Bipyridinium-Based Ionic Covalent Triazine Frameworks for CO2, SO2, and NO Capture

Cost-Effective Synthesis of Carbazole-Based Nanoporous Organic Polymers for SO2 Capture

Sulfur dioxide (SO2), a pervasive air pollutant, poses significant environmental and health risks, necessitating advanced materials for its efficient capture. Nanoporous organic polymers (NOPs) have emerged as promising candidates; however, their development is often hindered by high synthesis temperatures, complex precursors, and limited SO2 selectivity. Herein, we report a room-temperature, cost-effective synthesis of carbazole-based nanoporous organic polymers (CNOPs) using 1,3,5-trioxane and paraldehyde, offering a significant advancement over traditional Friedel-Crafts alkylation methods. The resulting CNOPs exhibit a high surface area of up to 842 m2·g-1 and feature ultramicroporous structures optimized for SO2 adsorption. At 298 K and 1 bar, the CNOPs demonstrated SO2 adsorption capacities of up to 9.39 mmol·g-1. Ideal adsorbed solution theory (IAST) calculations revealed outstanding selectivities of 105 for SO2/CO2 and 6139 for SO2/N2 mixtures, supported by breakthrough experiments demonstrating superior separation performance. This work not only provides a straightforward synthetic route for CNOPs but also offers valuable insights into the design and development of porous materials tailored for enhanced SO2 capture, addressing critical environmental and health challenges.

Achieving Sub-ppm Sensitivity in SO2 Detection with a Chemically Stable Covalent Organic Framework

We report the inaugural experimental investigation of covalent organic frameworks (COFs) to address the formidable challenge of SO2 detection. Specifically, an imine-functionalized COF (SonoCOF-9) demonstrated a modest and reversible SO2 sorption of 3.5 mmol g-1 at 1 bar and 298 K. At 0.1 bar (and 298 K), the total SO2 uptake reached 0.91 mmol g-1 with excellent reversibility for at least 50 adsorption-desorption cycles. An isosteric enthalpy of adsorption (ΔHads) for SO2 equaled -42.3 kJ mol-1, indicating a relatively strong interaction of SO2 molecules with the COF material. Also, molecular dynamics simulations and Møller-Plesset perturbation theory calculations showed the interaction of SO2 with π density of the rings and lone pairs of the N atoms of SonoCOF-9. The combination of experimental data and theoretical calculations corroborated the potential use of this COF for the selective detection and sensing of SO2 at the sub-ppm level (0.0064 ppm of SO2).

Triple Templates Directed Synthesis of Nitrogen-Doped Hierarchically Porous Carbons from Pyridine Rich Monomer as Efficient and Reversible SO2 Adsorbents

Herein, a variety of 2,6-diaminopyridine (DAP) derived nitrogen-doped hierarchically porous carbon (DAP-NHPC-T) prepared from carbonization-induced structure transformation of DAP-Zn-SiO2-P123 nanocomposites are reported, which are facilely prepared from solvent-free co-assembly of block copolymer templates P123 with pyridine-rich monomer of DAP, Zn(NO3)2 and tetramethoxysilane. In the pyrolysis process, P123 and SiO2 templates promote the formation of mesoporous and supermicroporous structures in the DAP-NHPC-T, while high-temperature volatilization of Zn contributed to generation of micropores. The DAP-NHPC-T possess large BET surface areas (≈956-1126 m2 g-1), hierarchical porosity with micro-supermicro-mesoporous feature and high nitrogen contents (≈10.44-5.99 at%) with tunable density of pyridine-based nitrogen sites (≈5.99-3.32 at%), exhibiting good accessibility and reinforced interaction with SO2. Consequently, the DAP-NHPC-T show high SO2 capacity (14.7 mmol g-1, 25 °C and 1.0 bar) and SO2/CO2/N2 IAST selectivities, extraordinary dynamic breakthrough separation efficiency and cycling stability, far beyond any other reported nitrogen-doped metal-free carbon. As verified by in situ spectroscopy and theoretical calculations, the pyridine-based nitrogen sites of the DAP-NHPC-T boost SO2 adsorption via the unique charge transfer, the adsorption mechanism and reaction model have been finally clarified.

Engineering Nanoporous Polyaminal Networks for Superior SO2 Capture and Selectivity

Designing adsorbent materials with high SO2 adsorption capacities and selectivity remains a significant challenge in flue gas desulfurization. This work focuses on developing two nitrogen-rich nanoporous polyaminal networks (NPANs), which demonstrate promising capabilities for SO2 adsorption and separation. Two nitrogen-rich nanoporous polyaminal networks, NPAN-5 and NPAN-6, were synthesized via a one-pot method using thiophene-2,5-dicarbaldehyde and furan-2,5-dicarbaldehyde with 1,4-bis(2,4-diamino-1,3,5-triazine)-benzene, respectively. The Brunauer-Emmett-Teller (BET) specific surface areas of NPANs range from 838 to 956 m2·g-1. At 298 K and pressures of 0.1 and 1.0 bar, NPAN-5, featuring thiophene units, demonstrates a SO2 adsorption uptake of 5.14 and 9.63 mmol·g-1, respectively, surpassing many previously reported materials. Furthermore, at room temperature, NPAN-6, containing furan moieties, exhibits unprecedented selectivity for SO2 over CO2 and N2, with ratios reaching up to 78 and 9321, respectively. Dynamic breakthrough experiments reveal that NPANs effectively separate SO2 from a ternary gas mixture comprising SO2, CO2, and N2 at concentrations of 0.2, 10, and 89.8%, respectively. Notably, NPAN-6 achieves a prolonged SO2 retention time of 218 min·g-1 and a saturation adsorption uptake of 0.42 mmol·g-1. The remarkable SO2 adsorption capacities and selectivities demonstrated by these nitrogen-rich nanoporous polyaminal networks underscore their potential to revolutionize industrial flue gas desulfurization.

Highly Selective SO2 Capture by Triazine-Functionalized Triphenylamine-Based Nanoporous Organic Polymers

The emissions of sulfur dioxide (SO2) from combustion exhaust gases pose significant risks to public health and the environment due to their harmful effects. Therefore, the development of highly efficient adsorbent polymers capable of capturing SO2 with high capacity and selectivity has emerged as a critical challenge in recent years. However, existing polymers often exhibit poor SO2/CO2 and SO2/N2 selectivity. Herein, we report two triazine-functionalized triphenylamine-based nanoporous organic polymers (ANOP-6 and ANOP-7) that demonstrate both good SO2 uptake and high SO2/CO2 and SO2/N2 selectivity. These polymers were synthesized through cost-effective Friedel-Crafts reactions using cyanuric chloride, 3,6-diphenylaminecarbazole, and 2,2',7,7'-tetrakis(diphenylamino)-9,9'-spirobifluorene. The resultant ANOPs are composed of triazine and triphenylamine units and feature an ultramicroporous structure. Remarkably, ANOPs exhibit impressive adsorption capacities for SO2, with uptakes of approximately 3.31-3.72 mmol·g-1 at 0.1 bar, increasing to 9.52-9.94 mmol·g-1 at 1 bar. The static adsorption isotherms effectively illustrate the ability of ANOPs to separate SO2 from SO2/CO2 and SO2/N2 mixtures. At 298 K and 1 bar, ANOP-6 shows outstanding selectivity toward SO2/CO2 (248) and SO2/N2 (13146), surpassing all previously reported triazine-based nanoporous organic polymers. Additionally, dynamic breakthrough tests demonstrate the superior separation properties of ANOPs for SO2 from an SO2/CO2/N2 mixture. ANOPs exhibit a breakthrough time of 73.1 min·g-1 and a saturated SO2 capacity of 0.53 mmol·g-1. These results highlight the exceptional adsorption properties of ANOPs for SO2, indicating their promising potential for the highly efficient capture of SO2 from flue gas.

Unveiling the Role of Cationic Pyridine Sites in Covalent Triazine Framework for Boosting Zinc-Iodine Batteries Performance

Rechargeable Zinc-iodine batteries (ZIBs) are gaining attention as energy storage devices due to their high energy density, low-cost, and inherent safety. However, the poor cycling performance of these batteries always arises from the severe leakage and shuttle effect of polyiodides (I3 - and I5 -). Herein, a novel cationic pyridine-rich covalent triazine framework (CCTF-TPMB) is developed to capture and confine iodine (I2) species via strong electrostatic interaction, making it an attractive host for I2 in ZIBs. The as-fabricated ZIBs with I2 loaded CCTF-TPMB (I2@CCTF-TPMB) cathode achieve a large specific capacity of 243 mAh g-1 at 0.2 A g-1 and an exceptionally stable cyclic performance, retaining 93.9% of its capacity over 30 000 cycles at 5 A g-1. The excellent electrochemical performance of the ZIBs can be attributed to the pyridine-rich cationic sites of CCTF-TPMB, which effectively suppress the leakage and shuttle of polyiodides, while also accelerating the conversion reaction of I2 species. Combined in situ Raman and UV-vis analysis, along with theoretical calculations, clearly reveal the critical role played by pyridine-rich cationic sites in boosting the ZIBs performances. This work opens up a promising pathway for designing advanced I2 cathode materials toward next-generation ZIBs and beyond.

Low-Hysteresis and High-Toughness Hydrogels Regulated by Porous Cationic Polymers: the Effect of Counteranions

Service life and range of polymer materials is heavily reliant on their elasticity and mechanical stability under long-term loading. Slippage of chain segments under load leads to significant hysteresis of the hydrogels, limiting its repeatability and mechanical stability. Achieving the desired elasticity exceeding that of rubber is a great challenge for hydrogels, particularly when subjected to large deformations. Here, low-hysteresis and high-toughness hydrogels were developed through controllable interactions of porous cationic polymers (PCPs) with adjustable counteranions, including reversible bonding of PCP frameworks/polymer segments (polyacrylamide, PAAm) and counteranions/PAAm. This strategy reduces chain segment slippage under load, endowing the PCP-based hydrogels (PCP-gels) with good elasticity under large deformations (7 % hysteresis at a strain ratio of 40). Furthermore, due to the enlarged chain segments entanglement by PCP, the PCP-gels exhibit large strain (13000 %), significantly enhanced toughness (68 MJ m-3 ), high fracture energy (43.1 kJ m-2 ), and fatigue resistance. The unique properties of these elastic PCP-gels have promising applications in the field of flexible sensors.

Hexaazatrinaphthalene-Based Covalent Triazine Framework-Supported Rhodium(III) Complex: A Recyclable Heterogeneous Catalyst for the Reductive Amination of Ketones to Primary Amines

The development of efficient and recyclable heterogeneous catalysts is an important topic. Herein, a rhodium(III) complex Cp*Rh@HATN-CTF was synthesized by the coordinative immobilization of [Cp*RhCl₂]₂ on a hexaazatrinaphthalene-based covalent triazine framework. In the presence of Cp*Rh@HATN-CTF (1 mo l% Rh), a series of primary amines could be obtained via the reductive amination of ketones in high yields. Moreover, catalytic activity of Cp*Rh@HATN-CTF is well maintained during six runs. The present catalytic system was also applied for the large scale preparation of a biologically active compound. It would facilitate the development of CTF-supported transition metal catalysts for sustainable chemistry.

2D Covalent Organic Frameworks Based on Heteroacene Units

Covalent organic frameworks (COFs) are a unique new class of porous materials that arrange building units into periodic ordered frameworks through strong covalent bonds. Accompanied with structural rigidity and well-defined geometry, heteroacene-based COFs have natural advantages in constructing COFs with high stability and crystallinity. Heteroacene-based COFs usually have high physical and chemical properties, and their extended π-conjugation also leads to relatively low energy gap, effectively promoting π-electron delocalization between network units. Owing to excellent electron-withdrawing or -donating ability, heteroacene units have incomparable advantages in the preparation of donor-acceptor type COFs. Therefore, the physicochemical robust and fully conjugated heteroacene-based COFs solve the problem of traditional COFs lacking π-π interaction and chemical stability. In recent years, significant breakthroughs are made in this field, the choice of various linking modes and building blocks has fundamentally ensured the final applications of COFs. It is of great significance to summarize the heteroacene-based COFs for improving its complexity and controllability. This review first introduces the linkages in heteroacene-based COFs, including reversible and irreversible linkages. Subsequently, some representative building blocks are summarized, and their related applications are especially emphasized. Finally, conclusion and perspectives for future research on heteroacene-based COFs are presented.

Stable Porous Organic Polymers Used for Reversible Adsorption and Efficient Separation of Trace SO2

The development of porous solid adsorbents for selective adsorption and separation of SO₂ has attracted much attention recently. Herein, we design porous organic polymers (POPs) decorated with pyridine ligands as building units (POP-Py) through a radical polymerization of the 2,5-divinylpyridine (v-Py) monomer. Due to its high BET surface area, nanoporosity, and excellent stability, the prepared POP-Py can be used for reversible adsorption and efficient separation of SO₂. The POP-Py possesses a SO₂ capacity of 10.8 mmol g^-1 at 298 K and 1.0 bar, which can be well retained after 6 recycles, showing an excellent reversible adsorption capacity. The POP-Py also shows superior separation performance for SO₂ from a ternary SO₂/CO₂/N₂ mixture (0.17/15/84.83v%), giving a breakthrough time and a saturated SO₂ capacity at 178 min g^-1 and 0.4 mmol g^-1. The retention time was well maintained even under high moisture conditions, confirming its superior water resistance. Furthermore, when other vinyl-functionalized organic ligand monomers (bipyridine, pyrimidine, and pyrazine) were employed for radical polymerization, all of the resultant porous organic ligand polymers (POP-BPy, POP-PyI, and POP-PyA) exhibited superior performance for reversible adsorption and efficient separation of SO₂. The combined features of reversible adsorption, efficient separation, and water resistance are important for the industrial applications of these materials as SO₂ adsorbents.

Graphitic Aza-Fused π-Conjugated Networks: Construction, Engineering, and Task-Specific Applications

2D π-conjugated networks linked by aza-fused units represent a pivotal category of graphitic materials with stacked nanosheet architectures. Extensive efforts have been directed at their fabrication and application since the discovery of covalent triazine frameworks (CTFs). Besides the triazine cores, tricycloquinazoline and hexaazatriphenylene linkages are further introduced to tailor the structures and properties. Diverse related materials have been developed rapidly, and a thorough outlook is necessitated to unveil the structure-property-application relationships across multiple subcategories, which is pivotal to guide the design and fabrication toward enhanced task-specific performance. Herein, the structure types and development of related materials including CTFs, covalent quinazoline networks, and hexaazatriphenylene networks, are introduced. Advanced synthetic strategies coupled with characterization techniques provide powerful tools to engineer the properties and tune the associated behaviors in corresponding applications. Case studies in the areas of gas adsorption, membrane-based separation, thermo-/electro-/photocatalysis, and energy storage are then addressed, focusing on the correlation between structure/property engineering and optimization of the corresponding performance, particularly the preferred features and strategies in each specific field. In the last section, the underlying challenges and opportunities in construction and application of this emerging and promising material category are discussed.

2D and 3D Covalent Organic Frameworks: Cutting-Edge Applications in Biomedical Sciences

Covalent organic frameworks (COFs) are crystalline porous organic structures with two- or three-dimensional (2D or 3D) features and composed of building blocks being connected via covalent bonds. The manifold applications of COFs in optoelectronic devices, energy conversion and storage, adsorption, separation, sensing, organocatalysis, photocatalysis, electrocatalytic reactions, and biomedicine are increasing because of their notable intrinsic features such as large surface area, porosity, designable structure, low density, crystallinity, biocompatibility, and high chemical stability. These properties have rendered 2D and 3D COF-based materials as desirable entities for drug delivery, gene delivery, photothermal therapy, photodynamic therapy, combination therapy, biosensing, bioimaging, and anticancer activities. Herein, different reactions and methods for the synthesis of 2D and 3D COFs are reviewed with special emphasis on the construction and state-of-the-art progress pertaining to the biomedical applications of 2D and 3D COFs of varying shapes, sizes, and structures. Specifically, stimuli-responsive COFs-based systems and targeted drug delivery approaches are summarized.

Covalent triazine frameworks for the dynamic adsorption/separation of benzene/cyclohexane mixtures

High adsorption selectivities for benzene and cyclohexane of three covalent triazine frameworks have been prepared via Friedel–Crafts reactions.

Nitrogen-rich covalent triazine frameworks for high-efficient removal of anion dyes and the synergistic adsorption of cationic dyes

Efficient adsorption of organic dyes from effluent has great importance for ecological and environmental protection. Herein, covalent triazine frameworks (CTFs) were constructed via the polycondensation of melamine and cyanuric chloride directly. Due to the numerous basic nitrogen atoms as high as 58.98 wt%, high BET surface area (670.2 m g^-1), and hierarchical pore structure, CTFs demonstrated selective adsorption of anionic dyes in high capacity (e.g., a maximum adsorption capacity of 1581 mg g^-1 for Congo red at 30 °C). The mechanism of the outstanding adsorption performance was carefully verified and ascribed to the electrostatic attraction and hydrogen bonding between CTFs and anionic dyes. The amine groups linking two adjacent triazine rings have primary responsibility for the superior performance. Unexpectedly, CTFs expressed a tuning synergetic effect for removing cationic dyes in aqueous solution coexisting with anionic dyes, exhibiting a great superiority in the specific and comprehensive treatment of organic dyes contaminated water. Furthermore, CTFs were stable and had long-periodic availability for more than 6 times, ensuring the adsorption rate higher than 90%. For better operation, hybrid monolithic aerogels were constructed by incorporating CTFs into polyvinylidene fluoride then casting in melamine resin foams. The obtained aerogels expressed high-efficient removal of anionic dyes coupled with convenient operation. This well-established metal-free porous material is a promising adsorbent candidate for anionic dyes selectively and even synergetic adsorption of cationic dyes in water remediation.

Postsynthetically Modified Polymers of Intrinsic Microporosity (PIMs) for Capturing Toxic Gases

Polymers of intrinsic microporosity (PIMs) are promising materials for gas adsorption because of their high surface area, processability, and tailorable backbone. Specifically, nitrile groups on the backbone of PIM-1, an archetypal PIM, can be converted to other functional groups to selectively capture targeted gas molecules. Despite these appealing features of PIMs, their potential has mainly only been realized for the separation of nontoxic gases. Here, we prepared PIM-1 materials modified with carboxylic acid and amidoxime functional groups and investigated their performance as adsorbents for the capture of ammonia (NH₃) and sulfur dioxide (SO₂) gases. After determining the Brønsted acidity or basicity of the PIMs from potentiometric acid-base titrations, which can be correlated with affinity for acidic or basic toxic gases, we explored the uptake capacity toward NH₃ and SO₂, respectively. Gas sorption studies revealed that the carboxylated PIM showed higher affinity toward NH₃ through the incorporation of Brønsted acid sites, while the amidoxime functionalized PIM exhibited affinity toward SO₂ through the installed of slightly basic functional groups. Overall, this study highlights new insight into PIMs as solid sorbent materials for capturing toxic gases, which can be transferred to their potential use in practical applications, such as personal protective equipment or air filtration.

Quantitative Structure-Activity Relationship of Nanowire Adsorption to SO2 Revealed by In Situ TEM Technique

A quantitative structure-activity relationship (QSAR) is revealed based on the real-time sulfurization processes of ZnO nanowires observed via gas-cell in situ transmission electron microscopy (in situ TEM). According to the in situ TEM observations, the ZnO nanowires with a diameter of 100 nm (ZnO-100 nm) gradually transform into a core-shell nanostructure under SO₂ atmosphere, and the shell formation kinetics are quantitatively determined. However, only sparse nanoparticles can be observed on the surface of the ZnO-500 nm sample, which implies a weak solid-gas interaction between SO₂ and ZnO-500 nm. The QSAR model is verified with heat of adsorption (-ΔH°) and aberration-corrected TEM characterization. With the guidance of the QSAR model, the following adsorbing/sensing applications of ZnO nanomaterials are explored: (i) breakthrough experiment demonstrates the application potential of the ZnO-100 nm sample for SO₂ capture/storage; (ii) the ZnO-500 nm sample features good reversibility (RSD = 1.5%, n = 3) for SO₂ sensing, and the detection limit reaches 70 ppb.

Superhydrophobic Surface-Constructed Membrane Contactor with Hierarchical Lotus-Leaf-Like Interfaces for Efficient SO2 Capture

An organic-inorganic polyvinylidene fluoride/polyvinylidene fluoride-silica (PVDF/PVDF-SiO₂) mixed matrix membrane contactor is fabricated via a facile and efficient hydrophobic modification method. The solubility parameters of the PVDF particle are precisely regulated, the PVDF particles are blended with SiO₂ nanoparticles to form PVDF-SiO₂ suspension, and then the suspension is introduced onto the surface of the PVDF substrate by an in situ spin coating strategy. The PVDF particles are partly etched and incorporated to construct the adhesive PVDF-SiO₂ core-shell layer on the PVDF substrate, which results in a more stable PVDF-SiO₂ coating layer on the substrate. The surface structure is precisely regulated by changing the etching morphology of PVDF particles and amount of doped PVDF and SiO₂ particles, forming an integrated porous PVDF-SiO₂ layer and constructing hierarchical lotus-leaf-like interfaces. The resultant PVDF/PVDF-SiO₂ membrane contactors display the relatively regular distribution of pore size with ∼420 nm and excellent hydrophobic property with a water contact angle of ∼158°, which noticeably lightens wetting phenomena of membrane contactors. The SO₂ absorption fluxes can reach as high as 1.26 × 10^-3 mol·m^-2·s^-1 using 0.625 M of ethanolamine (EA) as liquid absorbent. The high stability of the SO₂ absorption flux test indicates the excellent interface compatibility between the PVDF-SiO₂ coating layer and the PVDF substrate. The versatile organic-inorganic layer exhibits super hydrophobic property, which prevents wetting of membrane pores. In addition, the membrane mass transfer resistance (H/K_m) and membrane phase transfer coefficient (K_m) are explored.

Metal-Assisted and Solvent-Mediated Synthesis of Two-Dimensional Triazine Structures on Gram Scale

Covalent triazine frameworks are an emerging material class that have shown promising performance for a range of applications. In this work, we report on a metal-assisted and solvent-mediated reaction between calcium carbide and cyanuric chloride, as cheap and commercially available precursors, to synthesize two-dimensional triazine structures (2DTSs). The reaction between the solvent, dimethylformamide, and cyanuric chloride was promoted by calcium carbide and resulted in dimethylamino-s-triazine intermediates, which in turn undergo nucleophilic substitutions. This reaction was directed into two dimensions by calcium ions derived from calcium carbide and induced the formation of 2DTSs. The role of calcium ions to direct the two-dimensionality of the final structure was simulated using DFT and further proven by synthesizing molecular intermediates. The water content of the reaction medium was found to be a crucial factor that affected the structure of the products dramatically. While 2DTSs were obtained under anhydrous conditions, a mixture of graphitic material/2DTSs or only graphitic material (GM) was obtained in aqueous solutions. Due to the straightforward and gram-scale synthesis of 2DTSs, as well as their photothermal and photodynamic properties, they are promising materials for a wide range of future applications, including bacteria and virus incapacitation.