High-Performance Metal-Organic Framework-Based Single Ion Conducting Solid-State Electrolytes for Low-Temperature Lithium Metal Batteries

Mechanisms of the Accelerated Li+ Conduction in MOF-Based Solid-State Polymer Electrolytes for All-Solid-State Lithium Metal Batteries

Solid polymer electrolytes (SPEs) for lithium metal batteries have garnered considerable interests owing to their low cost, flexibility, lightweight, and favorable interfacial compatibility with battery electrodes. Their soft mechanical nature compared to solid inorganic electrolytes give them a large advantage to be used in low pressure solid-state lithium metal batteries, which can avoid the cost and weight of the pressure cages. However, the application of SPEs is hindered by their relatively low ionic conductivity. In addressing this limitation, enormous efforts are devoted to the experimental investigation and theoretical calculations/simulation of new polymer classes. Recently, metal-organic frameworks (MOFs) have been shown to be effective in enhancing ion transport in SPEs. However, the mechanisms in enhancing Li+ conductivity have rarely been systematically and comprehensively analyzed. Therefore, this review provides an in-depth summary of the mechanisms of MOF-enhanced Li+ transport in MOF-based solid polymer electrolytes (MSPEs) in terms of polymer, MOF, MOF/polymer interface, and solid electrolyte interface aspects, respectively. Moreover, the understanding of Li+ conduction mechanisms through employing advanced characterization tools, theoretical calculations, and simulations are also reviewed in this review. Finally, the main challenges in developing MSPEs are deeply analyzed and the corresponding future research directions are also proposed.

A fluorinated metal-organic framework-based quasi-solid electrolyte for stabilizing Li metal anodes

A fluorinated quasi-solid electrolyte (QSE) with a high conductivity of 2.3 mS cm-1 is meticulously designed for Li metal batteries. It facilitates the formation of a LiF-rich solid electrolyte interface that effectively enhances the reversibility of Li anodes. The assembled Li|QSE|LiFePO4 batteries exhibit 92.3% capacity retention after 1500 cycles and an impressive capacity of up to 45 mA h g-1 at 20C.

5.1 µm Ion-Regulated Rigid Quasi-Solid Electrolyte Constructed by Bridging Fast Li-Ion Transfer Channels for Lithium Metal Batteries

An ultra-thin quasi-solid electrolyte (QSE) with dendrite-inhibiting properties is a requirement for achieving high energy density quasi-solid lithium metal batteries (LMBs). Here, a 5.1 µm rigid QSE layer is directly designed on the cathode, in which Kevlar (poly(p-phenylene terephthalate)) nanofibers (KANFs) with negatively charged groups bridging metal-organic framework (MOF) particles are served as a rigid skeleton, and non-flammable deep eutectic solvent is selected to be encapsulated into the MOF channels, combined with in situ polymerization to complete safe electrolyte system with high rigidness and stability. The QSE with constructed topological network demonstrates high rigidity (5.4 GPa), high ionic conductivity (0.73 mS cm-1 at room temperature), good ion-regulated properties, and improved structural stability, contributing to homogenized Li-ion flux, excellent dendrite suppression, and prolonged cyclic performance for LMB. Additionally, ion regulation influences the Li deposition behavior, exhibiting a uniform morphology on the Li-metal surface after cycling. According to density-functional theory, KANFs bridging MOFs as hosts play a vital function in the free-state and fast diffusion dynamics of Li-ions. This work provides an effective strategy for constructing ultrathin robust electrolytes with a novel ionic conduction mode.

Strategies to improve the ionic conductivity of quasi-solid-state electrolytes based on metal-organic frameworks

The low ionic conductivity of quasi-solid-state electrolytes (QSSEs) at ambient temperature is a barrier to the development of solid-state batteries (SSBs). Conversely, metal-organic frameworks (MOFs) with porous structure and metal sites show great potential for the fabrication of QSSEs. Numerous studies have proven that the structure and functional groups of MOFs could significantly impact the ionic conductivity of QSSEs based on MOFs (MOFs-QSSEs). This review introduces the transport mechanism of lithium ions in various MOFs-QSSEs, and then analyses how to construct an effective and consistent lithium ions pathway from the perspective of MOFs modification. It is shown that the ion conductivity could be enhanced by modifying the morphology and functional groups, as well as applying amorphous MOFs. Lastly, some issues and future perspectives for MOFs-QSSEs are examined. The primary objective of this review is to enhance the comprehension of the mechanisms and performance optimization methods of MOFs-QSSEs. Consequently, this would guide the design and synthesis of QSSEs with high ionic conductivity, and ultimately enhance the performance of commercial SSBs.

Recent progress and perspectives on metal-organic frameworks as solid-state electrolytes for lithium batteries

Solid-state electrolytes (SSEs) are the key materials in the new generation of all-solid-state lithium ion/metal batteries. Metal-organic frameworks (MOFs) are ideal materials for developing solid electrolytes because of their structural diversity and porous properties. However, there are several significant issues and obstacles involved, such as lower ion conductivity, a smaller ion transport number, a narrower electrochemical stability window and poor interface contact. In this review, a comprehensive analysis and summary of the unique ion-conducting behavior of MOF-based electrolytes in rechargeable batteries are presented, and the different design principles of MOF-based SSEs are classified and emphasized. Accordingly, four design principles for achieving these MOF-based SSEs are presented and the influence of SSEs combined with MOFs on the electrochemical performance of the batteries is described. Finally, the challenges in the application of MOF materials in lithium ion/metal batteries are explored, and directions for future research on MOF-based electrolytes are proposed. This review will deepen the understanding of MOF-based electrolytes and promote the development of high-performance solid-state lithium ion/metal batteries. This review not only provides theoretical guidance for research on new MOF-based SSE systems, but also contributes to further development of MOFs applied to rechargeable batteries.

A Star-Structured Polymer Electrolyte for Low-Temperature Solid-State Lithium Batteries

Solid-state polymer lithium metal batteries (SSLMBs) have attracted considerable attention because of their excellent safety and high energy density. However, the application of SSLMBs is significantly impeded by uneven Li deposition at the interface between solid-state electrolytes and lithium metal anode, especially at a low temperature. Herein, this issue is addressed by designing an agarose-based solid polymer electrolyte containing branched structure. The star-structured polymer is synthesized by grafting poly (ethylene glycol) monomethyl-ether methacrylate and lithium 2-acrylamido-2-methylpropanesulfonate onto tannic acid. The star structure regulates Li-ion flux in the bulk of the electrolyte and at the electrolyte/electrode interfaces. This unique omnidirectional Li-ion transportation effectively improves ionic conductivity, facilitates a uniform Li-ion flux, inhibits Li dendrite growth, and alleviates polarization. As a result, a solid-state LiFePO4||Li battery with the electrolyte exhibits outstanding cyclability with a specific capacity of 134 mAh g-1 at 0.5C after 800 cycles. The battery shows a high discharge capacity of 145 mAh g-1 at 0.1 C after 200 cycles, even at 0 °C. The study offers a promising strategy to address the uneven Li deposition at the solid-state electrolyte/electrode interface, which has potential applications in long-life solid-state lithium metal batteries at a low temperature.

Molecular Engineering toward Robust Solid Electrolyte Interphase for Lithium Metal Batteries

Lithium-metal batteries (LMBs) with high energy density are becoming increasingly important in global sustainability initiatives. However, uncontrollable dendrite seeds, inscrutable interfacial chemistry, and repetitively formed solid electrolyte interphase (SEI) have severely hindered the advancement of LMBs. Organic molecules have been ingeniously engineered to construct targeted SEI and effectively minimize the above issues. In this review, multiple organic molecules, including polymer, fluorinated molecules, and organosulfur, are comprehensively summarized and insights into how to construct the corresponding elastic, fluorine-rich, and organosulfur-containing SEIs are provided. A variety of meticulously selected cases are analyzed in depth to support the arguments of molecular design in SEI. Specifically, the evolution of organic molecules-derived SEI is discussed and corresponding design principles are proposed, which are beneficial in guiding researchers to understand and architect SEI based on organic molecules. This review provides a design guideline for constructing organic molecule-derived SEI and will inspire more researchers to concentrate on the exploitation of LMBs.

Engineering the d-Orbital Energy of Metal-Organic Frameworks-Based Solid-State Electrolytes for Lithium-Metal Batteries

Having an orbital-level understanding of the relationship between the electronic state of a central metal in metal-organic frameworks (MOFs) as solid-state electrolytes (SSEs) and Li+ ion conductivity is crucial yet challenging for lithium-metal batteries (LMBs). In this study, we report the synthesis of functionalized UiO-66 as a model system to investigate the relationship between the d-band energy of Zr 3d orbitals and Li+ ion conductivity. Specifically, the NO2 group in electron-withdrawing NO2-decorated UiO-66 (NO2-UiO-66) can capture electron from ZrO8 sites, resulting the increased energy in 3dz2 and 3dxz/yz orbitals of Zr atom. The high-energy 3dz2 and 3dxz/yz orbitals of Zr in NO2-UiO-66 hybridize with the 2pz and 2px/y orbitals of O in ClO4-, leading to decreased antibonding orbital energy and resulting in a strong adsorption, ultimately immobilizing the anions and enhancing ion conductivities. Establishing the correlation between the d-orbital energy and Li+ ion conductivity may create a descriptor for designing efficient SSEs for LMBs.

Janus Quasi-Solid Electrolyte Membranes with Asymmetric Porous Structure for High-Performance Lithium-Metal Batteries

Quasi-solid electrolytes (QSEs) based on nanoporous materials are promising candidates to construct high-performance Li-metal batteries (LMBs). However, simultaneously boosting the ionic conductivity (σ) and lithium-ion transference number (t+) of liquid electrolyte confined in porous matrix remains challenging. Herein, we report a novel Janus MOFLi/MSLi QSEs with asymmetric porous structure to inherit the benefits of both mesoporous and microporous hosts. This Janus QSE composed of mesoporous silica and microporous MOF exhibits a neat Li+ conductivity of 1.5 × 10-4 S cm-1 with t+ of 0.71. A partially de-solvated structure and preference distribution of Li+ near the Lewis base O atoms were depicted by MD simulations. Meanwhile, the nanoporous structure enabled efficient ion flux regulation, promoting the homogenous deposition of Li+. When incorporated in Li||Cu cells, the MOFLi/MSLi QSEs demonstrated a high Coulombic efficiency of 98.1%, surpassing that of liquid electrolytes (96.3%). Additionally, NCM 622||Li batteries equipped with MOFLi/MSLi QSEs exhibited promising rate performance and could operate stably for over 200 cycles at 1 C. These results highlight the potential of Janus MOFLi/MSLi QSEs as promising candidates for next-generation LMBs.

A mini review of current studies on metal-organic frameworks-incorporated composite solid polymer electrolytes in all-solid-state lithium batteries

All-solid-state lithium batteries (ASSLBs) using solid polymer electrolytes (SPEs) are believed to be future next-generation batteries aiming to replace high-risk traditional batteries using liquid electrolytes, which have a wide application range in portable electronic devices, portable power supplies, and especially in electric vehicles. Moreover, the appearance of SPEs can overcome the electrolyte leakage and flammability problems in conventional lithium-ion batteries. Nevertheless, ASSLBs still face some limitations due to the low ionic conductivity of solid-state electrolytes (SSEs) at room temperature and the poor contact electrode/electrolyte interface, which can be solved by suitable strategies. Currently, the research strategies of metal-organic frameworks that can be incorporated into solid polymer electrolytes offer a remarkable method for producing uniform solid polymer electrolytes that have good electrode/electrolyte contact interfaces and high ionic conductivity. Herein, the updates of current studies about metal-organic framework-incorporated composite solid polymer electrolytes are discussed in this mini-review.

A Metal-Organic Framework Based Quasi-Solid-State Electrolyte Enabling Continuous Ion Transport for High-Safety and High-Energy-Density Lithium Metal Batteries

Solid-state lithium metal batteries are promising next-generation rechargeable energy storage systems. However, the poor compatibility of the electrode/electrolyte interface and the low lithium ion conductivity of solid-state electrolytes are key issues hindering the practicality of solid-state electrolytes. Herein, rational designed metal-organic frameworks (MOFs) with the incorporation of two types of ionic liquids (ILs) are fabricated as quasi-solid electrolytes. The obtained MOF-IL electrolytes offer continuous ion transport channels with the functional sulfonic acid groups serving as lithium ion hopping sites, which accelerate the Li⁺ transport both in the bulk and at the interfaces. The quasi-solid MOF-IL electrolytes exhibit competitive ionic conductivities of over 3.0 × 10^-4 S cm^-1 at room temperature, wide electrochemical windows over 5.2 V, and good interfacial compatibility, together with greatly enhanced Li⁺ transference numbers compared to the bare IL electrolyte. Consequently, the assembled quasi-solid Li metal batteries show either superior stability at low C rates or improved rate performance, related to the species of ILs. Overall, the quasi-solid MOF-IL electrolytes possess great application potential in high-safety and high-energy-density lithium metal batteries.

Polyoxometalate-based frameworks for photocatalysis and photothermal catalysis

Polyoxometalate-based frameworks (POM-based frameworks) are extended structures assembled from metal-oxide cluster units and organic frameworks that simultaneously possess the virtues of POMs and frameworks. They have been attracting immense attention because of their diverse architectures and charming topologies and also due to their probable application prospects in the areas of catalysis, separation, and energy storage. In this review, the recent progress in POM-based frameworks including POM-based metal organic frameworks (PMOFs), POM-based covalent organic frameworks (PCOFs), and POM-based supramolecular frameworks (PSFs) is systematically summarized. The design and construction of a POM-based framework and its application in photocatalysis and photothermal catalysis are introduced, respectively. Finally, our brief outlooks on the current challenges and future development of POM-based frameworks for photocatalysis and photothermal catalysis are provided.

Hollow-Particles Quasi-Solid-State Electrolytes with Biomimetic Ion Channels for High-Performance Lithium-Metal Batteries

Solid-state electrolytes (SSEs) are the core material of solid-state lithium metal batteries (SLMBs), which are being researched urgently owing to their high energy and safety. Both high ionic conductivity and excellent cycling stability remain the primary goal of solid-state electrolytes. Herein, inspired by K⁺ /Na⁺ ion channels in cell membrane of eukaryotes, a novel hollow UiO-66 with biomimetic ion channels based on quasi-solid-state electrolytes (QSSEs) is designed. The hollow UiO-66 spheres containing biomimetic ion channels can spontaneously combine anions and incorporate more lithium ions, creating improved ionic conductivity (1.15 × 10^-3 S cm^-1 ) and lithium-ion transference number (0.70) at room temperature. The long-term cycling of symmetric batteries and COMSOL simulations demonstrate that this biomimetic strategy enables uniform ion flux to suppress Li dendrites. Furthermore, the Li metal full cells paired with LiFePO₄ cathode exhibit excellent cycling stability and rate performance. Consequently, the strategy of designing biomimetic QSSEs opens up a new path for developing high-performance electrolytes for SLMBs.

MOFs Containing Solid-State Electrolytes for Batteries

The use of metal-organic frameworks (MOFs) in solid-state electrolytes (SSEs) has been a very attractive research area that has received widespread attention in the modern world. SSEs can be divided into different types, some of which can be combined with MOFs to improve the electrochemical performance of the batteries by taking advantage of the high surface area and high porosity of MOFs. However, it also faces many serious problems and challenges. In this review, different types of SSEs are classified and the changes in these electrolytes after the addition of MOFs are described. Afterward, these SSEs with MOFs attached are introduced for different types of battery applications and the effects of these SSEs combined with MOFs on the electrochemical performance of the cells are described. Finally, some challenges faced by MOFs materials in batteries applications are presented, then some solutions to the problems and development expectations of MOFs are given.

A Multifunctional Interphase Layer Enabling Superior Sodium-Metal Batteries under Ambient Temperature and -40 °C

The sodium (Na)-metal anode with high theoretical capacity and low cost is promising for construction of high-energy-density metal batteries. However, the unsatisfactory interface between Na and the liquid electrolyte induces tardy ion transfer kinetics and dendritic Na growth, especially at ultralow temperature (-40 °C). Herein, an artificial heterogeneous interphase consisting of disodium selenide (Na₂ Se) and metal vanadium (V) is produced on the surface of Na (Na@Na₂ Se/V) via an in situ spontaneous chemical reaction. Such interphase layer possesses high sodiophilicity, excellent ionic conductivity, and high Young's modulus, which can promote Na-ion adsorption and transport, realizing homogenous Na deposition without dendrites. The symmetric Na@Na₂ Se/V cell exhibits outstanding cycling life span of over 1790 h (0.5 mA cm^-2 /1 mAh cm^-2 ) in carbonate-based electrolyte. More remarkably, ab initio molecular dynamics simulations reveal that the artificial Na₂ Se/V hybrid interphase can accelerate the desolvation of solvated Na⁺ at -40 °C. The Na@Na₂ Se/V electrode thus exhibits exceptional electrochemical performance in symmetric cell (over 1500 h at 0.5 mA cm^-2 /0.5 mAh cm^-2 ) and full cell (over 700 cycles at 0.5 C) at -40 °C. This work provides an avenue to design artificial heterogeneous interphase layers for superior high-energy-density metal batteries at ambient and ultralow temperatures.

Opportunities of Flexible and Portable Electrochemical Devices for Energy Storage: Expanding the Spotlight onto Semi-solid/Solid Electrolytes

The ever-increasing demand for flexible and portable electronics has stimulated research and development in building advanced electrochemical energy devices which are lightweight, ultrathin, small in size, bendable, foldable, knittable, wearable, and/or stretchable. In such flexible and portable devices, semi-solid/solid electrolytes besides anodes and cathodes are the necessary components determining the energy/power performances. By serving as the ion transport channels, such semi-solid/solid electrolytes may be beneficial to resolving the issues of leakage, electrode corrosion, and metal electrode dendrite growth. In this paper, the fundamentals of semi-solid/solid electrolytes (e.g., chemical composition, ionic conductivity, electrochemical window, mechanical strength, thermal stability, and other attractive features), the electrode-electrolyte interfacial properties, and their relationships with the performance of various energy devices (e.g., supercapacitors, secondary ion batteries, metal-sulfur batteries, and metal-air batteries) are comprehensively reviewed in terms of materials synthesis and/or characterization, functional mechanisms, and device assembling for performance validation. The most recent advancements in improving the performance of electrochemical energy devices are summarized with focuses on analyzing the existing technical challenges (e.g., solid electrolyte interphase formation, metal electrode dendrite growth, polysulfide shuttle issue, electrolyte instability in half-open battery structure) and the strategies for overcoming these challenges through modification of semi-solid/solid electrolyte materials. Several possible directions for future research and development are proposed for going beyond existing technological bottlenecks and achieving desirable flexible and portable electrochemical energy devices to fulfill their practical applications. It is expected that this review may provide the readers with a comprehensive cross-technology understanding of the semi-solid/solid electrolytes for facilitating their current and future researches on the flexible and portable electrochemical energy devices.

Bifunctional MOF Doped PEO Composite Electrolyte for Long-Life Cycle Solid Lithium Ion Battery

A highly stable composite electrolyte was developed in this research to address the performance decline over time in a solid lithium ion battery (SLIB). It involved the synthesis of bifunctional MOF material (MOF-2) from two different functionalized UiO-66 materials containing carboxyl groups and amine groups, respectively, and the subsequent blending of PEO (polyethylene oxide) with the MOF-2 to form the novel composite solid electrolyte (PEO-MOF-2). The composite electrolytes showed higher ionic conductivity (5.20 × 10^-4 S/cm) than that of pristine PEO. The LiFePO₄||Li cells constructed with PEO-MOF-2 exhibited 98.45% capacity retention with 149.92 mA h/g after 100 cycles operation at 1.0 C, which was higher than those cells prepared with pristine PEO electrolyte or with PEO-based electrolytes that were only doped by aminated MOF or carboxylated MOF. Furthermore, our experiments showed that there was about a 40% increase in the potential window (from 3.5 to 5.0 V) and 80% increase in the lithium ion transfer number (from 0.20 to 0.36 at 60 °C) as a result of replacing pristine PEO electrolyte with PEO-MOF-2.

A Silica-Reinforced Composite Electrolyte with Greatly Enhanced Interfacial Lithium-Ion Transfer Kinetics for High-Performance Lithium Metal Batteries

Developing quasi-solid-state electrolytes with superior ionic conductivity and high mechanical strength is urgently desired to improve the safety and cycling stability of lithium-metal batteries. Herein, a novel solid-like electrolyte (SLE) with enhanced Li⁺ interfacial transfer kinetics is rationally designed by soaking bulk nanostructured silica-polymer composites in liquid electrolytes. Benefiting from the high content of inorganic silica and abundant interfaces for fast Li⁺ -transport channels, the prepared SLE exhibits superb ionic conductivity and high mechanical strength. Furthermore, fumed silica with a high specific area in the SLE can homogenize Li⁺ flux and electrical field gradient. More importantly, a Li₂ S-rich solid electrolyte interphase (SEI) is constructed on the lithium metal due to the intimate ion coordination in the SLE. Therefore, the lithium-metal anode exhibits excellent electrochemical performance in symmetric Li-Li cells due to the merits of superior ionic conductivity, high modulus, Li₂ S-rich SEI, as well as the homogeneous Li⁺ flux. Full cells with LiFePO₄ cathode can still display a capacity retention of 98% at 0.2 C after 400 cycles. The proposed strategy on quasi-solid-state electrolytes provides a promising avenue for next-generation metal-based batteries.

Anti-Freezing Strategies of Electrolyte and their Application in Electrochemical Energy Devices

Wider scenes of human's activities under low temperature demand promising performance of anti-freezing electrochemical energy devices, and the promotion of performance is mainly limited by electrolyte. However, despite many relevant research works reported, there are still few reviews that systematically and comprehensively summarize these modified approaches and applications. In this focus review, we classify the prominent anti-freezing strategies as high concentration aqueous electrolyte, organic additives, organic electrolyte and others. Relevant research works have been put to clarify their anti-freezing mechanisms and exhibit the modification effects. Besides, various energy devices including metal-air batteries, non-gas batteries and supercapacitors which employed aforementioned strategies are discussed and their key low-temperature performance indexes are summarized to exhibit the advanced research progress. Finally, we put forward some remaining challenges of these modification strategies toward practical application and propose prospects on future development of low-temperature electrochemical energy devices.

Critical Review on Low-Temperature Li-Ion/Metal Batteries

With the highest energy density ever among all sorts of commercialized rechargeable batteries, Li-ion batteries (LIBs) have stimulated an upsurge utilization in 3C devices, electric vehicles, and stationary energy-storage systems. However, a high performance of commercial LIBs based on ethylene carbonate electrolytes and graphite anodes can only be achieved at above -20 °C, which restricts their applications in harsh environments. Here, a comprehensive research progress and in-depth understanding of the critical factors leading to the poor low-temperature performance of LIBs is provided; the distinctive challenges on the anodes, electrolytes, cathodes, and electrolyte-electrodes interphases are sorted out, with a special focus on Li-ion transport mechanism therein. Finally, promising strategies and solutions for improving low-temperature performance are highlighted to maximize the working-temperature range of the next-generation high-energy Li-ion/metal batteries.

Polypropylene (PP) supported Solid Polymer Electrolyte enables high-stable Organic lithium battery at low temperature

We innovatively used Polypropylene (PP) separator as a substrate, PEO-LiTFSI-SN as a paste to coat on both of the PP surfaces and formed sandwich-like solid polymer electrolytes (SPEs). The SPEs...

Metal–organic framework-based solid-state electrolytes for all solid-state lithium metal batteries: a review

This work systematically reviewed recent progress of MOF-based solid electrolytes in all solid-state metal batteries which has rarely been summarized.

Hf-based UiO-66-type solid electrolytes for all-solid-state lithium batteries

Solid electrolytes composed of Hf-based metal–organic frameworks (MOFs) were synthesized with excellent cycling stabilities. Their ionic conductivities were up to 2.82 × 10−3 S cm−1 at room temperature.

Polyphenylene Sulfide-Based Solid-State Separator for Limited Li Metal Battery

The urgent need for high energy batteries is pushing the battery studies toward the Li metal and solid-state direction, and the most central question is finding proper solid-state electrolyte (SSE). So far, the recently studied electrolytes have obvious advantages and fatal weaknesses, resulting in indecisive plans for industrial production. In this work, a thin and dense lithiated polyphenylene sulfide-based solid state separator (PPS-SSS) prepared by a solvent-free process in pilot stage is proposed. Moreover, the PPS surface is functionalized to immobilize the anions, increasing the Li⁺ transference number to 0.8-0.9, and widening the electrochemical potential window (EPW > 5.1 V). At 25 °C, the PPS-SSS exhibits high intrinsic Li⁺ diffusion coefficient and ionic conductivity (>10^-4 S cm^-1 ), and Li⁺ transport rectifying effect, resulting in homogenous Li-plating on Cu at 2 mA cm^-2 density. Based on the limited Li-plated Cu anode or anode-free Cu, high loadings cathode and high voltage, the Li-metal batteries (LMBs) with polyethylene (PE) protected PPS-SSSs deliver high energy and power densities (>1000 Wh L^-1 and 900 W L^-1 ) with >200 cycling life and high safety, exceeding those of state-of-the-art Li-ion batteries. The results promote the Li metal battery toward practicality.

High-Performance Room Temperature Lithium-Ion Battery Solid Polymer Electrolytes Based on Poly(vinylidene fluoride-co-hexafluoropropylene) Combining Ionic Liquid and Zeolite

The demand for more efficient energy storage devices has led to the exponential growth of lithium-ion batteries. To overcome the limitations of these systems in terms of safety and to reduce environmental impact, solid-state technology emerges as a suitable approach. This work reports on a three-component solid polymer electrolyte system based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), the ionic liquid 1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN]), and clinoptilolite zeolite (CPT). The influences of the preparation method and of the dopants on the electrolyte stability, ionic conductivity, and battery performance were studied. The developed electrolytes show an improved room temperature ionic conductivity (1.9 × 10^-4 S cm^-1), thermal stability (up to 300 °C), and mechanical stability. The corresponding batteries exhibit an outstanding room temperature performance of 160.3 mAh g^-1 at a C/15-rate, with a capacity retention of 76% after 50 cycles. These results represent a step forward in a promising technology aiming the widespread implementation of solid-state batteries.

High-Performance Room Temperature Lithium-Ion Battery Solid Polymer Electrolytes Based on Poly(vinylidene fluoride-co-hexafluoropropylene) Combining Ionic Liquid and Zeolite

The demand for more efficient energy storage devices has led to the exponential growth of lithium-ion batteries. To overcome the limitations of these systems in terms of safety and to reduce environmental impact, solid-state technology emerges as a suitable approach. This work reports on a three-component solid polymer electrolyte system based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), the ionic liquid 1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN]), and clinoptilolite zeolite (CPT). The influences of the preparation method and of the dopants on the electrolyte stability, ionic conductivity, and battery performance were studied. The developed electrolytes show an improved room temperature ionic conductivity (1.9 × 10^-4 S cm^-1), thermal stability (up to 300 °C), and mechanical stability. The corresponding batteries exhibit an outstanding room temperature performance of 160.3 mAh g^-1 at a C/15-rate, with a capacity retention of 76% after 50 cycles. These results represent a step forward in a promising technology aiming the widespread implementation of solid-state batteries.

Electrolyte Design for Lithium Metal Anode-Based Batteries Toward Extreme Temperature Application

Lithium anode-based batteries (LBs) are highly demanded in society owing to the high theoretical capacity and low reduction potential of metallic lithium. They are expected to see increasing deployment in performance critical areas including electric vehicles, grid storage, space, and sea vehicle operations. Unfortunately, competitive performance cannot be achieved when LBs operating under extreme temperature conditions where the lithium-ion chemistry fail to perform optimally. In this review, a brief overview of the challenges in developing LBs for low temperature (<0 °C) and high temperature (>60 °C) operation are provided followed by electrolyte design strategies involving Li salt modification, solvation structure optimization, additive introduction, and solid-state electrolyte utilization for LBs are introduced. Specifically, the prospects of using lithium metal batteries (LMBs), lithium sulfur (Li-S) batteries, and lithium oxygen (Li-O2 ) batteries for performance under low and high temperature applications are evaluated. These three chemistries are presented as prototypical examples of how the conventional low temperature charge transfer resistances and high temperature side reactions can be overcome. This review also points out the research direction of extreme temperature electrolyte design toward practical applications.

Single-Atom Zinc and Anionic Framework as Janus Separator Coatings for Efficient Inhibition of Lithium Dendrites and Shuttle Effect

The two key problems for the industrialization of Li-S batteries are the dendrite growth of lithium anode and the shuttle effect of lithium polysulfides (LiPSs). Herein, we report the Janus separator prepared by coating anionic Bio-MOF-100 and its derived single-atom zinc catalyst on each side of the Celgard separator. The anionic metal-organic framework (MOF) coating induces the uniform and rapid deposition of lithium ions, while its derived single-atom zinc catalyzes the rapid transformation of LiPSs, thus inhibiting the lithium dendrite and shuttle effect simultaneously. Consequently, compared with other reported Li-S batteries assembled with single-atomic catalysts as separator coatings, our SAZ-AF Janus separator showed stable cyclic performance (0.05% capacity decay rate at 2 C with 1000 cycles), outstanding performance in protecting lithium anode (steady cycle 2800 h at 10 mAh cm^-2), and equally excellent cycling performance in Li-SeS₂ or Li-Se batteries. Our work provides an effective separator coating design to inhibit shuttle effect and lithium dendrite.

Metal-Organic Framework-Supported Poly(ethylene oxide) Composite Gel Polymer Electrolytes for High-Performance Lithium/Sodium Metal Batteries

Thanks to their high energy density, lithium/sodium metal batteries (LMBs/SMBs) are considered to be the most promising next-generation energy storage system. However, the instability of the electrode/electrolyte interface and dendrite growth seriously hinders commercial application of LMBs/SMBs. In addition, traditional liquid electrolytes are inflammable and explosive. As a key part of the battery, the electrolyte plays an important role in solving the abovementioned problems. Although solid electrolytes can alleviate dendrite growth and liquid electrolyte leakage, their low ionic conductivity and poor interfacial contact are not conducive to improvement of overall LMBs/SMB performances. Therefore, it is necessary to find a balance between liquid and solid electrolytes. Gel polymer electrolytes (GPEs) are one means for achieving high-performance LMBs/SMBs because they combine the advantages of liquid and solid electrolytes. Metal-organic frameworks (MOFs) benefit from high specific surface areas, ordered internal porous structures, organic-inorganic hybrid properties, and show great potential in modified electrolytes. Here, Cu-based MOF-supported poly(ethylene oxide) composite gel polymer electrolytes (CGPEs) were prepared by ultraviolet curing. This CGPE exhibited high ionic conductivity, a wide electrochemical window, and a high ion transference number. In addition, it also exhibited excellent cycle stability in symmetric batteries and LMBs/SMBs. This study showed that CGPE had great practical application potential in the next-generation LMBs/SMBs.

Two Carboxyl-Decorated Anionic Metal-Organic Frameworks as Solid-State Electrolytes Exhibiting High Li+ and Zn2+ Conductivity

A highly electronegative carboxyl-decorated anionic metal-organic framework (MOF), (Me₂NH₂)₂[In₂(THBA)₂](CH₃CN)₉(H₂O)₂₁ (InOF; H₄THBA = [1,1':4',1″-terphenyl]-2',3,3″,5,5',5″-hexacarboxylic acid), with high-density electronegative functional sites was designed and constructed. One unit cell of InOF possesses 12 negative sites that originate from the negatively charged secondary building unit [In(COO)₄]^- and exposed carboxyl groups on the ligand. The abundant electronegative sites can facilitate the hopping of ions in channels and thus result in highly efficient ion conductivities for various metal ions. Our results show that Li⁺-loaded materials have a remarkably high ion conductivity of 1.49 × 10^-3 S/cm, an ion transference number of 0.78, and a relatively low activation energy of 0.19 eV. The Na⁺, K⁺, and Zn²⁺ ion conductivities of InOF are 7.97 × 10^-4, 7.69 × 10^-4, and 1.22 × 10^-3 S/cm at 25 °C, respectively.

Ionic Liquid (IL) Laden Metal-Organic Framework (IL-MOF) Electrolyte for Quasi-Solid-State Sodium Batteries

An ionic liquid (IL) laden metal-organic framework (MOF) sodium-ion electrolyte has been developed for ambient-temperature quasi-solid-state sodium batteries. The MOF skeleton is designed according to a UIO-66 (Universitetet i Oslo) structure. A sodium sulfonic (-SO₃Na) group grafted to the UIO-based MOF ligand improves the Na⁺-ion conductivity. Upon lading with a sodium-based ionic liquid (Na-IL), sodium bis(trifluoromethylsulfonyl)imide (NaTFSI) in 1-n-butyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide (Bmpyr-TFSI), the Na-IL laden sulfonated UIO-66 (UIOSNa) quasi-solid electrolyte exhibits a Na⁺-ion conductivity of 3.6 × 10^-4 S cm^-1 at ambient temperature. Quasi-solid-state sodium batteries with the Na-IL/UIOSNa electrolyte are demonstrated with a layered Na₃Ni_1.5TeO₆ cathode and sodium-metal anode. The quasi-solid-state Na∥Na-IL/UIOSNa∥Na₃Ni_1.5TeO₆ cells show remarkable cycling performance.

Recent advances in process engineering and upcoming applications of metal-organic frameworks

Progress in metal-organic frameworks (MOFs) has advanced from fundamental chemistry to engineering processes and applications, resulting in new industrial opportunities. The unique features of MOFs, such as their permanent porosity, high surface area, and structural flexibility, continue to draw industrial interest outside the traditional MOF field, both to solve existing challenges and to create new businesses. In this context, diverse research has been directed toward commercializing MOFs, but such studies have been performed according to a variety of individual goals. Therefore, there have been limited opportunities to share the challenges, goals, and findings with most of the MOF field. In this review, we examine the issues and demands for MOF commercialization and investigate recent advances in MOF process engineering and applications. Specifically, we discuss the criteria for MOF commercialization from the views of stability, producibility, regulations, and production cost. This review covers progress in the mass production and formation of MOFs along with future applications that are not currently well known but have high potential for new areas of MOF commercialization.

Recent Development of Mg Ion Solid Electrolyte

Although the successful deployment of lithium-ion batteries (LIBs) in various fields such as consumer electronics, electric vehicles and electric grid, the efforts are still ongoing to pursue the next-generation battery systems with higher energy densities. Interest has been increasing in the batteries relying on the multivalent-ions such as Mg²⁺, Zn²⁺, and Al³⁺, because of the higher volumetric energy densities than those of monovalent-ion batteries including LIBs and Na-ion batteries. Among them, magnesium batteries have attracted much attention due to the promising characteristics of Mg anode: a low redox potential (−2.356 V vs. SHE), a high volumetric energy density (3,833 mAh cm⁻³), atmospheric stability and the earth-abundance. However, the development of Mg batteries has progressed little since the first Mg-ion rechargeable battery was reported in 2000. A severe technological bottleneck concerns the organic electrolytes, which have limited compatibility with Mg anode and form an Mg-ion insulating passivation layer on the anode surface. Consequently, beneficial to the good chemical and mechanical stability, Mg-ion solid electrolyte should be a promising alternative to the liquid electrolyte. Herein, a mini review is presented to focus on the recent development of Mg-ion solid conductor. The performances and the limitations were also discussed in the review. We hope that the mini review could provide a quick grasp of the challenges in the area and inspire researchers to develop applicable solid electrolyte candidates for Mg batteries.

Two novel lead-based coordination polymers for luminescence sensing of anions, cations and small organic molecules

A novel lead-based compound is reported as a multi-responsive luminescent sensor for detecting anions, cations and small organic molecules, especially Cr₂O₇²⁻, CrO₄²⁻, Fe³⁺ and nitrobenzene.

Significantly enhancing the lithium-ion conductivity of solid-state electrolytes via a strategy for fabricating hollow metal–organic frameworks

A solid-state electrolyte based on hollow metal organic framework (MOF) materials was prepared. Due to its special hollow structure, the hollow MOF-based solid-state electrolyte exhibits superior ionic conductivity, which can store more lithium ions and transmits lithium ions by the wall of the cavity.