monaghan
- Department
of Mechanical, Manufacturing and Biomedical Engineering, Trinity College Dublin, Dublin 2, Ireland
- Trinity
Centre for Biomedical Engineering, Trinity
College Dublin, Dublin 2, Ireland
- Advance
Materials and BioEngineering Research (AMBER) Centre at Trinity College Dublin and the Royal College of Surgeons
in Ireland, Dublin 2, Ireland
- CÚRAM,
Centre for Research in Medical Devices, National University of Ireland, Galway, Newcastle Road, H91 W2TY Galway, Ireland
| |
Collapse
|
46
|
Lan L, Ping J, Xiong J, Ying Y. Sustainable Natural Bio-Origin Materials for Future Flexible Devices. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2200560. [PMID: 35322600 PMCID: PMC9130888 DOI: 10.1002/advs.202200560] [Citation(s) in RCA: 21] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/28/2022] [Revised: 02/27/2022] [Indexed: 05/12/2023]
Abstract
Flexible devices serve as important intelligent interfaces in various applications involving health monitoring, biomedical therapies, and human-machine interfacing. To address the concern of electronic waste caused by the increasing usage of electronic devices based on synthetic polymers, bio-origin materials that possess environmental benignity as well as sustainability offer new opportunities for constructing flexible electronic devices with higher safety and environmental adaptivity. Herein, the bio-source and unique molecular structures of various types of natural bio-origin materials are briefly introduced. Their properties and processing technologies are systematically summarized. Then, the recent progress of these materials for constructing emerging intelligent flexible electronic devices including energy harvesters, energy storage devices, and sensors are introduced. Furthermore, the applications of these flexible electronic devices including biomedical implants, artificial e-skin, and environmental monitoring are summarized. Finally, future challenges and prospects for developing high-performance bio-origin material-based flexible devices are discussed. This review aims to provide a comprehensive and systematic summary of the latest advances in the natural bio-origin material-based flexible devices, which is expected to offer inspirations for exploitation of green flexible electronics, bridging the gap in future human-machine-environment interactions.
Collapse
Affiliation(s)
- Lingyi Lan
- Laboratory of Agricultural Information Intelligent SensingSchool of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhouZhejiang310058China
- Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang ProvinceHangzhouZhejiang310058China
| | - Jianfeng Ping
- Laboratory of Agricultural Information Intelligent SensingSchool of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhouZhejiang310058China
- Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang ProvinceHangzhouZhejiang310058China
| | - Jiaqing Xiong
- Innovation Center for Textile Science and TechnologyDonghua University2999 North Renmin RoadShanghai201620China
| | - Yibin Ying
- Laboratory of Agricultural Information Intelligent SensingSchool of Biosystems Engineering and Food ScienceZhejiang UniversityHangzhouZhejiang310058China
- Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang ProvinceHangzhouZhejiang310058China
| |
Collapse
|
47
|
Fu D, Wang R, Wang Y, Sun Q, Cheng C, Guo X, Yang R. An easily processable silver nanowires-dual-cellulose conductive paper for versatile flexible pressure sensors. Carbohydr Polym 2022; 283:119135. [DOI: 10.1016/j.carbpol.2022.119135] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/07/2021] [Revised: 01/09/2022] [Accepted: 01/09/2022] [Indexed: 12/25/2022]
|
48
|
Jhou YR, Wang CH, Tsai HP, Shan YS, Lee GB. An integrated microfluidic platform featuring real-time reverse transcription loop-mediated isothermal amplification for detection of COVID-19. SENSORS AND ACTUATORS. B, CHEMICAL 2022; 358:131447. [PMID: 35095200 DOI: 10.1016/j.snb.2022.131497] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/06/2021] [Revised: 01/17/2022] [Accepted: 01/18/2022] [Indexed: 05/24/2023]
Abstract
An integrated microfluidic platform (IMP) utilizing real-time reverse-transcription loop-mediated isothermal amplification (RT-LAMP) was developed here for detection and quantification of three genes of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2; i.e., coronavirus diseases 2019 (COVID-19)): RNA-dependent RNA polymerase, the envelope gene, and the nucleocapsid gene for molecular diagnosis. The IMP comprised a microfluidic chip, a temperature control module, a fluidic control module that collectively carried out viral lysis, RNA extraction, RT-LAMP, and the real-time detection within 90 min in an automatic format. A limit of detection of 5 × 103 copies/reaction for each gene was determined with three samples including synthesized RNAs, inactive viruses, and RNAs extracted from clinical samples; this compact platform could be a useful tool for COVID-19 diagnostics.
Collapse
Affiliation(s)
- You-Ru Jhou
- Department of Power Mechanical Engineering, National Tsing Hua University, Hsinchu, Taiwan
| | - Chih-Hung Wang
- Department of Power Mechanical Engineering, National Tsing Hua University, Hsinchu, Taiwan
| | - Huey-Pin Tsai
- Department of Pathology, National Cheng Kung University Hospital, College of Medicine, National Cheng Kung University, Tainan, Taiwan
- Department of Medical Laboratory Science and Biotechnology, College of Medicine, National Cheng Kung University, Tainan, Taiwan
| | - Yan-Shen Shan
- Institute of Clinical Medicine, National Cheng Kung University Hospital, National Cheng Kung University, Tainan, Taiwan
- Division of General Surgery, Department of Surgery, National Cheng Kung University Hospital, College of Medicine, National Cheng Kung University, Tainan, Taiwan
| | - Gwo-Bin Lee
- Department of Power Mechanical Engineering, National Tsing Hua University, Hsinchu, Taiwan
- Institute of Nano Engineering and Microsystems, National Tsing Hua University, Hsinchu, Taiwan
| |
Collapse
|
49
|
Preparation of a Vertical Graphene-Based Pressure Sensor Using PECVD at a Low Temperature. MICROMACHINES 2022; 13:mi13050681. [PMID: 35630148 PMCID: PMC9146447 DOI: 10.3390/mi13050681] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/09/2022] [Revised: 04/24/2022] [Accepted: 04/25/2022] [Indexed: 11/16/2022]
Abstract
Flexible pressure sensors have received much attention due to their widespread potential applications in electronic skins, health monitoring, and human-machine interfaces. Graphene and its derivatives hold great promise for two-dimensional sensing materials, owing to their superior properties, such as atomically thin, transparent, and flexible structure. The high performance of most graphene-based pressure piezoresistive sensors relies excessively on the preparation of complex, post-growth transfer processes. However, the majority of dielectric substrates cannot hold in high temperatures, which can induce contamination and structural defects. Herein, a credibility strategy is reported for directly growing high-quality vertical graphene (VG) on a flexible and stretchable mica paper dielectric substrate with individual interdigital electrodes in plasma-enhanced chemical vapor deposition (PECVD), which assists in inducing electric field, resulting in a flexible, touchable pressure sensor with low power consumption and portability. Benefitting from its vertically directed graphene microstructure, the graphene-based sensor shows superior properties of high sensitivity (4.84 KPa-1) and a maximum pressure range of 120 KPa, as well as strong stability (5000 cycles), which makes it possible to detect small pulse pressure and provide options for preparation of pressure sensors in the future.
Collapse
|
50
|
Zhu M, Yan X, Lei Y, Guo J, Xu Y, Xu H, Dai L, Kong L. An Ultrastrong and Antibacterial Silver Nanowire/Aligned Cellulose Scaffold Composite Film for Electromagnetic Interference Shielding. ACS APPLIED MATERIALS & INTERFACES 2022; 14:14520-14531. [PMID: 35306804 DOI: 10.1021/acsami.1c23515] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/14/2023]
Abstract
Constructing multifunctional electromagnetic interference (EMI) shielding films with superior mechanical strength has sparked a lot of interest in the fields of wearable electronics. In this work, the conductive silver nanowires (AgNWs) were synthesized and impregnated into the highly aligned cellulose scaffold (CS) fabricated by wood delignification followed by hot-pressing and polydimethylsiloxane (PDMS) dipping processes to obtain the outstanding EMI shielding cellulosic film (d-AgNWs@CS-PDMS). The consecutively conductive pathway of AgNWs was constructed in the microchannels of the CS as a result of the hydrogen bonding between AgNWs and cellulose fibers, which is conducive to the reflection of incident EM waves. The higher degree of nanofiber alignment and the compact conductive network were improved by densification upon hot pressing, which endows the composite film with striking mechanical properties (maximum tensile strength of 511.8 MPa) and superb EMI shielding performance (shielding effectiveness value of 46 dB with a filler content of 21.6 wt %) at the X band (8.2-12.4 GHz). Moreover, the existence of an intensive AgNWs network and the introduction of the PDMS layer improve the hydrophobicity and antibacterial activity of the composite film, avoiding serious health concerns in the long-term wearing. These results demonstrate that the obtained d-AgNWs@CS-PDMS composite film has high potential as an EMI shielding material used for wearable devices.
Collapse
Affiliation(s)
- Meng Zhu
- Shaanxi Provincal Key Laboratory of Papermaking Technology and Specialty Paper Development, Key Laboratory of Paper-Based Functional Materials, China National Light Industry, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Xuanxuan Yan
- Shaanxi Provincal Key Laboratory of Papermaking Technology and Specialty Paper Development, Key Laboratory of Paper-Based Functional Materials, China National Light Industry, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Yuting Lei
- Shaanxi Provincal Key Laboratory of Papermaking Technology and Specialty Paper Development, Key Laboratory of Paper-Based Functional Materials, China National Light Industry, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Junhao Guo
- Shaanxi Provincal Key Laboratory of Papermaking Technology and Specialty Paper Development, Key Laboratory of Paper-Based Functional Materials, China National Light Industry, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Yongjian Xu
- Shaanxi Provincal Key Laboratory of Papermaking Technology and Specialty Paper Development, Key Laboratory of Paper-Based Functional Materials, China National Light Industry, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Hailong Xu
- Laboratory for Advanced Interfacial Materials and Devices, Research Center for Smart Wearable Technology, Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hong Kong SAR 999077, China
| | - Lei Dai
- Shaanxi Provincal Key Laboratory of Papermaking Technology and Specialty Paper Development, Key Laboratory of Paper-Based Functional Materials, China National Light Industry, National Demonstration Center for Experimental Light Chemistry Engineering Education, Shaanxi University of Science & Technology, Xi'an 710021, China
| | - Luo Kong
- School of Materials Science and Engineering, Shaanxi University of Science & Technology, Xi'an, Shaanxi 710021, China
| |
Collapse
|